linux/drivers/acpi/pci_root.c
Linus Torvalds 556f12f602 PCI changes for the v3.9 merge window:
Host bridge hotplug
     - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu)
     - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu)
     - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu)
     - Stop caching _PRT and make independent of bus numbers (Yinghai Lu)
 
   PCI device hotplug
     - Clean up cpqphp dead code (Sasha Levin)
     - Disable ARI unless device and upstream bridge support it (Yijing Wang)
     - Initialize all hot-added devices (not functions 0-7) (Yijing Wang)
 
   Power management
     - Don't touch ASPM if disabled (Joe Lawrence)
     - Fix ASPM link state management (Myron Stowe)
 
   Miscellaneous
     - Fix PCI_EXP_FLAGS accessor (Alex Williamson)
     - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov)
     - Document hotplug resource and MPS parameters (Yijing Wang)
     - Add accessor for PCIe capabilities (Myron Stowe)
     - Drop pciehp suspend/resume messages (Paul Bolle)
     - Make pci_slot built-in only (not a module) (Jiang Liu)
     - Remove unused PCI/ACPI bind ops (Jiang Liu)
     - Removed used pci_root_bus (Bjorn Helgaas)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRKS3hAAoJEFmIoMA60/r8xxoP/j1CS4oCZAnBIVT9fKBkis+/
 CENcfHIUKj6J9iMfJEVvqBELvqaLqtpeNwAGMcGPxV7VuT3K1QumChfaTpRDP0HC
 VDRmrjcmfenEK+YPOG7acsrTyqk2wjpLOyu9MKRxtC5u7tF6376KQpkEFpO4haL4
 eUHTxfE76OkrPBSvx3+PUSf6jqrvrNbjX8K6HdDVVlm3sVAQKmYJU/Wphv2NPOqa
 CAMyCzEGybFjr8hDRwvWgr+06c718GMwQUbnrPdHXAe7lMNMrN/XVBmU9ABN3Aas
 icd3lrDs+yPObgcO/gT8+sAZErCtdJ9zuHGYHdYpRbIQj/5JT4TMk7tw/Bj7vKY9
 Mqmho9GR5YmYTRN9f1r+2n5AQ/KYWXJDrRNOnt5/ys5BOM3vwJ7WJ902zpSwtFQp
 nLX+oD/hLfzpnoIQGDuBAoAXp2Kam3XWRgVvG78buRNrPj+kUzimk14a8qQeY+CB
 El6UKuwi5Uv/qgs1gAqqjmZmsAkon2DnsRZa6Fl8NTkDlis7LY4gp9OU38ySFpB+
 PhCmRyCZmDDqTVtwj6XzR3nPQ5LBSbvsTfgMxYMIUSXHa06tyb2q5p4mEIas0OmU
 RKaP5xQqZuTgD8fbdYrx0xgSrn7JHt/j/X//Qs6unlLCWhlpm3LjJZKxyw2FwBGr
 o4Lci+PiBh3MowCrju9D
 =ER3b
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Host bridge hotplug
    - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu)
    - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu)
    - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu)
    - Stop caching _PRT and make independent of bus numbers (Yinghai Lu)

  PCI device hotplug
    - Clean up cpqphp dead code (Sasha Levin)
    - Disable ARI unless device and upstream bridge support it (Yijing Wang)
    - Initialize all hot-added devices (not functions 0-7) (Yijing Wang)

  Power management
    - Don't touch ASPM if disabled (Joe Lawrence)
    - Fix ASPM link state management (Myron Stowe)

  Miscellaneous
    - Fix PCI_EXP_FLAGS accessor (Alex Williamson)
    - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov)
    - Document hotplug resource and MPS parameters (Yijing Wang)
    - Add accessor for PCIe capabilities (Myron Stowe)
    - Drop pciehp suspend/resume messages (Paul Bolle)
    - Make pci_slot built-in only (not a module) (Jiang Liu)
    - Remove unused PCI/ACPI bind ops (Jiang Liu)
    - Removed used pci_root_bus (Bjorn Helgaas)"

* tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits)
  PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers
  PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS
  ACPI / PCI: Make pci_slot built-in only, not a module
  PCI/PM: Clear state_saved during suspend
  PCI: Use atomic_inc_return() rather than atomic_add_return()
  PCI: Catch attempts to disable already-disabled devices
  PCI: Disable Bus Master unconditionally in pci_device_shutdown()
  PCI: acpiphp: Remove dead code for PCI host bridge hotplug
  PCI: acpiphp: Create companion ACPI devices before creating PCI devices
  PCI: Remove unused "rc" in virtfn_add_bus()
  PCI: pciehp: Drop suspend/resume ENTRY messages
  PCI/ASPM: Don't touch ASPM if forcibly disabled
  PCI/ASPM: Deallocate upstream link state even if device is not PCIe
  PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc
  PCI: Document hpiosize= and hpmemsize= resource reservation parameters
  PCI: Use PCI Express Capability accessor
  PCI: Introduce accessor to retrieve PCIe Capabilities Register
  PCI: Put pci_dev in device tree as early as possible
  PCI: Skip attaching driver in device_add()
  PCI: acpiphp: Keep driver loaded even if no slots found
  ...
2013-02-25 21:18:18 -08:00

762 lines
20 KiB
C

/*
* pci_root.c - ACPI PCI Root Bridge Driver ($Revision: 40 $)
*
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/mutex.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/pci.h>
#include <linux/pci-acpi.h>
#include <linux/pci-aspm.h>
#include <linux/acpi.h>
#include <linux/slab.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#include <acpi/apei.h>
#define PREFIX "ACPI: "
#define _COMPONENT ACPI_PCI_COMPONENT
ACPI_MODULE_NAME("pci_root");
#define ACPI_PCI_ROOT_CLASS "pci_bridge"
#define ACPI_PCI_ROOT_DEVICE_NAME "PCI Root Bridge"
static int acpi_pci_root_add(struct acpi_device *device,
const struct acpi_device_id *not_used);
static void acpi_pci_root_remove(struct acpi_device *device);
#define ACPI_PCIE_REQ_SUPPORT (OSC_EXT_PCI_CONFIG_SUPPORT \
| OSC_ACTIVE_STATE_PWR_SUPPORT \
| OSC_CLOCK_PWR_CAPABILITY_SUPPORT \
| OSC_MSI_SUPPORT)
static const struct acpi_device_id root_device_ids[] = {
{"PNP0A03", 0},
{"", 0},
};
static struct acpi_scan_handler pci_root_handler = {
.ids = root_device_ids,
.attach = acpi_pci_root_add,
.detach = acpi_pci_root_remove,
};
/* Lock to protect both acpi_pci_roots and acpi_pci_drivers lists */
static DEFINE_MUTEX(acpi_pci_root_lock);
static LIST_HEAD(acpi_pci_roots);
static LIST_HEAD(acpi_pci_drivers);
static DEFINE_MUTEX(osc_lock);
int acpi_pci_register_driver(struct acpi_pci_driver *driver)
{
int n = 0;
struct acpi_pci_root *root;
mutex_lock(&acpi_pci_root_lock);
list_add_tail(&driver->node, &acpi_pci_drivers);
if (driver->add)
list_for_each_entry(root, &acpi_pci_roots, node) {
driver->add(root);
n++;
}
mutex_unlock(&acpi_pci_root_lock);
return n;
}
EXPORT_SYMBOL(acpi_pci_register_driver);
void acpi_pci_unregister_driver(struct acpi_pci_driver *driver)
{
struct acpi_pci_root *root;
mutex_lock(&acpi_pci_root_lock);
list_del(&driver->node);
if (driver->remove)
list_for_each_entry(root, &acpi_pci_roots, node)
driver->remove(root);
mutex_unlock(&acpi_pci_root_lock);
}
EXPORT_SYMBOL(acpi_pci_unregister_driver);
/**
* acpi_is_root_bridge - determine whether an ACPI CA node is a PCI root bridge
* @handle - the ACPI CA node in question.
