Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-08 05:01:48 +00:00
Code Issues Packages Projects Releases Wiki Activity
18595411a7
linux/arch/arm/mach-exynos/mach-origen.c
Linus Torvalds 4f1cd91497 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media 
Pull second set of media updates from Mauro Carvalho Chehab:
 "Despite its size, most of the stuff here is trivial.  This series
  contains:

   - s5p-mfc: additions at the driver and at the core to support H.264
     hardware codec;
   - Some improvements at s5p and davinci embedded drivers;
   - Some V4L2 compliance fixes applied on a few drivers;
   - Several random trivial patches, including several fixes and a few
     new board support additions;

  Notes:

   1) Some Exynos media patches were dependent on some -arm fixes that
      got merged on changeset 782cd9e.  That's why this pull request is
      based that changeset.

   2) As promised, I reviewed the pending VB2 DMABUF series.

      While setting a test environment, it was noticed that the upstream
      support for Samsung Exynos 4 boards (smdk310 and Origen) are
      broken upstream, likely due to regressions: both defconfigs are
      wrong and regulator settings for both boards are broken.  That,
      allied with some bug at the dummy regulator driver, causes OOPSes
      during boot time.

      Long story short: even fixing the above, the proposed patches
      OOPSed when running the DMABUF test.  Not sure yet if the OOPSes
      are due to some other undetected regressions, or due to some bug
      on the patches.

      Due to the above, DMABUF patches for vb2 got NACKed for 3.7."

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (109 commits)
  [media] m5mols: Add missing #include <linux/sizes.h>
  [media] stk1160: Add support for S-Video input
  Revert "[media] omap3isp: Replace cpu_is_omap3630() with ISP revision check"
  [media]  dvb: LNA implementation changes
  [media] v4l2-ioctl: fix W=1 warnings
  [media] v4l2-ioctl: add blocks check for VIDIOC_SUBDEV_G/S_EDID
  [media] omap3isp: Fix compilation error in ispreg.h
  [media] rc-msi-digivox-ii: Add full scan keycodes
  [media] cx25821: testing the wrong variable
  [media] tda18271-common: hold the I2C adapter during write transfers
  [media] ds3000: add module parameter to force firmware upload
  [media] drivers/media: Remove unnecessary semicolon
  [media] winbond: remove space from driver name
  [media] iguanair: cannot send data from the stack
  [media] omap3isp: Replace cpu_is_omap3630() with ISP revision check
  [media] dvb-usb: print small buffers via %*ph
  [media] uvc: Add return code check at vb2_queue_init()
  [media] em28xx: Replace memcpy with struct assignment
  [media] bt8xx: Add video4linux control V4L2_CID_COLOR_KILLER
  [media] mem2mem_testdev: Use devm_kzalloc() in probe
  ...

Conflicts:
	arch/arm/mach-davinci/include/mach/da8xx.h
2012-10-12 12:39:17 +09:00

