linux/drivers/of/property.c
Linus Torvalds 1b294a1f35 Networking changes for 6.10.
Core & protocols
 ----------------
 
  - Complete rework of garbage collection of AF_UNIX sockets.
    AF_UNIX is prone to forming reference count cycles due to fd passing
    functionality. New method based on Tarjan's Strongly Connected Components
    algorithm should be both faster and remove a lot of workarounds
    we accumulated over the years.
 
  - Add TCP fraglist GRO support, allowing chaining multiple TCP packets
    and forwarding them together. Useful for small switches / routers which
    lack basic checksum offload in some scenarios (e.g. PPPoE).
 
  - Support using SMP threads for handling packet backlog i.e. packet
    processing from software interfaces and old drivers which don't
    use NAPI. This helps move the processing out of the softirq jumble.
 
  - Continue work of converting from rtnl lock to RCU protection.
    Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address
    labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files,
    MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs,
    neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link
    information available via rtnetlink.
 
  - Small optimizations from Eric to UDP wake up handling, memory accounting,
    RPS/RFS implementation, TCP packet sizing etc.
 
  - Allow direct page recycling in the bulk API used by XDP, for +2% PPS.
 
  - Support peek with an offset on TCP sockets.
 
  - Add MPTCP APIs for querying last time packets were received/sent/acked,
    and whether MPTCP "upgrade" succeeded on a TCP socket.
 
  - Add intra-node communication shortcut to improve SMC performance.
 
  - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver.
 
  - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
 
  - Add reset reasons for tracing what caused a TCP reset to be sent.
 
  - Introduce direction attribute for xfrm (IPSec) states.
    State can be used either for input or output packet processing.
 
 Things we sprinkled into general kernel code
 --------------------------------------------
 
  - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
    This required touch-ups and renaming of a few existing users.
 
  - Add Endian-dependent __counted_by_{le,be} annotations.
 
  - Make building selftests "quieter" by printing summaries like
    "CC object.o" rather than full commands with all the arguments.
 
 Netfilter
 ---------
 
  - Use GFP_KERNEL to clone elements, to deal better with OOM situations
    and avoid failures in the .commit step.
 
 BPF
 ---
 
  - Add eBPF JIT for ARCv2 CPUs.
 
  - Support attaching kprobe BPF programs through kprobe_multi link in
    a session mode, meaning, a BPF program is attached to both function entry
    and return, the entry program can decide if the return program gets
    executed and the entry program can share u64 cookie value with return
    program. "Session mode" is a common use-case for tetragon and bpftrace.
 
  - Add the ability to specify and retrieve BPF cookie for raw tracepoint
    programs in order to ease migration from classic to raw tracepoints.
 
  - Add an internal-only BPF per-CPU instruction for resolving per-CPU
    memory addresses and implement support in x86, ARM64 and RISC-V JITs.
    This allows inlining functions which need to access per-CPU state.
 
  - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
    atomics in bpf_arena which can be JITed as a single x86 instruction.
    Support BPF arena on ARM64.
 
  - Add a new bpf_wq API for deferring events and refactor process-context
    bpf_timer code to keep common code where possible.
 
  - Harden the BPF verifier's and/or/xor value tracking.
 
  - Introduce crypto kfuncs to let BPF programs call kernel crypto APIs.
 
  - Support bpf_tail_call_static() helper for BPF programs with GCC 13.
 
  - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
    program to have code sections where preemption is disabled.
 
 Driver API
 ----------
 
  - Skip software TC processing completely if all installed rules are
    marked as HW-only, instead of checking the HW-only flag rule by rule.
 
  - Add support for configuring PoE (Power over Ethernet), similar to
    the already existing support for PoDL (Power over Data Line) config.
 
  - Initial bits of a queue control API, for now allowing a single queue
    to be reset without disturbing packet flow to other queues.
 
  - Common (ethtool) statistics for hardware timestamping.
 
 Tests and tooling
 -----------------
 
  - Remove the need to create a config file to run the net forwarding tests
    so that a naive "make run_tests" can exercise them.
 
  - Define a method of writing tests which require an external endpoint
    to communicate with (to send/receive data towards the test machine).
    Add a few such tests.
 
  - Create a shared code library for writing Python tests. Expose the YAML
    Netlink library from tools/ to the tests for easy Netlink access.
 
  - Move netfilter tests under net/, extend them, separate performance tests
    from correctness tests, and iron out issues found by running them
    "on every commit".
 
  - Refactor BPF selftests to use common network helpers.
 
  - Further work filling in YAML definitions of Netlink messages for:
    nftables, team driver, bonding interfaces, vlan interfaces, VF info,
    TC u32 mark, TC police action.
 
  - Teach Python YAML Netlink to decode attribute policies.
 
  - Extend the definition of the "indexed array" construct in the specs
    to cover arrays of scalars rather than just nests.
 
  - Add hyperlinks between definitions in generated Netlink docs.
 
 Drivers
 -------
 
  - Make sure unsupported flower control flags are rejected by drivers,
    and make more drivers report errors directly to the application rather
    than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen).
 
  - Ethernet high-speed NICs:
    - Broadcom (bnxt):
      - support multiple RSS contexts and steering traffic to them
      - support XDP metadata
      - make page pool allocations more NUMA aware
    - Intel (100G, ice, idpf):
      - extract datapath code common among Intel drivers into a library
      - use fewer resources in switchdev by sharing queues with the PF
      - add PFCP filter support
      - add Ethernet filter support
      - use a spinlock instead of HW lock in PTP clock ops
      - support 5 layer Tx scheduler topology
    - nVidia/Mellanox:
      - 800G link modes and 100G SerDes speeds
      - per-queue IRQ coalescing configuration
    - Marvell Octeon:
      - support offloading TC packet mark action
 
  - Ethernet NICs consumer, embedded and virtual:
    - stop lying about skb->truesize in USB Ethernet drivers, it messes up
      TCP memory calculations
    - Google cloud vNIC:
      - support changing ring size via ethtool
      - support ring reset using the queue control API
    - VirtIO net:
      - expose flow hash from RSS to XDP
      - per-queue statistics
      - add selftests
    - Synopsys (stmmac):
      - support controllers which require an RX clock signal from the MII
        bus to perform their hardware initialization
    - TI:
      - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
      - icssg_prueth: add SW TX / RX Coalescing based on hrtimers
      - cpsw: minimal XDP support
    - Renesas (ravb):
      - support describing the MDIO bus
    - Realtek (r8169):
      - add support for RTL8168M
    - Microchip Sparx5:
      - matchall and flower actions mirred and redirect
 
  - Ethernet switches:
    - nVidia/Mellanox:
      - improve events processing performance
    - Marvell:
      - add support for MV88E6250 family internal PHYs
    - Microchip:
      - add DCB and DSCP mapping support for KSZ switches
      - vsc73xx: convert to PHYLINK
    - Realtek:
      - rtl8226b/rtl8221b: add C45 instances and SerDes switching
 
  - Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup.
 
