mirror of
https://github.com/torvalds/linux.git
synced 2024-12-28 05:41:55 +00:00
83f4f3f63b
Exynos platforms have a PCI PHY driver in the PHY framework that can be used by the PCI host bridge drivers to initialize and manage the PHY. Remove the deprecated PHY initialization code in the Exynos PCI host bridge driver by updating the driver to use the PHY framework API; modify the DT binding documentation accordingly. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org>
59 lines
1.7 KiB
Plaintext
59 lines
1.7 KiB
Plaintext
* Samsung Exynos 5440 PCIe interface
|
|
|
|
This PCIe host controller is based on the Synopsys DesignWare PCIe IP
|
|
and thus inherits all the common properties defined in designware-pcie.txt.
|
|
|
|
Required properties:
|
|
- compatible: "samsung,exynos5440-pcie"
|
|
- reg: base addresses and lengths of the PCIe controller,
|
|
- reg-names : First name should be set to "elbi".
|
|
And use the "config" instead of getting the configuration address space
|
|
from "ranges".
|
|
NOTE: When using the "config" property, reg-names must be set.
|
|
- interrupts: A list of interrupt outputs for level interrupt,
|
|
pulse interrupt, special interrupt.
|
|
- phys: From PHY binding. Phandle for the generic PHY.
|
|
Refer to Documentation/devicetree/bindings/phy/samsung-phy.txt
|
|
|
|
For other common properties, refer to
|
|
Documentation/devicetree/bindings/pci/designware-pcie.txt
|
|
|
|
Example:
|
|
|
|
SoC-specific DT Entry (with using PHY framework):
|
|
|
|
pcie_phy0: pcie-phy@270000 {
|
|
...
|
|
reg = <0x270000 0x1000>, <0x271000 0x40>;
|
|
reg-names = "phy", "block";
|
|
...
|
|
};
|
|
|
|
pcie@290000 {
|
|
compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
|
|
reg = <0x290000 0x1000>, <0x40000000 0x1000>;
|
|
reg-names = "elbi", "config";
|
|
clocks = <&clock 28>, <&clock 27>;
|
|
clock-names = "pcie", "pcie_bus";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
phys = <&pcie_phy0>;
|
|
ranges = <0x81000000 0 0 0x60001000 0 0x00010000
|
|
0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
num-lanes = <4>;
|
|
};
|
|
|
|
Board-specific DT Entry:
|
|
|
|
pcie@290000 {
|
|
reset-gpio = <&pin_ctrl 5 0>;
|
|
};
|
|
|
|
pcie@2a0000 {
|
|
reset-gpio = <&pin_ctrl 22 0>;
|
|
};
|