mirror of
https://github.com/torvalds/linux.git
synced 2024-12-24 20:01:55 +00:00
ee06b1728b
Keep supporting proprietary "xlnx,phy-type" attribute and add support for MII connectivity to the PHY. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com> Signed-off-by: David S. Miller <davem@davemloft.net>
56 lines
2.0 KiB
Plaintext
56 lines
2.0 KiB
Plaintext
XILINX AXI ETHERNET Device Tree Bindings
|
|
--------------------------------------------------------
|
|
|
|
Also called AXI 1G/2.5G Ethernet Subsystem, the xilinx axi ethernet IP core
|
|
provides connectivity to an external ethernet PHY supporting different
|
|
interfaces: MII, GMII, RGMII, SGMII, 1000BaseX. It also includes two
|
|
segments of memory for buffering TX and RX, as well as the capability of
|
|
offloading TX/RX checksum calculation off the processor.
|
|
|
|
Management configuration is done through the AXI interface, while payload is
|
|
sent and received through means of an AXI DMA controller. This driver
|
|
includes the DMA driver code, so this driver is incompatible with AXI DMA
|
|
driver.
|
|
|
|
For more details about mdio please refer phy.txt file in the same directory.
|
|
|
|
Required properties:
|
|
- compatible : Must be one of "xlnx,axi-ethernet-1.00.a",
|
|
"xlnx,axi-ethernet-1.01.a", "xlnx,axi-ethernet-2.01.a"
|
|
- reg : Address and length of the IO space.
|
|
- interrupts : Should be a list of two interrupt, TX and RX.
|
|
- phy-handle : Should point to the external phy device.
|
|
See ethernet.txt file in the same directory.
|
|
- xlnx,rxmem : Set to allocated memory buffer for Rx/Tx in the hardware
|
|
|
|
Optional properties:
|
|
- phy-mode : See ethernet.txt
|
|
- xlnx,phy-type : Deprecated, do not use, but still accepted in preference
|
|
to phy-mode.
|
|
- xlnx,txcsum : 0 or empty for disabling TX checksum offload,
|
|
1 to enable partial TX checksum offload,
|
|
2 to enable full TX checksum offload
|
|
- xlnx,rxcsum : Same values as xlnx,txcsum but for RX checksum offload
|
|
|
|
Example:
|
|
axi_ethernet_eth: ethernet@40c00000 {
|
|
compatible = "xlnx,axi-ethernet-1.00.a";
|
|
device_type = "network";
|
|
interrupt-parent = <µblaze_0_axi_intc>;
|
|
interrupts = <2 0>;
|
|
phy-mode = "mii";
|
|
reg = <0x40c00000 0x40000>;
|
|
xlnx,rxcsum = <0x2>;
|
|
xlnx,rxmem = <0x800>;
|
|
xlnx,txcsum = <0x2>;
|
|
phy-handle = <&phy0>;
|
|
axi_ethernetlite_0_mdio: mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
phy0: phy@0 {
|
|
device_type = "ethernet-phy";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
};
|