mirror of
https://github.com/torvalds/linux.git
synced 2024-11-25 13:41:51 +00:00
b0eed39762
Documentation say that clock internal config needs to be set BEFORE chip is enabled. Align code to this and move the CHIP enable after the CHIP is configured. While at it also make use of STATUS reg and check when STARTUP is completed instead of sleep for 1-2 ms. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20240712004556.15601-3-ansuelsmth@gmail.com Signed-off-by: Lee Jones <lee@kernel.org>
545 lines
14 KiB
C
545 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2024 Christian Marangi <ansuelsmth@gmail.com>
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/cleanup.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_data/leds-lp55xx.h>
|
|
#include <linux/slab.h>
|
|
#include <dt-bindings/leds/leds-lp55xx.h>
|
|
|
|
#include "leds-lp55xx-common.h"
|
|
|
|
#define LP5569_MAX_LEDS 9
|
|
|
|
/* Memory is used like this:
|
|
* 0x00 engine 1 program (4 pages)
|
|
* 0x40 engine 2 program (4 pages)
|
|
* 0x80 engine 3 program (4 pages)
|
|
* 0xc0 engine 1 muxing info (1 page)
|
|
* 0xd0 engine 2 muxing info (1 page)
|
|
* 0xe0 engine 3 muxing info (1 page)
|
|
*/
|
|
#define LP5569_PAGES_PER_ENGINE 4
|
|
|
|
#define LP5569_REG_ENABLE 0x00
|
|
#define LP5569_ENABLE BIT(6)
|
|
|
|
#define LP5569_REG_EXEC_CTRL 0x01
|
|
#define LP5569_MODE_ENG_SHIFT 2
|
|
|
|
#define LP5569_REG_OP_MODE 0x02
|
|
#define LP5569_EXEC_ENG_SHIFT 2
|
|
|
|
#define LP5569_REG_ENABLE_LEDS_MSB 0x04
|
|
#define LP5569_REG_ENABLE_LEDS_LSB 0x05
|
|
#define LP5569_REG_LED_CTRL_BASE 0x07
|
|
#define LP5569_FADER_MAPPING_MASK GENMASK(7, 5)
|
|
#define LP5569_REG_LED_PWM_BASE 0x16
|
|
#define LP5569_REG_LED_CURRENT_BASE 0x22
|
|
#define LP5569_REG_MISC 0x2F
|
|
#define LP5569_AUTO_INC BIT(6)
|
|
#define LP5569_PWR_SAVE BIT(5)
|
|
#define LP5569_CP_MODE_MASK GENMASK(4, 3)
|
|
#define LP5569_PWM_PWR_SAVE BIT(2)
|
|
#define LP5569_INTERNAL_CLK BIT(0)
|
|
#define LP5569_REG_MISC2 0x33
|
|
#define LP5569_LED_SHORT_TEST BIT(4)
|
|
#define LP5569_LED_OPEN_TEST BIT(3)
|
|
#define LP5569_REG_STATUS 0x3C
|
|
#define LP5569_MASK_BUSY BIT(7)
|
|
#define LP5569_STARTUP_BUSY BIT(6)
|
|
#define LP5569_ENGINE_BUSY BIT(5)
|
|
#define LP5569_ENGINE1_INT BIT(2)
|
|
#define LP5569_ENGINE2_INT BIT(1)
|
|
#define LP5569_ENGINE3_INT BIT(0)
|
|
#define LP5569_ENG_STATUS_MASK (LP5569_ENGINE1_INT | LP5569_ENGINE2_INT | \
|
|
LP5569_ENGINE3_INT)
|
|
#define LP5569_REG_IO_CONTROL 0x3D
|
|
#define LP5569_CLK_OUTPUT BIT(3)
|
|
#define LP5569_REG_RESET 0x3F
|
|
#define LP5569_RESET 0xFF
|
|
#define LP5569_REG_MASTER_FADER_BASE 0x46
|
|
#define LP5569_REG_CH1_PROG_START 0x4B
|
|
#define LP5569_REG_CH2_PROG_START 0x4C
|
|
#define LP5569_REG_CH3_PROG_START 0x4D
|
|
#define LP5569_REG_PROG_PAGE_SEL 0x4F
|
|
#define LP5569_REG_PROG_MEM 0x50
|
|
#define LP5569_REG_LED_FAULT1 0x81
|
|
#define LP5569_LED_FAULT8 BIT(0)
|
|
#define LP5569_REG_LED_FAULT2 0x82
|
|
#define LP5569_LED_FAULT7 BIT(7)
|
|
#define LP5569_LED_FAULT6 BIT(6)
|
|
#define LP5569_LED_FAULT5 BIT(5)
|
|
#define LP5569_LED_FAULT4 BIT(4)
|
|
#define LP5569_LED_FAULT3 BIT(3)
|
|
#define LP5569_LED_FAULT2 BIT(2)
|
|
#define LP5569_LED_FAULT1 BIT(1)
|
|
#define LP5569_LED_FAULT0 BIT(0)
