Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-01 09:41:44 +00:00
Code Issues Packages Projects Releases Wiki Activity
1a793a1089
linux/drivers/power/ab8500_bmdata.c
Marcus Cooper ea40240178 ab8500_bm: Recharge condition not optimal for battery 
Today the battery recharge is determined with a voltage threshold. This
voltage threshold is only valid when the battery is relaxed. In charging
algorithm the voltage read is the loaded battery voltage and no
compensation is done to get the relaxed voltage. When maintenance
charging is not selected, this makes the recharging condition to almost
immediately activate when there is a discharge present on the battery.

Depending on which vendor the battery comes from this behavior can wear
out the battery much faster than normal.

The fuelgauge driver is responsible to monitor the actual battery
capacity and is able to estimate the remaining capacity. It is better to
use the remaining capacity as a limit to determine when battery should
be recharged.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Reviewed-by: Hakan BERG <hakan.berg@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-15 17:43:46 -08:00

508 lines
12 KiB
C
Raw Blame History

#include <linux/export.h>
#include <linux/power_supply.h>
#include <linux/of.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500/ab8500-bm.h>
/*
* These are the defined batteries that uses a NTC and ID resistor placed
* inside of the battery pack.
* Note that the res_to_temp table must be strictly sorted by falling resistance
* values to work.
*/
static struct abx500_res_to_temp temp_tbl_A_thermistor[] = {
{-5, 53407},
{ 0, 48594},
{ 5, 43804},
{10, 39188},
{15, 34870},
{20, 30933},
{25, 27422},
{30, 24347},
{35, 21694},
{40, 19431},
{45, 17517},
{50, 15908},
{55, 14561},
{60, 13437},
{65, 12500},
};
static struct abx500_res_to_temp temp_tbl_B_thermistor[] = {
{-5, 200000},
{ 0, 159024},
{ 5, 151921},
{10, 144300},
{15, 136424},
{20, 128565},
{25, 120978},
{30, 113875},
{35, 107397},
{40, 101629},
{45, 96592},
{50, 92253},
{55, 88569},
{60, 85461},
{65, 82869},
};
static struct abx500_v_to_cap cap_tbl_A_thermistor[] = {
{4171, 100},
{4114, 95},
{4009, 83},
{3947, 74},
{3907, 67},
{3863, 59},
{3830, 56},
{3813, 53},
{3791, 46},
{3771, 33},
{3754, 25},
{3735, 20},
{3717, 17},
{3681, 13},
{3664, 8},
{3651, 6},
{3635, 5},
{3560, 3},
{3408, 1},
{3247, 0},
};
static struct abx500_v_to_cap cap_tbl_B_thermistor[] = {
{4161, 100},
{4124, 98},
{4044, 90},
{4003, 85},
{3966, 80},
{3933, 75},
{3888, 67},
{3849, 60},
{3813, 55},
{3787, 47},
{3772, 30},
{3751, 25},
{3718, 20},
{3681, 16},
{3660, 14},
{3589, 10},
{3546, 7},
{3495, 4},
{3404, 2},
{3250, 0},
};
static struct abx500_v_to_cap cap_tbl[] = {
{4186, 100},
{4163, 99},
{4114, 95},
{4068, 90},
{3990, 80},
{3926, 70},
{3898, 65},
{3866, 60},
{3833, 55},
{3812, 50},
{3787, 40},
{3768, 30},
{3747, 25},
{3730, 20},
{3705, 15},
{3699, 14},
{3684, 12},
{3672, 9},
{3657, 7},
{3638, 6},
{3556, 4},
{3424, 2},
{3317, 1},
{3094, 0},
};
/*
* Note that the res_to_temp table must be strictly sorted by falling
* resistance values to work.
*/
static struct abx500_res_to_temp temp_tbl[] = {
{-5, 214834},
{ 0, 162943},
{ 5, 124820},
{10, 96520},
{15, 75306},
{20, 59254},
{25, 47000},
{30, 37566},
{35, 30245},
{40, 24520},
{45, 20010},
{50, 16432},
{55, 13576},
{60, 11280},
{65, 9425},
};
/*
* Note that the batres_vs_temp table must be strictly sorted by falling
* temperature values to work.
