linux/include/dt-bindings/clock/tegra124-car-common.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

347 lines
8.5 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* This header provides constants for binding nvidia,tegra124-car or
* nvidia,tegra132-car.
*
* The first 192 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
* registers. These IDs often match those in the CAR's RST_DEVICES registers,
* but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
* this case, those clocks are assigned IDs above 185 in order to highlight
* this issue. Implementations that interpret these clock IDs as bit values
* within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
* explicitly handle these special cases.
*
* The balance of the clocks controlled by the CAR are assigned IDs of 185 and
* above.
*/
#ifndef _DT_BINDINGS_CLOCK_TEGRA124_CAR_COMMON_H
#define _DT_BINDINGS_CLOCK_TEGRA124_CAR_COMMON_H
/* 0 */
/* 1 */
/* 2 */
#define TEGRA124_CLK_ISPB 3
#define TEGRA124_CLK_RTC 4
#define TEGRA124_CLK_TIMER 5
#define TEGRA124_CLK_UARTA 6
/* 7 (register bit affects uartb and vfir) */
/* 8 */
#define TEGRA124_CLK_SDMMC2 9
/* 10 (register bit affects spdif_in and spdif_out) */
#define TEGRA124_CLK_I2S1 11
#define TEGRA124_CLK_I2C1 12
/* 13 */
#define TEGRA124_CLK_SDMMC1 14
#define TEGRA124_CLK_SDMMC4 15
/* 16 */
#define TEGRA124_CLK_PWM 17
#define TEGRA124_CLK_I2S2 18
/* 20 (register bit affects vi and vi_sensor) */
/* 21 */
#define TEGRA124_CLK_USBD 22
#define TEGRA124_CLK_ISP 23
/* 26 */
/* 25 */
#define TEGRA124_CLK_DISP2 26
#define TEGRA124_CLK_DISP1 27
#define TEGRA124_CLK_HOST1X 28
#define TEGRA124_CLK_VCP 29
#define TEGRA124_CLK_I2S0 30
/* 31 */
#define TEGRA124_CLK_MC 32
/* 33 */
#define TEGRA124_CLK_APBDMA 34
/* 35 */
#define TEGRA124_CLK_KBC 36
/* 37 */
/* 38 */
/* 39 (register bit affects fuse and fuse_burn) */
#define TEGRA124_CLK_KFUSE 40
#define TEGRA124_CLK_SBC1 41
#define TEGRA124_CLK_NOR 42
/* 43 */
#define TEGRA124_CLK_SBC2 44
/* 45 */
#define TEGRA124_CLK_SBC3 46
#define TEGRA124_CLK_I2C5 47
#define TEGRA124_CLK_DSIA 48
/* 49 */
#define TEGRA124_CLK_MIPI 50
#define TEGRA124_CLK_HDMI 51
#define TEGRA124_CLK_CSI 52
/* 53 */
#define TEGRA124_CLK_I2C2 54
#define TEGRA124_CLK_UARTC 55
#define TEGRA124_CLK_MIPI_CAL 56
#define TEGRA124_CLK_EMC 57
#define TEGRA124_CLK_USB2 58
#define TEGRA124_CLK_USB3 59
/* 60 */
#define TEGRA124_CLK_VDE 61
#define TEGRA124_CLK_BSEA 62
#define TEGRA124_CLK_BSEV 63
/* 64 */
#define TEGRA124_CLK_UARTD 65
/* 66 */
#define TEGRA124_CLK_I2C3 67
#define TEGRA124_CLK_SBC4 68
#define TEGRA124_CLK_SDMMC3 69
#define TEGRA124_CLK_PCIE 70
#define TEGRA124_CLK_OWR 71
#define TEGRA124_CLK_AFI 72
#define TEGRA124_CLK_CSITE 73
/* 74 */
/* 75 */
#define TEGRA124_CLK_LA 76
#define TEGRA124_CLK_TRACE 77
#define TEGRA124_CLK_SOC_THERM 78
#define TEGRA124_CLK_DTV 79
/* 80 */
#define TEGRA124_CLK_I2CSLOW 81
#define TEGRA124_CLK_DSIB 82
