Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-27 13:22:23 +00:00
Code Issues Packages Projects Releases Wiki Activity
1c1ed4731c
linux/arch/x86/ia32/ia32_signal.c
Linus Torvalds 96d4f267e4 Remove 'type' argument from access_ok() function 
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.

It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access.  But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.

A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model.  And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.

This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.

There were a couple of notable cases:

 - csky still had the old "verify_area()" name as an alias.

 - the iter_iov code had magical hardcoded knowledge of the actual
   values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
   really used it)

 - microblaze used the type argument for a debug printout

but other than those oddities this should be a total no-op patch.

I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something.  Any missed conversion should be trivially fixable, though.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 18:57:57 -08:00

407 lines
10 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* linux/arch/x86_64/ia32/ia32_signal.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
* 2000-06-20 Pentium III FXSR, SSE support by Gareth Hughes
* 2000-12-* x86-64 compatibility mode signal handling by Andi Kleen
*/
#include <linux/sched.h>
#include <linux/sched/task_stack.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/wait.h>
#include <linux/unistd.h>
#include <linux/stddef.h>
#include <linux/personality.h>
#include <linux/compat.h>
#include <linux/binfmts.h>
#include <asm/ucontext.h>
#include <linux/uaccess.h>
#include <asm/fpu/internal.h>
#include <asm/fpu/signal.h>
#include <asm/ptrace.h>
#include <asm/ia32_unistd.h>
#include <asm/user32.h>
#include <uapi/asm/sigcontext.h>
#include <asm/proto.h>
#include <asm/vdso.h>
#include <asm/sigframe.h>
#include <asm/sighandling.h>
#include <asm/smap.h>
/*
* Do a signal return; undo the signal stack.
*/
#define loadsegment_gs(v) load_gs_index(v)
#define loadsegment_fs(v) loadsegment(fs, v)
#define loadsegment_ds(v) loadsegment(ds, v)
#define loadsegment_es(v) loadsegment(es, v)
#define get_user_seg(seg) ({ unsigned int v; savesegment(seg, v); v; })
#define set_user_seg(seg, v) loadsegment_##seg(v)
#define COPY(x) { \
get_user_ex(regs->x, &sc->x); \
}
#define GET_SEG(seg) ({ \
unsigned short tmp; \
get_user_ex(tmp, &sc->seg); \
tmp; \
})
#define COPY_SEG_CPL3(seg) do { \
regs->seg = GET_SEG(seg) | 3; \
} while (0)
#define RELOAD_SEG(seg) { \
unsigned int pre = GET_SEG(seg); \
unsigned int cur = get_user_seg(seg); \
pre |= 3; \
if (pre != cur) \
set_user_seg(seg, pre); \
}
static int ia32_restore_sigcontext(struct pt_regs *regs,
struct sigcontext_32 __user *sc)
{
unsigned int tmpflags, err = 0;
void __user *buf;
u32 tmp;
/* Always make any pending restarted system calls return -EINTR */
current->restart_block.fn = do_no_restart_syscall;
get_user_try {
/*
* Reload fs and gs if they have changed in the signal
* handler. This does not handle long fs/gs base changes in
* the handler, but does not clobber them at least in the
* normal case.
*/
RELOAD_SEG(gs);
RELOAD_SEG(fs);
RELOAD_SEG(ds);
RELOAD_SEG(es);
COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx);
COPY(dx); COPY(cx); COPY(ip); COPY(ax);
/* Don't touch extended registers */
COPY_SEG_CPL3(cs);
COPY_SEG_CPL3(ss);
get_user_ex(tmpflags, &sc->flags);
regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
