mirror of
https://github.com/torvalds/linux.git
synced 2024-11-23 12:42:02 +00:00
e31cd7824d
Since 39b2bbe3d7
(gpio: add flags argument to gpiod_get*() functions)
which appeared in v3.17-rc1, the gpiod_get* functions take an additional
parameter that allows to specify direction and initial value for output.
Simplify driver accordingly. Furthermore this is one caller less that
stops us making the flags argument to gpiod_get*() mandatory.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
859 lines
21 KiB
C
859 lines
21 KiB
C
/*
|
|
* TI BQ24257 charger driver
|
|
*
|
|
* Copyright (C) 2015 Intel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/types.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/of.h>
|
|
|
|
#define BQ24257_REG_1 0x00
|
|
#define BQ24257_REG_2 0x01
|
|
#define BQ24257_REG_3 0x02
|
|
#define BQ24257_REG_4 0x03
|
|
#define BQ24257_REG_5 0x04
|
|
#define BQ24257_REG_6 0x05
|
|
#define BQ24257_REG_7 0x06
|
|
|
|
#define BQ24257_MANUFACTURER "Texas Instruments"
|
|
#define BQ24257_STAT_IRQ "stat"
|
|
#define BQ24257_PG_GPIO "pg"
|
|
|
|
#define BQ24257_ILIM_SET_DELAY 1000 /* msec */
|
|
|
|
enum bq24257_fields {
|
|
F_WD_FAULT, F_WD_EN, F_STAT, F_FAULT, /* REG 1 */
|
|
F_RESET, F_IILIMIT, F_EN_STAT, F_EN_TERM, F_CE, F_HZ_MODE, /* REG 2 */
|
|
F_VBAT, F_USB_DET, /* REG 3 */
|
|
F_ICHG, F_ITERM, /* REG 4 */
|
|
F_LOOP_STATUS, F_LOW_CHG, F_DPDM_EN, F_CE_STATUS, F_VINDPM, /* REG 5 */
|
|
F_X2_TMR_EN, F_TMR, F_SYSOFF, F_TS_STAT, /* REG 6 */
|
|
F_VOVP, F_CLR_VDP, F_FORCE_BATDET, F_FORCE_PTM, /* REG 7 */
|
|
|
|
F_MAX_FIELDS
|
|
};
|
|
|
|
/* initial field values, converted from uV/uA */
|
|
struct bq24257_init_data {
|
|
u8 ichg; /* charge current */
|
|
u8 vbat; /* regulation voltage */
|
|
u8 iterm; /* termination current */
|
|
};
|
|
|
|
struct bq24257_state {
|
|
u8 status;
|
|
u8 fault;
|
|
bool power_good;
|
|
};
|
|
|
|
struct bq24257_device {
|
|
struct i2c_client *client;
|
|
struct device *dev;
|
|
struct power_supply *charger;
|
|
|
|
struct regmap *rmap;
|
|
struct regmap_field *rmap_fields[F_MAX_FIELDS];
|
|
|
|
struct gpio_desc *pg;
|
|
|
|
struct delayed_work iilimit_setup_work;
|
|
|
|
struct bq24257_init_data init_data;
|
|
struct bq24257_state state;
|
|
|
|
struct mutex lock; /* protect state data */
|
|
};
|
|
|
|
static bool bq24257_is_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case BQ24257_REG_2:
|
|
case BQ24257_REG_4:
|
|
return false;
|
|
|
|
default:
|
|
return true;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config bq24257_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = BQ24257_REG_7,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
|
|
.volatile_reg = bq24257_is_volatile_reg,
|
|
};
|
|
|
|
static const struct reg_field bq24257_reg_fields[] = {
|
|
/* REG 1 */
|
|
[F_WD_FAULT] = REG_FIELD(BQ24257_REG_1, 7, 7),
|
|
[F_WD_EN] = REG_FIELD(BQ24257_REG_1, 6, 6),
|
|
[F_STAT] = REG_FIELD(BQ24257_REG_1, 4, 5),
|
|
[F_FAULT] = REG_FIELD(BQ24257_REG_1, 0, 3),
|
|
/* REG 2 */
|
|
[F_RESET] = REG_FIELD(BQ24257_REG_2, 7, 7),
|
|
[F_IILIMIT] = REG_FIELD(BQ24257_REG_2, 4, 6),
|
|
[F_EN_STAT] = REG_FIELD(BQ24257_REG_2, 3, 3),
|
|
[F_EN_TERM] = REG_FIELD(BQ24257_REG_2, 2, 2),
|
|
[F_CE] = REG_FIELD(BQ24257_REG_2, 1, 1),
|
|
[F_HZ_MODE] = REG_FIELD(BQ24257_REG_2, 0, 0),
|
|
/* REG 3 */
|