|
|
|
|
#define LP5569_ENG1_PROG_ADDR 0x0
|
|
#define LP5569_ENG2_PROG_ADDR 0x40
|
|
#define LP5569_ENG3_PROG_ADDR 0x80
|
|
#define LP5569_ENG1_MUX_ADDR 0xc0
|
|
#define LP5569_ENG2_MUX_ADDR 0xd0
|
|
#define LP5569_ENG3_MUX_ADDR 0xe0
|
|
|
|
#define LP5569_STARTUP_SLEEP 500
|
|
|
|
#define LEDn_STATUS_FAULT(n, status) ((status) >> (n) & BIT(0))
|
|
|
|
#define LP5569_DEFAULT_CONFIG \
|
|
(LP5569_AUTO_INC | LP5569_PWR_SAVE | LP5569_PWM_PWR_SAVE)
|
|
|
|
static void lp5569_run_engine(struct lp55xx_chip *chip, bool start)
|
|
{
|
|
if (!start) {
|
|
lp55xx_stop_engine(chip);
|
|
lp55xx_turn_off_channels(chip);
|
|
return;
|
|
}
|
|
|
|
lp55xx_run_engine_common(chip);
|
|
}
|
|
|
|
static int lp5569_init_program_engine(struct lp55xx_chip *chip)
|
|
{
|
|
int i;
|
|
int j;
|
|
int ret;
|
|
u8 status;
|
|
/* Precompiled pattern per ENGINE setting LED MUX start and stop addresses */
|
|
static const u8 pattern[][LP55xx_BYTES_PER_PAGE] = {
|
|
{ 0x9c, LP5569_ENG1_MUX_ADDR, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0},
|
|
{ 0x9c, LP5569_ENG2_MUX_ADDR, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0},
|
|
{ 0x9c, LP5569_ENG3_MUX_ADDR, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
|
|
};
|
|
|
|
/* Setup each ENGINE program start address */
|
|
ret = lp55xx_write(chip, LP5569_REG_CH1_PROG_START, LP5569_ENG1_PROG_ADDR);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lp55xx_write(chip, LP5569_REG_CH2_PROG_START, LP5569_ENG2_PROG_ADDR);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lp55xx_write(chip, LP5569_REG_CH3_PROG_START, LP5569_ENG3_PROG_ADDR);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Write precompiled pattern for LED MUX address space for each ENGINE */
|
|
for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) {
|
|
chip->engine_idx = i;
|
|
lp55xx_load_engine(chip);
|
|
|
|
for (j = 0; j < LP55xx_BYTES_PER_PAGE; j++) {
|
|
ret = lp55xx_write(chip, LP5569_REG_PROG_MEM + j,
|
|
pattern[i - 1][j]);
|
|
if (ret)
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
lp5569_run_engine(chip, true);
|
|
|
|
/* Let the programs run for couple of ms and check the engine status */
|
|
usleep_range(3000, 6000);
|
|
lp55xx_read(chip, LP5569_REG_STATUS, &status);
|
|
status = FIELD_GET(LP5569_ENG_STATUS_MASK, status);
|
|
|
|
if (status != LP5569_ENG_STATUS_MASK) {
|
|
dev_err(&chip->cl->dev,
|
|
"could not configure LED engine, status = 0x%.2x\n",
|
|
status);
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
out:
|
|
lp55xx_stop_all_engine(chip);
|
|
return ret;
|
|
}
|
|
|
|
static int lp5569_post_init_device(struct lp55xx_chip *chip)
|
|
{
|
|
int ret;
|
|
u8 val;
|
|
|
|
val = LP5569_DEFAULT_CONFIG;
|
|
val |= FIELD_PREP(LP5569_CP_MODE_MASK, chip->pdata->charge_pump_mode);
|
|
ret = lp55xx_write(chip, LP5569_REG_MISC, val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (chip->pdata->clock_mode == LP55XX_CLOCK_INT) {
|
|
/* Internal clock MUST be configured before CLK output */
|
|
ret = lp55xx_update_bits(chip, LP5569_REG_MISC,
|
|
LP5569_INTERNAL_CLK,
|
|
LP5569_INTERNAL_CLK);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lp55xx_update_bits(chip, LP5569_REG_IO_CONTROL,
|
|
LP5569_CLK_OUTPUT,
|
|
