mirror of
https://github.com/torvalds/linux.git
synced 2024-11-28 15:11:31 +00:00
4aebb79021
DRM_FORMAT_RGB888 is 24 bits per pixel and it would be natural to send it on the SPI bus using a 24 bits per word transfer. The problem with this is that not all SPI controllers support 24 bpw. Since DRM_FORMAT_RGB888 is stored in memory as little endian and the SPI bus is big endian we use 8 bpw to always get the same pixel format on the bus: b8g8r8. The MIPI DCS specification lists the standard commands that can be sent over the MIPI DBI interface. The set_address_mode (36h) command has one bit in the parameter that controls RGB/BGR order. This means that the controller can be configured to receive the pixel as BGR. RGB888 is rarely supported on these controllers but RGB666 is very common. All datasheets I have seen do at least support the pixel format option where each color is sent as one byte and the 6 MSB's are used. All this put together means that we can send each pixel as b8g8r8 and an RGB666 capable controller sees this as b6x2g6x2r6x2. v4: - s/emulation_format/pixel_format/ (Dmitry) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240604-panel-mipi-dbi-rgb666-v4-4-d7c2bcb9b78d@tronnes.org Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
260 lines
7.1 KiB
C
260 lines
7.1 KiB
C
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
/*
|
|
* MIPI Display Bus Interface (DBI) LCD controller support
|
|
*
|
|
* Copyright 2016 Noralf Trønnes
|
|
*/
|
|
|
|
#ifndef __LINUX_MIPI_DBI_H
|
|
#define __LINUX_MIPI_DBI_H
|
|
|
|
#include <linux/mutex.h>
|
|
#include <drm/drm_device.h>
|
|
#include <drm/drm_simple_kms_helper.h>
|
|
|
|
struct drm_format_conv_state;
|
|
struct drm_rect;
|
|
struct gpio_desc;
|
|
struct iosys_map;
|
|
struct regulator;
|
|
struct spi_device;
|
|
|
|
/**
|
|
* struct mipi_dbi - MIPI DBI interface
|
|
*/
|
|
struct mipi_dbi {
|
|
/**
|
|
* @cmdlock: Command lock
|
|
*/
|
|
struct mutex cmdlock;
|
|
|
|
/**
|
|
* @command: Bus specific callback executing commands.
|
|
*/
|
|
int (*command)(struct mipi_dbi *dbi, u8 *cmd, u8 *param, size_t num);
|
|
|
|
/**
|
|
* @read_commands: Array of read commands terminated by a zero entry.
|
|
* Reading is disabled if this is NULL.
|
|
*/
|
|
const u8 *read_commands;
|
|
|
|
/**
|
|
* @swap_bytes: Swap bytes in buffer before transfer
|
|
*/
|
|
bool swap_bytes;
|
|
|
|
/**
|
|
* @reset: Optional reset gpio
|
|
*/
|
|
struct gpio_desc *reset;
|
|
|
|
/* Type C specific */
|
|
|
|
/**
|
|
* @spi: SPI device
|
|
*/
|
|
struct spi_device *spi;
|
|
|
|
/**
|
|
* @write_memory_bpw: Bits per word used on a MIPI_DCS_WRITE_MEMORY_START transfer
|
|
*/
|
|
unsigned int write_memory_bpw;
|
|
|
|
/**
|
|
* @dc: Optional D/C gpio.
|
|
*/
|
|
struct gpio_desc *dc;
|
|
|
|
/**
|
|
* @tx_buf9: Buffer used for Option 1 9-bit conversion
|
|
*/
|
|
void *tx_buf9;
|
|
|
|
/**
|
|
* @tx_buf9_len: Size of tx_buf9.
