Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-02 10:11:36 +00:00
Code Issues Packages Projects Releases Wiki Activity
29786e19cd
linux/drivers/scsi/mpt2sas/mpt2sas_base.c
Kashyap, Desai 29786e19cd [SCSI] mpt2sas: Timeout occurred within the HANDSHAKE logic while waiting on firmware to ACK. 
Following a diag_reset, a request to send an ioc_init is timing out.  The
timeout occurred within the HANDSHAKE logic while waiting on firmware to
acknowledge that the driver had wrote to the doorbell register.  This was
root caused to a logic timeout in the firmware code.  The proposed solution
is for the driver to call the udelay instead of msleep API in function where
its looping reading the interrupt status.  In addition to this change, there
were two additional cases where we deleted the clearing interrupt status
outside handshake context.

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02 09:49:01 -05:00

3719 lines
105 KiB
C
Raw Blame History

/*
* This is the Fusion MPT base driver providing common API layer interface
* for access to MPT (Message Passing Technology) firmware.
*
* This code is based on drivers/scsi/mpt2sas/mpt2_base.c
* Copyright (C) 2007-2009 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* NO WARRANTY
* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
* solely responsible for determining the appropriateness of using and
* distributing the Program and assumes all risks associated with its
* exercise of rights under this Agreement, including but not limited to
* the risks and costs of program errors, damage to or loss of data,
* programs or equipment, and unavailability or interruption of operations.
* DISCLAIMER OF LIABILITY
* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
* USA.
*/
#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/sort.h>
#include <linux/io.h>
#include "mpt2sas_base.h"
static MPT_CALLBACK mpt_callbacks[MPT_MAX_CALLBACKS];
#define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */
#define MPT2SAS_MAX_REQUEST_QUEUE 600 /* maximum controller queue depth */
static int max_queue_depth = -1;
module_param(max_queue_depth, int, 0);
MODULE_PARM_DESC(max_queue_depth, " max controller queue depth ");
static int max_sgl_entries = -1;
module_param(max_sgl_entries, int, 0);
MODULE_PARM_DESC(max_sgl_entries, " max sg entries ");
static int msix_disable = -1;
module_param(msix_disable, int, 0);
MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)");
/**
* _base_fault_reset_work - workq handling ioc fault conditions
* @work: input argument, used to derive ioc
* Context: sleep.
*
* Return nothing.
*/
static void
_base_fault_reset_work(struct work_struct *work)
{
struct MPT2SAS_ADAPTER *ioc =
container_of(work, struct MPT2SAS_ADAPTER, fault_reset_work.work);
unsigned long flags;
u32 doorbell;
int rc;
spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
if (ioc->shost_recovery)
goto rearm_timer;
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
doorbell = mpt2sas_base_get_iocstate(ioc, 0);
if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
printk(MPT2SAS_WARN_FMT "%s: hard reset: %s\n", ioc->name,
__func__, (rc == 0) ? "success" : "failed");
doorbell = mpt2sas_base_get_iocstate(ioc, 0);
if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
mpt2sas_base_fault_info(ioc, doorbell &
MPI2_DOORBELL_DATA_MASK);
}
spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
rearm_timer:
if (ioc->fault_reset_work_q)
queue_delayed_work(ioc->fault_reset_work_q,
&ioc->fault_reset_work,
msecs_to_jiffies(FAULT_POLLING_INTERVAL));
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
}
/**
* mpt2sas_base_start_watchdog - start the fault_reset_work_q
* @ioc: pointer to scsi command object
* Context: sleep.
*
* Return nothing.
*/
void
mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc)
{
unsigned long flags;
if (ioc->fault_reset_work_q)
return;
/* initialize fault polling */
INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
snprintf(ioc->fault_reset_work_q_name,
sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
ioc->fault_reset_work_q =
create_singlethread_workqueue(ioc->fault_reset_work_q_name);
if (!ioc->fault_reset_work_q) {
printk(MPT2SAS_ERR_FMT "%s: failed (line=%d)\n",
ioc->name, __func__, __LINE__);
return;
}
spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
if (ioc->fault_reset_work_q)
queue_delayed_work(ioc->fault_reset_work_q,
&ioc->fault_reset_work,
msecs_to_jiffies(FAULT_POLLING_INTERVAL));
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
}
/**
* mpt2sas_base_stop_watchdog - stop the fault_reset_work_q
* @ioc: pointer to scsi command object
* Context: sleep.
*
* Return nothing.
*/
void
mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc)
{
unsigned long flags;
struct workqueue_struct *wq;
spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
wq = ioc->fault_reset_work_q;
ioc->fault_reset_work_q = NULL;
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
if (wq) {
if (!cancel_delayed_work(&ioc->fault_reset_work))
flush_workqueue(wq);
destroy_workqueue(wq);
}
}
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
/**
* _base_sas_ioc_info - verbose translation of the ioc status
* @ioc: pointer to scsi command object
* @mpi_reply: reply mf payload returned from firmware
* @request_hdr: request mf
*
* Return nothing.
*/
static void
_base_sas_ioc_info(struct MPT2SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply,
MPI2RequestHeader_t *request_hdr)
{
u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) &
MPI2_IOCSTATUS_MASK;
char *desc = NULL;
u16 frame_sz;
char *func_str = NULL;
/* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */
if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
request_hdr->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
request_hdr->Function == MPI2_FUNCTION_EVENT_NOTIFICATION)
return;
switch (ioc_status) {
/****************************************************************************
* Common IOCStatus values for all replies
****************************************************************************/
case MPI2_IOCSTATUS_INVALID_FUNCTION:
desc = "invalid function";
break;
case MPI2_IOCSTATUS_BUSY:
desc = "busy";
break;
case MPI2_IOCSTATUS_INVALID_SGL:
desc = "invalid sgl";
break;
case MPI2_IOCSTATUS_INTERNAL_ERROR:
desc = "internal error";
break;
case MPI2_IOCSTATUS_INVALID_VPID:
desc = "invalid vpid";
break;
case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
desc = "insufficient resources";
break;
case MPI2_IOCSTATUS_INVALID_FIELD:
desc = "invalid field";
break;
case MPI2_IOCSTATUS_INVALID_STATE:
desc = "invalid state";
break;
case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED:
desc = "op state not supported";
break;
/****************************************************************************
* Config IOCStatus values
****************************************************************************/
case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION:
desc = "config invalid action";
break;
case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE:
desc = "config invalid type";
break;
case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE:
desc = "config invalid page";
break;
case MPI2_IOCSTATUS_CONFIG_INVALID_DATA:
desc = "config invalid data";
break;
case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS:
desc = "config no defaults";
break;
case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT:
desc = "config cant commit";
break;
/****************************************************************************
* SCSI IO Reply
****************************************************************************/
case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
break;
/****************************************************************************
* For use by SCSI Initiator and SCSI Target end-to-end data protection
****************************************************************************/
case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
desc = "eedp guard error";
break;
case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
desc = "eedp ref tag error";
break;
case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
desc = "eedp app tag error";
break;
/****************************************************************************
* SCSI Target values
****************************************************************************/
case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX:
desc = "target invalid io index";
break;
case MPI2_IOCSTATUS_TARGET_ABORTED:
desc = "target aborted";
break;
case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE:
desc = "target no conn retryable";
break;
case MPI2_IOCSTATUS_TARGET_NO_CONNECTION:
desc = "target no connection";
break;
case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH:
desc = "target xfer count mismatch";
break;
case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR:
desc = "target data offset error";
break;
case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA:
desc = "target too much write data";
break;
case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT:
desc = "target iu too short";
break;
case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT:
desc = "target ack nak timeout";
break;
case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED:
desc = "target nak received";
break;
/****************************************************************************
* Serial Attached SCSI values
****************************************************************************/
case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED:
desc = "smp request failed";
break;
case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN:
desc = "smp data overrun";
break;
/****************************************************************************
* Diagnostic Buffer Post / Diagnostic Release values
****************************************************************************/
case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED:
desc = "diagnostic released";
break;
default:
break;
}
if (!desc)
return;
switch (request_hdr->Function) {
case MPI2_FUNCTION_CONFIG:
frame_sz = sizeof(Mpi2ConfigRequest_t) + ioc->sge_size;
func_str = "config_page";
break;
case MPI2_FUNCTION_SCSI_TASK_MGMT:
frame_sz = sizeof(Mpi2SCSITaskManagementRequest_t);
func_str = "task_mgmt";
break;
case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
frame_sz = sizeof(Mpi2SasIoUnitControlRequest_t);
func_str = "sas_iounit_ctl";
break;
case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR:
frame_sz = sizeof(Mpi2SepRequest_t);
func_str = "enclosure";
break;
case MPI2_FUNCTION_IOC_INIT:
frame_sz = sizeof(Mpi2IOCInitRequest_t);
func_str = "ioc_init";
break;
case MPI2_FUNCTION_PORT_ENABLE:
frame_sz = sizeof(Mpi2PortEnableRequest_t);
func_str = "port_enable";
break;
case MPI2_FUNCTION_SMP_PASSTHROUGH:
frame_sz = sizeof(Mpi2SmpPassthroughRequest_t) + ioc->sge_size;
func_str = "smp_passthru";
break;
default:
frame_sz = 32;
func_str = "unknown";
break;
}
printk(MPT2SAS_WARN_FMT "ioc_status: %s(0x%04x), request(0x%p),"
" (%s)\n", ioc->name, desc, ioc_status, request_hdr, func_str);
_debug_dump_mf(request_hdr, frame_sz/4);
}
/**
* _base_display_event_data - verbose translation of firmware asyn events
* @ioc: pointer to scsi command object
* @mpi_reply: reply mf payload returned from firmware
*
* Return nothing.
*/
static void
_base_display_event_data(struct MPT2SAS_ADAPTER *ioc,
Mpi2EventNotificationReply_t *mpi_reply)
{
char *desc = NULL;
u16 event;
if (!(ioc->logging_level & MPT_DEBUG_EVENTS))
return;
event = le16_to_cpu(mpi_reply->Event);
switch (event) {
case MPI2_EVENT_LOG_DATA:
desc = "Log Data";
break;
case MPI2_EVENT_STATE_CHANGE:
desc = "Status Change";
break;
case MPI2_EVENT_HARD_RESET_RECEIVED:
desc = "Hard Reset Received";
break;
case MPI2_EVENT_EVENT_CHANGE:
desc = "Event Change";
break;
case MPI2_EVENT_TASK_SET_FULL:
desc = "Task Set Full";
break;
case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
desc = "Device Status Change";
break;
case MPI2_EVENT_IR_OPERATION_STATUS:
desc = "IR Operation Status";
break;
case MPI2_EVENT_SAS_DISCOVERY:
desc = "Discovery";
break;
case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
desc = "SAS Broadcast Primitive";
break;
case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
desc = "SAS Init Device Status Change";
break;
case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW:
desc = "SAS Init Table Overflow";
break;
case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
desc = "SAS Topology Change List";
break;
case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
desc = "SAS Enclosure Device Status Change";
break;
case MPI2_EVENT_IR_VOLUME:
desc = "IR Volume";
break;
case MPI2_EVENT_IR_PHYSICAL_DISK:
desc = "IR Physical Disk";
break;
case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
desc = "IR Configuration Change List";
break;
case MPI2_EVENT_LOG_ENTRY_ADDED:
desc = "Log Entry Added";
break;
}
if (!desc)
return;
printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, desc);
}
#endif
/**
* _base_sas_log_info - verbose translation of firmware log info
* @ioc: pointer to scsi command object
* @log_info: log info
*
* Return nothing.
*/
static void
_base_sas_log_info(struct MPT2SAS_ADAPTER *ioc , u32 log_info)
{
union loginfo_type {
u32 loginfo;
struct {
u32 subcode:16;
u32 code:8;
u32 originator:4;
u32 bus_type:4;
} dw;
};
union loginfo_type sas_loginfo;
char *originator_str = NULL;
sas_loginfo.loginfo = log_info;
if (sas_loginfo.dw.bus_type != 3 /*SAS*/)
return;
/* each nexus loss loginfo */
if (log_info == 0x31170000)
return;
/* eat the loginfos associated with task aborts */
if (ioc->ignore_loginfos && (log_info == 30050000 || log_info ==
0x31140000 || log_info == 0x31130000))
return;
switch (sas_loginfo.dw.originator) {
case 0:
originator_str = "IOP";
break;
case 1:
originator_str = "PL";
break;
case 2:
originator_str = "IR";
break;
}
printk(MPT2SAS_WARN_FMT "log_info(0x%08x): originator(%s), "
"code(0x%02x), sub_code(0x%04x)\n", ioc->name, log_info,
originator_str, sas_loginfo.dw.code,
sas_loginfo.dw.subcode);
}
/**
* mpt2sas_base_fault_info - verbose translation of firmware FAULT code
* @ioc: pointer to scsi command object
* @fault_code: fault code
*
* Return nothing.
*/
void
mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER *ioc , u16 fault_code)
{
printk(MPT2SAS_ERR_FMT "fault_state(0x%04x)!\n",
ioc->name, fault_code);
}
/**
* _base_display_reply_info -
* @ioc: pointer to scsi command object
* @smid: system request message index
* @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
*
* Return nothing.
