mirror of
https://github.com/torvalds/linux.git
synced 2024-12-05 02:23:16 +00:00
b16bef60a9
The driver and its bindings, before commit04f9f068a6
("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4") were requiring to provide at least one safe/default voltage for DVS registers if DVS GPIO is not being enabled. IOW, if s5m8767,pmic-buck2-uses-gpio-dvs is missing, the s5m8767,pmic-buck2-dvs-voltage should still be present and contain one voltage. This requirement was coming from driver behavior matching this condition (none of DVS GPIO is enabled): it was always initializing the DVS selector pins to 0 and keeping the DVS enable setting at reset value (enabled). Therefore if none of DVS GPIO is enabled in devicetree, driver was configuring the first DVS voltage for buck[234]. Mentioned commit04f9f068a6
("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4") broke it because DVS voltage won't be parsed from devicetree if DVS GPIO is not enabled. After the change, driver will configure bucks to use the register reset value as voltage which might have unpleasant effects. Fix this by relaxing the bindings constrain: if DVS GPIO is not enabled in devicetree (therefore DVS voltage is also not parsed), explicitly disable it. Cc: <stable@vger.kernel.org> Fixes:04f9f068a6
("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Rob Herring <robh@kernel.org> Message-Id: <20211008113723.134648-2-krzysztof.kozlowski@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
1013 lines
26 KiB
C
1013 lines
26 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
//
|
|
// Copyright (c) 2011 Samsung Electronics Co., Ltd
|
|
// http://www.samsung.com
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/mfd/samsung/core.h>
|
|
#include <linux/mfd/samsung/s5m8767.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#define S5M8767_OPMODE_NORMAL_MODE 0x1
|
|
|
|
struct s5m8767_info {
|
|
struct device *dev;
|
|
struct sec_pmic_dev *iodev;
|
|
int num_regulators;
|
|
struct sec_opmode_data *opmode;
|
|
|
|
int ramp_delay;
|
|
bool buck2_ramp;
|
|
bool buck3_ramp;
|
|
bool buck4_ramp;
|
|
|
|
bool buck2_gpiodvs;
|
|
bool buck3_gpiodvs;
|
|
bool buck4_gpiodvs;
|
|
u8 buck2_vol[8];
|
|
u8 buck3_vol[8];
|
|
u8 buck4_vol[8];
|
|
int buck_gpios[3];
|
|
int buck_ds[3];
|
|
int buck_gpioindex;
|
|
};
|
|
|
|
struct sec_voltage_desc {
|
|
int max;
|
|
int min;
|
|
int step;
|
|
};
|
|
|
|
static const struct sec_voltage_desc buck_voltage_val1 = {
|
|
.max = 2225000,
|
|
.min = 650000,
|
|
.step = 6250,
|
|
};
|
|
|
|
static const struct sec_voltage_desc buck_voltage_val2 = {
|
|
.max = 1600000,
|
|
.min = 600000,
|
|
.step = 6250,
|
|
};
|
|
|
|
static const struct sec_voltage_desc buck_voltage_val3 = {
|
|
.max = 3000000,
|
|
.min = 750000,
|
|
.step = 12500,
|
|
};
|
|
|
|
static const struct sec_voltage_desc ldo_voltage_val1 = {
|
|
.max = 3950000,
|
|
.min = 800000,
|
|
.step = 50000,
|
|
};
|
|
|
|
static const struct sec_voltage_desc ldo_voltage_val2 = {
|
|
.max = 2375000,
|
|
.min = 800000,
|
|
.step = 25000,
|
|
};
|
|
|
|
static const struct sec_voltage_desc *reg_voltage_map[] = {
|
|
[S5M8767_LDO1] = &ldo_voltage_val2,
|
|
[S5M8767_LDO2] = &ldo_voltage_val2,
|
|
[S5M8767_LDO3] = &ldo_voltage_val1,
|
|
[S5M8767_LDO4] = &ldo_voltage_val1,
|
|
[S5M8767_LDO5] = &ldo_voltage_val1,
|
|
[S5M8767_LDO6] = &ldo_voltage_val2,
|
|
[S5M8767_LDO7] = &ldo_voltage_val2,
|
|
[S5M8767_LDO8] = &ldo_voltage_val2,
|
|
[S5M8767_LDO9] = &ldo_voltage_val1,
|
|
[S5M8767_LDO10] = &ldo_voltage_val1,
