mirror of
https://github.com/torvalds/linux.git
synced 2024-12-23 19:31:53 +00:00
c56f5f1de3
Add SGPIO support to Marvell 94xx. Signed-off-by: Wilfried Weissmann <Wilfried.Weissmann@gmx.at> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
1196 lines
29 KiB
C
1196 lines
29 KiB
C
/*
|
|
* Marvell 88SE94xx hardware specific
|
|
*
|
|
* Copyright 2007 Red Hat, Inc.
|
|
* Copyright 2008 Marvell. <kewei@marvell.com>
|
|
* Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
|
|
*
|
|
* This file is licensed under GPLv2.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; version 2 of the
|
|
* License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
|
|
* USA
|
|
*/
|
|
|
|
#include "mv_sas.h"
|
|
#include "mv_94xx.h"
|
|
#include "mv_chips.h"
|
|
|
|
static void mvs_94xx_detect_porttype(struct mvs_info *mvi, int i)
|
|
{
|
|
u32 reg;
|
|
struct mvs_phy *phy = &mvi->phy[i];
|
|
u32 phy_status;
|
|
|
|
mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE3);
|
|
reg = mvs_read_port_vsr_data(mvi, i);
|
|
phy_status = ((reg & 0x3f0000) >> 16) & 0xff;
|
|
phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
|
|
switch (phy_status) {
|
|
case 0x10:
|
|
phy->phy_type |= PORT_TYPE_SAS;
|
|
break;
|
|
case 0x1d:
|
|
default:
|
|
phy->phy_type |= PORT_TYPE_SATA;
|
|
break;
|
|
}
|
|
}
|
|
|
|
void set_phy_tuning(struct mvs_info *mvi, int phy_id,
|
|
struct phy_tuning phy_tuning)
|
|
{
|
|
u32 tmp, setting_0 = 0, setting_1 = 0;
|
|
u8 i;
|
|
|
|
/* Remap information for B0 chip:
|
|
*
|
|
* R0Ch -> R118h[15:0] (Adapted DFE F3 - F5 coefficient)
|
|
* R0Dh -> R118h[31:16] (Generation 1 Setting 0)
|
|
* R0Eh -> R11Ch[15:0] (Generation 1 Setting 1)
|
|
* R0Fh -> R11Ch[31:16] (Generation 2 Setting 0)
|
|
* R10h -> R120h[15:0] (Generation 2 Setting 1)
|
|
* R11h -> R120h[31:16] (Generation 3 Setting 0)
|
|
* R12h -> R124h[15:0] (Generation 3 Setting 1)
|
|
* R13h -> R124h[31:16] (Generation 4 Setting 0 (Reserved))
|
|
*/
|
|
|
|
/* A0 has a different set of registers */
|
|
if (mvi->pdev->revision == VANIR_A0_REV)
|
|
return;
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
/* loop 3 times, set Gen 1, Gen 2, Gen 3 */
|
|
switch (i) {
|
|
case 0:
|
|
setting_0 = GENERATION_1_SETTING;
|
|
setting_1 = GENERATION_1_2_SETTING;
|
|
break;
|
|
case 1:
|
|
setting_0 = GENERATION_1_2_SETTING;
|
|
setting_1 = GENERATION_2_3_SETTING;
|
|
break;
|
|
case 2:
|
|
setting_0 = GENERATION_2_3_SETTING;
|
|
setting_1 = GENERATION_3_4_SETTING;
|
|
break;
|
|
}
|
|
|
|
/* Set:
|
|
*
|
|
* Transmitter Emphasis Enable
|
|
* Transmitter Emphasis Amplitude
|
|
* Transmitter Amplitude
|
|
*/
|
|
mvs_write_port_vsr_addr(mvi, phy_id, setting_0);
|
|
tmp = mvs_read_port_vsr_data(mvi, phy_id);
|
|
tmp &= ~(0xFBE << 16);
|
|
tmp |= (((phy_tuning.trans_emp_en << 11) |
|
|
(phy_tuning.trans_emp_amp << 7) |
|
|
(phy_tuning.trans_amp << 1)) << 16);
|
|
mvs_write_port_vsr_data(mvi, phy_id, tmp);
|
|
|
|
/* Set Transmitter Amplitude Adjust */
|
|
mvs_write_port_vsr_addr(mvi, phy_id, setting_1);
|
|
tmp = mvs_read_port_vsr_data(mvi, phy_id);
|
|
tmp &= ~(0xC000);
|
|
tmp |= (phy_tuning.trans_amp_adj << 14);
|
|
mvs_write_port_vsr_data(mvi, phy_id, tmp);
|
|
}
|
|
}
|
|
|
|
void set_phy_ffe_tuning(struct mvs_info *mvi, int phy_id,
|
|
struct ffe_control ffe)
|
|
{
|
|
u32 tmp;
|
|
|
|
/* Don't run this if A0/B0 */
|
|
if ((mvi->pdev->revision == VANIR_A0_REV)
|
|
|| (mvi->pdev->revision == VANIR_B0_REV))
|
|
return;
|
|
|
|
/* FFE Resistor and Capacitor */
|
|
/* R10Ch DFE Resolution Control/Squelch and FFE Setting
|
|
*
|
|
* FFE_FORCE [7]
|
|
* FFE_RES_SEL [6:4]
|
|
* FFE_CAP_SEL [3:0]
|
|
*/
|
|
mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_FFE_CONTROL);
|
|
tmp = mvs_read_port_vsr_data(mvi, phy_id);
|
|
tmp &= ~0xFF;
|
|
|
|
/* Read from HBA_Info_Page */
|
|
tmp |= ((0x1 << 7) |
|
|
(ffe.ffe_rss_sel << 4) |
|
|
(ffe.ffe_cap_sel << 0));
|
|
|
|
