mirror of
https://github.com/torvalds/linux.git
synced 2024-12-05 10:32:35 +00:00
7eac3bd38d
The Sapphire Rapids (SPR) C6 optimization was added to the end of the
'spr_idle_state_table_update()' function. However, the function has a
'return' which may happen before the optimization has a chance to run.
And this may prevent the optimization from happening.
This is an unlikely scenario, but possible if user boots with, say,
the 'intel_idle.preferred_cstates=6' kernel boot option.
This patch fixes the issue by eliminating the problematic 'return'
statement.
Fixes: 3a9cf77b60
("intel_idle: add core C6 optimization for SPR")
Suggested-by: Jan Beulich <jbeulich@suse.com>
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
[ rjw: Minor changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
1909 lines
50 KiB
C
1909 lines
50 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* intel_idle.c - native hardware idle loop for modern Intel processors
|
|
*
|
|
* Copyright (c) 2013 - 2020, Intel Corporation.
|
|
* Len Brown <len.brown@intel.com>
|
|
* Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
*/
|
|
|
|
/*
|
|
* intel_idle is a cpuidle driver that loads on all Intel CPUs with MWAIT
|
|
* in lieu of the legacy ACPI processor_idle driver. The intent is to
|
|
* make Linux more efficient on these processors, as intel_idle knows
|
|
* more than ACPI, as well as make Linux more immune to ACPI BIOS bugs.
|
|
*/
|
|
|
|
/*
|
|
* Design Assumptions
|
|
*
|
|
* All CPUs have same idle states as boot CPU
|
|
*
|
|
* Chipset BM_STS (bus master status) bit is a NOP
|
|
* for preventing entry into deep C-states
|
|
*
|
|
* CPU will flush caches as needed when entering a C-state via MWAIT
|
|
* (in contrast to entering ACPI C3, in which case the WBINVD
|
|
* instruction needs to be executed to flush the caches)
|
|
*/
|
|
|
|
/*
|
|
* Known limitations
|
|
*
|
|
* ACPI has a .suspend hack to turn off deep c-statees during suspend
|
|
* to avoid complications with the lapic timer workaround.
|
|
* Have not seen issues with suspend, but may need same workaround here.
|
|
*
|
|
*/
|
|
|
|
/* un-comment DEBUG to enable pr_debug() statements */
|
|
/* #define DEBUG */
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/cpuidle.h>
|
|
#include <linux/tick.h>
|
|
#include <trace/events/power.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <asm/cpu_device_id.h>
|
|
#include <asm/intel-family.h>
|
|
#include <asm/mwait.h>
|
|
#include <asm/msr.h>
|
|
|
|
#define INTEL_IDLE_VERSION "0.5.1"
|
|
|
|
static struct cpuidle_driver intel_idle_driver = {
|
|
.name = "intel_idle",
|
|
.owner = THIS_MODULE,
|
|
};
|
|
/* intel_idle.max_cstate=0 disables driver */
|
|
static int max_cstate = CPUIDLE_STATE_MAX - 1;
|
|
static unsigned int disabled_states_mask;
|
|
static unsigned int preferred_states_mask;
|
|
|
|
static struct cpuidle_device __percpu *intel_idle_cpuidle_devices;
|
|
|
|
static unsigned long auto_demotion_disable_flags;
|
|
|
|
static enum {
|
|
C1E_PROMOTION_PRESERVE,
|
|
C1E_PROMOTION_ENABLE,
|
|
C1E_PROMOTION_DISABLE
|
|
} c1e_promotion = C1E_PROMOTION_PRESERVE;
|
|
|
|
struct idle_cpu {
|
|
struct cpuidle_state *state_table;
|
|
|
|
/*
|
|
* Hardware C-state auto-demotion may not always be optimal.
|
|
* Indicate which enable bits to clear here.
|
|
*/
|
|
unsigned long auto_demotion_disable_flags;
|
|
bool byt_auto_demotion_disable_flag;
|
|
bool disable_promotion_to_c1e;
|
|
bool use_acpi;
|
|
};
|
|
|
|
static const struct idle_cpu *icpu __initdata;
|
|
static struct cpuidle_state *cpuidle_state_table __initdata;
|
|
|
|
static unsigned int mwait_substates __initdata;
|
|
|
|
/*
|
|
* Enable interrupts before entering the C-state. On some platforms and for
|
|
* some C-states, this may measurably decrease interrupt latency.
|
|
*/
|
|
#define CPUIDLE_FLAG_IRQ_ENABLE BIT(14)
|
|
|
|
/*
|
|
* Enable this state by default even if the ACPI _CST does not list it.
|
|
*/
|
|
#define CPUIDLE_FLAG_ALWAYS_ENABLE BIT(15)
|
|
|
|
/*
|
|
* MWAIT takes an 8-bit "hint" in EAX "suggesting"
|
|
* the C-state (top nibble) and sub-state (bottom nibble)
|
|
* 0x00 means "MWAIT(C1)", 0x10 means "MWAIT(C2)" etc.
|
|
*
|
|
* We store the hint at the top of our "flags" for each state.
|
|
*/
|
|
#define flg2MWAIT(flags) (((flags) >> 24) & 0xFF)
|
|
#define MWAIT2flg(eax) ((eax & 0xFF) << 24)
|
|
|
|
/**
|
|
* intel_idle - Ask the processor to enter the given idle state.
|
|
* @dev: cpuidle device of the target CPU.
|
|
* @drv: cpuidle driver (assumed to point to intel_idle_driver).
|
|
* @index: Target idle state index.
|
|
*
|
|
* Use the MWAIT instruction to notify the processor that the CPU represented by
|
|
* @dev is idle and it can try to enter the idle state corresponding to @index.
|
|
*
|
|
* If the local APIC timer is not known to be reliable in the target idle state,
|
|
* enable one-shot tick broadcasting for the target CPU before executing MWAIT.
|
|
*
|
|
* Must be called under local_irq_disable().
|
|
*/
|
|
static __cpuidle int intel_idle(struct cpuidle_device *dev,
|
|
struct cpuidle_driver *drv, int index)
|
|
{
|
|
struct cpuidle_state *state = &drv->states[index];
|
|
unsigned long eax = flg2MWAIT(state->flags);
|
|
unsigned long ecx = 1; /* break on interrupt flag */
|
|
|
|
if (state->flags & CPUIDLE_FLAG_IRQ_ENABLE)
|
|
local_irq_enable();
|
|
|
|
mwait_idle_with_hints(eax, ecx);
|
|
|
|
return index;
|
|
}
|
|
|
|
/**
|
|
* intel_idle_s2idle - Ask the processor to enter the given idle state.
|
|
* @dev: cpuidle device of the target CPU.
|
|
* @drv: cpuidle driver (assumed to point to intel_idle_driver).
|
|
* @index: Target idle state index.
|
|
*
|
|
* Use the MWAIT instruction to notify the processor that the CPU represented by
|
|
* @dev is idle and it can try to enter the idle state corresponding to @index.
|
|
*
|
|
* Invoked as a suspend-to-idle callback routine with frozen user space, frozen
|
|
* scheduler tick and suspended scheduler clock on the target CPU.
|
|
*/
|
|
static __cpuidle int intel_idle_s2idle(struct cpuidle_device *dev,
|
|
struct cpuidle_driver *drv, int index)
|
|
{
|
|
unsigned long eax = flg2MWAIT(drv->states[index].flags);
|
|
unsigned long ecx = 1; /* break on interrupt flag */
|
|
|
|
mwait_idle_with_hints(eax, ecx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* States are indexed by the cstate number,
|
|
* which is also the index into the MWAIT hint array.
|
|
* Thus C0 is a dummy.