  - Ethernet PHYs:
    - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
    - micrel: lan8814: add support for PPS out and external timestamp trigger
 
  - WiFi:
    - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers.
      Modern devices can only be configured using nl80211.
    - mac80211/cfg80211
      - handle color change per link for WiFi 7 Multi-Link Operation
    - Intel (iwlwifi):
      - don't support puncturing in 5 GHz
      - support monitor mode on passive channels
      - BZ-W device support
      - P2P with HE/EHT support
      - re-add support for firmware API 90
      - provide channel survey information for Automatic Channel Selection
    - MediaTek (mt76):
      - mt7921 LED control
      - mt7925 EHT radiotap support
      - mt7920e PCI support
    - Qualcomm (ath11k):
      - P2P support for QCA6390, WCN6855 and QCA2066
      - support hibernation
      - ieee80211-freq-limit Device Tree property support
    - Qualcomm (ath12k):
      - refactoring in preparation of multi-link support
      - suspend and hibernation support
      - ACPI support
      - debugfs support, including dfs_simulate_radar support
    - RealTek:
      - rtw88: RTL8723CS SDIO device support
      - rtw89: RTL8922AE Wi-Fi 7 PCI device support
      - rtw89: complete features of new WiFi 7 chip 8922AE including
        BT-coexistence and Wake-on-WLAN
      - rtw89: use BIOS ACPI settings to set TX power and channels
      - rtl8xxxu: enable Management Frame Protection (MFP) support
 
  - Bluetooth:
    - support for Intel BlazarI and Filmore Peak2 (BE201)
    - support for MediaTek MT7921S SDIO
    - initial support for Intel PCIe BT driver
    - remove HCI_AMP support
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmZD6sQACgkQMUZtbf5S
 IrtLYw/+I73ePGIye37o2jpbodcLAUZVfF3r6uYUzK8hokEcKD0QVJa9w7PizLZ3
 UO45ClOXFLJCkfP4reFenLfxGCel2AJI+F7VFl2xaO2XgrcH/lnVrHqKZEAEXjls
 KoYMnShIolv7h2MKP6hHtyTi2j1wvQUKsZC71o9/fuW+4fUT8gECx1YtYcL73wrw
 gEMdlUgBYC3jiiCUHJIFX6iPJ2t/TC+q1eIIF2K/Osrk2kIqQhzoozcL4vpuAZQT
 99ljx/qRelXa8oppDb7nM5eulg7WY8ZqxEfFZphTMC5nLEGzClxuOTTl2kDYI/D/
 UZmTWZDY+F5F0xvNk2gH84qVJXBOVDoobpT7hVA/tDuybobc/kvGDzRayEVqVzKj
 Q0tPlJs+xBZpkK5TVnxaFLJVOM+p1Xosxy3kNVXmuYNBvT/R89UbJiCrUKqKZF+L
 z/1mOYUv8UklHqYAeuJSptHvqJjTGa/fsEYP7dAUBbc1N2eVB8mzZ4mgU5rYXbtC
 E6UXXiWnoSRm8bmco9QmcWWoXt5UGEizHSJLz6t1R5Df/YmXhWlytll5aCwY1ksf
 FNoL7S4u7AZThL1Nwi7yUs4CAjhk/N4aOsk+41S0sALCx30BJuI6UdesAxJ0lu+Z
 fwCQYbs27y4p7mBLbkYwcQNxAxGm7PSK4yeyRIy2njiyV4qnLf8=
 =EsC2
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Complete rework of garbage collection of AF_UNIX sockets.

     AF_UNIX is prone to forming reference count cycles due to fd
     passing functionality. New method based on Tarjan's Strongly
     Connected Components algorithm should be both faster and remove a
     lot of workarounds we accumulated over the years.

   - Add TCP fraglist GRO support, allowing chaining multiple TCP
     packets and forwarding them together. Useful for small switches /
     routers which lack basic checksum offload in some scenarios (e.g.
     PPPoE).

   - Support using SMP threads for handling packet backlog i.e. packet
     processing from software interfaces and old drivers which don't use
     NAPI. This helps move the processing out of the softirq jumble.

   - Continue work of converting from rtnl lock to RCU protection.

     Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
     address labels, netdev threaded NAPI sysfs files, bonding driver's
     sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
     TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
     of the link information available via rtnetlink.

   - Small optimizations from Eric to UDP wake up handling, memory
     accounting, RPS/RFS implementation, TCP packet sizing etc.

   - Allow direct page recycling in the bulk API used by XDP, for +2%
     PPS.

   - Support peek with an offset on TCP sockets.

   - Add MPTCP APIs for querying last time packets were received/sent/acked
     and whether MPTCP "upgrade" succeeded on a TCP socket.

   - Add intra-node communication shortcut to improve SMC performance.

   - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
     driver.

   - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.

   - Add reset reasons for tracing what caused a TCP reset to be sent.

   - Introduce direction attribute for xfrm (IPSec) states. State can be
     used either for input or output packet processing.

  Things we sprinkled into general kernel code:

   - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().

     This required touch-ups and renaming of a few existing users.

   - Add Endian-dependent __counted_by_{le,be} annotations.

   - Make building selftests "quieter" by printing summaries like
     "CC object.o" rather than full commands with all the arguments.

  Netfilter:

   - Use GFP_KERNEL to clone elements, to deal better with OOM
     situations and avoid failures in the .commit step.

  BPF:

   - Add eBPF JIT for ARCv2 CPUs.

   - Support attaching kprobe BPF programs through kprobe_multi link in
     a session mode, meaning, a BPF program is attached to both function
     entry and return, the entry program can decide if the return
     program gets executed and the entry program can share u64 cookie
     value with return program. "Session mode" is a common use-case for
     tetragon and bpftrace.

   - Add the ability to specify and retrieve BPF cookie for raw
     tracepoint programs in order to ease migration from classic to raw
     tracepoints.

   - Add an internal-only BPF per-CPU instruction for resolving per-CPU
     memory addresses and implement support in x86, ARM64 and RISC-V
     JITs. This allows inlining functions which need to access per-CPU
     state.

   - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
     atomics in bpf_arena which can be JITed as a single x86
     instruction. Support BPF arena on ARM64.

   - Add a new bpf_wq API for deferring events and refactor
     process-context bpf_timer code to keep common code where possible.

   - Harden the BPF verifier's and/or/xor value tracking.

   - Introduce crypto kfuncs to let BPF programs call kernel crypto
     APIs.

   - Support bpf_tail_call_static() helper for BPF programs with GCC 13.

   - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
     program to have code sections where preemption is disabled.

  Driver API:

   - Skip software TC processing completely if all installed rules are
     marked as HW-only, instead of checking the HW-only flag rule by
     rule.

   - Add support for configuring PoE (Power over Ethernet), similar to
     the already existing support for PoDL (Power over Data Line)
     config.

   - Initial bits of a queue control API, for now allowing a single
     queue to be reset without disturbing packet flow to other queues.

   - Common (ethtool) statistics for hardware timestamping.

  Tests and tooling:

   - Remove the need to create a config file to run the net forwarding
     tests so that a naive "make run_tests" can exercise them.

   - Define a method of writing tests which require an external endpoint
     to communicate with (to send/receive data towards the test
     machine). Add a few such tests.

   - Create a shared code library for writing Python tests. Expose the
     YAML Netlink library from tools/ to the tests for easy Netlink
     access.

   - Move netfilter tests under net/, extend them, separate performance
     tests from correctness tests, and iron out issues found by running
     them "on every commit".

   - Refactor BPF selftests to use common network helpers.

   - Further work filling in YAML definitions of Netlink messages for:
     nftables, team driver, bonding interfaces, vlan interfaces, VF
     info, TC u32 mark, TC police action.

   - Teach Python YAML Netlink to decode attribute policies.

   - Extend the definition of the "indexed array" construct in the specs
     to cover arrays of scalars rather than just nests.

   - Add hyperlinks between definitions in generated Netlink docs.

  Drivers:

   - Make sure unsupported flower control flags are rejected by drivers,
     and make more drivers report errors directly to the application
     rather than dmesg (large number of driver changes from Asbjørn
     Sloth Tønnesen).