|
[F_VBAT] = REG_FIELD(BQ24257_REG_3, 2, 7),
|
|
[F_USB_DET] = REG_FIELD(BQ24257_REG_3, 0, 1),
|
|
/* REG 4 */
|
|
[F_ICHG] = REG_FIELD(BQ24257_REG_4, 3, 7),
|
|
[F_ITERM] = REG_FIELD(BQ24257_REG_4, 0, 2),
|
|
/* REG 5 */
|
|
[F_LOOP_STATUS] = REG_FIELD(BQ24257_REG_5, 6, 7),
|
|
[F_LOW_CHG] = REG_FIELD(BQ24257_REG_5, 5, 5),
|
|
[F_DPDM_EN] = REG_FIELD(BQ24257_REG_5, 4, 4),
|
|
[F_CE_STATUS] = REG_FIELD(BQ24257_REG_5, 3, 3),
|
|
[F_VINDPM] = REG_FIELD(BQ24257_REG_5, 0, 2),
|
|
/* REG 6 */
|
|
[F_X2_TMR_EN] = REG_FIELD(BQ24257_REG_6, 7, 7),
|
|
[F_TMR] = REG_FIELD(BQ24257_REG_6, 5, 6),
|
|
[F_SYSOFF] = REG_FIELD(BQ24257_REG_6, 4, 4),
|
|
[F_TS_STAT] = REG_FIELD(BQ24257_REG_6, 0, 2),
|
|
/* REG 7 */
|
|
[F_VOVP] = REG_FIELD(BQ24257_REG_7, 5, 7),
|
|
[F_CLR_VDP] = REG_FIELD(BQ24257_REG_7, 4, 4),
|
|
[F_FORCE_BATDET] = REG_FIELD(BQ24257_REG_7, 3, 3),
|
|
[F_FORCE_PTM] = REG_FIELD(BQ24257_REG_7, 2, 2)
|
|
};
|
|
|
|
static const u32 bq24257_vbat_map[] = {
|
|
3500000, 3520000, 3540000, 3560000, 3580000, 3600000, 3620000, 3640000,
|
|
3660000, 3680000, 3700000, 3720000, 3740000, 3760000, 3780000, 3800000,
|
|
3820000, 3840000, 3860000, 3880000, 3900000, 3920000, 3940000, 3960000,
|
|
3980000, 4000000, 4020000, 4040000, 4060000, 4080000, 4100000, 4120000,
|
|
4140000, 4160000, 4180000, 4200000, 4220000, 4240000, 4260000, 4280000,
|
|
4300000, 4320000, 4340000, 4360000, 4380000, 4400000, 4420000, 4440000
|
|
};
|
|
|
|
#define BQ24257_VBAT_MAP_SIZE ARRAY_SIZE(bq24257_vbat_map)
|
|
|
|
static const u32 bq24257_ichg_map[] = {
|
|
500000, 550000, 600000, 650000, 700000, 750000, 800000, 850000, 900000,
|
|
950000, 1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000,
|
|
1350000, 1400000, 1450000, 1500000, 1550000, 1600000, 1650000, 1700000,
|
|
1750000, 1800000, 1850000, 1900000, 1950000, 2000000
|
|
};
|
|
|
|
#define BQ24257_ICHG_MAP_SIZE ARRAY_SIZE(bq24257_ichg_map)
|
|
|
|
static const u32 bq24257_iterm_map[] = {
|
|
50000, 75000, 100000, 125000, 150000, 175000, 200000, 225000
|
|
};
|
|
|
|
#define BQ24257_ITERM_MAP_SIZE ARRAY_SIZE(bq24257_iterm_map)
|
|
|
|
static int bq24257_field_read(struct bq24257_device *bq,
|
|
enum bq24257_fields field_id)
|
|
{
|
|
int ret;
|
|
int val;
|
|
|
|
ret = regmap_field_read(bq->rmap_fields[field_id], &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return val;
|
|
}
|
|
|
|
static int bq24257_field_write(struct bq24257_device *bq,
|
|
enum bq24257_fields field_id, u8 val)
|
|
{
|
|
return regmap_field_write(bq->rmap_fields[field_id], val);
|
|
}
|
|
|
|
static u8 bq24257_find_idx(u32 value, const u32 *map, u8 map_size)
|
|
{
|
|
u8 idx;
|
|
|
|
for (idx = 1; idx < map_size; idx++)
|
|
if (value < map[idx])
|
|
break;
|
|
|
|
return idx - 1;
|
|
}
|
|
|
|
enum bq24257_status {
|
|
STATUS_READY,
|
|
STATUS_CHARGE_IN_PROGRESS,
|
|
STATUS_CHARGE_DONE,
|
|
STATUS_FAULT,
|
|
};
|
|
|
|
enum bq24257_fault {
|
|
FAULT_NORMAL,
|
|
FAULT_INPUT_OVP,
|
|
FAULT_INPUT_UVLO,
|
|
FAULT_SLEEP,
|
|
FAULT_BAT_TS,
|
|
FAULT_BAT_OVP,
|
|
FAULT_TS,
|
|
FAULT_TIMER,
|
|
FAULT_NO_BAT,
|
|
FAULT_ISET,
|
|
FAULT_INPUT_LDO_LOW,
|
|
};
|
|
|
|
static int bq24257_power_supply_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
struct bq24257_device *bq = power_supply_get_drvdata(psy);
|
|
struct bq24257_state state;
|
|
|
|