*/
static void
_base_display_reply_info(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
u32 reply)
{
MPI2DefaultReply_t *mpi_reply;
u16 ioc_status;
mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
if ((ioc_status & MPI2_IOCSTATUS_MASK) &&
(ioc->logging_level & MPT_DEBUG_REPLY)) {
_base_sas_ioc_info(ioc , mpi_reply,
mpt2sas_base_get_msg_frame(ioc, smid));
}
#endif
if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
_base_sas_log_info(ioc, le32_to_cpu(mpi_reply->IOCLogInfo));
}
/**
* mpt2sas_base_done - base internal command completion routine
* @ioc: pointer to scsi command object
* @smid: system request message index
* @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
*
* Return 1 meaning mf should be freed from _base_interrupt
* 0 means the mf is freed from this function.
*/
u8
mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
u32 reply)
{
MPI2DefaultReply_t *mpi_reply;
mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK)
return 1;
if (ioc->base_cmds.status == MPT2_CMD_NOT_USED)
return 1;
ioc->base_cmds.status |= MPT2_CMD_COMPLETE;
if (mpi_reply) {
ioc->base_cmds.status |= MPT2_CMD_REPLY_VALID;
memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
}
ioc->base_cmds.status &= ~MPT2_CMD_PENDING;
complete(&ioc->base_cmds.done);
return 1;
}
/**
* _base_async_event - main callback handler for firmware asyn events
* @ioc: pointer to scsi command object
* @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
*
* Return 1 meaning mf should be freed from _base_interrupt
* 0 means the mf is freed from this function.
*/
static u8
_base_async_event(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, u32 reply)
{
Mpi2EventNotificationReply_t *mpi_reply;
Mpi2EventAckRequest_t *ack_request;
u16 smid;
mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
if (!mpi_reply)
return 1;
if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION)
return 1;
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
_base_display_event_data(ioc, mpi_reply);
#endif
if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED))
goto out;
smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
goto out;
}
ack_request = mpt2sas_base_get_msg_frame(ioc, smid);
memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t));
ack_request->Function = MPI2_FUNCTION_EVENT_ACK;
ack_request->Event = mpi_reply->Event;
ack_request->EventContext = mpi_reply->EventContext;
ack_request->VF_ID = 0; /* TODO */
ack_request->VP_ID = 0;
mpt2sas_base_put_smid_default(ioc, smid);
out:
/* scsih callback handler */
mpt2sas_scsih_event_callback(ioc, msix_index, reply);
/* ctl callback handler */
mpt2sas_ctl_event_callback(ioc, msix_index, reply);
return 1;
}
/**
* _base_get_cb_idx - obtain the callback index
* @ioc: per adapter object
* @smid: system request message index
*
* Return callback index.
*/
static u8
_base_get_cb_idx(struct MPT2SAS_ADAPTER *ioc, u16 smid)
{
int i;
u8 cb_idx = 0xFF;
if (smid >= ioc->hi_priority_smid) {
if (smid < ioc->internal_smid) {
i = smid - ioc->hi_priority_smid;
cb_idx = ioc->hpr_lookup[i].cb_idx;
} else {
i = smid - ioc->internal_smid;
cb_idx = ioc->internal_lookup[i].cb_idx;
}
} else {
i = smid - 1;
cb_idx = ioc->scsi_lookup[i].cb_idx;
}
return cb_idx;
}
/**
* _base_mask_interrupts - disable interrupts
* @ioc: pointer to scsi command object
*
* Disabling ResetIRQ, Reply and Doorbell Interrupts
*
* Return nothing.
*/
static void
_base_mask_interrupts(struct MPT2SAS_ADAPTER *ioc)
{
u32 him_register;
ioc->mask_interrupts = 1;
him_register = readl(&ioc->chip->HostInterruptMask);
him_register |= MPI2_HIM_DIM + MPI2_HIM_RIM + MPI2_HIM_RESET_IRQ_MASK;
writel(him_register, &ioc->chip->HostInterruptMask);
readl(&ioc->chip->HostInterruptMask);
}
/**
* _base_unmask_interrupts - enable interrupts
* @ioc: pointer to scsi command object
*
* Enabling only Reply Interrupts
*
* Return nothing.
*/
static void
_base_unmask_interrupts(struct MPT2SAS_ADAPTER *ioc)
{
u32 him_register;
him_register = readl(&ioc->chip->HostInterruptMask);
him_register &= ~MPI2_HIM_RIM;
writel(him_register, &ioc->chip->HostInterruptMask);
ioc->mask_interrupts = 0;
}
union reply_descriptor {
u64 word;
struct {
u32 low;
u32 high;
} u;
};
/**
* _base_interrupt - MPT adapter (IOC) specific interrupt handler.
* @irq: irq number (not used)
* @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
* @r: pt_regs pointer (not used)
*
* Return IRQ_HANDLE if processed, else IRQ_NONE.
*/
static irqreturn_t
_base_interrupt(int irq, void *bus_id)
{
union reply_descriptor rd;
u32 completed_cmds;
u8 request_desript_type;
u16 smid;
u8 cb_idx;
u32 reply;
u8 msix_index;
struct MPT2SAS_ADAPTER *ioc = bus_id;
Mpi2ReplyDescriptorsUnion_t *rpf;
u8 rc;
if (ioc->mask_interrupts)
return IRQ_NONE;
rpf = &ioc->reply_post_free[ioc->reply_post_host_index];
request_desript_type = rpf->Default.ReplyFlags
& MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
return IRQ_NONE;
completed_cmds = 0;
do {
rd.word = rpf->Words;
if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX)
goto out;
reply = 0;
cb_idx = 0xFF;
smid = le16_to_cpu(rpf->Default.DescriptorTypeDependent1);
msix_index = rpf->Default.MSIxIndex;
if (request_desript_type ==
MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) {
reply = le32_to_cpu
(rpf->AddressReply.ReplyFrameAddress);
} else if (request_desript_type ==
MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER)
goto next;
else if (request_desript_type ==
MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS)
goto next;
if (smid)
cb_idx = _base_get_cb_idx(ioc, smid);
if (smid && cb_idx != 0xFF) {
rc = mpt_callbacks[cb_idx](ioc, smid, msix_index,
reply);
if (reply)
_base_display_reply_info(ioc, smid, msix_index,
reply);
if (rc)
mpt2sas_base_free_smid(ioc, smid);
}
if (!smid)
_base_async_event(ioc, msix_index, reply);
/* reply free queue handling */
if (reply) {
ioc->reply_free_host_index =
(ioc->reply_free_host_index ==
(ioc->reply_free_queue_depth - 1)) ?
0 : ioc->reply_free_host_index + 1;
ioc->reply_free[ioc->reply_free_host_index] =
cpu_to_le32(reply);
wmb();
writel(ioc->reply_free_host_index,
&ioc->chip->ReplyFreeHostIndex);
}
next:
rpf->Words = ULLONG_MAX;
ioc->reply_post_host_index = (ioc->reply_post_host_index ==
(ioc->reply_post_queue_depth - 1)) ? 0 :
ioc->reply_post_host_index + 1;
request_desript_type =
ioc->reply_post_free[ioc->reply_post_host_index].Default.
ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
completed_cmds++;
if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
goto out;
if (!ioc->reply_post_host_index)
rpf = ioc->reply_post_free;
else
rpf++;
} while (1);
out:
if (!completed_cmds)
return IRQ_NONE;
wmb();
writel(ioc->reply_post_host_index, &ioc->chip->ReplyPostHostIndex);
return IRQ_HANDLED;
}
/**
* mpt2sas_base_release_callback_handler - clear interupt callback handler
* @cb_idx: callback index
*
* Return nothing.
*/
void
mpt2sas_base_release_callback_handler(u8 cb_idx)
{
mpt_callbacks[cb_idx] = NULL;
}
/**
* mpt2sas_base_register_callback_handler - obtain index for the interrupt callback handler
* @cb_func: callback function
*
* Returns cb_func.
*/
u8
mpt2sas_base_register_callback_handler(MPT_CALLBACK cb_func)
{
u8 cb_idx;
for (cb_idx = MPT_MAX_CALLBACKS-1; cb_idx; cb_idx--)
if (mpt_callbacks[cb_idx] == NULL)
break;
mpt_callbacks[cb_idx] = cb_func;
return cb_idx;
}
/**
* mpt2sas_base_initialize_callback_handler - initialize the interrupt callback handler
*
* Return nothing.
*/
void
mpt2sas_base_initialize_callback_handler(void)
{
u8 cb_idx;
for (cb_idx = 0; cb_idx < MPT_MAX_CALLBACKS; cb_idx++)
mpt2sas_base_release_callback_handler(cb_idx);
}
/**
* mpt2sas_base_build_zero_len_sge - build zero length sg entry
* @ioc: per adapter object
* @paddr: virtual address for SGE
*
* Create a zero length scatter gather entry to insure the IOCs hardware has
* something to use if the target device goes brain dead and tries
* to send data even when none is asked for.
*
* Return nothing.
*/
void
mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr)
{
u32 flags_length = (u32)((MPI2_SGE_FLAGS_LAST_ELEMENT |
MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST |
MPI2_SGE_FLAGS_SIMPLE_ELEMENT) <<
MPI2_SGE_FLAGS_SHIFT);
ioc->base_add_sg_single(paddr, flags_length, -1);
}
/**
* _base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr.
* @paddr: virtual address for SGE
* @flags_length: SGE flags and data transfer length
* @dma_addr: Physical address
*
* Return nothing.
*/
static void
_base_add_sg_single_32(void *paddr, u32 flags_length, dma_addr_t dma_addr)
{
Mpi2SGESimple32_t *sgel = paddr;
flags_length |= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING |
MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
sgel->FlagsLength = cpu_to_le32(flags_length);
sgel->Address = cpu_to_le32(dma_addr);
}
/**
* _base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr.
* @paddr: virtual address for SGE
* @flags_length: SGE flags and data transfer length
* @dma_addr: Physical address
*
* Return nothing.
*/
static void
_base_add_sg_single_64(void *paddr, u32 flags_length, dma_addr_t dma_addr)
{
Mpi2SGESimple64_t *sgel = paddr;
flags_length |= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING |
MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
sgel->FlagsLength = cpu_to_le32(flags_length);
sgel->Address = cpu_to_le64(dma_addr);
}
#define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10))
/**
* _base_config_dma_addressing - set dma addressing
* @ioc: per adapter object
* @pdev: PCI device struct
*
* Returns 0 for success, non-zero for failure.
*/
static int
_base_config_dma_addressing(struct MPT2SAS_ADAPTER *ioc, struct pci_dev *pdev)
{
struct sysinfo s;
char *desc = NULL;
if (sizeof(dma_addr_t) > 4) {
const uint64_t required_mask =
dma_get_required_mask(&pdev->dev);
if ((required_mask > DMA_BIT_MASK(32)) && !pci_set_dma_mask(pdev,
DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(pdev,
DMA_BIT_MASK(64))) {
ioc->base_add_sg_single = &_base_add_sg_single_64;
ioc->sge_size = sizeof(Mpi2SGESimple64_t);
desc = "64";
goto out;
}
}
if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
&& !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
ioc->base_add_sg_single = &_base_add_sg_single_32;
ioc->sge_size = sizeof(Mpi2SGESimple32_t);
desc = "32";
} else
return -ENODEV;
out:
si_meminfo(&s);
printk(MPT2SAS_INFO_FMT "%s BIT PCI BUS DMA ADDRESSING SUPPORTED, "
"total mem (%ld kB)\n", ioc->name, desc, convert_to_kb(s.totalram));
return 0;
}
/**
* _base_save_msix_table - backup msix vector table
* @ioc: per adapter object
*
* This address an errata where diag reset clears out the table
*/
static void
_base_save_msix_table(struct MPT2SAS_ADAPTER *ioc)
{
int i;
if (!ioc->msix_enable || ioc->msix_table_backup == NULL)
return;
for (i = 0; i < ioc->msix_vector_count; i++)
ioc->msix_table_backup[i] = ioc->msix_table[i];
}
/**
* _base_restore_msix_table - this restores the msix vector table
* @ioc: per adapter object
*
*/
static void
_base_restore_msix_table(struct MPT2SAS_ADAPTER *ioc)
{
int i;
if (!ioc->msix_enable || ioc->msix_table_backup == NULL)
return;
for (i = 0; i < ioc->msix_vector_count; i++)
ioc->msix_table[i] = ioc->msix_table_backup[i];
}
/**
* _base_check_enable_msix - checks MSIX capabable.
