linux/drivers/usb/musb
Greg Kroah-Hartman 73ad0adcb6 usb: changes for v3.14 merge window
This pull request is quite extensive, containing
 105 non-merge commits. Because of that, we describe
 the changes in sections below:
 
 New drivers:
 	- Keystone PHY driver and DWC3 Glue Layer
 	- Aeroflex Gaisler GRUSBDC
 	- Tahvo PHY driver for N770
 	- JZ4740 MUSB gluer Layer
 	- Broadcom PHY Driver
 
 Important new features:
 	- MUSB DSPS learned about suspend/resume
 	- New quirk_ep_out_aligned_size flag added to struct usb_gadget
 	- DWC3 initializes the new quirk flag so gadget drivers can use it.
 	- AM335x PHY Driver learns about remote wakeup
 	- Renesas USBHS now requests DMA Engine only once
 	- s3c-hsotg is now re-used on Broadcom devices
 	- USB PHY layer now makes sure to initialize the notifier for all
 		drivers
 	- omap-control learned about TI's new AM437x devices
 	- few other usb gadget/function drivers learned about the new
 		configfs-based binding.
 
 Misc Fixes and Clean Ups:
 	- Several sparse fixes all over the place
 	- Removal of redundant of_match_ptr()
 	- r-car gen2 phy now uses usb_add_phy_dev()
 	- removal of DEFINE_PCI_DEVICE_TABLE() from a few drivers
 	- conversion to clk_prepare/clk_unprepare on r8a66597-udc
 	- some randconfig errors and build warnings were fixed
 	- removal of unnecessary lock on dwc3-omap.c
 
 Signed-of-by: Felipe Balbi <balbi@ti.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJSvK5dAAoJEIaOsuA1yqREKrEP/jdrhxgkavR39dgpWj3ujsjf
 jnH9GH9jhLgphpL8jHVxnbu7YHCy2qlHeZMiVksSYwZuAZY3fp00xTpzOCKVyRmr
 LTRvyqTKh90SOqRcx/3MX4DdUf+paG75z7QMQM362fjdogh41sJK76rk+loPjOWf
 mBOmSphQrfDrqBunigdtSVsq3c/kiwWSbU3kzF/wttu//DuMsahxu1D9+UN0yxMl
 NpI84E06ii1qyOt4H5UyN/jWwIcrleC3YFCe5EF+8lRluOjNJCfUD7qOgAOoEVJ/
 OAhgBj+Q47KY39Tz/vfgCuIvKLsnLcnX8SS3mvQQgpa0Rw0EEHyakrD4p07Qfnuk
 H4WfYH0NB/BxKmH6IqQHg/pLWlqAvrqWuHpgO8Y2Mlfr5ILFhzcAM2mTvLVfn6+D
 VJslKXWhVpHWiFsstDdwzqwI9sxoHo1E2QTikkh4jPiD8duaQraneXPkoQn7FW4A
 wMYsPDL1T4wkYfE7vpY2iX76KjRa48FjuQbrxb6hZoKUEWhAqKcaEZWcz8d42DH5
 LmfrpzJPCONos4yfEoxIZJ/Jve2eR82Tx+Pd+OV3/edVCi5VR/RJsxtLdXF6dNkm
 VmZsVT1s9D4QllsTp8/pJyUMRFoxDyhIdlC/22dlULIYq9FYqkc+5lTwpvt621t9
 n/iKABz1jGfM6hhi8Kkj
 =N4//
 -----END PGP SIGNATURE-----

Merge tag 'usb-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: changes for v3.14 merge window

This pull request is quite extensive, containing
105 non-merge commits. Because of that, we describe
the changes in sections below:

New drivers:
	- Keystone PHY driver and DWC3 Glue Layer
	- Aeroflex Gaisler GRUSBDC
	- Tahvo PHY driver for N770
	- JZ4740 MUSB gluer Layer
	- Broadcom PHY Driver

Important new features:
	- MUSB DSPS learned about suspend/resume
	- New quirk_ep_out_aligned_size flag added to struct usb_gadget
	- DWC3 initializes the new quirk flag so gadget drivers can use it.
	- AM335x PHY Driver learns about remote wakeup
	- Renesas USBHS now requests DMA Engine only once
	- s3c-hsotg is now re-used on Broadcom devices
	- USB PHY layer now makes sure to initialize the notifier for all
		drivers
	- omap-control learned about TI's new AM437x devices
	- few other usb gadget/function drivers learned about the new
		configfs-based binding.

