mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 05:02:12 +00:00
cec148c247
Most of the protocol modules for the pata_parport driver are missing a module description, causing warnings such as: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/ata/pata_parport/aten.o when compiling with W=1. Add the missing MODULE_DESCRIPTION() definitions to avoid these warnings. While at it, also add the missing MODULE_AUTHOR() definitions. Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
299 lines
6.2 KiB
C
299 lines
6.2 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* (c) 1996-1998 Grant R. Guenther <grant@torque.net>
|
|
*
|
|
* frpw.c is a low-level protocol driver for the Freecom "Power" parallel port
|
|
* IDE adapter.
|
|
*
|
|
* Some applications of this adapter may require a "printer" reset prior to
|
|
* loading the driver. This can be done by loading and unloading the "lp"
|
|
* driver, or it can be done by this driver if you define FRPW_HARD_RESET.
|
|
* The latter is not recommended as it may upset devices on other ports.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/wait.h>
|
|
#include <asm/io.h>
|
|
#include "pata_parport.h"
|
|
|
|
#define cec4 w2(0xc);w2(0xe);w2(0xe);w2(0xc);w2(4);w2(4);w2(4);
|
|
#define j44(l,h) (((l>>4)&0x0f)|(h&0xf0))
|
|
|
|
/*
|
|
* cont = 0 - access the IDE register file
|
|
* cont = 1 - access the IDE command set
|
|
*/
|
|
static int cont_map[2] = { 0x08, 0x10 };
|
|
|
|
static int frpw_read_regr(struct pi_adapter *pi, int cont, int regr)
|
|
{
|
|
int h, l, r;
|
|
|
|
r = regr + cont_map[cont];
|
|
|
|
w2(4);
|
|
w0(r); cec4;
|
|
w2(6); l = r1();
|
|
w2(4); h = r1();
|
|
w2(4);
|
|
|
|
return j44(l, h);
|
|
}
|
|
|
|
static void frpw_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
|
|
{
|
|
int r = regr + cont_map[cont];
|
|
|
|
w2(4); w0(r); cec4;
|
|
w0(val);
|
|
w2(5); w2(7); w2(5); w2(4);
|
|
}
|
|
|
|
static void frpw_read_block_int(struct pi_adapter *pi, char *buf, int count,
|
|
int regr)
|
|
{
|
|
int h, l, k, ph;
|
|
|
|
switch (pi->mode) {
|
|
case 0:
|
|
w2(4); w0(regr); cec4;
|
|
for (k = 0; k < count; k++) {
|
|
w2(6); l = r1();
|
|
w2(4); h = r1();
|
|
buf[k] = j44(l, h);
|
|
}
|
|
w2(4);
|
|
break;
|
|
|
|
case 1:
|
|
ph = 2;
|
|
w2(4); w0(regr + 0xc0); cec4;
|
|
w0(0xff);
|
|
for (k = 0; k < count; k++) {
|
|
w2(0xa4 + ph);
|
|
buf[k] = r0();
|
|
ph = 2 - ph;
|
|
}
|
|
w2(0xac); w2(0xa4); w2(4);
|
|
break;
|
|
|
|
case 2:
|
|
w2(4); w0(regr + 0x80); cec4;
|
|
for (k = 0; k < count; k++)
|
|
buf[k] = r4();
|
|
w2(0xac); w2(0xa4);
|
|
w2(4);
|
|
break;
|
|
|
|
case 3:
|
|
w2(4); w0(regr + 0x80); cec4;
|
|
for (k = 0; k < count - 2; k++)
|
|
buf[k] = r4();
|
|
w2(0xac); w2(0xa4);
|
|
buf[count - 2] = r4();
|
|
buf[count - 1] = r4();
|
|
w2(4);
|
|
break;
|
|
|
|
case 4:
|
|
w2(4); w0(regr + 0x80); cec4;
|
|
for (k = 0; k < count / 2 - 1; k++)
|
|
((u16 *)buf)[k] = r4w();
|
|
w2(0xac); w2(0xa4);
|
|
buf[count - 2] = r4();
|
|
buf[count - 1] = r4();
|
|
w2(4);
|
|
break;
|
|
|
|
case 5:
|
|
w2(4); w0(regr + 0x80); cec4;
|
|
for (k = 0; k < count / 4 - 1; k++)
|
|
((u32 *)buf)[k] = r4l();
|
|
buf[count - 4] = r4();
|
|
buf[count - 3] = r4();
|
|
w2(0xac); w2(0xa4);
|
|
buf[count - 2] = r4();
|
|
buf[count - 1] = r4();
|
|
w2(4);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void frpw_read_block(struct pi_adapter *pi, char *buf, int count)
|
|
{
|
|
frpw_read_block_int(pi, buf, count, 0x08);
|
|
}
|
|
|
|
static void frpw_write_block(struct pi_adapter *pi, char *buf, int count)
|
|
{
|
|
int k;
|
|
|
|
switch (pi->mode) {
|
|
case 0:
|
|
case 1:
|
|
case 2:
|
|
w2(4); w0(8); cec4; w2(5);
|
|
for (k = 0; k < count; k++) {
|
|
w0(buf[k]);
|
|
w2(7); w2(5);
|
|
}
|
|
w2(4);
|
|
break;
|
|
|
|
case 3:
|
|
w2(4); w0(0xc8); cec4; w2(5);
|
|
for (k = 0; k < count; k++)
|
|
w4(buf[k]);
|
|
w2(4);
|
|
break;
|
|
|
|
case 4:
|
|
w2(4); w0(0xc8); cec4; w2(5);
|
|
for (k = 0; k < count / 2; k++)
|
|
w4w(((u16 *)buf)[k]);
|
|
w2(4);
|
|
break;
|
|
|
|
case 5:
|
|
w2(4); w0(0xc8); cec4; w2(5);
|
|
for (k = 0; k < count / 4; k++)
|
|
w4l(((u32 *)buf)[k]);
|
|
w2(4);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void frpw_connect(struct pi_adapter *pi)
|
|
{
|
|
pi->saved_r0 = r0();
|
|
pi->saved_r2 = r2();
|
|
w2(4);
|
|
}
|
|
|
|
static void frpw_disconnect(struct pi_adapter *pi)
|
|
{
|
|
w2(4); w0(0x20); cec4;
|
|
w0(pi->saved_r0);
|
|
w2(pi->saved_r2);
|
|
}
|
|
|
|
/*
|
|
* Stub logic to see if PNP string is available - used to distinguish
|
|
* between the Xilinx and ASIC implementations of the Freecom adapter.