* @ioc: per adapter object
*
* Check to see if card is capable of MSIX, and set number
* of avaliable msix vectors
*/
static int
_base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc)
{
int base;
u16 message_control;
u32 msix_table_offset;
base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);
if (!base) {
dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "msix not "
"supported\n", ioc->name));
return -EINVAL;
}
/* get msix vector count */
pci_read_config_word(ioc->pdev, base + 2, &message_control);
ioc->msix_vector_count = (message_control & 0x3FF) + 1;
/* get msix table */
pci_read_config_dword(ioc->pdev, base + 4, &msix_table_offset);
msix_table_offset &= 0xFFFFFFF8;
ioc->msix_table = (u32 *)((void *)ioc->chip + msix_table_offset);
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "msix is supported, "
"vector_count(%d), table_offset(0x%08x), table(%p)\n", ioc->name,
ioc->msix_vector_count, msix_table_offset, ioc->msix_table));
return 0;
}
/**
* _base_disable_msix - disables msix
* @ioc: per adapter object
*
*/
static void
_base_disable_msix(struct MPT2SAS_ADAPTER *ioc)
{
if (ioc->msix_enable) {
pci_disable_msix(ioc->pdev);
kfree(ioc->msix_table_backup);
ioc->msix_table_backup = NULL;
ioc->msix_enable = 0;
}
}
/**
* _base_enable_msix - enables msix, failback to io_apic
* @ioc: per adapter object
*
*/
static int
_base_enable_msix(struct MPT2SAS_ADAPTER *ioc)
{
struct msix_entry entries;
int r;
u8 try_msix = 0;
if (msix_disable == -1 || msix_disable == 0)
try_msix = 1;
if (!try_msix)
goto try_ioapic;
if (_base_check_enable_msix(ioc) != 0)
goto try_ioapic;
ioc->msix_table_backup = kcalloc(ioc->msix_vector_count,
sizeof(u32), GFP_KERNEL);
if (!ioc->msix_table_backup) {
dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "allocation for "
"msix_table_backup failed!!!\n", ioc->name));
goto try_ioapic;
}
memset(&entries, 0, sizeof(struct msix_entry));
r = pci_enable_msix(ioc->pdev, &entries, 1);
if (r) {
dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "pci_enable_msix "
"failed (r=%d) !!!\n", ioc->name, r));
goto try_ioapic;
}
r = request_irq(entries.vector, _base_interrupt, IRQF_SHARED,
ioc->name, ioc);
if (r) {
dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "unable to allocate "
"interrupt %d !!!\n", ioc->name, entries.vector));
pci_disable_msix(ioc->pdev);
goto try_ioapic;
}
ioc->pci_irq = entries.vector;
ioc->msix_enable = 1;
return 0;
/* failback to io_apic interrupt routing */
try_ioapic:
r = request_irq(ioc->pdev->irq, _base_interrupt, IRQF_SHARED,
ioc->name, ioc);
if (r) {
printk(MPT2SAS_ERR_FMT "unable to allocate interrupt %d!\n",
ioc->name, ioc->pdev->irq);
r = -EBUSY;
goto out_fail;
}
ioc->pci_irq = ioc->pdev->irq;
return 0;
out_fail:
return r;
}
/**
* mpt2sas_base_map_resources - map in controller resources (io/irq/memap)
* @ioc: per adapter object
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc)
{
struct pci_dev *pdev = ioc->pdev;
u32 memap_sz;
u32 pio_sz;
int i, r = 0;
dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n",
ioc->name, __func__));
ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
if (pci_enable_device_mem(pdev)) {
printk(MPT2SAS_WARN_FMT "pci_enable_device_mem: "
"failed\n", ioc->name);
return -ENODEV;
}
if (pci_request_selected_regions(pdev, ioc->bars,
MPT2SAS_DRIVER_NAME)) {
printk(MPT2SAS_WARN_FMT "pci_request_selected_regions: "
"failed\n", ioc->name);
r = -ENODEV;
goto out_fail;
}
pci_set_master(pdev);
if (_base_config_dma_addressing(ioc, pdev) != 0) {
printk(MPT2SAS_WARN_FMT "no suitable DMA mask for %s\n",
ioc->name, pci_name(pdev));
r = -ENODEV;
goto out_fail;
}
for (i = 0, memap_sz = 0, pio_sz = 0 ; i < DEVICE_COUNT_RESOURCE; i++) {
if (pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE_IO) {
if (pio_sz)
continue;
ioc->pio_chip = pci_resource_start(pdev, i);
pio_sz = pci_resource_len(pdev, i);
} else {
if (memap_sz)
continue;
ioc->chip_phys = pci_resource_start(pdev, i);
memap_sz = pci_resource_len(pdev, i);
ioc->chip = ioremap(ioc->chip_phys, memap_sz);
if (ioc->chip == NULL) {
printk(MPT2SAS_ERR_FMT "unable to map adapter "
"memory!\n", ioc->name);
r = -EINVAL;
goto out_fail;
}
}
}
_base_mask_interrupts(ioc);
r = _base_enable_msix(ioc);
if (r)
goto out_fail;
printk(MPT2SAS_INFO_FMT "%s: IRQ %d\n",
ioc->name, ((ioc->msix_enable) ? "PCI-MSI-X enabled" :
"IO-APIC enabled"), ioc->pci_irq);
printk(MPT2SAS_INFO_FMT "iomem(0x%lx), mapped(0x%p), size(%d)\n",
ioc->name, ioc->chip_phys, ioc->chip, memap_sz);
printk(MPT2SAS_INFO_FMT "ioport(0x%lx), size(%d)\n",
ioc->name, ioc->pio_chip, pio_sz);
return 0;
out_fail:
if (ioc->chip_phys)
iounmap(ioc->chip);
ioc->chip_phys = 0;
ioc->pci_irq = -1;
pci_release_selected_regions(ioc->pdev, ioc->bars);
pci_disable_device(pdev);
return r;
}
/**
* mpt2sas_base_get_msg_frame - obtain request mf pointer
* @ioc: per adapter object
* @smid: system request message index(smid zero is invalid)
*
* Returns virt pointer to message frame.
*/
void *
mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER *ioc, u16 smid)
{
return (void *)(ioc->request + (smid * ioc->request_sz));
}
/**
* mpt2sas_base_get_sense_buffer - obtain a sense buffer assigned to a mf request
* @ioc: per adapter object
* @smid: system request message index
*
* Returns virt pointer to sense buffer.
*/
void *
mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid)
{
return (void *)(ioc->sense + ((smid - 1) * SCSI_SENSE_BUFFERSIZE));
}
/**
* mpt2sas_base_get_sense_buffer_dma - obtain a sense buffer assigned to a mf request
* @ioc: per adapter object
* @smid: system request message index
*
* Returns phys pointer to sense buffer.
*/
dma_addr_t
mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid)
{
return ioc->sense_dma + ((smid - 1) * SCSI_SENSE_BUFFERSIZE);
}
/**
* mpt2sas_base_get_reply_virt_addr - obtain reply frames virt address
* @ioc: per adapter object
* @phys_addr: lower 32 physical addr of the reply
*
* Converts 32bit lower physical addr into a virt address.
*/
void *
mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr)
{
if (!phys_addr)
return NULL;
return ioc->reply + (phys_addr - (u32)ioc->reply_dma);
}
/**
* mpt2sas_base_get_smid - obtain a free smid from internal queue
* @ioc: per adapter object
* @cb_idx: callback index
*
* Returns smid (zero is invalid)
*/
u16
mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx)
{
unsigned long flags;
struct request_tracker *request;
u16 smid;
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
if (list_empty(&ioc->internal_free_list)) {
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
printk(MPT2SAS_ERR_FMT "%s: smid not available\n",
ioc->name, __func__);
return 0;
}
request = list_entry(ioc->internal_free_list.next,
struct request_tracker, tracker_list);
request->cb_idx = cb_idx;
smid = request->smid;
list_del(&request->tracker_list);
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
return smid;
}
/**
* mpt2sas_base_get_smid_scsiio - obtain a free smid from scsiio queue
* @ioc: per adapter object
* @cb_idx: callback index
* @scmd: pointer to scsi command object
*
* Returns smid (zero is invalid)
*/
u16
mpt2sas_base_get_smid_scsiio(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx,
struct scsi_cmnd *scmd)
{
unsigned long flags;
struct request_tracker *request;
u16 smid;
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
if (list_empty(&ioc->free_list)) {
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
printk(MPT2SAS_ERR_FMT "%s: smid not available\n",
ioc->name, __func__);
return 0;
}
request = list_entry(ioc->free_list.next,
struct request_tracker, tracker_list);
request->scmd = scmd;
request->cb_idx = cb_idx;
smid = request->smid;
list_del(&request->tracker_list);
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
return smid;
}
/**
* mpt2sas_base_get_smid_hpr - obtain a free smid from hi-priority queue
* @ioc: per adapter object
* @cb_idx: callback index
*
* Returns smid (zero is invalid)
*/
u16
mpt2sas_base_get_smid_hpr(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx)
{
unsigned long flags;
struct request_tracker *request;
u16 smid;
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
if (list_empty(&ioc->hpr_free_list)) {
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
return 0;
}
request = list_entry(ioc->hpr_free_list.next,
struct request_tracker, tracker_list);
request->cb_idx = cb_idx;
smid = request->smid;
list_del(&request->tracker_list);
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
return smid;
}
/**
* mpt2sas_base_free_smid - put smid back on free_list
* @ioc: per adapter object
* @smid: system request message index
*
* Return nothing.
*/
void
mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid)
{
unsigned long flags;
int i;
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
if (smid >= ioc->hi_priority_smid) {
if (smid < ioc->internal_smid) {
/* hi-priority */
i = smid - ioc->hi_priority_smid;
ioc->hpr_lookup[i].cb_idx = 0xFF;
list_add_tail(&ioc->hpr_lookup[i].tracker_list,
&ioc->hpr_free_list);
} else {
/* internal queue */
i = smid - ioc->internal_smid;
ioc->internal_lookup[i].cb_idx = 0xFF;
list_add_tail(&ioc->internal_lookup[i].tracker_list,
&ioc->internal_free_list);
}
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
return;
}
/* scsiio queue */
i = smid - 1;
ioc->scsi_lookup[i].cb_idx = 0xFF;
ioc->scsi_lookup[i].scmd = NULL;
list_add_tail(&ioc->scsi_lookup[i].tracker_list,
&ioc->free_list);
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
/*
* See _wait_for_commands_to_complete() call with regards to this code.
*/
if (ioc->shost_recovery && ioc->pending_io_count) {
if (ioc->pending_io_count == 1)
wake_up(&ioc->reset_wq);
ioc->pending_io_count--;
}
}
/**
* _base_writeq - 64 bit write to MMIO
* @ioc: per adapter object
* @b: data payload
* @addr: address in MMIO space
* @writeq_lock: spin lock
*
* Glue for handling an atomic 64 bit word to MMIO. This special handling takes
* care of 32 bit environment where its not quarenteed to send the entire word
* in one transfer.
*/
#ifndef writeq
static inline void _base_writeq(__u64 b, volatile void __iomem *addr,
spinlock_t *writeq_lock)
{
unsigned long flags;
__u64 data_out = cpu_to_le64(b);
spin_lock_irqsave(writeq_lock, flags);
writel((u32)(data_out), addr);
writel((u32)(data_out >> 32), (addr + 4));
spin_unlock_irqrestore(writeq_lock, flags);
}
#else
static inline void _base_writeq(__u64 b, volatile void __iomem *addr,
spinlock_t *writeq_lock)
{
writeq(cpu_to_le64(b), addr);
}
#endif
/**
* mpt2sas_base_put_smid_scsi_io - send SCSI_IO request to firmware
* @ioc: per adapter object
* @smid: system request message index
* @handle: device handle
*
* Return nothing.
*/
void
mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u16 handle)
{
Mpi2RequestDescriptorUnion_t descriptor;
u64 *request = (u64 *)&descriptor;
descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
descriptor.SCSIIO.MSIxIndex = 0; /* TODO */
descriptor.SCSIIO.SMID = cpu_to_le16(smid);
descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
descriptor.SCSIIO.LMID = 0;
_base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
&ioc->scsi_lookup_lock);
}
/**
* mpt2sas_base_put_smid_hi_priority - send Task Managment request to firmware
* @ioc: per adapter object
* @smid: system request message index
*
* Return nothing.
*/
void
mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid)
{
Mpi2RequestDescriptorUnion_t descriptor;
u64 *request = (u64 *)&descriptor;
descriptor.HighPriority.RequestFlags =
MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY;
descriptor.HighPriority.MSIxIndex = 0; /* TODO */
descriptor.HighPriority.SMID = cpu_to_le16(smid);
descriptor.HighPriority.LMID = 0;
descriptor.HighPriority.Reserved1 = 0;
_base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
&ioc->scsi_lookup_lock);
}
/**
* mpt2sas_base_put_smid_default - Default, primarily used for config pages
* @ioc: per adapter object
* @smid: system request message index
*
* Return nothing.
*/
void
mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid)
{
Mpi2RequestDescriptorUnion_t descriptor;
u64 *request = (u64 *)&descriptor;
descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
descriptor.Default.MSIxIndex = 0; /* TODO */
descriptor.Default.SMID = cpu_to_le16(smid);
descriptor.Default.LMID = 0;
descriptor.Default.DescriptorTypeDependent = 0;
_base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
&ioc->scsi_lookup_lock);
}
/**
* mpt2sas_base_put_smid_target_assist - send Target Assist/Status to firmware
* @ioc: per adapter object
* @smid: system request message index
* @io_index: value used to track the IO
*
* Return nothing.
