mirror of
https://github.com/torvalds/linux.git
synced 2024-12-14 23:25:54 +00:00
10e712064b
This patch updates the sunxi-ir driver to set the base clock frequency from devicetree. This is necessary since there are different ir receivers on the market, that operate with different frequencies. So this value could be set if the attached ir receiver needs a different base clock frequency, than the default 8 MHz. Signed-off-by: Philipp Rossak <embed3d@gmail.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
340 lines
9.0 KiB
C
340 lines
9.0 KiB
C
/*
|
|
* Driver for Allwinner sunXi IR controller
|
|
*
|
|
* Copyright (C) 2014 Alexsey Shestacov <wingrime@linux-sunxi.org>
|
|
* Copyright (C) 2014 Alexander Bersenev <bay@hackerdom.ru>
|
|
*
|
|
* Based on sun5i-ir.c:
|
|
* Copyright (C) 2007-2012 Daniel Wang
|
|
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/reset.h>
|
|
#include <media/rc-core.h>
|
|
|
|
#define SUNXI_IR_DEV "sunxi-ir"
|
|
|
|
/* Registers */
|
|
/* IR Control */
|
|
#define SUNXI_IR_CTL_REG 0x00
|
|
/* Global Enable */
|
|
#define REG_CTL_GEN BIT(0)
|
|
/* RX block enable */
|
|
#define REG_CTL_RXEN BIT(1)
|
|
/* CIR mode */
|
|
#define REG_CTL_MD (BIT(4) | BIT(5))
|
|
|
|
/* Rx Config */
|
|
#define SUNXI_IR_RXCTL_REG 0x10
|
|
/* Pulse Polarity Invert flag */
|
|
#define REG_RXCTL_RPPI BIT(2)
|
|
|
|
/* Rx Data */
|
|
#define SUNXI_IR_RXFIFO_REG 0x20
|
|
|
|
/* Rx Interrupt Enable */
|
|
#define SUNXI_IR_RXINT_REG 0x2C
|
|
/* Rx FIFO Overflow */
|
|
#define REG_RXINT_ROI_EN BIT(0)
|
|
/* Rx Packet End */
|
|
#define REG_RXINT_RPEI_EN BIT(1)
|
|
/* Rx FIFO Data Available */
|
|
#define REG_RXINT_RAI_EN BIT(4)
|
|
|
|
/* Rx FIFO available byte level */
|
|
#define REG_RXINT_RAL(val) ((val) << 8)
|
|
|
|
/* Rx Interrupt Status */
|
|
#define SUNXI_IR_RXSTA_REG 0x30
|
|
/* RX FIFO Get Available Counter */
|
|
#define REG_RXSTA_GET_AC(val) (((val) >> 8) & (ir->fifo_size * 2 - 1))
|
|
/* Clear all interrupt status value */
|
|
#define REG_RXSTA_CLEARALL 0xff
|
|
|
|
/* IR Sample Config */
|
|
#define SUNXI_IR_CIR_REG 0x34
|
|
/* CIR_REG register noise threshold */
|
|
#define REG_CIR_NTHR(val) (((val) << 2) & (GENMASK(7, 2)))
|
|
/* CIR_REG register idle threshold */
|
|
#define REG_CIR_ITHR(val) (((val) << 8) & (GENMASK(15, 8)))
|
|
|
|
/* Required frequency for IR0 or IR1 clock in CIR mode (default) */
|
|
#define SUNXI_IR_BASE_CLK 8000000
|
|
/* Noise threshold in samples */
|
|
#define SUNXI_IR_RXNOISE 1
|
|
/* Idle Threshold in samples */
|
|
#define SUNXI_IR_RXIDLE 20
|
|
/* Time after which device stops sending data in ms */
|
|
#define SUNXI_IR_TIMEOUT 120
|
|
|
|
struct sunxi_ir {
|
|
spinlock_t ir_lock;
|
|
struct rc_dev *rc;
|
|
void __iomem *base;
|
|
int irq;
|
|
int fifo_size;
|
|
struct clk *clk;
|
|
struct clk *apb_clk;
|
|
struct reset_control *rst;
|
|
const char *map_name;
|
|
};
|
|
|
|
static irqreturn_t sunxi_ir_irq(int irqno, void *dev_id)
|
|
{
|
|
unsigned long status;
|
|
unsigned char dt;
|
|
unsigned int cnt, rc;
|
|
struct sunxi_ir *ir = dev_id;
|
|
DEFINE_IR_RAW_EVENT(rawir);
|
|
|
|
spin_lock(&ir->ir_lock);
|
|
|
|
status = readl(ir->base + SUNXI_IR_RXSTA_REG);
|
|
|
|
/* clean all pending statuses */
|
|
writel(status | REG_RXSTA_CLEARALL, ir->base + SUNXI_IR_RXSTA_REG);
|
|
|
|
if (status & (REG_RXINT_RAI_EN | REG_RXINT_RPEI_EN)) {