Misc Fixes and Clean Ups:
	- Several sparse fixes all over the place
	- Removal of redundant of_match_ptr()
	- r-car gen2 phy now uses usb_add_phy_dev()
	- removal of DEFINE_PCI_DEVICE_TABLE() from a few drivers
	- conversion to clk_prepare/clk_unprepare on r8a66597-udc
	- some randconfig errors and build warnings were fixed
	- removal of unnecessary lock on dwc3-omap.c

Signed-of-by: Felipe Balbi <balbi@ti.com>
2014-01-03 12:15:10 -08:00
..
am35x.c usb: musb: am35x: use SIMPLE_DEV_PM_OPS 2013-10-02 08:21:23 -05:00
blackfin.c usb: musb: blackfin: use SIMPLE_DEV_PM_OPS 2013-10-02 08:21:55 -05:00
blackfin.h
cppi_dma.c usb: musb: dma: merge ->start/stop into create/destroy 2013-07-29 13:53:18 +03:00
cppi_dma.h
da8xx.c usb: musb: use platform_device_register_full() to avoid directly messing with dma masks 2013-10-01 09:31:19 -05:00
davinci.c usb: musb: davinci: fix resources passed to MUSB driver for DM6467 2013-10-01 09:44:01 -05:00
davinci.h
jz4740.c usb: musb: add support for JZ4740 usb device controller 2013-12-20 09:53:24 -06:00
Kconfig usb: musb: Rework USB and USB_GADGET dependency 2013-12-23 10:28:56 -06:00
Makefile usb: musb: add support for JZ4740 usb device controller 2013-12-20 09:53:24 -06:00
musb_am335x.c usb: musb_am335x: Remove redundant of_match_ptr 2013-10-04 09:25:11 -05:00
musb_core.c usb: musb: Remove usb_disable() check in module_init() 2013-12-26 10:17:40 -06:00
musb_core.h usb: musb: finish suspend/reset work independently from musb_hub_control() 2013-12-19 10:31:11 -06:00
musb_cppi41.c usb: musb: musb_cppi41: handle pre-mature TX complete interrupt 2013-11-25 10:54:14 -06:00
musb_debug.h
musb_debugfs.c
musb_dma.h usb: musb dma: add cppi41 dma driver 2013-08-09 17:40:16 +03:00
musb_dsps.c usb: musb: dsps: polling ID pin status only in otg mode 2013-11-26 11:44:40 -06:00
musb_gadget_ep0.c
musb_gadget.c usb: musb: fix setting JZ4740 gadget periphal mode on reset 2013-12-20 09:53:59 -06:00
musb_gadget.h
musb_host.c usb: changes for v3.14 merge window 2014-01-03 12:15:10 -08:00
musb_host.h usb: musb: fix prototype for musb_port_reset 2013-12-20 15:05:43 -06:00
musb_io.h
musb_regs.h
musb_virthub.c usb: musb: fix musb pointer acqusition in musb_host_finish_resume 2013-12-20 15:05:44 -06:00
musbhsdma.c usb: musb: dma: merge ->start/stop into create/destroy 2013-07-29 13:53:18 +03:00
musbhsdma.h
omap2430.c usb: patches for v3.13 2013-10-24 16:18:40 +01:00
omap2430.h
tusb6010_omap.c usb: musb: dma: merge ->start/stop into create/destroy 2013-07-29 13:53:18 +03:00
tusb6010.c usb: musb: use platform_device_register_full() to avoid directly messing with dma masks 2013-10-01 09:31:19 -05:00
tusb6010.h
ux500_dma.c usb: musb: ux500_dma: fix potential NULL dereference error 2013-12-17 13:17:42 -06:00
ux500.c ARM: SoC DT updates for 3.13 2013-11-11 17:34:56 +09:00