mirror of
https://github.com/torvalds/linux.git
synced 2024-12-27 13:22:23 +00:00
b4b50fd78b
This branch contains mostly additions and changes to platform enablement
and SoC-level drivers. Since there's sometimes a dependency on device-tree
changes, there's also a fair amount of those in this branch.
Pieces worth mentioning are:
- Mbus driver for Marvell platforms, allowing kernel configuration
and resource allocation of on-chip peripherals.
- Enablement of the mbus infrastructure from Marvell PCI-e drivers.
- Preparation of MSI support for Marvell platforms.
- Addition of new PCI-e host controller driver for Tegra platforms
- Some churn caused by sharing of macro names between i.MX 6Q and 6DL
platforms in the device tree sources and header files.
- Various suspend/PM updates for Tegra, including LP1 support.
- Versatile Express support for MCPM, part of big little support.
- Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7)
- OMAP2+ support for DRA7, a new Cortex-A15-based SoC.
The code that touches other architectures are patches moving
MSI arch-specific functions over to weak symbols and removal of
ARCH_SUPPORTS_MSI, acked by PCI maintainers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=fJ5x
-----END PGP SIGNATURE-----
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform changes from Olof Johansson:
"This branch contains mostly additions and changes to platform
enablement and SoC-level drivers. Since there's sometimes a
dependency on device-tree changes, there's also a fair amount of
those in this branch.
Pieces worth mentioning are:
- Mbus driver for Marvell platforms, allowing kernel configuration
and resource allocation of on-chip peripherals.
- Enablement of the mbus infrastructure from Marvell PCI-e drivers.
- Preparation of MSI support for Marvell platforms.
- Addition of new PCI-e host controller driver for Tegra platforms
- Some churn caused by sharing of macro names between i.MX 6Q and 6DL
platforms in the device tree sources and header files.
- Various suspend/PM updates for Tegra, including LP1 support.
- Versatile Express support for MCPM, part of big little support.
- Allwinner platform support for A20 and A31 SoCs (dual and quad
Cortex-A7)
- OMAP2+ support for DRA7, a new Cortex-A15-based SoC.
The code that touches other architectures are patches moving MSI
arch-specific functions over to weak symbols and removal of
ARCH_SUPPORTS_MSI, acked by PCI maintainers"
* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits)
tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE
PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource
ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list
ARM: dts: vf610-twr: enable i2c0 device
ARM: dts: i.MX51: Add one more I2C2 pinmux entry
ARM: dts: i.MX51: Move pins configuration under "iomuxc" label
ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
ARM: dts: i.MX27: Disable AUDMUX in the template
ARM: dts: wandboard: Add support for SDIO bcm4329
ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
ARM: dts: imx53-qsb: Make USBH1 functional
ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module
ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module
ARM: dts: imx6qdl-sabresd: Add touchscreen support
ARM: imx: add ocram clock for imx53
ARM: dts: imx: ocram size is different between imx6q and imx6dl
ARM: dts: imx27-phytec-phycore-som: Fix regulator settings
ARM: dts: i.MX27: Remove clock name from CPU node
...
854 lines
23 KiB
Plaintext
854 lines
23 KiB
Plaintext
config ARCH_MXC
|
|
bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
|
|
select ARCH_REQUIRE_GPIOLIB
|
|
select ARM_CPU_SUSPEND if PM
|
|
select ARM_PATCH_PHYS_VIRT
|
|
select AUTO_ZRELADDR if !ZBOOT_ROM
|
|
select CLKDEV_LOOKUP
|
|
select CLKSRC_MMIO
|
|
select GENERIC_ALLOCATOR
|
|
select GENERIC_CLOCKEVENTS
|
|
select GENERIC_IRQ_CHIP
|
|
select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
|
|
select MULTI_IRQ_HANDLER
|
|
select SPARSE_IRQ
|
|
select USE_OF
|
|
help
|
|
Support for Freescale MXC/iMX-based family of processors
|
|
|
|
menu "Freescale i.MX support"
|
|
depends on ARCH_MXC
|
|
|
|
config MXC_IRQ_PRIOR
|
|
bool "Use IRQ priority"
|
|
help
|
|
Select this if you want to use prioritized IRQ handling.
|
|
This feature prevents higher priority ISR to be interrupted
|
|
by lower priority IRQ even IRQF_DISABLED flag is not set.