*/
void
mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid,
u16 io_index)
{
Mpi2RequestDescriptorUnion_t descriptor;
u64 *request = (u64 *)&descriptor;
descriptor.SCSITarget.RequestFlags =
MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET;
descriptor.SCSITarget.MSIxIndex = 0; /* TODO */
descriptor.SCSITarget.SMID = cpu_to_le16(smid);
descriptor.SCSITarget.LMID = 0;
descriptor.SCSITarget.IoIndex = cpu_to_le16(io_index);
_base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
&ioc->scsi_lookup_lock);
}
/**
* _base_display_dell_branding - Disply branding string
* @ioc: per adapter object
*
* Return nothing.
*/
static void
_base_display_dell_branding(struct MPT2SAS_ADAPTER *ioc)
{
char dell_branding[MPT2SAS_DELL_BRANDING_SIZE];
if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL)
return;
memset(dell_branding, 0, MPT2SAS_DELL_BRANDING_SIZE);
switch (ioc->pdev->subsystem_device) {
case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID:
strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING,
MPT2SAS_DELL_BRANDING_SIZE - 1);
break;
case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID:
strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING,
MPT2SAS_DELL_BRANDING_SIZE - 1);
break;
case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID:
strncpy(dell_branding,
MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING,
MPT2SAS_DELL_BRANDING_SIZE - 1);
break;
case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID:
strncpy(dell_branding,
MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING,
MPT2SAS_DELL_BRANDING_SIZE - 1);
break;
case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID:
strncpy(dell_branding,
MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING,
MPT2SAS_DELL_BRANDING_SIZE - 1);
break;
case MPT2SAS_DELL_PERC_H200_SSDID:
strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_BRANDING,
MPT2SAS_DELL_BRANDING_SIZE - 1);
break;
case MPT2SAS_DELL_6GBPS_SAS_SSDID:
strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_BRANDING,
MPT2SAS_DELL_BRANDING_SIZE - 1);
break;
default:
sprintf(dell_branding, "0x%4X", ioc->pdev->subsystem_device);
break;
}
printk(MPT2SAS_INFO_FMT "%s: Vendor(0x%04X), Device(0x%04X),"
" SSVID(0x%04X), SSDID(0x%04X)\n", ioc->name, dell_branding,
ioc->pdev->vendor, ioc->pdev->device, ioc->pdev->subsystem_vendor,
ioc->pdev->subsystem_device);
}
/**
* _base_display_ioc_capabilities - Disply IOC's capabilities.
* @ioc: per adapter object
*
* Return nothing.
*/
static void
_base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc)
{
int i = 0;
char desc[16];
u8 revision;
u32 iounit_pg1_flags;
pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision);
strncpy(desc, ioc->manu_pg0.ChipName, 16);
printk(MPT2SAS_INFO_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), "
"ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n",
ioc->name, desc,
(ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
(ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
(ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
ioc->facts.FWVersion.Word & 0x000000FF,
revision,
(ioc->bios_pg3.BiosVersion & 0xFF000000) >> 24,
(ioc->bios_pg3.BiosVersion & 0x00FF0000) >> 16,
(ioc->bios_pg3.BiosVersion & 0x0000FF00) >> 8,
ioc->bios_pg3.BiosVersion & 0x000000FF);
_base_display_dell_branding(ioc);
printk(MPT2SAS_INFO_FMT "Protocol=(", ioc->name);
if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR) {
printk("Initiator");
i++;
}
if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET) {
printk("%sTarget", i ? "," : "");
i++;
}
i = 0;
printk("), ");
printk("Capabilities=(");
if (ioc->facts.IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) {
printk("Raid");
i++;
}
if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) {
printk("%sTLR", i ? "," : "");
i++;
}
if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_MULTICAST) {
printk("%sMulticast", i ? "," : "");
i++;
}
if (ioc->facts.IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET) {
printk("%sBIDI Target", i ? "," : "");
i++;
}
if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) {
printk("%sEEDP", i ? "," : "");
i++;
}
if (ioc->facts.IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) {
printk("%sSnapshot Buffer", i ? "," : "");
i++;
}
if (ioc->facts.IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) {
printk("%sDiag Trace Buffer", i ? "," : "");
i++;
}
if (ioc->facts.IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING) {
printk("%sTask Set Full", i ? "," : "");
i++;
}
iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
if (!(iounit_pg1_flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE)) {
printk("%sNCQ", i ? "," : "");
i++;
}
printk(")\n");
}
/**
* _base_static_config_pages - static start of day config pages
* @ioc: per adapter object
*
* Return nothing.
*/
static void
_base_static_config_pages(struct MPT2SAS_ADAPTER *ioc)
{
Mpi2ConfigReply_t mpi_reply;
u32 iounit_pg1_flags;
mpt2sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0);
if (ioc->ir_firmware)
mpt2sas_config_get_manufacturing_pg10(ioc, &mpi_reply,
&ioc->manu_pg10);
mpt2sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2);
mpt2sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3);
mpt2sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8);
mpt2sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0);
mpt2sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
_base_display_ioc_capabilities(ioc);
/*
* Enable task_set_full handling in iounit_pg1 when the
* facts capabilities indicate that its supported.
*/
iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
if ((ioc->facts.IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING))
iounit_pg1_flags &=
~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
else
iounit_pg1_flags |=
MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags);
mpt2sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
}
/**
* _base_release_memory_pools - release memory
* @ioc: per adapter object
*
* Free memory allocated from _base_allocate_memory_pools.
*
* Return nothing.
*/
static void
_base_release_memory_pools(struct MPT2SAS_ADAPTER *ioc)
{
dexitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
if (ioc->request) {
pci_free_consistent(ioc->pdev, ioc->request_dma_sz,
ioc->request, ioc->request_dma);
dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "request_pool(0x%p)"
": free\n", ioc->name, ioc->request));
ioc->request = NULL;
}
if (ioc->sense) {
pci_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma);
if (ioc->sense_dma_pool)
pci_pool_destroy(ioc->sense_dma_pool);
dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "sense_pool(0x%p)"
": free\n", ioc->name, ioc->sense));
ioc->sense = NULL;
}
if (ioc->reply) {
pci_pool_free(ioc->reply_dma_pool, ioc->reply, ioc->reply_dma);
if (ioc->reply_dma_pool)
pci_pool_destroy(ioc->reply_dma_pool);
dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_pool(0x%p)"
": free\n", ioc->name, ioc->reply));
ioc->reply = NULL;
}
if (ioc->reply_free) {
pci_pool_free(ioc->reply_free_dma_pool, ioc->reply_free,
ioc->reply_free_dma);
if (ioc->reply_free_dma_pool)
pci_pool_destroy(ioc->reply_free_dma_pool);
dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free_pool"
"(0x%p): free\n", ioc->name, ioc->reply_free));
ioc->reply_free = NULL;
}
if (ioc->reply_post_free) {
pci_pool_free(ioc->reply_post_free_dma_pool,
ioc->reply_post_free, ioc->reply_post_free_dma);
if (ioc->reply_post_free_dma_pool)
pci_pool_destroy(ioc->reply_post_free_dma_pool);
dexitprintk(ioc, printk(MPT2SAS_INFO_FMT
"reply_post_free_pool(0x%p): free\n", ioc->name,
ioc->reply_post_free));
ioc->reply_post_free = NULL;
}
if (ioc->config_page) {
dexitprintk(ioc, printk(MPT2SAS_INFO_FMT
"config_page(0x%p): free\n", ioc->name,
ioc->config_page));
pci_free_consistent(ioc->pdev, ioc->config_page_sz,
ioc->config_page, ioc->config_page_dma);
}
kfree(ioc->scsi_lookup);
kfree(ioc->hpr_lookup);
kfree(ioc->internal_lookup);
}
/**
* _base_allocate_memory_pools - allocate start of day memory pools
* @ioc: per adapter object
* @sleep_flag: CAN_SLEEP or NO_SLEEP
*
* Returns 0 success, anything else error
*/
static int
_base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
Mpi2IOCFactsReply_t *facts;
u32 queue_size, queue_diff;
u16 max_sge_elements;
u16 num_of_reply_frames;
u16 chains_needed_per_io;
u32 sz, total_sz;
u32 retry_sz;
u16 max_request_credit;
dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
retry_sz = 0;
facts = &ioc->facts;
/* command line tunables for max sgl entries */
if (max_sgl_entries != -1) {
ioc->shost->sg_tablesize = (max_sgl_entries <
MPT2SAS_SG_DEPTH) ? max_sgl_entries :
MPT2SAS_SG_DEPTH;
} else {
ioc->shost->sg_tablesize = MPT2SAS_SG_DEPTH;
}
/* command line tunables for max controller queue depth */
if (max_queue_depth != -1) {
max_request_credit = (max_queue_depth < facts->RequestCredit)
? max_queue_depth : facts->RequestCredit;
} else {
max_request_credit = (facts->RequestCredit >
MPT2SAS_MAX_REQUEST_QUEUE) ? MPT2SAS_MAX_REQUEST_QUEUE :
facts->RequestCredit;
}
ioc->hba_queue_depth = max_request_credit;
ioc->hi_priority_depth = facts->HighPriorityCredit;
ioc->internal_depth = ioc->hi_priority_depth + 5;
/* request frame size */
ioc->request_sz = facts->IOCRequestFrameSize * 4;
/* reply frame size */
ioc->reply_sz = facts->ReplyFrameSize * 4;
retry_allocation:
total_sz = 0;
/* calculate number of sg elements left over in the 1st frame */
max_sge_elements = ioc->request_sz - ((sizeof(Mpi2SCSIIORequest_t) -
sizeof(Mpi2SGEIOUnion_t)) + ioc->sge_size);
ioc->max_sges_in_main_message = max_sge_elements/ioc->sge_size;
/* now do the same for a chain buffer */
max_sge_elements = ioc->request_sz - ioc->sge_size;
ioc->max_sges_in_chain_message = max_sge_elements/ioc->sge_size;
ioc->chain_offset_value_for_main_message =
((sizeof(Mpi2SCSIIORequest_t) - sizeof(Mpi2SGEIOUnion_t)) +
(ioc->max_sges_in_chain_message * ioc->sge_size)) / 4;
/*
* MPT2SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE
*/
chains_needed_per_io = ((ioc->shost->sg_tablesize -
ioc->max_sges_in_main_message)/ioc->max_sges_in_chain_message)
+ 1;
if (chains_needed_per_io > facts->MaxChainDepth) {
chains_needed_per_io = facts->MaxChainDepth;
ioc->shost->sg_tablesize = min_t(u16,
ioc->max_sges_in_main_message + (ioc->max_sges_in_chain_message
* chains_needed_per_io), ioc->shost->sg_tablesize);
}
ioc->chains_needed_per_io = chains_needed_per_io;
/* reply free queue sizing - taking into account for events */
num_of_reply_frames = ioc->hba_queue_depth + 32;
/* number of replies frames can't be a multiple of 16 */
/* decrease number of reply frames by 1 */
if (!(num_of_reply_frames % 16))
num_of_reply_frames--;
/* calculate number of reply free queue entries
* (must be multiple of 16)
*/
/* (we know reply_free_queue_depth is not a multiple of 16) */
queue_size = num_of_reply_frames;
queue_size += 16 - (queue_size % 16);
ioc->reply_free_queue_depth = queue_size;
/* reply descriptor post queue sizing */
/* this size should be the number of request frames + number of reply
* frames
*/
queue_size = ioc->hba_queue_depth + num_of_reply_frames + 1;
/* round up to 16 byte boundary */
if (queue_size % 16)
queue_size += 16 - (queue_size % 16);
/* check against IOC maximum reply post queue depth */
if (queue_size > facts->MaxReplyDescriptorPostQueueDepth) {
queue_diff = queue_size -
facts->MaxReplyDescriptorPostQueueDepth;
/* round queue_diff up to multiple of 16 */
if (queue_diff % 16)
queue_diff += 16 - (queue_diff % 16);
/* adjust hba_queue_depth, reply_free_queue_depth,
* and queue_size
*/
ioc->hba_queue_depth -= queue_diff;
ioc->reply_free_queue_depth -= queue_diff;
queue_size -= queue_diff;
}
ioc->reply_post_queue_depth = queue_size;
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scatter gather: "
"sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), "
"chains_per_io(%d)\n", ioc->name, ioc->max_sges_in_main_message,