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support multiple RSS contexts and steering traffic to them
         - support XDP metadata
         - make page pool allocations more NUMA aware
      - Intel (100G, ice, idpf):
         - extract datapath code common among Intel drivers into a library
         - use fewer resources in switchdev by sharing queues with the PF
         - add PFCP filter support
         - add Ethernet filter support
         - use a spinlock instead of HW lock in PTP clock ops
         - support 5 layer Tx scheduler topology
      - nVidia/Mellanox:
         - 800G link modes and 100G SerDes speeds
         - per-queue IRQ coalescing configuration
      - Marvell Octeon:
         - support offloading TC packet mark action

   - Ethernet NICs consumer, embedded and virtual:
      - stop lying about skb->truesize in USB Ethernet drivers, it
        messes up TCP memory calculations
      - Google cloud vNIC:
         - support changing ring size via ethtool
         - support ring reset using the queue control API
      - VirtIO net:
         - expose flow hash from RSS to XDP
         - per-queue statistics
         - add selftests
      - Synopsys (stmmac):
         - support controllers which require an RX clock signal from the
           MII bus to perform their hardware initialization
      - TI:
         - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
         - icssg_prueth: add SW TX / RX Coalescing based on hrtimers
         - cpsw: minimal XDP support
      - Renesas (ravb):
         - support describing the MDIO bus
      - Realtek (r8169):
         - add support for RTL8168M
      - Microchip Sparx5:
         - matchall and flower actions mirred and redirect

   - Ethernet switches:
      - nVidia/Mellanox:
         - improve events processing performance
      - Marvell:
         - add support for MV88E6250 family internal PHYs
      - Microchip:
         - add DCB and DSCP mapping support for KSZ switches
         - vsc73xx: convert to PHYLINK
      - Realtek:
         - rtl8226b/rtl8221b: add C45 instances and SerDes switching

   - Many driver changes related to PHYLIB and PHYLINK deprecated API
     cleanup

   - Ethernet PHYs:
      - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
      - micrel: lan8814: add support for PPS out and external timestamp trigger

   - WiFi:
      - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
        drivers. Modern devices can only be configured using nl80211.
      - mac80211/cfg80211
         - handle color change per link for WiFi 7 Multi-Link Operation
      - Intel (iwlwifi):
         - don't support puncturing in 5 GHz
         - support monitor mode on passive channels
         - BZ-W device support
         - P2P with HE/EHT support
         - re-add support for firmware API 90
         - provide channel survey information for Automatic Channel Selection
      - MediaTek (mt76):
         - mt7921 LED control
         - mt7925 EHT radiotap support
         - mt7920e PCI support
      - Qualcomm (ath11k):
         - P2P support for QCA6390, WCN6855 and QCA2066
         - support hibernation
         - ieee80211-freq-limit Device Tree property support
      - Qualcomm (ath12k):
         - refactoring in preparation of multi-link support
         - suspend and hibernation support
         - ACPI support
         - debugfs support, including dfs_simulate_radar support
      - RealTek:
         - rtw88: RTL8723CS SDIO device support
         - rtw89: RTL8922AE Wi-Fi 7 PCI device support
         - rtw89: complete features of new WiFi 7 chip 8922AE including
           BT-coexistence and Wake-on-WLAN
         - rtw89: use BIOS ACPI settings to set TX power and channels
         - rtl8xxxu: enable Management Frame Protection (MFP) support

   - Bluetooth:
      - support for Intel BlazarI and Filmore Peak2 (BE201)
      - support for MediaTek MT7921S SDIO
      - initial support for Intel PCIe BT driver
      - remove HCI_AMP support"

* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
  selftests: netfilter: fix packetdrill conntrack testcase
  net: gro: fix napi_gro_cb zeroed alignment
  Bluetooth: btintel_pcie: Refactor and code cleanup
  Bluetooth: btintel_pcie: Fix warning reported by sparse
  Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
  Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
  Bluetooth: btintel_pcie: Fix compiler warnings
  Bluetooth: btintel_pcie: Add *setup* function to download firmware
  Bluetooth: btintel_pcie: Add support for PCIe transport
  Bluetooth: btintel: Export few static functions
  Bluetooth: HCI: Remove HCI_AMP support
  Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
  Bluetooth: qca: Fix error code in qca_read_fw_build_info()
  Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
  Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
  Bluetooth: btintel: Add support for BlazarI
  LE Create Connection command timeout increased to 20 secs
  dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
  Bluetooth: compute LE flow credits based on recvbuf space
  Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
  ...
2024-05-14 19:42:24 -07:00