|
|
[S5M8767_LDO11] = &ldo_voltage_val1,
|
|
[S5M8767_LDO12] = &ldo_voltage_val1,
|
|
[S5M8767_LDO13] = &ldo_voltage_val1,
|
|
[S5M8767_LDO14] = &ldo_voltage_val1,
|
|
[S5M8767_LDO15] = &ldo_voltage_val2,
|
|
[S5M8767_LDO16] = &ldo_voltage_val1,
|
|
[S5M8767_LDO17] = &ldo_voltage_val1,
|
|
[S5M8767_LDO18] = &ldo_voltage_val1,
|
|
[S5M8767_LDO19] = &ldo_voltage_val1,
|
|
[S5M8767_LDO20] = &ldo_voltage_val1,
|
|
[S5M8767_LDO21] = &ldo_voltage_val1,
|
|
[S5M8767_LDO22] = &ldo_voltage_val1,
|
|
[S5M8767_LDO23] = &ldo_voltage_val1,
|
|
[S5M8767_LDO24] = &ldo_voltage_val1,
|
|
[S5M8767_LDO25] = &ldo_voltage_val1,
|
|
[S5M8767_LDO26] = &ldo_voltage_val1,
|
|
[S5M8767_LDO27] = &ldo_voltage_val1,
|
|
[S5M8767_LDO28] = &ldo_voltage_val1,
|
|
[S5M8767_BUCK1] = &buck_voltage_val1,
|
|
[S5M8767_BUCK2] = &buck_voltage_val2,
|
|
[S5M8767_BUCK3] = &buck_voltage_val2,
|
|
[S5M8767_BUCK4] = &buck_voltage_val2,
|
|
[S5M8767_BUCK5] = &buck_voltage_val1,
|
|
[S5M8767_BUCK6] = &buck_voltage_val1,
|
|
[S5M8767_BUCK7] = &buck_voltage_val3,
|
|
[S5M8767_BUCK8] = &buck_voltage_val3,
|
|
[S5M8767_BUCK9] = &buck_voltage_val3,
|
|
};
|
|
|
|
static const unsigned int s5m8767_opmode_reg[][4] = {
|
|
/* {OFF, ON, LOWPOWER, SUSPEND} */
|
|
/* LDO1 ... LDO28 */
|
|
{0x0, 0x3, 0x2, 0x1}, /* LDO1 */
|
|
{0x0, 0x3, 0x2, 0x1},
|
|
{0x0, 0x3, 0x2, 0x1},
|
|
{0x0, 0x0, 0x0, 0x0},
|
|
{0x0, 0x3, 0x2, 0x1}, /* LDO5 */
|
|
{0x0, 0x3, 0x2, 0x1},
|
|
{0x0, 0x3, 0x2, 0x1},
|
|
{0x0, 0x3, 0x2, 0x1},
|
|
{0x0, 0x3, 0x2, 0x1},
|
|
{0x0, 0x3, 0x2, 0x1}, /* LDO10 */
|
|
{0x0, 0x3, 0x2, 0x1},
|
|
{0x0, 0x3, 0x2, 0x1},
|
|
{0x0, 0x3, 0x2, 0x1},
|
|
{0x0, 0x3, 0x2, 0x1},
|
|
{0x0, 0x3, 0x2, 0x1}, /* LDO15 */
|
|
{0x0, 0x3, 0x2, 0x1},
|
|
{0x0, 0x3, 0x2, 0x1},
|
|
{0x0, 0x0, 0x0, 0x0},
|
|
{0x0, 0x3, 0x2, 0x1},
|
|
{0x0, 0x3, 0x2, 0x1}, /* LDO20 */
|
|
{0x0, 0x3, 0x2, 0x1},
|
|
{0x0, 0x3, 0x2, 0x1},
|
|
{0x0, 0x0, 0x0, 0x0},
|
|
{0x0, 0x3, 0x2, 0x1},
|
|
{0x0, 0x3, 0x2, 0x1}, /* LDO25 */
|
|
{0x0, 0x3, 0x2, 0x1},
|
|
{0x0, 0x3, 0x2, 0x1},
|
|
{0x0, 0x3, 0x2, 0x1}, /* LDO28 */
|
|
|
|
/* BUCK1 ... BUCK9 */
|
|
{0x0, 0x3, 0x1, 0x1}, /* BUCK1 */
|
|
{0x0, 0x3, 0x1, 0x1},
|
|
{0x0, 0x3, 0x1, 0x1},
|
|
{0x0, 0x3, 0x1, 0x1},
|
|
{0x0, 0x3, 0x2, 0x1}, /* BUCK5 */
|
|
{0x0, 0x3, 0x1, 0x1},
|
|
{0x0, 0x3, 0x1, 0x1},
|
|
{0x0, 0x3, 0x1, 0x1},
|
|
{0x0, 0x3, 0x1, 0x1}, /* BUCK9 */
|
|
};
|
|
|
|
static int s5m8767_get_register(struct s5m8767_info *s5m8767, int reg_id,
|
|
int *reg, int *enable_ctrl)
|
|
{
|
|
int i;
|
|
unsigned int mode;
|
|
|
|
switch (reg_id) {
|
|
case S5M8767_LDO1 ... S5M8767_LDO2:
|
|
*reg = S5M8767_REG_LDO1CTRL + (reg_id - S5M8767_LDO1);
|
|
break;
|
|
case S5M8767_LDO3 ... S5M8767_LDO28:
|
|
*reg = S5M8767_REG_LDO3CTRL + (reg_id - S5M8767_LDO3);
|
|
break;
|
|
case S5M8767_BUCK1:
|
|
*reg = S5M8767_REG_BUCK1CTRL1;
|
|
break;
|
|
case S5M8767_BUCK2 ... S5M8767_BUCK4:
|
|
*reg = S5M8767_REG_BUCK2CTRL + (reg_id - S5M8767_BUCK2) * 9;
|
|
break;
|
|
case S5M8767_BUCK5:
|
|
*reg = S5M8767_REG_BUCK5CTRL1;
|
|
break;
|
|
case S5M8767_BUCK6 ... S5M8767_BUCK9:
|
|
*reg = S5M8767_REG_BUCK6CTRL1 + (reg_id - S5M8767_BUCK6) * 2;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < s5m8767->num_regulators; i++) {
|
|
if (s5m8767->opmode[i].id == reg_id) {
|
|
mode = s5m8767->opmode[i].mode;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i >= s5m8767->num_regulators)
|
|
return -EINVAL;
|
|
|
|
*enable_ctrl = s5m8767_opmode_reg[reg_id][mode] << S5M8767_ENCTRL_SHIFT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s5m8767_get_vsel_reg(int reg_id, struct s5m8767_info *s5m8767)