mvs_write_port_vsr_data(mvi, phy_id, tmp);
|
|
|
|
/* R064h PHY Mode Register 1
|
|
*
|
|
* DFE_DIS 18
|
|
*/
|
|
mvs_write_port_vsr_addr(mvi, phy_id, VSR_REF_CLOCK_CRTL);
|
|
tmp = mvs_read_port_vsr_data(mvi, phy_id);
|
|
tmp &= ~0x40001;
|
|
/* Hard coding */
|
|
/* No defines in HBA_Info_Page */
|
|
tmp |= (0 << 18);
|
|
mvs_write_port_vsr_data(mvi, phy_id, tmp);
|
|
|
|
/* R110h DFE F0-F1 Coefficient Control/DFE Update Control
|
|
*
|
|
* DFE_UPDATE_EN [11:6]
|
|
* DFE_FX_FORCE [5:0]
|
|
*/
|
|
mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_DFE_UPDATE_CRTL);
|
|
tmp = mvs_read_port_vsr_data(mvi, phy_id);
|
|
tmp &= ~0xFFF;
|
|
/* Hard coding */
|
|
/* No defines in HBA_Info_Page */
|
|
tmp |= ((0x3F << 6) | (0x0 << 0));
|
|
mvs_write_port_vsr_data(mvi, phy_id, tmp);
|
|
|
|
/* R1A0h Interface and Digital Reference Clock Control/Reserved_50h
|
|
*
|
|
* FFE_TRAIN_EN 3
|
|
*/
|
|
mvs_write_port_vsr_addr(mvi, phy_id, VSR_REF_CLOCK_CRTL);
|
|
tmp = mvs_read_port_vsr_data(mvi, phy_id);
|
|
tmp &= ~0x8;
|
|
/* Hard coding */
|
|
/* No defines in HBA_Info_Page */
|
|
tmp |= (0 << 3);
|
|
mvs_write_port_vsr_data(mvi, phy_id, tmp);
|
|
}
|
|
|
|
/*Notice: this function must be called when phy is disabled*/
|
|
void set_phy_rate(struct mvs_info *mvi, int phy_id, u8 rate)
|
|
{
|
|
union reg_phy_cfg phy_cfg, phy_cfg_tmp;
|
|
mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_MODE2);
|
|
phy_cfg_tmp.v = mvs_read_port_vsr_data(mvi, phy_id);
|
|
phy_cfg.v = 0;
|
|
phy_cfg.u.disable_phy = phy_cfg_tmp.u.disable_phy;
|
|
phy_cfg.u.sas_support = 1;
|
|
phy_cfg.u.sata_support = 1;
|
|
phy_cfg.u.sata_host_mode = 1;
|
|
|
|
switch (rate) {
|
|
case 0x0:
|
|
/* support 1.5 Gbps */
|
|
phy_cfg.u.speed_support = 1;
|
|
phy_cfg.u.snw_3_support = 0;
|
|
phy_cfg.u.tx_lnk_parity = 1;
|
|
phy_cfg.u.tx_spt_phs_lnk_rate = 0x30;
|
|
break;
|
|
case 0x1:
|
|
|
|
/* support 1.5, 3.0 Gbps */
|
|
phy_cfg.u.speed_support = 3;
|
|
phy_cfg.u.tx_spt_phs_lnk_rate = 0x3c;
|
|
phy_cfg.u.tx_lgcl_lnk_rate = 0x08;
|
|
break;
|
|
case 0x2:
|
|
default:
|
|
/* support 1.5, 3.0, 6.0 Gbps */
|
|
phy_cfg.u.speed_support = 7;
|
|
phy_cfg.u.snw_3_support = 1;
|
|
phy_cfg.u.tx_lnk_parity = 1;
|
|
phy_cfg.u.tx_spt_phs_lnk_rate = 0x3f;
|
|
phy_cfg.u.tx_lgcl_lnk_rate = 0x09;
|
|
break;
|
|
}
|
|
mvs_write_port_vsr_data(mvi, phy_id, phy_cfg.v);
|
|
}
|
|
|
|
static void mvs_94xx_config_reg_from_hba(struct mvs_info *mvi, int phy_id)
|
|
{
|
|
u32 temp;
|
|
temp = (u32)(*(u32 *)&mvi->hba_info_param.phy_tuning[phy_id]);
|
|
if (temp == 0xFFFFFFFFL) {
|
|
mvi->hba_info_param.phy_tuning[phy_id].trans_emp_amp = 0x6;
|
|
mvi->hba_info_param.phy_tuning[phy_id].trans_amp = 0x1A;
|
|
mvi->hba_info_param.phy_tuning[phy_id].trans_amp_adj = 0x3;
|
|
}
|
|
|
|
temp = (u8)(*(u8 *)&mvi->hba_info_param.ffe_ctl[phy_id]);
|
|
if (temp == 0xFFL) {
|
|
switch (mvi->pdev->revision) {
|
|
case VANIR_A0_REV:
|
|
case VANIR_B0_REV:
|
|
mvi->hba_info_param.ffe_ctl[phy_id].ffe_rss_sel = 0x7;
|
|
mvi->hba_info_param.ffe_ctl[phy_id].ffe_cap_sel = 0x7;
|
|
break;
|
|
case VANIR_C0_REV:
|
|
case VANIR_C1_REV:
|
|
case VANIR_C2_REV:
|
|
default:
|
|
mvi->hba_info_param.ffe_ctl[phy_id].ffe_rss_sel = 0x7;
|
|
mvi->hba_info_param.ffe_ctl[phy_id].ffe_cap_sel = 0xC;
|
|
break;
|
|
}
|
|
}
|
|
|
|
temp = (u8)(*(u8 *)&mvi->hba_info_param.phy_rate[phy_id]);
|
|
if (temp == 0xFFL)
|
|
/*set default phy_rate = 6Gbps*/
|
|
mvi->hba_info_param.phy_rate[phy_id] = 0x2;
|
|
|
|
set_phy_tuning(mvi, phy_id,
|
|
mvi->hba_info_param.phy_tuning[phy_id]);
|
|
set_phy_ffe_tuning(mvi, phy_id,
|
|
mvi->hba_info_param.ffe_ctl[phy_id]);
|
|
set_phy_rate(mvi, phy_id,
|
|
mvi->hba_info_param.phy_rate[phy_id]);
|
|
}
|
|
|
|
static void mvs_94xx_enable_xmt(struct mvs_info *mvi, int phy_id)
|
|
{
|
|
void __iomem *regs = mvi->regs;
|
|
u32 tmp;
|
|
|
|
tmp = mr32(MVS_PCS);
|
|
tmp |= 1 << (phy_id + PCS_EN_PORT_XMT_SHIFT2);
|
