mirror of
https://github.com/torvalds/linux.git
synced 2024-12-25 04:11:49 +00:00
4d256e4d8a
Before making the conversion to the RST (reStructured Text) format, there are changes needed to the documentation so that there are no build errors. Also fixed old/broken URLs to the correct or updated URL. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
528 lines
23 KiB
Plaintext
528 lines
23 KiB
Plaintext
.. SPDX-License-Identifier: GPL-2.0+
|
|
|
|
Linux* Base Driver for the Intel(R) Ethernet 10 Gigabit PCI Express Adapters
|
|
=============================================================================
|
|
|
|
Intel 10 Gigabit Linux driver.
|
|
Copyright(c) 1999-2018 Intel Corporation.
|
|
|
|
Contents
|
|
========
|
|
|
|
- Identifying Your Adapter
|
|
- Command Line Parameters
|
|
- Additional Configurations
|
|
- Known Issues
|
|
- Support
|
|
|
|
Identifying Your Adapter
|
|
========================
|
|
The driver is compatible with devices based on the following:
|
|
|
|
* Intel(R) Ethernet Controller 82598
|
|
* Intel(R) Ethernet Controller 82599
|
|
* Intel(R) Ethernet Controller X520
|
|
* Intel(R) Ethernet Controller X540
|
|
* Intel(R) Ethernet Controller x550
|
|
* Intel(R) Ethernet Controller X552
|
|
* Intel(R) Ethernet Controller X553
|
|
|
|
For information on how to identify your adapter, and for the latest Intel
|
|
network drivers, refer to the Intel Support website:
|
|
https://www.intel.com/support
|
|
|
|
SFP+ Devices with Pluggable Optics
|
|
----------------------------------
|
|
|
|
82599-BASED ADAPTERS
|
|
~~~~~~~~~~~~~~~~~~~~
|
|
NOTES:
|
|
- If your 82599-based Intel(R) Network Adapter came with Intel optics or is an
|
|
Intel(R) Ethernet Server Adapter X520-2, then it only supports Intel optics
|
|
and/or the direct attach cables listed below.
|
|
- When 82599-based SFP+ devices are connected back to back, they should be set
|
|
to the same Speed setting via ethtool. Results may vary if you mix speed
|
|
settings.
|
|
|
|
+---------------+---------------------------------------+------------------+
|
|
| Supplier | Type | Part Numbers |
|
|
+===============+=======================================+==================+
|
|
| SR Modules |
|
|
+---------------+---------------------------------------+------------------+
|
|
| Intel | DUAL RATE 1G/10G SFP+ SR (bailed) | FTLX8571D3BCV-IT |
|
|
+---------------+---------------------------------------+------------------+
|
|
| Intel | DUAL RATE 1G/10G SFP+ SR (bailed) | AFBR-703SDZ-IN2 |
|
|
+---------------+---------------------------------------+------------------+
|
|
| Intel | DUAL RATE 1G/10G SFP+ SR (bailed) | AFBR-703SDDZ-IN1 |
|
|
+---------------+---------------------------------------+------------------+
|
|
| LR Modules |
|
|
+---------------+---------------------------------------+------------------+
|
|
| Intel | DUAL RATE 1G/10G SFP+ LR (bailed) | FTLX1471D3BCV-IT |
|
|
+---------------+---------------------------------------+------------------+
|
|
| Intel | DUAL RATE 1G/10G SFP+ LR (bailed) | AFCT-701SDZ-IN2 |
|
|
+---------------+---------------------------------------+------------------+
|
|
| Intel | DUAL RATE 1G/10G SFP+ LR (bailed) | AFCT-701SDDZ-IN1 |
|
|
+---------------+---------------------------------------+------------------+
|
|
|
|
The following is a list of 3rd party SFP+ modules that have received some
|
|
testing. Not all modules are applicable to all devices.