|
|
This may be useful in embedded applications, where are strong
|
|
requirements for timing.
|
|
Say N here, unless you have a specialized requirement.
|
|
|
|
config MXC_TZIC
|
|
bool
|
|
|
|
config MXC_AVIC
|
|
bool
|
|
|
|
config MXC_DEBUG_BOARD
|
|
bool "Enable MXC debug board(for 3-stack)"
|
|
help
|
|
The debug board is an integral part of the MXC 3-stack(PDK)
|
|
platforms, it can be attached or removed from the peripheral
|
|
board. On debug board, several debug devices(ethernet, UART,
|
|
buttons, LEDs and JTAG) are implemented. Between the MCU and
|
|
these devices, a CPLD is added as a bridge which performs
|
|
data/address de-multiplexing and decode, signal level shift,
|
|
interrupt control and various board functions.
|
|
|
|
config HAVE_EPIT
|
|
bool
|
|
|
|
config MXC_USE_EPIT
|
|
bool "Use EPIT instead of GPT"
|
|
depends on HAVE_EPIT
|
|
help
|
|
Use EPIT as the system timer on systems that have it. Normally you
|
|
don't have a reason to do so as the EPIT has the same features and
|
|
uses the same clocks as the GPT. Anyway, on some systems the GPT
|
|
may be in use for other purposes.
|
|
|
|
config ARCH_HAS_RNGA
|
|
bool
|
|
|
|
config HAVE_IMX_ANATOP
|
|
bool
|
|
|
|
config HAVE_IMX_GPC
|
|
bool
|
|
|
|
config HAVE_IMX_MMDC
|
|
bool
|
|
|
|
config HAVE_IMX_SRC
|
|
def_bool y if SMP
|
|
select ARCH_HAS_RESET_CONTROLLER
|
|
|
|
config IMX_HAVE_IOMUX_V1
|
|
bool
|
|
|
|
config ARCH_MXC_IOMUX_V3
|
|
bool
|
|
|
|
config ARCH_MX1
|
|
bool
|
|
|
|
config ARCH_MX25
|
|
bool
|
|
|
|
config MACH_MX27
|
|
bool
|
|
|
|
config SOC_IMX1
|
|
bool
|
|
select ARCH_MX1
|
|
select COMMON_CLK
|
|
select CPU_ARM920T
|
|
select IMX_HAVE_IOMUX_V1
|
|
select MXC_AVIC
|
|
|
|
config SOC_IMX21
|
|
bool
|
|
select COMMON_CLK
|
|
select CPU_ARM926T
|
|
select IMX_HAVE_IOMUX_V1
|
|
select MXC_AVIC
|
|
|
|
config SOC_IMX25
|
|
bool
|
|
select ARCH_MX25
|
|
select ARCH_MXC_IOMUX_V3
|
|
select COMMON_CLK
|
|
select CPU_ARM926T
|
|
select MXC_AVIC
|
|
|
|
config SOC_IMX27
|
|
bool
|
|
select ARCH_HAS_CPUFREQ
|
|
select ARCH_HAS_OPP
|
|
select COMMON_CLK
|
|
select CPU_ARM926T
|
|
select IMX_HAVE_IOMUX_V1
|
|
select MACH_MX27
|
|
select MXC_AVIC
|
|
|
|
config SOC_IMX31
|
|
bool
|
|
select COMMON_CLK
|
|
select CPU_V6
|
|
select IMX_HAVE_PLATFORM_MXC_RNGA
|
|
select MXC_AVIC
|
|
select SMP_ON_UP if SMP
|
|
|
|
config SOC_IMX35
|
|
bool
|
|
select ARCH_MXC_IOMUX_V3
|
|
select COMMON_CLK
|
|
select CPU_V6K
|
|
select HAVE_EPIT
|
|
select MXC_AVIC
|
|
select SMP_ON_UP if SMP
|
|
|
|
config SOC_IMX5
|
|
bool
|
|
select ARCH_HAS_CPUFREQ
|
|
select ARCH_HAS_OPP
|
|
select ARCH_MXC_IOMUX_V3
|
|
select COMMON_CLK
|
|
select CPU_V7
|
|
select MXC_TZIC
|
|
|
|
config SOC_IMX51
|
|
bool
|
|
select HAVE_IMX_SRC
|
|
select PINCTRL
|
|
select PINCTRL_IMX51
|
|
select SOC_IMX5
|
|
|
|
if ARCH_MULTI_V4T
|
|
|
|
comment "MX1 platforms:"
|
|
config MACH_MXLADS
|
|
bool
|
|
|
|
config ARCH_MX1ADS
|
|
bool "MX1ADS platform"
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select MACH_MXLADS
|
|
select SOC_IMX1
|
|
help
|
|
Say Y here if you are using Motorola MX1ADS/MXLADS boards
|
|
|
|
config MACH_SCB9328
|
|
bool "Synertronixx scb9328"
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select SOC_IMX1
|
|
help
|
|
Say Y here if you are using a Synertronixx scb9328 board
|
|
|
|
config MACH_APF9328
|
|