|
|
{
|
|
int reg;
|
|
|
|
switch (reg_id) {
|
|
case S5M8767_LDO1 ... S5M8767_LDO2:
|
|
reg = S5M8767_REG_LDO1CTRL + (reg_id - S5M8767_LDO1);
|
|
break;
|
|
case S5M8767_LDO3 ... S5M8767_LDO28:
|
|
reg = S5M8767_REG_LDO3CTRL + (reg_id - S5M8767_LDO3);
|
|
break;
|
|
case S5M8767_BUCK1:
|
|
reg = S5M8767_REG_BUCK1CTRL2;
|
|
break;
|
|
case S5M8767_BUCK2:
|
|
reg = S5M8767_REG_BUCK2DVS1;
|
|
if (s5m8767->buck2_gpiodvs)
|
|
reg += s5m8767->buck_gpioindex;
|
|
break;
|
|
case S5M8767_BUCK3:
|
|
reg = S5M8767_REG_BUCK3DVS1;
|
|
if (s5m8767->buck3_gpiodvs)
|
|
reg += s5m8767->buck_gpioindex;
|
|
break;
|
|
case S5M8767_BUCK4:
|
|
reg = S5M8767_REG_BUCK4DVS1;
|
|
if (s5m8767->buck4_gpiodvs)
|
|
reg += s5m8767->buck_gpioindex;
|
|
break;
|
|
case S5M8767_BUCK5:
|
|
reg = S5M8767_REG_BUCK5CTRL2;
|
|
break;
|
|
case S5M8767_BUCK6 ... S5M8767_BUCK9:
|
|
reg = S5M8767_REG_BUCK6CTRL2 + (reg_id - S5M8767_BUCK6) * 2;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return reg;
|
|
}
|
|
|
|
static int s5m8767_convert_voltage_to_sel(const struct sec_voltage_desc *desc,
|
|
int min_vol)
|
|
{
|
|
int selector = 0;
|
|
|
|
if (desc == NULL)
|
|
return -EINVAL;
|
|
|
|
if (min_vol > desc->max)
|
|
return -EINVAL;
|
|
|
|
if (min_vol < desc->min)
|
|
min_vol = desc->min;
|
|
|
|
selector = DIV_ROUND_UP(min_vol - desc->min, desc->step);
|
|
|
|
if (desc->min + desc->step * selector > desc->max)
|
|
return -EINVAL;
|
|
|
|
return selector;
|
|
}
|
|
|
|
static inline int s5m8767_set_high(struct s5m8767_info *s5m8767)
|
|
{
|
|
int temp_index = s5m8767->buck_gpioindex;
|
|
|
|
gpio_set_value(s5m8767->buck_gpios[0], (temp_index >> 2) & 0x1);
|
|
gpio_set_value(s5m8767->buck_gpios[1], (temp_index >> 1) & 0x1);
|
|
gpio_set_value(s5m8767->buck_gpios[2], temp_index & 0x1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int s5m8767_set_low(struct s5m8767_info *s5m8767)
|
|
{
|
|
int temp_index = s5m8767->buck_gpioindex;
|
|
|
|
gpio_set_value(s5m8767->buck_gpios[2], temp_index & 0x1);
|
|
gpio_set_value(s5m8767->buck_gpios[1], (temp_index >> 1) & 0x1);
|
|
gpio_set_value(s5m8767->buck_gpios[0], (temp_index >> 2) & 0x1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s5m8767_set_voltage_sel(struct regulator_dev *rdev,
|
|
unsigned selector)
|
|
{
|
|
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
|
|
int reg_id = rdev_get_id(rdev);
|
|
int old_index, index = 0;
|
|
u8 *buck234_vol = NULL;
|
|
|
|
switch (reg_id) {
|
|
case S5M8767_LDO1 ... S5M8767_LDO28:
|
|
break;
|
|
case S5M8767_BUCK1 ... S5M8767_BUCK6:
|
|
if (reg_id == S5M8767_BUCK2 && s5m8767->buck2_gpiodvs)
|
|
buck234_vol = &s5m8767->buck2_vol[0];
|
|
else if (reg_id == S5M8767_BUCK3 && s5m8767->buck3_gpiodvs)
|
|
buck234_vol = &s5m8767->buck3_vol[0];
|
|
else if (reg_id == S5M8767_BUCK4 && s5m8767->buck4_gpiodvs)
|
|
buck234_vol = &s5m8767->buck4_vol[0];
|
|
break;
|
|
case S5M8767_BUCK7 ... S5M8767_BUCK8:
|
|
return -EINVAL;
|
|
case S5M8767_BUCK9:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* buck234_vol != NULL means to control buck234 voltage via DVS GPIO */
|
|
if (buck234_vol) {
|
|
while (*buck234_vol != selector) {
|
|
buck234_vol++;
|
|
index++;
|
|
}
|
|
old_index = s5m8767->buck_gpioindex;
|
|
s5m8767->buck_gpioindex = index;
|
|
|
|
if (index > old_index)
|
|
return s5m8767_set_high(s5m8767);
|
|
else
|
|
return s5m8767_set_low(s5m8767);
|
|
} else {
|
|
return regulator_set_voltage_sel_regmap(rdev, selector);