|
|
|
|
+---------------+---------------------------------------+------------------+
|
|
| Supplier | Type | Part Numbers |
|
|
+===============+=======================================+==================+
|
|
| Finisar | SFP+ SR bailed, 10g single rate | FTLX8571D3BCL |
|
|
+---------------+---------------------------------------+------------------+
|
|
| Avago | SFP+ SR bailed, 10g single rate | AFBR-700SDZ |
|
|
+---------------+---------------------------------------+------------------+
|
|
| Finisar | SFP+ LR bailed, 10g single rate | FTLX1471D3BCL |
|
|
+---------------+---------------------------------------+------------------+
|
|
| Finisar | DUAL RATE 1G/10G SFP+ SR (No Bail) | FTLX8571D3QCV-IT |
|
|
+---------------+---------------------------------------+------------------+
|
|
| Avago | DUAL RATE 1G/10G SFP+ SR (No Bail) | AFBR-703SDZ-IN1 |
|
|
+---------------+---------------------------------------+------------------+
|
|
| Finisar | DUAL RATE 1G/10G SFP+ LR (No Bail) | FTLX1471D3QCV-IT |
|
|
+---------------+---------------------------------------+------------------+
|
|
| Avago | DUAL RATE 1G/10G SFP+ LR (No Bail) | AFCT-701SDZ-IN1 |
|
|
+---------------+---------------------------------------+------------------+
|
|
| Finisar | 1000BASE-T SFP | FCLF8522P2BTL |
|
|
+---------------+---------------------------------------+------------------+
|
|
| Avago | 1000BASE-T | ABCU-5710RZ |
|
|
+---------------+---------------------------------------+------------------+
|
|
| HP | 1000BASE-SX SFP | 453153-001 |
|
|
+---------------+---------------------------------------+------------------+
|
|
|
|
82599-based adapters support all passive and active limiting direct attach
|
|
cables that comply with SFF-8431 v4.1 and SFF-8472 v10.4 specifications.
|
|
|
|
Laser turns off for SFP+ when ifconfig ethX down
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
"ifconfig ethX down" turns off the laser for 82599-based SFP+ fiber adapters.
|
|
"ifconfig ethX up" turns on the laser.
|
|
Alternatively, you can use "ip link set [down/up] dev ethX" to turn the
|
|
laser off and on.
|
|
|
|
|
|
82599-based QSFP+ Adapters
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
NOTES:
|
|
- If your 82599-based Intel(R) Network Adapter came with Intel optics, it only
|
|
supports Intel optics.
|
|
- 82599-based QSFP+ adapters only support 4x10 Gbps connections. 1x40 Gbps
|
|
connections are not supported. QSFP+ link partners must be configured for
|
|
4x10 Gbps.
|
|
- 82599-based QSFP+ adapters do not support automatic link speed detection.
|
|
The link speed must be configured to either 10 Gbps or 1 Gbps to match the link
|
|
partners speed capabilities. Incorrect speed configurations will result in
|
|
failure to link.
|
|
- Intel(R) Ethernet Converged Network Adapter X520-Q1 only supports the optics
|
|
and direct attach cables listed below.
|
|
|
|
+---------------+---------------------------------------+------------------+
|
|
| Supplier | Type | Part Numbers |
|
|
+===============+=======================================+==================+
|
|
| Intel | DUAL RATE 1G/10G QSFP+ SRL (bailed) | E10GQSFPSR |
|
|
+---------------+---------------------------------------+------------------+
|
|
|
|
82599-based QSFP+ adapters support all passive and active limiting QSFP+
|
|
direct attach cables that comply with SFF-8436 v4.1 specifications.
|
|
|
|
82598-BASED ADAPTERS
|
|
~~~~~~~~~~~~~~~~~~~~
|
|
NOTES:
|
|
- Intel(r) Ethernet Network Adapters that support removable optical modules
|
|
only support their original module type (for example, the Intel(R) 10 Gigabit
|
|
SR Dual Port Express Module only supports SR optical modules). If you plug in
|
|
a different type of module, the driver will not load.
