linux/drivers/usb/host/xhci-rzv2m.c
Biju Das c52c9acc41 xhci: host: Add Renesas RZ/V2M SoC support
RZ/V2M is similar to R-Car XHCI but it doesn't require any
firmware, we need to reset the USB Host reset release in DRD Module
before accessing host registers.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230121145853.4792-10-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-25 15:48:17 +01:00

39 lines
838 B
C

// SPDX-License-Identifier: GPL-2.0
/*
* xHCI host controller driver for RZ/V2M
*
* Copyright (C) 2022 Renesas Electronics Corporation
*/
#include <linux/usb/rzv2m_usb3drd.h>
#include "xhci-plat.h"
#include "xhci-rzv2m.h"
#define RZV2M_USB3_INTEN 0x1044 /* Interrupt Enable */
#define RZV2M_USB3_INT_XHC_ENA BIT(0)
#define RZV2M_USB3_INT_HSE_ENA BIT(2)
#define RZV2M_USB3_INT_ENA_VAL (RZV2M_USB3_INT_XHC_ENA \
| RZV2M_USB3_INT_HSE_ENA)
int xhci_rzv2m_init_quirk(struct usb_hcd *hcd)
{
struct device *dev = hcd->self.controller;
rzv2m_usb3drd_reset(dev->parent, true);
return 0;
}
void xhci_rzv2m_start(struct usb_hcd *hcd)
{
u32 int_en;
if (hcd->regs) {
/* Interrupt Enable */
int_en = readl(hcd->regs + RZV2M_USB3_INTEN);
int_en |= RZV2M_USB3_INT_ENA_VAL;
writel(int_en, hcd->regs + RZV2M_USB3_INTEN);
}
}