mutex_lock(&bq->lock);
|
|
state = bq->state;
|
|
mutex_unlock(&bq->lock);
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_STATUS:
|
|
if (!state.power_good)
|
|
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
|
|
else if (state.status == STATUS_READY)
|
|
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
|
|
else if (state.status == STATUS_CHARGE_IN_PROGRESS)
|
|
val->intval = POWER_SUPPLY_STATUS_CHARGING;
|
|
else if (state.status == STATUS_CHARGE_DONE)
|
|
val->intval = POWER_SUPPLY_STATUS_FULL;
|
|
else
|
|
val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_MANUFACTURER:
|
|
val->strval = BQ24257_MANUFACTURER;
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
val->intval = state.power_good;
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_HEALTH:
|
|
switch (state.fault) {
|
|
case FAULT_NORMAL:
|
|
val->intval = POWER_SUPPLY_HEALTH_GOOD;
|
|
break;
|
|
|
|
case FAULT_INPUT_OVP:
|
|
case FAULT_BAT_OVP:
|
|
val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
|
|
break;
|
|
|
|
case FAULT_TS:
|
|
case FAULT_BAT_TS:
|
|
val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
|
|
break;
|
|
|
|
case FAULT_TIMER:
|
|
val->intval = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
|
|
break;
|
|
|
|
default:
|
|
val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
|
|
break;
|
|
}
|
|
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
|
|
val->intval = bq24257_ichg_map[bq->init_data.ichg];
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
|
|
val->intval = bq24257_ichg_map[BQ24257_ICHG_MAP_SIZE - 1];
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
|
|
val->intval = bq24257_vbat_map[bq->init_data.vbat];
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
|
|
val->intval = bq24257_vbat_map[BQ24257_VBAT_MAP_SIZE - 1];
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
|
|
val->intval = bq24257_iterm_map[bq->init_data.iterm];
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bq24257_get_chip_state(struct bq24257_device *bq,
|
|
struct bq24257_state *state)
|
|
{
|
|
int ret;
|
|
|
|
ret = bq24257_field_read(bq, F_STAT);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
state->status = ret;
|
|
|
|
ret = bq24257_field_read(bq, F_FAULT);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
state->fault = ret;
|
|
|
|
state->power_good = !gpiod_get_value_cansleep(bq->pg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool bq24257_state_changed(struct bq24257_device *bq,
|
|
struct bq24257_state *new_state)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&bq->lock);
|
|
ret = (bq->state.status != new_state->status ||
|
|
bq->state.fault != new_state->fault ||
|
|
bq->state.power_good != new_state->power_good);
|
|
mutex_unlock(&bq->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
enum bq24257_loop_status {
|
|
LOOP_STATUS_NONE,
|
|
LOOP_STATUS_IN_DPM,
|
|
LOOP_STATUS_IN_CURRENT_LIMIT,
|
|
LOOP_STATUS_THERMAL,
|
|
};
|
|
|
|
enum bq24257_in_ilimit {
|
|
IILIMIT_100,
|
|
IILIMIT_150,
|
|
IILIMIT_500,
|
|
IILIMIT_900,
|
|
IILIMIT_1500,
|
|
IILIMIT_2000,
|
|
IILIMIT_EXT,
|
|
IILIMIT_NONE,
|
|
};
|
|
|
|
enum bq24257_port_type {
|
|
PORT_TYPE_DCP, /* Dedicated Charging Port */
|
|
PORT_TYPE_CDP, /* Charging Downstream Port */
|
|
PORT_TYPE_SDP, /* Standard Downstream Port */
|
|
PORT_TYPE_NON_STANDARD,