|
|
*/
|
|
static struct cpuidle_state nehalem_cstates[] __initdata = {
|
|
{
|
|
.name = "C1",
|
|
.desc = "MWAIT 0x00",
|
|
.flags = MWAIT2flg(0x00),
|
|
.exit_latency = 3,
|
|
.target_residency = 6,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C1E",
|
|
.desc = "MWAIT 0x01",
|
|
.flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_ALWAYS_ENABLE,
|
|
.exit_latency = 10,
|
|
.target_residency = 20,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C3",
|
|
.desc = "MWAIT 0x10",
|
|
.flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 20,
|
|
.target_residency = 80,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6",
|
|
.desc = "MWAIT 0x20",
|
|
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 200,
|
|
.target_residency = 800,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.enter = NULL }
|
|
};
|
|
|
|
static struct cpuidle_state snb_cstates[] __initdata = {
|
|
{
|
|
.name = "C1",
|
|
.desc = "MWAIT 0x00",
|
|
.flags = MWAIT2flg(0x00),
|
|
.exit_latency = 2,
|
|
.target_residency = 2,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C1E",
|
|
.desc = "MWAIT 0x01",
|
|
.flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_ALWAYS_ENABLE,
|
|
.exit_latency = 10,
|
|
.target_residency = 20,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C3",
|
|
.desc = "MWAIT 0x10",
|
|
.flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 80,
|
|
.target_residency = 211,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6",
|
|
.desc = "MWAIT 0x20",
|
|
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 104,
|
|
.target_residency = 345,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C7",
|
|
.desc = "MWAIT 0x30",
|
|
.flags = MWAIT2flg(0x30) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 109,
|
|
.target_residency = 345,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.enter = NULL }
|
|
};
|
|
|
|
static struct cpuidle_state byt_cstates[] __initdata = {
|
|
{
|
|
.name = "C1",
|
|
.desc = "MWAIT 0x00",
|
|
.flags = MWAIT2flg(0x00),
|
|
.exit_latency = 1,
|
|
.target_residency = 1,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6N",
|
|
.desc = "MWAIT 0x58",
|
|
.flags = MWAIT2flg(0x58) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 300,
|
|
.target_residency = 275,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6S",
|
|
.desc = "MWAIT 0x52",
|
|
.flags = MWAIT2flg(0x52) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 500,
|
|
.target_residency = 560,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C7",
|
|
.desc = "MWAIT 0x60",
|
|
.flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 1200,
|
|
.target_residency = 4000,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C7S",
|
|
.desc = "MWAIT 0x64",
|
|
.flags = MWAIT2flg(0x64) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 10000,
|
|
.target_residency = 20000,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.enter = NULL }
|
|
};
|
|
|
|
static struct cpuidle_state cht_cstates[] __initdata = {
|
|
{
|
|
.name = "C1",
|
|
.desc = "MWAIT 0x00",
|
|
.flags = MWAIT2flg(0x00),
|
|
.exit_latency = 1,
|
|
.target_residency = 1,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6N",
|
|
.desc = "MWAIT 0x58",
|
|
.flags = MWAIT2flg(0x58) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 80,
|
|
.target_residency = 275,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6S",
|
|
.desc = "MWAIT 0x52",
|
|
.flags = MWAIT2flg(0x52) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 200,
|
|
.target_residency = 560,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C7",
|
|
.desc = "MWAIT 0x60",
|
|
.flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 1200,
|
|
.target_residency = 4000,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C7S",
|
|
.desc = "MWAIT 0x64",
|
|
.flags = MWAIT2flg(0x64) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 10000,
|
|
.target_residency = 20000,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.enter = NULL }
|
|
};
|
|
|
|
static struct cpuidle_state ivb_cstates[] __initdata = {
|
|
{
|
|
.name = "C1",
|
|
.desc = "MWAIT 0x00",
|
|
.flags = MWAIT2flg(0x00),
|
|
.exit_latency = 1,
|
|
.target_residency = 1,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C1E",
|
|
.desc = "MWAIT 0x01",
|
|
.flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_ALWAYS_ENABLE,
|
|
.exit_latency = 10,
|
|
.target_residency = 20,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C3",
|
|
.desc = "MWAIT 0x10",
|
|
.flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 59,
|
|
.target_residency = 156,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6",
|
|
.desc = "MWAIT 0x20",
|
|
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 80,
|
|
.target_residency = 300,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C7",
|
|
.desc = "MWAIT 0x30",
|
|
.flags = MWAIT2flg(0x30) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 87,
|
|
.target_residency = 300,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.enter = NULL }
|
|
};
|
|
|
|
static struct cpuidle_state ivt_cstates[] __initdata = {
|
|
{
|
|
.name = "C1",
|
|
.desc = "MWAIT 0x00",
|
|
.flags = MWAIT2flg(0x00),
|
|
.exit_latency = 1,
|
|
.target_residency = 1,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C1E",
|
|
.desc = "MWAIT 0x01",
|
|
.flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_ALWAYS_ENABLE,
|
|
.exit_latency = 10,
|
|
.target_residency = 80,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C3",
|
|
.desc = "MWAIT 0x10",
|
|
.flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 59,
|
|
.target_residency = 156,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6",
|
|
.desc = "MWAIT 0x20",
|
|
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 82,
|
|
.target_residency = 300,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.enter = NULL }
|
|
};
|
|
|
|
static struct cpuidle_state ivt_cstates_4s[] __initdata = {
|
|
{
|
|
.name = "C1",
|
|
.desc = "MWAIT 0x00",
|
|
.flags = MWAIT2flg(0x00),
|
|
.exit_latency = 1,
|
|
.target_residency = 1,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C1E",
|
|
.desc = "MWAIT 0x01",
|
|
.flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_ALWAYS_ENABLE,
|
|
.exit_latency = 10,
|
|
.target_residency = 250,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C3",
|
|
.desc = "MWAIT 0x10",
|
|
.flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 59,
|
|
.target_residency = 300,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6",
|
|
.desc = "MWAIT 0x20",
|
|
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 84,
|
|
.target_residency = 400,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.enter = NULL }
|
|
};
|
|
|
|
static struct cpuidle_state ivt_cstates_8s[] __initdata = {
|
|
{
|
|
.name = "C1",
|
|
.desc = "MWAIT 0x00",
|
|
.flags = MWAIT2flg(0x00),
|
|
.exit_latency = 1,
|
|
.target_residency = 1,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C1E",
|
|
.desc = "MWAIT 0x01",
|
|
.flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_ALWAYS_ENABLE,
|
|
.exit_latency = 10,
|
|
.target_residency = 500,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C3",
|
|
.desc = "MWAIT 0x10",
|
|
.flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 59,
|
|
.target_residency = 600,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6",
|
|
.desc = "MWAIT 0x20",
|
|
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 88,
|
|
.target_residency = 700,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.enter = NULL }
|
|
};
|
|
|
|
static struct cpuidle_state hsw_cstates[] __initdata = {
|
|
{
|
|