|
|
}
|
|
}
|
|
|
|
static int s5m8767_set_voltage_time_sel(struct regulator_dev *rdev,
|
|
unsigned int old_sel,
|
|
unsigned int new_sel)
|
|
{
|
|
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
|
|
|
|
if ((old_sel < new_sel) && s5m8767->ramp_delay)
|
|
return DIV_ROUND_UP(rdev->desc->uV_step * (new_sel - old_sel),
|
|
s5m8767->ramp_delay * 1000);
|
|
return 0;
|
|
}
|
|
|
|
static const struct regulator_ops s5m8767_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = s5m8767_set_voltage_sel,
|
|
.set_voltage_time_sel = s5m8767_set_voltage_time_sel,
|
|
};
|
|
|
|
static const struct regulator_ops s5m8767_buck78_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
};
|
|
|
|
#define s5m8767_regulator_desc(_name) { \
|
|
.name = #_name, \
|
|
.id = S5M8767_##_name, \
|
|
.ops = &s5m8767_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
}
|
|
|
|
#define s5m8767_regulator_buck78_desc(_name) { \
|
|
.name = #_name, \
|
|
.id = S5M8767_##_name, \
|
|
.ops = &s5m8767_buck78_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
}
|
|
|
|
static struct regulator_desc regulators[] = {
|
|
s5m8767_regulator_desc(LDO1),
|
|
s5m8767_regulator_desc(LDO2),
|
|
s5m8767_regulator_desc(LDO3),
|
|
s5m8767_regulator_desc(LDO4),
|
|
s5m8767_regulator_desc(LDO5),
|
|
s5m8767_regulator_desc(LDO6),
|
|
s5m8767_regulator_desc(LDO7),
|
|
s5m8767_regulator_desc(LDO8),
|
|
s5m8767_regulator_desc(LDO9),
|
|
s5m8767_regulator_desc(LDO10),
|
|
s5m8767_regulator_desc(LDO11),
|
|
s5m8767_regulator_desc(LDO12),
|
|
s5m8767_regulator_desc(LDO13),
|
|
s5m8767_regulator_desc(LDO14),
|
|
s5m8767_regulator_desc(LDO15),
|
|
s5m8767_regulator_desc(LDO16),
|
|
s5m8767_regulator_desc(LDO17),
|
|
s5m8767_regulator_desc(LDO18),
|
|
s5m8767_regulator_desc(LDO19),
|
|
s5m8767_regulator_desc(LDO20),
|
|
s5m8767_regulator_desc(LDO21),
|
|
s5m8767_regulator_desc(LDO22),
|
|
s5m8767_regulator_desc(LDO23),
|
|
s5m8767_regulator_desc(LDO24),
|
|
s5m8767_regulator_desc(LDO25),
|
|
s5m8767_regulator_desc(LDO26),
|
|
s5m8767_regulator_desc(LDO27),
|
|
s5m8767_regulator_desc(LDO28),
|
|
s5m8767_regulator_desc(BUCK1),
|
|
s5m8767_regulator_desc(BUCK2),
|
|
s5m8767_regulator_desc(BUCK3),
|
|
s5m8767_regulator_desc(BUCK4),
|
|
s5m8767_regulator_desc(BUCK5),
|
|
s5m8767_regulator_desc(BUCK6),
|
|
s5m8767_regulator_buck78_desc(BUCK7),
|
|
s5m8767_regulator_buck78_desc(BUCK8),
|
|
s5m8767_regulator_desc(BUCK9),
|
|
};
|
|
|
|
/*
|
|
* Enable GPIO control over BUCK9 in regulator_config for that regulator.
|
|
*/
|
|
static void s5m8767_regulator_config_ext_control(struct s5m8767_info *s5m8767,
|
|
struct sec_regulator_data *rdata,
|
|
struct regulator_config *config)
|
|
{
|
|
int i, mode = 0;
|
|
|
|
if (rdata->id != S5M8767_BUCK9)
|
|
return;
|
|
|
|
/* Check if opmode for regulator matches S5M8767_ENCTRL_USE_GPIO */
|
|
for (i = 0; i < s5m8767->num_regulators; i++) {
|
|
const struct sec_opmode_data *opmode = &s5m8767->opmode[i];
|
|
if (opmode->id == rdata->id) {
|
|
mode = s5m8767_opmode_reg[rdata->id][opmode->mode];
|
|
break;
|
|
}
|
|
}
|
|
if (mode != S5M8767_ENCTRL_USE_GPIO) {
|
|
dev_warn(s5m8767->dev,
|
|
"ext-control for %pOFn: mismatched op_mode (%x), ignoring\n",
|
|
rdata->reg_node, mode);
|
|
return;
|
|
}
|
|
|
|
if (!rdata->ext_control_gpiod) {
|
|
dev_warn(s5m8767->dev,
|
|
"ext-control for %pOFn: GPIO not valid, ignoring\n",
|
|
rdata->reg_node);
|
|
return;
|
|
}
|
|
|
|
config->ena_gpiod = rdata->ext_control_gpiod;
|
|
}
|
|
|
|
/*
|
|
* Turn on GPIO control over BUCK9.