|
|
};
|
|
|
|
enum bq24257_safety_timer {
|
|
SAFETY_TIMER_45,
|
|
SAFETY_TIMER_360,
|
|
SAFETY_TIMER_540,
|
|
SAFETY_TIMER_NONE,
|
|
};
|
|
|
|
static int bq24257_iilimit_autoset(struct bq24257_device *bq)
|
|
{
|
|
int loop_status;
|
|
int iilimit;
|
|
int port_type;
|
|
int ret;
|
|
const u8 new_iilimit[] = {
|
|
[PORT_TYPE_DCP] = IILIMIT_2000,
|
|
[PORT_TYPE_CDP] = IILIMIT_2000,
|
|
[PORT_TYPE_SDP] = IILIMIT_500,
|
|
[PORT_TYPE_NON_STANDARD] = IILIMIT_500
|
|
};
|
|
|
|
ret = bq24257_field_read(bq, F_LOOP_STATUS);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
loop_status = ret;
|
|
|
|
ret = bq24257_field_read(bq, F_IILIMIT);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
iilimit = ret;
|
|
|
|
/*
|
|
* All USB ports should be able to handle 500mA. If not, DPM will lower
|
|
* the charging current to accommodate the power source. No need to set
|
|
* a lower IILIMIT value.
|
|
*/
|
|
if (loop_status == LOOP_STATUS_IN_DPM && iilimit == IILIMIT_500)
|
|
return 0;
|
|
|
|
ret = bq24257_field_read(bq, F_USB_DET);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
port_type = ret;
|
|
|
|
ret = bq24257_field_write(bq, F_IILIMIT, new_iilimit[port_type]);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
ret = bq24257_field_write(bq, F_TMR, SAFETY_TIMER_360);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
ret = bq24257_field_write(bq, F_CLR_VDP, 1);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
dev_dbg(bq->dev, "port/loop = %d/%d -> iilimit = %d\n",
|
|
port_type, loop_status, new_iilimit[port_type]);
|
|
|
|
return 0;
|
|
|
|
error:
|
|
dev_err(bq->dev, "%s: Error communicating with the chip.\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
static void bq24257_iilimit_setup_work(struct work_struct *work)
|
|
{
|
|
struct bq24257_device *bq = container_of(work, struct bq24257_device,
|
|
iilimit_setup_work.work);
|
|
|
|
bq24257_iilimit_autoset(bq);
|
|
}
|
|
|
|
static void bq24257_handle_state_change(struct bq24257_device *bq,
|
|
struct bq24257_state *new_state)
|
|
{
|
|
int ret;
|
|
struct bq24257_state old_state;
|
|
bool reset_iilimit = false;
|
|
bool config_iilimit = false;
|
|
|
|
mutex_lock(&bq->lock);
|
|
old_state = bq->state;
|
|
mutex_unlock(&bq->lock);
|
|
|
|
if (!new_state->power_good) { /* power removed */
|
|
cancel_delayed_work_sync(&bq->iilimit_setup_work);
|
|
|
|
/* activate D+/D- port detection algorithm */
|
|
ret = bq24257_field_write(bq, F_DPDM_EN, 1);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
reset_iilimit = true;
|
|
} else if (!old_state.power_good) { /* power inserted */
|
|
config_iilimit = true;
|
|
} else if (new_state->fault == FAULT_NO_BAT) { /* battery removed */
|
|
cancel_delayed_work_sync(&bq->iilimit_setup_work);
|
|
|
|
reset_iilimit = true;
|
|
} else if (old_state.fault == FAULT_NO_BAT) { /* battery connected */
|
|
config_iilimit = true;
|
|
} else if (new_state->fault == FAULT_TIMER) { /* safety timer expired */
|
|
dev_err(bq->dev, "Safety timer expired! Battery dead?\n");
|
|
}
|
|
|
|
if (reset_iilimit) {
|
|
ret = bq24257_field_write(bq, F_IILIMIT, IILIMIT_500);
|
|
if (ret < 0)
|
|
goto error;
|
|
} else if (config_iilimit) {
|
|
schedule_delayed_work(&bq->iilimit_setup_work,
|
|
msecs_to_jiffies(BQ24257_ILIM_SET_DELAY));
|
|
}
|
|
|
|
return;