|
|
- Hot Swapping/hot plugging optical modules is not supported.
|
|
- Only single speed, 10 gigabit modules are supported.
|
|
- LAN on Motherboard (LOMs) may support DA, SR, or LR modules. Other module
|
|
types are not supported. Please see your system documentation for details.
|
|
|
|
The following is a list of SFP+ modules and direct attach cables that have
|
|
received some testing. Not all modules are applicable to all devices.
|
|
|
|
+---------------+---------------------------------------+------------------+
|
|
| Supplier | Type | Part Numbers |
|
|
+===============+=======================================+==================+
|
|
| Finisar | SFP+ SR bailed, 10g single rate | FTLX8571D3BCL |
|
|
+---------------+---------------------------------------+------------------+
|
|
| Avago | SFP+ SR bailed, 10g single rate | AFBR-700SDZ |
|
|
+---------------+---------------------------------------+------------------+
|
|
| Finisar | SFP+ LR bailed, 10g single rate | FTLX1471D3BCL |
|
|
+---------------+---------------------------------------+------------------+
|
|
|
|
82598-based adapters support all passive direct attach cables that comply with
|
|
SFF-8431 v4.1 and SFF-8472 v10.4 specifications. Active direct attach cables
|
|
are not supported.
|
|
|
|
Third party optic modules and cables referred to above are listed only for the
|
|
purpose of highlighting third party specifications and potential
|
|
compatibility, and are not recommendations or endorsements or sponsorship of
|
|
any third party's product by Intel. Intel is not endorsing or promoting
|
|
products made by any third party and the third party reference is provided
|
|
only to share information regarding certain optic modules and cables with the
|
|
above specifications. There may be other manufacturers or suppliers, producing
|
|
or supplying optic modules and cables with similar or matching descriptions.
|
|
Customers must use their own discretion and diligence to purchase optic
|
|
modules and cables from any third party of their choice. Customers are solely
|
|
responsible for assessing the suitability of the product and/or devices and
|
|
for the selection of the vendor for purchasing any product. THE OPTIC MODULES
|
|
AND CABLES REFERRED TO ABOVE ARE NOT WARRANTED OR SUPPORTED BY INTEL. INTEL
|
|
ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED
|
|
WARRANTY, RELATING TO SALE AND/OR USE OF SUCH THIRD PARTY PRODUCTS OR
|
|
SELECTION OF VENDOR BY CUSTOMERS.
|
|
|
|
Command Line Parameters
|
|
=======================
|
|
|
|
max_vfs
|
|
-------
|
|
:Valid Range: 1-63
|
|
|
|
This parameter adds support for SR-IOV. It causes the driver to spawn up to
|
|
max_vfs worth of virtual functions.
|
|
If the value is greater than 0 it will also force the VMDq parameter to be 1 or
|
|
more.
|
|
|
|
NOTE: This parameter is only used on kernel 3.7.x and below. On kernel 3.8.x
|
|
and above, use sysfs to enable VFs. Also, for Red Hat distributions, this
|
|
parameter is only used on version 6.6 and older. For version 6.7 and newer, use
|
|
sysfs. For example::
|
|
|
|
#echo $num_vf_enabled > /sys/class/net/$dev/device/sriov_numvfs // enable VFs
|
|
#echo 0 > /sys/class/net/$dev/device/sriov_numvfs //disable VFs
|
|
|
|
The parameters for the driver are referenced by position. Thus, if you have a
|
|
dual port adapter, or more than one adapter in your system, and want N virtual
|
|
functions per port, you must specify a number for each port with each parameter
|
|
separated by a comma. For example::
|
|
|
|
modprobe ixgbe max_vfs=4
|
|
|
|
This will spawn 4 VFs on the first port.
|
|
|
|
::
|
|
|
|
modprobe ixgbe max_vfs=2,4
|
|
|
|
This will spawn 2 VFs on the first port and 4 VFs on the second port.