/* disable syscall checks */
regs->orig_ax = -1;
get_user_ex(tmp, &sc->fpstate);
buf = compat_ptr(tmp);
} get_user_catch(err);
err |= fpu__restore_sig(buf, 1);
force_iret();
return err;
}
asmlinkage long sys32_sigreturn(void)
{
struct pt_regs *regs = current_pt_regs();
struct sigframe_ia32 __user *frame = (struct sigframe_ia32 __user *)(regs->sp-8);
sigset_t set;
if (!access_ok(frame, sizeof(*frame)))
goto badframe;
if (__get_user(set.sig[0], &frame->sc.oldmask)
|| (_COMPAT_NSIG_WORDS > 1
&& __copy_from_user((((char *) &set.sig) + 4),
&frame->extramask,
sizeof(frame->extramask))))
goto badframe;
set_current_blocked(&set);
if (ia32_restore_sigcontext(regs, &frame->sc))
goto badframe;
return regs->ax;
badframe:
signal_fault(regs, frame, "32bit sigreturn");
return 0;
}
asmlinkage long sys32_rt_sigreturn(void)
{
struct pt_regs *regs = current_pt_regs();
struct rt_sigframe_ia32 __user *frame;
sigset_t set;
frame = (struct rt_sigframe_ia32 __user *)(regs->sp - 4);
if (!access_ok(frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
goto badframe;
set_current_blocked(&set);
if (ia32_restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe;
if (compat_restore_altstack(&frame->uc.uc_stack))
goto badframe;
return regs->ax;
badframe:
signal_fault(regs, frame, "32bit rt sigreturn");
return 0;
}
/*
* Set up a signal frame.
*/
static int ia32_setup_sigcontext(struct sigcontext_32 __user *sc,
void __user *fpstate,
struct pt_regs *regs, unsigned int mask)
{
int err = 0;
put_user_try {
put_user_ex(get_user_seg(gs), (unsigned int __user *)&sc->gs);
put_user_ex(get_user_seg(fs), (unsigned int __user *)&sc->fs);
put_user_ex(get_user_seg(ds), (unsigned int __user *)&sc->ds);
put_user_ex(get_user_seg(es), (unsigned int __user *)&sc->es);
put_user_ex(regs->di, &sc->di);
put_user_ex(regs->si, &sc->si);
put_user_ex(regs->bp, &sc->bp);
put_user_ex(regs->sp, &sc->sp);
put_user_ex(regs->bx, &sc->bx);
put_user_ex(regs->dx, &sc->dx);
put_user_ex(regs->cx, &sc->cx);
put_user_ex(regs->ax, &sc->ax);
put_user_ex(current->thread.trap_nr, &sc->trapno);
put_user_ex(current->thread.error_code, &sc->err);
put_user_ex(regs->ip, &sc->ip);
put_user_ex(regs->cs, (unsigned int __user *)&sc->cs);
put_user_ex(regs->flags, &sc->flags);
put_user_ex(regs->sp, &sc->sp_at_signal);
put_user_ex(regs->ss, (unsigned int __user *)&sc->ss);
put_user_ex(ptr_to_compat(fpstate), &sc->fpstate);
/* non-iBCS2 extensions.. */
put_user_ex(mask, &sc->oldmask);
put_user_ex(current->thread.cr2, &sc->cr2);
} put_user_catch(err);
return err;
}
/*
* Determine which stack to use..
*/
static void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
size_t frame_size,
void __user **fpstate)
{
struct fpu *fpu = &current->thread.fpu;
unsigned long sp;
/* Default to using normal stack */
sp = regs->sp;
/* This is the X/Open sanctioned signal stack switching. */
if (ksig->ka.sa.sa_flags & SA_ONSTACK)
sp = sigsp(sp, ksig);
/* This is the legacy signal stack switching. */
else if (regs->ss != __USER32_DS &&
!(ksig->ka.sa.sa_flags & SA_RESTORER) &&
ksig->ka.sa.sa_restorer)
sp = (unsigned long) ksig->ka.sa.sa_restorer;
if (fpu->initialized) {
unsigned long fx_aligned, math_size;
sp = fpu__alloc_mathframe(sp, 1, &fx_aligned, &math_size);
*fpstate = (struct _fpstate_32 __user *) sp;
if (copy_fpstate_to_sigframe(*fpstate, (void __user *)fx_aligned,
math_size) < 0)
return (void __user *) -1L;
}
sp -= frame_size;
/* Align the stack pointer according to the i386 ABI,
* i.e. so that on function entry ((sp + 4) & 15) == 0. */
sp = ((sp + 4) & -16ul) - 4;
return (void __user *) sp;
}
int ia32_setup_frame(int sig, struct ksignal *ksig,