|
|
*/
|
|
static int s5m8767_enable_ext_control(struct s5m8767_info *s5m8767,
|
|
struct regulator_dev *rdev)
|
|
{
|
|
int id = rdev_get_id(rdev);
|
|
int ret, reg, enable_ctrl;
|
|
|
|
if (id != S5M8767_BUCK9)
|
|
return -EINVAL;
|
|
|
|
ret = s5m8767_get_register(s5m8767, id, ®, &enable_ctrl);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return regmap_update_bits(s5m8767->iodev->regmap_pmic,
|
|
reg, S5M8767_ENCTRL_MASK,
|
|
S5M8767_ENCTRL_USE_GPIO << S5M8767_ENCTRL_SHIFT);
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_OF
|
|
static int s5m8767_pmic_dt_parse_dvs_gpio(struct sec_pmic_dev *iodev,
|
|
struct sec_platform_data *pdata,
|
|
struct device_node *pmic_np)
|
|
{
|
|
int i, gpio;
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
gpio = of_get_named_gpio(pmic_np,
|
|
"s5m8767,pmic-buck-dvs-gpios", i);
|
|
if (!gpio_is_valid(gpio)) {
|
|
dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio);
|
|
return -EINVAL;
|
|
}
|
|
pdata->buck_gpios[i] = gpio;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int s5m8767_pmic_dt_parse_ds_gpio(struct sec_pmic_dev *iodev,
|
|
struct sec_platform_data *pdata,
|
|
struct device_node *pmic_np)
|
|
{
|
|
int i, gpio;
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
gpio = of_get_named_gpio(pmic_np,
|
|
"s5m8767,pmic-buck-ds-gpios", i);
|
|
if (!gpio_is_valid(gpio)) {
|
|
dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio);
|
|
return -EINVAL;
|
|
}
|
|
pdata->buck_ds[i] = gpio;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
|
|
struct sec_platform_data *pdata)
|
|
{
|
|
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
|
|
struct device_node *pmic_np, *regulators_np, *reg_np;
|
|
struct sec_regulator_data *rdata;
|
|
struct sec_opmode_data *rmode;
|
|
unsigned int i, dvs_voltage_nr = 8, ret;
|
|
|
|
pmic_np = iodev->dev->of_node;
|
|
if (!pmic_np) {
|
|
dev_err(iodev->dev, "could not find pmic sub-node\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
regulators_np = of_get_child_by_name(pmic_np, "regulators");
|
|
if (!regulators_np) {
|
|
dev_err(iodev->dev, "could not find regulators sub-node\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* count the number of regulators to be supported in pmic */
|
|
pdata->num_regulators = of_get_child_count(regulators_np);
|
|
|
|
rdata = devm_kcalloc(&pdev->dev,
|
|
pdata->num_regulators, sizeof(*rdata),
|
|
GFP_KERNEL);
|
|
if (!rdata) {
|
|
of_node_put(regulators_np);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
rmode = devm_kcalloc(&pdev->dev,
|
|
pdata->num_regulators, sizeof(*rmode),
|
|
GFP_KERNEL);
|
|
if (!rmode) {
|
|
of_node_put(regulators_np);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pdata->regulators = rdata;
|
|
pdata->opmode = rmode;
|
|
for_each_child_of_node(regulators_np, reg_np) {
|
|
for (i = 0; i < ARRAY_SIZE(regulators); i++)
|
|
if (of_node_name_eq(reg_np, regulators[i].name))
|
|
break;
|
|
|
|
if (i == ARRAY_SIZE(regulators)) {
|
|
dev_warn(iodev->dev,
|
|
"don't know how to configure regulator %pOFn\n",
|
|
reg_np);
|
|
continue;
|
|
}
|
|
|
|
rdata->ext_control_gpiod = devm_fwnode_gpiod_get(
|
|
&pdev->dev,
|
|
of_fwnode_handle(reg_np),
|
|
"s5m8767,pmic-ext-control",
|
|
GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
|
|
"s5m8767");
|
|
if (PTR_ERR(rdata->ext_control_gpiod) == -ENOENT) {
|
|
rdata->ext_control_gpiod = NULL;
|
|
} else if (IS_ERR(rdata->ext_control_gpiod)) {
|
|
of_node_put(reg_np);
|
|
of_node_put(regulators_np);
|
|
return PTR_ERR(rdata->ext_control_gpiod);
|
|
}
|
|
|
|
rdata->id = i;
|
|
rdata->initdata = of_get_regulator_init_data(
|
|
&pdev->dev, reg_np,
|
|
®ulators[i]);
|
|
rdata->reg_node = reg_np;
|
|
rdata++;
|
|
rmode->id = i;
|
|
if (of_property_read_u32(reg_np, "op_mode",
|
|
&rmode->mode)) {
|
|
dev_warn(iodev->dev,
|
|
"no op_mode property at %pOF\n",
|
|
reg_np);
|
|
|
|
rmode->mode = S5M8767_OPMODE_NORMAL_MODE;
|
|
