mirror of
https://github.com/torvalds/linux.git
synced 2024-12-05 10:32:35 +00:00
962f170d93
According to the datasheet http://www.ti.com/lit/ds/symlink/lm36274.pdf:
Table 23. VPOS Bias Register Field Descriptions VPOS[5:0]:
VPOS voltage (50-mV steps): VPOS = 4 V + (Code × 50 mV), 6.5 V max
000000 = 4 V
000001 = 4.05 V
:
011110 = 5.5 V (Default)
:
110010 = 6.5 V
110011 to 111111 map to 6.5 V
So the LM36274_LDO_VSEL_MAX should be 0b110010 (0x32).
The valid selectors are 0 ... LM36274_LDO_VSEL_MAX, n_voltages should be
LM36274_LDO_VSEL_MAX + 1. Similarly, the n_voltages should be
LM36274_BOOST_VSEL_MAX + 1 for LM36274_BOOST.
Fixes: bff5e80715
("regulator: lm363x: Add support for LM36274")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20190626132632.32629-2-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
367 lines
10 KiB
C
367 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* TI LM363X Regulator Driver
|
|
*
|
|
* Copyright 2015 Texas Instruments
|
|
*
|
|
* Author: Milo Kim <milo.kim@ti.com>
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/ti-lmu.h>
|
|
#include <linux/mfd/ti-lmu-register.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* LM3631 */
|
|
#define LM3631_BOOST_VSEL_MAX 0x25
|
|
#define LM3631_LDO_VSEL_MAX 0x28
|
|
#define LM3631_CONT_VSEL_MAX 0x03
|
|
#define LM3631_VBOOST_MIN 4500000
|
|
#define LM3631_VCONT_MIN 1800000
|
|
#define LM3631_VLDO_MIN 4000000
|
|
#define ENABLE_TIME_USEC 1000
|
|
|
|
/* LM3632 */
|
|
#define LM3632_BOOST_VSEL_MAX 0x26
|
|
#define LM3632_LDO_VSEL_MAX 0x28
|
|
#define LM3632_VBOOST_MIN 4500000
|
|
#define LM3632_VLDO_MIN 4000000
|
|
|
|
/* LM36274 */
|
|
#define LM36274_BOOST_VSEL_MAX 0x3f
|
|
#define LM36274_LDO_VSEL_MAX 0x32
|
|
#define LM36274_VOLTAGE_MIN 4000000
|
|
|
|
/* Common */
|
|
#define LM363X_STEP_50mV 50000
|
|
#define LM363X_STEP_500mV 500000
|
|
|
|
static const int ldo_cont_enable_time[] = {
|
|
0, 2000, 5000, 10000, 20000, 50000, 100000, 200000,
|
|
};
|
|
|
|
static int lm363x_regulator_enable_time(struct regulator_dev *rdev)
|
|
{
|
|
enum lm363x_regulator_id id = rdev_get_id(rdev);
|
|
unsigned int val, addr, mask;
|
|
|
|
switch (id) {
|
|
case LM3631_LDO_CONT:
|
|
addr = LM3631_REG_ENTIME_VCONT;
|
|
mask = LM3631_ENTIME_CONT_MASK;
|
|
break;
|
|
case LM3631_LDO_OREF:
|
|
addr = LM3631_REG_ENTIME_VOREF;
|
|
mask = LM3631_ENTIME_MASK;
|
|
break;
|
|
case LM3631_LDO_POS:
|
|
addr = LM3631_REG_ENTIME_VPOS;
|
|
mask = LM3631_ENTIME_MASK;
|
|
break;
|
|
case LM3631_LDO_NEG:
|
|
addr = LM3631_REG_ENTIME_VNEG;
|
|
mask = LM3631_ENTIME_MASK;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
if (regmap_read(rdev->regmap, addr, &val))
|
|
return -EINVAL;
|
|
|
|
val = (val & mask) >> LM3631_ENTIME_SHIFT;