825 lines
20 KiB
C
Raw Blame History

/* linux/arch/arm/mach-exynos4/mach-origen.c
*
* Copyright (c) 2011 Insignal Co., Ltd.
* http://www.insignal.co.kr/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/serial_core.h>
#include <linux/leds.h>
#include <linux/gpio.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/input.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/max8997.h>
#include <linux/lcd.h>
#include <linux/rfkill-gpio.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
#include <plat/regs-serial.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/sdhci.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <linux/platform_data/usb-ehci-s5p.h>
#include <plat/clock.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
#include <plat/fb.h>
#include <plat/mfc.h>
#include <plat/hdmi.h>
#include <linux/platform_data/usb-exynos.h>
#include <mach/map.h>
#include <drm/exynos_drm.h>
#include "common.h"
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8
#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = ORIGEN_UCON_DEFAULT,
.ulcon = ORIGEN_ULCON_DEFAULT,
.ufcon = ORIGEN_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = ORIGEN_UCON_DEFAULT,
.ulcon = ORIGEN_ULCON_DEFAULT,
.ufcon = ORIGEN_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = ORIGEN_UCON_DEFAULT,
.ulcon = ORIGEN_ULCON_DEFAULT,
.ufcon = ORIGEN_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = ORIGEN_UCON_DEFAULT,
.ulcon = ORIGEN_ULCON_DEFAULT,
.ufcon = ORIGEN_UFCON_DEFAULT,
},
};
static struct regulator_consumer_supply __initdata ldo3_consumer[] = {
REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */
REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */
REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */
};
static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */
};
static struct regulator_consumer_supply __initdata ldo7_consumer[] = {
REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */
};
static struct regulator_consumer_supply __initdata ldo8_consumer[] = {
REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */
REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */
};
static struct regulator_consumer_supply __initdata ldo9_consumer[] = {
REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
};
static struct regulator_consumer_supply __initdata ldo11_consumer[] = {
REGULATOR_SUPPLY("dvdd", "alc5625"), /* Realtek ALC5625 */
};
static struct regulator_consumer_supply __initdata ldo14_consumer[] = {
REGULATOR_SUPPLY("avdd18", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
};
static struct regulator_consumer_supply __initdata ldo17_consumer[] = {
REGULATOR_SUPPLY("vdd33", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
};
static struct regulator_consumer_supply __initdata buck1_consumer[] = {
REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
};
static struct regulator_consumer_supply __initdata buck2_consumer[] = {
REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
};
static struct regulator_consumer_supply __initdata buck3_consumer[] = {
REGULATOR_SUPPLY("vdd_g3d", "mali_drm"), /* G3D */
};
static struct regulator_consumer_supply __initdata buck7_consumer[] = {
REGULATOR_SUPPLY("vcc", "platform-lcd"), /* LCD */
};
static struct regulator_init_data __initdata max8997_ldo1_data = {
.constraints = {
.name = "VDD_ABB_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_ldo2_data = {
.constraints = {
.name = "VDD_ALIVE_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.enabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_ldo3_data = {
.constraints = {
.name = "VMIPI_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo3_consumer),
.consumer_supplies = ldo3_consumer,
};
static struct regulator_init_data __initdata max8997_ldo4_data = {
.constraints = {
.name = "VDD_RTC_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_ldo6_data = {
.constraints = {
.name = "VMIPI_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo6_consumer),
.consumer_supplies = ldo6_consumer,
};
static struct regulator_init_data __initdata max8997_ldo7_data = {
.constraints = {
.name = "VDD_AUD_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo7_consumer),
