mirror of
https://github.com/torvalds/linux.git
synced 2024-12-30 14:52:05 +00:00
8ccba47c69
Add some optional properties for eye diagram test and BC12 of u2phy Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
151 lines
4.6 KiB
Plaintext
151 lines
4.6 KiB
Plaintext
MediaTek T-PHY binding
|
|
--------------------------
|
|
|
|
T-phy controller supports physical layer functionality for a number of
|
|
controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA.
|
|
|
|
Required properties (controller (parent) node):
|
|
- compatible : should be one of
|
|
"mediatek,generic-tphy-v1"
|
|
"mediatek,generic-tphy-v2"
|
|
"mediatek,mt2701-u3phy" (deprecated)
|
|
"mediatek,mt2712-u3phy" (deprecated)
|
|
"mediatek,mt8173-u3phy";
|
|
make use of "mediatek,generic-tphy-v1" on mt2701 instead and
|
|
"mediatek,generic-tphy-v2" on mt2712 instead.
|
|
- clocks : (deprecated, use port's clocks instead) a list of phandle +
|
|
clock-specifier pairs, one for each entry in clock-names
|
|
- clock-names : (deprecated, use port's one instead) must contain
|
|
"u3phya_ref": for reference clock of usb3.0 analog phy.
|
|
|
|
Required nodes : a sub-node is required for each port the controller
|
|
provides. Address range information including the usual
|
|
'reg' property is used inside these nodes to describe
|
|
the controller's topology.
|
|
|
|
Optional properties (controller (parent) node):
|
|
- reg : offset and length of register shared by multiple ports,
|
|
exclude port's private register. It is needed on mt2701
|
|
and mt8173, but not on mt2712.
|
|
- mediatek,src-ref-clk-mhz : frequency of reference clock for slew rate
|
|
calibrate
|
|
- mediatek,src-coef : coefficient for slew rate calibrate, depends on
|
|
SoC process
|
|
|
|
Required properties (port (child) node):
|
|
- reg : address and length of the register set for the port.
|
|
- clocks : a list of phandle + clock-specifier pairs, one for each
|
|
entry in clock-names
|
|
- clock-names : must contain
|
|
"ref": 48M reference clock for HighSpeed analog phy; and 26M
|
|
reference clock for SuperSpeed analog phy, sometimes is
|
|
24M, 25M or 27M, depended on platform.
|
|
- #phy-cells : should be 1 (See second example)
|
|
cell after port phandle is phy type from:
|
|
- PHY_TYPE_USB2
|
|
- PHY_TYPE_USB3
|
|
- PHY_TYPE_PCIE
|
|
- PHY_TYPE_SATA
|
|
|
|
Optional properties (PHY_TYPE_USB2 port (child) node):
|
|
- mediatek,eye-src : u32, the value of slew rate calibrate
|
|
- mediatek,eye-vrt : u32, the selection of VRT reference voltage
|
|
- mediatek,eye-term : u32, the selection of HS_TX TERM reference voltage
|
|
- mediatek,bc12 : bool, enable BC12 of u2phy if support it
|
|
|
|
Example:
|
|
|
|
u3phy: usb-phy@11290000 {
|
|
compatible = "mediatek,mt8173-u3phy";
|
|
reg = <0 0x11290000 0 0x800>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
u2port0: usb-phy@11290800 {
|
|
reg = <0 0x11290800 0 0x100>;
|
|
clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
|
|
clock-names = "ref";
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
u3port0: usb-phy@11290900 {
|
|
reg = <0 0x11290800 0 0x700>;
|
|
clocks = <&clk26m>;
|
|
clock-names = "ref";
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
u2port1: usb-phy@11291000 {
|
|
reg = <0 0x11291000 0 0x100>;
|
|
clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
|
|
clock-names = "ref";
|
|
#phy-cells = <1>;
|
|
};
|
|
};
|
|
|
|
Specifying phy control of devices
|
|
---------------------------------
|
|
|
|
Device nodes should specify the configuration required in their "phys"
|
|
property, containing a phandle to the phy port node and a device type;
|
|
phy-names for each port are optional.
|
|
|
|
Example:
|
|
|
|
#include <dt-bindings/phy/phy.h>
|
|
|
|
usb30: usb@11270000 {
|
|
...
|
|
phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
|
|
phy-names = "usb2-0", "usb3-0";
|
|
...
|
|
};
|
|
|
|
|
|
Layout differences of banks between mt8173/mt2701 and mt2712
|
|
-------------------------------------------------------------
|
|
mt8173 and mt2701:
|
|
port offset bank
|
|
shared 0x0000 SPLLC
|
|
0x0100 FMREG
|
|
u2 port0 0x0800 U2PHY_COM
|
|
u3 port0 0x0900 U3PHYD
|
|
0x0a00 U3PHYD_BANK2
|
|
0x0b00 U3PHYA
|
|
0x0c00 U3PHYA_DA
|
|
u2 port1 0x1000 U2PHY_COM
|
|
u3 port1 0x1100 U3PHYD
|
|
0x1200 U3PHYD_BANK2
|
|
0x1300 U3PHYA
|
|
0x1400 U3PHYA_DA
|
|
u2 port2 0x1800 U2PHY_COM
|
|
...
|
|
|
|
mt2712:
|
|
port offset bank
|
|
u2 port0 0x0000 MISC
|
|
0x0100 FMREG
|
|
0x0300 U2PHY_COM
|
|
u3 port0 0x0700 SPLLC
|
|
0x0800 CHIP
|
|
0x0900 U3PHYD
|
|
0x0a00 U3PHYD_BANK2
|
|
0x0b00 U3PHYA
|
|
0x0c00 U3PHYA_DA
|
|
u2 port1 0x1000 MISC
|
|
0x1100 FMREG
|
|
0x1300 U2PHY_COM
|
|
u3 port1 0x1700 SPLLC
|
|
0x1800 CHIP
|
|
0x1900 U3PHYD
|
|
0x1a00 U3PHYD_BANK2
|
|
0x1b00 U3PHYA
|
|
0x1c00 U3PHYA_DA
|
|
u2 port2 0x2000 MISC
|
|
...
|
|
|
|
SPLLC shared by u3 ports and FMREG shared by u2 ports on
|
|
mt8173/mt2701 are put back into each port; a new bank MISC for
|
|
u2 ports and CHIP for u3 ports are added on mt2712.
|