mirror of
https://github.com/torvalds/linux.git
synced 2024-11-25 13:41:51 +00:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
1113 lines
34 KiB
C
1113 lines
34 KiB
C
/*
|
|
* This file contains the driver for an XT hard disk controller
|
|
* (at least the DTC 5150X) for Linux.
|
|
*
|
|
* Author: Pat Mackinlay, pat@it.com.au
|
|
* Date: 29/09/92
|
|
*
|
|
* Revised: 01/01/93, ...
|
|
*
|
|
* Ref: DTC 5150X Controller Specification (thanks to Kevin Fowler,
|
|
* kevinf@agora.rain.com)
|
|
* Also thanks to: Salvador Abreu, Dave Thaler, Risto Kankkunen and
|
|
* Wim Van Dorst.
|
|
*
|
|
* Revised: 04/04/94 by Risto Kankkunen
|
|
* Moved the detection code from xd_init() to xd_geninit() as it needed
|
|
* interrupts enabled and Linus didn't want to enable them in that first
|
|
* phase. xd_geninit() is the place to do these kinds of things anyway,
|
|
* he says.
|
|
*
|
|
* Modularized: 04/10/96 by Todd Fries, tfries@umr.edu
|
|
*
|
|
* Revised: 13/12/97 by Andrzej Krzysztofowicz, ankry@mif.pg.gda.pl
|
|
* Fixed some problems with disk initialization and module initiation.
|
|
* Added support for manual geometry setting (except Seagate controllers)
|
|
* in form:
|
|
* xd_geo=<cyl_xda>,<head_xda>,<sec_xda>[,<cyl_xdb>,<head_xdb>,<sec_xdb>]
|
|
* Recovered DMA access. Abridged messages. Added support for DTC5051CX,
|
|
* WD1002-27X & XEBEC controllers. Driver uses now some jumper settings.
|
|
* Extended ioctl() support.
|
|
*
|
|
* Bugfix: 15/02/01, Paul G. - inform queue layer of tiny xd_maxsect.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/genhd.h>
|
|
#include <linux/hdreg.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/blkpg.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/io.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/dma.h>
|
|
|
|
#include "xd.h"
|
|
|
|
static void __init do_xd_setup (int *integers);
|
|
#ifdef MODULE
|
|
static int xd[5] = { -1,-1,-1,-1, };
|
|
#endif
|
|
|
|
#define XD_DONT_USE_DMA 0 /* Initial value. may be overriden using
|
|
"nodma" module option */
|
|
#define XD_INIT_DISK_DELAY (30*HZ/1000) /* 30 ms delay during disk initialization */
|
|
|
|
/* Above may need to be increased if a problem with the 2nd drive detection
|
|
(ST11M controller) or resetting a controller (WD) appears */
|
|
|
|
static XD_INFO xd_info[XD_MAXDRIVES];
|
|
|
|
/* If you try this driver and find that your card is not detected by the driver at bootup, you need to add your BIOS
|
|
signature and details to the following list of signatures. A BIOS signature is a string embedded into the first
|
|
few bytes of your controller's on-board ROM BIOS. To find out what yours is, use something like MS-DOS's DEBUG
|
|
command. Run DEBUG, and then you can examine your BIOS signature with:
|
|
|
|
d xxxx:0000
|
|
|
|
where xxxx is the segment of your controller (like C800 or D000 or something). On the ASCII dump at the right, you should
|
|
be able to see a string mentioning the manufacturer's copyright etc. Add this string into the table below. The parameters
|
|
in the table are, in order:
|
|
|
|
offset ; this is the offset (in bytes) from the start of your ROM where the signature starts
|
|
signature ; this is the actual text of the signature
|
|
xd_?_init_controller ; this is the controller init routine used by your controller
|
|
xd_?_init_drive ; this is the drive init routine used by your controller
|
|
|
|
The controllers directly supported at the moment are: DTC 5150x, WD 1004A27X, ST11M/R and override. If your controller is
|
|
made by the same manufacturer as one of these, try using the same init routines as they do. If that doesn't work, your
|
|
best bet is to use the "override" routines. These routines use a "portable" method of getting the disk's geometry, and
|
|
may work with your card. If none of these seem to work, try sending me some email and I'll see what I can do <grin>.
|
|
|
|
NOTE: You can now specify your XT controller's parameters from the command line in the form xd=TYPE,IRQ,IO,DMA. The driver
|
|
should be able to detect your drive's geometry from this info. (eg: xd=0,5,0x320,3 is the "standard"). */
|
|
|
|
#include <asm/page.h>
|
|
#define xd_dma_mem_alloc(size) __get_dma_pages(GFP_KERNEL,get_order(size))
|
|
#define xd_dma_mem_free(addr, size) free_pages(addr, get_order(size))
|
|
static char *xd_dma_buffer;
|
|
|
|
static XD_SIGNATURE xd_sigs[] __initdata = {
|
|
{ 0x0000,"Override geometry handler",NULL,xd_override_init_drive,"n unknown" }, /* Pat Mackinlay, pat@it.com.au */
|
|
{ 0x0008,"[BXD06 (C) DTC 17-MAY-1985]",xd_dtc_init_controller,xd_dtc5150cx_init_drive," DTC 5150CX" }, /* Andrzej Krzysztofowicz, ankry@mif.pg.gda.pl */
|
|
