mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 05:02:12 +00:00
ed5c2f5fd1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
530 lines
12 KiB
C
530 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Simple driver for Texas Instruments LM355x LED Flash driver chip
|
|
* Copyright (C) 2012 Texas Instruments
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/platform_data/leds-lm355x.h>
|
|
|
|
enum lm355x_type {
|
|
CHIP_LM3554 = 0,
|
|
CHIP_LM3556,
|
|
};
|
|
|
|
enum lm355x_regs {
|
|
REG_FLAG = 0,
|
|
REG_TORCH_CFG,
|
|
REG_TORCH_CTRL,
|
|
REG_STROBE_CFG,
|
|
REG_FLASH_CTRL,
|
|
REG_INDI_CFG,
|
|
REG_INDI_CTRL,
|
|
REG_OPMODE,
|
|
REG_MAX,
|
|
};
|
|
|
|
/* operation mode */
|
|
enum lm355x_mode {
|
|
MODE_SHDN = 0,
|
|
MODE_INDIC,
|
|
MODE_TORCH,
|
|
MODE_FLASH
|
|
};
|
|
|
|
/* register map info. */
|
|
struct lm355x_reg_data {
|
|
u8 regno;
|
|
u8 mask;
|
|
u8 shift;
|
|
};
|
|
|
|
struct lm355x_chip_data {
|
|
struct device *dev;
|
|
enum lm355x_type type;
|
|
|
|
struct led_classdev cdev_flash;
|
|
struct led_classdev cdev_torch;
|
|
struct led_classdev cdev_indicator;
|
|
|
|
struct lm355x_platform_data *pdata;
|
|
struct regmap *regmap;
|
|
struct mutex lock;
|
|
|
|
unsigned int last_flag;
|
|
struct lm355x_reg_data *regs;
|
|
};
|
|
|
|
/* specific indicator function for lm3556 */
|
|
enum lm3556_indic_pulse_time {
|
|
PULSE_TIME_0_MS = 0,
|
|
PULSE_TIME_32_MS,
|
|
PULSE_TIME_64_MS,
|
|
PULSE_TIME_92_MS,
|
|
PULSE_TIME_128_MS,
|
|
PULSE_TIME_160_MS,
|
|
PULSE_TIME_196_MS,
|
|
PULSE_TIME_224_MS,
|
|
PULSE_TIME_256_MS,
|
|
PULSE_TIME_288_MS,
|
|
PULSE_TIME_320_MS,
|
|
PULSE_TIME_352_MS,
|
|
PULSE_TIME_384_MS,
|
|
PULSE_TIME_416_MS,
|
|
PULSE_TIME_448_MS,
|
|
PULSE_TIME_480_MS,
|
|
};
|
|
|
|
enum lm3556_indic_n_blank {
|
|
INDIC_N_BLANK_0 = 0,
|
|
INDIC_N_BLANK_1,
|
|
INDIC_N_BLANK_2,
|
|
INDIC_N_BLANK_3,
|
|
INDIC_N_BLANK_4,
|
|
INDIC_N_BLANK_5,
|
|
INDIC_N_BLANK_6,
|
|
INDIC_N_BLANK_7,
|
|
INDIC_N_BLANK_8,
|
|
INDIC_N_BLANK_9,
|
|
INDIC_N_BLANK_10,
|
|
INDIC_N_BLANK_11,
|
|
INDIC_N_BLANK_12,
|
|
INDIC_N_BLANK_13,
|
|
INDIC_N_BLANK_14,
|
|
INDIC_N_BLANK_15,
|
|
};
|
|
|
|
enum lm3556_indic_period {
|
|
INDIC_PERIOD_0 = 0,
|
|
INDIC_PERIOD_1,
|
|
INDIC_PERIOD_2,
|
|
INDIC_PERIOD_3,
|
|
INDIC_PERIOD_4,
|
|
INDIC_PERIOD_5,
|
|
INDIC_PERIOD_6,
|
|
INDIC_PERIOD_7,
|
|
};
|
|
|
|
#define INDIC_PATTERN_SIZE 4
|
|
|
|
struct indicator {
|
|
u8 blinking;
|
|
u8 period_cnt;
|
|
};
|
|
|
|
/* indicator pattern data only for lm3556 */
|
|
static struct indicator indicator_pattern[INDIC_PATTERN_SIZE] = {
|
|
[0] = {(INDIC_N_BLANK_1 << 4) | PULSE_TIME_32_MS, INDIC_PERIOD_1},
|
|
[1] = {(INDIC_N_BLANK_15 << 4) | PULSE_TIME_32_MS, INDIC_PERIOD_2},
|
|