*/
static struct batres_vs_temp temp_to_batres_tbl_thermistor[] = {
{ 40, 120},
{ 30, 135},
{ 20, 165},
{ 10, 230},
{ 00, 325},
{-10, 445},
{-20, 595},
};
/*
* Note that the batres_vs_temp table must be strictly sorted by falling
* temperature values to work.
*/
static struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[] = {
{ 60, 300},
{ 30, 300},
{ 20, 300},
{ 10, 300},
{ 00, 300},
{-10, 300},
{-20, 300},
};
/* battery resistance table for LI ION 9100 battery */
static struct batres_vs_temp temp_to_batres_tbl_9100[] = {
{ 60, 180},
{ 30, 180},
{ 20, 180},
{ 10, 180},
{ 00, 180},
{-10, 180},
{-20, 180},
};
static struct abx500_battery_type bat_type_thermistor[] = {
[BATTERY_UNKNOWN] = {
/* First element always represent the UNKNOWN battery */
.name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
.resis_high = 0,
.resis_low = 0,
.battery_resistance = 300,
.charge_full_design = 612,
.nominal_voltage = 3700,
.termination_vol = 4050,
.termination_curr = 200,
.recharge_cap = 95,
.normal_cur_lvl = 400,
.normal_vol_lvl = 4100,
.maint_a_cur_lvl = 400,
.maint_a_vol_lvl = 4050,
.maint_a_chg_timer_h = 60,
.maint_b_cur_lvl = 400,
.maint_b_vol_lvl = 4000,
.maint_b_chg_timer_h = 200,
.low_high_cur_lvl = 300,
.low_high_vol_lvl = 4000,
.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
.r_to_t_tbl = temp_tbl,
.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
.v_to_cap_tbl = cap_tbl,
.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
.batres_tbl = temp_to_batres_tbl_thermistor,
},
{
.name = POWER_SUPPLY_TECHNOLOGY_LIPO,
.resis_high = 53407,
.resis_low = 12500,
.battery_resistance = 300,
.charge_full_design = 900,
.nominal_voltage = 3600,
.termination_vol = 4150,
.termination_curr = 80,
.recharge_cap = 95,
.normal_cur_lvl = 700,
.normal_vol_lvl = 4200,
.maint_a_cur_lvl = 600,
.maint_a_vol_lvl = 4150,
.maint_a_chg_timer_h = 60,
.maint_b_cur_lvl = 600,
.maint_b_vol_lvl = 4100,
.maint_b_chg_timer_h = 200,
.low_high_cur_lvl = 300,
.low_high_vol_lvl = 4000,
.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_A_thermistor),
.r_to_t_tbl = temp_tbl_A_thermistor,
.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_A_thermistor),
.v_to_cap_tbl = cap_tbl_A_thermistor,
.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
.batres_tbl = temp_to_batres_tbl_thermistor,
},
{
.name = POWER_SUPPLY_TECHNOLOGY_LIPO,
.resis_high = 200000,
.resis_low = 82869,
.battery_resistance = 300,
.charge_full_design = 900,
.nominal_voltage = 3600,
.termination_vol = 4150,
.termination_curr = 80,
.recharge_cap = 95,
.normal_cur_lvl = 700,
.normal_vol_lvl = 4200,
.maint_a_cur_lvl = 600,
.maint_a_vol_lvl = 4150,
.maint_a_chg_timer_h = 60,
.maint_b_cur_lvl = 600,
.maint_b_vol_lvl = 4100,
.maint_b_chg_timer_h = 200,
.low_high_cur_lvl = 300,
.low_high_vol_lvl = 4000,
.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_B_thermistor),
.r_to_t_tbl = temp_tbl_B_thermistor,
.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_B_thermistor),
.v_to_cap_tbl = cap_tbl_B_thermistor,
.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
.batres_tbl = temp_to_batres_tbl_thermistor,
},
};
static struct abx500_battery_type bat_type_ext_thermistor[] = {
[BATTERY_UNKNOWN] = {
/* First element always represent the UNKNOWN battery */
.name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
.resis_high = 0,
.resis_low = 0,
.battery_resistance = 300,
.charge_full_design = 612,
.nominal_voltage = 3700,
.termination_vol = 4050,
.termination_curr = 200,
.recharge_cap = 95,
.normal_cur_lvl = 400,
.normal_vol_lvl = 4100,
.maint_a_cur_lvl = 400,
.maint_a_vol_lvl = 4050,
.maint_a_chg_timer_h = 60,
.maint_b_cur_lvl = 400,
.maint_b_vol_lvl = 4000,
.maint_b_chg_timer_h = 200,
.low_high_cur_lvl = 300,
.low_high_vol_lvl = 4000,
.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
.r_to_t_tbl = temp_tbl,
.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
.v_to_cap_tbl = cap_tbl,
.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
.batres_tbl = temp_to_batres_tbl_thermistor,
},
/*
* These are the batteries that doesn't have an internal NTC resistor to measure
* its temperature. The temperature in this case is measure with a NTC placed
* near the battery but on the PCB.