LP5569_CLK_OUTPUT);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = lp55xx_write(chip, LP5569_REG_ENABLE, LP5569_ENABLE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
read_poll_timeout(lp55xx_read, ret, !(val & LP5569_STARTUP_BUSY),
|
|
LP5569_STARTUP_SLEEP, LP5569_STARTUP_SLEEP * 10, false,
|
|
chip, LP5569_REG_STATUS, &val);
|
|
|
|
return lp5569_init_program_engine(chip);
|
|
}
|
|
|
|
static ssize_t lp5569_led_open_test(struct lp55xx_led *led, char *buf)
|
|
{
|
|
struct lp55xx_chip *chip = led->chip;
|
|
struct lp55xx_platform_data *pdata = chip->pdata;
|
|
bool leds_fault[LP5569_MAX_LEDS];
|
|
struct lp55xx_led *led_tmp = led;
|
|
int i, ret, pos = 0;
|
|
u8 status;
|
|
|
|
/* Set in STANDBY state */
|
|
ret = lp55xx_write(chip, LP5569_REG_ENABLE, 0);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/* Wait 1ms for device to enter STANDBY state */
|
|
usleep_range(1000, 2000);
|
|
|
|
/* Set Charge Pump to 1.5x */
|
|
ret = lp55xx_update_bits(chip, LP5569_REG_MISC,
|
|
FIELD_PREP(LP5569_CP_MODE_MASK, LP55XX_CP_BOOST),
|
|
LP5569_CP_MODE_MASK);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/* Enable LED Open Test */
|
|
ret = lp55xx_update_bits(chip, LP5569_REG_MISC2, LP5569_LED_OPEN_TEST,
|
|
LP5569_LED_OPEN_TEST);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/* Put Device in NORMAL state */
|
|
ret = lp55xx_write(chip, LP5569_REG_ENABLE, LP5569_ENABLE);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/* Wait 500 us for device to enter NORMAL state */
|
|
usleep_range(500, 750);
|
|
|
|
/* Enable LED and set to 100% brightness */
|
|
for (i = 0; i < pdata->num_channels; i++) {
|
|
ret = lp55xx_write(chip, LP5569_REG_LED_PWM_BASE + led_tmp->chan_nr,
|
|
LED_FULL);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
led_tmp++;
|
|
}
|
|
|
|
/* Wait 500 us for device to fill status regs */
|
|
usleep_range(500, 750);
|
|
|
|
/* Parse status led fault 1 regs */
|
|
ret = lp55xx_read(chip, LP5569_REG_LED_FAULT1, &status);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
for (i = 0; i < 8; i++)
|
|
leds_fault[i] = !!((status >> i) & 0x1);
|
|
|
|
/* Parse status led fault 2 regs */
|
|
ret = lp55xx_read(chip, LP5569_REG_LED_FAULT2, &status);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
for (i = 0; i < 1; i++)
|
|
leds_fault[i + 8] = !!((status >> i) & 0x1);
|
|
|
|
/* Report LED fault */
|
|
led_tmp = led;
|
|
for (i = 0; i < pdata->num_channels; i++) {
|
|
if (leds_fault[led_tmp->chan_nr])
|
|
pos += sysfs_emit_at(buf, pos, "LED %d OPEN FAIL\n",
|
|
led_tmp->chan_nr);
|
|
|
|
led_tmp++;
|
|
}
|
|
|
|
ret = pos;
|
|
|
|
exit:
|
|
/* Disable LED Open Test */
|
|
lp55xx_update_bits(chip, LP5569_REG_MISC2, LP5569_LED_OPEN_TEST, 0);
|
|
|
|
led_tmp = led;
|
|
for (i = 0; i < pdata->num_channels; i++) {
|
|
lp55xx_write(chip, LP5569_REG_LED_PWM_BASE + led_tmp->chan_nr, 0);
|
|
|
|
led_tmp++;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t lp5569_led_short_test(struct lp55xx_led *led, char *buf)
|
|
{
|
|
struct lp55xx_chip *chip = led->chip;
|
|
struct lp55xx_platform_data *pdata = chip->pdata;
|
|
bool leds_fault[LP5569_MAX_LEDS];
|
|
struct lp55xx_led *led_tmp = led;
|
|
int i, ret, pos = 0;
|
|
u8 status;
|
|
|
|
/* Set in STANDBY state */
|
