mirror of
https://github.com/torvalds/linux.git
synced 2024-12-30 14:52:05 +00:00
3f44193780
Add bindings documentation for i.MX7 media drivers. The imx7 MIPI CSI2 and imx7 CMOS Sensor Interface. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
91 lines
3.4 KiB
Plaintext
91 lines
3.4 KiB
Plaintext
Freescale i.MX7 Mipi CSI2
|
|
=========================
|
|
|
|
mipi_csi2 node
|
|
--------------
|
|
|
|
This is the device node for the MIPI CSI-2 receiver core in i.MX7 SoC. It is
|
|
compatible with previous version of Samsung D-phy.
|
|
|
|
Required properties:
|
|
|
|
- compatible : "fsl,imx7-mipi-csi2";
|
|
- reg : base address and length of the register set for the device;
|
|
- interrupts : should contain MIPI CSIS interrupt;
|
|
- clocks : list of clock specifiers, see
|
|
Documentation/devicetree/bindings/clock/clock-bindings.txt for details;
|
|
- clock-names : must contain "pclk", "wrap" and "phy" entries, matching
|
|
entries in the clock property;
|
|
- power-domains : a phandle to the power domain, see
|
|
Documentation/devicetree/bindings/power/power_domain.txt for details.
|
|
- reset-names : should include following entry "mrst";
|
|
- resets : a list of phandle, should contain reset entry of
|
|
reset-names;
|
|
- phy-supply : from the generic phy bindings, a phandle to a regulator that
|
|
provides power to MIPI CSIS core;
|
|
|
|
Optional properties:
|
|
|
|
- clock-frequency : The IP's main (system bus) clock frequency in Hz, default
|
|
value when this property is not specified is 166 MHz;
|
|
- fsl,csis-hs-settle : differential receiver (HS-RX) settle time;
|
|
|
|
The device node should contain two 'port' child nodes with one child 'endpoint'
|
|
node, according to the bindings defined in:
|
|
Documentation/devicetree/bindings/ media/video-interfaces.txt.
|
|
The following are properties specific to those nodes.
|
|
|
|
port node
|
|
---------
|
|
|
|
- reg : (required) can take the values 0 or 1, where 0 shall be
|
|
related to the sink port and port 1 shall be the source
|
|
one;
|
|
|
|
endpoint node
|
|
-------------
|
|
|
|
- data-lanes : (required) an array specifying active physical MIPI-CSI2
|
|
data input lanes and their mapping to logical lanes; this
|
|
shall only be applied to port 0 (sink port), the array's
|
|
content is unused only its length is meaningful,
|
|
in this case the maximum length supported is 2;
|
|
|
|
example:
|
|
|
|
mipi_csi: mipi-csi@30750000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
compatible = "fsl,imx7-mipi-csi2";
|
|
reg = <0x30750000 0x10000>;
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clks IMX7D_IPG_ROOT_CLK>,
|
|
<&clks IMX7D_MIPI_CSI_ROOT_CLK>,
|
|
<&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
|
|
clock-names = "pclk", "wrap", "phy";
|
|
clock-frequency = <166000000>;
|
|
power-domains = <&pgc_mipi_phy>;
|
|
phy-supply = <®_1p0d>;
|
|
resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
|
|
reset-names = "mrst";
|
|
fsl,csis-hs-settle = <3>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
mipi_from_sensor: endpoint {
|
|
remote-endpoint = <&ov2680_to_mipi>;
|
|
data-lanes = <1>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
mipi_vc0_to_csi_mux: endpoint {
|
|
remote-endpoint = <&csi_mux_from_mipi_vc0>;
|
|
};
|
|
};
|
|
};
|