Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-27 14:41:39 +00:00
Code Issues Packages Projects Releases Wiki Activity
14ebf24175
linux/drivers/clk/ti/clkctrl.c
Linus Torvalds ddebe839c6 This merge window we have one small clk provider API in the core framework and 
then a bunch of driver updates and a handful of new drivers. In terms of
 diffstat the Qualcomm and Amlogic drivers are high up there because of all the
 clk data introcued by new drivers. The Nvidia Tegra driver had a lot of work
 done this cycle too to support suspend/resume and memory controllers. And the
 OMAP clk driver got proper clk and reset handling in place.
 
 Rounding out the patches are various updates to remove unused data, mark things
 static, correct incorrect data in drivers, etc. All the little things that
 improve drivers and maintain code health. I will point out that there's a patch
 in here for the GPIO clk driver, that almost nobody uses, which changes
 behavior and causes clk_set_rate() to try to change the GPIO gate clk's parent.
 Other than that things are fairly well SoC specific here.
 
 Core:
  - Add a clk provider API to get current parent index
  - Plug a memory leak in clk_unregister() path
 
 New Drivers:
  - CGU in Ingenix X1000
  - Bitmain BM1880 clks
  - Qualcomm MSM8998 GPU clk controllers
  - Qualcomm SC7180 GCC and RPMH clk controllers
  - Qualcomm QCS404 Q6SSTOP clk controllers
  - Add support for the Renesas R-Car M3-W+ (r8a77961) SoC
  - Add support for the Renesas RZ/G2N (r8a774b1) SoC
  - Add Tegra20/30 External Memory Clock (EMC) support
 
 Updates:
  - Make gpio gate clks propagate rate setting up to parent
  - Prepare Armada 3700 for suspend to RAM by moving PCIe suspend/resume priority
  - Drop unused variables, enums, etc. in various clk drivers
  - Convert various drivers to use devm_platform_ioremap_resource()
  - Use struct_size() some more in various clk drivers
  - Improve Rockchip px30 clk tree
  - Add suspend/resume support to Tegra210 clk driver
  - Reimplement SOR clks on earlier Tegra SoCs, helping HDMI and DP
  - Allwinner DT exports and H6 clk tree fixes
  - Proper clk and reset handling for OMAP SoCs
  - Revamped TI divider clk to clamp max divider
  - Make 1443X/1416X PLL clock structure common for reusing among i.MX8 SoCs
  - Drop IMX7ULP_CLK_MIPI_PLL clock, it shouldn't be used
  - Add VIDEO2_PLL clock for imx8mq
  - Add missing gate clock for pll1/2 fixed dividers on i.MX8 SoCs
  - Add sm1 support in the Amlogic audio clock controller
  - Switch some clocks on R-Car Gen2/3 to .determine_rate()
  - Remove Renesas R-Car Gen2 legacy DT clock support
  - Improve arithmetic divisions on Renesas R-Car Gen2 and Gen3
  - Improve Renesas R-Car Gen3 SD clock handling
  - Add rate table for Samsung exynos542x GPU and VPLL clks
  - Fix potential CPU performance degradation after system suspend/resume cycle
    on exynos542x SoCs
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl3e6rMRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSUtWQ//a3epm5t5lQHZjhDJFLYXqavzkGTLcDnF
 2+HWNwxLGatvmFqvLAxpB9QlFUntLOdQwjsI47UGKLVNwtXzqafl2yQGrMNYsdR+
 6ka0zkytPRuRr+C6cUYUxaoLviDMKi/PXrluOawXbdQ1ZL/5TgURkmEgGglp4Mti
 QHp2HO7uSk9pYA8T3TUK+hd9cqLXqW4xMn8MohuWfF3JxoquixOg+N7pE/OeGUyW
 NueWWvwKJ86Gtx+OxY8bW3afAzstUynxCUDLC/t7a5y52jxGCwuhHTC/pNcDgYFC
 z1H0rnoKG3pE74mm11Mh//zneoqvyzrWYGU6TNcaTxVgODogklGYY6doRLelZ0qc
 4HFSqrtkUtx+lI++9Q73LcX5xdogTGxOnNv/hr3rCCR/w9tFmys14JKnfUDQCbhj
 qRTFlr9IkIkhfCiRw5+zNo0oRf/hE7IOgYdU2ju31j4w/V5r8TUKPTq2VBh2sJaG
 MJKQclaIBJOV5sxgJrI/XoocTes7H3WR0w5rSB1askbhzQnKkrhctPOEB6Rkvtyv
 27z5VZb1AmPdYaa6TtHVZ5SQOB3Y9JaEl6t89X61kxk7mgylZlwhASUuBVRZpz53
 WIjNfquYGpWnA+vc+SWnlMnaymqtlatGig8k8atdDn+eMiXphktL+gObIF1OFnm1
 AhGhUxXf/Aw=
 =qJNg
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This merge window we have one small clk provider API in the core
  framework and then a bunch of driver updates and a handful of new
  drivers. In terms of diffstat the Qualcomm and Amlogic drivers are
  high up there because of all the clk data introcued by new drivers.