#define TEGRA124_CLK_TSEC 83
/* 84 */
/* 85 */
/* 86 */
/* 87 */
/* 88 */
#define TEGRA124_CLK_XUSB_HOST 89
/* 90 */
#define TEGRA124_CLK_MSENC 91
#define TEGRA124_CLK_CSUS 92
/* 93 */
/* 94 */
/* 95 (bit affects xusb_dev and xusb_dev_src) */
/* 96 */
/* 97 */
/* 98 */
#define TEGRA124_CLK_MSELECT 99
#define TEGRA124_CLK_TSENSOR 100
#define TEGRA124_CLK_I2S3 101
#define TEGRA124_CLK_I2S4 102
#define TEGRA124_CLK_I2C4 103
#define TEGRA124_CLK_SBC5 104
#define TEGRA124_CLK_SBC6 105
#define TEGRA124_CLK_D_AUDIO 106
#define TEGRA124_CLK_APBIF 107
#define TEGRA124_CLK_DAM0 108
#define TEGRA124_CLK_DAM1 109
#define TEGRA124_CLK_DAM2 110
#define TEGRA124_CLK_HDA2CODEC_2X 111
/* 112 */
#define TEGRA124_CLK_AUDIO0_2X 113
#define TEGRA124_CLK_AUDIO1_2X 114
#define TEGRA124_CLK_AUDIO2_2X 115
#define TEGRA124_CLK_AUDIO3_2X 116
#define TEGRA124_CLK_AUDIO4_2X 117
#define TEGRA124_CLK_SPDIF_2X 118
#define TEGRA124_CLK_ACTMON 119
#define TEGRA124_CLK_EXTERN1 120
#define TEGRA124_CLK_EXTERN2 121
#define TEGRA124_CLK_EXTERN3 122
#define TEGRA124_CLK_SATA_OOB 123
#define TEGRA124_CLK_SATA 124
#define TEGRA124_CLK_HDA 125
/* 126 */
#define TEGRA124_CLK_SE 127
#define TEGRA124_CLK_HDA2HDMI 128
#define TEGRA124_CLK_SATA_COLD 129
/* 130 */
/* 131 */
/* 132 */
/* 133 */
/* 134 */
/* 135 */
#define TEGRA124_CLK_CEC 136
/* 137 */
/* 138 */
/* 139 */
/* 140 */
/* 141 */
/* 142 */
/* 143 (bit affects xusb_falcon_src, xusb_fs_src, */
/* xusb_host_src and xusb_ss_src) */
#define TEGRA124_CLK_CILAB 144
#define TEGRA124_CLK_CILCD 145
#define TEGRA124_CLK_CILE 146
#define TEGRA124_CLK_DSIALP 147
#define TEGRA124_CLK_DSIBLP 148
#define TEGRA124_CLK_ENTROPY 149
#define TEGRA124_CLK_DDS 150
/* 151 */
#define TEGRA124_CLK_DP2 152
#define TEGRA124_CLK_AMX 153
#define TEGRA124_CLK_ADX 154
/* 155 (bit affects dfll_ref and dfll_soc) */
#define TEGRA124_CLK_XUSB_SS 156
/* 157 */
/* 158 */
/* 159 */
/* 160 */
/* 161 */
/* 162 */
/* 163 */
/* 164 */
/* 165 */
#define TEGRA124_CLK_I2C6 166
/* 167 */
/* 168 */
/* 169 */
/* 170 */
#define TEGRA124_CLK_VIM2_CLK 171
/* 172 */
/* 173 */
/* 174 */
/* 175 */
#define TEGRA124_CLK_HDMI_AUDIO 176
#define TEGRA124_CLK_CLK72MHZ 177
#define TEGRA124_CLK_VIC03 178
/* 179 */
#define TEGRA124_CLK_ADX1 180
#define TEGRA124_CLK_DPAUX 181
#define TEGRA124_CLK_SOR0 182
/* 183 */
#define TEGRA124_CLK_GPU 184
#define TEGRA124_CLK_AMX1 185
/* 186 */
/* 187 */
/* 188 */
/* 189 */
/* 190 */
/* 191 */
#define TEGRA124_CLK_UARTB 192
#define TEGRA124_CLK_VFIR 193
#define TEGRA124_CLK_SPDIF_IN 194
#define TEGRA124_CLK_SPDIF_OUT 195
#define TEGRA124_CLK_VI 196
#define TEGRA124_CLK_VI_SENSOR 197
#define TEGRA124_CLK_FUSE 198
#define TEGRA124_CLK_FUSE_BURN 199
#define TEGRA124_CLK_CLK_32K 200
#define TEGRA124_CLK_CLK_M 201
#define TEGRA124_CLK_CLK_M_DIV2 202
#define TEGRA124_CLK_CLK_M_DIV4 203
#define TEGRA124_CLK_PLL_REF 204
#define TEGRA124_CLK_PLL_C 205
#define TEGRA124_CLK_PLL_C_OUT1 206