*
* Note: we could make this API take a struct acpi_device * instead, but
* for now, it's more convenient to operate on an acpi_handle.
*/
int acpi_is_root_bridge(acpi_handle handle)
{
int ret;
struct acpi_device *device;
ret = acpi_bus_get_device(handle, &device);
if (ret)
return 0;
ret = acpi_match_device_ids(device, root_device_ids);
if (ret)
return 0;
else
return 1;
}
EXPORT_SYMBOL_GPL(acpi_is_root_bridge);
static acpi_status
get_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
{
struct resource *res = data;
struct acpi_resource_address64 address;
if (resource->type != ACPI_RESOURCE_TYPE_ADDRESS16 &&
resource->type != ACPI_RESOURCE_TYPE_ADDRESS32 &&
resource->type != ACPI_RESOURCE_TYPE_ADDRESS64)
return AE_OK;
acpi_resource_to_address64(resource, &address);
if ((address.address_length > 0) &&
(address.resource_type == ACPI_BUS_NUMBER_RANGE)) {
res->start = address.minimum;
res->end = address.minimum + address.address_length - 1;
}
return AE_OK;
}
static acpi_status try_get_root_bridge_busnr(acpi_handle handle,
struct resource *res)
{
acpi_status status;
res->start = -1;
status =
acpi_walk_resources(handle, METHOD_NAME__CRS,
get_root_bridge_busnr_callback, res);
if (ACPI_FAILURE(status))
return status;
if (res->start == -1)
return AE_ERROR;
return AE_OK;
}
static u8 pci_osc_uuid_str[] = "33DB4D5B-1FF7-401C-9657-7441C03DD766";
static acpi_status acpi_pci_run_osc(acpi_handle handle,
const u32 *capbuf, u32 *retval)
{
struct acpi_osc_context context = {
.uuid_str = pci_osc_uuid_str,
.rev = 1,
.cap.length = 12,
.cap.pointer = (void *)capbuf,
};
acpi_status status;
status = acpi_run_osc(handle, &context);
if (ACPI_SUCCESS(status)) {
*retval = *((u32 *)(context.ret.pointer + 8));
kfree(context.ret.pointer);
}
return status;
}
static acpi_status acpi_pci_query_osc(struct acpi_pci_root *root,
u32 support,
u32 *control)
{
acpi_status status;
u32 result, capbuf[3];
support &= OSC_PCI_SUPPORT_MASKS;
support |= root->osc_support_set;
capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
capbuf[OSC_SUPPORT_TYPE] = support;
if (control) {
*control &= OSC_PCI_CONTROL_MASKS;
capbuf[OSC_CONTROL_TYPE] = *control | root->osc_control_set;
} else {
/* Run _OSC query for all possible controls. */
capbuf[OSC_CONTROL_TYPE] = OSC_PCI_CONTROL_MASKS;
}
status = acpi_pci_run_osc(root->device->handle, capbuf, &result);
if (ACPI_SUCCESS(status)) {
root->osc_support_set = support;
if (control)
*control = result;
}
return status;
}
static acpi_status acpi_pci_osc_support(struct acpi_pci_root *root, u32 flags)
{
acpi_status status;
acpi_handle tmp;
status = acpi_get_handle(root->device->handle, "_OSC", &tmp);
if (ACPI_FAILURE(status))
return status;
mutex_lock(&osc_lock);
status = acpi_pci_query_osc(root, flags, NULL);
mutex_unlock(&osc_lock);
return status;
}
struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle)
{
struct acpi_pci_root *root;
struct acpi_device *device;
if (acpi_bus_get_device(handle, &device) ||
acpi_match_device_ids(device, root_device_ids))
return NULL;
root = acpi_driver_data(device);
return root;
}
EXPORT_SYMBOL_GPL(acpi_pci_find_root);
struct acpi_handle_node {
struct list_head node;
acpi_handle handle;
};
/**
* acpi_get_pci_dev - convert ACPI CA handle to struct pci_dev
* @handle: the handle in question
*
* Given an ACPI CA handle, the desired PCI device is located in the
* list of PCI devices.