{ 0x000B,"CRD18A Not an IBM rom. (C) Copyright Data Technology Corp. 05/31/88",xd_dtc_init_controller,xd_dtc_init_drive," DTC 5150X" }, /* Todd Fries, tfries@umr.edu */
|
|
{ 0x000B,"CXD23A Not an IBM ROM (C)Copyright Data Technology Corp 12/03/88",xd_dtc_init_controller,xd_dtc_init_drive," DTC 5150X" }, /* Pat Mackinlay, pat@it.com.au */
|
|
{ 0x0008,"07/15/86(C) Copyright 1986 Western Digital Corp.",xd_wd_init_controller,xd_wd_init_drive," Western Dig. 1002-27X" }, /* Andrzej Krzysztofowicz, ankry@mif.pg.gda.pl */
|
|
{ 0x0008,"06/24/88(C) Copyright 1988 Western Digital Corp.",xd_wd_init_controller,xd_wd_init_drive," Western Dig. WDXT-GEN2" }, /* Dan Newcombe, newcombe@aa.csc.peachnet.edu */
|
|
{ 0x0015,"SEAGATE ST11 BIOS REVISION",xd_seagate_init_controller,xd_seagate_init_drive," Seagate ST11M/R" }, /* Salvador Abreu, spa@fct.unl.pt */
|
|
{ 0x0010,"ST11R BIOS",xd_seagate_init_controller,xd_seagate_init_drive," Seagate ST11M/R" }, /* Risto Kankkunen, risto.kankkunen@cs.helsinki.fi */
|
|
{ 0x0010,"ST11 BIOS v1.7",xd_seagate_init_controller,xd_seagate_init_drive," Seagate ST11R" }, /* Alan Hourihane, alanh@fairlite.demon.co.uk */
|
|
{ 0x1000,"(c)Copyright 1987 SMS",xd_omti_init_controller,xd_omti_init_drive,"n OMTI 5520" }, /* Dirk Melchers, dirk@merlin.nbg.sub.org */
|
|
{ 0x0006,"COPYRIGHT XEBEC (C) 1984",xd_xebec_init_controller,xd_xebec_init_drive," XEBEC" }, /* Andrzej Krzysztofowicz, ankry@mif.pg.gda.pl */
|
|
{ 0x0008,"(C) Copyright 1984 Western Digital Corp", xd_wd_init_controller, xd_wd_init_drive," Western Dig. 1002s-wx2" },
|
|
{ 0x0008,"(C) Copyright 1986 Western Digital Corporation", xd_wd_init_controller, xd_wd_init_drive," 1986 Western Digital" }, /* jfree@sovereign.org */
|
|
};
|
|
|
|
static unsigned int xd_bases[] __initdata =
|
|
{
|
|
0xC8000, 0xCA000, 0xCC000,
|
|
0xCE000, 0xD0000, 0xD2000,
|
|
0xD4000, 0xD6000, 0xD8000,
|
|
0xDA000, 0xDC000, 0xDE000,
|
|
0xE0000
|
|
};
|
|
|
|
static DEFINE_SPINLOCK(xd_lock);
|
|
|
|
static struct gendisk *xd_gendisk[2];
|
|
|
|
static struct block_device_operations xd_fops = {
|
|
.owner = THIS_MODULE,
|
|
.ioctl = xd_ioctl,
|
|
};
|
|
static DECLARE_WAIT_QUEUE_HEAD(xd_wait_int);
|
|
static u_char xd_drives, xd_irq = 5, xd_dma = 3, xd_maxsectors;
|
|
static u_char xd_override __initdata = 0, xd_type __initdata = 0;
|
|
static u_short xd_iobase = 0x320;
|
|
static int xd_geo[XD_MAXDRIVES*3] __initdata = { 0, };
|
|
|
|
static volatile int xdc_busy;
|
|
static struct timer_list xd_watchdog_int;
|
|
|
|
static volatile u_char xd_error;
|
|
static int nodma = XD_DONT_USE_DMA;
|
|
|
|
static struct request_queue *xd_queue;
|
|
|
|
/* xd_init: register the block device number and set up pointer tables */
|
|
static int __init xd_init(void)
|
|
{
|
|
u_char i,controller;
|
|
unsigned int address;
|
|
int err;
|
|
|
|
#ifdef MODULE
|
|
{
|
|
u_char count = 0;
|
|
for (i = 4; i > 0; i--)
|
|
if (((xd[i] = xd[i-1]) >= 0) && !count)
|
|
count = i;
|
|
if ((xd[0] = count))
|
|
do_xd_setup(xd);
|
|
}
|
|
#endif
|
|
|
|
init_timer (&xd_watchdog_int); xd_watchdog_int.function = xd_watchdog;
|
|
|
|
if (!xd_dma_buffer)
|
|
xd_dma_buffer = (char *)xd_dma_mem_alloc(xd_maxsectors * 0x200);
|
|
if (!xd_dma_buffer) {
|
|
printk(KERN_ERR "xd: Out of memory.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
err = -EBUSY;
|
|
if (register_blkdev(XT_DISK_MAJOR, "xd"))
|
|
goto out1;
|
|
|
|
err = -ENOMEM;
|
|
xd_queue = blk_init_queue(do_xd_request, &xd_lock);
|
|
if (!xd_queue)
|
|
goto out1a;
|
|
|
|
if (xd_detect(&controller,&address)) {
|
|
|
|
printk("Detected a%s controller (type %d) at address %06x\n",
|
|
xd_sigs[controller].name,controller,address);
|
|
if (!request_region(xd_iobase,4,"xd")) {
|
|
printk("xd: Ports at 0x%x are not available\n",
|
|
xd_iobase);
|
|
goto out2;
|
|
}
|
|
if (controller)
|
|
xd_sigs[controller].init_controller(address);
|
|
xd_drives = xd_initdrives(xd_sigs[controller].init_drive);
|
|
|
|
printk("Detected %d hard drive%s (using IRQ%d & DMA%d)\n",
|
|
xd_drives,xd_drives == 1 ? "" : "s",xd_irq,xd_dma);
|
|
}
|
|
|
|
err = -ENODEV;
|
|
if (!xd_drives)
|
|
goto out3;
|
|
|
|
for (i = 0; i < xd_drives; i++) {
|
|
XD_INFO *p = &xd_info[i];
|
|
struct gendisk *disk = alloc_disk(64);
|
|
if (!disk)
|
|
goto Enomem;
|
|
p->unit = i;
|
|
disk->major = XT_DISK_MAJOR;
|
|
disk->first_minor = i<<6;
|
|
sprintf(disk->disk_name, "xd%c", i+'a');
|
|
sprintf(disk->devfs_name, "xd/target%d", i);
|
|
disk->fops = &xd_fops;
|
|
disk->private_data = p;
|
|
disk->queue = xd_queue;
|
|
set_capacity(disk, p->heads * p->cylinders * p->sectors);
|
|
printk(" %s: CHS=%d/%d/%d\n", disk->disk_name,
|
|
p->cylinders, p->heads, p->sectors);
|
|
xd_gendisk[i] = disk;
|
|
}
|
|
|
|
err = -EBUSY;
|
|
if (request_irq(xd_irq,xd_interrupt_handler, 0, "XT hard disk", NULL)) {
|
|
printk("xd: unable to get IRQ%d\n",xd_irq);