.name = "C1",
|
|
.desc = "MWAIT 0x00",
|
|
.flags = MWAIT2flg(0x00),
|
|
.exit_latency = 2,
|
|
.target_residency = 2,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C1E",
|
|
.desc = "MWAIT 0x01",
|
|
.flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_ALWAYS_ENABLE,
|
|
.exit_latency = 10,
|
|
.target_residency = 20,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C3",
|
|
.desc = "MWAIT 0x10",
|
|
.flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 33,
|
|
.target_residency = 100,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6",
|
|
.desc = "MWAIT 0x20",
|
|
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 133,
|
|
.target_residency = 400,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C7s",
|
|
.desc = "MWAIT 0x32",
|
|
.flags = MWAIT2flg(0x32) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 166,
|
|
.target_residency = 500,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C8",
|
|
.desc = "MWAIT 0x40",
|
|
.flags = MWAIT2flg(0x40) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 300,
|
|
.target_residency = 900,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C9",
|
|
.desc = "MWAIT 0x50",
|
|
.flags = MWAIT2flg(0x50) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 600,
|
|
.target_residency = 1800,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C10",
|
|
.desc = "MWAIT 0x60",
|
|
.flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 2600,
|
|
.target_residency = 7700,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.enter = NULL }
|
|
};
|
|
static struct cpuidle_state bdw_cstates[] __initdata = {
|
|
{
|
|
.name = "C1",
|
|
.desc = "MWAIT 0x00",
|
|
.flags = MWAIT2flg(0x00),
|
|
.exit_latency = 2,
|
|
.target_residency = 2,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C1E",
|
|
.desc = "MWAIT 0x01",
|
|
.flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_ALWAYS_ENABLE,
|
|
.exit_latency = 10,
|
|
.target_residency = 20,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C3",
|
|
.desc = "MWAIT 0x10",
|
|
.flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 40,
|
|
.target_residency = 100,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6",
|
|
.desc = "MWAIT 0x20",
|
|
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 133,
|
|
.target_residency = 400,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C7s",
|
|
.desc = "MWAIT 0x32",
|
|
.flags = MWAIT2flg(0x32) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 166,
|
|
.target_residency = 500,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C8",
|
|
.desc = "MWAIT 0x40",
|
|
.flags = MWAIT2flg(0x40) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 300,
|
|
.target_residency = 900,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C9",
|
|
.desc = "MWAIT 0x50",
|
|
.flags = MWAIT2flg(0x50) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 600,
|
|
.target_residency = 1800,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C10",
|
|
.desc = "MWAIT 0x60",
|
|
.flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 2600,
|
|
.target_residency = 7700,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.enter = NULL }
|
|
};
|
|
|
|
static struct cpuidle_state skl_cstates[] __initdata = {
|
|
{
|
|
.name = "C1",
|
|
.desc = "MWAIT 0x00",
|
|
.flags = MWAIT2flg(0x00),
|
|
.exit_latency = 2,
|
|
.target_residency = 2,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C1E",
|
|
.desc = "MWAIT 0x01",
|
|
.flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_ALWAYS_ENABLE,
|
|
.exit_latency = 10,
|
|
.target_residency = 20,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C3",
|
|
.desc = "MWAIT 0x10",
|
|
.flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 70,
|
|
.target_residency = 100,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6",
|
|
.desc = "MWAIT 0x20",
|
|
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 85,
|
|
.target_residency = 200,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C7s",
|
|
.desc = "MWAIT 0x33",
|
|
.flags = MWAIT2flg(0x33) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 124,
|
|
.target_residency = 800,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C8",
|
|
.desc = "MWAIT 0x40",
|
|
.flags = MWAIT2flg(0x40) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 200,
|
|
.target_residency = 800,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C9",
|
|
.desc = "MWAIT 0x50",
|
|
.flags = MWAIT2flg(0x50) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 480,
|
|
.target_residency = 5000,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C10",
|
|
.desc = "MWAIT 0x60",
|
|
.flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 890,
|
|
.target_residency = 5000,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.enter = NULL }
|
|
};
|
|
|
|
static struct cpuidle_state skx_cstates[] __initdata = {
|
|
{
|
|
.name = "C1",
|
|
.desc = "MWAIT 0x00",
|
|
.flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_IRQ_ENABLE,
|
|
.exit_latency = 2,
|
|
.target_residency = 2,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C1E",
|
|
.desc = "MWAIT 0x01",
|
|
.flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_ALWAYS_ENABLE,
|
|
.exit_latency = 10,
|
|
.target_residency = 20,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6",
|
|
.desc = "MWAIT 0x20",
|
|
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 133,
|
|
.target_residency = 600,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.enter = NULL }
|
|
};
|
|
|
|
static struct cpuidle_state icx_cstates[] __initdata = {
|
|
{
|
|
.name = "C1",
|
|
.desc = "MWAIT 0x00",
|
|
.flags = MWAIT2flg(0x00) | CPUIDLE_FLAG_IRQ_ENABLE,
|
|
.exit_latency = 1,
|
|
.target_residency = 1,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C1E",
|
|
.desc = "MWAIT 0x01",
|
|
.flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_ALWAYS_ENABLE,
|
|
.exit_latency = 4,
|
|
.target_residency = 4,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6",
|
|
.desc = "MWAIT 0x20",
|
|
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 170,
|
|
.target_residency = 600,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.enter = NULL }
|
|
};
|
|
|
|
/*
|
|
* On Sapphire Rapids Xeon C1 has to be disabled if C1E is enabled, and vice
|
|
* versa. On SPR C1E is enabled only if "C1E promotion" bit is set in
|
|
* MSR_IA32_POWER_CTL. But in this case there effectively no C1, because C1
|
|
* requests are promoted to C1E. If the "C1E promotion" bit is cleared, then
|
|
* both C1 and C1E requests end up with C1, so there is effectively no C1E.
|
|
*
|
|
* By default we enable C1 and disable C1E by marking it with
|
|
* 'CPUIDLE_FLAG_UNUSABLE'.
|
|
*/
|
|
static struct cpuidle_state spr_cstates[] __initdata = {
|
|
{
|
|
.name = "C1",
|
|
.desc = "MWAIT 0x00",
|
|
.flags = MWAIT2flg(0x00),
|
|
.exit_latency = 1,
|
|
.target_residency = 1,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C1E",
|
|
.desc = "MWAIT 0x01",
|
|
.flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_ALWAYS_ENABLE |
|
|
CPUIDLE_FLAG_UNUSABLE,
|
|
.exit_latency = 2,
|
|
.target_residency = 4,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6",
|
|
.desc = "MWAIT 0x20",
|
|
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 290,
|
|
.target_residency = 800,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.enter = NULL }
|
|
};
|
|
|
|
static struct cpuidle_state atom_cstates[] __initdata = {
|
|
{
|
|
.name = "C1E",
|
|
.desc = "MWAIT 0x00",
|
|
.flags = MWAIT2flg(0x00),
|
|
.exit_latency = 10,
|
|
.target_residency = 20,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C2",
|
|