  The Nvidia Tegra driver had a lot of work done this cycle too to
  support suspend/resume and memory controllers. And the OMAP clk driver
  got proper clk and reset handling in place.

  Rounding out the patches are various updates to remove unused data,
  mark things static, correct incorrect data in drivers, etc. All the
  little things that improve drivers and maintain code health. I will
  point out that there's a patch in here for the GPIO clk driver, that
  almost nobody uses, which changes behavior and causes clk_set_rate()
  to try to change the GPIO gate clk's parent. Other than that things
  are fairly well SoC specific here.

  Core:
   - Add a clk provider API to get current parent index
   - Plug a memory leak in clk_unregister() path

  New Drivers:
   - CGU in Ingenix X1000
   - Bitmain BM1880 clks
   - Qualcomm MSM8998 GPU clk controllers
   - Qualcomm SC7180 GCC and RPMH clk controllers
   - Qualcomm QCS404 Q6SSTOP clk controllers
   - Add support for the Renesas R-Car M3-W+ (r8a77961) SoC
   - Add support for the Renesas RZ/G2N (r8a774b1) SoC
   - Add Tegra20/30 External Memory Clock (EMC) support

  Updates:
   - Make gpio gate clks propagate rate setting up to parent
   - Prepare Armada 3700 for suspend to RAM by moving PCIe
     suspend/resume priority
   - Drop unused variables, enums, etc. in various clk drivers
   - Convert various drivers to use devm_platform_ioremap_resource()
   - Use struct_size() some more in various clk drivers
   - Improve Rockchip px30 clk tree
   - Add suspend/resume support to Tegra210 clk driver
   - Reimplement SOR clks on earlier Tegra SoCs, helping HDMI and DP
   - Allwinner DT exports and H6 clk tree fixes
   - Proper clk and reset handling for OMAP SoCs
   - Revamped TI divider clk to clamp max divider
   - Make 1443X/1416X PLL clock structure common for reusing among i.MX8
     SoCs
   - Drop IMX7ULP_CLK_MIPI_PLL clock, it shouldn't be used
   - Add VIDEO2_PLL clock for imx8mq
   - Add missing gate clock for pll1/2 fixed dividers on i.MX8 SoCs
   - Add sm1 support in the Amlogic audio clock controller
   - Switch some clocks on R-Car Gen2/3 to .determine_rate()
   - Remove Renesas R-Car Gen2 legacy DT clock support
   - Improve arithmetic divisions on Renesas R-Car Gen2 and Gen3
   - Improve Renesas R-Car Gen3 SD clock handling
   - Add rate table for Samsung exynos542x GPU and VPLL clks
   - Fix potential CPU performance degradation after system
     suspend/resume cycle on exynos542x SoCs"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (160 commits)
  clk: aspeed: Add RMII RCLK gates for both AST2500 MACs
  MAINTAINERS: Add entry for BM1880 SoC clock driver
  clk: Add common clock driver for BM1880 SoC
  dt-bindings: clock: Add devicetree binding for BM1880 SoC
  clk: Add clk_hw_unregister_composite helper function definition
  clk: Zero init clk_init_data in helpers
  clk: ingenic: Allow drivers to be built with COMPILE_TEST
  MAINTAINERS: Update section for Ux500 clock drivers
  clk: mark clk_disable_unused() as __init
  clk: Fix memory leak in clk_unregister()
  clk: Ingenic: Add CGU driver for X1000.