|
|
|
|
if (id == LM3631_LDO_CONT)
|
|
return ldo_cont_enable_time[val];
|
|
else
|
|
return ENABLE_TIME_USEC * val;
|
|
}
|
|
|
|
static const struct regulator_ops lm363x_boost_voltage_table_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
};
|
|
|
|
static const struct regulator_ops lm363x_regulator_voltage_table_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.enable_time = lm363x_regulator_enable_time,
|
|
};
|
|
|
|
static const struct regulator_desc lm363x_regulator_desc[] = {
|
|
/* LM3631 */
|
|
{
|
|
.name = "vboost",
|
|
.of_match = "vboost",
|
|
.id = LM3631_BOOST,
|
|
.ops = &lm363x_boost_voltage_table_ops,
|
|
.n_voltages = LM3631_BOOST_VSEL_MAX + 1,
|
|
.min_uV = LM3631_VBOOST_MIN,
|
|
.uV_step = LM363X_STEP_50mV,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.vsel_reg = LM3631_REG_VOUT_BOOST,
|
|
.vsel_mask = LM3631_VOUT_MASK,
|
|
},
|
|
{
|
|
.name = "ldo_cont",
|
|
.of_match = "vcont",
|
|
.id = LM3631_LDO_CONT,
|
|
.ops = &lm363x_regulator_voltage_table_ops,
|
|
.n_voltages = LM3631_CONT_VSEL_MAX + 1,
|
|
.min_uV = LM3631_VCONT_MIN,
|
|
.uV_step = LM363X_STEP_500mV,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.vsel_reg = LM3631_REG_VOUT_CONT,
|
|
.vsel_mask = LM3631_VOUT_CONT_MASK,
|
|
.enable_reg = LM3631_REG_LDO_CTRL2,
|
|
.enable_mask = LM3631_EN_CONT_MASK,
|
|
},
|
|
{
|
|
.name = "ldo_oref",
|
|
.of_match = "voref",
|
|
.id = LM3631_LDO_OREF,
|
|
.ops = &lm363x_regulator_voltage_table_ops,
|
|
.n_voltages = LM3631_LDO_VSEL_MAX + 1,
|
|
.min_uV = LM3631_VLDO_MIN,
|
|
.uV_step = LM363X_STEP_50mV,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.vsel_reg = LM3631_REG_VOUT_OREF,
|
|
.vsel_mask = LM3631_VOUT_MASK,
|
|
.enable_reg = LM3631_REG_LDO_CTRL1,
|
|
.enable_mask = LM3631_EN_OREF_MASK,
|
|
},
|
|
{
|
|
.name = "ldo_vpos",
|
|
.of_match = "vpos",
|
|
.id = LM3631_LDO_POS,
|
|
.ops = &lm363x_regulator_voltage_table_ops,
|
|
.n_voltages = LM3631_LDO_VSEL_MAX + 1,
|
|
.min_uV = LM3631_VLDO_MIN,
|
|
.uV_step = LM363X_STEP_50mV,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.vsel_reg = LM3631_REG_VOUT_POS,
|
|
.vsel_mask = LM3631_VOUT_MASK,
|
|
.enable_reg = LM3631_REG_LDO_CTRL1,
|
|
.enable_mask = LM3631_EN_VPOS_MASK,
|
|
},
|
|
{
|
|
.name = "ldo_vneg",
|
|
.of_match = "vneg",
|
|
.id = LM3631_LDO_NEG,
|
|
.ops = &lm363x_regulator_voltage_table_ops,
|
|
.n_voltages = LM3631_LDO_VSEL_MAX + 1,
|
|
.min_uV = LM3631_VLDO_MIN,
|
|
.uV_step = LM363X_STEP_50mV,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.vsel_reg = LM3631_REG_VOUT_NEG,
|
|
.vsel_mask = LM3631_VOUT_MASK,
|
|
.enable_reg = LM3631_REG_LDO_CTRL1,
|
|
.enable_mask = LM3631_EN_VNEG_MASK,
|
|
},
|
|
/* LM3632 */
|
|
{
|
|
.name = "vboost",