.desc = "MWAIT 0x10",
|
|
.flags = MWAIT2flg(0x10),
|
|
.exit_latency = 20,
|
|
.target_residency = 80,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C4",
|
|
.desc = "MWAIT 0x30",
|
|
.flags = MWAIT2flg(0x30) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 100,
|
|
.target_residency = 400,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6",
|
|
.desc = "MWAIT 0x52",
|
|
.flags = MWAIT2flg(0x52) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 140,
|
|
.target_residency = 560,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.enter = NULL }
|
|
};
|
|
static struct cpuidle_state tangier_cstates[] __initdata = {
|
|
{
|
|
.name = "C1",
|
|
.desc = "MWAIT 0x00",
|
|
.flags = MWAIT2flg(0x00),
|
|
.exit_latency = 1,
|
|
.target_residency = 4,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C4",
|
|
.desc = "MWAIT 0x30",
|
|
.flags = MWAIT2flg(0x30) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 100,
|
|
.target_residency = 400,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6",
|
|
.desc = "MWAIT 0x52",
|
|
.flags = MWAIT2flg(0x52) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 140,
|
|
.target_residency = 560,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C7",
|
|
.desc = "MWAIT 0x60",
|
|
.flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 1200,
|
|
.target_residency = 4000,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C9",
|
|
.desc = "MWAIT 0x64",
|
|
.flags = MWAIT2flg(0x64) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 10000,
|
|
.target_residency = 20000,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.enter = NULL }
|
|
};
|
|
static struct cpuidle_state avn_cstates[] __initdata = {
|
|
{
|
|
.name = "C1",
|
|
.desc = "MWAIT 0x00",
|
|
.flags = MWAIT2flg(0x00),
|
|
.exit_latency = 2,
|
|
.target_residency = 2,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6",
|
|
.desc = "MWAIT 0x51",
|
|
.flags = MWAIT2flg(0x51) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 15,
|
|
.target_residency = 45,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.enter = NULL }
|
|
};
|
|
static struct cpuidle_state knl_cstates[] __initdata = {
|
|
{
|
|
.name = "C1",
|
|
.desc = "MWAIT 0x00",
|
|
.flags = MWAIT2flg(0x00),
|
|
.exit_latency = 1,
|
|
.target_residency = 2,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle },
|
|
{
|
|
.name = "C6",
|
|
.desc = "MWAIT 0x10",
|
|
.flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 120,
|
|
.target_residency = 500,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle },
|
|
{
|
|
.enter = NULL }
|
|
};
|
|
|
|
static struct cpuidle_state bxt_cstates[] __initdata = {
|
|
{
|
|
.name = "C1",
|
|
.desc = "MWAIT 0x00",
|
|
.flags = MWAIT2flg(0x00),
|
|
.exit_latency = 2,
|
|
.target_residency = 2,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C1E",
|
|
.desc = "MWAIT 0x01",
|
|
.flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_ALWAYS_ENABLE,
|
|
.exit_latency = 10,
|
|
.target_residency = 20,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6",
|
|
.desc = "MWAIT 0x20",
|
|
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 133,
|
|
.target_residency = 133,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C7s",
|
|
.desc = "MWAIT 0x31",
|
|
.flags = MWAIT2flg(0x31) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 155,
|
|
.target_residency = 155,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C8",
|
|
.desc = "MWAIT 0x40",
|
|
.flags = MWAIT2flg(0x40) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 1000,
|
|
.target_residency = 1000,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C9",
|
|
.desc = "MWAIT 0x50",
|
|
.flags = MWAIT2flg(0x50) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 2000,
|
|
.target_residency = 2000,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C10",
|
|
.desc = "MWAIT 0x60",
|
|
.flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 10000,
|
|
.target_residency = 10000,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.enter = NULL }
|
|
};
|
|
|
|
static struct cpuidle_state dnv_cstates[] __initdata = {
|
|
{
|
|
.name = "C1",
|
|
.desc = "MWAIT 0x00",
|
|
.flags = MWAIT2flg(0x00),
|
|
.exit_latency = 2,
|
|
.target_residency = 2,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C1E",
|
|
.desc = "MWAIT 0x01",
|
|
.flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_ALWAYS_ENABLE,
|
|
.exit_latency = 10,
|
|
.target_residency = 20,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6",
|
|
.desc = "MWAIT 0x20",
|
|
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 50,
|
|
.target_residency = 500,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.enter = NULL }
|
|
};
|
|
|
|
/*
|
|
* Note, depending on HW and FW revision, SnowRidge SoC may or may not support
|
|
* C6, and this is indicated in the CPUID mwait leaf.
|
|
*/
|
|
static struct cpuidle_state snr_cstates[] __initdata = {
|
|
{
|
|
.name = "C1",
|
|
.desc = "MWAIT 0x00",
|
|
.flags = MWAIT2flg(0x00),
|
|
.exit_latency = 2,
|
|
.target_residency = 2,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C1E",
|
|
.desc = "MWAIT 0x01",
|
|
.flags = MWAIT2flg(0x01) | CPUIDLE_FLAG_ALWAYS_ENABLE,
|
|
.exit_latency = 15,
|
|
.target_residency = 25,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.name = "C6",
|
|
.desc = "MWAIT 0x20",
|
|
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
|
|
.exit_latency = 130,
|
|
.target_residency = 500,
|
|
.enter = &intel_idle,
|
|
.enter_s2idle = intel_idle_s2idle, },
|
|
{
|
|
.enter = NULL }
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_nehalem __initconst = {
|
|
.state_table = nehalem_cstates,
|
|
.auto_demotion_disable_flags = NHM_C1_AUTO_DEMOTE | NHM_C3_AUTO_DEMOTE,
|
|
.disable_promotion_to_c1e = true,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_nhx __initconst = {
|
|
.state_table = nehalem_cstates,
|
|
.auto_demotion_disable_flags = NHM_C1_AUTO_DEMOTE | NHM_C3_AUTO_DEMOTE,
|
|
.disable_promotion_to_c1e = true,
|
|
.use_acpi = true,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_atom __initconst = {
|
|
.state_table = atom_cstates,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_tangier __initconst = {
|
|
.state_table = tangier_cstates,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_lincroft __initconst = {
|
|
.state_table = atom_cstates,
|
|
.auto_demotion_disable_flags = ATM_LNC_C6_AUTO_DEMOTE,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_snb __initconst = {
|
|
.state_table = snb_cstates,
|
|
.disable_promotion_to_c1e = true,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_snx __initconst = {
|
|
.state_table = snb_cstates,
|
|
.disable_promotion_to_c1e = true,
|
|
.use_acpi = true,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_byt __initconst = {
|
|
.state_table = byt_cstates,
|
|
.disable_promotion_to_c1e = true,
|
|
.byt_auto_demotion_disable_flag = true,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_cht __initconst = {
|
|
.state_table = cht_cstates,
|
|
.disable_promotion_to_c1e = true,
|
|
.byt_auto_demotion_disable_flag = true,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_ivb __initconst = {
|
|
.state_table = ivb_cstates,
|
|
.disable_promotion_to_c1e = true,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_ivt __initconst = {
|
|
.state_table = ivt_cstates,
|
|
.disable_promotion_to_c1e = true,
|
|
.use_acpi = true,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_hsw __initconst = {
|
|
.state_table = hsw_cstates,
|
|
.disable_promotion_to_c1e = true,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_hsx __initconst = {
|
|