bool "APF9328"
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select SOC_IMX1
|
|
help
|
|
Say Yes here if you are using the Armadeus APF9328 development board
|
|
|
|
endif
|
|
|
|
if ARCH_MULTI_V5
|
|
|
|
comment "MX21 platforms:"
|
|
|
|
config MACH_MX21ADS
|
|
bool "MX21ADS platform"
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select SOC_IMX21
|
|
help
|
|
Include support for MX21ADS platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
comment "MX25 platforms:"
|
|
|
|
config MACH_MX25_3DS
|
|
bool "Support MX25PDK (3DS) Platform"
|
|
select IMX_HAVE_PLATFORM_FLEXCAN
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMXDI_RTC
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_KEYPAD
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select SOC_IMX25
|
|
|
|
config MACH_EUKREA_CPUIMX25SD
|
|
bool "Support Eukrea CPUIMX25 Platform"
|
|
select IMX_HAVE_PLATFORM_FLEXCAN
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMXDI_RTC
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX25
|
|
|
|
choice
|
|
prompt "Baseboard"
|
|
depends on MACH_EUKREA_CPUIMX25SD
|
|
default MACH_EUKREA_MBIMXSD25_BASEBOARD
|
|
|
|
config MACH_EUKREA_MBIMXSD25_BASEBOARD
|
|
bool "Eukrea MBIMXSD development board"
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select LEDS_GPIO_REGISTER
|
|
help
|
|
This adds board specific devices that can be found on Eukrea's
|
|
MBIMXSD evaluation board.
|
|
|
|
endchoice
|
|
|
|
config MACH_IMX25_DT
|
|
bool "Support i.MX25 platforms from device tree"
|
|
select SOC_IMX25
|
|
help
|
|
Include support for Freescale i.MX25 based platforms
|
|
using the device tree for discovery
|
|
|
|
comment "MX27 platforms:"
|
|
|
|
config MACH_MX27ADS
|
|
bool "MX27ADS platform"
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_MXC_W1
|
|
select SOC_IMX27
|
|
help
|
|
Include support for MX27ADS platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_PCM038
|
|
bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_MXC_W1
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX27
|
|
help
|
|
Include support for phyCORE-i.MX27 (aka pcm038) platform. This
|
|
includes specific configurations for the module and its peripherals.
|
|
|
|
choice
|
|
prompt "Baseboard"
|
|
depends on MACH_PCM038
|
|
default MACH_PCM970_BASEBOARD
|
|
|
|
config MACH_PCM970_BASEBOARD
|
|
bool "PHYTEC PCM970 development board"
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
help
|
|
This adds board specific devices that can be found on Phytec's
|
|
PCM970 evaluation board.
|
|
|
|
endchoice
|
|
|
|
config MACH_CPUIMX27
|
|
bool "Eukrea CPUIMX27 module"
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_MXC_W1
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX27
|
|
help
|
|
Include support for Eukrea CPUIMX27 platform. This includes
|
|
specific configurations for the module and its peripherals.
|
|
|
|
config MACH_EUKREA_CPUIMX27_USESDHC2
|
|
bool "CPUIMX27 integrates SDHC2 module"
|
|
depends on MACH_CPUIMX27
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
help
|
|
This adds support for the internal SDHC2 used on CPUIMX27
|
|
for wifi or eMMC.
|
|
|
|
config MACH_EUKREA_CPUIMX27_USEUART4
|
|
bool "CPUIMX27 integrates UART4 module"
|
|
depends on MACH_CPUIMX27
|
|
help
|
|
This adds support for the internal UART4 used on CPUIMX27
|
|
for bluetooth.