1483 lines
42 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* drivers/of/property.c - Procedures for accessing and interpreting
* Devicetree properties and graphs.
*
* Initially created by copying procedures from drivers/of/base.c. This
* file contains the OF property as well as the OF graph interface
* functions.
*
* Paul Mackerras August 1996.
* Copyright (C) 1996-2005 Paul Mackerras.
*
* Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
* {engebret|bergner}@us.ibm.com
*
* Adapted for sparc and sparc64 by David S. Miller davem@davemloft.net
*
* Reconsolidated from arch/x/kernel/prom.c by Stephen Rothwell and
* Grant Likely.
*/
#define pr_fmt(fmt) "OF: " fmt
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_graph.h>
#include <linux/of_irq.h>
#include <linux/string.h>
#include <linux/moduleparam.h>
#include "of_private.h"
/**
* of_graph_is_present() - check graph's presence
* @node: pointer to device_node containing graph port
*
* Return: True if @node has a port or ports (with a port) sub-node,
* false otherwise.
*/
bool of_graph_is_present(const struct device_node *node)
{
struct device_node *ports, *port;
ports = of_get_child_by_name(node, "ports");
if (ports)
node = ports;
port = of_get_child_by_name(node, "port");
of_node_put(ports);
of_node_put(port);
return !!port;
}
EXPORT_SYMBOL(of_graph_is_present);
/**
* of_property_count_elems_of_size - Count the number of elements in a property
*
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @elem_size: size of the individual element
*
* Search for a property in a device node and count the number of elements of
* size elem_size in it.
*
* Return: The number of elements on sucess, -EINVAL if the property does not
* exist or its length does not match a multiple of elem_size and -ENODATA if
* the property does not have a value.
*/
int of_property_count_elems_of_size(const struct device_node *np,
const char *propname, int elem_size)
{
struct property *prop = of_find_property(np, propname, NULL);
if (!prop)
return -EINVAL;
if (!prop->value)
return -ENODATA;
if (prop->length % elem_size != 0) {
pr_err("size of %s in node %pOF is not a multiple of %d\n",
propname, np, elem_size);
return -EINVAL;
}
return prop->length / elem_size;
}
EXPORT_SYMBOL_GPL(of_property_count_elems_of_size);
/**
* of_find_property_value_of_size
*
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @min: minimum allowed length of property value
* @max: maximum allowed length of property value (0 means unlimited)
* @len: if !=NULL, actual length is written to here
*
* Search for a property in a device node and valid the requested size.
*
* Return: The property value on success, -EINVAL if the property does not
* exist, -ENODATA if property does not have a value, and -EOVERFLOW if the
* property data is too small or too large.
*
*/
static void *of_find_property_value_of_size(const struct device_node *np,
const char *propname, u32 min, u32 max, size_t *len)
{
struct property *prop = of_find_property(np, propname, NULL);
if (!prop)
return ERR_PTR(-EINVAL);
if (!prop->value)
return ERR_PTR(-ENODATA);
if (prop->length < min)
return ERR_PTR(-EOVERFLOW);
if (max && prop->length > max)
return ERR_PTR(-EOVERFLOW);
if (len)
*len = prop->length;
return prop->value;
}
/**
* of_property_read_u32_index - Find and read a u32 from a multi-value property.
*
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @index: index of the u32 in the list of values
* @out_value: pointer to return value, modified only if no error.
*
* Search for a property in a device node and read nth 32-bit value from
* it.
*
* Return: 0 on success, -EINVAL if the property does not exist,
* -ENODATA if property does not have a value, and -EOVERFLOW if the
* property data isn't large enough.
*
* The out_value is modified only if a valid u32 value can be decoded.
*/
int of_property_read_u32_index(const struct device_node *np,
const char *propname,
u32 index, u32 *out_value)
{
const u32 *val = of_find_property_value_of_size(np, propname,
((index + 1) * sizeof(*out_value)),
0,
NULL);
if (IS_ERR(val))
return PTR_ERR(val);
*out_value = be32_to_cpup(((__be32 *)val) + index);
return 0;
}
EXPORT_SYMBOL_GPL(of_property_read_u32_index);
/**
* of_property_read_u64_index - Find and read a u64 from a multi-value property.
*
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @index: index of the u64 in the list of values
* @out_value: pointer to return value, modified only if no error.
*
* Search for a property in a device node and read nth 64-bit value from
* it.
*
* Return: 0 on success, -EINVAL if the property does not exist,
* -ENODATA if property does not have a value, and -EOVERFLOW if the
* property data isn't large enough.
*
* The out_value is modified only if a valid u64 value can be decoded.
*/
int of_property_read_u64_index(const struct device_node *np,
const char *propname,
u32 index, u64 *out_value)
{
const u64 *val = of_find_property_value_of_size(np, propname,
((index + 1) * sizeof(*out_value)),
0, NULL);
if (IS_ERR(val))
return PTR_ERR(val);
*out_value = be64_to_cpup(((__be64 *)val) + index);
return 0;
}
EXPORT_SYMBOL_GPL(of_property_read_u64_index);
/**
* of_property_read_variable_u8_array - Find and read an array of u8 from a
* property, with bounds on the minimum and maximum array size.
*
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @out_values: pointer to found values.
* @sz_min: minimum number of array elements to read
* @sz_max: maximum number of array elements to read, if zero there is no
* upper limit on the number of elements in the dts entry but only
* sz_min will be read.
*
* Search for a property in a device node and read 8-bit value(s) from
* it.
*
* dts entry of array should be like:
* ``property = /bits/ 8 <0x50 0x60 0x70>;``
*
* Return: The number of elements read on success, -EINVAL if the property
* does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
* if the property data is smaller than sz_min or longer than sz_max.
*
* The out_values is modified only if a valid u8 value can be decoded.
*/
int of_property_read_variable_u8_array(const struct device_node *np,
const char *propname, u8 *out_values,
size_t sz_min, size_t sz_max)
{
size_t sz, count;
const u8 *val = of_find_property_value_of_size(np, propname,
(sz_min * sizeof(*out_values)),
(sz_max * sizeof(*out_values)),
&sz);
if (IS_ERR(val))
return PTR_ERR(val);
if (!sz_max)
sz = sz_min;
else
sz /= sizeof(*out_values);
count = sz;
while (count--)
*out_values++ = *val++;
return sz;
}
EXPORT_SYMBOL_GPL(of_property_read_variable_u8_array);
/**
* of_property_read_variable_u16_array - Find and read an array of u16 from a
* property, with bounds on the minimum and maximum array size.
*
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @out_values: pointer to found values.
* @sz_min: minimum number of array elements to read
* @sz_max: maximum number of array elements to read, if zero there is no
* upper limit on the number of elements in the dts entry but only
* sz_min will be read.
*
* Search for a property in a device node and read 16-bit value(s) from
* it.
*
* dts entry of array should be like:
* ``property = /bits/ 16 <0x5000 0x6000 0x7000>;``
*
* Return: The number of elements read on success, -EINVAL if the property
* does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
* if the property data is smaller than sz_min or longer than sz_max.
*
* The out_values is modified only if a valid u16 value can be decoded.
*/
int of_property_read_variable_u16_array(const struct device_node *np,
const char *propname, u16 *out_values,
size_t sz_min, size_t sz_max)
{
size_t sz, count;
const __be16 *val = of_find_property_value_of_size(np, propname,
(sz_min * sizeof(*out_values)),
(sz_max * sizeof(*out_values)),
&sz);
if (IS_ERR(val))
return PTR_ERR(val);
if (!sz_max)
sz = sz_min;
else
sz /= sizeof(*out_values);
count = sz;
while (count--)
*out_values++ = be16_to_cpup(val++);
return sz;
}
EXPORT_SYMBOL_GPL(of_property_read_variable_u16_array);
/**
* of_property_read_variable_u32_array - Find and read an array of 32 bit
* integers from a property, with bounds on the minimum and maximum array size.
*
