mirror of
https://github.com/torvalds/linux.git
synced 2024-12-11 05:33:09 +00:00
f50a7f3d92
Based on 1 normalized pattern(s): licensed under gplv2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 99 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170027.163048684@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
415 lines
10 KiB
C
415 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Driver for Allwinner sun4i Pulse Width Modulation Controller
|
|
*
|
|
* Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/time.h>
|
|
|
|
#define PWM_CTRL_REG 0x0
|
|
|
|
#define PWM_CH_PRD_BASE 0x4
|
|
#define PWM_CH_PRD_OFFSET 0x4
|
|
#define PWM_CH_PRD(ch) (PWM_CH_PRD_BASE + PWM_CH_PRD_OFFSET * (ch))
|
|
|
|
#define PWMCH_OFFSET 15
|
|
#define PWM_PRESCAL_MASK GENMASK(3, 0)
|
|
#define PWM_PRESCAL_OFF 0
|
|
#define PWM_EN BIT(4)
|
|
#define PWM_ACT_STATE BIT(5)
|
|
#define PWM_CLK_GATING BIT(6)
|
|
#define PWM_MODE BIT(7)
|
|
#define PWM_PULSE BIT(8)
|
|
#define PWM_BYPASS BIT(9)
|
|
|
|
#define PWM_RDY_BASE 28
|
|
#define PWM_RDY_OFFSET 1
|
|
#define PWM_RDY(ch) BIT(PWM_RDY_BASE + PWM_RDY_OFFSET * (ch))
|
|
|
|
#define PWM_PRD(prd) (((prd) - 1) << 16)
|
|
#define PWM_PRD_MASK GENMASK(15, 0)
|
|
|
|
#define PWM_DTY_MASK GENMASK(15, 0)
|
|
|
|
#define PWM_REG_PRD(reg) ((((reg) >> 16) & PWM_PRD_MASK) + 1)
|
|
#define PWM_REG_DTY(reg) ((reg) & PWM_DTY_MASK)
|
|
#define PWM_REG_PRESCAL(reg, chan) (((reg) >> ((chan) * PWMCH_OFFSET)) & PWM_PRESCAL_MASK)
|
|
|
|
#define BIT_CH(bit, chan) ((bit) << ((chan) * PWMCH_OFFSET))
|
|
|
|
static const u32 prescaler_table[] = {
|
|
120,
|
|
180,
|
|
240,
|
|
360,
|
|
480,
|
|
0,
|
|
0,
|
|
0,
|
|
12000,
|
|
24000,
|
|
36000,
|
|
48000,
|
|
72000,
|
|
0,
|
|
0,
|
|
0, /* Actually 1 but tested separately */
|
|
};
|
|
|
|
struct sun4i_pwm_data {
|
|
bool has_prescaler_bypass;
|
|
unsigned int npwm;
|
|
};
|
|
|
|
struct sun4i_pwm_chip {
|
|
struct pwm_chip chip;
|
|
struct clk *clk;
|
|
void __iomem *base;
|
|
spinlock_t ctrl_lock;
|
|
const struct sun4i_pwm_data *data;
|
|
unsigned long next_period[2];
|
|
bool needs_delay[2];
|
|
};
|
|
|
|
static inline struct sun4i_pwm_chip *to_sun4i_pwm_chip(struct pwm_chip *chip)
|
|
{
|
|
return container_of(chip, struct sun4i_pwm_chip, chip);
|
|
}
|
|
|
|
static inline u32 sun4i_pwm_readl(struct sun4i_pwm_chip *chip,
|
|
unsigned long offset)
|
|
{
|
|
return readl(chip->base + offset);
|
|
}
|
|
|
|
static inline void sun4i_pwm_writel(struct sun4i_pwm_chip *chip,
|
|
u32 val, unsigned long offset)
|
|
{
|
|
writel(val, chip->base + offset);
|
|
}
|
|
|
|
static void sun4i_pwm_get_state(struct pwm_chip *chip,
|
|
struct pwm_device *pwm,
|
|
struct pwm_state *state)
|
|
{
|
|
struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
|
|
u64 clk_rate, tmp;
|
|
u32 val;
|
|
unsigned int prescaler;
|
|
|
|