ioc->max_sges_in_chain_message, ioc->shost->sg_tablesize,
ioc->chains_needed_per_io));
ioc->scsiio_depth = ioc->hba_queue_depth -
ioc->hi_priority_depth - ioc->internal_depth;
/* set the scsi host can_queue depth
* with some internal commands that could be outstanding
*/
ioc->shost->can_queue = ioc->scsiio_depth - (2);
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host: "
"can_queue depth (%d)\n", ioc->name, ioc->shost->can_queue));
/* contiguous pool for request and chains, 16 byte align, one extra "
* "frame for smid=0
*/
ioc->chain_depth = ioc->chains_needed_per_io * ioc->scsiio_depth;
sz = ((ioc->scsiio_depth + 1 + ioc->chain_depth) * ioc->request_sz);
/* hi-priority queue */
sz += (ioc->hi_priority_depth * ioc->request_sz);
/* internal queue */
sz += (ioc->internal_depth * ioc->request_sz);
ioc->request_dma_sz = sz;
ioc->request = pci_alloc_consistent(ioc->pdev, sz, &ioc->request_dma);
if (!ioc->request) {
printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent "
"failed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
"total(%d kB)\n", ioc->name, ioc->hba_queue_depth,
ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
if (ioc->scsiio_depth < MPT2SAS_SAS_QUEUE_DEPTH)
goto out;
retry_sz += 64;
ioc->hba_queue_depth = max_request_credit - retry_sz;
goto retry_allocation;
}
if (retry_sz)
printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent "
"succeed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
"total(%d kb)\n", ioc->name, ioc->hba_queue_depth,
ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
/* hi-priority queue */
ioc->hi_priority = ioc->request + ((ioc->scsiio_depth + 1) *
ioc->request_sz);
ioc->hi_priority_dma = ioc->request_dma + ((ioc->scsiio_depth + 1) *
ioc->request_sz);
/* internal queue */
ioc->internal = ioc->hi_priority + (ioc->hi_priority_depth *
ioc->request_sz);
ioc->internal_dma = ioc->hi_priority_dma + (ioc->hi_priority_depth *
ioc->request_sz);
ioc->chain = ioc->internal + (ioc->internal_depth *
ioc->request_sz);
ioc->chain_dma = ioc->internal_dma + (ioc->internal_depth *
ioc->request_sz);
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool(0x%p): "
"depth(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name,
ioc->request, ioc->hba_queue_depth, ioc->request_sz,
(ioc->hba_queue_depth * ioc->request_sz)/1024));
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "chain pool(0x%p): depth"
"(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, ioc->chain,
ioc->chain_depth, ioc->request_sz, ((ioc->chain_depth *
ioc->request_sz))/1024));
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool: dma(0x%llx)\n",
ioc->name, (unsigned long long) ioc->request_dma));
total_sz += sz;
ioc->scsi_lookup = kcalloc(ioc->scsiio_depth,
sizeof(struct request_tracker), GFP_KERNEL);
if (!ioc->scsi_lookup) {
printk(MPT2SAS_ERR_FMT "scsi_lookup: kcalloc failed\n",
ioc->name);
goto out;
}
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsiio(0x%p): "
"depth(%d)\n", ioc->name, ioc->request,
ioc->scsiio_depth));
/* initialize hi-priority queue smid's */
ioc->hpr_lookup = kcalloc(ioc->hi_priority_depth,
sizeof(struct request_tracker), GFP_KERNEL);
if (!ioc->hpr_lookup) {
printk(MPT2SAS_ERR_FMT "hpr_lookup: kcalloc failed\n",
ioc->name);
goto out;
}
ioc->hi_priority_smid = ioc->scsiio_depth + 1;
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "hi_priority(0x%p): "
"depth(%d), start smid(%d)\n", ioc->name, ioc->hi_priority,
ioc->hi_priority_depth, ioc->hi_priority_smid));
/* initialize internal queue smid's */
ioc->internal_lookup = kcalloc(ioc->internal_depth,
sizeof(struct request_tracker), GFP_KERNEL);
if (!ioc->internal_lookup) {
printk(MPT2SAS_ERR_FMT "internal_lookup: kcalloc failed\n",
ioc->name);
goto out;
}
ioc->internal_smid = ioc->hi_priority_smid + ioc->hi_priority_depth;
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "internal(0x%p): "
"depth(%d), start smid(%d)\n", ioc->name, ioc->internal,
ioc->internal_depth, ioc->internal_smid));
/* sense buffers, 4 byte align */
sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE;
ioc->sense_dma_pool = pci_pool_create("sense pool", ioc->pdev, sz, 4,
0);
if (!ioc->sense_dma_pool) {
printk(MPT2SAS_ERR_FMT "sense pool: pci_pool_create failed\n",
ioc->name);
goto out;
}
ioc->sense = pci_pool_alloc(ioc->sense_dma_pool , GFP_KERNEL,
&ioc->sense_dma);
if (!ioc->sense) {
printk(MPT2SAS_ERR_FMT "sense pool: pci_pool_alloc failed\n",
ioc->name);
goto out;
}
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
"sense pool(0x%p): depth(%d), element_size(%d), pool_size"
"(%d kB)\n", ioc->name, ioc->sense, ioc->scsiio_depth,
SCSI_SENSE_BUFFERSIZE, sz/1024));
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "sense_dma(0x%llx)\n",
ioc->name, (unsigned long long)ioc->sense_dma));
total_sz += sz;
/* reply pool, 4 byte align */
sz = ioc->reply_free_queue_depth * ioc->reply_sz;
ioc->reply_dma_pool = pci_pool_create("reply pool", ioc->pdev, sz, 4,
0);
if (!ioc->reply_dma_pool) {
printk(MPT2SAS_ERR_FMT "reply pool: pci_pool_create failed\n",
ioc->name);
goto out;
}
ioc->reply = pci_pool_alloc(ioc->reply_dma_pool , GFP_KERNEL,
&ioc->reply_dma);
if (!ioc->reply) {
printk(MPT2SAS_ERR_FMT "reply pool: pci_pool_alloc failed\n",
ioc->name);
goto out;
}
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply pool(0x%p): depth"
"(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, ioc->reply,
ioc->reply_free_queue_depth, ioc->reply_sz, sz/1024));
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_dma(0x%llx)\n",
ioc->name, (unsigned long long)ioc->reply_dma));
total_sz += sz;
/* reply free queue, 16 byte align */
sz = ioc->reply_free_queue_depth * 4;
ioc->reply_free_dma_pool = pci_pool_create("reply_free pool",
ioc->pdev, sz, 16, 0);
if (!ioc->reply_free_dma_pool) {
printk(MPT2SAS_ERR_FMT "reply_free pool: pci_pool_create "
"failed\n", ioc->name);
goto out;
}
ioc->reply_free = pci_pool_alloc(ioc->reply_free_dma_pool , GFP_KERNEL,
&ioc->reply_free_dma);
if (!ioc->reply_free) {
printk(MPT2SAS_ERR_FMT "reply_free pool: pci_pool_alloc "
"failed\n", ioc->name);
goto out;
}
memset(ioc->reply_free, 0, sz);
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free pool(0x%p): "
"depth(%d), element_size(%d), pool_size(%d kB)\n", ioc->name,
ioc->reply_free, ioc->reply_free_queue_depth, 4, sz/1024));
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free_dma"
"(0x%llx)\n", ioc->name, (unsigned long long)ioc->reply_free_dma));
total_sz += sz;
/* reply post queue, 16 byte align */
sz = ioc->reply_post_queue_depth * sizeof(Mpi2DefaultReplyDescriptor_t);
ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool",
ioc->pdev, sz, 16, 0);
if (!ioc->reply_post_free_dma_pool) {
printk(MPT2SAS_ERR_FMT "reply_post_free pool: pci_pool_create "
"failed\n", ioc->name);
goto out;
}
ioc->reply_post_free = pci_pool_alloc(ioc->reply_post_free_dma_pool ,
GFP_KERNEL, &ioc->reply_post_free_dma);
if (!ioc->reply_post_free) {
printk(MPT2SAS_ERR_FMT "reply_post_free pool: pci_pool_alloc "
"failed\n", ioc->name);
goto out;
}
memset(ioc->reply_post_free, 0, sz);
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply post free pool"
"(0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n",
ioc->name, ioc->reply_post_free, ioc->reply_post_queue_depth, 8,
sz/1024));
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_post_free_dma = "
"(0x%llx)\n", ioc->name, (unsigned long long)
ioc->reply_post_free_dma));
total_sz += sz;
ioc->config_page_sz = 512;
ioc->config_page = pci_alloc_consistent(ioc->pdev,
ioc->config_page_sz, &ioc->config_page_dma);
if (!ioc->config_page) {
printk(MPT2SAS_ERR_FMT "config page: pci_pool_alloc "
"failed\n", ioc->name);
goto out;
}
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "config page(0x%p): size"
"(%d)\n", ioc->name, ioc->config_page, ioc->config_page_sz));
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "config_page_dma"
"(0x%llx)\n", ioc->name, (unsigned long long)ioc->config_page_dma));
total_sz += ioc->config_page_sz;
printk(MPT2SAS_INFO_FMT "Allocated physical memory: size(%d kB)\n",
ioc->name, total_sz/1024);
printk(MPT2SAS_INFO_FMT "Current Controller Queue Depth(%d), "
"Max Controller Queue Depth(%d)\n",
ioc->name, ioc->shost->can_queue, facts->RequestCredit);
printk(MPT2SAS_INFO_FMT "Scatter Gather Elements per IO(%d)\n",
ioc->name, ioc->shost->sg_tablesize);
return 0;
out:
_base_release_memory_pools(ioc);
return -ENOMEM;
}
/**
* mpt2sas_base_get_iocstate - Get the current state of a MPT adapter.
* @ioc: Pointer to MPT_ADAPTER structure
* @cooked: Request raw or cooked IOC state
*
* Returns all IOC Doorbell register bits if cooked==0, else just the
* Doorbell bits in MPI_IOC_STATE_MASK.
*/
u32
mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked)
{
u32 s, sc;
s = readl(&ioc->chip->Doorbell);
sc = s & MPI2_IOC_STATE_MASK;
return cooked ? sc : s;
}
/**
* _base_wait_on_iocstate - waiting on a particular ioc state
* @ioc_state: controller state { READY, OPERATIONAL, or RESET }
* @timeout: timeout in second
* @sleep_flag: CAN_SLEEP or NO_SLEEP
*
* Returns 0 for success, non-zero for failure.
*/
static int
_base_wait_on_iocstate(struct MPT2SAS_ADAPTER *ioc, u32 ioc_state, int timeout,
int sleep_flag)
{
u32 count, cntdn;
u32 current_state;
count = 0;
cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
do {
current_state = mpt2sas_base_get_iocstate(ioc, 1);
if (current_state == ioc_state)
return 0;
if (count && current_state == MPI2_IOC_STATE_FAULT)
break;
if (sleep_flag == CAN_SLEEP)
msleep(1);
else
udelay(500);
count++;
} while (--cntdn);
return current_state;
}
/**
* _base_wait_for_doorbell_int - waiting for controller interrupt(generated by
* a write to the doorbell)
* @ioc: per adapter object
* @timeout: timeout in second
* @sleep_flag: CAN_SLEEP or NO_SLEEP
*
* Returns 0 for success, non-zero for failure.
*
* Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
*/
static int
_base_wait_for_doorbell_int(struct MPT2SAS_ADAPTER *ioc, int timeout,
int sleep_flag)
{
u32 cntdn, count;
u32 int_status;
count = 0;
cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
do {
int_status = readl(&ioc->chip->HostInterruptStatus);
if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
"successfull count(%d), timeout(%d)\n", ioc->name,
__func__, count, timeout));
return 0;
}
if (sleep_flag == CAN_SLEEP)
msleep(1);
else
udelay(500);
count++;
} while (--cntdn);
printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), "
"int_status(%x)!\n", ioc->name, __func__, count, int_status);
return -EFAULT;
}
/**
* _base_wait_for_doorbell_ack - waiting for controller to read the doorbell.
* @ioc: per adapter object
* @timeout: timeout in second
* @sleep_flag: CAN_SLEEP or NO_SLEEP
*
* Returns 0 for success, non-zero for failure.
*
* Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to
* doorbell.
*/
static int
_base_wait_for_doorbell_ack(struct MPT2SAS_ADAPTER *ioc, int timeout,
int sleep_flag)
{
u32 cntdn, count;
u32 int_status;
u32 doorbell;
count = 0;
cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
do {
int_status = readl(&ioc->chip->HostInterruptStatus);
if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
"successfull count(%d), timeout(%d)\n", ioc->name,
__func__, count, timeout));
return 0;
} else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
doorbell = readl(&ioc->chip->Doorbell);
if ((doorbell & MPI2_IOC_STATE_MASK) ==
MPI2_IOC_STATE_FAULT) {
mpt2sas_base_fault_info(ioc , doorbell);
return -EFAULT;
}
} else if (int_status == 0xFFFFFFFF)
goto out;
if (sleep_flag == CAN_SLEEP)
msleep(1);
else
udelay(500);
count++;
} while (--cntdn);
out:
printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), "
"int_status(%x)!\n", ioc->name, __func__, count, int_status);
return -EFAULT;
}
/**
* _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use
* @ioc: per adapter object
* @timeout: timeout in second
* @sleep_flag: CAN_SLEEP or NO_SLEEP
*
* Returns 0 for success, non-zero for failure.