|
|
* returns chip_type: 0 = Xilinx, 1 = ASIC
|
|
*/
|
|
static int frpw_test_pnp(struct pi_adapter *pi)
|
|
{
|
|
int olddelay, a, b;
|
|
|
|
#ifdef FRPW_HARD_RESET
|
|
w0(0); w2(8); udelay(50); w2(0xc); /* parallel bus reset */
|
|
mdelay(1500);
|
|
#endif
|
|
|
|
olddelay = pi->delay;
|
|
pi->delay = 10;
|
|
|
|
pi->saved_r0 = r0();
|
|
pi->saved_r2 = r2();
|
|
|
|
w2(4); w0(4); w2(6); w2(7);
|
|
a = r1() & 0xff; w2(4); b = r1() & 0xff;
|
|
w2(0xc); w2(0xe); w2(4);
|
|
|
|
pi->delay = olddelay;
|
|
w0(pi->saved_r0);
|
|
w2(pi->saved_r2);
|
|
|
|
return ((~a & 0x40) && (b & 0x40));
|
|
}
|
|
|
|
/*
|
|
* We use the pi->private to remember the result of the PNP test.
|
|
* To make this work, private = port*2 + chip. Yes, I know it's a hack :-(
|
|
*/
|
|
static int frpw_test_proto(struct pi_adapter *pi)
|
|
{
|
|
int j, k, r;
|
|
int e[2] = { 0, 0 };
|
|
char scratch[512];
|
|
|
|
if ((pi->private >> 1) != pi->port)
|
|
pi->private = frpw_test_pnp(pi) + 2*pi->port;
|
|
|
|
if (((pi->private & 0x1) == 0) && (pi->mode > 2)) {
|
|
dev_dbg(&pi->dev,
|
|
"frpw: Xilinx does not support mode %d\n", pi->mode);
|
|
return 1;
|
|
}
|
|
|
|
if (((pi->private & 0x1) == 1) && (pi->mode == 2)) {
|
|
dev_dbg(&pi->dev, "frpw: ASIC does not support mode 2\n");
|
|
return 1;
|
|
}
|
|
|
|
frpw_connect(pi);
|
|
for (j = 0; j < 2; j++) {
|
|
frpw_write_regr(pi, 0, 6, 0xa0 + j * 0x10);
|
|
for (k = 0; k < 256; k++) {
|
|
frpw_write_regr(pi, 0, 2, k ^ 0xaa);
|
|
frpw_write_regr(pi, 0, 3, k ^ 0x55);
|
|
if (frpw_read_regr(pi, 0, 2) != (k ^ 0xaa))
|
|
e[j]++;
|
|
}
|
|
}
|
|
frpw_disconnect(pi);
|
|
|
|
frpw_connect(pi);
|
|
frpw_read_block_int(pi, scratch, 512, 0x10);
|
|
r = 0;
|
|
for (k = 0; k < 128; k++) {
|
|
if (scratch[k] != k)
|
|
r++;
|
|
}
|
|
frpw_disconnect(pi);
|
|
|
|
dev_dbg(&pi->dev,
|
|
"frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n",
|
|
pi->port, (pi->private%2), pi->mode, e[0], e[1], r);
|
|
|
|
return r || (e[0] && e[1]);
|
|
}
|
|
|
|
static void frpw_log_adapter(struct pi_adapter *pi)
|
|
|
|
{
|
|
char *mode[6] = { "4-bit", "8-bit", "EPP", "EPP-8", "EPP-16", "EPP-32"};
|
|
|
|
dev_info(&pi->dev,
|
|
"Freecom (%s) adapter at 0x%x, mode %d (%s), delay %d\n",
|
|
((pi->private & 0x1) == 0) ? "Xilinx" : "ASIC",
|
|
pi->port, pi->mode, mode[pi->mode], pi->delay);
|
|
}
|
|
|
|
static struct pi_protocol frpw = {
|
|
.owner = THIS_MODULE,
|
|
.name = "frpw",
|
|
.max_mode = 6,
|
|
.epp_first = 2,
|
|
.default_delay = 2,
|
|
.max_units = 1,
|
|
.write_regr = frpw_write_regr,
|
|
.read_regr = frpw_read_regr,
|
|
.write_block = frpw_write_block,
|
|
.read_block = frpw_read_block,
|
|
.connect = frpw_connect,
|
|
.disconnect = frpw_disconnect,
|
|
.test_proto = frpw_test_proto,
|
|
.log_adapter = frpw_log_adapter,
|
|
};
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Grant R. Guenther <grant@torque.net>");
|
|
MODULE_DESCRIPTION("Freecom Power parallel port IDE adapter protocol driver");
|
|
module_pata_parport_driver(frpw);
|