[2] = {(INDIC_N_BLANK_10 << 4) | PULSE_TIME_32_MS, INDIC_PERIOD_4},
|
|
[3] = {(INDIC_N_BLANK_5 << 4) | PULSE_TIME_32_MS, INDIC_PERIOD_7},
|
|
};
|
|
|
|
static struct lm355x_reg_data lm3554_regs[REG_MAX] = {
|
|
[REG_FLAG] = {0xD0, 0xBF, 0},
|
|
[REG_TORCH_CFG] = {0xE0, 0x80, 7},
|
|
[REG_TORCH_CTRL] = {0xA0, 0x38, 3},
|
|
[REG_STROBE_CFG] = {0xE0, 0x04, 2},
|
|
[REG_FLASH_CTRL] = {0xB0, 0x78, 3},
|
|
[REG_INDI_CFG] = {0xE0, 0x08, 3},
|
|
[REG_INDI_CTRL] = {0xA0, 0xC0, 6},
|
|
[REG_OPMODE] = {0xA0, 0x03, 0},
|
|
};
|
|
|
|
static struct lm355x_reg_data lm3556_regs[REG_MAX] = {
|
|
[REG_FLAG] = {0x0B, 0xFF, 0},
|
|
[REG_TORCH_CFG] = {0x0A, 0x10, 4},
|
|
[REG_TORCH_CTRL] = {0x09, 0x70, 4},
|
|
[REG_STROBE_CFG] = {0x0A, 0x20, 5},
|
|
[REG_FLASH_CTRL] = {0x09, 0x0F, 0},
|
|
[REG_INDI_CFG] = {0xFF, 0xFF, 0},
|
|
[REG_INDI_CTRL] = {0x09, 0x70, 4},
|
|
[REG_OPMODE] = {0x0A, 0x03, 0},
|
|
};
|
|
|
|
static char lm355x_name[][I2C_NAME_SIZE] = {
|
|
[CHIP_LM3554] = LM3554_NAME,
|
|
[CHIP_LM3556] = LM3556_NAME,
|
|
};
|
|
|
|
/* chip initialize */
|
|
static int lm355x_chip_init(struct lm355x_chip_data *chip)
|
|
{
|
|
int ret;
|
|
unsigned int reg_val;
|
|
struct lm355x_platform_data *pdata = chip->pdata;
|
|
|
|
/* input and output pins configuration */
|
|
switch (chip->type) {
|
|
case CHIP_LM3554:
|
|
reg_val = (u32)pdata->pin_tx2 | (u32)pdata->ntc_pin;
|
|
ret = regmap_update_bits(chip->regmap, 0xE0, 0x28, reg_val);
|
|
if (ret < 0)
|
|
goto out;
|
|
reg_val = (u32)pdata->pass_mode;
|
|
ret = regmap_update_bits(chip->regmap, 0xA0, 0x04, reg_val);
|
|
if (ret < 0)
|
|
goto out;
|
|
break;
|
|
|
|
case CHIP_LM3556:
|
|
reg_val = (u32)pdata->pin_tx2 | (u32)pdata->ntc_pin |
|
|
(u32)pdata->pass_mode;
|
|
ret = regmap_update_bits(chip->regmap, 0x0A, 0xC4, reg_val);
|
|
if (ret < 0)
|
|
goto out;
|
|
break;
|
|
default:
|
|
return -ENODATA;
|
|
}
|
|
|
|
return ret;
|
|
out:
|
|
dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
/* chip control */
|
|
static int lm355x_control(struct lm355x_chip_data *chip,
|
|
u8 brightness, enum lm355x_mode opmode)
|
|
{
|
|
int ret;
|
|
unsigned int reg_val;
|
|
struct lm355x_platform_data *pdata = chip->pdata;
|
|
struct lm355x_reg_data *preg = chip->regs;
|
|
|
|
ret = regmap_read(chip->regmap, preg[REG_FLAG].regno, &chip->last_flag);
|
|
if (ret < 0)
|
|
goto out;
|
|
if (chip->last_flag & preg[REG_FLAG].mask)
|
|
dev_info(chip->dev, "%s Last FLAG is 0x%x\n",
|
|
lm355x_name[chip->type],
|
|
chip->last_flag & preg[REG_FLAG].mask);
|
|
/* brightness 0 means shutdown */
|
|
if (!brightness)
|
|
opmode = MODE_SHDN;
|
|
|
|
switch (opmode) {
|
|
case MODE_TORCH:
|
|
ret =
|
|
regmap_update_bits(chip->regmap, preg[REG_TORCH_CTRL].regno,
|
|
preg[REG_TORCH_CTRL].mask,
|
|
(brightness - 1)