|
|
goto out4;
|
|
}
|
|
|
|
if (request_dma(xd_dma,"xd")) {
|
|
printk("xd: unable to get DMA%d\n",xd_dma);
|
|
goto out5;
|
|
}
|
|
|
|
/* xd_maxsectors depends on controller - so set after detection */
|
|
blk_queue_max_sectors(xd_queue, xd_maxsectors);
|
|
|
|
for (i = 0; i < xd_drives; i++)
|
|
add_disk(xd_gendisk[i]);
|
|
|
|
return 0;
|
|
|
|
out5:
|
|
free_irq(xd_irq, NULL);
|
|
out4:
|
|
for (i = 0; i < xd_drives; i++)
|
|
put_disk(xd_gendisk[i]);
|
|
out3:
|
|
release_region(xd_iobase,4);
|
|
out2:
|
|
blk_cleanup_queue(xd_queue);
|
|
out1a:
|
|
unregister_blkdev(XT_DISK_MAJOR, "xd");
|
|
out1:
|
|
if (xd_dma_buffer)
|
|
xd_dma_mem_free((unsigned long)xd_dma_buffer,
|
|
xd_maxsectors * 0x200);
|
|
return err;
|
|
Enomem:
|
|
err = -ENOMEM;
|
|
while (i--)
|
|
put_disk(xd_gendisk[i]);
|
|
goto out3;
|
|
}
|
|
|
|
/* xd_detect: scan the possible BIOS ROM locations for the signature strings */
|
|
static u_char __init xd_detect (u_char *controller, unsigned int *address)
|
|
{
|
|
int i, j;
|
|
|
|
if (xd_override)
|
|
{
|
|
*controller = xd_type;
|
|
*address = 0;
|
|
return(1);
|
|
}
|
|
|
|
for (i = 0; i < (sizeof(xd_bases) / sizeof(xd_bases[0])); i++) {
|
|
void __iomem *p = ioremap(xd_bases[i], 0x2000);
|
|
if (!p)
|
|
continue;
|
|
for (j = 1; j < (sizeof(xd_sigs) / sizeof(xd_sigs[0])); j++) {
|
|
const char *s = xd_sigs[j].string;
|
|
if (check_signature(p + xd_sigs[j].offset, s, strlen(s))) {
|
|
*controller = j;
|
|
xd_type = j;
|
|
*address = xd_bases[i];
|
|
iounmap(p);
|
|
return 1;
|
|
}
|
|
}
|
|
iounmap(p);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* do_xd_request: handle an incoming request */
|
|
static void do_xd_request (request_queue_t * q)
|
|
{
|
|
struct request *req;
|
|
|
|
if (xdc_busy)
|
|
return;
|
|
|
|
while ((req = elv_next_request(q)) != NULL) {
|
|
unsigned block = req->sector;
|
|
unsigned count = req->nr_sectors;
|
|
int rw = rq_data_dir(req);
|
|
XD_INFO *disk = req->rq_disk->private_data;
|
|
int res = 0;
|
|
int retry;
|
|
|
|
if (!(req->flags & REQ_CMD)) {
|
|
end_request(req, 0);
|
|
continue;
|
|
}
|
|
if (block + count > get_capacity(req->rq_disk)) {
|
|
end_request(req, 0);
|
|
continue;
|
|
}
|
|
if (rw != READ && rw != WRITE) {
|
|
printk("do_xd_request: unknown request\n");
|
|
end_request(req, 0);
|
|
continue;
|
|
}
|
|
for (retry = 0; (retry < XD_RETRIES) && !res; retry++)
|
|
res = xd_readwrite(rw, disk, req->buffer, block, count);
|
|
end_request(req, res); /* wrap up, 0 = fail, 1 = success */
|
|
}
|
|
}
|
|
|
|
/* xd_ioctl: handle device ioctl's */
|
|
static int xd_ioctl (struct inode *inode,struct file *file,u_int cmd,u_long arg)
|
|
{
|
|
XD_INFO *p = inode->i_bdev->bd_disk->private_data;
|
|
|
|
switch (cmd) {
|
|
case HDIO_GETGEO:
|
|
{
|
|
struct hd_geometry g;
|
|
struct hd_geometry __user *geom= (void __user *)arg;
|
|
g.heads = p->heads;
|
|
g.sectors = p->sectors;
|
|
g.cylinders = p->cylinders;
|
|
g.start = get_start_sect(inode->i_bdev);
|
|
return copy_to_user(geom, &g, sizeof(g)) ? -EFAULT : 0;
|
|
}
|
|
case HDIO_SET_DMA:
|
|
if (!capable(CAP_SYS_ADMIN)) return -EACCES;
|
|
if (xdc_busy) return -EBUSY;
|
|
nodma = !arg;
|
|
if (nodma && xd_dma_buffer) {
|
|
xd_dma_mem_free((unsigned long)xd_dma_buffer,
|
|
xd_maxsectors * 0x200);
|
|
xd_dma_buffer = NULL;
|
|
} else if (!nodma && !xd_dma_buffer) {
|
|
xd_dma_buffer = (char *)xd_dma_mem_alloc(xd_maxsectors * 0x200);
|
|
if (!xd_dma_buffer) {
|
|
nodma = XD_DONT_USE_DMA;
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
return 0;
|
|
case HDIO_GET_DMA:
|
|
return put_user(!nodma, (long __user *) arg);
|
|
case HDIO_GET_MULTCOUNT:
|
|
return put_user(xd_maxsectors, (long __user *) arg);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* xd_readwrite: handle a read/write request */
|
|
static int xd_readwrite (u_char operation,XD_INFO *p,char *buffer,u_int block,u_int count)
|
|
{
|
|
int drive = p->unit;
|
|
u_char cmdblk[6],sense[4];
|
|
u_short track,cylinder;
|
|
u_char head,sector,control,mode = PIO_MODE,temp;
|
|
char **real_buffer;
|
|
register int i;
|
|
|
|
#ifdef DEBUG_READWRITE
|
|
printk("xd_readwrite: operation = %s, drive = %d, buffer = 0x%X, block = %d, count = %d\n",operation == READ ? "read" : "write",drive,buffer,block,count);
|
|
#endif /* DEBUG_READWRITE */
|
|
|
|
spin_unlock_irq(&xd_lock);
|
|
|
|
control = p->control;
|
|
if (!xd_dma_buffer)
|
|
xd_dma_buffer = (char *)xd_dma_mem_alloc(xd_maxsectors * 0x200);
|
|
while (count) {
|
|
temp = count < xd_maxsectors ? count : xd_maxsectors;
|
|
|
|
track = block / p->sectors;
|
|
head = track % p->heads;
|
|
cylinder = track / p->heads;
|
|
sector = block % p->sectors;
|
|
|
|
#ifdef DEBUG_READWRITE
|
|
