mirror of
https://github.com/torvalds/linux.git
synced 2024-12-29 14:21:47 +00:00
7eb24279d2
This patch adds audio clock device tree binding documentation to an existing Cygnus clock DT bindings document. Signed-off-by: Simran Rai <ssimran@broadcom.com> Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Lori Hikichi <lhikichi@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
222 lines
7.7 KiB
Plaintext
222 lines
7.7 KiB
Plaintext
Broadcom iProc Family Clocks
|
|
|
|
This binding uses the common clock binding:
|
|
Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
|
|
The iProc clock controller manages clocks that are common to the iProc family.
|
|
An SoC from the iProc family may have several PPLs, e.g., ARMPLL, GENPLL,
|
|
LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL
|
|
comprises of several leaf clocks
|
|
|
|
Required properties for a PLL and its leaf clocks:
|
|
|
|
- compatible:
|
|
Should have a value of the form "brcm,<soc>-<pll>". For example, GENPLL on
|
|
Cygnus has a compatible string of "brcm,cygnus-genpll"
|
|
|
|
- #clock-cells:
|
|
Have a value of <1> since there are more than 1 leaf clock of a given PLL
|
|
|
|
- reg:
|
|
Define the base and range of the I/O address space that contain the iProc
|
|
clock control registers required for the PLL
|
|
|
|
- clocks:
|
|
The input parent clock phandle for the PLL. For most iProc PLLs, this is an
|
|
onboard crystal with a fixed rate
|
|
|
|
- clock-output-names:
|
|
An ordered list of strings defining the names of the clocks
|
|
|
|
Example:
|
|
|
|
osc: oscillator {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <25000000>;
|
|
};
|
|
|
|
genpll: genpll {
|
|
#clock-cells = <1>;
|
|
compatible = "brcm,cygnus-genpll";
|
|
reg = <0x0301d000 0x2c>, <0x0301c020 0x4>;
|
|
clocks = <&osc>;
|
|
clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys",
|
|
"enet_sw", "audio_125", "can";
|
|
};
|
|
|
|
Required properties for ASIU clocks:
|
|
|
|
ASIU clocks are a special case. These clocks are derived directly from the
|
|
reference clock of the onboard crystal
|
|
|
|
- compatible:
|
|
Should have a value of the form "brcm,<soc>-asiu-clk". For example, ASIU
|
|
clocks for Cygnus have a compatible string of "brcm,cygnus-asiu-clk"
|
|
|
|
- #clock-cells:
|
|
Have a value of <1> since there are more than 1 ASIU clocks
|
|
|
|
- reg:
|
|
Define the base and range of the I/O address space that contain the iProc
|
|
clock control registers required for ASIU clocks
|
|
|
|
- clocks:
|
|
The input parent clock phandle for the ASIU clock, i.e., the onboard
|
|
crystal
|
|
|
|
- clock-output-names:
|
|
An ordered list of strings defining the names of the ASIU clocks
|
|
|
|
Example:
|
|
|
|
osc: oscillator {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <25000000>;
|
|
};
|
|
|
|
asiu_clks: asiu_clks {
|
|
#clock-cells = <1>;
|
|
compatible = "brcm,cygnus-asiu-clk";
|
|
reg = <0x0301d048 0xc>, <0x180aa024 0x4>;
|
|
clocks = <&osc>;
|
|
clock-output-names = "keypad", "adc/touch", "pwm";
|
|
};
|
|
|
|
Cygnus
|
|
------
|
|
PLL and leaf clock compatible strings for Cygnus are:
|
|
"brcm,cygnus-armpll"
|
|
"brcm,cygnus-genpll"
|
|
"brcm,cygnus-lcpll0"
|
|
"brcm,cygnus-mipipll"
|
|
"brcm,cygnus-asiu-clk"
|
|
"brcm,cygnus-audiopll"
|
|
|
|
The following table defines the set of PLL/clock index and ID for Cygnus.