|
|
/* How many messages in fifo */
|
|
rc = REG_RXSTA_GET_AC(status);
|
|
/* Sanity check */
|
|
rc = rc > ir->fifo_size ? ir->fifo_size : rc;
|
|
/* If we have data */
|
|
for (cnt = 0; cnt < rc; cnt++) {
|
|
/* for each bit in fifo */
|
|
dt = readb(ir->base + SUNXI_IR_RXFIFO_REG);
|
|
rawir.pulse = (dt & 0x80) != 0;
|
|
rawir.duration = ((dt & 0x7f) + 1) *
|
|
ir->rc->rx_resolution;
|
|
ir_raw_event_store_with_filter(ir->rc, &rawir);
|
|
}
|
|
}
|
|
|
|
if (status & REG_RXINT_ROI_EN) {
|
|
ir_raw_event_reset(ir->rc);
|
|
} else if (status & REG_RXINT_RPEI_EN) {
|
|
ir_raw_event_set_idle(ir->rc, true);
|
|
ir_raw_event_handle(ir->rc);
|
|
}
|
|
|
|
spin_unlock(&ir->ir_lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int sunxi_ir_probe(struct platform_device *pdev)
|
|
{
|
|
int ret = 0;
|
|
unsigned long tmp = 0;
|
|
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *dn = dev->of_node;
|
|
struct resource *res;
|
|
struct sunxi_ir *ir;
|
|
u32 b_clk_freq = SUNXI_IR_BASE_CLK;
|
|
|
|
ir = devm_kzalloc(dev, sizeof(struct sunxi_ir), GFP_KERNEL);
|
|
if (!ir)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_init(&ir->ir_lock);
|
|
|
|
if (of_device_is_compatible(dn, "allwinner,sun5i-a13-ir"))
|
|
ir->fifo_size = 64;
|
|
else
|
|
ir->fifo_size = 16;
|
|
|
|
/* Clock */
|
|
ir->apb_clk = devm_clk_get(dev, "apb");
|
|
if (IS_ERR(ir->apb_clk)) {
|
|
dev_err(dev, "failed to get a apb clock.\n");
|
|
return PTR_ERR(ir->apb_clk);
|
|
}
|
|
ir->clk = devm_clk_get(dev, "ir");
|
|
if (IS_ERR(ir->clk)) {
|
|
dev_err(dev, "failed to get a ir clock.\n");
|
|
return PTR_ERR(ir->clk);
|
|
}
|
|
|
|
/* Base clock frequency (optional) */
|
|
of_property_read_u32(dn, "clock-frequency", &b_clk_freq);
|
|
|
|
/* Reset (optional) */
|
|
ir->rst = devm_reset_control_get_optional_exclusive(dev, NULL);
|
|
if (IS_ERR(ir->rst))
|
|
return PTR_ERR(ir->rst);
|
|
ret = reset_control_deassert(ir->rst);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_set_rate(ir->clk, b_clk_freq);
|
|
if (ret) {
|
|
dev_err(dev, "set ir base clock failed!\n");
|
|
goto exit_reset_assert;
|
|
}
|
|
dev_dbg(dev, "set base clock frequency to %d Hz.\n", b_clk_freq);
|
|
|
|
if (clk_prepare_enable(ir->apb_clk)) {
|
|
dev_err(dev, "try to enable apb_ir_clk failed\n");
|
|
ret = -EINVAL;
|
|
goto exit_reset_assert;
|
|
}
|
|
|
|
if (clk_prepare_enable(ir->clk)) {
|
|
dev_err(dev, "try to enable ir_clk failed\n");
|
|
ret = -EINVAL;
|
|
goto exit_clkdisable_apb_clk;
|
|
}
|
|
|
|
/* IO */
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
ir->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(ir->base)) {
|
|
dev_err(dev, "failed to map registers\n");
|
|
ret = PTR_ERR(ir->base);
|
|
goto exit_clkdisable_clk;
|
|
}
|
|
|
|
ir->rc = rc_allocate_device(RC_DRIVER_IR_RAW);
|
|
if (!ir->rc) {
|
|
dev_err(dev, "failed to allocate device\n");
|
|
ret = -ENOMEM;
|
|
goto exit_clkdisable_clk;
|
|
}
|
|
|
|
ir->rc->priv = ir;
|
|
ir->rc->device_name = SUNXI_IR_DEV;
|
|
ir->rc->input_phys = "sunxi-ir/input0";
|
|
ir->rc->input_id.bustype = BUS_HOST;
|
|
ir->rc->input_id.vendor = 0x0001;
|
|
ir->rc->input_id.product = 0x0001;
|
|
ir->rc->input_id.version = 0x0100;
|
|
ir->map_name = of_get_property(dn, "linux,rc-map-name", NULL);
|
|
ir->rc->map_name = ir->map_name ?: RC_MAP_EMPTY;
|
|