|
ret = lp55xx_write(chip, LP5569_REG_ENABLE, 0);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/* Wait 1ms for device to enter STANDBY state */
|
|
usleep_range(1000, 2000);
|
|
|
|
/* Set Charge Pump to 1x */
|
|
ret = lp55xx_update_bits(chip, LP5569_REG_MISC,
|
|
FIELD_PREP(LP5569_CP_MODE_MASK, LP55XX_CP_BYPASS),
|
|
LP5569_CP_MODE_MASK);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/* Enable LED and set to 100% brightness and current to 100% (25.5mA) */
|
|
for (i = 0; i < pdata->num_channels; i++) {
|
|
ret = lp55xx_write(chip, LP5569_REG_LED_PWM_BASE + led_tmp->chan_nr,
|
|
LED_FULL);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
ret = lp55xx_write(chip, LP5569_REG_LED_CURRENT_BASE + led_tmp->chan_nr,
|
|
LED_FULL);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
led_tmp++;
|
|
}
|
|
|
|
/* Put Device in NORMAL state */
|
|
ret = lp55xx_write(chip, LP5569_REG_ENABLE, LP5569_ENABLE);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/* Wait 500 us for device to enter NORMAL state */
|
|
usleep_range(500, 750);
|
|
|
|
/* Enable LED Shorted Test */
|
|
ret = lp55xx_update_bits(chip, LP5569_REG_MISC2, LP5569_LED_OPEN_TEST,
|
|
LP5569_LED_SHORT_TEST);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/* Wait 500 us for device to fill status regs */
|
|
usleep_range(500, 750);
|
|
|
|
/* Parse status led fault 1 regs */
|
|
ret = lp55xx_read(chip, LP5569_REG_LED_FAULT1, &status);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
for (i = 0; i < 8; i++)
|
|
leds_fault[i] = !!LEDn_STATUS_FAULT(i, status);
|
|
|
|
/* Parse status led fault 2 regs */
|
|
ret = lp55xx_read(chip, LP5569_REG_LED_FAULT2, &status);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
for (i = 0; i < 1; i++)
|
|
leds_fault[i + 8] = !!LEDn_STATUS_FAULT(i, status);
|
|
|
|
/* Report LED fault */
|
|
led_tmp = led;
|
|
for (i = 0; i < pdata->num_channels; i++) {
|
|
if (leds_fault[led_tmp->chan_nr])
|
|
pos += sysfs_emit_at(buf, pos, "LED %d SHORTED FAIL\n",
|
|
led_tmp->chan_nr);
|
|
|
|
led_tmp++;
|
|
}
|
|
|
|
ret = pos;
|
|
|
|
exit:
|
|
/* Disable LED Shorted Test */
|
|
lp55xx_update_bits(chip, LP5569_REG_MISC2, LP5569_LED_SHORT_TEST, 0);
|
|
|
|
led_tmp = led;
|
|
for (i = 0; i < pdata->num_channels; i++) {
|
|
lp55xx_write(chip, LP5569_REG_LED_PWM_BASE + led_tmp->chan_nr, 0);
|
|
|
|
led_tmp++;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t lp5569_selftest(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
|
|
struct lp55xx_chip *chip = led->chip;
|
|
int i, pos = 0;
|
|
|
|
guard(mutex)(&chip->lock);
|
|
|
|
/* Test LED Open */
|
|
pos = lp5569_led_open_test(led, buf);
|
|
if (pos < 0)
|
|
return sprintf(buf, "FAIL\n");
|
|
|
|
/* Test LED Shorted */
|
|
pos += lp5569_led_short_test(led, buf);
|
|
if (pos < 0)
|
|
return sprintf(buf, "FAIL\n");
|
|
|
|
for (i = 0; i < chip->pdata->num_channels; i++) {
|
|
/* Restore current */
|
|
lp55xx_write(chip, LP5569_REG_LED_CURRENT_BASE + led->chan_nr,
|
|
led->led_current);
|
|
|
|
/* Restore brightness */
|
|
lp55xx_write(chip, LP5569_REG_LED_PWM_BASE + led->chan_nr,
|
|
led->brightness);
|
|
led++;
|
|
}
|
|
|
|
return pos == 0 ? sysfs_emit(buf, "OK\n") : pos;
|
|
}
|
|
|
|
LP55XX_DEV_ATTR_ENGINE_MODE(1);