|
|
<< preg[REG_TORCH_CTRL].shift);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
if (pdata->pin_tx1 != LM355x_PIN_TORCH_DISABLE) {
|
|
ret =
|
|
regmap_update_bits(chip->regmap,
|
|
preg[REG_TORCH_CFG].regno,
|
|
preg[REG_TORCH_CFG].mask,
|
|
0x01 <<
|
|
preg[REG_TORCH_CFG].shift);
|
|
if (ret < 0)
|
|
goto out;
|
|
opmode = MODE_SHDN;
|
|
dev_info(chip->dev,
|
|
"torch brt is set - ext. torch pin mode\n");
|
|
}
|
|
break;
|
|
|
|
case MODE_FLASH:
|
|
|
|
ret =
|
|
regmap_update_bits(chip->regmap, preg[REG_FLASH_CTRL].regno,
|
|
preg[REG_FLASH_CTRL].mask,
|
|
(brightness - 1)
|
|
<< preg[REG_FLASH_CTRL].shift);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
if (pdata->pin_strobe != LM355x_PIN_STROBE_DISABLE) {
|
|
if (chip->type == CHIP_LM3554)
|
|
reg_val = 0x00;
|
|
else
|
|
reg_val = 0x01;
|
|
ret =
|
|
regmap_update_bits(chip->regmap,
|
|
preg[REG_STROBE_CFG].regno,
|
|
preg[REG_STROBE_CFG].mask,
|
|
reg_val <<
|
|
preg[REG_STROBE_CFG].shift);
|
|
if (ret < 0)
|
|
goto out;
|
|
opmode = MODE_SHDN;
|
|
dev_info(chip->dev,
|
|
"flash brt is set - ext. strobe pin mode\n");
|
|
}
|
|
break;
|
|
|
|
case MODE_INDIC:
|
|
ret =
|
|
regmap_update_bits(chip->regmap, preg[REG_INDI_CTRL].regno,
|
|
preg[REG_INDI_CTRL].mask,
|
|
(brightness - 1)
|
|
<< preg[REG_INDI_CTRL].shift);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
if (pdata->pin_tx2 != LM355x_PIN_TX_DISABLE) {
|
|
ret =
|
|
regmap_update_bits(chip->regmap,
|
|
preg[REG_INDI_CFG].regno,
|
|
preg[REG_INDI_CFG].mask,
|
|
0x01 <<
|
|
preg[REG_INDI_CFG].shift);
|
|
if (ret < 0)
|
|
goto out;
|
|
opmode = MODE_SHDN;
|
|
}
|
|
break;
|
|
case MODE_SHDN:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
/* operation mode control */
|
|
ret = regmap_update_bits(chip->regmap, preg[REG_OPMODE].regno,
|
|
preg[REG_OPMODE].mask,
|
|
opmode << preg[REG_OPMODE].shift);
|
|
if (ret < 0)
|
|
goto out;
|
|
return ret;
|
|
out:
|
|
dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
/* torch */
|
|
|
|
static int lm355x_torch_brightness_set(struct led_classdev *cdev,
|
|
enum led_brightness brightness)
|
|
{
|
|
struct lm355x_chip_data *chip =
|
|
container_of(cdev, struct lm355x_chip_data, cdev_torch);
|
|
int ret;
|
|
|
|
mutex_lock(&chip->lock);
|
|
ret = lm355x_control(chip, brightness, MODE_TORCH);
|
|
mutex_unlock(&chip->lock);
|
|
return ret;
|
|
}
|
|
|
|
/* flash */
|
|
|
|
static int lm355x_strobe_brightness_set(struct led_classdev *cdev,
|
|
enum led_brightness brightness)
|
|
{
|
|
struct lm355x_chip_data *chip =
|
|
container_of(cdev, struct lm355x_chip_data, cdev_flash);
|
|
int ret;
|
|
|
|
mutex_lock(&chip->lock);
|
|
ret = lm355x_control(chip, brightness, MODE_FLASH);
|
|
mutex_unlock(&chip->lock);
|
|