  dt-bindings: clock: Add X1000 bindings.
  clk: tegra: Use match_string() helper to simplify the code
  clk: pxa: fix one of the pxa RTC clocks
  clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle()
  clk: armada-xp: remove unused code
  clk: tegra: Fix build error without CONFIG_PM_SLEEP
  clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP
  clk: tegra: Optimize PLLX restore on Tegra20/30
  clk: tegra: Add suspend and resume support on Tegra210
  ...
2019-12-01 16:06:02 -08:00

684 lines
16 KiB
C
Raw Blame History

/*
* OMAP clkctrl clock support
*
* Copyright (C) 2017 Texas Instruments, Inc.
*
* Tero Kristo <t-kristo@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/clk-provider.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/clk/ti.h>
#include <linux/delay.h>
#include <linux/timekeeping.h>
#include "clock.h"
#define NO_IDLEST 0
#define OMAP4_MODULEMODE_MASK 0x3
#define MODULEMODE_HWCTRL 0x1
#define MODULEMODE_SWCTRL 0x2
#define OMAP4_IDLEST_MASK (0x3 << 16)
#define OMAP4_IDLEST_SHIFT 16
#define OMAP4_STBYST_MASK BIT(18)
#define OMAP4_STBYST_SHIFT 18
#define CLKCTRL_IDLEST_FUNCTIONAL 0x0
#define CLKCTRL_IDLEST_INTERFACE_IDLE 0x2
#define CLKCTRL_IDLEST_DISABLED 0x3
/* These timeouts are in us */
#define OMAP4_MAX_MODULE_READY_TIME 2000
#define OMAP4_MAX_MODULE_DISABLE_TIME 5000
static bool _early_timeout = true;
struct omap_clkctrl_provider {
void __iomem *base;
struct list_head clocks;
char *clkdm_name;
};
struct omap_clkctrl_clk {
struct clk_hw *clk;
u16 reg_offset;
int bit_offset;
struct list_head node;
};
union omap4_timeout {
u32 cycles;
ktime_t start;
};
static const struct omap_clkctrl_data default_clkctrl_data[] __initconst = {
{ 0 },
};
static u32 _omap4_idlest(u32 val)
{
val &= OMAP4_IDLEST_MASK;
val >>= OMAP4_IDLEST_SHIFT;
return val;
}
static bool _omap4_is_idle(u32 val)
{
val = _omap4_idlest(val);
return val == CLKCTRL_IDLEST_DISABLED;
}
static bool _omap4_is_ready(u32 val)
{
val = _omap4_idlest(val);
return val == CLKCTRL_IDLEST_FUNCTIONAL ||
val == CLKCTRL_IDLEST_INTERFACE_IDLE;
}
static bool _omap4_is_timeout(union omap4_timeout *time, u32 timeout)
{
/*
* There are two special cases where ktime_to_ns() can't be
* used to track the timeouts. First one is during early boot
* when the timers haven't been initialized yet. The second
* one is during suspend-resume cycle while timekeeping is
* being suspended / resumed. Clocksource for the system
* can be from a timer that requires pm_runtime access, which
* will eventually bring us here with timekeeping_suspended,
* during both suspend entry and resume paths. This happens
* at least on am43xx platform. Account for flakeyness
* with udelay() by multiplying the timeout value by 2.
