mirror of
https://github.com/torvalds/linux.git
synced 2024-12-22 10:56:40 +00:00
214824156c
This Kaffeine's BZ: https://bugs.kde.org/show_bug.cgi?id=374693 affects SkyStar S2 PCI DVB-S/S2 rev 3.3 device. It could be due to a Kernel bug. While checking the Isil 6421, comparing with its manual, available at: http://www.intersil.com/content/dam/Intersil/documents/isl6/isl6421a.pdf It was noticed that, if the output load is highly capacitive, a different approach is recomended when energizing the LNBf. Also, it is possible to detect if a current overload is happening, by checking an special flag. Add support for it. Tested on Skystar S2. Changes respect override_or option so should still work fine on cx88 based cards which disable dynamic current limit. Changes since v1: v2 - fixed incorrect checking of i2c return values v3 - fix if logic to check if dcl needs re-enabling - respect override_or values which aim to disable dcl - only do long sleep on overload if dcl enabled - add short sleep before re-enabling dcl - only check overload and potentially return EINVAL if device is on v4 - revert v3 sleep logic changes to remove tuning delays Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jemma Denson <jdenson@gmail.com>
235 lines
5.6 KiB
C
235 lines
5.6 KiB
C
/*
|
|
* isl6421.h - driver for lnb supply and control ic ISL6421
|
|
*
|
|
* Copyright (C) 2006 Andrew de Quincey
|
|
* Copyright (C) 2006 Oliver Endriss
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* To obtain the license, point your browser to
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*
|
|
*
|
|
* the project's page is at https://linuxtv.org
|
|
*/
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "dvb_frontend.h"
|
|
#include "isl6421.h"
|
|
|
|
struct isl6421 {
|
|
u8 config;
|
|
u8 override_or;
|
|
u8 override_and;
|
|
struct i2c_adapter *i2c;
|
|
u8 i2c_addr;
|
|
bool is_off;
|
|
};
|
|
|
|
static int isl6421_set_voltage(struct dvb_frontend *fe,
|
|
enum fe_sec_voltage voltage)
|
|
{
|
|
int ret;
|
|
u8 buf;
|
|
bool is_off;
|
|
struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv;
|
|
struct i2c_msg msg[2] = {
|
|
{
|
|
.addr = isl6421->i2c_addr,
|
|
.flags = 0,
|
|
.buf = &isl6421->config,
|
|
.len = 1,
|
|
}, {
|
|
.addr = isl6421->i2c_addr,
|
|
.flags = I2C_M_RD,
|
|
.buf = &buf,
|
|
.len = 1,
|
|
}
|
|
|
|
};
|
|
|
|
isl6421->config &= ~(ISL6421_VSEL1 | ISL6421_EN1);
|
|
|
|
switch(voltage) {
|
|
case SEC_VOLTAGE_OFF:
|
|
is_off = true;
|
|
break;
|
|
case SEC_VOLTAGE_13:
|
|
is_off = false;
|
|
isl6421->config |= ISL6421_EN1;
|
|
break;
|
|
case SEC_VOLTAGE_18:
|
|
is_off = false;
|
|
isl6421->config |= (ISL6421_EN1 | ISL6421_VSEL1);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* If LNBf were not powered on, disable dynamic current limit, as,
|
|
* according with datasheet, highly capacitive load on the output may
|
|
* cause a difficult start-up.