printk("xd_readwrite: drive = %d, head = %d, cylinder = %d, sector = %d, count = %d\n",drive,head,cylinder,sector,temp);
|
|
#endif /* DEBUG_READWRITE */
|
|
|
|
if (xd_dma_buffer) {
|
|
mode = xd_setup_dma(operation == READ ? DMA_MODE_READ : DMA_MODE_WRITE,(u_char *)(xd_dma_buffer),temp * 0x200);
|
|
real_buffer = &xd_dma_buffer;
|
|
for (i=0; i < (temp * 0x200); i++)
|
|
xd_dma_buffer[i] = buffer[i];
|
|
}
|
|
else
|
|
real_buffer = &buffer;
|
|
|
|
xd_build(cmdblk,operation == READ ? CMD_READ : CMD_WRITE,drive,head,cylinder,sector,temp & 0xFF,control);
|
|
|
|
switch (xd_command(cmdblk,mode,(u_char *)(*real_buffer),(u_char *)(*real_buffer),sense,XD_TIMEOUT)) {
|
|
case 1:
|
|
printk("xd%c: %s timeout, recalibrating drive\n",'a'+drive,(operation == READ ? "read" : "write"));
|
|
xd_recalibrate(drive);
|
|
spin_lock_irq(&xd_lock);
|
|
return (0);
|
|
case 2:
|
|
if (sense[0] & 0x30) {
|
|
printk("xd%c: %s - ",'a'+drive,(operation == READ ? "reading" : "writing"));
|
|
switch ((sense[0] & 0x30) >> 4) {
|
|
case 0: printk("drive error, code = 0x%X",sense[0] & 0x0F);
|
|
break;
|
|
case 1: printk("controller error, code = 0x%X",sense[0] & 0x0F);
|
|
break;
|
|
case 2: printk("command error, code = 0x%X",sense[0] & 0x0F);
|
|
break;
|
|
case 3: printk("miscellaneous error, code = 0x%X",sense[0] & 0x0F);
|
|
break;
|
|
}
|
|
}
|
|
if (sense[0] & 0x80)
|
|
printk(" - CHS = %d/%d/%d\n",((sense[2] & 0xC0) << 2) | sense[3],sense[1] & 0x1F,sense[2] & 0x3F);
|
|
/* reported drive number = (sense[1] & 0xE0) >> 5 */
|
|
else
|
|
printk(" - no valid disk address\n");
|
|
spin_lock_irq(&xd_lock);
|
|
return (0);
|
|
}
|
|
if (xd_dma_buffer)
|
|
for (i=0; i < (temp * 0x200); i++)
|
|
buffer[i] = xd_dma_buffer[i];
|
|
|
|
count -= temp, buffer += temp * 0x200, block += temp;
|
|
}
|
|
spin_lock_irq(&xd_lock);
|
|
return (1);
|
|
}
|
|
|
|
/* xd_recalibrate: recalibrate a given drive and reset controller if necessary */
|
|
static void xd_recalibrate (u_char drive)
|
|
{
|
|
u_char cmdblk[6];
|
|
|
|
xd_build(cmdblk,CMD_RECALIBRATE,drive,0,0,0,0,0);
|
|
if (xd_command(cmdblk,PIO_MODE,NULL,NULL,NULL,XD_TIMEOUT * 8))
|
|
printk("xd%c: warning! error recalibrating, controller may be unstable\n", 'a'+drive);
|
|
}
|
|
|
|
/* xd_interrupt_handler: interrupt service routine */
|
|
static irqreturn_t xd_interrupt_handler(int irq, void *dev_id,
|
|
struct pt_regs *regs)
|
|
{
|
|
if (inb(XD_STATUS) & STAT_INTERRUPT) { /* check if it was our device */
|
|
#ifdef DEBUG_OTHER
|
|
printk("xd_interrupt_handler: interrupt detected\n");
|
|
#endif /* DEBUG_OTHER */
|
|
outb(0,XD_CONTROL); /* acknowledge interrupt */
|
|
wake_up(&xd_wait_int); /* and wake up sleeping processes */
|
|
return IRQ_HANDLED;
|
|
}
|
|
else
|
|
printk("xd: unexpected interrupt\n");
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
/* xd_setup_dma: set up the DMA controller for a data transfer */
|
|
static u_char xd_setup_dma (u_char mode,u_char *buffer,u_int count)
|
|
{
|
|
unsigned long f;
|
|
|
|
if (nodma)
|
|
return (PIO_MODE);
|
|
if (((unsigned long) buffer & 0xFFFF0000) != (((unsigned long) buffer + count) & 0xFFFF0000)) {
|
|
#ifdef DEBUG_OTHER
|
|
printk("xd_setup_dma: using PIO, transfer overlaps 64k boundary\n");
|
|
#endif /* DEBUG_OTHER */
|
|
return (PIO_MODE);
|
|
}
|
|
|
|
f=claim_dma_lock();
|
|
disable_dma(xd_dma);
|
|
clear_dma_ff(xd_dma);
|
|
set_dma_mode(xd_dma,mode);
|
|
set_dma_addr(xd_dma, (unsigned long) buffer);
|
|
set_dma_count(xd_dma,count);
|
|
|
|
release_dma_lock(f);
|
|
|
|
return (DMA_MODE); /* use DMA and INT */
|
|
}
|
|
|
|
/* xd_build: put stuff into an array in a format suitable for the controller */
|
|
static u_char *xd_build (u_char *cmdblk,u_char command,u_char drive,u_char head,u_short cylinder,u_char sector,u_char count,u_char control)
|
|
{
|
|
cmdblk[0] = command;
|
|
cmdblk[1] = ((drive & 0x07) << 5) | (head & 0x1F);
|
|
cmdblk[2] = ((cylinder & 0x300) >> 2) | (sector & 0x3F);
|
|
cmdblk[3] = cylinder & 0xFF;
|
|
cmdblk[4] = count;
|
|
cmdblk[5] = control;
|
|
|
|
return (cmdblk);
|
|
}
|
|
|
|
static void xd_watchdog (unsigned long unused)
|
|
{
|
|
xd_error = 1;
|
|
wake_up(&xd_wait_int);
|
|
}
|
|
|
|
/* xd_waitport: waits until port & mask == flags or a timeout occurs. return 1 for a timeout */
|
|
static inline u_char xd_waitport (u_short port,u_char flags,u_char mask,u_long timeout)
|
|
{
|
|
u_long expiry = jiffies + timeout;
|
|
int success;
|
|
|
|
xdc_busy = 1;
|
|
while ((success = ((inb(port) & mask) != flags)) && time_before(jiffies, expiry)) {
|
|
set_current_state(TASK_UNINTERRUPTIBLE);
|
|
schedule_timeout(1);
|
|
}
|
|
xdc_busy = 0;
|
|
return (success);
|
|
}
|
|
|
|
static inline u_int xd_wait_for_IRQ (void)
|
|
{
|
|
unsigned long flags;
|
|
xd_watchdog_int.expires = jiffies + 8 * HZ;
|
|
add_timer(&xd_watchdog_int);