|
|
|
|
choice
|
|
prompt "Baseboard"
|
|
depends on MACH_CPUIMX27
|
|
default MACH_EUKREA_MBIMX27_BASEBOARD
|
|
|
|
config MACH_EUKREA_MBIMX27_BASEBOARD
|
|
bool "Eukrea MBIMX27 development board"
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_KEYPAD
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select LEDS_GPIO_REGISTER
|
|
help
|
|
This adds board specific devices that can be found on Eukrea's
|
|
MBIMX27 evaluation board.
|
|
|
|
endchoice
|
|
|
|
config MACH_MX27_3DS
|
|
bool "MX27PDK platform"
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_KEYPAD
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MX2_CAMERA
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select MXC_DEBUG_BOARD
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX27
|
|
help
|
|
Include support for MX27PDK platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_IMX27_VISSTRIM_M10
|
|
bool "Vista Silicon i.MX27 Visstrim_m10"
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MX2_CAMERA
|
|
select IMX_HAVE_PLATFORM_MX2_EMMA
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select LEDS_GPIO_REGISTER
|
|
select SOC_IMX27
|
|
help
|
|
Include support for Visstrim_m10 platform and its different variants.
|
|
This includes specific configurations for the board and its
|
|
peripherals.
|
|
|
|
config MACH_IMX27LITE
|
|
bool "LogicPD MX27 LITEKIT platform"
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select SOC_IMX27
|
|
help
|
|
Include support for MX27 LITEKIT platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_PCA100
|
|
bool "Phytec phyCARD-s (pca100)"
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_MXC_W1
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX27
|
|
help
|
|
Include support for phyCARD-s (aka pca100) platform. This
|
|
includes specific configurations for the module and its peripherals.
|
|
|
|
config MACH_MXT_TD60
|
|
bool "Maxtrack i-MXT TD60"
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select SOC_IMX27
|
|
help
|
|
Include support for i-MXT (aka td60) platform. This
|
|
includes specific configurations for the module and its peripherals.
|
|
|
|
config MACH_IMX27IPCAM
|
|
bool "IMX27 IPCAM platform"
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select SOC_IMX27
|
|
help
|
|
Include support for IMX27 IPCAM platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_IMX27_DT
|
|
bool "Support i.MX27 platforms from device tree"
|
|
select SOC_IMX27
|
|
help
|
|
Include support for Freescale i.MX27 based platforms
|
|
using the device tree for discovery
|
|
|
|
endif
|
|
|
|
if ARCH_MULTI_V6
|
|
|
|
comment "MX31 platforms:"
|
|
|
|
config MACH_MX31ADS
|
|
bool "Support MX31ADS platforms"
|
|
default y
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select SOC_IMX31
|
|
help
|
|
Include support for MX31ADS platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_MX31ADS_WM1133_EV1
|
|
bool "Support Wolfson Microelectronics 1133-EV1 module"
|
|
depends on MACH_MX31ADS
|
|
depends on MFD_WM8350_I2C
|
|
depends on REGULATOR_WM8350 = y
|
|
help
|
|
Include support for the Wolfson Microelectronics 1133-EV1 PMU
|
|
and audio module for the MX31ADS platform.
|
|
|
|
config MACH_MX31LILLY
|
|
bool "Support MX31 LILLY-1131 platforms (INCO startec)"
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX31
|
|
help
|
|
Include support for mx31 based LILLY1131 modules. This includes
|
|
specific configurations for the board and its peripherals.
|
|
|
|
config MACH_MX31LITE
|
|
bool "Support MX31 LITEKIT (LogicPD)"
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_MXC_RTC
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select LEDS_GPIO_REGISTER
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX31
|
|
help
|
|
Include support for MX31 LITEKIT platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_PCM037
|
|
bool "Support Phytec pcm037 (i.MX31) platforms"
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_MXC_W1
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX31
|
|
help
|
|
Include support for Phytec pcm037 platform. This includes
|
|
specific configurations for the board and its peripherals.
|
|
|
|
config MACH_PCM037_EET
|
|
bool "Support pcm037 EET board extensions"
|
|
depends on MACH_PCM037
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
help
|
|
Add support for PCM037 EET baseboard extensions. If you are using the
|
|
OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
|
|
command-line parameter.