*
* If the device is found, its reference count is increased and this
* function returns a pointer to its data structure. The caller must
* decrement the reference count by calling pci_dev_put().
* If no device is found, %NULL is returned.
*/
struct pci_dev *acpi_get_pci_dev(acpi_handle handle)
{
int dev, fn;
unsigned long long adr;
acpi_status status;
acpi_handle phandle;
struct pci_bus *pbus;
struct pci_dev *pdev = NULL;
struct acpi_handle_node *node, *tmp;
struct acpi_pci_root *root;
LIST_HEAD(device_list);
/*
* Walk up the ACPI CA namespace until we reach a PCI root bridge.
*/
phandle = handle;
while (!acpi_is_root_bridge(phandle)) {
node = kzalloc(sizeof(struct acpi_handle_node), GFP_KERNEL);
if (!node)
goto out;
INIT_LIST_HEAD(&node->node);
node->handle = phandle;
list_add(&node->node, &device_list);
status = acpi_get_parent(phandle, &phandle);
if (ACPI_FAILURE(status))
goto out;
}
root = acpi_pci_find_root(phandle);
if (!root)
goto out;
pbus = root->bus;
/*
* Now, walk back down the PCI device tree until we return to our
* original handle. Assumes that everything between the PCI root
* bridge and the device we're looking for must be a P2P bridge.
*/
list_for_each_entry(node, &device_list, node) {
acpi_handle hnd = node->handle;
status = acpi_evaluate_integer(hnd, "_ADR", NULL, &adr);
if (ACPI_FAILURE(status))
goto out;
dev = (adr >> 16) & 0xffff;
fn = adr & 0xffff;
pdev = pci_get_slot(pbus, PCI_DEVFN(dev, fn));
if (!pdev || hnd == handle)
break;
pbus = pdev->subordinate;
pci_dev_put(pdev);
/*
* This function may be called for a non-PCI device that has a
* PCI parent (eg. a disk under a PCI SATA controller). In that
* case pdev->subordinate will be NULL for the parent.
*/
if (!pbus) {
dev_dbg(&pdev->dev, "Not a PCI-to-PCI bridge\n");
pdev = NULL;
break;
}
}
out:
list_for_each_entry_safe(node, tmp, &device_list, node)
kfree(node);
return pdev;
}
EXPORT_SYMBOL_GPL(acpi_get_pci_dev);
/**
* acpi_pci_osc_control_set - Request control of PCI root _OSC features.
* @handle: ACPI handle of a PCI root bridge (or PCIe Root Complex).
* @mask: Mask of _OSC bits to request control of, place to store control mask.
* @req: Mask of _OSC bits the control of is essential to the caller.
*
* Run _OSC query for @mask and if that is successful, compare the returned
* mask of control bits with @req. If all of the @req bits are set in the
* returned mask, run _OSC request for it.
*
* The variable at the @mask address may be modified regardless of whether or
* not the function returns success. On success it will contain the mask of
* _OSC bits the BIOS has granted control of, but its contents are meaningless
* on failure.
