mirror of
https://github.com/torvalds/linux.git
synced 2024-12-05 10:32:35 +00:00
f45c5b1c27
Move the soc revision parsing to the initial probe, saving the driver
from parsing the register multiple times.
Use this variable to select the correct divisor table for the AHB clock.
Before this fix the A2 would have used the A0 table.
Fixes: 2d491066cc
("clk: ast2600: Fix AHB clock divider for A1")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210922235449.213631-1-joel@jms.id.au
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
820 lines
23 KiB
C
820 lines
23 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
// Copyright IBM Corp
|
|
// Copyright ASPEED Technology
|
|
|
|
#define pr_fmt(fmt) "clk-ast2600: " fmt
|
|
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <dt-bindings/clock/ast2600-clock.h>
|
|
|
|
#include "clk-aspeed.h"
|
|
|
|
#define ASPEED_G6_NUM_CLKS 71
|
|
|
|
#define ASPEED_G6_SILICON_REV 0x014
|
|
#define CHIP_REVISION_ID GENMASK(23, 16)
|
|
|
|
#define ASPEED_G6_RESET_CTRL 0x040
|
|
#define ASPEED_G6_RESET_CTRL2 0x050
|
|
|
|
#define ASPEED_G6_CLK_STOP_CTRL 0x080
|
|
#define ASPEED_G6_CLK_STOP_CTRL2 0x090
|
|
|
|
#define ASPEED_G6_MISC_CTRL 0x0C0
|
|
#define UART_DIV13_EN BIT(12)
|
|
|
|
#define ASPEED_G6_CLK_SELECTION1 0x300
|
|
#define ASPEED_G6_CLK_SELECTION2 0x304
|
|
#define ASPEED_G6_CLK_SELECTION4 0x310
|
|
|
|
#define ASPEED_HPLL_PARAM 0x200
|
|
#define ASPEED_APLL_PARAM 0x210
|
|
#define ASPEED_MPLL_PARAM 0x220
|
|
#define ASPEED_EPLL_PARAM 0x240
|
|
#define ASPEED_DPLL_PARAM 0x260
|
|
|
|
#define ASPEED_G6_STRAP1 0x500
|
|
|
|
#define ASPEED_MAC12_CLK_DLY 0x340
|
|
#define ASPEED_MAC34_CLK_DLY 0x350
|
|
|
|
/* Globally visible clocks */
|
|
static DEFINE_SPINLOCK(aspeed_g6_clk_lock);
|
|
|
|
/* Keeps track of all clocks */
|
|
static struct clk_hw_onecell_data *aspeed_g6_clk_data;
|
|
|
|
static void __iomem *scu_g6_base;
|
|
/* AST2600 revision: A0, A1, A2, etc */
|
|
static u8 soc_rev;
|
|
|
|
/*
|
|
* Clocks marked with CLK_IS_CRITICAL:
|
|
*
|
|
* ref0 and ref1 are essential for the SoC to operate
|
|
* mpll is required if SDRAM is used
|
|
*/
|
|
static const struct aspeed_gate_data aspeed_g6_gates[] = {
|
|
/* clk rst name parent flags */
|
|
[ASPEED_CLK_GATE_MCLK] = { 0, -1, "mclk-gate", "mpll", CLK_IS_CRITICAL }, /* SDRAM */
|
|
[ASPEED_CLK_GATE_ECLK] = { 1, 6, "eclk-gate", "eclk", 0 }, /* Video Engine */