.consumer_supplies = ldo7_consumer,
};
static struct regulator_init_data __initdata max8997_ldo8_data = {
.constraints = {
.name = "VADC_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo8_consumer),
.consumer_supplies = ldo8_consumer,
};
static struct regulator_init_data __initdata max8997_ldo9_data = {
.constraints = {
.name = "DVDD_SWB_2.8V",
.min_uV = 2800000,
.max_uV = 2800000,
.apply_uV = 1,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo9_consumer),
.consumer_supplies = ldo9_consumer,
};
static struct regulator_init_data __initdata max8997_ldo10_data = {
.constraints = {
.name = "VDD_PLL_1.1V",
.min_uV = 1100000,
.max_uV = 1100000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_ldo11_data = {
.constraints = {
.name = "VDD_AUD_3V",
.min_uV = 3000000,
.max_uV = 3000000,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo11_consumer),
.consumer_supplies = ldo11_consumer,
};
static struct regulator_init_data __initdata max8997_ldo14_data = {
.constraints = {
.name = "AVDD18_SWB_1.8V",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = 1,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo14_consumer),
.consumer_supplies = ldo14_consumer,
};
static struct regulator_init_data __initdata max8997_ldo17_data = {
.constraints = {
.name = "VDD_SWB_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = 1,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(ldo17_consumer),
.consumer_supplies = ldo17_consumer,
};
static struct regulator_init_data __initdata max8997_ldo21_data = {
.constraints = {
.name = "VDD_MIF_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_buck1_data = {
.constraints = {
.name = "VDD_ARM_1.2V",
.min_uV = 950000,
.max_uV = 1350000,
.always_on = 1,
.boot_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(buck1_consumer),
.consumer_supplies = buck1_consumer,
};
static struct regulator_init_data __initdata max8997_buck2_data = {
.constraints = {
.name = "VDD_INT_1.1V",
.min_uV = 900000,
.max_uV = 1100000,
.always_on = 1,
.boot_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(buck2_consumer),
.consumer_supplies = buck2_consumer,
};
static struct regulator_init_data __initdata max8997_buck3_data = {
.constraints = {
.name = "VDD_G3D_1.1V",
.min_uV = 900000,
.max_uV = 1100000,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1,
},
},
.num_consumer_supplies = ARRAY_SIZE(buck3_consumer),
.consumer_supplies = buck3_consumer,
};
static struct regulator_init_data __initdata max8997_buck5_data = {
.constraints = {
.name = "VDDQ_M1M2_1.2V",
.min_uV = 1200000,
.max_uV = 1200000,
.apply_uV = 1,
.always_on = 1,
.state_mem = {
.disabled = 1,
},
},
};
static struct regulator_init_data __initdata max8997_buck7_data = {
.constraints = {
.name = "VDD_LCD_3.3V",
.min_uV = 3300000,
.max_uV = 3300000,
.boot_on = 1,
.apply_uV = 1,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.disabled = 1
},
},
.num_consumer_supplies = ARRAY_SIZE(buck7_consumer),
.consumer_supplies = buck7_consumer,
};
static struct max8997_regulator_data __initdata origen_max8997_regulators[] = {
{ MAX8997_LDO1, &max8997_ldo1_data },
{ MAX8997_LDO2, &max8997_ldo2_data },
{ MAX8997_LDO3, &max8997_ldo3_data },
{ MAX8997_LDO4, &max8997_ldo4_data },
{ MAX8997_LDO6, &max8997_ldo6_data },
{ MAX8997_LDO7, &max8997_ldo7_data },
{ MAX8997_LDO8, &max8997_ldo8_data },
{ MAX8997_LDO9, &max8997_ldo9_data },
{ MAX8997_LDO10, &max8997_ldo10_data },
{ MAX8997_LDO11, &max8997_ldo11_data },
{ MAX8997_LDO14, &max8997_ldo14_data },
{ MAX8997_LDO17, &max8997_ldo17_data },
{ MAX8997_LDO21, &max8997_ldo21_data },
{ MAX8997_BUCK1, &max8997_buck1_data },
{ MAX8997_BUCK2, &max8997_buck2_data },
{ MAX8997_BUCK3, &max8997_buck3_data },
{ MAX8997_BUCK5, &max8997_buck5_data },
{ MAX8997_BUCK7, &max8997_buck7_data },
};
static struct max8997_platform_data __initdata origen_max8997_pdata = {
.num_regulators = ARRAY_SIZE(origen_max8997_regulators),
.regulators = origen_max8997_regulators,
.wakeup = true,
.buck1_gpiodvs = false,
.buck2_gpiodvs = false,
.buck5_gpiodvs = false,
.ignore_gpiodvs_side_effect = true,
.buck125_default_idx = 0x0,
.buck125_gpios[0] = EXYNOS4_GPX0(0),
.buck125_gpios[1] = EXYNOS4_GPX0(1),
.buck125_gpios[2] = EXYNOS4_GPX0(2),