|
|
|
|
config MACH_MX31_3DS
|
|
bool "Support MX31PDK (3DS)"
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_KEYPAD
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select MXC_DEBUG_BOARD
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX31
|
|
help
|
|
Include support for MX31PDK (3DS) platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_MX31_3DS_MXC_NAND_USE_BBT
|
|
bool "Make the MXC NAND driver use the in flash Bad Block Table"
|
|
depends on MACH_MX31_3DS
|
|
depends on MTD_NAND_MXC
|
|
help
|
|
Enable this if you want that the MXC NAND driver uses the in flash
|
|
Bad Block Table to know what blocks are bad instead of scanning the
|
|
entire flash looking for bad block markers.
|
|
|
|
config MACH_MX31MOBOARD
|
|
bool "Support mx31moboard platforms (EPFL Mobots group)"
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select LEDS_GPIO_REGISTER
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX31
|
|
help
|
|
Include support for mx31moboard platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_QONG
|
|
bool "Support Dave/DENX QongEVB-LITE platform"
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select SOC_IMX31
|
|
help
|
|
Include support for Dave/DENX QongEVB-LITE platform. This includes
|
|
specific configurations for the board and its peripherals.
|
|
|
|
config MACH_ARMADILLO5X0
|
|
bool "Support Atmark Armadillo-500 Development Base Board"
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX31
|
|
help
|
|
Include support for Atmark Armadillo-500 platform. This includes
|
|
specific configurations for the board and its peripherals.
|
|
|
|
config MACH_KZM_ARM11_01
|
|
bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select SOC_IMX31
|
|
help
|
|
Include support for KZM-ARM11-01. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_BUG
|
|
bool "Support Buglabs BUGBase platform"
|
|
default y
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select SOC_IMX31
|
|
help
|
|
Include support for BUGBase 1.3 platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_IMX31_DT
|
|
bool "Support i.MX31 platforms from device tree"
|
|
select SOC_IMX31
|
|
help
|
|
Include support for Freescale i.MX31 based platforms
|
|
using the device tree for discovery.
|
|
|
|
comment "MX35 platforms:"
|
|
|
|
config MACH_PCM043
|
|
bool "Support Phytec pcm043 (i.MX35) platforms"
|
|
select IMX_HAVE_PLATFORM_FLEXCAN
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX35
|
|
help
|
|
Include support for Phytec pcm043 platform. This includes
|
|
specific configurations for the board and its peripherals.
|
|
|
|
config MACH_MX35_3DS
|
|
bool "Support MX35PDK platform"
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_FB
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_MXC_RTC
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select MXC_DEBUG_BOARD
|
|
select SOC_IMX35
|
|
help
|
|
Include support for MX35PDK platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
config MACH_EUKREA_CPUIMX35SD
|
|
bool "Support Eukrea CPUIMX35 Platform"
|
|
select IMX_HAVE_PLATFORM_FLEXCAN
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
|
select SOC_IMX35
|
|
help
|
|
Include support for Eukrea CPUIMX35 platform. This includes
|
|
specific configurations for the board and its peripherals.
|
|
|
|
choice
|
|
prompt "Baseboard"
|
|
depends on MACH_EUKREA_CPUIMX35SD
|
|
default MACH_EUKREA_MBIMXSD35_BASEBOARD
|
|
|
|
config MACH_EUKREA_MBIMXSD35_BASEBOARD
|
|
bool "Eukrea MBIMXSD development board"
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select LEDS_GPIO_REGISTER
|
|
help
|
|
This adds board specific devices that can be found on Eukrea's
|
|
MBIMXSD evaluation board.
|
|
|
|
endchoice
|
|
|
|
config MACH_VPR200
|
|
bool "Support VPR200 platform"
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select SOC_IMX35
|
|
help
|
|
Include support for VPR200 platform. This includes specific
|
|
configurations for the board and its peripherals.
|
|
|
|
endif
|
|
|
|
if ARCH_MULTI_V7
|
|
|
|
comment "i.MX51 machines:"
|
|
|
|
config MACH_IMX51_DT
|
|
bool "Support i.MX51 platforms from device tree"
|
|
select SOC_IMX51
|
|
help
|
|
Include support for Freescale i.MX51 based platforms
|
|
using the device tree for discovery
|
|
|
|
config MACH_MX51_BABBAGE
|
|
bool "Support MX51 BABBAGE platforms"
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select SOC_IMX51
|
|
help
|
|
Include support for MX51 Babbage platform, also known as MX51EVK in
|
|
u-boot. This includes specific configurations for the board and its
|
|
peripherals.