|
mw32(MVS_PCS, tmp);
|
|
}
|
|
|
|
static void mvs_94xx_phy_reset(struct mvs_info *mvi, u32 phy_id, int hard)
|
|
{
|
|
u32 tmp;
|
|
u32 delay = 5000;
|
|
if (hard == MVS_PHY_TUNE) {
|
|
mvs_write_port_cfg_addr(mvi, phy_id, PHYR_SATA_CTL);
|
|
tmp = mvs_read_port_cfg_data(mvi, phy_id);
|
|
mvs_write_port_cfg_data(mvi, phy_id, tmp|0x20000000);
|
|
mvs_write_port_cfg_data(mvi, phy_id, tmp|0x100000);
|
|
return;
|
|
}
|
|
tmp = mvs_read_port_irq_stat(mvi, phy_id);
|
|
tmp &= ~PHYEV_RDY_CH;
|
|
mvs_write_port_irq_stat(mvi, phy_id, tmp);
|
|
if (hard) {
|
|
tmp = mvs_read_phy_ctl(mvi, phy_id);
|
|
tmp |= PHY_RST_HARD;
|
|
mvs_write_phy_ctl(mvi, phy_id, tmp);
|
|
do {
|
|
tmp = mvs_read_phy_ctl(mvi, phy_id);
|
|
udelay(10);
|
|
delay--;
|
|
} while ((tmp & PHY_RST_HARD) && delay);
|
|
if (!delay)
|
|
mv_dprintk("phy hard reset failed.\n");
|
|
} else {
|
|
tmp = mvs_read_phy_ctl(mvi, phy_id);
|
|
tmp |= PHY_RST;
|
|
mvs_write_phy_ctl(mvi, phy_id, tmp);
|
|
}
|
|
}
|
|
|
|
static void mvs_94xx_phy_disable(struct mvs_info *mvi, u32 phy_id)
|
|
{
|
|
u32 tmp;
|
|
mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_MODE2);
|
|
tmp = mvs_read_port_vsr_data(mvi, phy_id);
|
|
mvs_write_port_vsr_data(mvi, phy_id, tmp | 0x00800000);
|
|
}
|
|
|
|
static void mvs_94xx_phy_enable(struct mvs_info *mvi, u32 phy_id)
|
|
{
|
|
u32 tmp;
|
|
u8 revision = 0;
|
|
|
|
revision = mvi->pdev->revision;
|
|
if (revision == VANIR_A0_REV) {
|
|
mvs_write_port_vsr_addr(mvi, phy_id, CMD_HOST_RD_DATA);
|
|
mvs_write_port_vsr_data(mvi, phy_id, 0x8300ffc1);
|
|
}
|
|
if (revision == VANIR_B0_REV) {
|
|
mvs_write_port_vsr_addr(mvi, phy_id, CMD_APP_MEM_CTL);
|
|
mvs_write_port_vsr_data(mvi, phy_id, 0x08001006);
|
|
mvs_write_port_vsr_addr(mvi, phy_id, CMD_HOST_RD_DATA);
|
|
mvs_write_port_vsr_data(mvi, phy_id, 0x0000705f);
|
|
}
|
|
|
|
mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_MODE2);
|
|
tmp = mvs_read_port_vsr_data(mvi, phy_id);
|
|
tmp |= bit(0);
|
|
mvs_write_port_vsr_data(mvi, phy_id, tmp & 0xfd7fffff);
|
|
}
|
|
|
|
static void mvs_94xx_sgpio_init(struct mvs_info *mvi)
|
|
{
|
|
void __iomem *regs = mvi->regs_ex - 0x10200;
|
|
u32 tmp;
|
|
|
|
tmp = mr32(MVS_HST_CHIP_CONFIG);
|
|
tmp |= 0x100;
|
|
mw32(MVS_HST_CHIP_CONFIG, tmp);
|
|
|
|
mw32(MVS_SGPIO_CTRL + MVS_SGPIO_HOST_OFFSET * mvi->id,
|
|
MVS_SGPIO_CTRL_SDOUT_AUTO << MVS_SGPIO_CTRL_SDOUT_SHIFT);
|
|
|
|
mw32(MVS_SGPIO_CFG1 + MVS_SGPIO_HOST_OFFSET * mvi->id,
|
|
8 << MVS_SGPIO_CFG1_LOWA_SHIFT |
|
|
8 << MVS_SGPIO_CFG1_HIA_SHIFT |
|
|
4 << MVS_SGPIO_CFG1_LOWB_SHIFT |
|
|
4 << MVS_SGPIO_CFG1_HIB_SHIFT |
|
|
2 << MVS_SGPIO_CFG1_MAXACTON_SHIFT |
|
|
1 << MVS_SGPIO_CFG1_FORCEACTOFF_SHIFT
|
|
);
|
|
|
|
mw32(MVS_SGPIO_CFG2 + MVS_SGPIO_HOST_OFFSET * mvi->id,
|
|
(300000 / 100) << MVS_SGPIO_CFG2_CLK_SHIFT | /* 100kHz clock */
|
|
66 << MVS_SGPIO_CFG2_BLINK_SHIFT /* (66 * 0,121 Hz?)*/
|
|
);
|
|
|
|
mw32(MVS_SGPIO_CFG0 + MVS_SGPIO_HOST_OFFSET * mvi->id,
|
|
MVS_SGPIO_CFG0_ENABLE |
|
|
MVS_SGPIO_CFG0_BLINKA |
|
|
MVS_SGPIO_CFG0_BLINKB |
|
|
/* 3*4 data bits / PDU */
|
|
(12 - 1) << MVS_SGPIO_CFG0_AUT_BITLEN_SHIFT
|
|
);
|
|
|
|
mw32(MVS_SGPIO_DCTRL + MVS_SGPIO_HOST_OFFSET * mvi->id,
|
|
DEFAULT_SGPIO_BITS);
|
|
|
|
mw32(MVS_SGPIO_DSRC + MVS_SGPIO_HOST_OFFSET * mvi->id,
|
|
((mvi->id * 4) + 3) << (8 * 3) |
|
|
((mvi->id * 4) + 2) << (8 * 2) |
|
|
((mvi->id * 4) + 1) << (8 * 1) |
|
|
((mvi->id * 4) + 0) << (8 * 0));
|
|
|
|
}
|
|
|
|
static int mvs_94xx_init(struct mvs_info *mvi)
|
|
{
|
|
void __iomem *regs = mvi->regs;
|
|
int i;
|
|
u32 tmp, cctl;
|
|
u8 revision;
|
|
|
|
revision = mvi->pdev->revision;
|
|
mvs_show_pcie_usage(mvi);
|
|
if (mvi->flags & MVF_FLAG_SOC) {
|
|
tmp = mr32(MVS_PHY_CTL);
|
|
tmp &= ~PCTL_PWR_OFF;
|
|
tmp |= PCTL_PHY_DSBL;
|
|
mw32(MVS_PHY_CTL, tmp);
|
|
}
|
|
|
|
/* Init Chip */
|
|
/* make sure RST is set; HBA_RST /should/ have done that for us */
|
|