*/
{
.name = POWER_SUPPLY_TECHNOLOGY_LIPO,
.resis_high = 76000,
.resis_low = 53000,
.battery_resistance = 300,
.charge_full_design = 900,
.nominal_voltage = 3700,
.termination_vol = 4150,
.termination_curr = 100,
.recharge_cap = 95,
.normal_cur_lvl = 700,
.normal_vol_lvl = 4200,
.maint_a_cur_lvl = 600,
.maint_a_vol_lvl = 4150,
.maint_a_chg_timer_h = 60,
.maint_b_cur_lvl = 600,
.maint_b_vol_lvl = 4100,
.maint_b_chg_timer_h = 200,
.low_high_cur_lvl = 300,
.low_high_vol_lvl = 4000,
.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
.r_to_t_tbl = temp_tbl,
.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
.v_to_cap_tbl = cap_tbl,
.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
.batres_tbl = temp_to_batres_tbl_thermistor,
},
{
.name = POWER_SUPPLY_TECHNOLOGY_LION,
.resis_high = 30000,
.resis_low = 10000,
.battery_resistance = 300,
.charge_full_design = 950,
.nominal_voltage = 3700,
.termination_vol = 4150,
.termination_curr = 100,
.recharge_cap = 95,
.normal_cur_lvl = 700,
.normal_vol_lvl = 4200,
.maint_a_cur_lvl = 600,
.maint_a_vol_lvl = 4150,
.maint_a_chg_timer_h = 60,
.maint_b_cur_lvl = 600,
.maint_b_vol_lvl = 4100,
.maint_b_chg_timer_h = 200,
.low_high_cur_lvl = 300,
.low_high_vol_lvl = 4000,
.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
.r_to_t_tbl = temp_tbl,
.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
.v_to_cap_tbl = cap_tbl,
.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
.batres_tbl = temp_to_batres_tbl_thermistor,
},
{
.name = POWER_SUPPLY_TECHNOLOGY_LION,
.resis_high = 95000,
.resis_low = 76001,
.battery_resistance = 300,
.charge_full_design = 950,
.nominal_voltage = 3700,
.termination_vol = 4150,
.termination_curr = 100,
.recharge_cap = 95,
.normal_cur_lvl = 700,
.normal_vol_lvl = 4200,
.maint_a_cur_lvl = 600,
.maint_a_vol_lvl = 4150,
.maint_a_chg_timer_h = 60,
.maint_b_cur_lvl = 600,
.maint_b_vol_lvl = 4100,
.maint_b_chg_timer_h = 200,
.low_high_cur_lvl = 300,
.low_high_vol_lvl = 4000,
.n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
.r_to_t_tbl = temp_tbl,
.n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
.v_to_cap_tbl = cap_tbl,
.n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
.batres_tbl = temp_to_batres_tbl_thermistor,
},
};
static const struct abx500_bm_capacity_levels cap_levels = {
.critical = 2,
.low = 10,
.normal = 70,
.high = 95,
.full = 100,
};
static const struct abx500_fg_parameters fg = {
.recovery_sleep_timer = 10,
.recovery_total_time = 100,
.init_timer = 1,
.init_discard_time = 5,
.init_total_time = 40,
.high_curr_time = 60,
.accu_charging = 30,
.accu_high_curr = 30,