|
|
|
|
flags=claim_dma_lock();
|
|
enable_dma(xd_dma);
|
|
release_dma_lock(flags);
|
|
|
|
sleep_on(&xd_wait_int);
|
|
del_timer(&xd_watchdog_int);
|
|
xdc_busy = 0;
|
|
|
|
flags=claim_dma_lock();
|
|
disable_dma(xd_dma);
|
|
release_dma_lock(flags);
|
|
|
|
if (xd_error) {
|
|
printk("xd: missed IRQ - command aborted\n");
|
|
xd_error = 0;
|
|
return (1);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/* xd_command: handle all data transfers necessary for a single command */
|
|
static u_int xd_command (u_char *command,u_char mode,u_char *indata,u_char *outdata,u_char *sense,u_long timeout)
|
|
{
|
|
u_char cmdblk[6],csb,complete = 0;
|
|
|
|
#ifdef DEBUG_COMMAND
|
|
printk("xd_command: command = 0x%X, mode = 0x%X, indata = 0x%X, outdata = 0x%X, sense = 0x%X\n",command,mode,indata,outdata,sense);
|
|
#endif /* DEBUG_COMMAND */
|
|
|
|
outb(0,XD_SELECT);
|
|
outb(mode,XD_CONTROL);
|
|
|
|
if (xd_waitport(XD_STATUS,STAT_SELECT,STAT_SELECT,timeout))
|
|
return (1);
|
|
|
|
while (!complete) {
|
|
if (xd_waitport(XD_STATUS,STAT_READY,STAT_READY,timeout))
|
|
return (1);
|
|
|
|
switch (inb(XD_STATUS) & (STAT_COMMAND | STAT_INPUT)) {
|
|
case 0:
|
|
if (mode == DMA_MODE) {
|
|
if (xd_wait_for_IRQ())
|
|
return (1);
|
|
} else
|
|
outb(outdata ? *outdata++ : 0,XD_DATA);
|
|
break;
|
|
case STAT_INPUT:
|
|
if (mode == DMA_MODE) {
|
|
if (xd_wait_for_IRQ())
|
|
return (1);
|
|
} else
|
|
if (indata)
|
|
*indata++ = inb(XD_DATA);
|
|
else
|
|
inb(XD_DATA);
|
|
break;
|
|
case STAT_COMMAND:
|
|
outb(command ? *command++ : 0,XD_DATA);
|
|
break;
|
|
case STAT_COMMAND | STAT_INPUT:
|
|
complete = 1;
|
|
break;
|
|
}
|
|
}
|
|
csb = inb(XD_DATA);
|
|
|
|
if (xd_waitport(XD_STATUS,0,STAT_SELECT,timeout)) /* wait until deselected */
|
|
return (1);
|
|
|
|
if (csb & CSB_ERROR) { /* read sense data if error */
|
|
xd_build(cmdblk,CMD_SENSE,(csb & CSB_LUN) >> 5,0,0,0,0,0);
|
|
if (xd_command(cmdblk,0,sense,NULL,NULL,XD_TIMEOUT))
|
|
printk("xd: warning! sense command failed!\n");
|
|
}
|
|
|
|
#ifdef DEBUG_COMMAND
|
|
printk("xd_command: completed with csb = 0x%X\n",csb);
|
|
#endif /* DEBUG_COMMAND */
|
|
|
|
return (csb & CSB_ERROR);
|
|
}
|
|
|
|
static u_char __init xd_initdrives (void (*init_drive)(u_char drive))
|
|
{
|
|
u_char cmdblk[6],i,count = 0;
|
|
|
|
for (i = 0; i < XD_MAXDRIVES; i++) {
|
|
xd_build(cmdblk,CMD_TESTREADY,i,0,0,0,0,0);
|
|
if (!xd_command(cmdblk,PIO_MODE,NULL,NULL,NULL,XD_TIMEOUT*8)) {
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
schedule_timeout(XD_INIT_DISK_DELAY);
|
|
|
|
init_drive(count);
|
|
count++;
|
|
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
schedule_timeout(XD_INIT_DISK_DELAY);
|
|
}
|
|
}
|
|
return (count);
|
|
}
|
|
|
|
static void __init xd_manual_geo_set (u_char drive)
|
|
{
|
|
xd_info[drive].heads = (u_char)(xd_geo[3 * drive + 1]);
|
|
xd_info[drive].cylinders = (u_short)(xd_geo[3 * drive]);
|
|
xd_info[drive].sectors = (u_char)(xd_geo[3 * drive + 2]);
|
|
}
|
|
|
|
static void __init xd_dtc_init_controller (unsigned int address)
|
|
{
|
|
switch (address) {
|
|
case 0x00000:
|
|
case 0xC8000: break; /*initial: 0x320 */
|
|
case 0xCA000: xd_iobase = 0x324;
|
|
case 0xD0000: /*5150CX*/
|
|
case 0xD8000: break; /*5150CX & 5150XL*/
|
|
default: printk("xd_dtc_init_controller: unsupported BIOS address %06x\n",address);
|
|
break;
|
|
}
|
|
xd_maxsectors = 0x01; /* my card seems to have trouble doing multi-block transfers? */
|
|
|
|
outb(0,XD_RESET); /* reset the controller */
|
|
}
|
|
|
|
|
|
static void __init xd_dtc5150cx_init_drive (u_char drive)
|
|
{
|
|
/* values from controller's BIOS - BIOS chip may be removed */
|
|
static u_short geometry_table[][4] = {
|
|
{0x200,8,0x200,0x100},
|
|
{0x267,2,0x267,0x267},
|
|
{0x264,4,0x264,0x80},
|
|
{0x132,4,0x132,0x0},
|
|
{0x132,2,0x80, 0x132},
|
|
{0x177,8,0x177,0x0},
|
|
{0x132,8,0x84, 0x0},
|
|
{}, /* not used */
|
|
{0x132,6,0x80, 0x100},
|
|
{0x200,6,0x100,0x100},
|
|
{0x264,2,0x264,0x80},
|
|
{0x280,4,0x280,0x100},
|
|
{0x2B9,3,0x2B9,0x2B9},
|
|
{0x2B9,5,0x2B9,0x2B9},
|
|
{0x280,6,0x280,0x100},
|
|
{0x132,4,0x132,0x0}};
|
|
u_char n;
|
|
|
|
n = inb(XD_JUMPER);
|
|
n = (drive ? n : (n >> 2)) & 0x33;
|
|
n = (n | (n >> 2)) & 0x0F;
|
|
if (xd_geo[3*drive])
|
|
xd_manual_geo_set(drive);
|
|
else
|
|
if (n != 7) {
|
|
xd_info[drive].heads = (u_char)(geometry_table[n][1]); /* heads */
|
|
xd_info[drive].cylinders = geometry_table[n][0]; /* cylinders */
|
|
xd_info[drive].sectors = 17; /* sectors */
|
|
#if 0
|
|
xd_info[drive].rwrite = geometry_table[n][2]; /* reduced write */
|
|
xd_info[drive].precomp = geometry_table[n][3] /* write precomp */
|
|
xd_info[drive].ecc = 0x0B; /* ecc length */
|
|
#endif /* 0 */
|
|
}
|
|
else {
|
|