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @out_values: pointer to return found values.
* @sz_min: minimum number of array elements to read
* @sz_max: maximum number of array elements to read, if zero there is no
* upper limit on the number of elements in the dts entry but only
* sz_min will be read.
*
* Search for a property in a device node and read 32-bit value(s) from
* it.
*
* Return: The number of elements read on success, -EINVAL if the property
* does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
* if the property data is smaller than sz_min or longer than sz_max.
*
* The out_values is modified only if a valid u32 value can be decoded.
*/
int of_property_read_variable_u32_array(const struct device_node *np,
const char *propname, u32 *out_values,
size_t sz_min, size_t sz_max)
{
size_t sz, count;
const __be32 *val = of_find_property_value_of_size(np, propname,
(sz_min * sizeof(*out_values)),
(sz_max * sizeof(*out_values)),
&sz);
if (IS_ERR(val))
return PTR_ERR(val);
if (!sz_max)
sz = sz_min;
else
sz /= sizeof(*out_values);
count = sz;
while (count--)
*out_values++ = be32_to_cpup(val++);
return sz;
}
EXPORT_SYMBOL_GPL(of_property_read_variable_u32_array);
/**
* of_property_read_u64 - Find and read a 64 bit integer from a property
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @out_value: pointer to return value, modified only if return value is 0.
*
* Search for a property in a device node and read a 64-bit value from
* it.
*
* Return: 0 on success, -EINVAL if the property does not exist,
* -ENODATA if property does not have a value, and -EOVERFLOW if the
* property data isn't large enough.
*
* The out_value is modified only if a valid u64 value can be decoded.
*/
int of_property_read_u64(const struct device_node *np, const char *propname,
u64 *out_value)
{
const __be32 *val = of_find_property_value_of_size(np, propname,
sizeof(*out_value),
0,
NULL);
if (IS_ERR(val))
return PTR_ERR(val);
*out_value = of_read_number(val, 2);
return 0;
}
EXPORT_SYMBOL_GPL(of_property_read_u64);
/**
* of_property_read_variable_u64_array - Find and read an array of 64 bit
* integers from a property, with bounds on the minimum and maximum array size.
*
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @out_values: pointer to found values.
* @sz_min: minimum number of array elements to read
* @sz_max: maximum number of array elements to read, if zero there is no
* upper limit on the number of elements in the dts entry but only
* sz_min will be read.
*
* Search for a property in a device node and read 64-bit value(s) from
* it.
*
* Return: The number of elements read on success, -EINVAL if the property
* does not exist, -ENODATA if property does not have a value, and -EOVERFLOW
* if the property data is smaller than sz_min or longer than sz_max.
*
* The out_values is modified only if a valid u64 value can be decoded.
*/
int of_property_read_variable_u64_array(const struct device_node *np,
const char *propname, u64 *out_values,
size_t sz_min, size_t sz_max)
{
size_t sz, count;
const __be32 *val = of_find_property_value_of_size(np, propname,
(sz_min * sizeof(*out_values)),
(sz_max * sizeof(*out_values)),
&sz);
if (IS_ERR(val))
return PTR_ERR(val);
if (!sz_max)
sz = sz_min;
else
sz /= sizeof(*out_values);
count = sz;
while (count--) {
*out_values++ = of_read_number(val, 2);
val += 2;
}
return sz;
}
EXPORT_SYMBOL_GPL(of_property_read_variable_u64_array);
/**
* of_property_read_string - Find and read a string from a property
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @out_string: pointer to null terminated return string, modified only if
* return value is 0.
*
* Search for a property in a device tree node and retrieve a null
* terminated string value (pointer to data, not a copy).
*
* Return: 0 on success, -EINVAL if the property does not exist, -ENODATA if
* property does not have a value, and -EILSEQ if the string is not
* null-terminated within the length of the property data.
*
* Note that the empty string "" has length of 1, thus -ENODATA cannot
* be interpreted as an empty string.
*
* The out_string pointer is modified only if a valid string can be decoded.
*/
int of_property_read_string(const struct device_node *np, const char *propname,
const char **out_string)
{
const struct property *prop = of_find_property(np, propname, NULL);
if (!prop)
return -EINVAL;
if (!prop->length)
return -ENODATA;
if (strnlen(prop->value, prop->length) >= prop->length)
return -EILSEQ;
*out_string = prop->value;
return 0;
}
EXPORT_SYMBOL_GPL(of_property_read_string);
/**
* of_property_match_string() - Find string in a list and return index
* @np: pointer to node containing string list property
* @propname: string list property name
* @string: pointer to string to search for in string list
*
* This function searches a string list property and returns the index
* of a specific string value.
*/
int of_property_match_string(const struct device_node *np, const char *propname,
const char *string)
{
const struct property *prop = of_find_property(np, propname, NULL);
size_t l;
int i;
const char *p, *end;
if (!prop)
return -EINVAL;
if (!prop->value)
return -ENODATA;
p = prop->value;
end = p + prop->length;
for (i = 0; p < end; i++, p += l) {
l = strnlen(p, end - p) + 1;
if (p + l > end)
return -EILSEQ;
pr_debug("comparing %s with %s\n", string, p);
if (strcmp(string, p) == 0)
return i; /* Found it; return index */
}
return -ENODATA;
}
EXPORT_SYMBOL_GPL(of_property_match_string);
/**
* of_property_read_string_helper() - Utility helper for parsing string properties
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
* @out_strs: output array of string pointers.
* @sz: number of array elements to read.
* @skip: Number of strings to skip over at beginning of list.
*
* Don't call this function directly. It is a utility helper for the
* of_property_read_string*() family of functions.
*/
int of_property_read_string_helper(const struct device_node *np,
const char *propname, const char **out_strs,
size_t sz, int skip)
{
const struct property *prop = of_find_property(np, propname, NULL);
int l = 0, i = 0;
const char *p, *end;
if (!prop)
return -EINVAL;
if (!prop->value)
return -ENODATA;
p = prop->value;
end = p + prop->length;
for (i = 0; p < end && (!out_strs || i < skip + sz); i++, p += l) {
l = strnlen(p, end - p) + 1;
if (p + l > end)
return -EILSEQ;
if (out_strs && i >= skip)
*out_strs++ = p;
}
i -= skip;
return i <= 0 ? -ENODATA : i;
}
EXPORT_SYMBOL_GPL(of_property_read_string_helper);
const __be32 *of_prop_next_u32(struct property *prop, const __be32 *cur,
u32 *pu)
{
const void *curv = cur;
if (!prop)
return NULL;
if (!cur) {
curv = prop->value;
goto out_val;
}
curv += sizeof(*cur);
if (curv >= prop->value + prop->length)
return NULL;
out_val:
*pu = be32_to_cpup(curv);
return curv;
}
EXPORT_SYMBOL_GPL(of_prop_next_u32);
const char *of_prop_next_string(struct property *prop, const char *cur)
{
const void *curv = cur;
if (!prop)
return NULL;
if (!cur)
return prop->value;
curv += strlen(cur) + 1;
if (curv >= prop->value + prop->length)
return NULL;
return curv;
}
EXPORT_SYMBOL_GPL(of_prop_next_string);
/**
* of_graph_parse_endpoint() - parse common endpoint node properties
* @node: pointer to endpoint device_node
* @endpoint: pointer to the OF endpoint data structure
*
* The caller should hold a reference to @node.
*/
int of_graph_parse_endpoint(const struct device_node *node,
struct of_endpoint *endpoint)
{
struct device_node *port_node = of_get_parent(node);
WARN_ONCE(!port_node, "%s(): endpoint %pOF has no parent node\n",
__func__, node);
memset(endpoint, 0, sizeof(*endpoint));
endpoint->local_node = node;
/*
* It doesn't matter whether the two calls below succeed.
* If they don't then the default value 0 is used.
*/
of_property_read_u32(port_node, "reg", &endpoint->port);
of_property_read_u32(node, "reg", &endpoint->id);
of_node_put(port_node);
return 0;
}
EXPORT_SYMBOL(of_graph_parse_endpoint);
/**
* of_graph_get_port_by_id() - get the port matching a given id
* @parent: pointer to the parent device node
* @id: id of the port
*
* Return: A 'port' node pointer with refcount incremented. The caller