|
|
|
|
NOTE: Caution must be used in loading the driver with these parameters.
|
|
Depending on your system configuration, number of slots, etc., it is impossible
|
|
to predict in all cases where the positions would be on the command line.
|
|
|
|
NOTE: Neither the device nor the driver control how VFs are mapped into config
|
|
space. Bus layout will vary by operating system. On operating systems that
|
|
support it, you can check sysfs to find the mapping.
|
|
|
|
NOTE: When either SR-IOV mode or VMDq mode is enabled, hardware VLAN filtering
|
|
and VLAN tag stripping/insertion will remain enabled. Please remove the old
|
|
VLAN filter before the new VLAN filter is added. For example,
|
|
|
|
::
|
|
|
|
ip link set eth0 vf 0 vlan 100 // set VLAN 100 for VF 0
|
|
ip link set eth0 vf 0 vlan 0 // Delete VLAN 100
|
|
ip link set eth0 vf 0 vlan 200 // set a new VLAN 200 for VF 0
|
|
|
|
With kernel 3.6, the driver supports the simultaneous usage of max_vfs and DCB
|
|
features, subject to the constraints described below. Prior to kernel 3.6, the
|
|
driver did not support the simultaneous operation of max_vfs greater than 0 and
|
|
the DCB features (multiple traffic classes utilizing Priority Flow Control and
|
|
Extended Transmission Selection).
|
|
|
|
When DCB is enabled, network traffic is transmitted and received through
|
|
multiple traffic classes (packet buffers in the NIC). The traffic is associated
|
|
with a specific class based on priority, which has a value of 0 through 7 used
|
|
in the VLAN tag. When SR-IOV is not enabled, each traffic class is associated
|
|
with a set of receive/transmit descriptor queue pairs. The number of queue
|
|
pairs for a given traffic class depends on the hardware configuration. When
|
|
SR-IOV is enabled, the descriptor queue pairs are grouped into pools. The
|
|
Physical Function (PF) and each Virtual Function (VF) is allocated a pool of
|
|
receive/transmit descriptor queue pairs. When multiple traffic classes are
|
|
configured (for example, DCB is enabled), each pool contains a queue pair from
|
|
each traffic class. When a single traffic class is configured in the hardware,
|
|
the pools contain multiple queue pairs from the single traffic class.
|
|
|
|
The number of VFs that can be allocated depends on the number of traffic
|
|
classes that can be enabled. The configurable number of traffic classes for
|
|
each enabled VF is as follows:
|
|
0 - 15 VFs = Up to 8 traffic classes, depending on device support
|
|
16 - 31 VFs = Up to 4 traffic classes
|
|
32 - 63 VFs = 1 traffic class
|
|
|
|
When VFs are configured, the PF is allocated one pool as well. The PF supports
|
|
the DCB features with the constraint that each traffic class will only use a
|
|
single queue pair. When zero VFs are configured, the PF can support multiple
|
|
queue pairs per traffic class.
|
|
|
|
allow_unsupported_sfp
|
|
---------------------
|
|
:Valid Range: 0,1
|
|
:Default Value: 0 (disabled)
|
|
|
|
This parameter allows unsupported and untested SFP+ modules on 82599-based
|
|
adapters, as long as the type of module is known to the driver.
|
|
|
|
debug
|
|
-----
|
|
:Valid Range: 0-16 (0=none,...,16=all)
|
|
:Default Value: 0
|
|
|
|
This parameter adjusts the level of debug messages displayed in the system
|
|
logs.
|
|
|
|
|
|
Additional Features and Configurations
|
|
======================================
|
|
|
|
Flow Control
|
|
------------
|
|
Ethernet Flow Control (IEEE 802.3x) can be configured with ethtool to enable
|
|
receiving and transmitting pause frames for ixgbe. When transmit is enabled,
|
|
pause frames are generated when the receive packet buffer crosses a predefined
|
|
threshold. When receive is enabled, the transmit unit will halt for the time
|
|
delay specified when a pause frame is received.