clk_rate = clk_get_rate(sun4i_pwm->clk);
|
|
|
|
val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
|
|
|
|
if ((PWM_REG_PRESCAL(val, pwm->hwpwm) == PWM_PRESCAL_MASK) &&
|
|
sun4i_pwm->data->has_prescaler_bypass)
|
|
prescaler = 1;
|
|
else
|
|
prescaler = prescaler_table[PWM_REG_PRESCAL(val, pwm->hwpwm)];
|
|
|
|
if (prescaler == 0)
|
|
return;
|
|
|
|
if (val & BIT_CH(PWM_ACT_STATE, pwm->hwpwm))
|
|
state->polarity = PWM_POLARITY_NORMAL;
|
|
else
|
|
state->polarity = PWM_POLARITY_INVERSED;
|
|
|
|
if ((val & BIT_CH(PWM_CLK_GATING | PWM_EN, pwm->hwpwm)) ==
|
|
BIT_CH(PWM_CLK_GATING | PWM_EN, pwm->hwpwm))
|
|
state->enabled = true;
|
|
else
|
|
state->enabled = false;
|
|
|
|
val = sun4i_pwm_readl(sun4i_pwm, PWM_CH_PRD(pwm->hwpwm));
|
|
|
|
tmp = prescaler * NSEC_PER_SEC * PWM_REG_DTY(val);
|
|
state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
|
|
|
|
tmp = prescaler * NSEC_PER_SEC * PWM_REG_PRD(val);
|
|
state->period = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
|
|
}
|
|
|
|
static int sun4i_pwm_calculate(struct sun4i_pwm_chip *sun4i_pwm,
|
|
struct pwm_state *state,
|
|
u32 *dty, u32 *prd, unsigned int *prsclr)
|
|
{
|
|
u64 clk_rate, div = 0;
|
|
unsigned int pval, prescaler = 0;
|
|
|
|
clk_rate = clk_get_rate(sun4i_pwm->clk);
|
|
|
|
if (sun4i_pwm->data->has_prescaler_bypass) {
|
|
/* First, test without any prescaler when available */
|
|
prescaler = PWM_PRESCAL_MASK;
|
|
pval = 1;
|
|
/*
|
|
* When not using any prescaler, the clock period in nanoseconds
|
|
* is not an integer so round it half up instead of
|
|
* truncating to get less surprising values.
|
|
*/
|
|
div = clk_rate * state->period + NSEC_PER_SEC / 2;
|
|
do_div(div, NSEC_PER_SEC);
|
|
if (div - 1 > PWM_PRD_MASK)
|
|
prescaler = 0;
|
|
}
|
|
|
|
if (prescaler == 0) {
|
|
/* Go up from the first divider */
|
|
for (prescaler = 0; prescaler < PWM_PRESCAL_MASK; prescaler++) {
|
|
if (!prescaler_table[prescaler])
|
|
continue;
|
|
pval = prescaler_table[prescaler];
|
|
div = clk_rate;
|
|
do_div(div, pval);
|
|
div = div * state->period;
|
|
do_div(div, NSEC_PER_SEC);
|
|
if (div - 1 <= PWM_PRD_MASK)
|
|
break;
|
|
}
|
|
|
|
if (div - 1 > PWM_PRD_MASK)
|
|
return -EINVAL;
|
|
}
|
|
|
|
*prd = div;
|
|
div *= state->duty_cycle;
|
|
do_div(div, state->period);
|
|
*dty = div;
|
|
*prsclr = prescaler;
|
|
|
|
div = (u64)pval * NSEC_PER_SEC * *prd;
|
|
state->period = DIV_ROUND_CLOSEST_ULL(div, clk_rate);
|
|
|
|
div = (u64)pval * NSEC_PER_SEC * *dty;
|
|
state->duty_cycle = DIV_ROUND_CLOSEST_ULL(div, clk_rate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
struct pwm_state *state)
|
|
{
|
|
struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
|
|
struct pwm_state cstate;
|
|
u32 ctrl;
|
|
int ret;
|
|
unsigned int delay_us;
|
|
unsigned long now;
|
|
|
|
pwm_get_state(pwm, &cstate);