*
*/
static int
_base_wait_for_doorbell_not_used(struct MPT2SAS_ADAPTER *ioc, int timeout,
int sleep_flag)
{
u32 cntdn, count;
u32 doorbell_reg;
count = 0;
cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
do {
doorbell_reg = readl(&ioc->chip->Doorbell);
if (!(doorbell_reg & MPI2_DOORBELL_USED)) {
dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
"successfull count(%d), timeout(%d)\n", ioc->name,
__func__, count, timeout));
return 0;
}
if (sleep_flag == CAN_SLEEP)
msleep(1);
else
udelay(500);
count++;
} while (--cntdn);
printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), "
"doorbell_reg(%x)!\n", ioc->name, __func__, count, doorbell_reg);
return -EFAULT;
}
/**
* _base_send_ioc_reset - send doorbell reset
* @ioc: per adapter object
* @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
* @timeout: timeout in second
* @sleep_flag: CAN_SLEEP or NO_SLEEP
*
* Returns 0 for success, non-zero for failure.
*/
static int
_base_send_ioc_reset(struct MPT2SAS_ADAPTER *ioc, u8 reset_type, int timeout,
int sleep_flag)
{
u32 ioc_state;
int r = 0;
if (reset_type != MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET) {
printk(MPT2SAS_ERR_FMT "%s: unknown reset_type\n",
ioc->name, __func__);
return -EFAULT;
}
if (!(ioc->facts.IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY))
return -EFAULT;
printk(MPT2SAS_INFO_FMT "sending message unit reset !!\n", ioc->name);
writel(reset_type << MPI2_DOORBELL_FUNCTION_SHIFT,
&ioc->chip->Doorbell);
if ((_base_wait_for_doorbell_ack(ioc, 15, sleep_flag))) {
r = -EFAULT;
goto out;
}
ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
timeout, sleep_flag);
if (ioc_state) {
printk(MPT2SAS_ERR_FMT "%s: failed going to ready state "
" (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state);
r = -EFAULT;
goto out;
}
out:
printk(MPT2SAS_INFO_FMT "message unit reset: %s\n",
ioc->name, ((r == 0) ? "SUCCESS" : "FAILED"));
return r;
}
/**
* _base_handshake_req_reply_wait - send request thru doorbell interface
* @ioc: per adapter object
* @request_bytes: request length
* @request: pointer having request payload
* @reply_bytes: reply length
* @reply: pointer to reply payload
* @timeout: timeout in second
* @sleep_flag: CAN_SLEEP or NO_SLEEP
*
* Returns 0 for success, non-zero for failure.
*/
static int
_base_handshake_req_reply_wait(struct MPT2SAS_ADAPTER *ioc, int request_bytes,
u32 *request, int reply_bytes, u16 *reply, int timeout, int sleep_flag)
{
MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply;
int i;
u8 failed;
u16 dummy;
u32 *mfp;
/* make sure doorbell is not in use */
if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) {
printk(MPT2SAS_ERR_FMT "doorbell is in use "
" (line=%d)\n", ioc->name, __LINE__);
return -EFAULT;
}
/* clear pending doorbell interrupts from previous state changes */
if (readl(&ioc->chip->HostInterruptStatus) &
MPI2_HIS_IOC2SYS_DB_STATUS)
writel(0, &ioc->chip->HostInterruptStatus);
/* send message to ioc */
writel(((MPI2_FUNCTION_HANDSHAKE<<MPI2_DOORBELL_FUNCTION_SHIFT) |
((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)),
&ioc->chip->Doorbell);
if ((_base_wait_for_doorbell_int(ioc, 5, NO_SLEEP))) {
printk(MPT2SAS_ERR_FMT "doorbell handshake "
"int failed (line=%d)\n", ioc->name, __LINE__);
return -EFAULT;
}
writel(0, &ioc->chip->HostInterruptStatus);
if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) {
printk(MPT2SAS_ERR_FMT "doorbell handshake "
"ack failed (line=%d)\n", ioc->name, __LINE__);
return -EFAULT;
}
/* send message 32-bits at a time */
for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) {
writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell);
if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag)))
failed = 1;
}
if (failed) {
printk(MPT2SAS_ERR_FMT "doorbell handshake "
"sending request failed (line=%d)\n", ioc->name, __LINE__);
return -EFAULT;
}
/* now wait for the reply */
if ((_base_wait_for_doorbell_int(ioc, timeout, sleep_flag))) {
printk(MPT2SAS_ERR_FMT "doorbell handshake "
"int failed (line=%d)\n", ioc->name, __LINE__);
return -EFAULT;
}
/* read the first two 16-bits, it gives the total length of the reply */
reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell)
& MPI2_DOORBELL_DATA_MASK);
writel(0, &ioc->chip->HostInterruptStatus);
if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
printk(MPT2SAS_ERR_FMT "doorbell handshake "
"int failed (line=%d)\n", ioc->name, __LINE__);
return -EFAULT;
}
reply[1] = le16_to_cpu(readl(&ioc->chip->Doorbell)
& MPI2_DOORBELL_DATA_MASK);
writel(0, &ioc->chip->HostInterruptStatus);
for (i = 2; i < default_reply->MsgLength * 2; i++) {
if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
printk(MPT2SAS_ERR_FMT "doorbell "
"handshake int failed (line=%d)\n", ioc->name,
__LINE__);
return -EFAULT;
}
if (i >= reply_bytes/2) /* overflow case */
dummy = readl(&ioc->chip->Doorbell);
else
reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell)
& MPI2_DOORBELL_DATA_MASK);
writel(0, &ioc->chip->HostInterruptStatus);
}
_base_wait_for_doorbell_int(ioc, 5, sleep_flag);
if (_base_wait_for_doorbell_not_used(ioc, 5, sleep_flag) != 0) {
dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "doorbell is in use "
" (line=%d)\n", ioc->name, __LINE__));
}
writel(0, &ioc->chip->HostInterruptStatus);
if (ioc->logging_level & MPT_DEBUG_INIT) {
mfp = (u32 *)reply;
printk(KERN_DEBUG "\toffset:data\n");
for (i = 0; i < reply_bytes/4; i++)
printk(KERN_DEBUG "\t[0x%02x]:%08x\n", i*4,
le32_to_cpu(mfp[i]));
}
return 0;
}
/**
* mpt2sas_base_sas_iounit_control - send sas iounit control to FW
* @ioc: per adapter object
* @mpi_reply: the reply payload from FW
* @mpi_request: the request payload sent to FW
*
* The SAS IO Unit Control Request message allows the host to perform low-level
* operations, such as resets on the PHYs of the IO Unit, also allows the host
* to obtain the IOC assigned device handles for a device if it has other
* identifying information about the device, in addition allows the host to
* remove IOC resources associated with the device.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc,
Mpi2SasIoUnitControlReply_t *mpi_reply,
Mpi2SasIoUnitControlRequest_t *mpi_request)
{
u16 smid;
u32 ioc_state;
unsigned long timeleft;
u8 issue_reset;
int rc;
void *request;
u16 wait_state_count;
dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
mutex_lock(&ioc->base_cmds.mutex);
if (ioc->base_cmds.status != MPT2_CMD_NOT_USED) {
printk(MPT2SAS_ERR_FMT "%s: base_cmd in use\n",
ioc->name, __func__);
rc = -EAGAIN;
goto out;
}
wait_state_count = 0;
ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
if (wait_state_count++ == 10) {
printk(MPT2SAS_ERR_FMT
"%s: failed due to ioc not operational\n",
ioc->name, __func__);
rc = -EFAULT;
goto out;
}
ssleep(1);
ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
printk(MPT2SAS_INFO_FMT "%s: waiting for "
"operational state(count=%d)\n", ioc->name,
__func__, wait_state_count);
}
smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
rc = -EAGAIN;
goto out;
}
rc = 0;
ioc->base_cmds.status = MPT2_CMD_PENDING;
request = mpt2sas_base_get_msg_frame(ioc, smid);
ioc->base_cmds.smid = smid;
memcpy(request, mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t));
if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET)
ioc->ioc_link_reset_in_progress = 1;
mpt2sas_base_put_smid_default(ioc, smid);
init_completion(&ioc->base_cmds.done);
timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
msecs_to_jiffies(10000));
if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) &&
ioc->ioc_link_reset_in_progress)
ioc->ioc_link_reset_in_progress = 0;
if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
printk(MPT2SAS_ERR_FMT "%s: timeout\n",
ioc->name, __func__);
_debug_dump_mf(mpi_request,
sizeof(Mpi2SasIoUnitControlRequest_t)/4);
if (!(ioc->base_cmds.status & MPT2_CMD_RESET))
issue_reset = 1;
goto issue_host_reset;
}
if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID)
memcpy(mpi_reply, ioc->base_cmds.reply,
sizeof(Mpi2SasIoUnitControlReply_t));
else
memset(mpi_reply, 0, sizeof(Mpi2SasIoUnitControlReply_t));
ioc->base_cmds.status = MPT2_CMD_NOT_USED;
goto out;
issue_host_reset:
if (issue_reset)
mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
ioc->base_cmds.status = MPT2_CMD_NOT_USED;
rc = -EFAULT;
out:
mutex_unlock(&ioc->base_cmds.mutex);
return rc;
}
/**
* mpt2sas_base_scsi_enclosure_processor - sending request to sep device
* @ioc: per adapter object
* @mpi_reply: the reply payload from FW
* @mpi_request: the request payload sent to FW
*
* The SCSI Enclosure Processor request message causes the IOC to
* communicate with SES devices to control LED status signals.
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc,
Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request)
{
u16 smid;
u32 ioc_state;
unsigned long timeleft;
u8 issue_reset;
int rc;
void *request;
u16 wait_state_count;
dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
mutex_lock(&ioc->base_cmds.mutex);
if (ioc->base_cmds.status != MPT2_CMD_NOT_USED) {
printk(MPT2SAS_ERR_FMT "%s: base_cmd in use\n",
ioc->name, __func__);
rc = -EAGAIN;
goto out;
}
wait_state_count = 0;
ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
if (wait_state_count++ == 10) {
printk(MPT2SAS_ERR_FMT
"%s: failed due to ioc not operational\n",
ioc->name, __func__);
rc = -EFAULT;
goto out;
}
ssleep(1);
ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
printk(MPT2SAS_INFO_FMT "%s: waiting for "
"operational state(count=%d)\n", ioc->name,
__func__, wait_state_count);
}
smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
rc = -EAGAIN;
goto out;
}
rc = 0;
ioc->base_cmds.status = MPT2_CMD_PENDING;
request = mpt2sas_base_get_msg_frame(ioc, smid);
ioc->base_cmds.smid = smid;
memcpy(request, mpi_request, sizeof(Mpi2SepReply_t));
mpt2sas_base_put_smid_default(ioc, smid);
init_completion(&ioc->base_cmds.done);
timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
msecs_to_jiffies(10000));
if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
printk(MPT2SAS_ERR_FMT "%s: timeout\n",
ioc->name, __func__);
_debug_dump_mf(mpi_request,
sizeof(Mpi2SepRequest_t)/4);
if (!(ioc->base_cmds.status & MPT2_CMD_RESET))
issue_reset = 1;
goto issue_host_reset;
}
if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID)
memcpy(mpi_reply, ioc->base_cmds.reply,
sizeof(Mpi2SepReply_t));
else
memset(mpi_reply, 0, sizeof(Mpi2SepReply_t));
ioc->base_cmds.status = MPT2_CMD_NOT_USED;
goto out;
issue_host_reset:
if (issue_reset)
mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
ioc->base_cmds.status = MPT2_CMD_NOT_USED;
rc = -EFAULT;
out:
mutex_unlock(&ioc->base_cmds.mutex);
return rc;
}
/**
* _base_get_port_facts - obtain port facts reply and save in ioc
* @ioc: per adapter object
* @sleep_flag: CAN_SLEEP or NO_SLEEP
*
* Returns 0 for success, non-zero for failure.
*/
static int
_base_get_port_facts(struct MPT2SAS_ADAPTER *ioc, int port, int sleep_flag)
{
Mpi2PortFactsRequest_t mpi_request;
Mpi2PortFactsReply_t mpi_reply, *pfacts;
int mpi_reply_sz, mpi_request_sz, r;
dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
mpi_reply_sz = sizeof(Mpi2PortFactsReply_t);
mpi_request_sz = sizeof(Mpi2PortFactsRequest_t);
memset(&mpi_request, 0, mpi_request_sz);
mpi_request.Function = MPI2_FUNCTION_PORT_FACTS;
mpi_request.PortNumber = port;
r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
(u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
if (r != 0) {
printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n",
ioc->name, __func__, r);
return r;
}
pfacts = &ioc->pfacts[port];
memset(pfacts, 0, sizeof(Mpi2PortFactsReply_t));
pfacts->PortNumber = mpi_reply.PortNumber;
pfacts->VP_ID = mpi_reply.VP_ID;
pfacts->VF_ID = mpi_reply.VF_ID;
pfacts->MaxPostedCmdBuffers =
le16_to_cpu(mpi_reply.MaxPostedCmdBuffers);
return 0;
}
/**
* _base_get_ioc_facts - obtain ioc facts reply and save in ioc
* @ioc: per adapter object
* @sleep_flag: CAN_SLEEP or NO_SLEEP
*
* Returns 0 for success, non-zero for failure.