return ret;
|
|
}
|
|
|
|
/* indicator */
|
|
|
|
static int lm355x_indicator_brightness_set(struct led_classdev *cdev,
|
|
enum led_brightness brightness)
|
|
{
|
|
struct lm355x_chip_data *chip =
|
|
container_of(cdev, struct lm355x_chip_data, cdev_indicator);
|
|
int ret;
|
|
|
|
mutex_lock(&chip->lock);
|
|
ret = lm355x_control(chip, brightness, MODE_INDIC);
|
|
mutex_unlock(&chip->lock);
|
|
return ret;
|
|
}
|
|
|
|
/* indicator pattern only for lm3556*/
|
|
static ssize_t pattern_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t size)
|
|
{
|
|
ssize_t ret;
|
|
struct led_classdev *led_cdev = dev_get_drvdata(dev);
|
|
struct lm355x_chip_data *chip =
|
|
container_of(led_cdev, struct lm355x_chip_data, cdev_indicator);
|
|
unsigned int state;
|
|
|
|
ret = kstrtouint(buf, 10, &state);
|
|
if (ret)
|
|
goto out;
|
|
if (state > INDIC_PATTERN_SIZE - 1)
|
|
state = INDIC_PATTERN_SIZE - 1;
|
|
|
|
ret = regmap_write(chip->regmap, 0x04,
|
|
indicator_pattern[state].blinking);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
ret = regmap_write(chip->regmap, 0x05,
|
|
indicator_pattern[state].period_cnt);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
return size;
|
|
out:
|
|
dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
static DEVICE_ATTR_WO(pattern);
|
|
|
|
static struct attribute *lm355x_indicator_attrs[] = {
|
|
&dev_attr_pattern.attr,
|
|
NULL
|
|
};
|
|
ATTRIBUTE_GROUPS(lm355x_indicator);
|
|
|
|
static const struct regmap_config lm355x_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = 0xFF,
|
|
};
|
|
|
|
/* module initialize */
|
|
static int lm355x_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct lm355x_platform_data *pdata = dev_get_platdata(&client->dev);
|
|
struct lm355x_chip_data *chip;
|
|
|
|
int err;
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
|
|
dev_err(&client->dev, "i2c functionality check fail.\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (pdata == NULL) {
|
|
dev_err(&client->dev, "needs Platform Data.\n");
|
|
return -ENODATA;
|
|
}
|
|
|
|
chip = devm_kzalloc(&client->dev,
|
|
sizeof(struct lm355x_chip_data), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
chip->dev = &client->dev;
|
|
chip->type = id->driver_data;
|
|
switch (id->driver_data) {
|
|
case CHIP_LM3554:
|
|
chip->regs = lm3554_regs;
|
|
break;
|
|
case CHIP_LM3556:
|
|
chip->regs = lm3556_regs;
|
|
break;
|
|
default:
|
|
return -ENOSYS;
|
|
}
|
|
chip->pdata = pdata;
|
|
|
|
chip->regmap = devm_regmap_init_i2c(client, &lm355x_regmap);
|
|
if (IS_ERR(chip->regmap)) {
|
|
err = PTR_ERR(chip->regmap);
|
|
dev_err(&client->dev,
|
|
"Failed to allocate register map: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
mutex_init(&chip->lock);
|
|