*/
if (unlikely(_early_timeout || timekeeping_suspended)) {
if (time->cycles++ < timeout) {
udelay(1 * 2);
return false;
}
} else {
if (!ktime_to_ns(time->start)) {
time->start = ktime_get();
return false;
}
if (ktime_us_delta(ktime_get(), time->start) < timeout) {
cpu_relax();
return false;
}
}
return true;
}
static int __init _omap4_disable_early_timeout(void)
{
_early_timeout = false;
return 0;
}
arch_initcall(_omap4_disable_early_timeout);
static int _omap4_clkctrl_clk_enable(struct clk_hw *hw)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
u32 val;
int ret;
union omap4_timeout timeout = { 0 };
if (clk->clkdm) {
ret = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk);
if (ret) {
WARN(1,
"%s: could not enable %s's clockdomain %s: %d\n",
__func__, clk_hw_get_name(hw),
clk->clkdm_name, ret);
return ret;
}
}
if (!clk->enable_bit)
return 0;
val = ti_clk_ll_ops->clk_readl(&clk->enable_reg);
val &= ~OMAP4_MODULEMODE_MASK;
val |= clk->enable_bit;
ti_clk_ll_ops->clk_writel(val, &clk->enable_reg);
if (test_bit(NO_IDLEST, &clk->flags))
return 0;
/* Wait until module is enabled */
while (!_omap4_is_ready(ti_clk_ll_ops->clk_readl(&clk->enable_reg))) {
if (_omap4_is_timeout(&timeout, OMAP4_MAX_MODULE_READY_TIME)) {
pr_err("%s: failed to enable\n", clk_hw_get_name(hw));
return -EBUSY;
}
}
return 0;
}
static void _omap4_clkctrl_clk_disable(struct clk_hw *hw)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
u32 val;
union omap4_timeout timeout = { 0 };
if (!clk->enable_bit)
goto exit;
val = ti_clk_ll_ops->clk_readl(&clk->enable_reg);
val &= ~OMAP4_MODULEMODE_MASK;
ti_clk_ll_ops->clk_writel(val, &clk->enable_reg);
if (test_bit(NO_IDLEST, &clk->flags))
goto exit;
/* Wait until module is disabled */
while (!_omap4_is_idle(ti_clk_ll_ops->clk_readl(&clk->enable_reg))) {
if (_omap4_is_timeout(&timeout,
OMAP4_MAX_MODULE_DISABLE_TIME)) {
pr_err("%s: failed to disable\n", clk_hw_get_name(hw));
break;
}
}
exit:
if (clk->clkdm)
ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk);
}
static int _omap4_clkctrl_clk_is_enabled(struct clk_hw *hw)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
u32 val;
val = ti_clk_ll_ops->clk_readl(&clk->enable_reg);
if (val & clk->enable_bit)
return 1;
return 0;
}
static const struct clk_ops omap4_clkctrl_clk_ops = {
.enable = _omap4_clkctrl_clk_enable,
.disable = _omap4_clkctrl_clk_disable,
.is_enabled = _omap4_clkctrl_clk_is_enabled,
.init = omap2_init_clk_clkdm,
};
static struct clk_hw *_ti_omap4_clkctrl_xlate(struct of_phandle_args *clkspec,
void *data)
{
struct omap_clkctrl_provider *provider = data;
struct omap_clkctrl_clk *entry;
bool found = false;
if (clkspec->args_count != 2)
return ERR_PTR(-EINVAL);
pr_debug("%s: looking for %x:%x\n", __func__,
clkspec->args[0], clkspec->args[1]);
list_for_each_entry(entry, &provider->clocks, node) {
if (entry->reg_offset == clkspec->args[0] &&
entry->bit_offset == clkspec->args[1]) {
found = true;
break;
}
}
if (!found)
return ERR_PTR(-EINVAL);
return entry->clk;
}
static int __init
_ti_clkctrl_clk_register(struct omap_clkctrl_provider *provider,
struct device_node *node, struct clk_hw *clk_hw,