|
|
[ASPEED_CLK_GATE_GCLK] = { 2, 7, "gclk-gate", NULL, 0 }, /* 2D engine */
|
|
/* vclk parent - dclk/d1clk/hclk/mclk */
|
|
[ASPEED_CLK_GATE_VCLK] = { 3, -1, "vclk-gate", NULL, 0 }, /* Video Capture */
|
|
[ASPEED_CLK_GATE_BCLK] = { 4, 8, "bclk-gate", "bclk", 0 }, /* PCIe/PCI */
|
|
/* From dpll */
|
|
[ASPEED_CLK_GATE_DCLK] = { 5, -1, "dclk-gate", NULL, CLK_IS_CRITICAL }, /* DAC */
|
|
[ASPEED_CLK_GATE_REF0CLK] = { 6, -1, "ref0clk-gate", "clkin", CLK_IS_CRITICAL },
|
|
[ASPEED_CLK_GATE_USBPORT2CLK] = { 7, 3, "usb-port2-gate", NULL, 0 }, /* USB2.0 Host port 2 */
|
|
/* Reserved 8 */
|
|
[ASPEED_CLK_GATE_USBUHCICLK] = { 9, 15, "usb-uhci-gate", NULL, 0 }, /* USB1.1 (requires port 2 enabled) */
|
|
/* From dpll/epll/40mhz usb p1 phy/gpioc6/dp phy pll */
|
|
[ASPEED_CLK_GATE_D1CLK] = { 10, 13, "d1clk-gate", "d1clk", 0 }, /* GFX CRT */
|
|
/* Reserved 11/12 */
|
|
[ASPEED_CLK_GATE_YCLK] = { 13, 4, "yclk-gate", NULL, 0 }, /* HAC */
|
|
[ASPEED_CLK_GATE_USBPORT1CLK] = { 14, 14, "usb-port1-gate", NULL, 0 }, /* USB2 hub/USB2 host port 1/USB1.1 dev */
|
|
[ASPEED_CLK_GATE_UART5CLK] = { 15, -1, "uart5clk-gate", "uart", 0 }, /* UART5 */
|
|
/* Reserved 16/19 */
|
|
[ASPEED_CLK_GATE_MAC1CLK] = { 20, 11, "mac1clk-gate", "mac12", 0 }, /* MAC1 */
|
|
[ASPEED_CLK_GATE_MAC2CLK] = { 21, 12, "mac2clk-gate", "mac12", 0 }, /* MAC2 */
|
|
/* Reserved 22/23 */
|
|
[ASPEED_CLK_GATE_RSACLK] = { 24, 4, "rsaclk-gate", NULL, 0 }, /* HAC */
|
|
[ASPEED_CLK_GATE_RVASCLK] = { 25, 9, "rvasclk-gate", NULL, 0 }, /* RVAS */
|
|
/* Reserved 26 */
|
|
[ASPEED_CLK_GATE_EMMCCLK] = { 27, 16, "emmcclk-gate", NULL, 0 }, /* For card clk */
|
|
/* Reserved 28/29/30 */
|
|
[ASPEED_CLK_GATE_LCLK] = { 32, 32, "lclk-gate", NULL, 0 }, /* LPC */
|
|
[ASPEED_CLK_GATE_ESPICLK] = { 33, -1, "espiclk-gate", NULL, 0 }, /* eSPI */
|
|
[ASPEED_CLK_GATE_REF1CLK] = { 34, -1, "ref1clk-gate", "clkin", CLK_IS_CRITICAL },
|
|
/* Reserved 35 */
|
|
[ASPEED_CLK_GATE_SDCLK] = { 36, 56, "sdclk-gate", NULL, 0 }, /* SDIO/SD */
|
|
[ASPEED_CLK_GATE_LHCCLK] = { 37, -1, "lhclk-gate", "lhclk", 0 }, /* LPC master/LPC+ */
|
|
/* Reserved 38 RSA: no longer used */
|
|
/* Reserved 39 */
|
|
[ASPEED_CLK_GATE_I3C0CLK] = { 40, 40, "i3c0clk-gate", NULL, 0 }, /* I3C0 */
|
|
[ASPEED_CLK_GATE_I3C1CLK] = { 41, 41, "i3c1clk-gate", NULL, 0 }, /* I3C1 */
|
|
[ASPEED_CLK_GATE_I3C2CLK] = { 42, 42, "i3c2clk-gate", NULL, 0 }, /* I3C2 */