compat_sigset_t *set, struct pt_regs *regs)
{
struct sigframe_ia32 __user *frame;
void __user *restorer;
int err = 0;
void __user *fpstate = NULL;
/* copy_to_user optimizes that into a single 8 byte store */
static const struct {
u16 poplmovl;
u32 val;
u16 int80;
} __attribute__((packed)) code = {
0xb858, /* popl %eax ; movl $...,%eax */
__NR_ia32_sigreturn,
0x80cd, /* int $0x80 */
};
frame = get_sigframe(ksig, regs, sizeof(*frame), &fpstate);
if (!access_ok(frame, sizeof(*frame)))
return -EFAULT;
if (__put_user(sig, &frame->sig))
return -EFAULT;
if (ia32_setup_sigcontext(&frame->sc, fpstate, regs, set->sig[0]))
return -EFAULT;
if (_COMPAT_NSIG_WORDS > 1) {
if (__copy_to_user(frame->extramask, &set->sig[1],
sizeof(frame->extramask)))
return -EFAULT;
}
if (ksig->ka.sa.sa_flags & SA_RESTORER) {
restorer = ksig->ka.sa.sa_restorer;
} else {
/* Return stub is in 32bit vsyscall page */
if (current->mm->context.vdso)
restorer = current->mm->context.vdso +
vdso_image_32.sym___kernel_sigreturn;
else
restorer = &frame->retcode;
}
put_user_try {
put_user_ex(ptr_to_compat(restorer), &frame->pretcode);
/*
* These are actually not used anymore, but left because some
* gdb versions depend on them as a marker.
*/
put_user_ex(*((u64 *)&code), (u64 __user *)frame->retcode);
} put_user_catch(err);
if (err)
return -EFAULT;
/* Set up registers for signal handler */
regs->sp = (unsigned long) frame;
regs->ip = (unsigned long) ksig->ka.sa.sa_handler;
/* Make -mregparm=3 work */
regs->ax = sig;
regs->dx = 0;
regs->cx = 0;
loadsegment(ds, __USER32_DS);
loadsegment(es, __USER32_DS);
regs->cs = __USER32_CS;
regs->ss = __USER32_DS;
return 0;
}
int ia32_setup_rt_frame(int sig, struct ksignal *ksig,
compat_sigset_t *set, struct pt_regs *regs)
{
struct rt_sigframe_ia32 __user *frame;
void __user *restorer;
int err = 0;
void __user *fpstate = NULL;
/* __copy_to_user optimizes that into a single 8 byte store */
static const struct {
u8 movl;
u32 val;
u16 int80;
u8 pad;
} __attribute__((packed)) code = {
0xb8,
__NR_ia32_rt_sigreturn,
0x80cd,
0,
};
frame = get_sigframe(ksig, regs, sizeof(*frame), &fpstate);
if (!access_ok(frame, sizeof(*frame)))
return -EFAULT;
put_user_try {
put_user_ex(sig, &frame->sig);
put_user_ex(ptr_to_compat(&frame->info), &frame->pinfo);
put_user_ex(ptr_to_compat(&frame->uc), &frame->puc);
/* Create the ucontext. */
if (boot_cpu_has(X86_FEATURE_XSAVE))
put_user_ex(UC_FP_XSTATE, &frame->uc.uc_flags);
else
put_user_ex(0, &frame->uc.uc_flags);
put_user_ex(0, &frame->uc.uc_link);
compat_save_altstack_ex(&frame->uc.uc_stack, regs->sp);
if (ksig->ka.sa.sa_flags & SA_RESTORER)
restorer = ksig->ka.sa.sa_restorer;
else
restorer = current->mm->context.vdso +
vdso_image_32.sym___kernel_rt_sigreturn;
put_user_ex(ptr_to_compat(restorer), &frame->pretcode);
/*
* Not actually used anymore, but left because some gdb
* versions need it.
*/
put_user_ex(*((u64 *)&code), (u64 __user *)frame->retcode);
} put_user_catch(err);
err |= __copy_siginfo_to_user32(&frame->info, &ksig->info, false);
err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, fpstate,
regs, set->sig[0]);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
return -EFAULT;
/* Set up registers for signal handler */
regs->sp = (unsigned long) frame;
regs->ip = (unsigned long) ksig->ka.sa.sa_handler;
/* Make -mregparm=3 work */
regs->ax = sig;
regs->dx = (unsigned long) &frame->info;
regs->cx = (unsigned long) &frame->uc;
loadsegment(ds, __USER32_DS);
loadsegment(es, __USER32_DS);
regs->cs = __USER32_CS;
regs->ss = __USER32_DS;
return 0;
}
Reference in New Issue View Git Blame Copy Permalink