* has to use of_node_put() on it when done.
*/
struct device_node *of_graph_get_port_by_id(struct device_node *parent, u32 id)
{
struct device_node *node, *port;
node = of_get_child_by_name(parent, "ports");
if (node)
parent = node;
for_each_child_of_node(parent, port) {
u32 port_id = 0;
if (!of_node_name_eq(port, "port"))
continue;
of_property_read_u32(port, "reg", &port_id);
if (id == port_id)
break;
}
of_node_put(node);
return port;
}
EXPORT_SYMBOL(of_graph_get_port_by_id);
/**
* of_graph_get_next_endpoint() - get next endpoint node
* @parent: pointer to the parent device node
* @prev: previous endpoint node, or NULL to get first
*
* Return: An 'endpoint' node pointer with refcount incremented. Refcount
* of the passed @prev node is decremented.
*/
struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
struct device_node *prev)
{
struct device_node *endpoint;
struct device_node *port;
if (!parent)
return NULL;
/*
* Start by locating the port node. If no previous endpoint is specified
* search for the first port node, otherwise get the previous endpoint
* parent port node.
*/
if (!prev) {
struct device_node *node;
node = of_get_child_by_name(parent, "ports");
if (node)
parent = node;
port = of_get_child_by_name(parent, "port");
of_node_put(node);
if (!port) {
pr_debug("graph: no port node found in %pOF\n", parent);
return NULL;
}
} else {
port = of_get_parent(prev);
if (WARN_ONCE(!port, "%s(): endpoint %pOF has no parent node\n",
__func__, prev))
return NULL;
}
while (1) {
/*
* Now that we have a port node, get the next endpoint by
* getting the next child. If the previous endpoint is NULL this
* will return the first child.
*/
endpoint = of_get_next_child(port, prev);
if (endpoint) {
of_node_put(port);
return endpoint;
}
/* No more endpoints under this port, try the next one. */
prev = NULL;
do {
port = of_get_next_child(parent, port);
if (!port)
return NULL;
} while (!of_node_name_eq(port, "port"));
}
}
EXPORT_SYMBOL(of_graph_get_next_endpoint);
/**
* of_graph_get_endpoint_by_regs() - get endpoint node of specific identifiers
* @parent: pointer to the parent device node
* @port_reg: identifier (value of reg property) of the parent port node
* @reg: identifier (value of reg property) of the endpoint node
*
* Return: An 'endpoint' node pointer which is identified by reg and at the same
* is the child of a port node identified by port_reg. reg and port_reg are
* ignored when they are -1. Use of_node_put() on the pointer when done.
*/
struct device_node *of_graph_get_endpoint_by_regs(
const struct device_node *parent, int port_reg, int reg)
{
struct of_endpoint endpoint;
struct device_node *node = NULL;
for_each_endpoint_of_node(parent, node) {
of_graph_parse_endpoint(node, &endpoint);
if (((port_reg == -1) || (endpoint.port == port_reg)) &&
((reg == -1) || (endpoint.id == reg)))
return node;
}
return NULL;
}
EXPORT_SYMBOL(of_graph_get_endpoint_by_regs);
/**
* of_graph_get_remote_endpoint() - get remote endpoint node
* @node: pointer to a local endpoint device_node
*
* Return: Remote endpoint node associated with remote endpoint node linked
* to @node. Use of_node_put() on it when done.
*/
struct device_node *of_graph_get_remote_endpoint(const struct device_node *node)
{
/* Get remote endpoint node. */
return of_parse_phandle(node, "remote-endpoint", 0);
}
EXPORT_SYMBOL(of_graph_get_remote_endpoint);
/**
* of_graph_get_port_parent() - get port's parent node
* @node: pointer to a local endpoint device_node
*
* Return: device node associated with endpoint node linked
* to @node. Use of_node_put() on it when done.
*/
struct device_node *of_graph_get_port_parent(struct device_node *node)
{
unsigned int depth;
if (!node)
return NULL;
/*
* Preserve usecount for passed in node as of_get_next_parent()
* will do of_node_put() on it.
*/
of_node_get(node);
/* Walk 3 levels up only if there is 'ports' node. */
for (depth = 3; depth && node; depth--) {
node = of_get_next_parent(node);
if (depth == 2 && !of_node_name_eq(node, "ports") &&
!of_node_name_eq(node, "in-ports") &&
!of_node_name_eq(node, "out-ports"))
break;
}
return node;
}
EXPORT_SYMBOL(of_graph_get_port_parent);
/**
* of_graph_get_remote_port_parent() - get remote port's parent node
* @node: pointer to a local endpoint device_node
*
* Return: Remote device node associated with remote endpoint node linked
* to @node. Use of_node_put() on it when done.
*/
struct device_node *of_graph_get_remote_port_parent(
const struct device_node *node)
{
struct device_node *np, *pp;
/* Get remote endpoint node. */
np = of_graph_get_remote_endpoint(node);
pp = of_graph_get_port_parent(np);
of_node_put(np);
return pp;
}
EXPORT_SYMBOL(of_graph_get_remote_port_parent);
/**
* of_graph_get_remote_port() - get remote port node
* @node: pointer to a local endpoint device_node
*
* Return: Remote port node associated with remote endpoint node linked
* to @node. Use of_node_put() on it when done.
*/
struct device_node *of_graph_get_remote_port(const struct device_node *node)
{
struct device_node *np;
/* Get remote endpoint node. */
np = of_graph_get_remote_endpoint(node);
if (!np)
return NULL;
return of_get_next_parent(np);
}
EXPORT_SYMBOL(of_graph_get_remote_port);
/**
* of_graph_get_endpoint_count() - get the number of endpoints in a device node
* @np: parent device node containing ports and endpoints
*
* Return: count of endpoint of this device node
*/
unsigned int of_graph_get_endpoint_count(const struct device_node *np)
{
struct device_node *endpoint;
unsigned int num = 0;
for_each_endpoint_of_node(np, endpoint)
num++;
return num;
}
EXPORT_SYMBOL(of_graph_get_endpoint_count);
/**
* of_graph_get_remote_node() - get remote parent device_node for given port/endpoint
* @node: pointer to parent device_node containing graph port/endpoint
* @port: identifier (value of reg property) of the parent port node
* @endpoint: identifier (value of reg property) of the endpoint node
*
* Return: Remote device node associated with remote endpoint node linked
* to @node. Use of_node_put() on it when done.
*/
struct device_node *of_graph_get_remote_node(const struct device_node *node,
u32 port, u32 endpoint)
{
struct device_node *endpoint_node, *remote;
endpoint_node = of_graph_get_endpoint_by_regs(node, port, endpoint);
if (!endpoint_node) {
pr_debug("no valid endpoint (%d, %d) for node %pOF\n",
port, endpoint, node);
return NULL;
}
remote = of_graph_get_remote_port_parent(endpoint_node);
of_node_put(endpoint_node);
if (!remote) {
pr_debug("no valid remote node\n");
return NULL;
}
if (!of_device_is_available(remote)) {
pr_debug("not available for remote node\n");
of_node_put(remote);
return NULL;
}
return remote;
}
EXPORT_SYMBOL(of_graph_get_remote_node);
static struct fwnode_handle *of_fwnode_get(struct fwnode_handle *fwnode)
{
return of_fwnode_handle(of_node_get(to_of_node(fwnode)));
}
static void of_fwnode_put(struct fwnode_handle *fwnode)
{
of_node_put(to_of_node(fwnode));
}
static bool of_fwnode_device_is_available(const struct fwnode_handle *fwnode)
{
return of_device_is_available(to_of_node(fwnode));
}
static bool of_fwnode_device_dma_supported(const struct fwnode_handle *fwnode)
{
return true;
}
static enum dev_dma_attr
of_fwnode_device_get_dma_attr(const struct fwnode_handle *fwnode)
{
if (of_dma_is_coherent(to_of_node(fwnode)))
return DEV_DMA_COHERENT;
else
return DEV_DMA_NON_COHERENT;
}
static bool of_fwnode_property_present(const struct fwnode_handle *fwnode,
const char *propname)
{
return of_property_read_bool(to_of_node(fwnode), propname);
}
static int of_fwnode_property_read_int_array(const struct fwnode_handle *fwnode,
const char *propname,
unsigned int elem_size, void *val,
size_t nval)
{
const struct device_node *node = to_of_node(fwnode);
if (!val)
return of_property_count_elems_of_size(node, propname,
elem_size);
switch (elem_size) {
case sizeof(u8):
return of_property_read_u8_array(node, propname, val, nval);
case sizeof(u16):
return of_property_read_u16_array(node, propname, val, nval);
case sizeof(u32):
return of_property_read_u32_array(node, propname, val, nval);
case sizeof(u64):
return of_property_read_u64_array(node, propname, val, nval);