.state_table = hsw_cstates,
|
|
.disable_promotion_to_c1e = true,
|
|
.use_acpi = true,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_bdw __initconst = {
|
|
.state_table = bdw_cstates,
|
|
.disable_promotion_to_c1e = true,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_bdx __initconst = {
|
|
.state_table = bdw_cstates,
|
|
.disable_promotion_to_c1e = true,
|
|
.use_acpi = true,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_skl __initconst = {
|
|
.state_table = skl_cstates,
|
|
.disable_promotion_to_c1e = true,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_skx __initconst = {
|
|
.state_table = skx_cstates,
|
|
.disable_promotion_to_c1e = true,
|
|
.use_acpi = true,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_icx __initconst = {
|
|
.state_table = icx_cstates,
|
|
.disable_promotion_to_c1e = true,
|
|
.use_acpi = true,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_spr __initconst = {
|
|
.state_table = spr_cstates,
|
|
.disable_promotion_to_c1e = true,
|
|
.use_acpi = true,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_avn __initconst = {
|
|
.state_table = avn_cstates,
|
|
.disable_promotion_to_c1e = true,
|
|
.use_acpi = true,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_knl __initconst = {
|
|
.state_table = knl_cstates,
|
|
.use_acpi = true,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_bxt __initconst = {
|
|
.state_table = bxt_cstates,
|
|
.disable_promotion_to_c1e = true,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_dnv __initconst = {
|
|
.state_table = dnv_cstates,
|
|
.disable_promotion_to_c1e = true,
|
|
.use_acpi = true,
|
|
};
|
|
|
|
static const struct idle_cpu idle_cpu_snr __initconst = {
|
|
.state_table = snr_cstates,
|
|
.disable_promotion_to_c1e = true,
|
|
.use_acpi = true,
|
|
};
|
|
|
|
static const struct x86_cpu_id intel_idle_ids[] __initconst = {
|
|
X86_MATCH_INTEL_FAM6_MODEL(NEHALEM_EP, &idle_cpu_nhx),
|
|
X86_MATCH_INTEL_FAM6_MODEL(NEHALEM, &idle_cpu_nehalem),
|
|
X86_MATCH_INTEL_FAM6_MODEL(NEHALEM_G, &idle_cpu_nehalem),
|
|
X86_MATCH_INTEL_FAM6_MODEL(WESTMERE, &idle_cpu_nehalem),
|
|
X86_MATCH_INTEL_FAM6_MODEL(WESTMERE_EP, &idle_cpu_nhx),
|
|
X86_MATCH_INTEL_FAM6_MODEL(NEHALEM_EX, &idle_cpu_nhx),
|
|
X86_MATCH_INTEL_FAM6_MODEL(ATOM_BONNELL, &idle_cpu_atom),
|
|
X86_MATCH_INTEL_FAM6_MODEL(ATOM_BONNELL_MID, &idle_cpu_lincroft),
|
|
X86_MATCH_INTEL_FAM6_MODEL(WESTMERE_EX, &idle_cpu_nhx),
|
|
X86_MATCH_INTEL_FAM6_MODEL(SANDYBRIDGE, &idle_cpu_snb),
|
|
X86_MATCH_INTEL_FAM6_MODEL(SANDYBRIDGE_X, &idle_cpu_snx),
|
|
X86_MATCH_INTEL_FAM6_MODEL(ATOM_SALTWELL, &idle_cpu_atom),
|
|
X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT, &idle_cpu_byt),
|
|
X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_MID, &idle_cpu_tangier),
|
|
X86_MATCH_INTEL_FAM6_MODEL(ATOM_AIRMONT, &idle_cpu_cht),
|
|
X86_MATCH_INTEL_FAM6_MODEL(IVYBRIDGE, &idle_cpu_ivb),
|
|
X86_MATCH_INTEL_FAM6_MODEL(IVYBRIDGE_X, &idle_cpu_ivt),
|
|
X86_MATCH_INTEL_FAM6_MODEL(HASWELL, &idle_cpu_hsw),
|
|
X86_MATCH_INTEL_FAM6_MODEL(HASWELL_X, &idle_cpu_hsx),
|
|
X86_MATCH_INTEL_FAM6_MODEL(HASWELL_L, &idle_cpu_hsw),
|
|
X86_MATCH_INTEL_FAM6_MODEL(HASWELL_G, &idle_cpu_hsw),
|
|
X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_D, &idle_cpu_avn),
|
|
X86_MATCH_INTEL_FAM6_MODEL(BROADWELL, &idle_cpu_bdw),
|
|
X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_G, &idle_cpu_bdw),
|
|
X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_X, &idle_cpu_bdx),
|
|
X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_D, &idle_cpu_bdx),
|
|
X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_L, &idle_cpu_skl),
|
|
X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE, &idle_cpu_skl),
|
|
X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE_L, &idle_cpu_skl),
|
|
X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE, &idle_cpu_skl),
|
|
X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_X, &idle_cpu_skx),
|
|
X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X, &idle_cpu_icx),
|
|
X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D, &idle_cpu_icx),
|
|
X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X, &idle_cpu_spr),
|
|
X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNL, &idle_cpu_knl),
|
|
X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNM, &idle_cpu_knl),
|
|
X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT, &idle_cpu_bxt),
|
|
X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_PLUS, &idle_cpu_bxt),
|
|
X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_D, &idle_cpu_dnv),
|
|
X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D, &idle_cpu_snr),
|
|
{}
|
|
};
|
|
|
|
static const struct x86_cpu_id intel_mwait_ids[] __initconst = {
|
|
X86_MATCH_VENDOR_FAM_FEATURE(INTEL, 6, X86_FEATURE_MWAIT, NULL),
|
|
{}
|
|
};
|
|
|
|
static bool __init intel_idle_max_cstate_reached(int cstate)
|
|
{
|
|
if (cstate + 1 > max_cstate) {
|
|
pr_info("max_cstate %d reached\n", max_cstate);
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
static bool __init intel_idle_state_needs_timer_stop(struct cpuidle_state *state)
|
|
{
|
|
unsigned long eax = flg2MWAIT(state->flags);
|
|
|
|
if (boot_cpu_has(X86_FEATURE_ARAT))
|
|
return false;
|
|
|
|
/*
|
|
* Switch over to one-shot tick broadcast if the target C-state
|
|
* is deeper than C1.
|
|
*/
|
|
return !!((eax >> MWAIT_SUBSTATE_SIZE) & MWAIT_CSTATE_MASK);
|
|
}
|
|
|
|
#ifdef CONFIG_ACPI_PROCESSOR_CSTATE
|
|
#include <acpi/processor.h>
|
|
|
|
static bool no_acpi __read_mostly;
|
|
module_param(no_acpi, bool, 0444);
|
|
MODULE_PARM_DESC(no_acpi, "Do not use ACPI _CST for building the idle states list");
|
|
|
|
static bool force_use_acpi __read_mostly; /* No effect if no_acpi is set. */
|
|
module_param_named(use_acpi, force_use_acpi, bool, 0444);
|
|
MODULE_PARM_DESC(use_acpi, "Use ACPI _CST for building the idle states list");
|
|
|
|
static struct acpi_processor_power acpi_state_table __initdata;
|
|
|
|
/**
|
|
* intel_idle_cst_usable - Check if the _CST information can be used.
|
|
*
|
|
* Check if all of the C-states listed by _CST in the max_cstate range are
|
|
* ACPI_CSTATE_FFH, which means that they should be entered via MWAIT.
|
|
*/
|
|
static bool __init intel_idle_cst_usable(void)
|
|
{
|
|
int cstate, limit;
|
|
|
|
limit = min_t(int, min_t(int, CPUIDLE_STATE_MAX, max_cstate + 1),
|
|
acpi_state_table.count);
|
|
|
|
for (cstate = 1; cstate < limit; cstate++) {
|
|
struct acpi_processor_cx *cx = &acpi_state_table.states[cstate];
|
|
|
|
if (cx->entry_method != ACPI_CSTATE_FFH)
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool __init intel_idle_acpi_cst_extract(void)
|
|
{
|
|
unsigned int cpu;
|
|
|
|
if (no_acpi) {
|
|
pr_debug("Not allowed to use ACPI _CST\n");
|
|
return false;
|
|
}
|
|
|
|
for_each_possible_cpu(cpu) {
|
|
struct acpi_processor *pr = per_cpu(processors, cpu);
|
|
|
|
if (!pr)
|
|
continue;
|
|
|
|
if (acpi_processor_evaluate_cst(pr->handle, cpu, &acpi_state_table))
|
|
continue;
|
|
|
|
acpi_state_table.count++;
|
|
|
|
if (!intel_idle_cst_usable())
|
|
continue;
|
|
|
|
if (!acpi_processor_claim_cst_control())
|
|
break;
|
|
|
|
return true;
|
|
}
|
|
|
|
acpi_state_table.count = 0;
|
|
pr_debug("ACPI _CST not found or not usable\n");
|
|
return false;
|
|
}
|
|
|
|
static void __init intel_idle_init_cstates_acpi(struct cpuidle_driver *drv)
|
|
{
|
|
int cstate, limit = min_t(int, CPUIDLE_STATE_MAX, acpi_state_table.count);
|
|
|
|
/*
|
|
* If limit > 0, intel_idle_cst_usable() has returned 'true', so all of
|
|
* the interesting states are ACPI_CSTATE_FFH.