|
|
|
|
NOTE: You must have a flow control capable link partner.
|
|
|
|
Flow Control is enabled by default.
|
|
|
|
Use ethtool to change the flow control settings. To enable or disable Rx or
|
|
Tx Flow Control::
|
|
|
|
ethtool -A eth? rx <on|off> tx <on|off>
|
|
|
|
Note: This command only enables or disables Flow Control if auto-negotiation is
|
|
disabled. If auto-negotiation is enabled, this command changes the parameters
|
|
used for auto-negotiation with the link partner.
|
|
|
|
To enable or disable auto-negotiation::
|
|
|
|
ethtool -s eth? autoneg <on|off>
|
|
|
|
Note: Flow Control auto-negotiation is part of link auto-negotiation. Depending
|
|
on your device, you may not be able to change the auto-negotiation setting.
|
|
|
|
NOTE: For 82598 backplane cards entering 1 gigabit mode, flow control default
|
|
behavior is changed to off. Flow control in 1 gigabit mode on these devices can
|
|
lead to transmit hangs.
|
|
|
|
Intel(R) Ethernet Flow Director
|
|
-------------------------------
|
|
The Intel Ethernet Flow Director performs the following tasks:
|
|
|
|
- Directs receive packets according to their flows to different queues.
|
|
- Enables tight control on routing a flow in the platform.
|
|
- Matches flows and CPU cores for flow affinity.
|
|
- Supports multiple parameters for flexible flow classification and load
|
|
balancing (in SFP mode only).
|
|
|
|
NOTE: Intel Ethernet Flow Director masking works in the opposite manner from
|
|
subnet masking. In the following command::
|
|
|
|
#ethtool -N eth11 flow-type ip4 src-ip 172.4.1.2 m 255.0.0.0 dst-ip \
|
|
172.21.1.1 m 255.128.0.0 action 31
|
|
|
|
The src-ip value that is written to the filter will be 0.4.1.2, not 172.0.0.0
|
|
as might be expected. Similarly, the dst-ip value written to the filter will be
|
|
0.21.1.1, not 172.0.0.0.
|
|
|
|
To enable or disable the Intel Ethernet Flow Director::
|
|
|
|
# ethtool -K ethX ntuple <on|off>
|
|
|
|
When disabling ntuple filters, all the user programmed filters are flushed from
|
|
the driver cache and hardware. All needed filters must be re-added when ntuple
|
|
is re-enabled.
|
|
|
|
To add a filter that directs packet to queue 2, use -U or -N switch::
|
|
|
|
# ethtool -N ethX flow-type tcp4 src-ip 192.168.10.1 dst-ip \
|
|
192.168.10.2 src-port 2000 dst-port 2001 action 2 [loc 1]
|
|
|
|
To see the list of filters currently present::
|
|
|
|
# ethtool <-u|-n> ethX
|
|
|
|
Sideband Perfect Filters
|
|
------------------------
|
|
Sideband Perfect Filters are used to direct traffic that matches specified
|
|
characteristics. They are enabled through ethtool's ntuple interface. To add a
|
|
new filter use the following command::
|
|
|
|
ethtool -U <device> flow-type <type> src-ip <ip> dst-ip <ip> src-port <port> \
|
|
dst-port <port> action <queue>
|
|
|
|
Where:
|
|
<device> - the ethernet device to program
|
|
<type> - can be ip4, tcp4, udp4, or sctp4
|
|
<ip> - the IP address to match on
|
|
<port> - the port number to match on
|
|
<queue> - the queue to direct traffic towards (-1 discards the matched traffic)
|
|
|
|
Use the following command to delete a filter::
|
|
|
|
ethtool -U <device> delete <N>
|
|
|
|
Where <N> is the filter id displayed when printing all the active filters, and
|
|
may also have been specified using "loc <N>" when adding the filter.