}
|
|
rmode++;
|
|
}
|
|
|
|
of_node_put(regulators_np);
|
|
|
|
if (of_get_property(pmic_np, "s5m8767,pmic-buck2-uses-gpio-dvs", NULL)) {
|
|
pdata->buck2_gpiodvs = true;
|
|
|
|
if (of_property_read_u32_array(pmic_np,
|
|
"s5m8767,pmic-buck2-dvs-voltage",
|
|
pdata->buck2_voltage, dvs_voltage_nr)) {
|
|
dev_err(iodev->dev, "buck2 voltages not specified\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (of_get_property(pmic_np, "s5m8767,pmic-buck3-uses-gpio-dvs", NULL)) {
|
|
pdata->buck3_gpiodvs = true;
|
|
|
|
if (of_property_read_u32_array(pmic_np,
|
|
"s5m8767,pmic-buck3-dvs-voltage",
|
|
pdata->buck3_voltage, dvs_voltage_nr)) {
|
|
dev_err(iodev->dev, "buck3 voltages not specified\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (of_get_property(pmic_np, "s5m8767,pmic-buck4-uses-gpio-dvs", NULL)) {
|
|
pdata->buck4_gpiodvs = true;
|
|
|
|
if (of_property_read_u32_array(pmic_np,
|
|
"s5m8767,pmic-buck4-dvs-voltage",
|
|
pdata->buck4_voltage, dvs_voltage_nr)) {
|
|
dev_err(iodev->dev, "buck4 voltages not specified\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
|
|
pdata->buck4_gpiodvs) {
|
|
ret = s5m8767_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np);
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
if (of_property_read_u32(pmic_np,
|
|
"s5m8767,pmic-buck-default-dvs-idx",
|
|
&pdata->buck_default_idx)) {
|
|
pdata->buck_default_idx = 0;
|
|
} else {
|
|
if (pdata->buck_default_idx >= 8) {
|
|
pdata->buck_default_idx = 0;
|
|
dev_info(iodev->dev,
|
|
"invalid value for default dvs index, use 0\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
ret = s5m8767_pmic_dt_parse_ds_gpio(iodev, pdata, pmic_np);
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
if (of_get_property(pmic_np, "s5m8767,pmic-buck2-ramp-enable", NULL))
|
|
pdata->buck2_ramp_enable = true;
|
|
|
|
if (of_get_property(pmic_np, "s5m8767,pmic-buck3-ramp-enable", NULL))
|
|
pdata->buck3_ramp_enable = true;
|
|
|
|
if (of_get_property(pmic_np, "s5m8767,pmic-buck4-ramp-enable", NULL))
|
|
pdata->buck4_ramp_enable = true;
|
|
|
|
if (pdata->buck2_ramp_enable || pdata->buck3_ramp_enable
|
|
|| pdata->buck4_ramp_enable) {
|
|
if (of_property_read_u32(pmic_np, "s5m8767,pmic-buck-ramp-delay",
|
|
&pdata->buck_ramp_delay))
|
|
pdata->buck_ramp_delay = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
|
|
struct sec_platform_data *pdata)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_OF */
|
|
|
|
static int s5m8767_pmic_probe(struct platform_device *pdev)
|
|
{
|
|
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
|
|
struct sec_platform_data *pdata = iodev->pdata;
|
|
struct regulator_config config = { };
|
|
struct s5m8767_info *s5m8767;
|
|
int i, ret, buck_init;
|
|
|
|
if (!pdata) {
|
|
dev_err(pdev->dev.parent, "Platform data not supplied\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (iodev->dev->of_node) {
|
|
ret = s5m8767_pmic_dt_parse_pdata(pdev, pdata);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (pdata->buck2_gpiodvs) {
|
|
if (pdata->buck3_gpiodvs || pdata->buck4_gpiodvs) {
|
|
dev_err(&pdev->dev, "S5M8767 GPIO DVS NOT VALID\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (pdata->buck3_gpiodvs) {
|
|
if (pdata->buck2_gpiodvs || pdata->buck4_gpiodvs) {
|
|
dev_err(&pdev->dev, "S5M8767 GPIO DVS NOT VALID\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (pdata->buck4_gpiodvs) {
|
|
if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs) {
|
|
dev_err(&pdev->dev, "S5M8767 GPIO DVS NOT VALID\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
s5m8767 = devm_kzalloc(&pdev->dev, sizeof(struct s5m8767_info),
|
|
GFP_KERNEL);
|
|
if (!s5m8767)
|
|
return -ENOMEM;
|
|
|
|
s5m8767->dev = &pdev->dev;
|
|
s5m8767->iodev = iodev;
|
|
s5m8767->num_regulators = pdata->num_regulators;
|
|
platform_set_drvdata(pdev, s5m8767);
|
|
|
|
s5m8767->buck_gpioindex = pdata->buck_default_idx;
|
|