|
|
*/
|
|
if (isl6421->is_off && !is_off)
|
|
isl6421->config |= ISL6421_DCL;
|
|
|
|
isl6421->config |= isl6421->override_or;
|
|
isl6421->config &= isl6421->override_and;
|
|
|
|
ret = i2c_transfer(isl6421->i2c, msg, 2);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret != 2)
|
|
return -EIO;
|
|
|
|
/* Store off status now incase future commands fail */
|
|
isl6421->is_off = is_off;
|
|
|
|
/* On overflow, the device will try again after 900 ms (typically) */
|
|
if (!is_off && (buf & ISL6421_OLF1))
|
|
msleep(1000);
|
|
|
|
/* Re-enable dynamic current limit */
|
|
if ((isl6421->config & ISL6421_DCL) &&
|
|
!(isl6421->override_or & ISL6421_DCL)) {
|
|
isl6421->config &= ~ISL6421_DCL;
|
|
|
|
ret = i2c_transfer(isl6421->i2c, msg, 2);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret != 2)
|
|
return -EIO;
|
|
}
|
|
|
|
/* Check if overload flag is active. If so, disable power */
|
|
if (!is_off && (buf & ISL6421_OLF1)) {
|
|
isl6421->config &= ~(ISL6421_VSEL1 | ISL6421_EN1);
|
|
ret = i2c_transfer(isl6421->i2c, msg, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret != 1)
|
|
return -EIO;
|
|
isl6421->is_off = true;
|
|
|
|
dev_warn(&isl6421->i2c->dev,
|
|
"Overload current detected. disabling LNBf power\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int isl6421_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg)
|
|
{
|
|
struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv;
|
|
struct i2c_msg msg = { .addr = isl6421->i2c_addr, .flags = 0,
|
|
.buf = &isl6421->config,
|
|
.len = sizeof(isl6421->config) };
|
|
|
|
if (arg)
|
|
isl6421->config |= ISL6421_LLC1;
|
|
else
|
|
isl6421->config &= ~ISL6421_LLC1;
|
|
|
|
isl6421->config |= isl6421->override_or;
|
|
isl6421->config &= isl6421->override_and;
|
|
|
|
return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO;
|
|
}
|
|
|
|
static int isl6421_set_tone(struct dvb_frontend *fe,
|
|
enum fe_sec_tone_mode tone)
|
|
{
|
|
struct isl6421 *isl6421 = (struct isl6421 *) fe->sec_priv;
|
|
struct i2c_msg msg = { .addr = isl6421->i2c_addr, .flags = 0,
|
|
.buf = &isl6421->config,
|
|
.len = sizeof(isl6421->config) };
|
|
|
|
switch (tone) {
|
|
case SEC_TONE_ON:
|
|
isl6421->config |= ISL6421_ENT1;
|
|
break;
|
|
case SEC_TONE_OFF:
|
|
isl6421->config &= ~ISL6421_ENT1;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
isl6421->config |= isl6421->override_or;
|
|
isl6421->config &= isl6421->override_and;
|
|
|
|
return (i2c_transfer(isl6421->i2c, &msg, 1) == 1) ? 0 : -EIO;
|
|
}
|
|
|
|
static void isl6421_release(struct dvb_frontend *fe)
|
|
{
|
|
/* power off */
|
|
isl6421_set_voltage(fe, SEC_VOLTAGE_OFF);
|
|
|
|
/* free */
|
|
kfree(fe->sec_priv);
|
|
fe->sec_priv = NULL;
|
|
}
|
|
|
|
struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr,
|
|
u8 override_set, u8 override_clear, bool override_tone)
|
|
{
|
|
struct isl6421 *isl6421 = kmalloc(sizeof(struct isl6421), GFP_KERNEL);
|
|
if (!isl6421)
|
|
return NULL;
|
|
|
|
/* default configuration */
|
|
isl6421->config = ISL6421_ISEL1;
|
|
isl6421->i2c = i2c;
|
|
isl6421->i2c_addr = i2c_addr;
|
|
fe->sec_priv = isl6421;
|
|
|
|
/* bits which should be forced to '1' */
|
|
isl6421->override_or = override_set;
|
|
|
|
/* bits which should be forced to '0' */
|
|
isl6421->override_and = ~override_clear;
|
|
|
|
/* detect if it is present or not */
|
|
if (isl6421_set_voltage(fe, SEC_VOLTAGE_OFF)) {
|
|
kfree(isl6421);
|
|
fe->sec_priv = NULL;
|
|
return NULL;
|
|
}
|
|
|
|
isl6421->is_off = true;
|
|
|
|
/* install release callback */
|
|
fe->ops.release_sec = isl6421_release;
|
|
|
|
/* override frontend ops */
|
|
fe->ops.set_voltage = isl6421_set_voltage;
|
|
fe->ops.enable_high_lnb_voltage = isl6421_enable_high_lnb_voltage;
|
|
if (override_tone)
|
|
fe->ops.set_tone = isl6421_set_tone;
|
|
|
|
return fe;
|
|
}
|
|
EXPORT_SYMBOL(isl6421_attach);
|
|
|
|
MODULE_DESCRIPTION("Driver for lnb supply and control ic isl6421");
|
|
MODULE_AUTHOR("Andrew de Quincey & Oliver Endriss");
|
|
MODULE_LICENSE("GPL");
|