|
|
|
|
if (!cstate.enabled) {
|
|
ret = clk_prepare_enable(sun4i_pwm->clk);
|
|
if (ret) {
|
|
dev_err(chip->dev, "failed to enable PWM clock\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
spin_lock(&sun4i_pwm->ctrl_lock);
|
|
ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
|
|
|
|
if ((cstate.period != state->period) ||
|
|
(cstate.duty_cycle != state->duty_cycle)) {
|
|
u32 period, duty, val;
|
|
unsigned int prescaler;
|
|
|
|
ret = sun4i_pwm_calculate(sun4i_pwm, state,
|
|
&duty, &period, &prescaler);
|
|
if (ret) {
|
|
dev_err(chip->dev, "period exceeds the maximum value\n");
|
|
spin_unlock(&sun4i_pwm->ctrl_lock);
|
|
if (!cstate.enabled)
|
|
clk_disable_unprepare(sun4i_pwm->clk);
|
|
return ret;
|
|
}
|
|
|
|
if (PWM_REG_PRESCAL(ctrl, pwm->hwpwm) != prescaler) {
|
|
/* Prescaler changed, the clock has to be gated */
|
|
ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
|
|
sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
|
|
|
|
ctrl &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm);
|
|
ctrl |= BIT_CH(prescaler, pwm->hwpwm);
|
|
}
|
|
|
|
val = (duty & PWM_DTY_MASK) | PWM_PRD(period);
|
|
sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm));
|
|
sun4i_pwm->next_period[pwm->hwpwm] = jiffies +
|
|
usecs_to_jiffies(cstate.period / 1000 + 1);
|
|
sun4i_pwm->needs_delay[pwm->hwpwm] = true;
|
|
}
|
|
|
|
if (state->polarity != PWM_POLARITY_NORMAL)
|
|
ctrl &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
|
|
else
|
|
ctrl |= BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
|
|
|
|
ctrl |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
|
|
if (state->enabled) {
|
|
ctrl |= BIT_CH(PWM_EN, pwm->hwpwm);
|
|
} else if (!sun4i_pwm->needs_delay[pwm->hwpwm]) {
|
|
ctrl &= ~BIT_CH(PWM_EN, pwm->hwpwm);
|
|
ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
|
|
}
|
|
|
|
sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
|
|
|
|
spin_unlock(&sun4i_pwm->ctrl_lock);
|
|
|
|
if (state->enabled)
|
|
return 0;
|
|
|
|
if (!sun4i_pwm->needs_delay[pwm->hwpwm]) {
|
|
clk_disable_unprepare(sun4i_pwm->clk);
|
|
return 0;
|
|
}
|
|
|
|
/* We need a full period to elapse before disabling the channel. */
|
|
now = jiffies;
|
|
if (sun4i_pwm->needs_delay[pwm->hwpwm] &&
|
|
time_before(now, sun4i_pwm->next_period[pwm->hwpwm])) {
|
|
delay_us = jiffies_to_usecs(sun4i_pwm->next_period[pwm->hwpwm] -
|
|
now);
|
|
if ((delay_us / 500) > MAX_UDELAY_MS)
|
|
msleep(delay_us / 1000 + 1);
|
|
else
|
|
usleep_range(delay_us, delay_us * 2);
|
|
}
|
|
sun4i_pwm->needs_delay[pwm->hwpwm] = false;
|
|
|
|
spin_lock(&sun4i_pwm->ctrl_lock);
|
|
ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
|
|
ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
|
|
ctrl &= ~BIT_CH(PWM_EN, pwm->hwpwm);
|
|
sun4i_pwm_writel(sun4i_pwm, ctrl, PWM_CTRL_REG);
|
|