|
|
These clock IDs are defined in:
|
|
"include/dt-bindings/clock/bcm-cygnus.h"
|
|
|
|
Clock Source (Parent) Index ID
|
|
--- ----- ----- ---------
|
|
crystal N/A N/A N/A
|
|
|
|
armpll crystal N/A N/A
|
|
|
|
keypad crystal (ASIU) 0 BCM_CYGNUS_ASIU_KEYPAD_CLK
|
|
adc/tsc crystal (ASIU) 1 BCM_CYGNUS_ASIU_ADC_CLK
|
|
pwm crystal (ASIU) 2 BCM_CYGNUS_ASIU_PWM_CLK
|
|
|
|
genpll crystal 0 BCM_CYGNUS_GENPLL
|
|
axi21 genpll 1 BCM_CYGNUS_GENPLL_AXI21_CLK
|
|
250mhz genpll 2 BCM_CYGNUS_GENPLL_250MHZ_CLK
|
|
ihost_sys genpll 3 BCM_CYGNUS_GENPLL_IHOST_SYS_CLK
|
|
enet_sw genpll 4 BCM_CYGNUS_GENPLL_ENET_SW_CLK
|
|
audio_125 genpll 5 BCM_CYGNUS_GENPLL_AUDIO_125_CLK
|
|
can genpll 6 BCM_CYGNUS_GENPLL_CAN_CLK
|
|
|
|
lcpll0 crystal 0 BCM_CYGNUS_LCPLL0
|
|
pcie_phy lcpll0 1 BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK
|
|
ddr_phy lcpll0 2 BCM_CYGNUS_LCPLL0_DDR_PHY_CLK
|
|
sdio lcpll0 3 BCM_CYGNUS_LCPLL0_SDIO_CLK
|
|
usb_phy lcpll0 4 BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK
|
|
smart_card lcpll0 5 BCM_CYGNUS_LCPLL0_SMART_CARD_CLK
|
|
ch5_unused lcpll0 6 BCM_CYGNUS_LCPLL0_CH5_UNUSED
|
|
|
|
mipipll crystal 0 BCM_CYGNUS_MIPIPLL
|
|
ch0_unused mipipll 1 BCM_CYGNUS_MIPIPLL_CH0_UNUSED
|
|
ch1_lcd mipipll 2 BCM_CYGNUS_MIPIPLL_CH1_LCD
|
|
ch2_v3d mipipll 3 BCM_CYGNUS_MIPIPLL_CH2_V3D
|
|
ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED
|
|
ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED
|
|
ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED
|
|
|
|
audiopll crystal 0 BCM_CYGNUS_AUDIOPLL
|
|
ch0_audio audiopll 1 BCM_CYGNUS_AUDIOPLL_CH0
|
|
ch1_audio audiopll 2 BCM_CYGNUS_AUDIOPLL_CH1
|
|
ch2_audio audiopll 3 BCM_CYGNUS_AUDIOPLL_CH2
|
|
|
|
Northstar and Northstar Plus
|
|
------
|
|
PLL and leaf clock compatible strings for Northstar and Northstar Plus are:
|
|
"brcm,nsp-armpll"
|
|
"brcm,nsp-genpll"
|
|
"brcm,nsp-lcpll0"
|
|
|
|
The following table defines the set of PLL/clock index and ID for Northstar and
|
|
Northstar Plus. These clock IDs are defined in:
|
|
"include/dt-bindings/clock/bcm-nsp.h"
|
|
|
|
Clock Source Index ID
|
|
--- ----- ----- ---------
|
|
crystal N/A N/A N/A
|
|
|
|
armpll crystal N/A N/A
|
|
|
|
genpll crystal 0 BCM_NSP_GENPLL
|
|
phy genpll 1 BCM_NSP_GENPLL_PHY_CLK
|
|
ethernetclk genpll 2 BCM_NSP_GENPLL_ENET_SW_CLK
|
|
usbclk genpll 3 BCM_NSP_GENPLL_USB_PHY_REF_CLK
|
|
iprocfast genpll 4 BCM_NSP_GENPLL_IPROCFAST_CLK
|
|
sata1 genpll 5 BCM_NSP_GENPLL_SATA1_CLK
|
|
sata2 genpll 6 BCM_NSP_GENPLL_SATA2_CLK
|
|
|
|
lcpll0 crystal 0 BCM_NSP_LCPLL0
|
|
pcie_phy lcpll0 1 BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK
|
|
sdio lcpll0 2 BCM_NSP_LCPLL0_SDIO_CLK
|
|
ddr_phy lcpll0 3 BCM_NSP_LCPLL0_DDR_PHY_CLK
|
|
|
|
Northstar 2
|
|
-----------
|
|
PLL and leaf clock compatible strings for Northstar 2 are:
|
|
"brcm,ns2-genpll-scr"
|
|
"brcm,ns2-genpll-sw"
|
|
"brcm,ns2-lcpll-ddr"
|
|
"brcm,ns2-lcpll-ports"
|
|
|
|
The following table defines the set of PLL/clock index and ID for Northstar 2.