printk("xd%c: undetermined drive geometry\n",'a'+drive);
|
|
return;
|
|
}
|
|
xd_info[drive].control = 5; /* control byte */
|
|
xd_setparam(CMD_DTCSETPARAM,drive,xd_info[drive].heads,xd_info[drive].cylinders,geometry_table[n][2],geometry_table[n][3],0x0B);
|
|
xd_recalibrate(drive);
|
|
}
|
|
|
|
static void __init xd_dtc_init_drive (u_char drive)
|
|
{
|
|
u_char cmdblk[6],buf[64];
|
|
|
|
xd_build(cmdblk,CMD_DTCGETGEOM,drive,0,0,0,0,0);
|
|
if (!xd_command(cmdblk,PIO_MODE,buf,NULL,NULL,XD_TIMEOUT * 2)) {
|
|
xd_info[drive].heads = buf[0x0A]; /* heads */
|
|
xd_info[drive].cylinders = ((u_short *) (buf))[0x04]; /* cylinders */
|
|
xd_info[drive].sectors = 17; /* sectors */
|
|
if (xd_geo[3*drive])
|
|
xd_manual_geo_set(drive);
|
|
#if 0
|
|
xd_info[drive].rwrite = ((u_short *) (buf + 1))[0x05]; /* reduced write */
|
|
xd_info[drive].precomp = ((u_short *) (buf + 1))[0x06]; /* write precomp */
|
|
xd_info[drive].ecc = buf[0x0F]; /* ecc length */
|
|
#endif /* 0 */
|
|
xd_info[drive].control = 0; /* control byte */
|
|
|
|
xd_setparam(CMD_DTCSETPARAM,drive,xd_info[drive].heads,xd_info[drive].cylinders,((u_short *) (buf + 1))[0x05],((u_short *) (buf + 1))[0x06],buf[0x0F]);
|
|
xd_build(cmdblk,CMD_DTCSETSTEP,drive,0,0,0,0,7);
|
|
if (xd_command(cmdblk,PIO_MODE,NULL,NULL,NULL,XD_TIMEOUT * 2))
|
|
printk("xd_dtc_init_drive: error setting step rate for xd%c\n", 'a'+drive);
|
|
}
|
|
else
|
|
printk("xd_dtc_init_drive: error reading geometry for xd%c\n", 'a'+drive);
|
|
}
|
|
|
|
static void __init xd_wd_init_controller (unsigned int address)
|
|
{
|
|
switch (address) {
|
|
case 0x00000:
|
|
case 0xC8000: break; /*initial: 0x320 */
|
|
case 0xCA000: xd_iobase = 0x324; break;
|
|
case 0xCC000: xd_iobase = 0x328; break;
|
|
case 0xCE000: xd_iobase = 0x32C; break;
|
|
case 0xD0000: xd_iobase = 0x328; break; /* ? */
|
|
case 0xD8000: xd_iobase = 0x32C; break; /* ? */
|
|
default: printk("xd_wd_init_controller: unsupported BIOS address %06x\n",address);
|
|
break;
|
|
}
|
|
xd_maxsectors = 0x01; /* this one doesn't wrap properly either... */
|
|
|
|
outb(0,XD_RESET); /* reset the controller */
|
|
|
|
set_current_state(TASK_UNINTERRUPTIBLE);
|
|
schedule_timeout(XD_INIT_DISK_DELAY);
|
|
}
|
|
|
|
static void __init xd_wd_init_drive (u_char drive)
|
|
{
|
|
/* values from controller's BIOS - BIOS may be disabled */
|
|
static u_short geometry_table[][4] = {
|
|
{0x264,4,0x1C2,0x1C2}, /* common part */
|
|
{0x132,4,0x099,0x0},
|
|
{0x267,2,0x1C2,0x1C2},
|
|
{0x267,4,0x1C2,0x1C2},
|
|
|
|
{0x334,6,0x335,0x335}, /* 1004 series RLL */
|
|
{0x30E,4,0x30F,0x3DC},
|
|
{0x30E,2,0x30F,0x30F},
|
|
{0x267,4,0x268,0x268},
|
|
|
|
{0x3D5,5,0x3D6,0x3D6}, /* 1002 series RLL */
|
|
{0x3DB,7,0x3DC,0x3DC},
|
|
{0x264,4,0x265,0x265},
|
|
{0x267,4,0x268,0x268}};
|
|
|
|
u_char cmdblk[6],buf[0x200];
|
|
u_char n = 0,rll,jumper_state,use_jumper_geo;
|
|
u_char wd_1002 = (xd_sigs[xd_type].string[7] == '6');
|
|
|
|
jumper_state = ~(inb(0x322));
|
|
if (jumper_state & 0x40)
|
|
xd_irq = 9;
|
|
rll = (jumper_state & 0x30) ? (0x04 << wd_1002) : 0;
|
|
xd_build(cmdblk,CMD_READ,drive,0,0,0,1,0);
|
|
if (!xd_command(cmdblk,PIO_MODE,buf,NULL,NULL,XD_TIMEOUT * 2)) {
|
|
xd_info[drive].heads = buf[0x1AF]; /* heads */
|
|
xd_info[drive].cylinders = ((u_short *) (buf + 1))[0xD6]; /* cylinders */
|
|
xd_info[drive].sectors = 17; /* sectors */
|
|
if (xd_geo[3*drive])
|
|
xd_manual_geo_set(drive);
|
|
#if 0
|
|
xd_info[drive].rwrite = ((u_short *) (buf))[0xD8]; /* reduced write */
|
|
xd_info[drive].wprecomp = ((u_short *) (buf))[0xDA]; /* write precomp */
|
|
xd_info[drive].ecc = buf[0x1B4]; /* ecc length */
|
|
#endif /* 0 */
|
|
xd_info[drive].control = buf[0x1B5]; /* control byte */
|
|
use_jumper_geo = !(xd_info[drive].heads) || !(xd_info[drive].cylinders);
|
|
if (xd_geo[3*drive]) {
|
|
xd_manual_geo_set(drive);
|
|
xd_info[drive].control = rll ? 7 : 5;
|
|
}
|
|
else if (use_jumper_geo) {
|
|
n = (((jumper_state & 0x0F) >> (drive << 1)) & 0x03) | rll;
|
|
xd_info[drive].cylinders = geometry_table[n][0];
|
|
xd_info[drive].heads = (u_char)(geometry_table[n][1]);
|
|
xd_info[drive].control = rll ? 7 : 5;
|
|
#if 0
|
|
xd_info[drive].rwrite = geometry_table[n][2];
|
|
xd_info[drive].wprecomp = geometry_table[n][3];
|
|
xd_info[drive].ecc = 0x0B;
|
|
#endif /* 0 */
|
|
}
|
|
if (!wd_1002) {
|
|
if (use_jumper_geo)
|
|
xd_setparam(CMD_WDSETPARAM,drive,xd_info[drive].heads,xd_info[drive].cylinders,
|
|
geometry_table[n][2],geometry_table[n][3],0x0B);
|
|
else
|
|
xd_setparam(CMD_WDSETPARAM,drive,xd_info[drive].heads,xd_info[drive].cylinders,
|
|
((u_short *) (buf))[0xD8],((u_short *) (buf))[0xDA],buf[0x1B4]);
|
|
}
|
|
/* 1002 based RLL controller requests converted addressing, but reports physical
|
|
(physical 26 sec., logical 17 sec.)