u16 offset, u8 bit, const char * const *parents,
int num_parents, const struct clk_ops *ops)
{
struct clk_init_data init = { NULL };
struct clk *clk;
struct omap_clkctrl_clk *clkctrl_clk;
int ret = 0;
if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
init.name = kasprintf(GFP_KERNEL, "%pOFn:%pOFn:%04x:%d",
node->parent, node, offset,
bit);
else
init.name = kasprintf(GFP_KERNEL, "%pOFn:%04x:%d", node,
offset, bit);
clkctrl_clk = kzalloc(sizeof(*clkctrl_clk), GFP_KERNEL);
if (!init.name || !clkctrl_clk) {
ret = -ENOMEM;
goto cleanup;
}
clk_hw->init = &init;
init.parent_names = parents;
init.num_parents = num_parents;
init.ops = ops;
init.flags = 0;
clk = ti_clk_register(NULL, clk_hw, init.name);
if (IS_ERR_OR_NULL(clk)) {
ret = -EINVAL;
goto cleanup;
}
clkctrl_clk->reg_offset = offset;
clkctrl_clk->bit_offset = bit;
clkctrl_clk->clk = clk_hw;
list_add(&clkctrl_clk->node, &provider->clocks);
return 0;
cleanup:
kfree(init.name);
kfree(clkctrl_clk);
return ret;
}
static void __init
_ti_clkctrl_setup_gate(struct omap_clkctrl_provider *provider,
struct device_node *node, u16 offset,
const struct omap_clkctrl_bit_data *data,
void __iomem *reg)
{
struct clk_hw_omap *clk_hw;
clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
if (!clk_hw)
return;
clk_hw->enable_bit = data->bit;
clk_hw->enable_reg.ptr = reg;
if (_ti_clkctrl_clk_register(provider, node, &clk_hw->hw, offset,
data->bit, data->parents, 1,
&omap_gate_clk_ops))
kfree(clk_hw);
}
static void __init
_ti_clkctrl_setup_mux(struct omap_clkctrl_provider *provider,
struct device_node *node, u16 offset,
const struct omap_clkctrl_bit_data *data,
void __iomem *reg)
{
struct clk_omap_mux *mux;
int num_parents = 0;
const char * const *pname;
mux = kzalloc(sizeof(*mux), GFP_KERNEL);
if (!mux)
return;
pname = data->parents;
while (*pname) {
num_parents++;
pname++;
}
mux->mask = num_parents;
if (!(mux->flags & CLK_MUX_INDEX_ONE))
mux->mask--;
mux->mask = (1 << fls(mux->mask)) - 1;
mux->shift = data->bit;
mux->reg.ptr = reg;
if (_ti_clkctrl_clk_register(provider, node, &mux->hw, offset,
data->bit, data->parents, num_parents,
&ti_clk_mux_ops))
kfree(mux);
}
static void __init
_ti_clkctrl_setup_div(struct omap_clkctrl_provider *provider,
struct device_node *node, u16 offset,
const struct omap_clkctrl_bit_data *data,
void __iomem *reg)
{
struct clk_omap_divider *div;
const struct omap_clkctrl_div_data *div_data = data->data;
u8 div_flags = 0;
div = kzalloc(sizeof(*div), GFP_KERNEL);
if (!div)
return;
div->reg.ptr = reg;
div->shift = data->bit;
div->flags = div_data->flags;
if (div->flags & CLK_DIVIDER_POWER_OF_TWO)
div_flags |= CLKF_INDEX_POWER_OF_TWO;
if (ti_clk_parse_divider_data((int *)div_data->dividers, 0,
div_data->max_div, div_flags,
div)) {
pr_err("%s: Data parsing for %pOF:%04x:%d failed\n", __func__,
node, offset, data->bit);
kfree(div);
return;
}
if (_ti_clkctrl_clk_register(provider, node, &div->hw, offset,
data->bit, data->parents, 1,
&ti_clk_divider_ops))
kfree(div);
}
static void __init
_ti_clkctrl_setup_subclks(struct omap_clkctrl_provider *provider,
struct device_node *node,
const struct omap_clkctrl_reg_data *data,