.buck1_voltage[0] = 1350000,
.buck1_voltage[1] = 1300000,
.buck1_voltage[2] = 1250000,
.buck1_voltage[3] = 1200000,
.buck1_voltage[4] = 1150000,
.buck1_voltage[5] = 1100000,
.buck1_voltage[6] = 1000000,
.buck1_voltage[7] = 950000,
.buck2_voltage[0] = 1100000,
.buck2_voltage[1] = 1100000,
.buck2_voltage[2] = 1100000,
.buck2_voltage[3] = 1100000,
.buck2_voltage[4] = 1000000,
.buck2_voltage[5] = 1000000,
.buck2_voltage[6] = 1000000,
.buck2_voltage[7] = 1000000,
.buck5_voltage[0] = 1200000,
.buck5_voltage[1] = 1200000,
.buck5_voltage[2] = 1200000,
.buck5_voltage[3] = 1200000,
.buck5_voltage[4] = 1200000,
.buck5_voltage[5] = 1200000,
.buck5_voltage[6] = 1200000,
.buck5_voltage[7] = 1200000,
};
/* I2C0 */
static struct i2c_board_info i2c0_devs[] __initdata = {
{
I2C_BOARD_INFO("max8997", (0xCC >> 1)),
.platform_data = &origen_max8997_pdata,
.irq = IRQ_EINT(4),
},
};
static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_INTERNAL,
};
static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_INTERNAL,
};
/* USB EHCI */
static struct s5p_ehci_platdata origen_ehci_pdata;
static void __init origen_ehci_init(void)
{
struct s5p_ehci_platdata *pdata = &origen_ehci_pdata;
s5p_ehci_set_platdata(pdata);
}
/* USB OHCI */
static struct exynos4_ohci_platdata origen_ohci_pdata;
static void __init origen_ohci_init(void)
{
struct exynos4_ohci_platdata *pdata = &origen_ohci_pdata;
exynos4_ohci_set_platdata(pdata);
}
/* USB OTG */
static struct s3c_hsotg_plat origen_hsotg_pdata;
static struct gpio_led origen_gpio_leds[] = {
{
.name = "origen::status1",
.default_trigger = "heartbeat",
.gpio = EXYNOS4_GPX1(3),
.active_low = 1,
},
{
.name = "origen::status2",
.default_trigger = "mmc0",
.gpio = EXYNOS4_GPX1(4),
.active_low = 1,
},
};
static struct gpio_led_platform_data origen_gpio_led_info = {
.leds = origen_gpio_leds,
.num_leds = ARRAY_SIZE(origen_gpio_leds),
};
static struct platform_device origen_leds_gpio = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &origen_gpio_led_info,
},
};
static struct gpio_keys_button origen_gpio_keys_table[] = {
{
.code = KEY_MENU,
.gpio = EXYNOS4_GPX1(5),
.desc = "gpio-keys: KEY_MENU",
.type = EV_KEY,
.active_low = 1,
.wakeup = 1,
.debounce_interval = 1,
}, {
.code = KEY_HOME,
.gpio = EXYNOS4_GPX1(6),
.desc = "gpio-keys: KEY_HOME",
.type = EV_KEY,
.active_low = 1,
.wakeup = 1,
.debounce_interval = 1,
}, {
.code = KEY_BACK,
.gpio = EXYNOS4_GPX1(7),
.desc = "gpio-keys: KEY_BACK",
.type = EV_KEY,
.active_low = 1,
.wakeup = 1,
.debounce_interval = 1,
}, {
.code = KEY_UP,
.gpio = EXYNOS4_GPX2(0),
.desc = "gpio-keys: KEY_UP",
.type = EV_KEY,
.active_low = 1,
.wakeup = 1,
.debounce_interval = 1,
}, {
.code = KEY_DOWN,
.gpio = EXYNOS4_GPX2(1),
.desc = "gpio-keys: KEY_DOWN",
.type = EV_KEY,
.active_low = 1,
.wakeup = 1,
.debounce_interval = 1,
},
};
static struct gpio_keys_platform_data origen_gpio_keys_data = {
.buttons = origen_gpio_keys_table,
.nbuttons = ARRAY_SIZE(origen_gpio_keys_table),
};
static struct platform_device origen_device_gpiokeys = {
.name = "gpio-keys",
.dev = {
.platform_data = &origen_gpio_keys_data,
},
};
static void lcd_hv070wsa_set_power(struct plat_lcd_data *pd, unsigned int power)
{
int ret;
if (power)
ret = gpio_request_one(EXYNOS4_GPE3(4),
GPIOF_OUT_INIT_HIGH, "GPE3_4");
else
ret = gpio_request_one(EXYNOS4_GPE3(4),
GPIOF_OUT_INIT_LOW, "GPE3_4");
gpio_free(EXYNOS4_GPE3(4));
if (ret)
pr_err("failed to request gpio for LCD power: %d\n", ret);
}
static struct plat_lcd_data origen_lcd_hv070wsa_data = {
.set_power = lcd_hv070wsa_set_power,
};
static struct platform_device origen_lcd_hv070wsa = {
.name = "platform-lcd",
.dev.parent = &s5p_device_fimd0.dev,
.dev.platform_data = &origen_lcd_hv070wsa_data,
};
static struct pwm_lookup origen_pwm_lookup[] = {
PWM_LOOKUP("s3c24xx-pwm.0", 0, "pwm-backlight.0", NULL),
};
#ifdef CONFIG_DRM_EXYNOS
static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
.panel = {
.timing = {
.left_margin = 64,
.right_margin = 16,
.upper_margin = 64,
.lower_margin = 16,
.hsync_len = 48,
.vsync_len = 3,
.xres = 1024,
.yres = 600,
},
},
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
VIDCON1_INV_VCLK,
.default_win = 0,
.bpp = 32,
};