i2c_set_clientdata(client, chip);
|
|
|
|
err = lm355x_chip_init(chip);
|
|
if (err < 0)
|
|
goto err_out;
|
|
|
|
/* flash */
|
|
chip->cdev_flash.name = "flash";
|
|
chip->cdev_flash.max_brightness = 16;
|
|
chip->cdev_flash.brightness_set_blocking = lm355x_strobe_brightness_set;
|
|
chip->cdev_flash.default_trigger = "flash";
|
|
err = led_classdev_register(&client->dev, &chip->cdev_flash);
|
|
if (err < 0)
|
|
goto err_out;
|
|
/* torch */
|
|
chip->cdev_torch.name = "torch";
|
|
chip->cdev_torch.max_brightness = 8;
|
|
chip->cdev_torch.brightness_set_blocking = lm355x_torch_brightness_set;
|
|
chip->cdev_torch.default_trigger = "torch";
|
|
err = led_classdev_register(&client->dev, &chip->cdev_torch);
|
|
if (err < 0)
|
|
goto err_create_torch_file;
|
|
/* indicator */
|
|
chip->cdev_indicator.name = "indicator";
|
|
if (id->driver_data == CHIP_LM3554)
|
|
chip->cdev_indicator.max_brightness = 4;
|
|
else
|
|
chip->cdev_indicator.max_brightness = 8;
|
|
chip->cdev_indicator.brightness_set_blocking =
|
|
lm355x_indicator_brightness_set;
|
|
/* indicator pattern control only for LM3556 */
|
|
if (id->driver_data == CHIP_LM3556)
|
|
chip->cdev_indicator.groups = lm355x_indicator_groups;
|
|
err = led_classdev_register(&client->dev, &chip->cdev_indicator);
|
|
if (err < 0)
|
|
goto err_create_indicator_file;
|
|
|
|
dev_info(&client->dev, "%s is initialized\n",
|
|
lm355x_name[id->driver_data]);
|
|
return 0;
|
|
|
|
err_create_indicator_file:
|
|
led_classdev_unregister(&chip->cdev_torch);
|
|
err_create_torch_file:
|
|
led_classdev_unregister(&chip->cdev_flash);
|
|
err_out:
|
|
return err;
|
|
}
|
|
|
|
static void lm355x_remove(struct i2c_client *client)
|
|
{
|
|
struct lm355x_chip_data *chip = i2c_get_clientdata(client);
|
|
struct lm355x_reg_data *preg = chip->regs;
|
|
|
|
regmap_write(chip->regmap, preg[REG_OPMODE].regno, 0);
|
|
led_classdev_unregister(&chip->cdev_indicator);
|
|
led_classdev_unregister(&chip->cdev_torch);
|
|
led_classdev_unregister(&chip->cdev_flash);
|
|
dev_info(&client->dev, "%s is removed\n", lm355x_name[chip->type]);
|
|
}
|
|
|
|
static const struct i2c_device_id lm355x_id[] = {
|
|
{LM3554_NAME, CHIP_LM3554},
|
|
{LM3556_NAME, CHIP_LM3556},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, lm355x_id);
|
|
|
|
static struct i2c_driver lm355x_i2c_driver = {
|
|
.driver = {
|
|
.name = LM355x_NAME,
|
|
.pm = NULL,
|
|
},
|
|
.probe = lm355x_probe,
|
|
.remove = lm355x_remove,
|
|
.id_table = lm355x_id,
|
|
};
|
|
|
|
module_i2c_driver(lm355x_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM355x");
|
|
MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>");
|
|
MODULE_AUTHOR("G.Shark Jeong <gshark.jeong@gmail.com>");
|
|
MODULE_LICENSE("GPL v2");
|