|
|
|
|
error:
|
|
dev_err(bq->dev, "%s: Error communicating with the chip.\n", __func__);
|
|
}
|
|
|
|
static irqreturn_t bq24257_irq_handler_thread(int irq, void *private)
|
|
{
|
|
int ret;
|
|
struct bq24257_device *bq = private;
|
|
struct bq24257_state state;
|
|
|
|
ret = bq24257_get_chip_state(bq, &state);
|
|
if (ret < 0)
|
|
return IRQ_HANDLED;
|
|
|
|
if (!bq24257_state_changed(bq, &state))
|
|
return IRQ_HANDLED;
|
|
|
|
dev_dbg(bq->dev, "irq(state changed): status/fault/pg = %d/%d/%d\n",
|
|
state.status, state.fault, state.power_good);
|
|
|
|
bq24257_handle_state_change(bq, &state);
|
|
|
|
mutex_lock(&bq->lock);
|
|
bq->state = state;
|
|
mutex_unlock(&bq->lock);
|
|
|
|
power_supply_changed(bq->charger);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int bq24257_hw_init(struct bq24257_device *bq)
|
|
{
|
|
int ret;
|
|
int i;
|
|
struct bq24257_state state;
|
|
|
|
const struct {
|
|
int field;
|
|
u32 value;
|
|
} init_data[] = {
|
|
{F_ICHG, bq->init_data.ichg},
|
|
{F_VBAT, bq->init_data.vbat},
|
|
{F_ITERM, bq->init_data.iterm}
|
|
};
|
|
|
|
/*
|
|
* Disable the watchdog timer to prevent the IC from going back to
|
|
* default settings after 50 seconds of I2C inactivity.
|
|
*/
|
|
ret = bq24257_field_write(bq, F_WD_EN, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* configure the charge currents and voltages */
|
|
for (i = 0; i < ARRAY_SIZE(init_data); i++) {
|
|
ret = bq24257_field_write(bq, init_data[i].field,
|
|
init_data[i].value);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
ret = bq24257_get_chip_state(bq, &state);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
mutex_lock(&bq->lock);
|
|
bq->state = state;
|
|
mutex_unlock(&bq->lock);
|
|
|
|
if (!state.power_good)
|
|
/* activate D+/D- detection algorithm */
|
|
ret = bq24257_field_write(bq, F_DPDM_EN, 1);
|
|
else if (state.fault != FAULT_NO_BAT)
|
|
ret = bq24257_iilimit_autoset(bq);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static enum power_supply_property bq24257_power_supply_props[] = {
|
|
POWER_SUPPLY_PROP_MANUFACTURER,
|
|
POWER_SUPPLY_PROP_STATUS,
|
|
POWER_SUPPLY_PROP_ONLINE,
|
|
POWER_SUPPLY_PROP_HEALTH,
|
|
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
|
|
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
|
|
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
|
|
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
|
|
POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
|
|
};
|
|
|
|
static char *bq24257_charger_supplied_to[] = {
|
|
"main-battery",
|
|
};
|
|
|
|
static const struct power_supply_desc bq24257_power_supply_desc = {
|
|
.name = "bq24257-charger",
|
|
.type = POWER_SUPPLY_TYPE_USB,
|
|
.properties = bq24257_power_supply_props,
|
|
.num_properties = ARRAY_SIZE(bq24257_power_supply_props),
|
|
.get_property = bq24257_power_supply_get_property,
|
|
};
|
|
|
|
static int bq24257_power_supply_init(struct bq24257_device *bq)
|
|
{
|
|
struct power_supply_config psy_cfg = { .drv_data = bq, };
|
|
|
|
psy_cfg.supplied_to = bq24257_charger_supplied_to;
|
|
psy_cfg.num_supplicants = ARRAY_SIZE(bq24257_charger_supplied_to);
|
|
|
|
bq->charger = power_supply_register(bq->dev, &bq24257_power_supply_desc,
|
|
&psy_cfg);
|
|
if (IS_ERR(bq->charger))
|
|