|
|
*/
|
|
for (cstate = 1; cstate < limit; cstate++) {
|
|
struct acpi_processor_cx *cx;
|
|
struct cpuidle_state *state;
|
|
|
|
if (intel_idle_max_cstate_reached(cstate - 1))
|
|
break;
|
|
|
|
cx = &acpi_state_table.states[cstate];
|
|
|
|
state = &drv->states[drv->state_count++];
|
|
|
|
snprintf(state->name, CPUIDLE_NAME_LEN, "C%d_ACPI", cstate);
|
|
strlcpy(state->desc, cx->desc, CPUIDLE_DESC_LEN);
|
|
state->exit_latency = cx->latency;
|
|
/*
|
|
* For C1-type C-states use the same number for both the exit
|
|
* latency and target residency, because that is the case for
|
|
* C1 in the majority of the static C-states tables above.
|
|
* For the other types of C-states, however, set the target
|
|
* residency to 3 times the exit latency which should lead to
|
|
* a reasonable balance between energy-efficiency and
|
|
* performance in the majority of interesting cases.
|
|
*/
|
|
state->target_residency = cx->latency;
|
|
if (cx->type > ACPI_STATE_C1)
|
|
state->target_residency *= 3;
|
|
|
|
state->flags = MWAIT2flg(cx->address);
|
|
if (cx->type > ACPI_STATE_C2)
|
|
state->flags |= CPUIDLE_FLAG_TLB_FLUSHED;
|
|
|
|
if (disabled_states_mask & BIT(cstate))
|
|
state->flags |= CPUIDLE_FLAG_OFF;
|
|
|
|
if (intel_idle_state_needs_timer_stop(state))
|
|
state->flags |= CPUIDLE_FLAG_TIMER_STOP;
|
|
|
|
state->enter = intel_idle;
|
|
state->enter_s2idle = intel_idle_s2idle;
|
|
}
|
|
}
|
|
|
|
static bool __init intel_idle_off_by_default(u32 mwait_hint)
|
|
{
|
|
int cstate, limit;
|
|
|
|
/*
|
|
* If there are no _CST C-states, do not disable any C-states by
|
|
* default.
|
|
*/
|
|
if (!acpi_state_table.count)
|
|
return false;
|
|
|
|
limit = min_t(int, CPUIDLE_STATE_MAX, acpi_state_table.count);
|
|
/*
|
|
* If limit > 0, intel_idle_cst_usable() has returned 'true', so all of
|
|
* the interesting states are ACPI_CSTATE_FFH.
|
|
*/
|
|
for (cstate = 1; cstate < limit; cstate++) {
|
|
if (acpi_state_table.states[cstate].address == mwait_hint)
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
#else /* !CONFIG_ACPI_PROCESSOR_CSTATE */
|
|
#define force_use_acpi (false)
|
|
|
|
static inline bool intel_idle_acpi_cst_extract(void) { return false; }
|
|
static inline void intel_idle_init_cstates_acpi(struct cpuidle_driver *drv) { }
|
|
static inline bool intel_idle_off_by_default(u32 mwait_hint) { return false; }
|
|
#endif /* !CONFIG_ACPI_PROCESSOR_CSTATE */
|
|
|
|
/**
|
|
* ivt_idle_state_table_update - Tune the idle states table for Ivy Town.
|
|
*
|
|
* Tune IVT multi-socket targets.
|
|
* Assumption: num_sockets == (max_package_num + 1).
|
|
*/
|
|
static void __init ivt_idle_state_table_update(void)
|
|
{
|
|
/* IVT uses a different table for 1-2, 3-4, and > 4 sockets */
|
|
int cpu, package_num, num_sockets = 1;
|
|
|
|
for_each_online_cpu(cpu) {
|
|
package_num = topology_physical_package_id(cpu);
|
|
if (package_num + 1 > num_sockets) {
|
|
num_sockets = package_num + 1;
|
|
|
|
if (num_sockets > 4) {
|
|
cpuidle_state_table = ivt_cstates_8s;
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (num_sockets > 2)
|
|
cpuidle_state_table = ivt_cstates_4s;
|
|
|
|
/* else, 1 and 2 socket systems use default ivt_cstates */
|
|
}
|
|
|
|
/**
|
|
* irtl_2_usec - IRTL to microseconds conversion.
|
|
* @irtl: IRTL MSR value.
|
|
*
|
|
* Translate the IRTL (Interrupt Response Time Limit) MSR value to microseconds.
|
|
*/
|
|
static unsigned long long __init irtl_2_usec(unsigned long long irtl)
|
|
{
|
|
static const unsigned int irtl_ns_units[] __initconst = {
|
|
1, 32, 1024, 32768, 1048576, 33554432, 0, 0
|
|
};
|
|
unsigned long long ns;
|
|
|
|
if (!irtl)
|
|
return 0;
|
|
|
|
ns = irtl_ns_units[(irtl >> 10) & 0x7];
|
|
|
|
return div_u64((irtl & 0x3FF) * ns, NSEC_PER_USEC);
|
|
}
|
|
|
|
/**
|
|
* bxt_idle_state_table_update - Fix up the Broxton idle states table.
|
|
*
|
|
* On BXT, trust the IRTL (Interrupt Response Time Limit) MSR to show the
|
|
* definitive maximum latency and use the same value for target_residency.
|
|
*/
|
|
static void __init bxt_idle_state_table_update(void)
|
|
{
|
|
unsigned long long msr;
|
|
unsigned int usec;
|
|
|
|
rdmsrl(MSR_PKGC6_IRTL, msr);
|
|
usec = irtl_2_usec(msr);
|
|
if (usec) {
|
|
bxt_cstates[2].exit_latency = usec;
|
|
bxt_cstates[2].target_residency = usec;
|
|
}
|
|
|
|
rdmsrl(MSR_PKGC7_IRTL, msr);
|
|
usec = irtl_2_usec(msr);
|
|
if (usec) {
|
|
bxt_cstates[3].exit_latency = usec;
|
|
bxt_cstates[3].target_residency = usec;
|
|
}
|
|
|
|
rdmsrl(MSR_PKGC8_IRTL, msr);
|
|
usec = irtl_2_usec(msr);
|
|
if (usec) {
|
|
bxt_cstates[4].exit_latency = usec;
|
|
bxt_cstates[4].target_residency = usec;
|
|
}
|
|
|
|
rdmsrl(MSR_PKGC9_IRTL, msr);
|
|
usec = irtl_2_usec(msr);
|
|
if (usec) {
|
|
bxt_cstates[5].exit_latency = usec;
|
|
bxt_cstates[5].target_residency = usec;
|
|
}
|
|
|
|
rdmsrl(MSR_PKGC10_IRTL, msr);
|
|
usec = irtl_2_usec(msr);
|
|
if (usec) {
|
|
bxt_cstates[6].exit_latency = usec;
|
|
bxt_cstates[6].target_residency = usec;
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* sklh_idle_state_table_update - Fix up the Sky Lake idle states table.
|
|
*
|
|
* On SKL-H (model 0x5e) skip C8 and C9 if C10 is enabled and SGX disabled.
|
|
*/
|
|
static void __init sklh_idle_state_table_update(void)
|
|
{
|
|
unsigned long long msr;
|
|
unsigned int eax, ebx, ecx, edx;
|
|
|
|
|
|
/* if PC10 disabled via cmdline intel_idle.max_cstate=7 or shallower */
|
|
if (max_cstate <= 7)
|
|
return;
|
|
|
|
/* if PC10 not present in CPUID.MWAIT.EDX */
|
|
if ((mwait_substates & (0xF << 28)) == 0)
|
|
return;
|
|
|
|
rdmsrl(MSR_PKG_CST_CONFIG_CONTROL, msr);
|
|
|
|
/* PC10 is not enabled in PKG C-state limit */
|
|
if ((msr & 0xF) != 8)
|
|
return;
|
|
|
|
ecx = 0;
|
|
cpuid(7, &eax, &ebx, &ecx, &edx);
|
|
|
|
/* if SGX is present */
|
|
if (ebx & (1 << 2)) {
|
|
|
|
rdmsrl(MSR_IA32_FEAT_CTL, msr);
|
|
|
|
/* if SGX is enabled */
|
|
if (msr & (1 << 18))
|
|
return;
|
|
}
|
|
|
|
skl_cstates[5].flags |= CPUIDLE_FLAG_UNUSABLE; /* C8-SKL */
|
|
skl_cstates[6].flags |= CPUIDLE_FLAG_UNUSABLE; /* C9-SKL */
|
|
}
|
|
|
|
/**
|
|
* skx_idle_state_table_update - Adjust the Sky Lake/Cascade Lake
|
|
* idle states table.
