mirror of
https://github.com/torvalds/linux.git
synced 2024-11-07 12:41:55 +00:00
24307caef4
If we shutdown without stopping the gadget first or removing the cable, gadget manages to configure itself again: root@pandora /root# poweroff The system is going down NOW! Requesting system poweroff [ 47.714385] musb-hm halted. [ 48.120697] gadget: suspend [ 48.123748] gadget: reset config [ 48.127227] gadget: ecm deactivated [ 48.130981] usb0: gether_disconnect [ 48.281799] gadget: high-speed config #1: CDC Ethernet (ECM) [ 48.287872] gadget: init ecm [ 48.290985] gadget: notify connect false [ 48.295288] gadget: notify speed 425984000 This is not only unwanted, it's also happening on half-unitialized state, after musb_shutdown() has returned, which sometimes causes hardware to fail to work after reboot. Let's better properly stop gadget on shutdown too. This patch moves musb_gadget_cleanup out of musb_free(), which has 2 callsites: probe error path and musb_remove. On probe error path it was superflous since musb_gadget_cleanup is called explicitly there, and musb_remove() calls musb_shutdown(), so cleanup will get called as before. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com> |
||
|---|---|---|
| .. | ||
| atm | ||
| c67x00 | ||
| class | ||
| core | ||
| dwc3 | ||
| early | ||
| gadget | ||
| host | ||
| image | ||
| misc | ||
| mon | ||
| musb | ||
| otg | ||
| renesas_usbhs | ||
| serial | ||
| storage | ||
| wusbcore | ||
| Kconfig | ||
| Makefile | ||
| README | ||
| usb-common.c | ||
| usb-skeleton.c | ||
To understand all the Linux-USB framework, you'll use these resources:
* This source code. This is necessarily an evolving work, and
includes kerneldoc that should help you get a current overview.
("make pdfdocs", and then look at "usb.pdf" for host side and
"gadget.pdf" for peripheral side.) Also, Documentation/usb has
more information.
* The USB 2.0 specification (from www.usb.org), with supplements
such as those for USB OTG and the various device classes.
The USB specification has a good overview chapter, and USB
peripherals conform to the widely known "Chapter 9".
* Chip specifications for USB controllers. Examples include
host controllers (on PCs, servers, and more); peripheral
controllers (in devices with Linux firmware, like printers or
cell phones); and hard-wired peripherals like Ethernet adapters.
* Specifications for other protocols implemented by USB peripheral
functions. Some are vendor-specific; others are vendor-neutral
but just standardized outside of the www.usb.org team.
Here is a list of what each subdirectory here is, and what is contained in
them.
core/ - This is for the core USB host code, including the
usbfs files and the hub class driver ("khubd").
host/ - This is for USB host controller drivers. This
includes UHCI, OHCI, EHCI, and others that might
be used with more specialized "embedded" systems.
gadget/ - This is for USB peripheral controller drivers and
the various gadget drivers which talk to them.
Individual USB driver directories. A new driver should be added to the
first subdirectory in the list below that it fits into.
image/ - This is for still image drivers, like scanners or
digital cameras.
../input/ - This is for any driver that uses the input subsystem,
like keyboard, mice, touchscreens, tablets, etc.
../media/ - This is for multimedia drivers, like video cameras,
radios, and any other drivers that talk to the v4l
subsystem.
../net/ - This is for network drivers.
serial/ - This is for USB to serial drivers.
storage/ - This is for USB mass-storage drivers.
class/ - This is for all USB device drivers that do not fit
into any of the above categories, and work for a range
of USB Class specified devices.
misc/ - This is for all USB device drivers that do not fit
into any of the above categories.