return PTR_ERR(bq->charger);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bq24257_irq_probe(struct bq24257_device *bq)
|
|
{
|
|
struct gpio_desc *stat_irq;
|
|
|
|
stat_irq = devm_gpiod_get_index(bq->dev, BQ24257_STAT_IRQ, 0, GPIOD_IN);
|
|
if (IS_ERR(stat_irq)) {
|
|
dev_err(bq->dev, "could not probe stat_irq pin\n");
|
|
return PTR_ERR(stat_irq);
|
|
}
|
|
|
|
return gpiod_to_irq(stat_irq);
|
|
}
|
|
|
|
static int bq24257_pg_gpio_probe(struct bq24257_device *bq)
|
|
{
|
|
bq->pg = devm_gpiod_get_index(bq->dev, BQ24257_PG_GPIO, 0, GPIOD_IN);
|
|
if (IS_ERR(bq->pg)) {
|
|
dev_err(bq->dev, "could not probe PG pin\n");
|
|
return PTR_ERR(bq->pg);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bq24257_fw_probe(struct bq24257_device *bq)
|
|
{
|
|
int ret;
|
|
u32 property;
|
|
|
|
ret = device_property_read_u32(bq->dev, "ti,charge-current", &property);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
bq->init_data.ichg = bq24257_find_idx(property, bq24257_ichg_map,
|
|
BQ24257_ICHG_MAP_SIZE);
|
|
|
|
ret = device_property_read_u32(bq->dev, "ti,battery-regulation-voltage",
|
|
&property);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
bq->init_data.vbat = bq24257_find_idx(property, bq24257_vbat_map,
|
|
BQ24257_VBAT_MAP_SIZE);
|
|
|
|
ret = device_property_read_u32(bq->dev, "ti,termination-current",
|
|
&property);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
bq->init_data.iterm = bq24257_find_idx(property, bq24257_iterm_map,
|
|
BQ24257_ITERM_MAP_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bq24257_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
|
|
struct device *dev = &client->dev;
|
|
struct bq24257_device *bq;
|
|
int ret;
|
|
int i;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
|
|
dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL);
|
|
if (!bq)
|
|
return -ENOMEM;
|
|
|
|
bq->client = client;
|
|
bq->dev = dev;
|
|
|
|
mutex_init(&bq->lock);
|
|
|
|
bq->rmap = devm_regmap_init_i2c(client, &bq24257_regmap_config);
|
|
if (IS_ERR(bq->rmap)) {
|
|
dev_err(dev, "failed to allocate register map\n");
|
|
return PTR_ERR(bq->rmap);
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(bq24257_reg_fields); i++) {
|
|
const struct reg_field *reg_fields = bq24257_reg_fields;
|
|
|
|
bq->rmap_fields[i] = devm_regmap_field_alloc(dev, bq->rmap,
|
|
reg_fields[i]);
|
|
if (IS_ERR(bq->rmap_fields[i])) {
|
|
dev_err(dev, "cannot allocate regmap field\n");
|
|
return PTR_ERR(bq->rmap_fields[i]);
|
|
}
|
|
}
|
|
|
|
i2c_set_clientdata(client, bq);
|
|
|
|
INIT_DELAYED_WORK(&bq->iilimit_setup_work, bq24257_iilimit_setup_work);
|
|
|
|
if (!dev->platform_data) {
|
|
ret = bq24257_fw_probe(bq);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Cannot read device properties.\n");
|
|
return ret;
|
|
}
|
|
} else {
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* we can only check Power Good status by probing the PG pin */
|
|
ret = bq24257_pg_gpio_probe(bq);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* reset all registers to defaults */
|
|
ret = bq24257_field_write(bq, F_RESET, 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* Put the RESET bit back to 0, in cache. For some reason the HW always
|
|
* returns 1 on this bit, so this is the only way to avoid resetting the
|
|
* chip every time we update another field in this register.