|
|
[ASPEED_CLK_GATE_I3C3CLK] = { 43, 43, "i3c3clk-gate", NULL, 0 }, /* I3C3 */
|
|
[ASPEED_CLK_GATE_I3C4CLK] = { 44, 44, "i3c4clk-gate", NULL, 0 }, /* I3C4 */
|
|
[ASPEED_CLK_GATE_I3C5CLK] = { 45, 45, "i3c5clk-gate", NULL, 0 }, /* I3C5 */
|
|
[ASPEED_CLK_GATE_I3C6CLK] = { 46, 46, "i3c6clk-gate", NULL, 0 }, /* I3C6 */
|
|
[ASPEED_CLK_GATE_I3C7CLK] = { 47, 47, "i3c7clk-gate", NULL, 0 }, /* I3C7 */
|
|
[ASPEED_CLK_GATE_UART1CLK] = { 48, -1, "uart1clk-gate", "uart", 0 }, /* UART1 */
|
|
[ASPEED_CLK_GATE_UART2CLK] = { 49, -1, "uart2clk-gate", "uart", 0 }, /* UART2 */
|
|
[ASPEED_CLK_GATE_UART3CLK] = { 50, -1, "uart3clk-gate", "uart", 0 }, /* UART3 */
|
|
[ASPEED_CLK_GATE_UART4CLK] = { 51, -1, "uart4clk-gate", "uart", 0 }, /* UART4 */
|
|
[ASPEED_CLK_GATE_MAC3CLK] = { 52, 52, "mac3clk-gate", "mac34", 0 }, /* MAC3 */
|
|
[ASPEED_CLK_GATE_MAC4CLK] = { 53, 53, "mac4clk-gate", "mac34", 0 }, /* MAC4 */
|
|
[ASPEED_CLK_GATE_UART6CLK] = { 54, -1, "uart6clk-gate", "uartx", 0 }, /* UART6 */
|
|
[ASPEED_CLK_GATE_UART7CLK] = { 55, -1, "uart7clk-gate", "uartx", 0 }, /* UART7 */
|
|
[ASPEED_CLK_GATE_UART8CLK] = { 56, -1, "uart8clk-gate", "uartx", 0 }, /* UART8 */
|
|
[ASPEED_CLK_GATE_UART9CLK] = { 57, -1, "uart9clk-gate", "uartx", 0 }, /* UART9 */
|
|
[ASPEED_CLK_GATE_UART10CLK] = { 58, -1, "uart10clk-gate", "uartx", 0 }, /* UART10 */
|
|
[ASPEED_CLK_GATE_UART11CLK] = { 59, -1, "uart11clk-gate", "uartx", 0 }, /* UART11 */
|
|
[ASPEED_CLK_GATE_UART12CLK] = { 60, -1, "uart12clk-gate", "uartx", 0 }, /* UART12 */
|
|
[ASPEED_CLK_GATE_UART13CLK] = { 61, -1, "uart13clk-gate", "uartx", 0 }, /* UART13 */
|
|
[ASPEED_CLK_GATE_FSICLK] = { 62, 59, "fsiclk-gate", NULL, 0 }, /* FSI */
|
|
};
|
|
|
|
static const struct clk_div_table ast2600_eclk_div_table[] = {
|
|
{ 0x0, 2 },
|
|
{ 0x1, 2 },
|
|
{ 0x2, 3 },
|
|
{ 0x3, 4 },
|
|
{ 0x4, 5 },
|
|
{ 0x5, 6 },
|
|
{ 0x6, 7 },
|
|
{ 0x7, 8 },
|
|
{ 0 }
|
|
};
|
|
|
|
static const struct clk_div_table ast2600_emmc_extclk_div_table[] = {
|
|
{ 0x0, 2 },
|
|
{ 0x1, 4 },
|
|
{ 0x2, 6 },
|
|
{ 0x3, 8 },
|
|
{ 0x4, 10 },
|
|
{ 0x5, 12 },
|
|
{ 0x6, 14 },
|
|
{ 0x7, 16 },
|
|
{ 0 }
|
|
};
|
|
|
|
static const struct clk_div_table ast2600_mac_div_table[] = {
|
|
{ 0x0, 4 },
|
|
{ 0x1, 4 },
|
|
{ 0x2, 6 },
|
|
{ 0x3, 8 },
|
|
{ 0x4, 10 },
|
|
{ 0x5, 12 },
|
|
{ 0x6, 14 },
|
|
{ 0x7, 16 },
|
|
{ 0 }
|
|
};
|
|
|
|