.high_curr_threshold = 50,
.lowbat_threshold = 3100,
.battok_falling_th_sel0 = 2860,
.battok_raising_th_sel1 = 2860,
.maint_thres = 95,
.user_cap_limit = 15,
};
static const struct abx500_maxim_parameters maxi_params = {
.ena_maxi = true,
.chg_curr = 910,
.wait_cycles = 10,
.charger_curr_step = 100,
};
static const struct abx500_bm_charger_parameters chg = {
.usb_volt_max = 5500,
.usb_curr_max = 1500,
.ac_volt_max = 7500,
.ac_curr_max = 1500,
};
struct abx500_bm_data ab8500_bm_data = {
.temp_under = 3,
.temp_low = 8,
.temp_high = 43,
.temp_over = 48,
.main_safety_tmr_h = 4,
.temp_interval_chg = 20,
.temp_interval_nochg = 120,
.usb_safety_tmr_h = 4,
.bkup_bat_v = BUP_VCH_SEL_2P6V,
.bkup_bat_i = BUP_ICH_SEL_150UA,
.no_maintenance = false,
.capacity_scaling = false,
.adc_therm = ABx500_ADC_THERM_BATCTRL,
.chg_unknown_bat = false,
.enable_overshoot = false,
.fg_res = 100,
.cap_levels = &cap_levels,
.bat_type = bat_type_thermistor,
.n_btypes = 3,
.batt_id = 0,
.interval_charging = 5,
.interval_not_charging = 120,
.temp_hysteresis = 3,
.gnd_lift_resistance = 34,
.maxi = &maxi_params,
.chg_params = &chg,
.fg_params = &fg,
};
int __devinit ab8500_bm_of_probe(struct device *dev,
struct device_node *np,
struct abx500_bm_data *bm)
{
struct batres_vs_temp *tmp_batres_tbl;
struct device_node *battery_node;
const char *btech;
int i;
/* get phandle to 'battery-info' node */
battery_node = of_parse_phandle(np, "battery", 0);
if (!battery_node) {
dev_err(dev, "battery node or reference missing\n");
return -EINVAL;
}
btech = of_get_property(battery_node, "stericsson,battery-type", NULL);
if (!btech) {
dev_warn(dev, "missing property battery-name/type\n");
return -EINVAL;
}
if (strncmp(btech, "LION", 4) == 0) {
bm->no_maintenance = true;
bm->chg_unknown_bat = true;
bm->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600;
bm->bat_type[BATTERY_UNKNOWN].termination_vol = 4150;
bm->bat_type[BATTERY_UNKNOWN].recharge_cap = 95;
bm->bat_type[BATTERY_UNKNOWN].normal_cur_lvl = 520;
bm->bat_type[BATTERY_UNKNOWN].normal_vol_lvl = 4200;
}
if (of_property_read_bool(battery_node, "thermistor-on-batctrl")) {
if (strncmp(btech, "LION", 4) == 0)
tmp_batres_tbl = temp_to_batres_tbl_9100;
else
tmp_batres_tbl = temp_to_batres_tbl_thermistor;
} else {
bm->n_btypes = 4;
bm->bat_type = bat_type_ext_thermistor;
bm->adc_therm = ABx500_ADC_THERM_BATTEMP;
tmp_batres_tbl = temp_to_batres_tbl_ext_thermistor;
}
/* select the battery resolution table */
for (i = 0; i < bm->n_btypes; ++i)
bm->bat_type[i].batres_tbl = tmp_batres_tbl;
of_node_put(battery_node);
return 0;
}
Reference in New Issue View Git Blame Copy Permalink