}
return -ENXIO;
}
static int
of_fwnode_property_read_string_array(const struct fwnode_handle *fwnode,
const char *propname, const char **val,
size_t nval)
{
const struct device_node *node = to_of_node(fwnode);
return val ?
of_property_read_string_array(node, propname, val, nval) :
of_property_count_strings(node, propname);
}
static const char *of_fwnode_get_name(const struct fwnode_handle *fwnode)
{
return kbasename(to_of_node(fwnode)->full_name);
}
static const char *of_fwnode_get_name_prefix(const struct fwnode_handle *fwnode)
{
/* Root needs no prefix here (its name is "/"). */
if (!to_of_node(fwnode)->parent)
return "";
return "/";
}
static struct fwnode_handle *
of_fwnode_get_parent(const struct fwnode_handle *fwnode)
{
return of_fwnode_handle(of_get_parent(to_of_node(fwnode)));
}
static struct fwnode_handle *
of_fwnode_get_next_child_node(const struct fwnode_handle *fwnode,
struct fwnode_handle *child)
{
return of_fwnode_handle(of_get_next_available_child(to_of_node(fwnode),
to_of_node(child)));
}
static struct fwnode_handle *
of_fwnode_get_named_child_node(const struct fwnode_handle *fwnode,
const char *childname)
{
const struct device_node *node = to_of_node(fwnode);
struct device_node *child;
for_each_available_child_of_node(node, child)
if (of_node_name_eq(child, childname))
return of_fwnode_handle(child);
return NULL;
}
static int
of_fwnode_get_reference_args(const struct fwnode_handle *fwnode,
const char *prop, const char *nargs_prop,
unsigned int nargs, unsigned int index,
struct fwnode_reference_args *args)
{
struct of_phandle_args of_args;
unsigned int i;
int ret;
if (nargs_prop)
ret = of_parse_phandle_with_args(to_of_node(fwnode), prop,
nargs_prop, index, &of_args);
else
ret = of_parse_phandle_with_fixed_args(to_of_node(fwnode), prop,
nargs, index, &of_args);
if (ret < 0)
return ret;
if (!args) {
of_node_put(of_args.np);
return 0;
}
args->nargs = of_args.args_count;
args->fwnode = of_fwnode_handle(of_args.np);
for (i = 0; i < NR_FWNODE_REFERENCE_ARGS; i++)
args->args[i] = i < of_args.args_count ? of_args.args[i] : 0;
return 0;
}
static struct fwnode_handle *
of_fwnode_graph_get_next_endpoint(const struct fwnode_handle *fwnode,
struct fwnode_handle *prev)
{
return of_fwnode_handle(of_graph_get_next_endpoint(to_of_node(fwnode),
to_of_node(prev)));
}
static struct fwnode_handle *
of_fwnode_graph_get_remote_endpoint(const struct fwnode_handle *fwnode)
{
return of_fwnode_handle(
of_graph_get_remote_endpoint(to_of_node(fwnode)));
}
static struct fwnode_handle *
of_fwnode_graph_get_port_parent(struct fwnode_handle *fwnode)
{
struct device_node *np;
/* Get the parent of the port */
np = of_get_parent(to_of_node(fwnode));
if (!np)
return NULL;
/* Is this the "ports" node? If not, it's the port parent. */
if (!of_node_name_eq(np, "ports"))
return of_fwnode_handle(np);
return of_fwnode_handle(of_get_next_parent(np));
}
static int of_fwnode_graph_parse_endpoint(const struct fwnode_handle *fwnode,
struct fwnode_endpoint *endpoint)
{
const struct device_node *node = to_of_node(fwnode);
struct device_node *port_node = of_get_parent(node);
endpoint->local_fwnode = fwnode;
of_property_read_u32(port_node, "reg", &endpoint->port);
of_property_read_u32(node, "reg", &endpoint->id);
of_node_put(port_node);
return 0;
}
static const void *
of_fwnode_device_get_match_data(const struct fwnode_handle *fwnode,
const struct device *dev)
{
return of_device_get_match_data(dev);
}
static void of_link_to_phandle(struct device_node *con_np,
struct device_node *sup_np,
u8 flags)
{
struct device_node *tmp_np = of_node_get(sup_np);
/* Check that sup_np and its ancestors are available. */
while (tmp_np) {
if (of_fwnode_handle(tmp_np)->dev) {
of_node_put(tmp_np);
break;
}
if (!of_device_is_available(tmp_np)) {
of_node_put(tmp_np);
return;
}
tmp_np = of_get_next_parent(tmp_np);
}
fwnode_link_add(of_fwnode_handle(con_np), of_fwnode_handle(sup_np), flags);
}
/**
* parse_prop_cells - Property parsing function for suppliers
*
* @np: Pointer to device tree node containing a list
* @prop_name: Name of property to be parsed. Expected to hold phandle values
* @index: For properties holding a list of phandles, this is the index
* into the list.
* @list_name: Property name that is known to contain list of phandle(s) to
* supplier(s)
* @cells_name: property name that specifies phandles' arguments count
*
* This is a helper function to parse properties that have a known fixed name
* and are a list of phandles and phandle arguments.
*
* Returns:
* - phandle node pointer with refcount incremented. Caller must of_node_put()
* on it when done.
* - NULL if no phandle found at index
*/
static struct device_node *parse_prop_cells(struct device_node *np,
const char *prop_name, int index,
const char *list_name,
const char *cells_name)
{
struct of_phandle_args sup_args;
if (strcmp(prop_name, list_name))
return NULL;
if (__of_parse_phandle_with_args(np, list_name, cells_name, 0, index,
&sup_args))
return NULL;
return sup_args.np;
}
#define DEFINE_SIMPLE_PROP(fname, name, cells) \
static struct device_node *parse_##fname(struct device_node *np, \
const char *prop_name, int index) \
{ \
return parse_prop_cells(np, prop_name, index, name, cells); \
}
static int strcmp_suffix(const char *str, const char *suffix)
{
unsigned int len, suffix_len;
len = strlen(str);
suffix_len = strlen(suffix);
if (len <= suffix_len)
return -1;
return strcmp(str + len - suffix_len, suffix);
}
/**
* parse_suffix_prop_cells - Suffix property parsing function for suppliers
*
* @np: Pointer to device tree node containing a list
* @prop_name: Name of property to be parsed. Expected to hold phandle values
* @index: For properties holding a list of phandles, this is the index
* into the list.
* @suffix: Property suffix that is known to contain list of phandle(s) to
* supplier(s)
* @cells_name: property name that specifies phandles' arguments count
*
* This is a helper function to parse properties that have a known fixed suffix
* and are a list of phandles and phandle arguments.
*
* Returns:
* - phandle node pointer with refcount incremented. Caller must of_node_put()
* on it when done.
* - NULL if no phandle found at index
*/
static struct device_node *parse_suffix_prop_cells(struct device_node *np,
const char *prop_name, int index,
const char *suffix,
const char *cells_name)
{
struct of_phandle_args sup_args;
if (strcmp_suffix(prop_name, suffix))
return NULL;
if (of_parse_phandle_with_args(np, prop_name, cells_name, index,
&sup_args))
return NULL;
return sup_args.np;
}
#define DEFINE_SUFFIX_PROP(fname, suffix, cells) \
static struct device_node *parse_##fname(struct device_node *np, \
const char *prop_name, int index) \
{ \
return parse_suffix_prop_cells(np, prop_name, index, suffix, cells); \
}
/**
* struct supplier_bindings - Property parsing functions for suppliers
*
* @parse_prop: function name
* parse_prop() finds the node corresponding to a supplier phandle
* parse_prop.np: Pointer to device node holding supplier phandle property
* parse_prop.prop_name: Name of property holding a phandle value
* parse_prop.index: For properties holding a list of phandles, this is the
* index into the list
* @get_con_dev: If the consumer node containing the property is never converted
* to a struct device, implement this ops so fw_devlink can use it
* to find the true consumer.
* @optional: Describes whether a supplier is mandatory or not
* @fwlink_flags: Optional fwnode link flags to use when creating a fwnode link
* for this property.
*
* Returns:
* parse_prop() return values are
* - phandle node pointer with refcount incremented. Caller must of_node_put()
* on it when done.
* - NULL if no phandle found at index
*/
struct supplier_bindings {
struct device_node *(*parse_prop)(struct device_node *np,
const char *prop_name, int index);
struct device_node *(*get_con_dev)(struct device_node *np);
bool optional;
u8 fwlink_flags;
};
DEFINE_SIMPLE_PROP(clocks, "clocks", "#clock-cells")
DEFINE_SIMPLE_PROP(interconnects, "interconnects", "#interconnect-cells")
DEFINE_SIMPLE_PROP(iommus, "iommus", "#iommu-cells")