s5m8767->buck2_gpiodvs = pdata->buck2_gpiodvs;
|
|
s5m8767->buck3_gpiodvs = pdata->buck3_gpiodvs;
|
|
s5m8767->buck4_gpiodvs = pdata->buck4_gpiodvs;
|
|
s5m8767->buck_gpios[0] = pdata->buck_gpios[0];
|
|
s5m8767->buck_gpios[1] = pdata->buck_gpios[1];
|
|
s5m8767->buck_gpios[2] = pdata->buck_gpios[2];
|
|
s5m8767->buck_ds[0] = pdata->buck_ds[0];
|
|
s5m8767->buck_ds[1] = pdata->buck_ds[1];
|
|
s5m8767->buck_ds[2] = pdata->buck_ds[2];
|
|
|
|
s5m8767->ramp_delay = pdata->buck_ramp_delay;
|
|
s5m8767->buck2_ramp = pdata->buck2_ramp_enable;
|
|
s5m8767->buck3_ramp = pdata->buck3_ramp_enable;
|
|
s5m8767->buck4_ramp = pdata->buck4_ramp_enable;
|
|
s5m8767->opmode = pdata->opmode;
|
|
|
|
buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
|
|
pdata->buck2_init);
|
|
|
|
regmap_write(s5m8767->iodev->regmap_pmic, S5M8767_REG_BUCK2DVS2,
|
|
buck_init);
|
|
|
|
buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
|
|
pdata->buck3_init);
|
|
|
|
regmap_write(s5m8767->iodev->regmap_pmic, S5M8767_REG_BUCK3DVS2,
|
|
buck_init);
|
|
|
|
buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2,
|
|
pdata->buck4_init);
|
|
|
|
regmap_write(s5m8767->iodev->regmap_pmic, S5M8767_REG_BUCK4DVS2,
|
|
buck_init);
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
if (s5m8767->buck2_gpiodvs) {
|
|
s5m8767->buck2_vol[i] =
|
|
s5m8767_convert_voltage_to_sel(
|
|
&buck_voltage_val2,
|
|
pdata->buck2_voltage[i]);
|
|
}
|
|
|
|
if (s5m8767->buck3_gpiodvs) {
|
|
s5m8767->buck3_vol[i] =
|
|
s5m8767_convert_voltage_to_sel(
|
|
&buck_voltage_val2,
|
|
pdata->buck3_voltage[i]);
|
|
}
|
|
|
|
if (s5m8767->buck4_gpiodvs) {
|
|
s5m8767->buck4_vol[i] =
|
|
s5m8767_convert_voltage_to_sel(
|
|
&buck_voltage_val2,
|
|
pdata->buck4_voltage[i]);
|
|
}
|
|
}
|
|
|
|
if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
|
|
pdata->buck4_gpiodvs) {
|
|
|
|
if (!gpio_is_valid(pdata->buck_gpios[0]) ||
|
|
!gpio_is_valid(pdata->buck_gpios[1]) ||
|
|
!gpio_is_valid(pdata->buck_gpios[2])) {
|
|
dev_err(&pdev->dev, "GPIO NOT VALID\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = devm_gpio_request(&pdev->dev, pdata->buck_gpios[0],
|
|
"S5M8767 SET1");
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_gpio_request(&pdev->dev, pdata->buck_gpios[1],
|
|
"S5M8767 SET2");
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_gpio_request(&pdev->dev, pdata->buck_gpios[2],
|
|
"S5M8767 SET3");
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* SET1 GPIO */
|
|
gpio_direction_output(pdata->buck_gpios[0],
|
|
(s5m8767->buck_gpioindex >> 2) & 0x1);
|
|
/* SET2 GPIO */
|
|
gpio_direction_output(pdata->buck_gpios[1],
|
|
(s5m8767->buck_gpioindex >> 1) & 0x1);
|
|
/* SET3 GPIO */
|
|
gpio_direction_output(pdata->buck_gpios[2],
|
|
(s5m8767->buck_gpioindex >> 0) & 0x1);
|
|
}
|
|
|
|
ret = devm_gpio_request(&pdev->dev, pdata->buck_ds[0], "S5M8767 DS2");
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_gpio_request(&pdev->dev, pdata->buck_ds[1], "S5M8767 DS3");
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_gpio_request(&pdev->dev, pdata->buck_ds[2], "S5M8767 DS4");
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* DS2 GPIO */
|
|
gpio_direction_output(pdata->buck_ds[0], 0x0);
|
|
/* DS3 GPIO */
|
|
gpio_direction_output(pdata->buck_ds[1], 0x0);
|
|
/* DS4 GPIO */
|
|
gpio_direction_output(pdata->buck_ds[2], 0x0);
|
|
|
|
regmap_update_bits(s5m8767->iodev->regmap_pmic,
|
|
S5M8767_REG_BUCK2CTRL, 1 << 1,
|
|
(pdata->buck2_gpiodvs) ? (1 << 1) : (0 << 1));
|
|
regmap_update_bits(s5m8767->iodev->regmap_pmic,
|
|
S5M8767_REG_BUCK3CTRL, 1 << 1,
|
|
(pdata->buck3_gpiodvs) ? (1 << 1) : (0 << 1));
|
|
regmap_update_bits(s5m8767->iodev->regmap_pmic,
|
|
S5M8767_REG_BUCK4CTRL, 1 << 1,
|
|
(pdata->buck4_gpiodvs) ? (1 << 1) : (0 << 1));
|
|
|
|
/* Initialize GPIO DVS registers */
|
|
for (i = 0; i < 8; i++) {
|
|
if (s5m8767->buck2_gpiodvs) {
|
|
regmap_write(s5m8767->iodev->regmap_pmic,
|
|