|
|
|
|
The following example matches TCP traffic sent from 192.168.0.1, port 5300,
|
|
directed to 192.168.0.5, port 80, and sends it to queue 7::
|
|
|
|
ethtool -U enp130s0 flow-type tcp4 src-ip 192.168.0.1 dst-ip 192.168.0.5 \
|
|
src-port 5300 dst-port 80 action 7
|
|
|
|
For each flow-type, the programmed filters must all have the same matching
|
|
input set. For example, issuing the following two commands is acceptable::
|
|
|
|
ethtool -U enp130s0 flow-type ip4 src-ip 192.168.0.1 src-port 5300 action 7
|
|
ethtool -U enp130s0 flow-type ip4 src-ip 192.168.0.5 src-port 55 action 10
|
|
|
|
Issuing the next two commands, however, is not acceptable, since the first
|
|
specifies src-ip and the second specifies dst-ip::
|
|
|
|
ethtool -U enp130s0 flow-type ip4 src-ip 192.168.0.1 src-port 5300 action 7
|
|
ethtool -U enp130s0 flow-type ip4 dst-ip 192.168.0.5 src-port 55 action 10
|
|
|
|
The second command will fail with an error. You may program multiple filters
|
|
with the same fields, using different values, but, on one device, you may not
|
|
program two TCP4 filters with different matching fields.
|
|
|
|
Matching on a sub-portion of a field is not supported by the ixgbe driver, thus
|
|
partial mask fields are not supported.
|
|
|
|
To create filters that direct traffic to a specific Virtual Function, use the
|
|
"user-def" parameter. Specify the user-def as a 64 bit value, where the lower 32
|
|
bits represents the queue number, while the next 8 bits represent which VF.
|
|
Note that 0 is the PF, so the VF identifier is offset by 1. For example::
|
|
|
|
... user-def 0x800000002 ...
|
|
|
|
specifies to direct traffic to Virtual Function 7 (8 minus 1) into queue 2 of
|
|
that VF.
|
|
|
|
Note that these filters will not break internal routing rules, and will not
|
|
route traffic that otherwise would not have been sent to the specified Virtual
|
|
Function.
|
|
|
|
Jumbo Frames
|
|
------------
|
|
Jumbo Frames support is enabled by changing the Maximum Transmission Unit (MTU)
|
|
to a value larger than the default value of 1500.
|
|
|
|
Use the ifconfig command to increase the MTU size. For example, enter the
|
|
following where <x> is the interface number::
|
|
|
|
ifconfig eth<x> mtu 9000 up
|
|
|
|
Alternatively, you can use the ip command as follows::
|
|
|
|
ip link set mtu 9000 dev eth<x>
|
|
ip link set up dev eth<x>
|
|
|
|
This setting is not saved across reboots. The setting change can be made
|
|
permanent by adding 'MTU=9000' to the file::
|
|
|
|
/etc/sysconfig/network-scripts/ifcfg-eth<x> // for RHEL
|
|
/etc/sysconfig/network/<config_file> // for SLES
|
|
|
|
NOTE: The maximum MTU setting for Jumbo Frames is 9710. This value coincides
|
|
with the maximum Jumbo Frames size of 9728 bytes.
|
|
|
|
NOTE: This driver will attempt to use multiple page sized buffers to receive
|
|
each jumbo packet. This should help to avoid buffer starvation issues when
|
|
allocating receive packets.
|
|
|
|
NOTE: For 82599-based network connections, if you are enabling jumbo frames in
|
|
a virtual function (VF), jumbo frames must first be enabled in the physical
|
|
function (PF). The VF MTU setting cannot be larger than the PF MTU.
|
|
|
|
Generic Receive Offload, aka GRO
|
|
--------------------------------
|
|
The driver supports the in-kernel software implementation of GRO. GRO has
|
|
shown that by coalescing Rx traffic into larger chunks of data, CPU
|
|
utilization can be significantly reduced when under large Rx load. GRO is an
|
|
evolution of the previously-used LRO interface. GRO is able to coalesce
|
|
other protocols besides TCP. It's also safe to use with configurations that
|
|
are problematic for LRO, namely bridging and iSCSI.