cctl = mr32(MVS_CTL) & 0xFFFF;
|
|
if (cctl & CCTL_RST)
|
|
cctl &= ~CCTL_RST;
|
|
else
|
|
mw32_f(MVS_CTL, cctl | CCTL_RST);
|
|
|
|
if (mvi->flags & MVF_FLAG_SOC) {
|
|
tmp = mr32(MVS_PHY_CTL);
|
|
tmp &= ~PCTL_PWR_OFF;
|
|
tmp |= PCTL_COM_ON;
|
|
tmp &= ~PCTL_PHY_DSBL;
|
|
tmp |= PCTL_LINK_RST;
|
|
mw32(MVS_PHY_CTL, tmp);
|
|
msleep(100);
|
|
tmp &= ~PCTL_LINK_RST;
|
|
mw32(MVS_PHY_CTL, tmp);
|
|
msleep(100);
|
|
}
|
|
|
|
/* disable Multiplexing, enable phy implemented */
|
|
mw32(MVS_PORTS_IMP, 0xFF);
|
|
|
|
if (revision == VANIR_A0_REV) {
|
|
mw32(MVS_PA_VSR_ADDR, CMD_CMWK_OOB_DET);
|
|
mw32(MVS_PA_VSR_PORT, 0x00018080);
|
|
}
|
|
mw32(MVS_PA_VSR_ADDR, VSR_PHY_MODE2);
|
|
if (revision == VANIR_A0_REV || revision == VANIR_B0_REV)
|
|
/* set 6G/3G/1.5G, multiplexing, without SSC */
|
|
mw32(MVS_PA_VSR_PORT, 0x0084d4fe);
|
|
else
|
|
/* set 6G/3G/1.5G, multiplexing, with and without SSC */
|
|
mw32(MVS_PA_VSR_PORT, 0x0084fffe);
|
|
|
|
if (revision == VANIR_B0_REV) {
|
|
mw32(MVS_PA_VSR_ADDR, CMD_APP_MEM_CTL);
|
|
mw32(MVS_PA_VSR_PORT, 0x08001006);
|
|
mw32(MVS_PA_VSR_ADDR, CMD_HOST_RD_DATA);
|
|
mw32(MVS_PA_VSR_PORT, 0x0000705f);
|
|
}
|
|
|
|
/* reset control */
|
|
mw32(MVS_PCS, 0); /* MVS_PCS */
|
|
mw32(MVS_STP_REG_SET_0, 0);
|
|
mw32(MVS_STP_REG_SET_1, 0);
|
|
|
|
/* init phys */
|
|
mvs_phy_hacks(mvi);
|
|
|
|
/* disable non data frame retry */
|
|
tmp = mvs_cr32(mvi, CMD_SAS_CTL1);
|
|
if ((revision == VANIR_A0_REV) ||
|
|
(revision == VANIR_B0_REV) ||
|
|
(revision == VANIR_C0_REV)) {
|
|
tmp &= ~0xffff;
|
|
tmp |= 0x007f;
|
|
mvs_cw32(mvi, CMD_SAS_CTL1, tmp);
|
|
}
|
|
|
|
/* set LED blink when IO*/
|
|
mw32(MVS_PA_VSR_ADDR, VSR_PHY_ACT_LED);
|
|
tmp = mr32(MVS_PA_VSR_PORT);
|
|
tmp &= 0xFFFF00FF;
|
|
tmp |= 0x00003300;
|
|
mw32(MVS_PA_VSR_PORT, tmp);
|
|
|
|
mw32(MVS_CMD_LIST_LO, mvi->slot_dma);
|
|
mw32(MVS_CMD_LIST_HI, (mvi->slot_dma >> 16) >> 16);
|
|
|
|
mw32(MVS_RX_FIS_LO, mvi->rx_fis_dma);
|
|
mw32(MVS_RX_FIS_HI, (mvi->rx_fis_dma >> 16) >> 16);
|
|
|
|
mw32(MVS_TX_CFG, MVS_CHIP_SLOT_SZ);
|
|
mw32(MVS_TX_LO, mvi->tx_dma);
|
|
mw32(MVS_TX_HI, (mvi->tx_dma >> 16) >> 16);
|
|
|
|
mw32(MVS_RX_CFG, MVS_RX_RING_SZ);
|
|
mw32(MVS_RX_LO, mvi->rx_dma);
|
|
mw32(MVS_RX_HI, (mvi->rx_dma >> 16) >> 16);
|
|
|
|
for (i = 0; i < mvi->chip->n_phy; i++) {
|
|
mvs_94xx_phy_disable(mvi, i);
|
|
/* set phy local SAS address */
|
|
mvs_set_sas_addr(mvi, i, CONFIG_ID_FRAME3, CONFIG_ID_FRAME4,
|
|
cpu_to_le64(mvi->phy[i].dev_sas_addr));
|
|
|
|
mvs_94xx_enable_xmt(mvi, i);
|
|
mvs_94xx_config_reg_from_hba(mvi, i);
|
|
mvs_94xx_phy_enable(mvi, i);
|
|
|
|
mvs_94xx_phy_reset(mvi, i, PHY_RST_HARD);
|
|
msleep(500);
|
|
mvs_94xx_detect_porttype(mvi, i);
|
|
}
|
|
|
|
if (mvi->flags & MVF_FLAG_SOC) {
|
|
/* set select registers */
|
|
writel(0x0E008000, regs + 0x000);
|
|
writel(0x59000008, regs + 0x004);
|
|
writel(0x20, regs + 0x008);
|
|
writel(0x20, regs + 0x00c);
|
|
writel(0x20, regs + 0x010);
|
|
writel(0x20, regs + 0x014);
|
|
writel(0x20, regs + 0x018);
|
|
writel(0x20, regs + 0x01c);
|
|
}
|
|
for (i = 0; i < mvi->chip->n_phy; i++) {
|
|
/* clear phy int status */
|
|
tmp = mvs_read_port_irq_stat(mvi, i);
|
|
tmp &= ~PHYEV_SIG_FIS;
|
|
mvs_write_port_irq_stat(mvi, i, tmp);
|
|
|
|
/* set phy int mask */
|
|
tmp = PHYEV_RDY_CH | PHYEV_BROAD_CH |
|
|
PHYEV_ID_DONE | PHYEV_DCDR_ERR | PHYEV_CRC_ERR ;
|
|
mvs_write_port_irq_mask(mvi, i, tmp);
|
|
|
|
msleep(100);
|
|
mvs_update_phyinfo(mvi, i, 1);
|
|
}
|
|
|
|
/* little endian for open address and command table, etc. */
|
|
cctl = mr32(MVS_CTL);
|
|
cctl |= CCTL_ENDIAN_CMD;
|
|
cctl &= ~CCTL_ENDIAN_OPEN;
|
|
cctl |= CCTL_ENDIAN_RSP;
|
|
mw32_f(MVS_CTL, cctl);
|
|
|
|
/* reset CMD queue */
|
|
tmp = mr32(MVS_PCS);
|
|
tmp |= PCS_CMD_RST;
|
|
tmp &= ~PCS_SELF_CLEAR;
|
|
mw32(MVS_PCS, tmp);
|
|
/*
|
|
* the max count is 0x1ff, while our max slot is 0x200,
|
|
* it will make count 0.