void __iomem *reg)
{
const struct omap_clkctrl_bit_data *bits = data->bit_data;
if (!bits)
return;
while (bits->bit) {
switch (bits->type) {
case TI_CLK_GATE:
_ti_clkctrl_setup_gate(provider, node, data->offset,
bits, reg);
break;
case TI_CLK_DIVIDER:
_ti_clkctrl_setup_div(provider, node, data->offset,
bits, reg);
break;
case TI_CLK_MUX:
_ti_clkctrl_setup_mux(provider, node, data->offset,
bits, reg);
break;
default:
pr_err("%s: bad subclk type: %d\n", __func__,
bits->type);
return;
}
bits++;
}
}
static void __init _clkctrl_add_provider(void *data,
struct device_node *np)
{
of_clk_add_hw_provider(np, _ti_omap4_clkctrl_xlate, data);
}
static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
{
struct omap_clkctrl_provider *provider;
const struct omap_clkctrl_data *data = default_clkctrl_data;
const struct omap_clkctrl_reg_data *reg_data;
struct clk_init_data init = { NULL };
struct clk_hw_omap *hw;
struct clk *clk;
struct omap_clkctrl_clk *clkctrl_clk;
const __be32 *addrp;
u32 addr;
int ret;
char *c;
u16 soc_mask = 0;
if (!(ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) &&
of_node_name_eq(node, "clk"))
ti_clk_features.flags |= TI_CLK_CLKCTRL_COMPAT;
addrp = of_get_address(node, 0, NULL, NULL);
addr = (u32)of_translate_address(node, addrp);
#ifdef CONFIG_ARCH_OMAP4
if (of_machine_is_compatible("ti,omap4"))
data = omap4_clkctrl_data;
#endif
#ifdef CONFIG_SOC_OMAP5
if (of_machine_is_compatible("ti,omap5"))
data = omap5_clkctrl_data;
#endif
#ifdef CONFIG_SOC_DRA7XX
if (of_machine_is_compatible("ti,dra7")) {
if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
data = dra7_clkctrl_compat_data;
else
data = dra7_clkctrl_data;
}
if (of_machine_is_compatible("ti,dra72"))
soc_mask = CLKF_SOC_DRA72;
if (of_machine_is_compatible("ti,dra74"))
soc_mask = CLKF_SOC_DRA74;
if (of_machine_is_compatible("ti,dra76"))
soc_mask = CLKF_SOC_DRA76;
#endif
#ifdef CONFIG_SOC_AM33XX
if (of_machine_is_compatible("ti,am33xx")) {
if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
data = am3_clkctrl_compat_data;
else
data = am3_clkctrl_data;
}
#endif
#ifdef CONFIG_SOC_AM43XX
if (of_machine_is_compatible("ti,am4372")) {
if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
data = am4_clkctrl_compat_data;
else
data = am4_clkctrl_data;
}
if (of_machine_is_compatible("ti,am438x")) {
if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
data = am438x_clkctrl_compat_data;
else
data = am438x_clkctrl_data;
}
#endif
#ifdef CONFIG_SOC_TI81XX
if (of_machine_is_compatible("ti,dm814"))
data = dm814_clkctrl_data;
if (of_machine_is_compatible("ti,dm816"))
data = dm816_clkctrl_data;
#endif
if (ti_clk_get_features()->flags & TI_CLK_DEVICE_TYPE_GP)
soc_mask |= CLKF_SOC_NONSEC;
while (data->addr) {
if (addr == data->addr)
break;
data++;
}
if (!data->addr) {
pr_err("%pOF not found from clkctrl data.\n", node);
return;
}
provider = kzalloc(sizeof(*provider), GFP_KERNEL);
if (!provider)
return;
provider->base = of_iomap(node, 0);
if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) {
provider->clkdm_name = kasprintf(GFP_KERNEL, "%pOFnxxx", node->parent);
if (!provider->clkdm_name) {