ir->rc->dev.parent = dev;
|
|
ir->rc->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER;
|
|
/* Frequency after IR internal divider with sample period in ns */
|
|
ir->rc->rx_resolution = (1000000000ul / (b_clk_freq / 64));
|
|
ir->rc->timeout = MS_TO_NS(SUNXI_IR_TIMEOUT);
|
|
ir->rc->driver_name = SUNXI_IR_DEV;
|
|
|
|
ret = rc_register_device(ir->rc);
|
|
if (ret) {
|
|
dev_err(dev, "failed to register rc device\n");
|
|
goto exit_free_dev;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, ir);
|
|
|
|
/* IRQ */
|
|
ir->irq = platform_get_irq(pdev, 0);
|
|
if (ir->irq < 0) {
|
|
dev_err(dev, "no irq resource\n");
|
|
ret = ir->irq;
|
|
goto exit_free_dev;
|
|
}
|
|
|
|
ret = devm_request_irq(dev, ir->irq, sunxi_ir_irq, 0, SUNXI_IR_DEV, ir);
|
|
if (ret) {
|
|
dev_err(dev, "failed request irq\n");
|
|
goto exit_free_dev;
|
|
}
|
|
|
|
/* Enable CIR Mode */
|
|
writel(REG_CTL_MD, ir->base+SUNXI_IR_CTL_REG);
|
|
|
|
/* Set noise threshold and idle threshold */
|
|
writel(REG_CIR_NTHR(SUNXI_IR_RXNOISE)|REG_CIR_ITHR(SUNXI_IR_RXIDLE),
|
|
ir->base + SUNXI_IR_CIR_REG);
|
|
|
|
/* Invert Input Signal */
|
|
writel(REG_RXCTL_RPPI, ir->base + SUNXI_IR_RXCTL_REG);
|
|
|
|
/* Clear All Rx Interrupt Status */
|
|
writel(REG_RXSTA_CLEARALL, ir->base + SUNXI_IR_RXSTA_REG);
|
|
|
|
/*
|
|
* Enable IRQ on overflow, packet end, FIFO available with trigger
|
|
* level
|
|
*/
|
|
writel(REG_RXINT_ROI_EN | REG_RXINT_RPEI_EN |
|
|
REG_RXINT_RAI_EN | REG_RXINT_RAL(ir->fifo_size / 2 - 1),
|
|
ir->base + SUNXI_IR_RXINT_REG);
|
|
|
|
/* Enable IR Module */
|
|
tmp = readl(ir->base + SUNXI_IR_CTL_REG);
|
|
writel(tmp | REG_CTL_GEN | REG_CTL_RXEN, ir->base + SUNXI_IR_CTL_REG);
|
|
|
|
dev_info(dev, "initialized sunXi IR driver\n");
|
|
return 0;
|
|
|
|
exit_free_dev:
|
|
rc_free_device(ir->rc);
|
|
exit_clkdisable_clk:
|
|
clk_disable_unprepare(ir->clk);
|
|
exit_clkdisable_apb_clk:
|
|
clk_disable_unprepare(ir->apb_clk);
|
|
exit_reset_assert:
|
|
reset_control_assert(ir->rst);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sunxi_ir_remove(struct platform_device *pdev)
|
|
{
|
|
unsigned long flags;
|
|
struct sunxi_ir *ir = platform_get_drvdata(pdev);
|
|
|
|
clk_disable_unprepare(ir->clk);
|
|
clk_disable_unprepare(ir->apb_clk);
|
|
reset_control_assert(ir->rst);
|
|
|
|
spin_lock_irqsave(&ir->ir_lock, flags);
|
|
/* disable IR IRQ */
|
|
writel(0, ir->base + SUNXI_IR_RXINT_REG);
|
|
/* clear All Rx Interrupt Status */
|
|
writel(REG_RXSTA_CLEARALL, ir->base + SUNXI_IR_RXSTA_REG);
|
|
/* disable IR */
|
|
writel(0, ir->base + SUNXI_IR_CTL_REG);
|
|
spin_unlock_irqrestore(&ir->ir_lock, flags);
|
|
|
|
rc_unregister_device(ir->rc);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id sunxi_ir_match[] = {
|
|
{ .compatible = "allwinner,sun4i-a10-ir", },
|
|
{ .compatible = "allwinner,sun5i-a13-ir", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sunxi_ir_match);
|
|
|
|
static struct platform_driver sunxi_ir_driver = {
|
|
.probe = sunxi_ir_probe,
|
|
.remove = sunxi_ir_remove,
|
|
.driver = {
|
|
.name = SUNXI_IR_DEV,
|
|
.of_match_table = sunxi_ir_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(sunxi_ir_driver);
|
|
|
|
MODULE_DESCRIPTION("Allwinner sunXi IR controller driver");
|
|
MODULE_AUTHOR("Alexsey Shestacov <wingrime@linux-sunxi.org>");
|
|
MODULE_LICENSE("GPL");
|