#define TEGRA124_CLK_PLL_C2 207
#define TEGRA124_CLK_PLL_C3 208
#define TEGRA124_CLK_PLL_M 209
#define TEGRA124_CLK_PLL_M_OUT1 210
#define TEGRA124_CLK_PLL_P 211
#define TEGRA124_CLK_PLL_P_OUT1 212
#define TEGRA124_CLK_PLL_P_OUT2 213
#define TEGRA124_CLK_PLL_P_OUT3 214
#define TEGRA124_CLK_PLL_P_OUT4 215
#define TEGRA124_CLK_PLL_A 216
#define TEGRA124_CLK_PLL_A_OUT0 217
#define TEGRA124_CLK_PLL_D 218
#define TEGRA124_CLK_PLL_D_OUT0 219
#define TEGRA124_CLK_PLL_D2 220
#define TEGRA124_CLK_PLL_D2_OUT0 221
#define TEGRA124_CLK_PLL_U 222
#define TEGRA124_CLK_PLL_U_480M 223
#define TEGRA124_CLK_PLL_U_60M 224
#define TEGRA124_CLK_PLL_U_48M 225
#define TEGRA124_CLK_PLL_U_12M 226
/* 227 */
/* 228 */
#define TEGRA124_CLK_PLL_RE_VCO 229
#define TEGRA124_CLK_PLL_RE_OUT 230
#define TEGRA124_CLK_PLL_E 231
#define TEGRA124_CLK_SPDIF_IN_SYNC 232
#define TEGRA124_CLK_I2S0_SYNC 233
#define TEGRA124_CLK_I2S1_SYNC 234
#define TEGRA124_CLK_I2S2_SYNC 235
#define TEGRA124_CLK_I2S3_SYNC 236
#define TEGRA124_CLK_I2S4_SYNC 237
#define TEGRA124_CLK_VIMCLK_SYNC 238
#define TEGRA124_CLK_AUDIO0 239
#define TEGRA124_CLK_AUDIO1 240
#define TEGRA124_CLK_AUDIO2 241
#define TEGRA124_CLK_AUDIO3 242
#define TEGRA124_CLK_AUDIO4 243
#define TEGRA124_CLK_SPDIF 244
#define TEGRA124_CLK_CLK_OUT_1 245
#define TEGRA124_CLK_CLK_OUT_2 246
#define TEGRA124_CLK_CLK_OUT_3 247
#define TEGRA124_CLK_BLINK 248
/* 249 */
/* 250 */
/* 251 */
#define TEGRA124_CLK_XUSB_HOST_SRC 252
#define TEGRA124_CLK_XUSB_FALCON_SRC 253
#define TEGRA124_CLK_XUSB_FS_SRC 254
#define TEGRA124_CLK_XUSB_SS_SRC 255
#define TEGRA124_CLK_XUSB_DEV_SRC 256
#define TEGRA124_CLK_XUSB_DEV 257
#define TEGRA124_CLK_XUSB_HS_SRC 258
#define TEGRA124_CLK_SCLK 259
#define TEGRA124_CLK_HCLK 260
#define TEGRA124_CLK_PCLK 261
/* 262 */
/* 263 */
#define TEGRA124_CLK_DFLL_REF 264
#define TEGRA124_CLK_DFLL_SOC 265
#define TEGRA124_CLK_VI_SENSOR2 266
#define TEGRA124_CLK_PLL_P_OUT5 267
#define TEGRA124_CLK_CML0 268
#define TEGRA124_CLK_CML1 269
#define TEGRA124_CLK_PLL_C4 270
#define TEGRA124_CLK_PLL_DP 271
#define TEGRA124_CLK_PLL_E_MUX 272
#define TEGRA124_CLK_PLL_D_DSI_OUT 273
/* 274 */
/* 275 */
/* 276 */
/* 277 */
/* 278 */
/* 279 */
/* 280 */
/* 281 */
/* 282 */
/* 283 */
/* 284 */
/* 285 */
/* 286 */
/* 287 */
/* 288 */
/* 289 */
/* 290 */
/* 291 */
/* 292 */
/* 293 */
/* 294 */
/* 295 */
/* 296 */
/* 297 */
/* 298 */
/* 299 */
#define TEGRA124_CLK_AUDIO0_MUX 300
#define TEGRA124_CLK_AUDIO1_MUX 301
#define TEGRA124_CLK_AUDIO2_MUX 302
#define TEGRA124_CLK_AUDIO3_MUX 303
#define TEGRA124_CLK_AUDIO4_MUX 304
#define TEGRA124_CLK_SPDIF_MUX 305
#define TEGRA124_CLK_CLK_OUT_1_MUX 306
#define TEGRA124_CLK_CLK_OUT_2_MUX 307
#define TEGRA124_CLK_CLK_OUT_3_MUX 308
/* 309 */
/* 310 */
#define TEGRA124_CLK_SOR0_LVDS 311
#define TEGRA124_CLK_XUSB_SS_DIV2 312
#define TEGRA124_CLK_PLL_M_UD 313
#define TEGRA124_CLK_PLL_C_UD 314
#endif /* _DT_BINDINGS_CLOCK_TEGRA124_CAR_COMMON_H */