|
|
.of_match = "vboost",
|
|
.id = LM3632_BOOST,
|
|
.ops = &lm363x_boost_voltage_table_ops,
|
|
.n_voltages = LM3632_BOOST_VSEL_MAX + 1,
|
|
.min_uV = LM3632_VBOOST_MIN,
|
|
.uV_step = LM363X_STEP_50mV,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.vsel_reg = LM3632_REG_VOUT_BOOST,
|
|
.vsel_mask = LM3632_VOUT_MASK,
|
|
},
|
|
{
|
|
.name = "ldo_vpos",
|
|
.of_match = "vpos",
|
|
.id = LM3632_LDO_POS,
|
|
.ops = &lm363x_regulator_voltage_table_ops,
|
|
.n_voltages = LM3632_LDO_VSEL_MAX + 1,
|
|
.min_uV = LM3632_VLDO_MIN,
|
|
.uV_step = LM363X_STEP_50mV,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.vsel_reg = LM3632_REG_VOUT_POS,
|
|
.vsel_mask = LM3632_VOUT_MASK,
|
|
.enable_reg = LM3632_REG_BIAS_CONFIG,
|
|
.enable_mask = LM3632_EN_VPOS_MASK,
|
|
},
|
|
{
|
|
.name = "ldo_vneg",
|
|
.of_match = "vneg",
|
|
.id = LM3632_LDO_NEG,
|
|
.ops = &lm363x_regulator_voltage_table_ops,
|
|
.n_voltages = LM3632_LDO_VSEL_MAX + 1,
|
|
.min_uV = LM3632_VLDO_MIN,
|
|
.uV_step = LM363X_STEP_50mV,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.vsel_reg = LM3632_REG_VOUT_NEG,
|
|
.vsel_mask = LM3632_VOUT_MASK,
|
|
.enable_reg = LM3632_REG_BIAS_CONFIG,
|
|
.enable_mask = LM3632_EN_VNEG_MASK,
|
|
},
|
|
|
|
/* LM36274 */
|
|
{
|
|
.name = "vboost",
|
|
.of_match = "vboost",
|
|
.id = LM36274_BOOST,
|
|
.ops = &lm363x_boost_voltage_table_ops,
|
|
.n_voltages = LM36274_BOOST_VSEL_MAX + 1,
|
|
.min_uV = LM36274_VOLTAGE_MIN,
|
|
.uV_step = LM363X_STEP_50mV,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.vsel_reg = LM36274_REG_VOUT_BOOST,
|
|
.vsel_mask = LM36274_VOUT_MASK,
|
|
},
|
|
{
|
|
.name = "ldo_vpos",
|
|
.of_match = "vpos",
|
|
.id = LM36274_LDO_POS,
|
|
.ops = &lm363x_regulator_voltage_table_ops,
|
|
.n_voltages = LM36274_LDO_VSEL_MAX + 1,
|
|
.min_uV = LM36274_VOLTAGE_MIN,
|
|
.uV_step = LM363X_STEP_50mV,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.vsel_reg = LM36274_REG_VOUT_POS,
|
|
.vsel_mask = LM36274_VOUT_MASK,
|
|
.enable_reg = LM36274_REG_BIAS_CONFIG_1,
|
|
.enable_mask = LM36274_EN_VPOS_MASK,
|
|
},
|
|
{
|
|
.name = "ldo_vneg",
|
|
.of_match = "vneg",
|
|
.id = LM36274_LDO_NEG,
|
|
.ops = &lm363x_regulator_voltage_table_ops,
|
|
.n_voltages = LM36274_LDO_VSEL_MAX + 1,
|
|
.min_uV = LM36274_VOLTAGE_MIN,
|
|
.uV_step = LM363X_STEP_50mV,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.owner = THIS_MODULE,
|
|
.vsel_reg = LM36274_REG_VOUT_NEG,
|
|
.vsel_mask = LM36274_VOUT_MASK,
|
|
.enable_reg = LM36274_REG_BIAS_CONFIG_1,
|
|
.enable_mask = LM36274_EN_VNEG_MASK,
|
|
},
|
|
};
|
|
|
|
static struct gpio_desc *lm363x_regulator_of_get_enable_gpio(struct device *dev, int id)
|
|
{
|
|
/*
|
|
* Check LCM_EN1/2_GPIO is configured.