static const struct clk_div_table ast2600_div_table[] = {
|
|
{ 0x0, 4 },
|
|
{ 0x1, 8 },
|
|
{ 0x2, 12 },
|
|
{ 0x3, 16 },
|
|
{ 0x4, 20 },
|
|
{ 0x5, 24 },
|
|
{ 0x6, 28 },
|
|
{ 0x7, 32 },
|
|
{ 0 }
|
|
};
|
|
|
|
/* For hpll/dpll/epll/mpll */
|
|
static struct clk_hw *ast2600_calc_pll(const char *name, u32 val)
|
|
{
|
|
unsigned int mult, div;
|
|
|
|
if (val & BIT(24)) {
|
|
/* Pass through mode */
|
|
mult = div = 1;
|
|
} else {
|
|
/* F = 25Mhz * [(M + 2) / (n + 1)] / (p + 1) */
|
|
u32 m = val & 0x1fff;
|
|
u32 n = (val >> 13) & 0x3f;
|
|
u32 p = (val >> 19) & 0xf;
|
|
mult = (m + 1) / (n + 1);
|
|
div = (p + 1);
|
|
}
|
|
return clk_hw_register_fixed_factor(NULL, name, "clkin", 0,
|
|
mult, div);
|
|
};
|
|
|
|
static struct clk_hw *ast2600_calc_apll(const char *name, u32 val)
|
|
{
|
|
unsigned int mult, div;
|
|
|
|
if (soc_rev >= 2) {
|
|
if (val & BIT(24)) {
|
|
/* Pass through mode */
|
|
mult = div = 1;
|
|
} else {
|
|
/* F = 25Mhz * [(m + 1) / (n + 1)] / (p + 1) */
|
|
u32 m = val & 0x1fff;
|
|
u32 n = (val >> 13) & 0x3f;
|
|
u32 p = (val >> 19) & 0xf;
|
|
|
|
mult = (m + 1);
|
|
div = (n + 1) * (p + 1);
|
|
}
|
|
} else {
|
|
if (val & BIT(20)) {
|
|
/* Pass through mode */
|
|
mult = div = 1;
|
|
} else {
|
|
/* F = 25Mhz * (2-od) * [(m + 2) / (n + 1)] */
|
|
u32 m = (val >> 5) & 0x3f;
|
|
u32 od = (val >> 4) & 0x1;
|
|
u32 n = val & 0xf;
|
|
|
|
mult = (2 - od) * (m + 2);
|
|
div = n + 1;
|
|
}
|
|
}
|
|
return clk_hw_register_fixed_factor(NULL, name, "clkin", 0,
|
|
mult, div);
|
|
};
|
|
|
|
static u32 get_bit(u8 idx)
|
|
{
|
|
return BIT(idx % 32);
|
|
}
|
|
|
|
static u32 get_reset_reg(struct aspeed_clk_gate *gate)
|
|
{
|
|
if (gate->reset_idx < 32)
|
|
return ASPEED_G6_RESET_CTRL;
|
|
|
|
return ASPEED_G6_RESET_CTRL2;
|
|
}
|
|
|
|
static u32 get_clock_reg(struct aspeed_clk_gate *gate)
|
|
{
|
|
if (gate->clock_idx < 32)
|
|
return ASPEED_G6_CLK_STOP_CTRL;
|
|
|
|
return ASPEED_G6_CLK_STOP_CTRL2;
|
|
}
|
|
|
|
static int aspeed_g6_clk_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
|
|
u32 clk = get_bit(gate->clock_idx);
|
|
u32 rst = get_bit(gate->reset_idx);
|
|
u32 reg;
|
|
u32 enval;
|
|
|
|
/*
|
|
* If the IP is in reset, treat the clock as not enabled,
|
|
* this happens with some clocks such as the USB one when
|
|
* coming from cold reset. Without this, aspeed_clk_enable()
|
|
* will fail to lift the reset.