|
|
*/
|
|
ret = bq24257_field_write(bq, F_RESET, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = bq24257_hw_init(bq);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Cannot initialize the chip.\n");
|
|
return ret;
|
|
}
|
|
|
|
if (client->irq <= 0)
|
|
client->irq = bq24257_irq_probe(bq);
|
|
|
|
if (client->irq < 0) {
|
|
dev_err(dev, "no irq resource found\n");
|
|
return client->irq;
|
|
}
|
|
|
|
ret = devm_request_threaded_irq(dev, client->irq, NULL,
|
|
bq24257_irq_handler_thread,
|
|
IRQF_TRIGGER_FALLING |
|
|
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
|
|
BQ24257_STAT_IRQ, bq);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = bq24257_power_supply_init(bq);
|
|
if (ret < 0)
|
|
dev_err(dev, "Failed to register power supply\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bq24257_remove(struct i2c_client *client)
|
|
{
|
|
struct bq24257_device *bq = i2c_get_clientdata(client);
|
|
|
|
cancel_delayed_work_sync(&bq->iilimit_setup_work);
|
|
|
|
power_supply_unregister(bq->charger);
|
|
|
|
bq24257_field_write(bq, F_RESET, 1); /* reset to defaults */
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int bq24257_suspend(struct device *dev)
|
|
{
|
|
struct bq24257_device *bq = dev_get_drvdata(dev);
|
|
int ret = 0;
|
|
|
|
cancel_delayed_work_sync(&bq->iilimit_setup_work);
|
|
|
|
/* reset all registers to default (and activate standalone mode) */
|
|
ret = bq24257_field_write(bq, F_RESET, 1);
|
|
if (ret < 0)
|
|
dev_err(bq->dev, "Cannot reset chip to standalone mode.\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bq24257_resume(struct device *dev)
|
|
{
|
|
int ret;
|
|
struct bq24257_device *bq = dev_get_drvdata(dev);
|
|
|
|
ret = regcache_drop_region(bq->rmap, BQ24257_REG_1, BQ24257_REG_7);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = bq24257_field_write(bq, F_RESET, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = bq24257_hw_init(bq);
|
|
if (ret < 0) {
|
|
dev_err(bq->dev, "Cannot init chip after resume.\n");
|
|
return ret;
|
|
}
|
|
|
|
/* signal userspace, maybe state changed while suspended */
|
|
power_supply_changed(bq->charger);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops bq24257_pm = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(bq24257_suspend, bq24257_resume)
|
|
};
|
|
|
|
static const struct i2c_device_id bq24257_i2c_ids[] = {
|
|
{ "bq24257", 0 },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, bq24257_i2c_ids);
|
|
|
|
static const struct of_device_id bq24257_of_match[] = {
|
|
{ .compatible = "ti,bq24257", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, bq24257_of_match);
|
|
|
|
static const struct acpi_device_id bq24257_acpi_match[] = {
|
|
{"BQ242570", 0},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, bq24257_acpi_match);
|
|
|
|
static struct i2c_driver bq24257_driver = {
|
|
.driver = {
|
|
.name = "bq24257-charger",
|
|
.of_match_table = of_match_ptr(bq24257_of_match),
|
|
.acpi_match_table = ACPI_PTR(bq24257_acpi_match),
|
|
.pm = &bq24257_pm,
|
|
},
|
|
.probe = bq24257_probe,
|
|
.remove = bq24257_remove,
|
|
.id_table = bq24257_i2c_ids,
|
|
};
|
|
module_i2c_driver(bq24257_driver);
|
|
|
|
MODULE_AUTHOR("Laurentiu Palcu <laurentiu.palcu@intel.com>");
|
|
MODULE_DESCRIPTION("bq24257 charger driver");
|
|
MODULE_LICENSE("GPL");
|