|
|
|
|
config MACH_EUKREA_CPUIMX51SD
|
|
bool "Support Eukrea CPUIMX51SD module"
|
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
|
select IMX_HAVE_PLATFORM_IMX_UART
|
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
|
select SOC_IMX51
|
|
help
|
|
Include support for Eukrea CPUIMX51SD platform. This includes
|
|
specific configurations for the module and its peripherals.
|
|
|
|
choice
|
|
prompt "Baseboard"
|
|
depends on MACH_EUKREA_CPUIMX51SD
|
|
default MACH_EUKREA_MBIMXSD51_BASEBOARD
|
|
|
|
config MACH_EUKREA_MBIMXSD51_BASEBOARD
|
|
prompt "Eukrea MBIMXSD development board"
|
|
bool
|
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
|
select LEDS_GPIO_REGISTER
|
|
help
|
|
This adds board specific devices that can be found on Eukrea's
|
|
MBIMXSD evaluation board.
|
|
|
|
endchoice
|
|
|
|
comment "Device tree only"
|
|
|
|
config SOC_IMX53
|
|
bool "i.MX53 support"
|
|
select HAVE_IMX_SRC
|
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
|
select PINCTRL
|
|
select PINCTRL_IMX53
|
|
select SOC_IMX5
|
|
|
|
help
|
|
This enables support for Freescale i.MX53 processor.
|
|
|
|
config SOC_IMX6Q
|
|
bool "i.MX6 Quad/DualLite support"
|
|
select ARCH_HAS_CPUFREQ
|
|
select ARCH_HAS_OPP
|
|
select ARM_ERRATA_754322
|
|
select ARM_ERRATA_764369 if SMP
|
|
select ARM_ERRATA_775420
|
|
select ARM_GIC
|
|
select COMMON_CLK
|
|
select CPU_V7
|
|
select HAVE_ARM_SCU if SMP
|
|
select HAVE_ARM_TWD if SMP
|
|
select HAVE_IMX_ANATOP
|
|
select HAVE_IMX_GPC
|
|
select HAVE_IMX_MMDC
|
|
select HAVE_IMX_SRC
|
|
select HAVE_SMP
|
|
select MFD_SYSCON
|
|
select PINCTRL
|
|
select PINCTRL_IMX6Q
|
|
select PL310_ERRATA_588369 if CACHE_PL310
|
|
select PL310_ERRATA_727915 if CACHE_PL310
|
|
select PL310_ERRATA_769419 if CACHE_PL310
|
|
select PM_OPP if PM
|
|
|
|
help
|
|
This enables support for Freescale i.MX6 Quad processor.
|
|
|
|
config SOC_IMX6SL
|
|
bool "i.MX6 SoloLite support"
|
|
select ARM_ERRATA_754322
|
|
select ARM_ERRATA_775420
|
|
select ARM_GIC
|
|
select CPU_V7
|
|
select HAVE_IMX_ANATOP
|
|
select HAVE_IMX_GPC
|
|
select HAVE_IMX_MMDC
|
|
select HAVE_IMX_SRC
|
|
select MFD_SYSCON
|
|
select PINCTRL
|
|
select PINCTRL_IMX6SL
|
|
select PL310_ERRATA_588369 if CACHE_PL310
|
|
select PL310_ERRATA_727915 if CACHE_PL310
|
|
select PL310_ERRATA_769419 if CACHE_PL310
|
|
|
|
help
|
|
This enables support for Freescale i.MX6 SoloLite processor.
|
|
|
|
config SOC_VF610
|
|
bool "Vybrid Family VF610 support"
|
|
select CPU_V7
|
|
select ARM_GIC
|
|
select CLKSRC_OF
|
|
select PINCTRL
|
|
select PINCTRL_VF610
|
|
select VF_PIT_TIMER
|
|
select PL310_ERRATA_588369 if CACHE_PL310
|
|
select PL310_ERRATA_727915 if CACHE_PL310
|
|
select PL310_ERRATA_769419 if CACHE_PL310
|
|
|
|
help
|
|
This enable support for Freescale Vybrid VF610 processor.
|
|
|
|
endif
|
|
|
|
source "arch/arm/mach-imx/devices/Kconfig"
|
|
|
|
endmenu
|