#else
static struct s3c_fb_pd_win origen_fb_win0 = {
.xres = 1024,
.yres = 600,
.max_bpp = 32,
.default_bpp = 24,
.virtual_x = 1024,
.virtual_y = 2 * 600,
};
static struct fb_videomode origen_lcd_timing = {
.left_margin = 64,
.right_margin = 16,
.upper_margin = 64,
.lower_margin = 16,
.hsync_len = 48,
.vsync_len = 3,
.xres = 1024,
.yres = 600,
};
static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
.win[0] = &origen_fb_win0,
.vtiming = &origen_lcd_timing,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
VIDCON1_INV_VCLK,
.setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
};
#endif
/* Bluetooth rfkill gpio platform data */
static struct rfkill_gpio_platform_data origen_bt_pdata = {
.reset_gpio = EXYNOS4_GPX2(2),
.shutdown_gpio = -1,
.type = RFKILL_TYPE_BLUETOOTH,
.name = "origen-bt",
};
/* Bluetooth Platform device */
static struct platform_device origen_device_bluetooth = {
.name = "rfkill_gpio",
.id = -1,
.dev = {
.platform_data = &origen_bt_pdata,
},
};
static struct platform_device *origen_devices[] __initdata = {
&s3c_device_hsmmc2,
&s3c_device_hsmmc0,
&s3c_device_i2c0,
&s3c_device_rtc,
&s3c_device_usb_hsotg,
&s3c_device_wdt,
&s5p_device_ehci,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
&s5p_device_fimc3,
&s5p_device_fimc_md,
&s5p_device_fimd0,
&s5p_device_g2d,
&s5p_device_hdmi,
&s5p_device_i2c_hdmiphy,
&s5p_device_jpeg,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
&s5p_device_mixer,
#ifdef CONFIG_DRM_EXYNOS
&exynos_device_drm,
#endif
&exynos4_device_ohci,
&origen_device_gpiokeys,
&origen_lcd_hv070wsa,
&origen_leds_gpio,
&origen_device_bluetooth,
};
/* LCD Backlight data */
static struct samsung_bl_gpio_info origen_bl_gpio_info = {
.no = EXYNOS4_GPD0(0),
.func = S3C_GPIO_SFN(2),
};
static struct platform_pwm_backlight_data origen_bl_data = {
.pwm_id = 0,
.pwm_period_ns = 1000,
};
static void __init origen_bt_setup(void)
{
gpio_request(EXYNOS4_GPA0(0), "GPIO BT_UART");
/* 4 UART Pins configuration */
s3c_gpio_cfgrange_nopull(EXYNOS4_GPA0(0), 4, S3C_GPIO_SFN(2));
/* Setup BT Reset, this gpio will be requesed by rfkill-gpio */
s3c_gpio_cfgpin(EXYNOS4_GPX2(2), S3C_GPIO_OUTPUT);
s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE);
}
/* I2C module and id for HDMIPHY */
static struct i2c_board_info hdmiphy_info = {
I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
};
static void s5p_tv_setup(void)
{
/* Direct HPD to HDMI chip */
gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
}
static void __init origen_map_io(void)
{
exynos_init_io(NULL, 0);
s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
}
static void __init origen_power_init(void)
{
gpio_request(EXYNOS4_GPX0(4), "PMIC_IRQ");
s3c_gpio_cfgpin(EXYNOS4_GPX0(4), S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE);
}
static void __init origen_reserve(void)
{
s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
}
static void __init origen_machine_init(void)
{
origen_power_init();
s3c_i2c0_set_platdata(NULL);
i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
/*
* Since sdhci instance 2 can contain a bootable media,
* sdhci instance 0 is registered after instance 2.
*/
s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
origen_ehci_init();
origen_ohci_init();
s3c_hsotg_set_platdata(&origen_hsotg_pdata);
s5p_tv_setup();
s5p_i2c_hdmiphy_set_platdata(NULL);
s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
#ifdef CONFIG_DRM_EXYNOS
s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
exynos4_fimd0_gpio_setup_24bpp();
#else
s5p_fimd0_set_platdata(&origen_lcd_pdata);
#endif
platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
pwm_add_table(origen_pwm_lookup, ARRAY_SIZE(origen_pwm_lookup));
samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
origen_bt_setup();
}
MACHINE_START(ORIGEN, "ORIGEN")
/* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
.atag_offset = 0x100,
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = origen_map_io,
.handle_irq = gic_handle_irq,
.init_machine = origen_machine_init,
.init_late = exynos_init_late,
.timer = &exynos4_timer,
.reserve = &origen_reserve,
.restart = exynos4_restart,
MACHINE_END
Reference in New Issue View Git Blame Copy Permalink