**/
acpi_status acpi_pci_osc_control_set(acpi_handle handle, u32 *mask, u32 req)
{
struct acpi_pci_root *root;
acpi_status status;
u32 ctrl, capbuf[3];
acpi_handle tmp;
if (!mask)
return AE_BAD_PARAMETER;
ctrl = *mask & OSC_PCI_CONTROL_MASKS;
if ((ctrl & req) != req)
return AE_TYPE;
root = acpi_pci_find_root(handle);
if (!root)
return AE_NOT_EXIST;
status = acpi_get_handle(handle, "_OSC", &tmp);
if (ACPI_FAILURE(status))
return status;
mutex_lock(&osc_lock);
*mask = ctrl | root->osc_control_set;
/* No need to evaluate _OSC if the control was already granted. */
if ((root->osc_control_set & ctrl) == ctrl)
goto out;
/* Need to check the available controls bits before requesting them. */
while (*mask) {
status = acpi_pci_query_osc(root, root->osc_support_set, mask);
if (ACPI_FAILURE(status))
goto out;
if (ctrl == *mask)
break;
ctrl = *mask;
}
if ((ctrl & req) != req) {
status = AE_SUPPORT;
goto out;
}
capbuf[OSC_QUERY_TYPE] = 0;
capbuf[OSC_SUPPORT_TYPE] = root->osc_support_set;
capbuf[OSC_CONTROL_TYPE] = ctrl;
status = acpi_pci_run_osc(handle, capbuf, mask);
if (ACPI_SUCCESS(status))
root->osc_control_set = *mask;
out:
mutex_unlock(&osc_lock);
return status;
}
EXPORT_SYMBOL(acpi_pci_osc_control_set);
static int acpi_pci_root_add(struct acpi_device *device,
const struct acpi_device_id *not_used)
{
unsigned long long segment, bus;
acpi_status status;
int result;
struct acpi_pci_root *root;
struct acpi_pci_driver *driver;
u32 flags, base_flags;
bool is_osc_granted = false;
root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
if (!root)
return -ENOMEM;
segment = 0;
status = acpi_evaluate_integer(device->handle, METHOD_NAME__SEG, NULL,
&segment);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
printk(KERN_ERR PREFIX "can't evaluate _SEG\n");
result = -ENODEV;
goto end;
}
/* Check _CRS first, then _BBN. If no _BBN, default to zero. */
root->secondary.flags = IORESOURCE_BUS;
status = try_get_root_bridge_busnr(device->handle, &root->secondary);
if (ACPI_FAILURE(status)) {
/*
* We need both the start and end of the downstream bus range
* to interpret _CBA (MMCONFIG base address), so it really is
* supposed to be in _CRS. If we don't find it there, all we
* can do is assume [_BBN-0xFF] or [0-0xFF].
*/
root->secondary.end = 0xFF;
printk(KERN_WARNING FW_BUG PREFIX
"no secondary bus range in _CRS\n");
status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN,
NULL, &bus);
if (ACPI_SUCCESS(status))
root->secondary.start = bus;
else if (status == AE_NOT_FOUND)
root->secondary.start = 0;
else {
printk(KERN_ERR PREFIX "can't evaluate _BBN\n");
result = -ENODEV;
goto end;
}
}
INIT_LIST_HEAD(&root->node);
root->device = device;
root->segment = segment & 0xFFFF;
strcpy(acpi_device_name(device), ACPI_PCI_ROOT_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
device->driver_data = root;
printk(KERN_INFO PREFIX "%s [%s] (domain %04x %pR)\n",
acpi_device_name(device), acpi_device_bid(device),
root->segment, &root->secondary);
root->mcfg_addr = acpi_pci_root_get_mcfg_addr(device->handle);
/*
* All supported architectures that use ACPI have support for
* PCI domains, so we indicate this in _OSC support capabilities.