|
|
* Those pins are used for enabling VPOS/VNEG LDOs.
|
|
* Do not use devm* here: the regulator core takes over the
|
|
* lifecycle management of the GPIO descriptor.
|
|
*/
|
|
switch (id) {
|
|
case LM3632_LDO_POS:
|
|
case LM36274_LDO_POS:
|
|
return gpiod_get_index_optional(dev, "enable", 0,
|
|
GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
|
|
case LM3632_LDO_NEG:
|
|
case LM36274_LDO_NEG:
|
|
return gpiod_get_index_optional(dev, "enable", 1,
|
|
GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
|
|
default:
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
static int lm363x_regulator_set_ext_en(struct regmap *regmap, int id)
|
|
{
|
|
int ext_en_mask = 0;
|
|
|
|
switch (id) {
|
|
case LM3632_LDO_POS:
|
|
case LM3632_LDO_NEG:
|
|
ext_en_mask = LM3632_EXT_EN_MASK;
|
|
break;
|
|
case LM36274_LDO_POS:
|
|
case LM36274_LDO_NEG:
|
|
ext_en_mask = LM36274_EXT_EN_MASK;
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
return regmap_update_bits(regmap, lm363x_regulator_desc[id].enable_reg,
|
|
ext_en_mask, ext_en_mask);
|
|
}
|
|
|
|
static int lm363x_regulator_probe(struct platform_device *pdev)
|
|
{
|
|
struct ti_lmu *lmu = dev_get_drvdata(pdev->dev.parent);
|
|
struct regmap *regmap = lmu->regmap;
|
|
struct regulator_config cfg = { };
|
|
struct regulator_dev *rdev;
|
|
struct device *dev = &pdev->dev;
|
|
int id = pdev->id;
|
|
struct gpio_desc *gpiod;
|
|
int ret;
|
|
|
|
cfg.dev = dev;
|
|
cfg.regmap = regmap;
|
|
|
|
/*
|
|
* LM3632 LDOs can be controlled by external pin.
|
|
* Register update is required if the pin is used.
|
|
*/
|
|
gpiod = lm363x_regulator_of_get_enable_gpio(dev, id);
|
|
if (IS_ERR(gpiod))
|
|
return PTR_ERR(gpiod);
|
|
|
|
if (gpiod) {
|
|
cfg.ena_gpiod = gpiod;
|
|
ret = lm363x_regulator_set_ext_en(regmap, id);
|
|
if (ret) {
|
|
gpiod_put(gpiod);
|
|
dev_err(dev, "External pin err: %d\n", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
rdev = devm_regulator_register(dev, &lm363x_regulator_desc[id], &cfg);
|
|
if (IS_ERR(rdev)) {
|
|
ret = PTR_ERR(rdev);
|
|
dev_err(dev, "[%d] regulator register err: %d\n", id, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver lm363x_regulator_driver = {
|
|
.probe = lm363x_regulator_probe,
|
|
.driver = {
|
|
.name = "lm363x-regulator",
|
|
},
|
|
};
|
|
|
|
module_platform_driver(lm363x_regulator_driver);
|
|
|
|
MODULE_DESCRIPTION("TI LM363X Regulator Driver");
|
|
MODULE_AUTHOR("Milo Kim");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:lm363x-regulator");
|