|
|
*/
|
|
size_t tx_buf9_len;
|
|
};
|
|
|
|
/**
|
|
* struct mipi_dbi_dev - MIPI DBI device
|
|
*/
|
|
struct mipi_dbi_dev {
|
|
/**
|
|
* @drm: DRM device
|
|
*/
|
|
struct drm_device drm;
|
|
|
|
/**
|
|
* @pipe: Display pipe structure
|
|
*/
|
|
struct drm_simple_display_pipe pipe;
|
|
|
|
/**
|
|
* @connector: Connector
|
|
*/
|
|
struct drm_connector connector;
|
|
|
|
/**
|
|
* @mode: Fixed display mode
|
|
*/
|
|
struct drm_display_mode mode;
|
|
|
|
/**
|
|
* @pixel_format: Native pixel format (DRM_FORMAT\_\*)
|
|
*/
|
|
u32 pixel_format;
|
|
|
|
/**
|
|
* @tx_buf: Buffer used for transfer (copy clip rect area)
|
|
*/
|
|
u16 *tx_buf;
|
|
|
|
/**
|
|
* @rotation: initial rotation in degrees Counter Clock Wise
|
|
*/
|
|
unsigned int rotation;
|
|
|
|
/**
|
|
* @left_offset: Horizontal offset of the display relative to the
|
|
* controller's driver array
|
|
*/
|
|
unsigned int left_offset;
|
|
|
|
/**
|
|
* @top_offset: Vertical offset of the display relative to the
|
|
* controller's driver array
|
|
*/
|
|
unsigned int top_offset;
|
|
|
|
/**
|
|
* @backlight: backlight device (optional)
|
|
*/
|
|
struct backlight_device *backlight;
|
|
|
|
/**
|
|
* @regulator: power regulator (Vdd) (optional)
|
|
*/
|
|
struct regulator *regulator;
|
|
|
|
/**
|
|
* @io_regulator: I/O power regulator (Vddi) (optional)
|
|
*/
|
|
struct regulator *io_regulator;
|
|
|
|
/**
|
|
* @dbi: MIPI DBI interface
|
|
*/
|
|
struct mipi_dbi dbi;
|
|
|
|
/**
|
|
* @driver_private: Driver private data.
|
|
* Necessary for drivers with private data since devm_drm_dev_alloc()
|
|
* can't allocate structures that embed a structure which then again
|
|
* embeds drm_device.
|
|
*/
|
|
void *driver_private;
|
|
};
|
|
|
|
static inline struct mipi_dbi_dev *drm_to_mipi_dbi_dev(struct drm_device *drm)
|
|
{
|
|
return container_of(drm, struct mipi_dbi_dev, drm);
|
|
}
|
|
|
|
int mipi_dbi_spi_init(struct spi_device *spi, struct mipi_dbi *dbi,
|
|
struct gpio_desc *dc);
|
|
int mipi_dbi_dev_init_with_formats(struct mipi_dbi_dev *dbidev,
|
|
const struct drm_simple_display_pipe_funcs *funcs,
|
|
const uint32_t *formats, unsigned int format_count,
|
|
const struct drm_display_mode *mode,
|
|
unsigned int rotation, size_t tx_buf_size);
|
|
int mipi_dbi_dev_init(struct mipi_dbi_dev *dbidev,
|
|
const struct drm_simple_display_pipe_funcs *funcs,
|
|
const struct drm_display_mode *mode, unsigned int rotation);
|
|
enum drm_mode_status mipi_dbi_pipe_mode_valid(struct drm_simple_display_pipe *pipe,
|
|
const struct drm_display_mode *mode);
|
|
void mipi_dbi_pipe_update(struct drm_simple_display_pipe *pipe,
|
|
struct drm_plane_state *old_state);
|
|
void mipi_dbi_enable_flush(struct mipi_dbi_dev *dbidev,
|
|
struct drm_crtc_state *crtc_state,
|
|
struct drm_plane_state *plan_state);
|
|
void mipi_dbi_pipe_disable(struct drm_simple_display_pipe *pipe);
|
|
int mipi_dbi_pipe_begin_fb_access(struct drm_simple_display_pipe *pipe,
|
|
struct drm_plane_state *plane_state);
|
|
void mipi_dbi_pipe_end_fb_access(struct drm_simple_display_pipe *pipe,
|
|
struct drm_plane_state *plane_state);