|
|
1004 based ???? */
|
|
if (rll & wd_1002) {
|
|
if ((xd_info[drive].cylinders *= 26,
|
|
xd_info[drive].cylinders /= 17) > 1023)
|
|
xd_info[drive].cylinders = 1023; /* 1024 ? */
|
|
#if 0
|
|
xd_info[drive].rwrite *= 26;
|
|
xd_info[drive].rwrite /= 17;
|
|
xd_info[drive].wprecomp *= 26
|
|
xd_info[drive].wprecomp /= 17;
|
|
#endif /* 0 */
|
|
}
|
|
}
|
|
else
|
|
printk("xd_wd_init_drive: error reading geometry for xd%c\n",'a'+drive);
|
|
|
|
}
|
|
|
|
static void __init xd_seagate_init_controller (unsigned int address)
|
|
{
|
|
switch (address) {
|
|
case 0x00000:
|
|
case 0xC8000: break; /*initial: 0x320 */
|
|
case 0xD0000: xd_iobase = 0x324; break;
|
|
case 0xD8000: xd_iobase = 0x328; break;
|
|
case 0xE0000: xd_iobase = 0x32C; break;
|
|
default: printk("xd_seagate_init_controller: unsupported BIOS address %06x\n",address);
|
|
break;
|
|
}
|
|
xd_maxsectors = 0x40;
|
|
|
|
outb(0,XD_RESET); /* reset the controller */
|
|
}
|
|
|
|
static void __init xd_seagate_init_drive (u_char drive)
|
|
{
|
|
u_char cmdblk[6],buf[0x200];
|
|
|
|
xd_build(cmdblk,CMD_ST11GETGEOM,drive,0,0,0,1,0);
|
|
if (!xd_command(cmdblk,PIO_MODE,buf,NULL,NULL,XD_TIMEOUT * 2)) {
|
|
xd_info[drive].heads = buf[0x04]; /* heads */
|
|
xd_info[drive].cylinders = (buf[0x02] << 8) | buf[0x03]; /* cylinders */
|
|
xd_info[drive].sectors = buf[0x05]; /* sectors */
|
|
xd_info[drive].control = 0; /* control byte */
|
|
}
|
|
else
|
|
printk("xd_seagate_init_drive: error reading geometry from xd%c\n", 'a'+drive);
|
|
}
|
|
|
|
/* Omti support courtesy Dirk Melchers */
|
|
static void __init xd_omti_init_controller (unsigned int address)
|
|
{
|
|
switch (address) {
|
|
case 0x00000:
|
|
case 0xC8000: break; /*initial: 0x320 */
|
|
case 0xD0000: xd_iobase = 0x324; break;
|
|
case 0xD8000: xd_iobase = 0x328; break;
|
|
case 0xE0000: xd_iobase = 0x32C; break;
|
|
default: printk("xd_omti_init_controller: unsupported BIOS address %06x\n",address);
|
|
break;
|
|
}
|
|
|
|
xd_maxsectors = 0x40;
|
|
|
|
outb(0,XD_RESET); /* reset the controller */
|
|
}
|
|
|
|
static void __init xd_omti_init_drive (u_char drive)
|
|
{
|
|
/* gets infos from drive */
|
|
xd_override_init_drive(drive);
|
|
|
|
/* set other parameters, Hardcoded, not that nice :-) */
|
|
xd_info[drive].control = 2;
|
|
}
|
|
|
|
/* Xebec support (AK) */
|
|
static void __init xd_xebec_init_controller (unsigned int address)
|
|
{
|
|
/* iobase may be set manually in range 0x300 - 0x33C
|
|
irq may be set manually to 2(9),3,4,5,6,7
|
|
dma may be set manually to 1,2,3
|
|
(How to detect them ???)
|
|
BIOS address may be set manually in range 0x0 - 0xF8000
|
|
If you need non-standard settings use the xd=... command */
|
|
|
|
switch (address) {
|
|
case 0x00000:
|
|
case 0xC8000: /* initially: xd_iobase==0x320 */
|
|
case 0xD0000:
|
|
case 0xD2000:
|
|
case 0xD4000:
|
|
case 0xD6000:
|
|
case 0xD8000:
|
|
case 0xDA000:
|
|
case 0xDC000:
|
|
case 0xDE000:
|
|
case 0xE0000: break;
|
|
default: printk("xd_xebec_init_controller: unsupported BIOS address %06x\n",address);
|
|
break;
|
|
}
|
|
|
|
xd_maxsectors = 0x01;
|
|
outb(0,XD_RESET); /* reset the controller */
|
|
|
|
set_current_state(TASK_UNINTERRUPTIBLE);
|
|
schedule_timeout(XD_INIT_DISK_DELAY);
|
|
}
|
|
|
|
static void __init xd_xebec_init_drive (u_char drive)
|
|
{
|
|
/* values from controller's BIOS - BIOS chip may be removed */
|
|
static u_short geometry_table[][5] = {
|
|
{0x132,4,0x080,0x080,0x7},
|
|
{0x132,4,0x080,0x080,0x17},
|
|
{0x264,2,0x100,0x100,0x7},
|
|
{0x264,2,0x100,0x100,0x17},
|
|
{0x132,8,0x080,0x080,0x7},
|
|
{0x132,8,0x080,0x080,0x17},
|
|
{0x264,4,0x100,0x100,0x6},
|
|
{0x264,4,0x100,0x100,0x17},
|
|
{0x2BC,5,0x2BC,0x12C,0x6},
|
|
{0x3A5,4,0x3A5,0x3A5,0x7},
|
|
{0x26C,6,0x26C,0x26C,0x7},
|
|
{0x200,8,0x200,0x100,0x17},
|
|
{0x400,5,0x400,0x400,0x7},
|
|
{0x400,6,0x400,0x400,0x7},
|
|
{0x264,8,0x264,0x200,0x17},
|
|
{0x33E,7,0x33E,0x200,0x7}};
|
|
u_char n;
|
|
|
|
n = inb(XD_JUMPER) & 0x0F; /* BIOS's drive number: same geometry
|
|
is assumed for BOTH drives */
|
|
if (xd_geo[3*drive])
|
|
xd_manual_geo_set(drive);
|
|
else {
|
|
xd_info[drive].heads = (u_char)(geometry_table[n][1]); /* heads */
|
|
xd_info[drive].cylinders = geometry_table[n][0]; /* cylinders */
|
|
xd_info[drive].sectors = 17; /* sectors */
|
|
#if 0
|
|
xd_info[drive].rwrite = geometry_table[n][2]; /* reduced write */
|
|