|
|
*/
|
|
tmp = 0;
|
|
if (MVS_CHIP_SLOT_SZ > 0x1ff)
|
|
mw32(MVS_INT_COAL, 0x1ff | COAL_EN);
|
|
else
|
|
mw32(MVS_INT_COAL, MVS_CHIP_SLOT_SZ | COAL_EN);
|
|
|
|
/* default interrupt coalescing time is 128us */
|
|
tmp = 0x10000 | interrupt_coalescing;
|
|
mw32(MVS_INT_COAL_TMOUT, tmp);
|
|
|
|
/* ladies and gentlemen, start your engines */
|
|
mw32(MVS_TX_CFG, 0);
|
|
mw32(MVS_TX_CFG, MVS_CHIP_SLOT_SZ | TX_EN);
|
|
mw32(MVS_RX_CFG, MVS_RX_RING_SZ | RX_EN);
|
|
/* enable CMD/CMPL_Q/RESP mode */
|
|
mw32(MVS_PCS, PCS_SATA_RETRY_2 | PCS_FIS_RX_EN |
|
|
PCS_CMD_EN | PCS_CMD_STOP_ERR);
|
|
|
|
/* enable completion queue interrupt */
|
|
tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM | CINT_SRS | CINT_CI_STOP |
|
|
CINT_DMA_PCIE | CINT_NON_SPEC_NCQ_ERROR);
|
|
tmp |= CINT_PHY_MASK;
|
|
mw32(MVS_INT_MASK, tmp);
|
|
|
|
tmp = mvs_cr32(mvi, CMD_LINK_TIMER);
|
|
tmp |= 0xFFFF0000;
|
|
mvs_cw32(mvi, CMD_LINK_TIMER, tmp);
|
|
|
|
/* tune STP performance */
|
|
tmp = 0x003F003F;
|
|
mvs_cw32(mvi, CMD_PL_TIMER, tmp);
|
|
|
|
/* This can improve expander large block size seq write performance */
|
|
tmp = mvs_cr32(mvi, CMD_PORT_LAYER_TIMER1);
|
|
tmp |= 0xFFFF007F;
|
|
mvs_cw32(mvi, CMD_PORT_LAYER_TIMER1, tmp);
|
|
|
|
/* change the connection open-close behavior (bit 9)
|
|
* set bit8 to 1 for performance tuning */
|
|
tmp = mvs_cr32(mvi, CMD_SL_MODE0);
|
|
tmp |= 0x00000300;
|
|
/* set bit0 to 0 to enable retry for no_dest reject case */
|
|
tmp &= 0xFFFFFFFE;
|
|
mvs_cw32(mvi, CMD_SL_MODE0, tmp);
|
|
|
|
/* Enable SRS interrupt */
|
|
mw32(MVS_INT_MASK_SRS_0, 0xFFFF);
|
|
|
|
mvs_94xx_sgpio_init(mvi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvs_94xx_ioremap(struct mvs_info *mvi)
|
|
{
|
|
if (!mvs_ioremap(mvi, 2, -1)) {
|
|
mvi->regs_ex = mvi->regs + 0x10200;
|
|
mvi->regs += 0x20000;
|
|
if (mvi->id == 1)
|
|
mvi->regs += 0x4000;
|
|
return 0;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static void mvs_94xx_iounmap(struct mvs_info *mvi)
|
|
{
|
|
if (mvi->regs) {
|
|
mvi->regs -= 0x20000;
|
|
if (mvi->id == 1)
|
|
mvi->regs -= 0x4000;
|
|
mvs_iounmap(mvi->regs);
|
|
}
|
|
}
|
|
|
|
static void mvs_94xx_interrupt_enable(struct mvs_info *mvi)
|
|
{
|
|
void __iomem *regs = mvi->regs_ex;
|
|
u32 tmp;
|
|
|
|
tmp = mr32(MVS_GBL_CTL);
|
|
tmp |= (MVS_IRQ_SAS_A | MVS_IRQ_SAS_B);
|
|
mw32(MVS_GBL_INT_STAT, tmp);
|
|
writel(tmp, regs + 0x0C);
|
|
writel(tmp, regs + 0x10);
|
|
writel(tmp, regs + 0x14);
|
|
writel(tmp, regs + 0x18);
|
|
mw32(MVS_GBL_CTL, tmp);
|
|
}
|
|
|
|
static void mvs_94xx_interrupt_disable(struct mvs_info *mvi)
|
|
{
|
|
void __iomem *regs = mvi->regs_ex;
|
|
u32 tmp;
|
|
|
|
tmp = mr32(MVS_GBL_CTL);
|
|
|
|
tmp &= ~(MVS_IRQ_SAS_A | MVS_IRQ_SAS_B);
|
|
mw32(MVS_GBL_INT_STAT, tmp);
|
|
writel(tmp, regs + 0x0C);
|
|
writel(tmp, regs + 0x10);
|
|
writel(tmp, regs + 0x14);
|
|
writel(tmp, regs + 0x18);
|
|
mw32(MVS_GBL_CTL, tmp);
|
|
}
|
|
|
|
static u32 mvs_94xx_isr_status(struct mvs_info *mvi, int irq)
|
|
{
|
|
void __iomem *regs = mvi->regs_ex;
|
|
u32 stat = 0;
|
|
if (!(mvi->flags & MVF_FLAG_SOC)) {
|
|
stat = mr32(MVS_GBL_INT_STAT);
|
|
|
|
if (!(stat & (MVS_IRQ_SAS_A | MVS_IRQ_SAS_B)))
|
|
return 0;
|
|
}
|
|
return stat;
|
|
}
|
|
|
|
static irqreturn_t mvs_94xx_isr(struct mvs_info *mvi, int irq, u32 stat)
|
|
{
|
|
void __iomem *regs = mvi->regs;
|
|
|
|
if (((stat & MVS_IRQ_SAS_A) && mvi->id == 0) ||
|
|
((stat & MVS_IRQ_SAS_B) && mvi->id == 1)) {
|
|
mw32_f(MVS_INT_STAT, CINT_DONE);
|
|
|
|
spin_lock(&mvi->lock);
|
|
mvs_int_full(mvi);
|
|
spin_unlock(&mvi->lock);
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void mvs_94xx_command_active(struct mvs_info *mvi, u32 slot_idx)
|
|
{
|
|
u32 tmp;
|
|
tmp = mvs_cr32(mvi, MVS_COMMAND_ACTIVE+(slot_idx >> 3));
|
|
if (tmp && 1 << (slot_idx % 32)) {
|
|
mv_printk("command active %08X, slot [%x].\n", tmp, slot_idx);
|
|
mvs_cw32(mvi, MVS_COMMAND_ACTIVE + (slot_idx >> 3),
|
|
1 << (slot_idx % 32));
|
|
do {
|
|
tmp = mvs_cr32(mvi,
|
|
MVS_COMMAND_ACTIVE + (slot_idx >> 3));
|
|
} while (tmp & 1 << (slot_idx % 32));
|
|
}
|
|
}
|
|
|
|
void mvs_94xx_clear_srs_irq(struct mvs_info *mvi, u8 reg_set, u8 clear_all)
|
|
{
|
|
void __iomem *regs = mvi->regs;
|
|
u32 tmp;
|
|
|
|
if (clear_all) {
|
|
tmp = mr32(MVS_INT_STAT_SRS_0);
|
|
if (tmp) {
|
|
mv_dprintk("check SRS 0 %08X.\n", tmp);
|
|
mw32(MVS_INT_STAT_SRS_0, tmp);
|
|
}
|
|
tmp = mr32(MVS_INT_STAT_SRS_1);
|
|
if (tmp) {
|
|
mv_dprintk("check SRS 1 %08X.\n", tmp);
|
|
mw32(MVS_INT_STAT_SRS_1, tmp);