DEFINE_SIMPLE_PROP(mboxes, "mboxes", "#mbox-cells")
DEFINE_SIMPLE_PROP(io_channels, "io-channels", "#io-channel-cells")
DEFINE_SIMPLE_PROP(io_backends, "io-backends", "#io-backend-cells")
DEFINE_SIMPLE_PROP(interrupt_parent, "interrupt-parent", NULL)
DEFINE_SIMPLE_PROP(dmas, "dmas", "#dma-cells")
DEFINE_SIMPLE_PROP(power_domains, "power-domains", "#power-domain-cells")
DEFINE_SIMPLE_PROP(hwlocks, "hwlocks", "#hwlock-cells")
DEFINE_SIMPLE_PROP(extcon, "extcon", NULL)
DEFINE_SIMPLE_PROP(nvmem_cells, "nvmem-cells", "#nvmem-cell-cells")
DEFINE_SIMPLE_PROP(phys, "phys", "#phy-cells")
DEFINE_SIMPLE_PROP(wakeup_parent, "wakeup-parent", NULL)
DEFINE_SIMPLE_PROP(pinctrl0, "pinctrl-0", NULL)
DEFINE_SIMPLE_PROP(pinctrl1, "pinctrl-1", NULL)
DEFINE_SIMPLE_PROP(pinctrl2, "pinctrl-2", NULL)
DEFINE_SIMPLE_PROP(pinctrl3, "pinctrl-3", NULL)
DEFINE_SIMPLE_PROP(pinctrl4, "pinctrl-4", NULL)
DEFINE_SIMPLE_PROP(pinctrl5, "pinctrl-5", NULL)
DEFINE_SIMPLE_PROP(pinctrl6, "pinctrl-6", NULL)
DEFINE_SIMPLE_PROP(pinctrl7, "pinctrl-7", NULL)
DEFINE_SIMPLE_PROP(pinctrl8, "pinctrl-8", NULL)
DEFINE_SIMPLE_PROP(pwms, "pwms", "#pwm-cells")
DEFINE_SIMPLE_PROP(resets, "resets", "#reset-cells")
DEFINE_SIMPLE_PROP(leds, "leds", NULL)
DEFINE_SIMPLE_PROP(backlight, "backlight", NULL)
DEFINE_SIMPLE_PROP(panel, "panel", NULL)
DEFINE_SIMPLE_PROP(msi_parent, "msi-parent", "#msi-cells")
DEFINE_SIMPLE_PROP(post_init_providers, "post-init-providers", NULL)
DEFINE_SIMPLE_PROP(access_controllers, "access-controllers", "#access-controller-cells")
DEFINE_SIMPLE_PROP(pses, "pses", "#pse-cells")
DEFINE_SUFFIX_PROP(regulators, "-supply", NULL)
DEFINE_SUFFIX_PROP(gpio, "-gpio", "#gpio-cells")
static struct device_node *parse_gpios(struct device_node *np,
const char *prop_name, int index)
{
if (!strcmp_suffix(prop_name, ",nr-gpios"))
return NULL;
return parse_suffix_prop_cells(np, prop_name, index, "-gpios",
"#gpio-cells");
}
static struct device_node *parse_iommu_maps(struct device_node *np,
const char *prop_name, int index)
{
if (strcmp(prop_name, "iommu-map"))
return NULL;
return of_parse_phandle(np, prop_name, (index * 4) + 1);
}
static struct device_node *parse_gpio_compat(struct device_node *np,
const char *prop_name, int index)
{
struct of_phandle_args sup_args;
if (strcmp(prop_name, "gpio") && strcmp(prop_name, "gpios"))
return NULL;
/*
* Ignore node with gpio-hog property since its gpios are all provided
* by its parent.
*/
if (of_property_read_bool(np, "gpio-hog"))
return NULL;
if (of_parse_phandle_with_args(np, prop_name, "#gpio-cells", index,
&sup_args))
return NULL;
return sup_args.np;
}
static struct device_node *parse_interrupts(struct device_node *np,
const char *prop_name, int index)
{
struct of_phandle_args sup_args;
if (!IS_ENABLED(CONFIG_OF_IRQ) || IS_ENABLED(CONFIG_PPC))
return NULL;
if (strcmp(prop_name, "interrupts") &&
strcmp(prop_name, "interrupts-extended"))
return NULL;
return of_irq_parse_one(np, index, &sup_args) ? NULL : sup_args.np;
}
static struct device_node *parse_remote_endpoint(struct device_node *np,
const char *prop_name,
int index)
{
/* Return NULL for index > 0 to signify end of remote-endpoints. */
if (index > 0 || strcmp(prop_name, "remote-endpoint"))
return NULL;
return of_graph_get_remote_port_parent(np);
}
static const struct supplier_bindings of_supplier_bindings[] = {
{ .parse_prop = parse_clocks, },
{ .parse_prop = parse_interconnects, },
{ .parse_prop = parse_iommus, .optional = true, },
{ .parse_prop = parse_iommu_maps, .optional = true, },
{ .parse_prop = parse_mboxes, },
{ .parse_prop = parse_io_channels, },
{ .parse_prop = parse_io_backends, },
{ .parse_prop = parse_interrupt_parent, },
{ .parse_prop = parse_dmas, .optional = true, },
{ .parse_prop = parse_power_domains, },
{ .parse_prop = parse_hwlocks, },
{ .parse_prop = parse_extcon, },
{ .parse_prop = parse_nvmem_cells, },
{ .parse_prop = parse_phys, },
{ .parse_prop = parse_wakeup_parent, },
{ .parse_prop = parse_pinctrl0, },
{ .parse_prop = parse_pinctrl1, },
{ .parse_prop = parse_pinctrl2, },
{ .parse_prop = parse_pinctrl3, },
{ .parse_prop = parse_pinctrl4, },
{ .parse_prop = parse_pinctrl5, },
{ .parse_prop = parse_pinctrl6, },
{ .parse_prop = parse_pinctrl7, },
{ .parse_prop = parse_pinctrl8, },
{
.parse_prop = parse_remote_endpoint,
.get_con_dev = of_graph_get_port_parent,
},
{ .parse_prop = parse_pwms, },
{ .parse_prop = parse_resets, },
{ .parse_prop = parse_leds, },
{ .parse_prop = parse_backlight, },
{ .parse_prop = parse_panel, },
{ .parse_prop = parse_msi_parent, },
{ .parse_prop = parse_pses, },
{ .parse_prop = parse_gpio_compat, },
{ .parse_prop = parse_interrupts, },
{ .parse_prop = parse_access_controllers, },
{ .parse_prop = parse_regulators, },
{ .parse_prop = parse_gpio, },
{ .parse_prop = parse_gpios, },
{
.parse_prop = parse_post_init_providers,
.fwlink_flags = FWLINK_FLAG_IGNORE,
},
{}
};
/**
* of_link_property - Create device links to suppliers listed in a property
* @con_np: The consumer device tree node which contains the property
* @prop_name: Name of property to be parsed
*
* This function checks if the property @prop_name that is present in the
* @con_np device tree node is one of the known common device tree bindings
* that list phandles to suppliers. If @prop_name isn't one, this function
* doesn't do anything.
*
* If @prop_name is one, this function attempts to create fwnode links from the
* consumer device tree node @con_np to all the suppliers device tree nodes
* listed in @prop_name.
*
* Any failed attempt to create a fwnode link will NOT result in an immediate
* return. of_link_property() must create links to all the available supplier
* device tree nodes even when attempts to create a link to one or more
* suppliers fail.
*/
static int of_link_property(struct device_node *con_np, const char *prop_name)
{
struct device_node *phandle;
const struct supplier_bindings *s = of_supplier_bindings;
unsigned int i = 0;
bool matched = false;
/* Do not stop at first failed link, link all available suppliers. */
while (!matched && s->parse_prop) {
if (s->optional && !fw_devlink_is_strict()) {
s++;
continue;
}
while ((phandle = s->parse_prop(con_np, prop_name, i))) {
struct device_node *con_dev_np;
con_dev_np = s->get_con_dev
? s->get_con_dev(con_np)
: of_node_get(con_np);
matched = true;
i++;
of_link_to_phandle(con_dev_np, phandle, s->fwlink_flags);
of_node_put(phandle);
of_node_put(con_dev_np);
}
s++;
}
return 0;
}
static void __iomem *of_fwnode_iomap(struct fwnode_handle *fwnode, int index)
{
#ifdef CONFIG_OF_ADDRESS
return of_iomap(to_of_node(fwnode), index);
#else
return NULL;
#endif
}
static int of_fwnode_irq_get(const struct fwnode_handle *fwnode,
unsigned int index)
{
return of_irq_get(to_of_node(fwnode), index);
}
static int of_fwnode_add_links(struct fwnode_handle *fwnode)
{
struct property *p;
struct device_node *con_np = to_of_node(fwnode);
if (IS_ENABLED(CONFIG_X86))
return 0;
if (!con_np)
return -EINVAL;
for_each_property_of_node(con_np, p)
of_link_property(con_np, p->name);
return 0;
}
const struct fwnode_operations of_fwnode_ops = {
.get = of_fwnode_get,
.put = of_fwnode_put,
.device_is_available = of_fwnode_device_is_available,
.device_get_match_data = of_fwnode_device_get_match_data,
.device_dma_supported = of_fwnode_device_dma_supported,
.device_get_dma_attr = of_fwnode_device_get_dma_attr,
.property_present = of_fwnode_property_present,
.property_read_int_array = of_fwnode_property_read_int_array,
.property_read_string_array = of_fwnode_property_read_string_array,
.get_name = of_fwnode_get_name,
.get_name_prefix = of_fwnode_get_name_prefix,
.get_parent = of_fwnode_get_parent,
.get_next_child_node = of_fwnode_get_next_child_node,
.get_named_child_node = of_fwnode_get_named_child_node,
.get_reference_args = of_fwnode_get_reference_args,
.graph_get_next_endpoint = of_fwnode_graph_get_next_endpoint,
.graph_get_remote_endpoint = of_fwnode_graph_get_remote_endpoint,
.graph_get_port_parent = of_fwnode_graph_get_port_parent,
.graph_parse_endpoint = of_fwnode_graph_parse_endpoint,
.iomap = of_fwnode_iomap,
.irq_get = of_fwnode_irq_get,
.add_links = of_fwnode_add_links,
};
EXPORT_SYMBOL_GPL(of_fwnode_ops);