|
|
These clock IDs are defined in:
|
|
"include/dt-bindings/clock/bcm-ns2.h"
|
|
|
|
Clock Source Index ID
|
|
--- ----- ----- ---------
|
|
crystal N/A N/A N/A
|
|
|
|
genpll_scr crystal 0 BCM_NS2_GENPLL_SCR
|
|
scr genpll_scr 1 BCM_NS2_GENPLL_SCR_SCR_CLK
|
|
fs genpll_scr 2 BCM_NS2_GENPLL_SCR_FS_CLK
|
|
audio_ref genpll_scr 3 BCM_NS2_GENPLL_SCR_AUDIO_CLK
|
|
ch3_unused genpll_scr 4 BCM_NS2_GENPLL_SCR_CH3_UNUSED
|
|
ch4_unused genpll_scr 5 BCM_NS2_GENPLL_SCR_CH4_UNUSED
|
|
ch5_unused genpll_scr 6 BCM_NS2_GENPLL_SCR_CH5_UNUSED
|
|
|
|
genpll_sw crystal 0 BCM_NS2_GENPLL_SW
|
|
rpe genpll_sw 1 BCM_NS2_GENPLL_SW_RPE_CLK
|
|
250 genpll_sw 2 BCM_NS2_GENPLL_SW_250_CLK
|
|
nic genpll_sw 3 BCM_NS2_GENPLL_SW_NIC_CLK
|
|
chimp genpll_sw 4 BCM_NS2_GENPLL_SW_CHIMP_CLK
|
|
port genpll_sw 5 BCM_NS2_GENPLL_SW_PORT_CLK
|
|
sdio genpll_sw 6 BCM_NS2_GENPLL_SW_SDIO_CLK
|
|
|
|
lcpll_ddr crystal 0 BCM_NS2_LCPLL_DDR
|
|
pcie_sata_usb lcpll_ddr 1 BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK
|
|
ddr lcpll_ddr 2 BCM_NS2_LCPLL_DDR_DDR_CLK
|
|
ch2_unused lcpll_ddr 3 BCM_NS2_LCPLL_DDR_CH2_UNUSED
|
|
ch3_unused lcpll_ddr 4 BCM_NS2_LCPLL_DDR_CH3_UNUSED
|
|
ch4_unused lcpll_ddr 5 BCM_NS2_LCPLL_DDR_CH4_UNUSED
|
|
ch5_unused lcpll_ddr 6 BCM_NS2_LCPLL_DDR_CH5_UNUSED
|
|
|
|
lcpll_ports crystal 0 BCM_NS2_LCPLL_PORTS
|
|
wan lcpll_ports 1 BCM_NS2_LCPLL_PORTS_WAN_CLK
|
|
rgmii lcpll_ports 2 BCM_NS2_LCPLL_PORTS_RGMII_CLK
|
|
ch2_unused lcpll_ports 3 BCM_NS2_LCPLL_PORTS_CH2_UNUSED
|
|
ch3_unused lcpll_ports 4 BCM_NS2_LCPLL_PORTS_CH3_UNUSED
|
|
ch4_unused lcpll_ports 5 BCM_NS2_LCPLL_PORTS_CH4_UNUSED
|
|
ch5_unused lcpll_ports 6 BCM_NS2_LCPLL_PORTS_CH5_UNUSED
|
|
|
|
BCM63138
|
|
--------
|
|
PLL and leaf clock compatible strings for BCM63138 are:
|
|
"brcm,bcm63138-armpll"
|