S5M8767_REG_BUCK2DVS1 + i,
|
|
s5m8767->buck2_vol[i]);
|
|
}
|
|
|
|
if (s5m8767->buck3_gpiodvs) {
|
|
regmap_write(s5m8767->iodev->regmap_pmic,
|
|
S5M8767_REG_BUCK3DVS1 + i,
|
|
s5m8767->buck3_vol[i]);
|
|
}
|
|
|
|
if (s5m8767->buck4_gpiodvs) {
|
|
regmap_write(s5m8767->iodev->regmap_pmic,
|
|
S5M8767_REG_BUCK4DVS1 + i,
|
|
s5m8767->buck4_vol[i]);
|
|
}
|
|
}
|
|
|
|
if (s5m8767->buck2_ramp)
|
|
regmap_update_bits(s5m8767->iodev->regmap_pmic,
|
|
S5M8767_REG_DVSRAMP, 0x08, 0x08);
|
|
|
|
if (s5m8767->buck3_ramp)
|
|
regmap_update_bits(s5m8767->iodev->regmap_pmic,
|
|
S5M8767_REG_DVSRAMP, 0x04, 0x04);
|
|
|
|
if (s5m8767->buck4_ramp)
|
|
regmap_update_bits(s5m8767->iodev->regmap_pmic,
|
|
S5M8767_REG_DVSRAMP, 0x02, 0x02);
|
|
|
|
if (s5m8767->buck2_ramp || s5m8767->buck3_ramp
|
|
|| s5m8767->buck4_ramp) {
|
|
unsigned int val;
|
|
switch (s5m8767->ramp_delay) {
|
|
case 5:
|
|
val = S5M8767_DVS_BUCK_RAMP_5;
|
|
break;
|
|
case 10:
|
|
val = S5M8767_DVS_BUCK_RAMP_10;
|
|
break;
|
|
case 25:
|
|
val = S5M8767_DVS_BUCK_RAMP_25;
|
|
break;
|
|
case 50:
|
|
val = S5M8767_DVS_BUCK_RAMP_50;
|
|
break;
|
|
case 100:
|
|
val = S5M8767_DVS_BUCK_RAMP_100;
|
|
break;
|
|
default:
|
|
val = S5M8767_DVS_BUCK_RAMP_10;
|
|
}
|
|
regmap_update_bits(s5m8767->iodev->regmap_pmic,
|
|
S5M8767_REG_DVSRAMP,
|
|
S5M8767_DVS_BUCK_RAMP_MASK,
|
|
val << S5M8767_DVS_BUCK_RAMP_SHIFT);
|
|
}
|
|
|
|
for (i = 0; i < pdata->num_regulators; i++) {
|
|
const struct sec_voltage_desc *desc;
|
|
int id = pdata->regulators[i].id;
|
|
int enable_reg, enable_val;
|
|
struct regulator_dev *rdev;
|
|
|
|
desc = reg_voltage_map[id];
|
|
if (desc) {
|
|
regulators[id].n_voltages =
|
|
(desc->max - desc->min) / desc->step + 1;
|
|
regulators[id].min_uV = desc->min;
|
|
regulators[id].uV_step = desc->step;
|
|
regulators[id].vsel_reg =
|
|
s5m8767_get_vsel_reg(id, s5m8767);
|
|
if (id < S5M8767_BUCK1)
|
|
regulators[id].vsel_mask = 0x3f;
|
|
else
|
|
regulators[id].vsel_mask = 0xff;
|
|
|
|
ret = s5m8767_get_register(s5m8767, id, &enable_reg,
|
|
&enable_val);
|
|
if (ret) {
|
|
dev_err(s5m8767->dev, "error reading registers\n");
|
|
return ret;
|
|
}
|
|
regulators[id].enable_reg = enable_reg;
|
|
regulators[id].enable_mask = S5M8767_ENCTRL_MASK;
|
|
regulators[id].enable_val = enable_val;
|
|
}
|
|
|
|
config.dev = s5m8767->dev;
|
|
config.init_data = pdata->regulators[i].initdata;
|
|
config.driver_data = s5m8767;
|
|
config.regmap = iodev->regmap_pmic;
|
|
config.of_node = pdata->regulators[i].reg_node;
|
|
config.ena_gpiod = NULL;
|
|
if (pdata->regulators[i].ext_control_gpiod) {
|
|
/* Assigns config.ena_gpiod */
|
|
s5m8767_regulator_config_ext_control(s5m8767,
|
|
&pdata->regulators[i], &config);
|
|
|
|
/*
|
|
* Hand the GPIO descriptor management over to the
|
|
* regulator core, remove it from devres management.
|
|
*/
|
|
devm_gpiod_unhinge(s5m8767->dev, config.ena_gpiod);
|
|
}
|
|
rdev = devm_regulator_register(&pdev->dev, ®ulators[id],
|
|
&config);
|
|
if (IS_ERR(rdev)) {
|
|
ret = PTR_ERR(rdev);
|
|
dev_err(s5m8767->dev, "regulator init failed for %d\n",
|
|
id);
|
|
return ret;
|
|
}
|
|
|
|
if (pdata->regulators[i].ext_control_gpiod) {
|
|
ret = s5m8767_enable_ext_control(s5m8767, rdev);
|
|
if (ret < 0) {
|
|
dev_err(s5m8767->dev,
|
|
"failed to enable gpio control over %s: %d\n",
|
|
rdev->desc->name, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct platform_device_id s5m8767_pmic_id[] = {
|
|
{ "s5m8767-pmic", 0},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, s5m8767_pmic_id);
|
|
|
|
static struct platform_driver s5m8767_pmic_driver = {
|
|
.driver = {
|
|
.name = "s5m8767-pmic",
|
|
},
|
|
.probe = s5m8767_pmic_probe,
|
|
.id_table = s5m8767_pmic_id,
|
|
};
|
|
module_platform_driver(s5m8767_pmic_driver);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
|
|
MODULE_DESCRIPTION("Samsung S5M8767 Regulator Driver");
|
|
MODULE_LICENSE("GPL");
|