*/
static int
_base_get_ioc_facts(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
Mpi2IOCFactsRequest_t mpi_request;
Mpi2IOCFactsReply_t mpi_reply, *facts;
int mpi_reply_sz, mpi_request_sz, r;
dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t);
mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t);
memset(&mpi_request, 0, mpi_request_sz);
mpi_request.Function = MPI2_FUNCTION_IOC_FACTS;
r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
(u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
if (r != 0) {
printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n",
ioc->name, __func__, r);
return r;
}
facts = &ioc->facts;
memset(facts, 0, sizeof(Mpi2IOCFactsReply_t));
facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion);
facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion);
facts->VP_ID = mpi_reply.VP_ID;
facts->VF_ID = mpi_reply.VF_ID;
facts->IOCExceptions = le16_to_cpu(mpi_reply.IOCExceptions);
facts->MaxChainDepth = mpi_reply.MaxChainDepth;
facts->WhoInit = mpi_reply.WhoInit;
facts->NumberOfPorts = mpi_reply.NumberOfPorts;
facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit);
facts->MaxReplyDescriptorPostQueueDepth =
le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth);
facts->ProductID = le16_to_cpu(mpi_reply.ProductID);
facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities);
if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID))
ioc->ir_firmware = 1;
facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word);
facts->IOCRequestFrameSize =
le16_to_cpu(mpi_reply.IOCRequestFrameSize);
facts->MaxInitiators = le16_to_cpu(mpi_reply.MaxInitiators);
facts->MaxTargets = le16_to_cpu(mpi_reply.MaxTargets);
ioc->shost->max_id = -1;
facts->MaxSasExpanders = le16_to_cpu(mpi_reply.MaxSasExpanders);
facts->MaxEnclosures = le16_to_cpu(mpi_reply.MaxEnclosures);
facts->ProtocolFlags = le16_to_cpu(mpi_reply.ProtocolFlags);
facts->HighPriorityCredit =
le16_to_cpu(mpi_reply.HighPriorityCredit);
facts->ReplyFrameSize = mpi_reply.ReplyFrameSize;
facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle);
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "hba queue depth(%d), "
"max chains per io(%d)\n", ioc->name, facts->RequestCredit,
facts->MaxChainDepth));
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request frame size(%d), "
"reply frame size(%d)\n", ioc->name,
facts->IOCRequestFrameSize * 4, facts->ReplyFrameSize * 4));
return 0;
}
/**
* _base_send_ioc_init - send ioc_init to firmware
* @ioc: per adapter object
* @sleep_flag: CAN_SLEEP or NO_SLEEP
*
* Returns 0 for success, non-zero for failure.
*/
static int
_base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
Mpi2IOCInitRequest_t mpi_request;
Mpi2IOCInitReply_t mpi_reply;
int r;
dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t));
mpi_request.Function = MPI2_FUNCTION_IOC_INIT;
mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER;
mpi_request.VF_ID = 0; /* TODO */
mpi_request.VP_ID = 0;
mpi_request.MsgVersion = cpu_to_le16(MPI2_VERSION);
mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);
/* In MPI Revision I (0xA), the SystemReplyFrameSize(offset 0x18) was
* removed and made reserved. For those with older firmware will need
* this fix. It was decided that the Reply and Request frame sizes are
* the same.
*/
if ((ioc->facts.HeaderVersion >> 8) < 0xA) {
mpi_request.Reserved7 = cpu_to_le16(ioc->reply_sz);
/* mpi_request.SystemReplyFrameSize =
* cpu_to_le16(ioc->reply_sz);
*/
}
mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4);
mpi_request.ReplyDescriptorPostQueueDepth =
cpu_to_le16(ioc->reply_post_queue_depth);
mpi_request.ReplyFreeQueueDepth =
cpu_to_le16(ioc->reply_free_queue_depth);
#if BITS_PER_LONG > 32
mpi_request.SenseBufferAddressHigh =
cpu_to_le32(ioc->sense_dma >> 32);
mpi_request.SystemReplyAddressHigh =
cpu_to_le32(ioc->reply_dma >> 32);
mpi_request.SystemRequestFrameBaseAddress =
cpu_to_le64(ioc->request_dma);
mpi_request.ReplyFreeQueueAddress =
cpu_to_le64(ioc->reply_free_dma);
mpi_request.ReplyDescriptorPostQueueAddress =
cpu_to_le64(ioc->reply_post_free_dma);
#else
mpi_request.SystemRequestFrameBaseAddress =
cpu_to_le32(ioc->request_dma);
mpi_request.ReplyFreeQueueAddress =
cpu_to_le32(ioc->reply_free_dma);
mpi_request.ReplyDescriptorPostQueueAddress =
cpu_to_le32(ioc->reply_post_free_dma);
#endif
if (ioc->logging_level & MPT_DEBUG_INIT) {
u32 *mfp;
int i;
mfp = (u32 *)&mpi_request;
printk(KERN_DEBUG "\toffset:data\n");
for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++)
printk(KERN_DEBUG "\t[0x%02x]:%08x\n", i*4,
le32_to_cpu(mfp[i]));
}
r = _base_handshake_req_reply_wait(ioc,
sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request,
sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10,
sleep_flag);
if (r != 0) {
printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n",
ioc->name, __func__, r);
return r;
}
if (mpi_reply.IOCStatus != MPI2_IOCSTATUS_SUCCESS ||
mpi_reply.IOCLogInfo) {
printk(MPT2SAS_ERR_FMT "%s: failed\n", ioc->name, __func__);
r = -EIO;
}
return 0;
}
/**
* _base_send_port_enable - send port_enable(discovery stuff) to firmware
* @ioc: per adapter object
* @sleep_flag: CAN_SLEEP or NO_SLEEP
*
* Returns 0 for success, non-zero for failure.
*/
static int
_base_send_port_enable(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
Mpi2PortEnableRequest_t *mpi_request;
u32 ioc_state;
unsigned long timeleft;
int r = 0;
u16 smid;
printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name);
if (ioc->base_cmds.status & MPT2_CMD_PENDING) {
printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
ioc->name, __func__);
return -EAGAIN;
}
smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
return -EAGAIN;
}
ioc->base_cmds.status = MPT2_CMD_PENDING;
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
ioc->base_cmds.smid = smid;
memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
mpi_request->VF_ID = 0; /* TODO */
mpi_request->VP_ID = 0;
mpt2sas_base_put_smid_default(ioc, smid);
init_completion(&ioc->base_cmds.done);
timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
300*HZ);
if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
printk(MPT2SAS_ERR_FMT "%s: timeout\n",
ioc->name, __func__);
_debug_dump_mf(mpi_request,
sizeof(Mpi2PortEnableRequest_t)/4);
if (ioc->base_cmds.status & MPT2_CMD_RESET)
r = -EFAULT;
else
r = -ETIME;
goto out;
} else
dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: complete\n",
ioc->name, __func__));
ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_OPERATIONAL,
60, sleep_flag);
if (ioc_state) {
printk(MPT2SAS_ERR_FMT "%s: failed going to operational state "
" (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state);
r = -EFAULT;
}
out:
ioc->base_cmds.status = MPT2_CMD_NOT_USED;
printk(MPT2SAS_INFO_FMT "port enable: %s\n",
ioc->name, ((r == 0) ? "SUCCESS" : "FAILED"));
return r;
}
/**
* _base_unmask_events - turn on notification for this event
* @ioc: per adapter object
* @event: firmware event
*
* The mask is stored in ioc->event_masks.
*/
static void
_base_unmask_events(struct MPT2SAS_ADAPTER *ioc, u16 event)
{
u32 desired_event;
if (event >= 128)
return;
desired_event = (1 << (event % 32));
if (event < 32)
ioc->event_masks[0] &= ~desired_event;
else if (event < 64)
ioc->event_masks[1] &= ~desired_event;
else if (event < 96)
ioc->event_masks[2] &= ~desired_event;
else if (event < 128)
ioc->event_masks[3] &= ~desired_event;
}
/**
* _base_event_notification - send event notification
* @ioc: per adapter object
* @sleep_flag: CAN_SLEEP or NO_SLEEP
*
* Returns 0 for success, non-zero for failure.
*/
static int
_base_event_notification(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
Mpi2EventNotificationRequest_t *mpi_request;
unsigned long timeleft;
u16 smid;
int r = 0;
int i;
dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
if (ioc->base_cmds.status & MPT2_CMD_PENDING) {
printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
ioc->name, __func__);
return -EAGAIN;
}
smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
return -EAGAIN;
}
ioc->base_cmds.status = MPT2_CMD_PENDING;
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
ioc->base_cmds.smid = smid;
memset(mpi_request, 0, sizeof(Mpi2EventNotificationRequest_t));
mpi_request->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
mpi_request->VF_ID = 0; /* TODO */
mpi_request->VP_ID = 0;
for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
mpi_request->EventMasks[i] =
le32_to_cpu(ioc->event_masks[i]);
mpt2sas_base_put_smid_default(ioc, smid);
init_completion(&ioc->base_cmds.done);
timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ);
if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
printk(MPT2SAS_ERR_FMT "%s: timeout\n",
ioc->name, __func__);
_debug_dump_mf(mpi_request,
sizeof(Mpi2EventNotificationRequest_t)/4);
if (ioc->base_cmds.status & MPT2_CMD_RESET)
r = -EFAULT;
else
r = -ETIME;
} else
dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: complete\n",
ioc->name, __func__));
ioc->base_cmds.status = MPT2_CMD_NOT_USED;
return r;
}
/**
* mpt2sas_base_validate_event_type - validating event types
* @ioc: per adapter object
* @event: firmware event
*
* This will turn on firmware event notification when application
* ask for that event. We don't mask events that are already enabled.
*/
void
mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type)
{
int i, j;
u32 event_mask, desired_event;
u8 send_update_to_fw;
for (i = 0, send_update_to_fw = 0; i <
MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) {
event_mask = ~event_type[i];
desired_event = 1;
for (j = 0; j < 32; j++) {
if (!(event_mask & desired_event) &&
(ioc->event_masks[i] & desired_event)) {
ioc->event_masks[i] &= ~desired_event;
send_update_to_fw = 1;
}
desired_event = (desired_event << 1);
}
}
if (!send_update_to_fw)
return;
mutex_lock(&ioc->base_cmds.mutex);
_base_event_notification(ioc, CAN_SLEEP);
mutex_unlock(&ioc->base_cmds.mutex);
}
/**
* _base_diag_reset - the "big hammer" start of day reset
* @ioc: per adapter object
* @sleep_flag: CAN_SLEEP or NO_SLEEP
*
* Returns 0 for success, non-zero for failure.
*/
static int
_base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
u32 host_diagnostic;
u32 ioc_state;
u32 count;
u32 hcb_size;
printk(MPT2SAS_INFO_FMT "sending diag reset !!\n", ioc->name);
_base_save_msix_table(ioc);
drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "clear interrupts\n",
ioc->name));
count = 0;
do {
/* Write magic sequence to WriteSequence register
* Loop until in diagnostic mode
*/
drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "write magic "
"sequence\n", ioc->name));
writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
writel(MPI2_WRSEQ_1ST_KEY_VALUE, &ioc->chip->WriteSequence);
writel(MPI2_WRSEQ_2ND_KEY_VALUE, &ioc->chip->WriteSequence);
writel(MPI2_WRSEQ_3RD_KEY_VALUE, &ioc->chip->WriteSequence);
writel(MPI2_WRSEQ_4TH_KEY_VALUE, &ioc->chip->WriteSequence);
writel(MPI2_WRSEQ_5TH_KEY_VALUE, &ioc->chip->WriteSequence);
writel(MPI2_WRSEQ_6TH_KEY_VALUE, &ioc->chip->WriteSequence);
/* wait 100 msec */
if (sleep_flag == CAN_SLEEP)
msleep(100);
else
mdelay(100);
if (count++ > 20)
goto out;
host_diagnostic = readl(&ioc->chip->HostDiagnostic);
drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "wrote magic "
"sequence: count(%d), host_diagnostic(0x%08x)\n",
ioc->name, count, host_diagnostic));
} while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0);
hcb_size = readl(&ioc->chip->HCBSize);
drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "diag reset: issued\n",
ioc->name));
writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER,
&ioc->chip->HostDiagnostic);
/* don't access any registers for 50 milliseconds */
msleep(50);
/* 300 second max wait */
for (count = 0; count < 3000000 ; count++) {
host_diagnostic = readl(&ioc->chip->HostDiagnostic);
if (host_diagnostic == 0xFFFFFFFF)
goto out;
if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER))
break;
/* wait 100 msec */
if (sleep_flag == CAN_SLEEP)
msleep(1);
else
mdelay(1);
}
if (host_diagnostic & MPI2_DIAG_HCB_MODE) {
drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "restart the adapter "
"assuming the HCB Address points to good F/W\n",
ioc->name));
host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK;
host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW;
writel(host_diagnostic, &ioc->chip->HostDiagnostic);
drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT
"re-enable the HCDW\n", ioc->name));
writel(hcb_size | MPI2_HCB_SIZE_HCB_ENABLE,
&ioc->chip->HCBSize);
}
drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "restart the adapter\n",
ioc->name));
writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET,
&ioc->chip->HostDiagnostic);
drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "disable writes to the "
"diagnostic register\n", ioc->name));
writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "Wait for FW to go to the "
"READY state\n", ioc->name));
ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20,
sleep_flag);
if (ioc_state) {
printk(MPT2SAS_ERR_FMT "%s: failed going to ready state "
" (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state);
goto out;
}
_base_restore_msix_table(ioc);
printk(MPT2SAS_INFO_FMT "diag reset: SUCCESS\n", ioc->name);
return 0;
out:
printk(MPT2SAS_ERR_FMT "diag reset: FAILED\n", ioc->name);
return -EFAULT;
}
/**
* _base_make_ioc_ready - put controller in READY state
* @ioc: per adapter object
* @sleep_flag: CAN_SLEEP or NO_SLEEP
* @type: FORCE_BIG_HAMMER or SOFT_RESET
*
* Returns 0 for success, non-zero for failure.