*/
flags = base_flags = OSC_PCI_SEGMENT_GROUPS_SUPPORT;
acpi_pci_osc_support(root, flags);
/* Indicate support for various _OSC capabilities. */
if (pci_ext_cfg_avail())
flags |= OSC_EXT_PCI_CONFIG_SUPPORT;
if (pcie_aspm_support_enabled()) {
flags |= OSC_ACTIVE_STATE_PWR_SUPPORT |
OSC_CLOCK_PWR_CAPABILITY_SUPPORT;
}
if (pci_msi_enabled())
flags |= OSC_MSI_SUPPORT;
if (flags != base_flags) {
status = acpi_pci_osc_support(root, flags);
if (ACPI_FAILURE(status)) {
dev_info(&device->dev, "ACPI _OSC support "
"notification failed, disabling PCIe ASPM\n");
pcie_no_aspm();
flags = base_flags;
}
}
if (!pcie_ports_disabled
&& (flags & ACPI_PCIE_REQ_SUPPORT) == ACPI_PCIE_REQ_SUPPORT) {
flags = OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL
| OSC_PCI_EXPRESS_NATIVE_HP_CONTROL
| OSC_PCI_EXPRESS_PME_CONTROL;
if (pci_aer_available()) {
if (aer_acpi_firmware_first())
dev_dbg(&device->dev,
"PCIe errors handled by BIOS.\n");
else
flags |= OSC_PCI_EXPRESS_AER_CONTROL;
}
dev_info(&device->dev,
"Requesting ACPI _OSC control (0x%02x)\n", flags);
status = acpi_pci_osc_control_set(device->handle, &flags,
OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
if (ACPI_SUCCESS(status)) {
is_osc_granted = true;
dev_info(&device->dev,
"ACPI _OSC control (0x%02x) granted\n", flags);
} else {
is_osc_granted = false;
dev_info(&device->dev,
"ACPI _OSC request failed (%s), "
"returned control mask: 0x%02x\n",
acpi_format_exception(status), flags);
}
} else {
dev_info(&device->dev,
"Unable to request _OSC control "
"(_OSC support mask: 0x%02x)\n", flags);
}
/*
* TBD: Need PCI interface for enumeration/configuration of roots.
*/
mutex_lock(&acpi_pci_root_lock);
list_add_tail(&root->node, &acpi_pci_roots);
mutex_unlock(&acpi_pci_root_lock);
/*
* Scan the Root Bridge
* --------------------
* Must do this prior to any attempt to bind the root device, as the
* PCI namespace does not get created until this call is made (and
* thus the root bridge's pci_dev does not exist).
*/
root->bus = pci_acpi_scan_root(root);
if (!root->bus) {
printk(KERN_ERR PREFIX
"Bus %04x:%02x not present in PCI namespace\n",
root->segment, (unsigned int)root->secondary.start);
result = -ENODEV;
goto out_del_root;
}
/* ASPM setting */
if (is_osc_granted) {
if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM)
pcie_clear_aspm(root->bus);
} else {
pr_info("ACPI _OSC control for PCIe not granted, "
"disabling ASPM\n");
pcie_no_aspm();
}
pci_acpi_add_bus_pm_notifier(device, root->bus);
if (device->wakeup.flags.run_wake)
device_set_run_wake(root->bus->bridge, true);
if (system_state != SYSTEM_BOOTING) {
pcibios_resource_survey_bus(root->bus);
pci_assign_unassigned_bus_resources(root->bus);
}
mutex_lock(&acpi_pci_root_lock);
list_for_each_entry(driver, &acpi_pci_drivers, node)
if (driver->add)
driver->add(root);
mutex_unlock(&acpi_pci_root_lock);
/* need to after hot-added ioapic is registered */
if (system_state != SYSTEM_BOOTING)
pci_enable_bridges(root->bus);
pci_bus_add_devices(root->bus);
return 1;
out_del_root:
mutex_lock(&acpi_pci_root_lock);
list_del(&root->node);
mutex_unlock(&acpi_pci_root_lock);
end:
kfree(root);
return result;
}
static void acpi_pci_root_remove(struct acpi_device *device)
{
struct acpi_pci_root *root = acpi_driver_data(device);
struct acpi_pci_driver *driver;
pci_stop_root_bus(root->bus);
mutex_lock(&acpi_pci_root_lock);
list_for_each_entry_reverse(driver, &acpi_pci_drivers, node)
if (driver->remove)