|
|
*/
|
|
static void __init skx_idle_state_table_update(void)
|
|
{
|
|
unsigned long long msr;
|
|
|
|
rdmsrl(MSR_PKG_CST_CONFIG_CONTROL, msr);
|
|
|
|
/*
|
|
* 000b: C0/C1 (no package C-state support)
|
|
* 001b: C2
|
|
* 010b: C6 (non-retention)
|
|
* 011b: C6 (retention)
|
|
* 111b: No Package C state limits.
|
|
*/
|
|
if ((msr & 0x7) < 2) {
|
|
/*
|
|
* Uses the CC6 + PC0 latency and 3 times of
|
|
* latency for target_residency if the PC6
|
|
* is disabled in BIOS. This is consistent
|
|
* with how intel_idle driver uses _CST
|
|
* to set the target_residency.
|
|
*/
|
|
skx_cstates[2].exit_latency = 92;
|
|
skx_cstates[2].target_residency = 276;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* spr_idle_state_table_update - Adjust Sapphire Rapids idle states table.
|
|
*/
|
|
static void __init spr_idle_state_table_update(void)
|
|
{
|
|
unsigned long long msr;
|
|
|
|
/* Check if user prefers C1E over C1. */
|
|
if ((preferred_states_mask & BIT(2)) &&
|
|
!(preferred_states_mask & BIT(1))) {
|
|
/* Disable C1 and enable C1E. */
|
|
spr_cstates[0].flags |= CPUIDLE_FLAG_UNUSABLE;
|
|
spr_cstates[1].flags &= ~CPUIDLE_FLAG_UNUSABLE;
|
|
|
|
/* Enable C1E using the "C1E promotion" bit. */
|
|
c1e_promotion = C1E_PROMOTION_ENABLE;
|
|
}
|
|
|
|
/*
|
|
* By default, the C6 state assumes the worst-case scenario of package
|
|
* C6. However, if PC6 is disabled, we update the numbers to match
|
|
* core C6.
|
|
*/
|
|
rdmsrl(MSR_PKG_CST_CONFIG_CONTROL, msr);
|
|
|
|
/* Limit value 2 and above allow for PC6. */
|
|
if ((msr & 0x7) < 2) {
|
|
spr_cstates[2].exit_latency = 190;
|
|
spr_cstates[2].target_residency = 600;
|
|
}
|
|
}
|
|
|
|
static bool __init intel_idle_verify_cstate(unsigned int mwait_hint)
|
|
{
|
|
unsigned int mwait_cstate = MWAIT_HINT2CSTATE(mwait_hint) + 1;
|
|
unsigned int num_substates = (mwait_substates >> mwait_cstate * 4) &
|
|
MWAIT_SUBSTATE_MASK;
|
|
|
|
/* Ignore the C-state if there are NO sub-states in CPUID for it. */
|
|
if (num_substates == 0)
|
|
return false;
|
|
|
|
if (mwait_cstate > 2 && !boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
|
|
mark_tsc_unstable("TSC halts in idle states deeper than C2");
|
|
|
|
return true;
|
|
}
|
|
|
|
static void __init intel_idle_init_cstates_icpu(struct cpuidle_driver *drv)
|
|
{
|
|
int cstate;
|
|
|
|
switch (boot_cpu_data.x86_model) {
|
|
case INTEL_FAM6_IVYBRIDGE_X:
|
|
ivt_idle_state_table_update();
|
|
break;
|
|
case INTEL_FAM6_ATOM_GOLDMONT:
|
|
case INTEL_FAM6_ATOM_GOLDMONT_PLUS:
|
|
bxt_idle_state_table_update();
|
|
break;
|
|
case INTEL_FAM6_SKYLAKE:
|
|
sklh_idle_state_table_update();
|
|
break;
|
|
case INTEL_FAM6_SKYLAKE_X:
|
|
skx_idle_state_table_update();
|
|
break;
|
|
case INTEL_FAM6_SAPPHIRERAPIDS_X:
|
|
spr_idle_state_table_update();
|
|
break;
|
|
}
|
|
|
|
for (cstate = 0; cstate < CPUIDLE_STATE_MAX; ++cstate) {
|
|
unsigned int mwait_hint;
|
|
|
|
if (intel_idle_max_cstate_reached(cstate))
|
|
break;
|
|
|
|
if (!cpuidle_state_table[cstate].enter &&
|
|
!cpuidle_state_table[cstate].enter_s2idle)
|
|
break;
|
|
|
|
/* If marked as unusable, skip this state. */
|
|
if (cpuidle_state_table[cstate].flags & CPUIDLE_FLAG_UNUSABLE) {
|
|
pr_debug("state %s is disabled\n",
|
|
cpuidle_state_table[cstate].name);
|
|
continue;
|
|
}
|
|
|
|
mwait_hint = flg2MWAIT(cpuidle_state_table[cstate].flags);
|
|
if (!intel_idle_verify_cstate(mwait_hint))
|
|
continue;
|
|
|
|
/* Structure copy. */
|
|
drv->states[drv->state_count] = cpuidle_state_table[cstate];
|
|
|
|
if ((disabled_states_mask & BIT(drv->state_count)) ||
|
|
((icpu->use_acpi || force_use_acpi) &&
|
|
intel_idle_off_by_default(mwait_hint) &&
|
|
!(cpuidle_state_table[cstate].flags & CPUIDLE_FLAG_ALWAYS_ENABLE)))
|
|
drv->states[drv->state_count].flags |= CPUIDLE_FLAG_OFF;
|
|
|
|
if (intel_idle_state_needs_timer_stop(&drv->states[drv->state_count]))
|
|
drv->states[drv->state_count].flags |= CPUIDLE_FLAG_TIMER_STOP;
|
|
|
|
drv->state_count++;
|
|
}
|
|
|
|
if (icpu->byt_auto_demotion_disable_flag) {
|
|
wrmsrl(MSR_CC6_DEMOTION_POLICY_CONFIG, 0);
|
|
wrmsrl(MSR_MC6_DEMOTION_POLICY_CONFIG, 0);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* intel_idle_cpuidle_driver_init - Create the list of available idle states.
|
|
* @drv: cpuidle driver structure to initialize.
|
|
*/
|
|
static void __init intel_idle_cpuidle_driver_init(struct cpuidle_driver *drv)
|
|
{
|
|
cpuidle_poll_state_init(drv);
|
|
|
|
if (disabled_states_mask & BIT(0))
|
|
drv->states[0].flags |= CPUIDLE_FLAG_OFF;
|
|
|
|
drv->state_count = 1;
|
|
|
|
if (icpu)
|
|
intel_idle_init_cstates_icpu(drv);
|
|
else
|
|
intel_idle_init_cstates_acpi(drv);
|
|
}
|
|
|
|
static void auto_demotion_disable(void)
|
|
{
|
|
unsigned long long msr_bits;
|
|
|
|
rdmsrl(MSR_PKG_CST_CONFIG_CONTROL, msr_bits);
|
|
msr_bits &= ~auto_demotion_disable_flags;
|
|
wrmsrl(MSR_PKG_CST_CONFIG_CONTROL, msr_bits);
|
|
}
|
|
|
|
static void c1e_promotion_enable(void)
|
|
{
|
|
unsigned long long msr_bits;
|
|
|
|
rdmsrl(MSR_IA32_POWER_CTL, msr_bits);
|
|
msr_bits |= 0x2;
|
|
wrmsrl(MSR_IA32_POWER_CTL, msr_bits);
|
|
}
|
|
|
|
static void c1e_promotion_disable(void)
|
|
{
|
|
unsigned long long msr_bits;
|
|
|
|
rdmsrl(MSR_IA32_POWER_CTL, msr_bits);
|
|
msr_bits &= ~0x2;
|
|
wrmsrl(MSR_IA32_POWER_CTL, msr_bits);
|
|
}
|
|
|
|
/**
|
|
* intel_idle_cpu_init - Register the target CPU with the cpuidle core.