spin_unlock(&sun4i_pwm->ctrl_lock);
|
|
|
|
clk_disable_unprepare(sun4i_pwm->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pwm_ops sun4i_pwm_ops = {
|
|
.apply = sun4i_pwm_apply,
|
|
.get_state = sun4i_pwm_get_state,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct sun4i_pwm_data sun4i_pwm_dual_nobypass = {
|
|
.has_prescaler_bypass = false,
|
|
.npwm = 2,
|
|
};
|
|
|
|
static const struct sun4i_pwm_data sun4i_pwm_dual_bypass = {
|
|
.has_prescaler_bypass = true,
|
|
.npwm = 2,
|
|
};
|
|
|
|
static const struct sun4i_pwm_data sun4i_pwm_single_bypass = {
|
|
.has_prescaler_bypass = true,
|
|
.npwm = 1,
|
|
};
|
|
|
|
static const struct of_device_id sun4i_pwm_dt_ids[] = {
|
|
{
|
|
.compatible = "allwinner,sun4i-a10-pwm",
|
|
.data = &sun4i_pwm_dual_nobypass,
|
|
}, {
|
|
.compatible = "allwinner,sun5i-a10s-pwm",
|
|
.data = &sun4i_pwm_dual_bypass,
|
|
}, {
|
|
.compatible = "allwinner,sun5i-a13-pwm",
|
|
.data = &sun4i_pwm_single_bypass,
|
|
}, {
|
|
.compatible = "allwinner,sun7i-a20-pwm",
|
|
.data = &sun4i_pwm_dual_bypass,
|
|
}, {
|
|
.compatible = "allwinner,sun8i-h3-pwm",
|
|
.data = &sun4i_pwm_single_bypass,
|
|
}, {
|
|
/* sentinel */
|
|
},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sun4i_pwm_dt_ids);
|
|
|
|
static int sun4i_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
struct sun4i_pwm_chip *pwm;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
|
|
if (!pwm)
|
|
return -ENOMEM;
|
|
|
|
pwm->data = of_device_get_match_data(&pdev->dev);
|
|
if (!pwm->data)
|
|
return -ENODEV;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
pwm->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(pwm->base))
|
|
return PTR_ERR(pwm->base);
|
|
|
|
pwm->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(pwm->clk))
|
|
return PTR_ERR(pwm->clk);
|
|
|
|
pwm->chip.dev = &pdev->dev;
|
|
pwm->chip.ops = &sun4i_pwm_ops;
|
|
pwm->chip.base = -1;
|
|
pwm->chip.npwm = pwm->data->npwm;
|
|
pwm->chip.of_xlate = of_pwm_xlate_with_flags;
|
|
pwm->chip.of_pwm_n_cells = 3;
|
|
|
|
spin_lock_init(&pwm->ctrl_lock);
|
|
|
|
ret = pwmchip_add(&pwm->chip);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, pwm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sun4i_pwm_remove(struct platform_device *pdev)
|
|
{
|
|
struct sun4i_pwm_chip *pwm = platform_get_drvdata(pdev);
|
|
|
|
return pwmchip_remove(&pwm->chip);
|
|
}
|
|
|
|
static struct platform_driver sun4i_pwm_driver = {
|
|
.driver = {
|
|
.name = "sun4i-pwm",
|
|
.of_match_table = sun4i_pwm_dt_ids,
|
|
},
|
|
.probe = sun4i_pwm_probe,
|
|
.remove = sun4i_pwm_remove,
|
|
};
|
|
module_platform_driver(sun4i_pwm_driver);
|
|
|
|
MODULE_ALIAS("platform:sun4i-pwm");
|
|
MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>");
|
|
MODULE_DESCRIPTION("Allwinner sun4i PWM driver");
|
|
MODULE_LICENSE("GPL v2");
|