|
|
|
|
Data Center Bridging (DCB)
|
|
--------------------------
|
|
NOTE:
|
|
The kernel assumes that TC0 is available, and will disable Priority Flow
|
|
Control (PFC) on the device if TC0 is not available. To fix this, ensure TC0 is
|
|
enabled when setting up DCB on your switch.
|
|
|
|
DCB is a configuration Quality of Service implementation in hardware. It uses
|
|
the VLAN priority tag (802.1p) to filter traffic. That means that there are 8
|
|
different priorities that traffic can be filtered into. It also enables
|
|
priority flow control (802.1Qbb) which can limit or eliminate the number of
|
|
dropped packets during network stress. Bandwidth can be allocated to each of
|
|
these priorities, which is enforced at the hardware level (802.1Qaz).
|
|
|
|
Adapter firmware implements LLDP and DCBX protocol agents as per 802.1AB and
|
|
802.1Qaz respectively. The firmware based DCBX agent runs in willing mode only
|
|
and can accept settings from a DCBX capable peer. Software configuration of
|
|
DCBX parameters via dcbtool/lldptool are not supported.
|
|
|
|
The ixgbe driver implements the DCB netlink interface layer to allow user-space
|
|
to communicate with the driver and query DCB configuration for the port.
|
|
|
|
ethtool
|
|
-------
|
|
The driver utilizes the ethtool interface for driver configuration and
|
|
diagnostics, as well as displaying statistical information. The latest ethtool
|
|
version is required for this functionality. Download it at:
|
|
https://www.kernel.org/pub/software/network/ethtool/
|
|
|
|
FCoE
|
|
----
|
|
The ixgbe driver supports Fiber Channel over Ethernet (FCoE) and Data Center
|
|
Bridging (DCB). This code has no default effect on the regular driver
|
|
operation. Configuring DCB and FCoE is outside the scope of this README. Refer
|
|
to http://www.open-fcoe.org/ for FCoE project information and contact
|
|
ixgbe-eedc@lists.sourceforge.net for DCB information.
|
|
|
|
MAC and VLAN anti-spoofing feature
|
|
----------------------------------
|
|
When a malicious driver attempts to send a spoofed packet, it is dropped by the
|
|
hardware and not transmitted.
|
|
|
|
An interrupt is sent to the PF driver notifying it of the spoof attempt. When a
|
|
spoofed packet is detected, the PF driver will send the following message to
|
|
the system log (displayed by the "dmesg" command)::
|
|
|
|
ixgbe ethX: ixgbe_spoof_check: n spoofed packets detected
|
|
|
|
where "x" is the PF interface number; and "n" is number of spoofed packets.
|
|
NOTE: This feature can be disabled for a specific Virtual Function (VF)::
|
|
|
|
ip link set <pf dev> vf <vf id> spoofchk {off|on}
|
|
|
|
|
|
Known Issues/Troubleshooting
|
|
============================
|
|
|
|
Enabling SR-IOV in a 64-bit Microsoft* Windows Server* 2012/R2 guest OS
|
|
-----------------------------------------------------------------------
|
|
Linux KVM Hypervisor/VMM supports direct assignment of a PCIe device to a VM.
|
|
This includes traditional PCIe devices, as well as SR-IOV-capable devices based
|
|
on the Intel Ethernet Controller XL710.
|
|
|
|
|
|
Support
|
|
=======
|
|
For general information, go to the Intel support website at:
|
|
|
|
https://www.intel.com/support/
|
|
|
|
or the Intel Wired Networking project hosted by Sourceforge at:
|
|
|
|
https://sourceforge.net/projects/e1000
|
|
|
|
If an issue is identified with the released source code on a supported kernel
|
|
with a supported adapter, email the specific information related to the issue
|
|
to e1000-devel@lists.sf.net.
|