|
|
}
|
|
} else {
|
|
if (reg_set > 31)
|
|
tmp = mr32(MVS_INT_STAT_SRS_1);
|
|
else
|
|
tmp = mr32(MVS_INT_STAT_SRS_0);
|
|
|
|
if (tmp & (1 << (reg_set % 32))) {
|
|
mv_dprintk("register set 0x%x was stopped.\n", reg_set);
|
|
if (reg_set > 31)
|
|
mw32(MVS_INT_STAT_SRS_1, 1 << (reg_set % 32));
|
|
else
|
|
mw32(MVS_INT_STAT_SRS_0, 1 << (reg_set % 32));
|
|
}
|
|
}
|
|
}
|
|
|
|
static void mvs_94xx_issue_stop(struct mvs_info *mvi, enum mvs_port_type type,
|
|
u32 tfs)
|
|
{
|
|
void __iomem *regs = mvi->regs;
|
|
u32 tmp;
|
|
mvs_94xx_clear_srs_irq(mvi, 0, 1);
|
|
|
|
tmp = mr32(MVS_INT_STAT);
|
|
mw32(MVS_INT_STAT, tmp | CINT_CI_STOP);
|
|
tmp = mr32(MVS_PCS) | 0xFF00;
|
|
mw32(MVS_PCS, tmp);
|
|
}
|
|
|
|
static void mvs_94xx_non_spec_ncq_error(struct mvs_info *mvi)
|
|
{
|
|
void __iomem *regs = mvi->regs;
|
|
u32 err_0, err_1;
|
|
u8 i;
|
|
struct mvs_device *device;
|
|
|
|
err_0 = mr32(MVS_NON_NCQ_ERR_0);
|
|
err_1 = mr32(MVS_NON_NCQ_ERR_1);
|
|
|
|
mv_dprintk("non specific ncq error err_0:%x,err_1:%x.\n",
|
|
err_0, err_1);
|
|
for (i = 0; i < 32; i++) {
|
|
if (err_0 & bit(i)) {
|
|
device = mvs_find_dev_by_reg_set(mvi, i);
|
|
if (device)
|
|
mvs_release_task(mvi, device->sas_device);
|
|
}
|
|
if (err_1 & bit(i)) {
|
|
device = mvs_find_dev_by_reg_set(mvi, i+32);
|
|
if (device)
|
|
mvs_release_task(mvi, device->sas_device);
|
|
}
|
|
}
|
|
|
|
mw32(MVS_NON_NCQ_ERR_0, err_0);
|
|
mw32(MVS_NON_NCQ_ERR_1, err_1);
|
|
}
|
|
|
|
static void mvs_94xx_free_reg_set(struct mvs_info *mvi, u8 *tfs)
|
|
{
|
|
void __iomem *regs = mvi->regs;
|
|
u8 reg_set = *tfs;
|
|
|
|
if (*tfs == MVS_ID_NOT_MAPPED)
|
|
return;
|
|
|
|
mvi->sata_reg_set &= ~bit(reg_set);
|
|
if (reg_set < 32)
|
|
w_reg_set_enable(reg_set, (u32)mvi->sata_reg_set);
|
|
else
|
|
w_reg_set_enable(reg_set, (u32)(mvi->sata_reg_set >> 32));
|
|
|
|
*tfs = MVS_ID_NOT_MAPPED;
|
|
|
|
return;
|
|
}
|
|
|
|
static u8 mvs_94xx_assign_reg_set(struct mvs_info *mvi, u8 *tfs)
|
|
{
|
|
int i;
|
|
void __iomem *regs = mvi->regs;
|
|
|
|
if (*tfs != MVS_ID_NOT_MAPPED)
|
|
return 0;
|
|
|
|
i = mv_ffc64(mvi->sata_reg_set);
|
|
if (i >= 32) {
|
|
mvi->sata_reg_set |= bit(i);
|
|
w_reg_set_enable(i, (u32)(mvi->sata_reg_set >> 32));
|
|
*tfs = i;
|
|
return 0;
|
|
} else if (i >= 0) {
|
|
mvi->sata_reg_set |= bit(i);
|
|
w_reg_set_enable(i, (u32)mvi->sata_reg_set);
|
|
*tfs = i;
|
|
return 0;
|
|
}
|
|
return MVS_ID_NOT_MAPPED;
|
|
}
|
|
|
|
static void mvs_94xx_make_prd(struct scatterlist *scatter, int nr, void *prd)
|
|
{
|
|
int i;
|
|
struct scatterlist *sg;
|
|
struct mvs_prd *buf_prd = prd;
|
|
struct mvs_prd_imt im_len;
|
|
*(u32 *)&im_len = 0;
|
|
for_each_sg(scatter, sg, nr, i) {
|
|
buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
|
|
im_len.len = sg_dma_len(sg);
|
|
buf_prd->im_len = cpu_to_le32(*(u32 *)&im_len);
|
|
buf_prd++;
|
|
}
|
|
}
|
|
|
|
static int mvs_94xx_oob_done(struct mvs_info *mvi, int i)
|
|
{
|
|
u32 phy_st;
|
|
phy_st = mvs_read_phy_ctl(mvi, i);
|
|
if (phy_st & PHY_READY_MASK)
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
static void mvs_94xx_get_dev_identify_frame(struct mvs_info *mvi, int port_id,
|
|
struct sas_identify_frame *id)
|
|
{
|
|
int i;
|
|
u32 id_frame[7];
|
|
|
|
for (i = 0; i < 7; i++) {
|
|
mvs_write_port_cfg_addr(mvi, port_id,
|
|
CONFIG_ID_FRAME0 + i * 4);
|
|
id_frame[i] = cpu_to_le32(mvs_read_port_cfg_data(mvi, port_id));
|
|
}
|
|
memcpy(id, id_frame, 28);
|
|
}
|
|
|
|
static void mvs_94xx_get_att_identify_frame(struct mvs_info *mvi, int port_id,
|
|
struct sas_identify_frame *id)
|
|
{
|
|
int i;
|
|
u32 id_frame[7];
|
|
|
|
for (i = 0; i < 7; i++) {
|
|
mvs_write_port_cfg_addr(mvi, port_id,
|
|
CONFIG_ATT_ID_FRAME0 + i * 4);
|
|
id_frame[i] = cpu_to_le32(mvs_read_port_cfg_data(mvi, port_id));
|
|
mv_dprintk("94xx phy %d atta frame %d %x.\n",
|
|
port_id + mvi->id * mvi->chip->n_phy, i, id_frame[i]);
|
|
}
|
|
memcpy(id, id_frame, 28);
|
|
}
|
|
|
|
static u32 mvs_94xx_make_dev_info(struct sas_identify_frame *id)
|
|
{
|
|
u32 att_dev_info = 0;
|
|
|
|
att_dev_info |= id->dev_type;
|
|
if (id->stp_iport)
|
|
att_dev_info |= PORT_DEV_STP_INIT;
|
|
if (id->smp_iport)
|
|
att_dev_info |= PORT_DEV_SMP_INIT;
|
|
if (id->ssp_iport)
|
|
att_dev_info |= PORT_DEV_SSP_INIT;
|
|
if (id->stp_tport)
|
|
att_dev_info |= PORT_DEV_STP_TRGT;
|
|
if (id->smp_tport)
|
|
att_dev_info |= PORT_DEV_SMP_TRGT;
|
|
if (id->ssp_tport)
|
|
att_dev_info |= PORT_DEV_SSP_TRGT;
|
|
|
|
att_dev_info |= (u32)id->phy_id<<24;