xd_info[drive].precomp = geometry_table[n][3] /* write precomp */
|
|
xd_info[drive].ecc = 0x0B; /* ecc length */
|
|
#endif /* 0 */
|
|
}
|
|
xd_info[drive].control = geometry_table[n][4]; /* control byte */
|
|
xd_setparam(CMD_XBSETPARAM,drive,xd_info[drive].heads,xd_info[drive].cylinders,geometry_table[n][2],geometry_table[n][3],0x0B);
|
|
xd_recalibrate(drive);
|
|
}
|
|
|
|
/* xd_override_init_drive: this finds disk geometry in a "binary search" style, narrowing in on the "correct" number of heads
|
|
etc. by trying values until it gets the highest successful value. Idea courtesy Salvador Abreu (spa@fct.unl.pt). */
|
|
static void __init xd_override_init_drive (u_char drive)
|
|
{
|
|
u_short min[] = { 0,0,0 },max[] = { 16,1024,64 },test[] = { 0,0,0 };
|
|
u_char cmdblk[6],i;
|
|
|
|
if (xd_geo[3*drive])
|
|
xd_manual_geo_set(drive);
|
|
else {
|
|
for (i = 0; i < 3; i++) {
|
|
while (min[i] != max[i] - 1) {
|
|
test[i] = (min[i] + max[i]) / 2;
|
|
xd_build(cmdblk,CMD_SEEK,drive,(u_char) test[0],(u_short) test[1],(u_char) test[2],0,0);
|
|
if (!xd_command(cmdblk,PIO_MODE,NULL,NULL,NULL,XD_TIMEOUT * 2))
|
|
min[i] = test[i];
|
|
else
|
|
max[i] = test[i];
|
|
}
|
|
test[i] = min[i];
|
|
}
|
|
xd_info[drive].heads = (u_char) min[0] + 1;
|
|
xd_info[drive].cylinders = (u_short) min[1] + 1;
|
|
xd_info[drive].sectors = (u_char) min[2] + 1;
|
|
}
|
|
xd_info[drive].control = 0;
|
|
}
|
|
|
|
/* xd_setup: initialise controller from command line parameters */
|
|
static void __init do_xd_setup (int *integers)
|
|
{
|
|
switch (integers[0]) {
|
|
case 4: if (integers[4] < 0)
|
|
nodma = 1;
|
|
else if (integers[4] < 8)
|
|
xd_dma = integers[4];
|
|
case 3: if ((integers[3] > 0) && (integers[3] <= 0x3FC))
|
|
xd_iobase = integers[3];
|
|
case 2: if ((integers[2] > 0) && (integers[2] < 16))
|
|
xd_irq = integers[2];
|
|
case 1: xd_override = 1;
|
|
if ((integers[1] >= 0) && (integers[1] < (sizeof(xd_sigs) / sizeof(xd_sigs[0]))))
|
|
xd_type = integers[1];
|
|
case 0: break;
|
|
default:printk("xd: too many parameters for xd\n");
|
|
}
|
|
xd_maxsectors = 0x01;
|
|
}
|
|
|
|
/* xd_setparam: set the drive characteristics */
|
|
static void __init xd_setparam (u_char command,u_char drive,u_char heads,u_short cylinders,u_short rwrite,u_short wprecomp,u_char ecc)
|
|
{
|
|
u_char cmdblk[14];
|
|
|
|
xd_build(cmdblk,command,drive,0,0,0,0,0);
|
|
cmdblk[6] = (u_char) (cylinders >> 8) & 0x03;
|
|
cmdblk[7] = (u_char) (cylinders & 0xFF);
|
|
cmdblk[8] = heads & 0x1F;
|
|
cmdblk[9] = (u_char) (rwrite >> 8) & 0x03;
|
|
cmdblk[10] = (u_char) (rwrite & 0xFF);
|
|
cmdblk[11] = (u_char) (wprecomp >> 8) & 0x03;
|
|
cmdblk[12] = (u_char) (wprecomp & 0xFF);
|
|
cmdblk[13] = ecc;
|
|
|
|
/* Some controllers require geometry info as data, not command */
|
|
|
|
if (xd_command(cmdblk,PIO_MODE,NULL,&cmdblk[6],NULL,XD_TIMEOUT * 2))
|
|
printk("xd: error setting characteristics for xd%c\n", 'a'+drive);
|
|
}
|
|
|
|
|
|
#ifdef MODULE
|
|
|
|
module_param_array(xd, int, NULL, 0);
|
|
module_param_array(xd_geo, int, NULL, 0);
|
|
module_param(nodma, bool, 0);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
void cleanup_module(void)
|
|
{
|
|
int i;
|
|
unregister_blkdev(XT_DISK_MAJOR, "xd");
|
|
for (i = 0; i < xd_drives; i++) {
|
|
del_gendisk(xd_gendisk[i]);
|
|
put_disk(xd_gendisk[i]);
|
|
}
|
|
blk_cleanup_queue(xd_queue);
|
|
release_region(xd_iobase,4);
|
|
if (xd_drives) {
|
|
free_irq(xd_irq, NULL);
|
|
free_dma(xd_dma);
|
|
if (xd_dma_buffer)
|
|
xd_dma_mem_free((unsigned long)xd_dma_buffer, xd_maxsectors * 0x200);
|
|
}
|
|
}
|
|
#else
|
|
|
|
static int __init xd_setup (char *str)
|
|
{
|
|
int ints[5];
|
|
get_options (str, ARRAY_SIZE (ints), ints);
|
|
do_xd_setup (ints);
|
|
return 1;
|
|
}
|
|
|
|
/* xd_manual_geo_init: initialise drive geometry from command line parameters
|
|
(used only for WD drives) */
|
|
static int __init xd_manual_geo_init (char *str)
|
|
{
|
|
int i, integers[1 + 3*XD_MAXDRIVES];
|
|
|
|
get_options (str, ARRAY_SIZE (integers), integers);
|
|
if (integers[0]%3 != 0) {
|
|
printk("xd: incorrect number of parameters for xd_geo\n");
|
|
return 1;
|
|
}
|
|
for (i = 0; (i < integers[0]) && (i < 3*XD_MAXDRIVES); i++)
|
|
xd_geo[i] = integers[i+1];
|
|
return 1;
|
|
}
|
|
|
|
__setup ("xd=", xd_setup);
|
|
__setup ("xd_geo=", xd_manual_geo_init);
|
|
|
|
#endif /* MODULE */
|
|
|
|
module_init(xd_init);
|
|
MODULE_ALIAS_BLOCKDEV_MAJOR(XT_DISK_MAJOR);
|