|
|
* @cpu: CPU to initialize.
|
|
*
|
|
* Register a cpuidle device object for @cpu and update its MSRs in accordance
|
|
* with the processor model flags.
|
|
*/
|
|
static int intel_idle_cpu_init(unsigned int cpu)
|
|
{
|
|
struct cpuidle_device *dev;
|
|
|
|
dev = per_cpu_ptr(intel_idle_cpuidle_devices, cpu);
|
|
dev->cpu = cpu;
|
|
|
|
if (cpuidle_register_device(dev)) {
|
|
pr_debug("cpuidle_register_device %d failed!\n", cpu);
|
|
return -EIO;
|
|
}
|
|
|
|
if (auto_demotion_disable_flags)
|
|
auto_demotion_disable();
|
|
|
|
if (c1e_promotion == C1E_PROMOTION_ENABLE)
|
|
c1e_promotion_enable();
|
|
else if (c1e_promotion == C1E_PROMOTION_DISABLE)
|
|
c1e_promotion_disable();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int intel_idle_cpu_online(unsigned int cpu)
|
|
{
|
|
struct cpuidle_device *dev;
|
|
|
|
if (!boot_cpu_has(X86_FEATURE_ARAT))
|
|
tick_broadcast_enable();
|
|
|
|
/*
|
|
* Some systems can hotplug a cpu at runtime after
|
|
* the kernel has booted, we have to initialize the
|
|
* driver in this case
|
|
*/
|
|
dev = per_cpu_ptr(intel_idle_cpuidle_devices, cpu);
|
|
if (!dev->registered)
|
|
return intel_idle_cpu_init(cpu);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* intel_idle_cpuidle_devices_uninit - Unregister all cpuidle devices.
|
|
*/
|
|
static void __init intel_idle_cpuidle_devices_uninit(void)
|
|
{
|
|
int i;
|
|
|
|
for_each_online_cpu(i)
|
|
cpuidle_unregister_device(per_cpu_ptr(intel_idle_cpuidle_devices, i));
|
|
}
|
|
|
|
static int __init intel_idle_init(void)
|
|
{
|
|
const struct x86_cpu_id *id;
|
|
unsigned int eax, ebx, ecx;
|
|
int retval;
|
|
|
|
/* Do not load intel_idle at all for now if idle= is passed */
|
|
if (boot_option_idle_override != IDLE_NO_OVERRIDE)
|
|
return -ENODEV;
|
|
|
|
if (max_cstate == 0) {
|
|
pr_debug("disabled\n");
|
|
return -EPERM;
|
|
}
|
|
|
|
id = x86_match_cpu(intel_idle_ids);
|
|
if (id) {
|
|
if (!boot_cpu_has(X86_FEATURE_MWAIT)) {
|
|
pr_debug("Please enable MWAIT in BIOS SETUP\n");
|
|
return -ENODEV;
|
|
}
|
|
} else {
|
|
id = x86_match_cpu(intel_mwait_ids);
|
|
if (!id)
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (boot_cpu_data.cpuid_level < CPUID_MWAIT_LEAF)
|
|
return -ENODEV;
|
|
|
|
cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &mwait_substates);
|
|
|
|
if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED) ||
|
|
!(ecx & CPUID5_ECX_INTERRUPT_BREAK) ||
|
|
!mwait_substates)
|
|
return -ENODEV;
|
|
|
|
pr_debug("MWAIT substates: 0x%x\n", mwait_substates);
|
|
|
|
icpu = (const struct idle_cpu *)id->driver_data;
|
|
if (icpu) {
|
|
cpuidle_state_table = icpu->state_table;
|
|
auto_demotion_disable_flags = icpu->auto_demotion_disable_flags;
|
|
if (icpu->disable_promotion_to_c1e)
|
|
c1e_promotion = C1E_PROMOTION_DISABLE;
|
|
if (icpu->use_acpi || force_use_acpi)
|
|
intel_idle_acpi_cst_extract();
|
|
} else if (!intel_idle_acpi_cst_extract()) {
|
|
return -ENODEV;
|
|
}
|
|
|
|
pr_debug("v" INTEL_IDLE_VERSION " model 0x%X\n",
|
|
boot_cpu_data.x86_model);
|
|
|
|
intel_idle_cpuidle_devices = alloc_percpu(struct cpuidle_device);
|
|
if (!intel_idle_cpuidle_devices)
|
|
return -ENOMEM;
|
|
|
|
intel_idle_cpuidle_driver_init(&intel_idle_driver);
|
|
|
|
retval = cpuidle_register_driver(&intel_idle_driver);
|
|
if (retval) {
|
|
struct cpuidle_driver *drv = cpuidle_get_driver();
|
|
printk(KERN_DEBUG pr_fmt("intel_idle yielding to %s\n"),
|
|
drv ? drv->name : "none");
|
|
goto init_driver_fail;
|
|
}
|
|
|
|
retval = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "idle/intel:online",
|
|
intel_idle_cpu_online, NULL);
|
|
if (retval < 0)
|
|
goto hp_setup_fail;
|
|
|
|
pr_debug("Local APIC timer is reliable in %s\n",
|
|
boot_cpu_has(X86_FEATURE_ARAT) ? "all C-states" : "C1");
|
|
|
|
return 0;
|
|
|
|
hp_setup_fail:
|
|
intel_idle_cpuidle_devices_uninit();
|
|
cpuidle_unregister_driver(&intel_idle_driver);
|
|
init_driver_fail:
|
|
free_percpu(intel_idle_cpuidle_devices);
|
|
return retval;
|
|
|
|
}
|
|
device_initcall(intel_idle_init);
|
|
|
|
/*
|
|
* We are not really modular, but we used to support that. Meaning we also
|
|
* support "intel_idle.max_cstate=..." at boot and also a read-only export of
|
|
* it at /sys/module/intel_idle/parameters/max_cstate -- so using module_param
|
|
* is the easiest way (currently) to continue doing that.
|
|
*/
|
|
module_param(max_cstate, int, 0444);
|
|
/*
|
|
* The positions of the bits that are set in this number are the indices of the
|
|
* idle states to be disabled by default (as reflected by the names of the
|
|
* corresponding idle state directories in sysfs, "state0", "state1" ...
|
|
* "state<i>" ..., where <i> is the index of the given state).
|
|
*/
|
|
module_param_named(states_off, disabled_states_mask, uint, 0444);
|
|
MODULE_PARM_DESC(states_off, "Mask of disabled idle states");
|
|
/*
|
|
* Some platforms come with mutually exclusive C-states, so that if one is
|
|
* enabled, the other C-states must not be used. Example: C1 and C1E on
|
|
* Sapphire Rapids platform. This parameter allows for selecting the
|
|
* preferred C-states among the groups of mutually exclusive C-states - the
|
|
* selected C-states will be registered, the other C-states from the mutually
|
|
* exclusive group won't be registered. If the platform has no mutually
|
|
* exclusive C-states, this parameter has no effect.
|
|
*/
|
|
module_param_named(preferred_cstates, preferred_states_mask, uint, 0444);
|
|
MODULE_PARM_DESC(preferred_cstates, "Mask of preferred idle states");
|