kfree(provider);
return;
}
/*
* Create default clkdm name, replace _cm from end of parent
* node name with _clkdm
*/
provider->clkdm_name[strlen(provider->clkdm_name) - 2] = 0;
} else {
provider->clkdm_name = kasprintf(GFP_KERNEL, "%pOFn", node);
if (!provider->clkdm_name) {
kfree(provider);
return;
}
/*
* Create default clkdm name, replace _clkctrl from end of
* node name with _clkdm
*/
provider->clkdm_name[strlen(provider->clkdm_name) - 7] = 0;
}
strcat(provider->clkdm_name, "clkdm");
/* Replace any dash from the clkdm name with underscore */
c = provider->clkdm_name;
while (*c) {
if (*c == '-')
*c = '_';
c++;
}
INIT_LIST_HEAD(&provider->clocks);
/* Generate clocks */
reg_data = data->regs;
while (reg_data->parent) {
if ((reg_data->flags & CLKF_SOC_MASK) &&
(reg_data->flags & soc_mask) == 0) {
reg_data++;
continue;
}
hw = kzalloc(sizeof(*hw), GFP_KERNEL);
if (!hw)
return;
hw->enable_reg.ptr = provider->base + reg_data->offset;
_ti_clkctrl_setup_subclks(provider, node, reg_data,
hw->enable_reg.ptr);
if (reg_data->flags & CLKF_SW_SUP)
hw->enable_bit = MODULEMODE_SWCTRL;
if (reg_data->flags & CLKF_HW_SUP)
hw->enable_bit = MODULEMODE_HWCTRL;
if (reg_data->flags & CLKF_NO_IDLEST)
set_bit(NO_IDLEST, &hw->flags);
if (reg_data->clkdm_name)
hw->clkdm_name = reg_data->clkdm_name;
else
hw->clkdm_name = provider->clkdm_name;
init.parent_names = &reg_data->parent;
init.num_parents = 1;
init.flags = 0;
if (reg_data->flags & CLKF_SET_RATE_PARENT)
init.flags |= CLK_SET_RATE_PARENT;
if (ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT)
init.name = kasprintf(GFP_KERNEL, "%pOFn:%pOFn:%04x:%d",
node->parent, node,
reg_data->offset, 0);
else
init.name = kasprintf(GFP_KERNEL, "%pOFn:%04x:%d",
node, reg_data->offset, 0);
clkctrl_clk = kzalloc(sizeof(*clkctrl_clk), GFP_KERNEL);
if (!init.name || !clkctrl_clk)
goto cleanup;
init.ops = &omap4_clkctrl_clk_ops;
hw->hw.init = &init;
clk = ti_clk_register_omap_hw(NULL, &hw->hw, init.name);
if (IS_ERR_OR_NULL(clk))
goto cleanup;
clkctrl_clk->reg_offset = reg_data->offset;
clkctrl_clk->clk = &hw->hw;
list_add(&clkctrl_clk->node, &provider->clocks);
reg_data++;
}
ret = of_clk_add_hw_provider(node, _ti_omap4_clkctrl_xlate, provider);
if (ret == -EPROBE_DEFER)
ti_clk_retry_init(node, provider, _clkctrl_add_provider);
return;
cleanup:
kfree(hw);
kfree(init.name);
kfree(clkctrl_clk);
}
CLK_OF_DECLARE(ti_omap4_clkctrl_clock, "ti,clkctrl",
_ti_omap4_clkctrl_setup);
/**
* ti_clk_is_in_standby - Check if clkctrl clock is in standby or not
* @clk: clock to check standby status for
*
* Finds whether the provided clock is in standby mode or not. Returns
* true if the provided clock is a clkctrl type clock and it is in standby,
* false otherwise.
*/
bool ti_clk_is_in_standby(struct clk *clk)
{
struct clk_hw *hw;
struct clk_hw_omap *hwclk;
u32 val;
hw = __clk_get_hw(clk);
if (!omap2_clk_is_hw_omap(hw))
return false;
hwclk = to_clk_hw_omap(hw);
val = ti_clk_ll_ops->clk_readl(&hwclk->enable_reg);
if (val & OMAP4_STBYST_MASK)
return true;
return false;
}
EXPORT_SYMBOL_GPL(ti_clk_is_in_standby);
Reference in New Issue View Git Blame Copy Permalink