|
|
void mipi_dbi_pipe_reset_plane(struct drm_simple_display_pipe *pipe);
|
|
struct drm_plane_state *mipi_dbi_pipe_duplicate_plane_state(struct drm_simple_display_pipe *pipe);
|
|
void mipi_dbi_pipe_destroy_plane_state(struct drm_simple_display_pipe *pipe,
|
|
struct drm_plane_state *plane_state);
|
|
|
|
void mipi_dbi_hw_reset(struct mipi_dbi *dbi);
|
|
bool mipi_dbi_display_is_on(struct mipi_dbi *dbi);
|
|
int mipi_dbi_poweron_reset(struct mipi_dbi_dev *dbidev);
|
|
int mipi_dbi_poweron_conditional_reset(struct mipi_dbi_dev *dbidev);
|
|
|
|
u32 mipi_dbi_spi_cmd_max_speed(struct spi_device *spi, size_t len);
|
|
int mipi_dbi_spi_transfer(struct spi_device *spi, u32 speed_hz,
|
|
u8 bpw, const void *buf, size_t len);
|
|
|
|
int mipi_dbi_command_read(struct mipi_dbi *dbi, u8 cmd, u8 *val);
|
|
int mipi_dbi_command_buf(struct mipi_dbi *dbi, u8 cmd, u8 *data, size_t len);
|
|
int mipi_dbi_command_stackbuf(struct mipi_dbi *dbi, u8 cmd, const u8 *data,
|
|
size_t len);
|
|
int mipi_dbi_buf_copy(void *dst, struct iosys_map *src, struct drm_framebuffer *fb,
|
|
struct drm_rect *clip, bool swap,
|
|
struct drm_format_conv_state *fmtcnv_state);
|
|
|
|
/**
|
|
* mipi_dbi_command - MIPI DCS command with optional parameter(s)
|
|
* @dbi: MIPI DBI structure
|
|
* @cmd: Command
|
|
* @seq: Optional parameter(s)
|
|
*
|
|
* Send MIPI DCS command to the controller. Use mipi_dbi_command_read() for
|
|
* get/read.
|
|
*
|
|
* Returns:
|
|
* Zero on success, negative error code on failure.
|
|
*/
|
|
#define mipi_dbi_command(dbi, cmd, seq...) \
|
|
({ \
|
|
const u8 d[] = { seq }; \
|
|
struct device *dev = &(dbi)->spi->dev; \
|
|
int ret; \
|
|
ret = mipi_dbi_command_stackbuf(dbi, cmd, d, ARRAY_SIZE(d)); \
|
|
if (ret) \
|
|
dev_err_ratelimited(dev, "error %d when sending command %#02x\n", ret, cmd); \
|
|
ret; \
|
|
})
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
void mipi_dbi_debugfs_init(struct drm_minor *minor);
|
|
#else
|
|
static inline void mipi_dbi_debugfs_init(struct drm_minor *minor) {}
|
|
#endif
|
|
|
|
/**
|
|
* DRM_MIPI_DBI_SIMPLE_DISPLAY_PIPE_FUNCS - Initializes struct drm_simple_display_pipe_funcs
|
|
* for MIPI-DBI devices
|
|
* @enable_: Enable-callback implementation
|
|
*
|
|
* This macro initializes struct drm_simple_display_pipe_funcs with default
|
|
* values for MIPI-DBI-based devices. The only callback that depends on the
|
|
* hardware is @enable, for which the driver has to provide an implementation.
|
|
* MIPI-based drivers are encouraged to use this macro for initialization.
|
|
*/
|
|
#define DRM_MIPI_DBI_SIMPLE_DISPLAY_PIPE_FUNCS(enable_) \
|
|
.mode_valid = mipi_dbi_pipe_mode_valid, \
|
|
.enable = (enable_), \
|
|
.disable = mipi_dbi_pipe_disable, \
|
|
.update = mipi_dbi_pipe_update, \
|
|
.begin_fb_access = mipi_dbi_pipe_begin_fb_access, \
|
|
.end_fb_access = mipi_dbi_pipe_end_fb_access, \
|
|
.reset_plane = mipi_dbi_pipe_reset_plane, \
|
|
.duplicate_plane_state = mipi_dbi_pipe_duplicate_plane_state, \
|
|
.destroy_plane_state = mipi_dbi_pipe_destroy_plane_state
|
|
|
|
#endif /* __LINUX_MIPI_DBI_H */
|