|
|
return att_dev_info;
|
|
}
|
|
|
|
static u32 mvs_94xx_make_att_info(struct sas_identify_frame *id)
|
|
{
|
|
return mvs_94xx_make_dev_info(id);
|
|
}
|
|
|
|
static void mvs_94xx_fix_phy_info(struct mvs_info *mvi, int i,
|
|
struct sas_identify_frame *id)
|
|
{
|
|
struct mvs_phy *phy = &mvi->phy[i];
|
|
struct asd_sas_phy *sas_phy = &phy->sas_phy;
|
|
mv_dprintk("get all reg link rate is 0x%x\n", phy->phy_status);
|
|
sas_phy->linkrate =
|
|
(phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
|
|
PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET;
|
|
sas_phy->linkrate += 0x8;
|
|
mv_dprintk("get link rate is %d\n", sas_phy->linkrate);
|
|
phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
|
|
phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS;
|
|
mvs_94xx_get_dev_identify_frame(mvi, i, id);
|
|
phy->dev_info = mvs_94xx_make_dev_info(id);
|
|
|
|
if (phy->phy_type & PORT_TYPE_SAS) {
|
|
mvs_94xx_get_att_identify_frame(mvi, i, id);
|
|
phy->att_dev_info = mvs_94xx_make_att_info(id);
|
|
phy->att_dev_sas_addr = *(u64 *)id->sas_addr;
|
|
} else {
|
|
phy->att_dev_info = PORT_DEV_STP_TRGT | 1;
|
|
}
|
|
|
|
/* enable spin up bit */
|
|
mvs_write_port_cfg_addr(mvi, i, PHYR_PHY_STAT);
|
|
mvs_write_port_cfg_data(mvi, i, 0x04);
|
|
|
|
}
|
|
|
|
void mvs_94xx_phy_set_link_rate(struct mvs_info *mvi, u32 phy_id,
|
|
struct sas_phy_linkrates *rates)
|
|
{
|
|
u32 lrmax = 0;
|
|
u32 tmp;
|
|
|
|
tmp = mvs_read_phy_ctl(mvi, phy_id);
|
|
lrmax = (rates->maximum_linkrate - SAS_LINK_RATE_1_5_GBPS) << 12;
|
|
|
|
if (lrmax) {
|
|
tmp &= ~(0x3 << 12);
|
|
tmp |= lrmax;
|
|
}
|
|
mvs_write_phy_ctl(mvi, phy_id, tmp);
|
|
mvs_94xx_phy_reset(mvi, phy_id, PHY_RST_HARD);
|
|
}
|
|
|
|
static void mvs_94xx_clear_active_cmds(struct mvs_info *mvi)
|
|
{
|
|
u32 tmp;
|
|
void __iomem *regs = mvi->regs;
|
|
tmp = mr32(MVS_STP_REG_SET_0);
|
|
mw32(MVS_STP_REG_SET_0, 0);
|
|
mw32(MVS_STP_REG_SET_0, tmp);
|
|
tmp = mr32(MVS_STP_REG_SET_1);
|
|
mw32(MVS_STP_REG_SET_1, 0);
|
|
mw32(MVS_STP_REG_SET_1, tmp);
|
|
}
|
|
|
|
|
|
u32 mvs_94xx_spi_read_data(struct mvs_info *mvi)
|
|
{
|
|
void __iomem *regs = mvi->regs_ex - 0x10200;
|
|
return mr32(SPI_RD_DATA_REG_94XX);
|
|
}
|
|
|
|
void mvs_94xx_spi_write_data(struct mvs_info *mvi, u32 data)
|
|
{
|
|
void __iomem *regs = mvi->regs_ex - 0x10200;
|
|
mw32(SPI_RD_DATA_REG_94XX, data);
|
|
}
|
|
|
|
|
|
int mvs_94xx_spi_buildcmd(struct mvs_info *mvi,
|
|
u32 *dwCmd,
|
|
u8 cmd,
|
|
u8 read,
|
|
u8 length,
|
|
u32 addr
|
|
)
|
|
{
|
|
void __iomem *regs = mvi->regs_ex - 0x10200;
|
|
u32 dwTmp;
|
|
|
|
dwTmp = ((u32)cmd << 8) | ((u32)length << 4);
|
|
if (read)
|
|
dwTmp |= SPI_CTRL_READ_94XX;
|
|
|
|
if (addr != MV_MAX_U32) {
|
|
mw32(SPI_ADDR_REG_94XX, (addr & 0x0003FFFFL));
|
|
dwTmp |= SPI_ADDR_VLD_94XX;
|
|
}
|
|
|
|
*dwCmd = dwTmp;
|
|
return 0;
|
|
}
|
|
|
|
|
|
int mvs_94xx_spi_issuecmd(struct mvs_info *mvi, u32 cmd)
|
|
{
|
|
void __iomem *regs = mvi->regs_ex - 0x10200;
|
|
mw32(SPI_CTRL_REG_94XX, cmd | SPI_CTRL_SpiStart_94XX);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mvs_94xx_spi_waitdataready(struct mvs_info *mvi, u32 timeout)
|
|
{
|
|
void __iomem *regs = mvi->regs_ex - 0x10200;
|
|
u32 i, dwTmp;
|
|
|
|
for (i = 0; i < timeout; i++) {
|
|
dwTmp = mr32(SPI_CTRL_REG_94XX);
|
|
if (!(dwTmp & SPI_CTRL_SpiStart_94XX))
|
|
return 0;
|
|
msleep(10);
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
void mvs_94xx_fix_dma(struct mvs_info *mvi, u32 phy_mask,
|
|
int buf_len, int from, void *prd)
|
|
{
|
|
int i;
|
|
struct mvs_prd *buf_prd = prd;
|
|
dma_addr_t buf_dma;
|
|
struct mvs_prd_imt im_len;
|
|
|
|
*(u32 *)&im_len = 0;
|
|
buf_prd += from;
|
|
|
|
#define PRD_CHAINED_ENTRY 0x01
|
|
if ((mvi->pdev->revision == VANIR_A0_REV) ||
|
|
(mvi->pdev->revision == VANIR_B0_REV))
|
|
buf_dma = (phy_mask <= 0x08) ?
|
|
mvi->bulk_buffer_dma : mvi->bulk_buffer_dma1;
|
|
else
|
|
return;
|
|
|
|
for (i = from; i < MAX_SG_ENTRY; i++, ++buf_prd) {
|
|
if (i == MAX_SG_ENTRY - 1) {
|
|
buf_prd->addr = cpu_to_le64(virt_to_phys(buf_prd - 1));
|
|
im_len.len = 2;
|
|
im_len.misc_ctl = PRD_CHAINED_ENTRY;
|
|
} else {
|
|
buf_prd->addr = cpu_to_le64(buf_dma);
|
|
im_len.len = buf_len;
|
|
}
|
|
buf_prd->im_len = cpu_to_le32(*(u32 *)&im_len);
|
|
}
|
|
}
|
|
|
|
static void mvs_94xx_tune_interrupt(struct mvs_info *mvi, u32 time)
|
|
{
|
|
void __iomem *regs = mvi->regs;
|
|
u32 tmp = 0;
|
|
/*
|
|
* the max count is 0x1ff, while our max slot is 0x200,
|
|
* it will make count 0.