|
|
LP55XX_DEV_ATTR_ENGINE_MODE(2);
|
|
LP55XX_DEV_ATTR_ENGINE_MODE(3);
|
|
LP55XX_DEV_ATTR_ENGINE_LEDS(1);
|
|
LP55XX_DEV_ATTR_ENGINE_LEDS(2);
|
|
LP55XX_DEV_ATTR_ENGINE_LEDS(3);
|
|
LP55XX_DEV_ATTR_ENGINE_LOAD(1);
|
|
LP55XX_DEV_ATTR_ENGINE_LOAD(2);
|
|
LP55XX_DEV_ATTR_ENGINE_LOAD(3);
|
|
static LP55XX_DEV_ATTR_RO(selftest, lp5569_selftest);
|
|
LP55XX_DEV_ATTR_MASTER_FADER(1);
|
|
LP55XX_DEV_ATTR_MASTER_FADER(2);
|
|
LP55XX_DEV_ATTR_MASTER_FADER(3);
|
|
static LP55XX_DEV_ATTR_RW(master_fader_leds, lp55xx_show_master_fader_leds,
|
|
lp55xx_store_master_fader_leds);
|
|
|
|
static struct attribute *lp5569_attributes[] = {
|
|
&dev_attr_engine1_mode.attr,
|
|
&dev_attr_engine2_mode.attr,
|
|
&dev_attr_engine3_mode.attr,
|
|
&dev_attr_engine1_load.attr,
|
|
&dev_attr_engine2_load.attr,
|
|
&dev_attr_engine3_load.attr,
|
|
&dev_attr_engine1_leds.attr,
|
|
&dev_attr_engine2_leds.attr,
|
|
&dev_attr_engine3_leds.attr,
|
|
&dev_attr_selftest.attr,
|
|
&dev_attr_master_fader1.attr,
|
|
&dev_attr_master_fader2.attr,
|
|
&dev_attr_master_fader3.attr,
|
|
&dev_attr_master_fader_leds.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group lp5569_group = {
|
|
.attrs = lp5569_attributes,
|
|
};
|
|
|
|
/* Chip specific configurations */
|
|
static struct lp55xx_device_config lp5569_cfg = {
|
|
.reg_op_mode = {
|
|
.addr = LP5569_REG_OP_MODE,
|
|
.shift = LP5569_MODE_ENG_SHIFT,
|
|
},
|
|
.reg_exec = {
|
|
.addr = LP5569_REG_EXEC_CTRL,
|
|
.shift = LP5569_EXEC_ENG_SHIFT,
|
|
},
|
|
.reset = {
|
|
.addr = LP5569_REG_RESET,
|
|
.val = LP5569_RESET,
|
|
},
|
|
.enable = {
|
|
.addr = LP5569_REG_ENABLE,
|
|
.val = LP5569_ENABLE,
|
|
},
|
|
.prog_mem_base = {
|
|
.addr = LP5569_REG_PROG_MEM,
|
|
},
|
|
.reg_led_pwm_base = {
|
|
.addr = LP5569_REG_LED_PWM_BASE,
|
|
},
|
|
.reg_led_current_base = {
|
|
.addr = LP5569_REG_LED_CURRENT_BASE,
|
|
},
|
|
.reg_master_fader_base = {
|
|
.addr = LP5569_REG_MASTER_FADER_BASE,
|
|
},
|
|
.reg_led_ctrl_base = {
|
|
.addr = LP5569_REG_LED_CTRL_BASE,
|
|
},
|
|
.pages_per_engine = LP5569_PAGES_PER_ENGINE,
|
|
.max_channel = LP5569_MAX_LEDS,
|
|
.post_init_device = lp5569_post_init_device,
|
|
.brightness_fn = lp55xx_led_brightness,
|
|
.multicolor_brightness_fn = lp55xx_multicolor_brightness,
|
|
.set_led_current = lp55xx_set_led_current,
|
|
.firmware_cb = lp55xx_firmware_loaded_cb,
|
|
.run_engine = lp5569_run_engine,
|
|
.dev_attr_group = &lp5569_group,
|
|
};
|
|
|
|
static const struct i2c_device_id lp5569_id[] = {
|
|
{ "lp5569", .driver_data = (kernel_ulong_t)&lp5569_cfg, },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, lp5569_id);
|
|
|
|
static const struct of_device_id of_lp5569_leds_match[] = {
|
|
{ .compatible = "ti,lp5569", .data = &lp5569_cfg, },
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, of_lp5569_leds_match);
|
|
|
|
static struct i2c_driver lp5569_driver = {
|
|
.driver = {
|
|
.name = "lp5569",
|
|
.of_match_table = of_lp5569_leds_match,
|
|
},
|
|
.probe = lp55xx_probe,
|
|
.remove = lp55xx_remove,
|
|
.id_table = lp5569_id,
|
|
};
|
|
|
|
module_i2c_driver(lp5569_driver);
|
|
|
|
MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
|
|
MODULE_DESCRIPTION("LP5569 LED engine");
|
|
MODULE_LICENSE("GPL");
|