*/
static int
_base_make_ioc_ready(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
enum reset_type type)
{
u32 ioc_state;
dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
ioc_state = mpt2sas_base_get_iocstate(ioc, 0);
dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: ioc_state(0x%08x)\n",
ioc->name, __func__, ioc_state));
if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY)
return 0;
if (ioc_state & MPI2_DOORBELL_USED) {
dhsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "unexpected doorbell "
"active!\n", ioc->name));
goto issue_diag_reset;
}
if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
mpt2sas_base_fault_info(ioc, ioc_state &
MPI2_DOORBELL_DATA_MASK);
goto issue_diag_reset;
}
if (type == FORCE_BIG_HAMMER)
goto issue_diag_reset;
if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
if (!(_base_send_ioc_reset(ioc,
MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15, CAN_SLEEP)))
return 0;
issue_diag_reset:
return _base_diag_reset(ioc, CAN_SLEEP);
}
/**
* _base_make_ioc_operational - put controller in OPERATIONAL state
* @ioc: per adapter object
* @sleep_flag: CAN_SLEEP or NO_SLEEP
*
* Returns 0 for success, non-zero for failure.
*/
static int
_base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
int r, i;
unsigned long flags;
u32 reply_address;
u16 smid;
struct _tr_list *delayed_tr, *delayed_tr_next;
dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
/* clean the delayed target reset list */
list_for_each_entry_safe(delayed_tr, delayed_tr_next,
&ioc->delayed_tr_list, list) {
list_del(&delayed_tr->list);
kfree(delayed_tr);
}
/* initialize the scsi lookup free list */
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
INIT_LIST_HEAD(&ioc->free_list);
smid = 1;
for (i = 0; i < ioc->scsiio_depth; i++, smid++) {
ioc->scsi_lookup[i].cb_idx = 0xFF;
ioc->scsi_lookup[i].smid = smid;
ioc->scsi_lookup[i].scmd = NULL;
list_add_tail(&ioc->scsi_lookup[i].tracker_list,
&ioc->free_list);
}
/* hi-priority queue */
INIT_LIST_HEAD(&ioc->hpr_free_list);
smid = ioc->hi_priority_smid;
for (i = 0; i < ioc->hi_priority_depth; i++, smid++) {
ioc->hpr_lookup[i].cb_idx = 0xFF;
ioc->hpr_lookup[i].smid = smid;
list_add_tail(&ioc->hpr_lookup[i].tracker_list,
&ioc->hpr_free_list);
}
/* internal queue */
INIT_LIST_HEAD(&ioc->internal_free_list);
smid = ioc->internal_smid;
for (i = 0; i < ioc->internal_depth; i++, smid++) {
ioc->internal_lookup[i].cb_idx = 0xFF;
ioc->internal_lookup[i].smid = smid;
list_add_tail(&ioc->internal_lookup[i].tracker_list,
&ioc->internal_free_list);
}
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
/* initialize Reply Free Queue */
for (i = 0, reply_address = (u32)ioc->reply_dma ;
i < ioc->reply_free_queue_depth ; i++, reply_address +=
ioc->reply_sz)
ioc->reply_free[i] = cpu_to_le32(reply_address);
/* initialize Reply Post Free Queue */
for (i = 0; i < ioc->reply_post_queue_depth; i++)
ioc->reply_post_free[i].Words = ULLONG_MAX;
r = _base_send_ioc_init(ioc, sleep_flag);
if (r)
return r;
/* initialize the index's */
ioc->reply_free_host_index = ioc->reply_free_queue_depth - 1;
ioc->reply_post_host_index = 0;
writel(ioc->reply_free_host_index, &ioc->chip->ReplyFreeHostIndex);
writel(0, &ioc->chip->ReplyPostHostIndex);
_base_unmask_interrupts(ioc);
r = _base_event_notification(ioc, sleep_flag);
if (r)
return r;
if (sleep_flag == CAN_SLEEP)
_base_static_config_pages(ioc);
r = _base_send_port_enable(ioc, sleep_flag);
if (r)
return r;
return r;
}
/**
* mpt2sas_base_free_resources - free resources controller resources (io/irq/memap)
* @ioc: per adapter object
*
* Return nothing.
*/
void
mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc)
{
struct pci_dev *pdev = ioc->pdev;
dexitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
_base_mask_interrupts(ioc);
_base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
if (ioc->pci_irq) {
synchronize_irq(pdev->irq);
free_irq(ioc->pci_irq, ioc);
}
_base_disable_msix(ioc);
if (ioc->chip_phys)
iounmap(ioc->chip);
ioc->pci_irq = -1;
ioc->chip_phys = 0;
pci_release_selected_regions(ioc->pdev, ioc->bars);
pci_disable_device(pdev);
return;
}
/**
* mpt2sas_base_attach - attach controller instance
* @ioc: per adapter object
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
{
int r, i;
dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
r = mpt2sas_base_map_resources(ioc);
if (r)
return r;
pci_set_drvdata(ioc->pdev, ioc->shost);
r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
if (r)
goto out_free_resources;
r = _base_get_ioc_facts(ioc, CAN_SLEEP);
if (r)
goto out_free_resources;
ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts,
sizeof(Mpi2PortFactsReply_t), GFP_KERNEL);
if (!ioc->pfacts)
goto out_free_resources;
for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) {
r = _base_get_port_facts(ioc, i, CAN_SLEEP);
if (r)
goto out_free_resources;
}
r = _base_allocate_memory_pools(ioc, CAN_SLEEP);
if (r)
goto out_free_resources;
init_waitqueue_head(&ioc->reset_wq);
/* base internal command bits */
mutex_init(&ioc->base_cmds.mutex);
ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
ioc->base_cmds.status = MPT2_CMD_NOT_USED;
/* transport internal command bits */
ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
mutex_init(&ioc->transport_cmds.mutex);
/* task management internal command bits */
ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
mutex_init(&ioc->tm_cmds.mutex);
/* config page internal command bits */
ioc->config_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
ioc->config_cmds.status = MPT2_CMD_NOT_USED;
mutex_init(&ioc->config_cmds.mutex);
/* ctl module internal command bits */
ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
mutex_init(&ioc->ctl_cmds.mutex);
for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
ioc->event_masks[i] = -1;
/* here we enable the events we care about */
_base_unmask_events(ioc, MPI2_EVENT_SAS_DISCOVERY);
_base_unmask_events(ioc, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE);
_base_unmask_events(ioc, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST);
_base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
_base_unmask_events(ioc, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE);
_base_unmask_events(ioc, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST);
_base_unmask_events(ioc, MPI2_EVENT_IR_VOLUME);
_base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK);
_base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
_base_unmask_events(ioc, MPI2_EVENT_TASK_SET_FULL);
_base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
r = _base_make_ioc_operational(ioc, CAN_SLEEP);
if (r)
goto out_free_resources;
mpt2sas_base_start_watchdog(ioc);
return 0;
out_free_resources:
ioc->remove_host = 1;
mpt2sas_base_free_resources(ioc);
_base_release_memory_pools(ioc);
pci_set_drvdata(ioc->pdev, NULL);
kfree(ioc->tm_cmds.reply);
kfree(ioc->transport_cmds.reply);
kfree(ioc->config_cmds.reply);
kfree(ioc->base_cmds.reply);
kfree(ioc->ctl_cmds.reply);
kfree(ioc->pfacts);
ioc->ctl_cmds.reply = NULL;
ioc->base_cmds.reply = NULL;
ioc->tm_cmds.reply = NULL;
ioc->transport_cmds.reply = NULL;
ioc->config_cmds.reply = NULL;
ioc->pfacts = NULL;
return r;
}
/**
* mpt2sas_base_detach - remove controller instance
* @ioc: per adapter object
*
* Return nothing.
*/
void
mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc)
{
dexitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
mpt2sas_base_stop_watchdog(ioc);
mpt2sas_base_free_resources(ioc);
_base_release_memory_pools(ioc);
pci_set_drvdata(ioc->pdev, NULL);
kfree(ioc->pfacts);
kfree(ioc->ctl_cmds.reply);
kfree(ioc->base_cmds.reply);
kfree(ioc->tm_cmds.reply);
kfree(ioc->transport_cmds.reply);
kfree(ioc->config_cmds.reply);
}
/**
* _base_reset_handler - reset callback handler (for base)
* @ioc: per adapter object
* @reset_phase: phase
*
* The handler for doing any required cleanup or initialization.
*
* The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
* MPT2_IOC_DONE_RESET
*
* Return nothing.
*/
static void
_base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
{
switch (reset_phase) {
case MPT2_IOC_PRE_RESET:
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
"MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
break;
case MPT2_IOC_AFTER_RESET:
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
"MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
if (ioc->transport_cmds.status & MPT2_CMD_PENDING) {
ioc->transport_cmds.status |= MPT2_CMD_RESET;
mpt2sas_base_free_smid(ioc, ioc->transport_cmds.smid);
complete(&ioc->transport_cmds.done);
}
if (ioc->base_cmds.status & MPT2_CMD_PENDING) {
ioc->base_cmds.status |= MPT2_CMD_RESET;
mpt2sas_base_free_smid(ioc, ioc->base_cmds.smid);
complete(&ioc->base_cmds.done);
}
if (ioc->config_cmds.status & MPT2_CMD_PENDING) {
ioc->config_cmds.status |= MPT2_CMD_RESET;
mpt2sas_base_free_smid(ioc, ioc->config_cmds.smid);
ioc->config_cmds.smid = USHORT_MAX;
complete(&ioc->config_cmds.done);
}
break;
case MPT2_IOC_DONE_RESET:
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
"MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
break;
}
mpt2sas_scsih_reset_handler(ioc, reset_phase);
mpt2sas_ctl_reset_handler(ioc, reset_phase);
}
/**
* _wait_for_commands_to_complete - reset controller
* @ioc: Pointer to MPT_ADAPTER structure
* @sleep_flag: CAN_SLEEP or NO_SLEEP
*
* This function waiting(3s) for all pending commands to complete
* prior to putting controller in reset.
*/
static void
_wait_for_commands_to_complete(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
u32 ioc_state;
unsigned long flags;
u16 i;
ioc->pending_io_count = 0;
if (sleep_flag != CAN_SLEEP)
return;
ioc_state = mpt2sas_base_get_iocstate(ioc, 0);
if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL)
return;
/* pending command count */
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
for (i = 0; i < ioc->scsiio_depth; i++)
if (ioc->scsi_lookup[i].cb_idx != 0xFF)
ioc->pending_io_count++;
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
if (!ioc->pending_io_count)
return;
/* wait for pending commands to complete */
wait_event_timeout(ioc->reset_wq, ioc->pending_io_count == 0, 3 * HZ);
}
/**
* mpt2sas_base_hard_reset_handler - reset controller
* @ioc: Pointer to MPT_ADAPTER structure
* @sleep_flag: CAN_SLEEP or NO_SLEEP
* @type: FORCE_BIG_HAMMER or SOFT_RESET
*
* Returns 0 for success, non-zero for failure.
*/
int
mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
enum reset_type type)
{
int r;
unsigned long flags;
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
__func__));
spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
if (ioc->shost_recovery) {
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
printk(MPT2SAS_ERR_FMT "%s: busy\n",
ioc->name, __func__);
return -EBUSY;
}
ioc->shost_recovery = 1;
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
_base_reset_handler(ioc, MPT2_IOC_PRE_RESET);
_wait_for_commands_to_complete(ioc, sleep_flag);
_base_mask_interrupts(ioc);
r = _base_make_ioc_ready(ioc, sleep_flag, type);
if (r)
goto out;
_base_reset_handler(ioc, MPT2_IOC_AFTER_RESET);
r = _base_make_ioc_operational(ioc, sleep_flag);
if (!r)
_base_reset_handler(ioc, MPT2_IOC_DONE_RESET);
out:
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: %s\n",
ioc->name, __func__, ((r == 0) ? "SUCCESS" : "FAILED")));
spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
ioc->shost_recovery = 0;
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
if (!r)
_base_reset_handler(ioc, MPT2_IOC_RUNNING);
return r;
}
Reference in New Issue View Git Blame Copy Permalink