|
|
*/
|
|
if (time == 0) {
|
|
mw32(MVS_INT_COAL, 0);
|
|
mw32(MVS_INT_COAL_TMOUT, 0x10000);
|
|
} else {
|
|
if (MVS_CHIP_SLOT_SZ > 0x1ff)
|
|
mw32(MVS_INT_COAL, 0x1ff|COAL_EN);
|
|
else
|
|
mw32(MVS_INT_COAL, MVS_CHIP_SLOT_SZ|COAL_EN);
|
|
|
|
tmp = 0x10000 | time;
|
|
mw32(MVS_INT_COAL_TMOUT, tmp);
|
|
}
|
|
|
|
}
|
|
|
|
static int mvs_94xx_gpio_write(struct mvs_prv_info *mvs_prv,
|
|
u8 reg_type, u8 reg_index,
|
|
u8 reg_count, u8 *write_data)
|
|
{
|
|
int i;
|
|
|
|
switch (reg_type) {
|
|
|
|
case SAS_GPIO_REG_TX_GP:
|
|
if (reg_index == 0)
|
|
return -EINVAL;
|
|
|
|
if (reg_count > 1)
|
|
return -EINVAL;
|
|
|
|
if (reg_count == 0)
|
|
return 0;
|
|
|
|
/* maximum supported bits = hosts * 4 drives * 3 bits */
|
|
for (i = 0; i < mvs_prv->n_host * 4 * 3; i++) {
|
|
|
|
/* select host */
|
|
struct mvs_info *mvi = mvs_prv->mvi[i/(4*3)];
|
|
|
|
void __iomem *regs = mvi->regs_ex - 0x10200;
|
|
|
|
int drive = (i/3) & (4-1); /* drive number on host */
|
|
u32 block = mr32(MVS_SGPIO_DCTRL +
|
|
MVS_SGPIO_HOST_OFFSET * mvi->id);
|
|
|
|
|
|
/*
|
|
* if bit is set then create a mask with the first
|
|
* bit of the drive set in the mask ...
|
|
*/
|
|
u32 bit = (write_data[i/8] & (1 << (i&(8-1)))) ?
|
|
1<<(24-drive*8) : 0;
|
|
|
|
/*
|
|
* ... and then shift it to the right position based
|
|
* on the led type (activity/id/fail)
|
|
*/
|
|
switch (i%3) {
|
|
case 0: /* activity */
|
|
block &= ~((0x7 << MVS_SGPIO_DCTRL_ACT_SHIFT)
|
|
<< (24-drive*8));
|
|
/* hardwire activity bit to SOF */
|
|
block |= LED_BLINKA_SOF << (
|
|
MVS_SGPIO_DCTRL_ACT_SHIFT +
|
|
(24-drive*8));
|
|
break;
|
|
case 1: /* id */
|
|
block &= ~((0x3 << MVS_SGPIO_DCTRL_LOC_SHIFT)
|
|
<< (24-drive*8));
|
|
block |= bit << MVS_SGPIO_DCTRL_LOC_SHIFT;
|
|
break;
|
|
case 2: /* fail */
|
|
block &= ~((0x7 << MVS_SGPIO_DCTRL_ERR_SHIFT)
|
|
<< (24-drive*8));
|
|
block |= bit << MVS_SGPIO_DCTRL_ERR_SHIFT;
|
|
break;
|
|
}
|
|
|
|
mw32(MVS_SGPIO_DCTRL + MVS_SGPIO_HOST_OFFSET * mvi->id,
|
|
block);
|
|
|
|
}
|
|
|
|
return reg_count;
|
|
|
|
case SAS_GPIO_REG_TX:
|
|
if (reg_index + reg_count > mvs_prv->n_host)
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < reg_count; i++) {
|
|
struct mvs_info *mvi = mvs_prv->mvi[i+reg_index];
|
|
void __iomem *regs = mvi->regs_ex - 0x10200;
|
|
|
|
mw32(MVS_SGPIO_DCTRL + MVS_SGPIO_HOST_OFFSET * mvi->id,
|
|
be32_to_cpu(((u32 *) write_data)[i]));
|
|
}
|
|
return reg_count;
|
|
}
|
|
return -ENOSYS;
|
|
}
|
|
|
|
const struct mvs_dispatch mvs_94xx_dispatch = {
|
|
"mv94xx",
|
|
mvs_94xx_init,
|
|
NULL,
|
|
mvs_94xx_ioremap,
|
|
mvs_94xx_iounmap,
|
|
mvs_94xx_isr,
|
|
mvs_94xx_isr_status,
|
|
mvs_94xx_interrupt_enable,
|
|
mvs_94xx_interrupt_disable,
|
|
mvs_read_phy_ctl,
|
|
mvs_write_phy_ctl,
|
|
mvs_read_port_cfg_data,
|
|
mvs_write_port_cfg_data,
|
|
mvs_write_port_cfg_addr,
|
|
mvs_read_port_vsr_data,
|
|
mvs_write_port_vsr_data,
|
|
mvs_write_port_vsr_addr,
|
|
mvs_read_port_irq_stat,
|
|
mvs_write_port_irq_stat,
|
|
mvs_read_port_irq_mask,
|
|
mvs_write_port_irq_mask,
|
|
mvs_94xx_command_active,
|
|
mvs_94xx_clear_srs_irq,
|
|
mvs_94xx_issue_stop,
|
|
mvs_start_delivery,
|
|
mvs_rx_update,
|
|
mvs_int_full,
|
|
mvs_94xx_assign_reg_set,
|
|
mvs_94xx_free_reg_set,
|
|
mvs_get_prd_size,
|
|
mvs_get_prd_count,
|
|
mvs_94xx_make_prd,
|
|
mvs_94xx_detect_porttype,
|
|
mvs_94xx_oob_done,
|
|
mvs_94xx_fix_phy_info,
|
|
NULL,
|
|
mvs_94xx_phy_set_link_rate,
|
|
mvs_hw_max_link_rate,
|
|
mvs_94xx_phy_disable,
|
|
mvs_94xx_phy_enable,
|
|
mvs_94xx_phy_reset,
|
|
NULL,
|
|
mvs_94xx_clear_active_cmds,
|
|
mvs_94xx_spi_read_data,
|
|
mvs_94xx_spi_write_data,
|
|
mvs_94xx_spi_buildcmd,
|
|
mvs_94xx_spi_issuecmd,
|
|
mvs_94xx_spi_waitdataready,
|
|
mvs_94xx_fix_dma,
|
|
mvs_94xx_tune_interrupt,
|
|
mvs_94xx_non_spec_ncq_error,
|
|
mvs_94xx_gpio_write,
|
|
};
|
|
|