mirror of
https://github.com/torvalds/linux.git
synced 2024-12-19 01:23:20 +00:00
ed692a99f3
DWC3 controller on Exynos7 SoC has separate control for AXI UpScaler which connects DWC3 DRD controller to AXI bus. Get the gate clock for the same to control it across power cycles. Suggested-by: Anton Tikhomirov <av.tikhomirov@samsung.com> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
118 lines
3.4 KiB
Plaintext
118 lines
3.4 KiB
Plaintext
Samsung Exynos SoC USB controller
|
|
|
|
The USB devices interface with USB controllers on Exynos SOCs.
|
|
The device node has following properties.
|
|
|
|
EHCI
|
|
Required properties:
|
|
- compatible: should be "samsung,exynos4210-ehci" for USB 2.0
|
|
EHCI controller in host mode.
|
|
- reg: physical base address of the controller and length of memory mapped
|
|
region.
|
|
- interrupts: interrupt number to the cpu.
|
|
- clocks: from common clock binding: handle to usb clock.
|
|
- clock-names: from common clock binding: Shall be "usbhost".
|
|
- port: if in the SoC there are EHCI phys, they should be listed here.
|
|
One phy per port. Each port should have following entries:
|
|
- reg: port number on EHCI controller, e.g
|
|
On Exynos5250, port 0 is USB2.0 otg phy
|
|
port 1 is HSIC phy0
|
|
port 2 is HSIC phy1
|
|
- phys: from the *Generic PHY* bindings; specifying phy used by port.
|
|
|
|
Optional properties:
|
|
- samsung,vbus-gpio: if present, specifies the GPIO that
|
|
needs to be pulled up for the bus to be powered.
|
|
|
|
Example:
|
|
|
|
usb@12110000 {
|
|
compatible = "samsung,exynos4210-ehci";
|
|
reg = <0x12110000 0x100>;
|
|
interrupts = <0 71 0>;
|
|
samsung,vbus-gpio = <&gpx2 6 1 3 3>;
|
|
|
|
clocks = <&clock 285>;
|
|
clock-names = "usbhost";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
phys = <&usb2phy 1>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
OHCI
|
|
Required properties:
|
|
- compatible: should be "samsung,exynos4210-ohci" for USB 2.0
|
|
OHCI companion controller in host mode.
|
|
- reg: physical base address of the controller and length of memory mapped
|
|
region.
|
|
- interrupts: interrupt number to the cpu.
|
|
- clocks: from common clock binding: handle to usb clock.
|
|
- clock-names: from common clock binding: Shall be "usbhost".
|
|
- port: if in the SoC there are OHCI phys, they should be listed here.
|
|
One phy per port. Each port should have following entries:
|
|
- reg: port number on OHCI controller, e.g
|
|
On Exynos5250, port 0 is USB2.0 otg phy
|
|
port 1 is HSIC phy0
|
|
port 2 is HSIC phy1
|
|
- phys: from the *Generic PHY* bindings, specifying phy used by port.
|
|
|
|
Example:
|
|
usb@12120000 {
|
|
compatible = "samsung,exynos4210-ohci";
|
|
reg = <0x12120000 0x100>;
|
|
interrupts = <0 71 0>;
|
|
|
|
clocks = <&clock 285>;
|
|
clock-names = "usbhost";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
port@0 {
|
|
reg = <0>;
|
|
phys = <&usb2phy 1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
};
|
|
|
|
DWC3
|
|
Required properties:
|
|
- compatible: should be one of the following -
|
|
"samsung,exynos5250-dwusb3": for USB 3.0 DWC3 controller on
|
|
Exynos5250/5420.
|
|
"samsung,exynos7-dwusb3": for USB 3.0 DWC3 controller on Exynos7.
|
|
- #address-cells, #size-cells : should be '1' if the device has sub-nodes
|
|
with 'reg' property.
|
|
- ranges: allows valid 1:1 translation between child's address space and
|
|
parent's address space
|
|
- clocks: Clock IDs array as required by the controller.
|
|
- clock-names: names of clocks correseponding to IDs in the clock property
|
|
|
|
Sub-nodes:
|
|
The dwc3 core should be added as subnode to Exynos dwc3 glue.
|
|
- dwc3 :
|
|
The binding details of dwc3 can be found in:
|
|
Documentation/devicetree/bindings/usb/dwc3.txt
|
|
|
|
Example:
|
|
usb@12000000 {
|
|
compatible = "samsung,exynos5250-dwusb3";
|
|
clocks = <&clock 286>;
|
|
clock-names = "usbdrd30";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
dwc3 {
|
|
compatible = "synopsys,dwc3";
|
|
reg = <0x12000000 0x10000>;
|
|
interrupts = <0 72 0>;
|
|
usb-phy = <&usb2_phy &usb3_phy>;
|
|
};
|
|
};
|