driver->remove(root);
mutex_unlock(&acpi_pci_root_lock);
device_set_run_wake(root->bus->bridge, false);
pci_acpi_remove_bus_pm_notifier(device);
pci_remove_root_bus(root->bus);
mutex_lock(&acpi_pci_root_lock);
list_del(&root->node);
mutex_unlock(&acpi_pci_root_lock);
kfree(root);
}
void __init acpi_pci_root_init(void)
{
acpi_hest_init();
if (!acpi_pci_disabled) {
pci_acpi_crs_quirks();
acpi_scan_add_handler(&pci_root_handler);
}
}
/* Support root bridge hotplug */
static void handle_root_bridge_insertion(acpi_handle handle)
{
struct acpi_device *device;
if (!acpi_bus_get_device(handle, &device)) {
printk(KERN_DEBUG "acpi device exists...\n");
return;
}
if (acpi_bus_scan(handle))
printk(KERN_ERR "cannot add bridge to acpi list\n");
}
static void handle_root_bridge_removal(struct acpi_device *device)
{
struct acpi_eject_event *ej_event;
ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL);
if (!ej_event) {
/* Inform firmware the hot-remove operation has error */
(void) acpi_evaluate_hotplug_ost(device->handle,
ACPI_NOTIFY_EJECT_REQUEST,
ACPI_OST_SC_NON_SPECIFIC_FAILURE,
NULL);
return;
}
ej_event->device = device;
ej_event->event = ACPI_NOTIFY_EJECT_REQUEST;
acpi_bus_hot_remove_device(ej_event);
}
static void _handle_hotplug_event_root(struct work_struct *work)
{
struct acpi_pci_root *root;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER };
struct acpi_hp_work *hp_work;
acpi_handle handle;
u32 type;
hp_work = container_of(work, struct acpi_hp_work, work);
handle = hp_work->handle;
type = hp_work->type;
root = acpi_pci_find_root(handle);
acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
switch (type) {
case ACPI_NOTIFY_BUS_CHECK:
/* bus enumerate */
printk(KERN_DEBUG "%s: Bus check notify on %s\n", __func__,
(char *)buffer.pointer);
if (!root)
handle_root_bridge_insertion(handle);
break;
case ACPI_NOTIFY_DEVICE_CHECK:
/* device check */
printk(KERN_DEBUG "%s: Device check notify on %s\n", __func__,
(char *)buffer.pointer);
if (!root)
handle_root_bridge_insertion(handle);
break;
case ACPI_NOTIFY_EJECT_REQUEST:
/* request device eject */
printk(KERN_DEBUG "%s: Device eject notify on %s\n", __func__,
(char *)buffer.pointer);
if (root)
handle_root_bridge_removal(root->device);
break;
default:
printk(KERN_WARNING "notify_handler: unknown event type 0x%x for %s\n",
type, (char *)buffer.pointer);
break;
}
kfree(hp_work); /* allocated in handle_hotplug_event_bridge */
kfree(buffer.pointer);
}
static void handle_hotplug_event_root(acpi_handle handle, u32 type,
void *context)
{
alloc_acpi_hp_work(handle, type, context,
_handle_hotplug_event_root);
}
static acpi_status __init
find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
{
acpi_status status;
char objname[64];
struct acpi_buffer buffer = { .length = sizeof(objname),
.pointer = objname };
int *count = (int *)context;
if (!acpi_is_root_bridge(handle))
return AE_OK;
(*count)++;
acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
handle_hotplug_event_root, NULL);
if (ACPI_FAILURE(status))
printk(KERN_DEBUG "acpi root: %s notify handler is not installed, exit status: %u\n",
objname, (unsigned int)status);
else
printk(KERN_DEBUG "acpi root: %s notify handler is installed\n",
objname);
return AE_OK;
}
void __init acpi_pci_root_hp_init(void)
{
int num = 0;
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX, find_root_bridges, NULL, &num, NULL);
printk(KERN_DEBUG "Found %d acpi root devices\n", num);
}