|
|
*/
|
|
if (gate->reset_idx >= 0) {
|
|
regmap_read(gate->map, get_reset_reg(gate), ®);
|
|
|
|
if (reg & rst)
|
|
return 0;
|
|
}
|
|
|
|
regmap_read(gate->map, get_clock_reg(gate), ®);
|
|
|
|
enval = (gate->flags & CLK_GATE_SET_TO_DISABLE) ? 0 : clk;
|
|
|
|
return ((reg & clk) == enval) ? 1 : 0;
|
|
}
|
|
|
|
static int aspeed_g6_clk_enable(struct clk_hw *hw)
|
|
{
|
|
struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
|
|
unsigned long flags;
|
|
u32 clk = get_bit(gate->clock_idx);
|
|
u32 rst = get_bit(gate->reset_idx);
|
|
|
|
spin_lock_irqsave(gate->lock, flags);
|
|
|
|
if (aspeed_g6_clk_is_enabled(hw)) {
|
|
spin_unlock_irqrestore(gate->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
if (gate->reset_idx >= 0) {
|
|
/* Put IP in reset */
|
|
regmap_write(gate->map, get_reset_reg(gate), rst);
|
|
/* Delay 100us */
|
|
udelay(100);
|
|
}
|
|
|
|
/* Enable clock */
|
|
if (gate->flags & CLK_GATE_SET_TO_DISABLE) {
|
|
/* Clock is clear to enable, so use set to clear register */
|
|
regmap_write(gate->map, get_clock_reg(gate) + 0x04, clk);
|
|
} else {
|
|
/* Clock is set to enable, so use write to set register */
|
|
regmap_write(gate->map, get_clock_reg(gate), clk);
|
|
}
|
|
|
|
if (gate->reset_idx >= 0) {
|
|
/* A delay of 10ms is specified by the ASPEED docs */
|
|
mdelay(10);
|
|
/* Take IP out of reset */
|
|
regmap_write(gate->map, get_reset_reg(gate) + 0x4, rst);
|
|
}
|
|
|
|
spin_unlock_irqrestore(gate->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void aspeed_g6_clk_disable(struct clk_hw *hw)
|
|
{
|
|
struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
|
|
unsigned long flags;
|
|
u32 clk = get_bit(gate->clock_idx);
|
|
|
|
spin_lock_irqsave(gate->lock, flags);
|
|
|
|
if (gate->flags & CLK_GATE_SET_TO_DISABLE) {
|
|
regmap_write(gate->map, get_clock_reg(gate), clk);
|
|
} else {
|
|
/* Use set to clear register */
|
|
regmap_write(gate->map, get_clock_reg(gate) + 0x4, clk);
|
|
}
|
|
|
|
spin_unlock_irqrestore(gate->lock, flags);
|
|
}
|
|
|
|
static const struct clk_ops aspeed_g6_clk_gate_ops = {
|
|
.enable = aspeed_g6_clk_enable,
|
|
.disable = aspeed_g6_clk_disable,
|
|
.is_enabled = aspeed_g6_clk_is_enabled,
|
|
};
|
|
|
|
static int aspeed_g6_reset_deassert(struct reset_controller_dev *rcdev,
|
|
unsigned long id)
|
|
{
|
|
struct aspeed_reset *ar = to_aspeed_reset(rcdev);
|
|
u32 rst = get_bit(id);
|
|
u32 reg = id >= 32 ? ASPEED_G6_RESET_CTRL2 : ASPEED_G6_RESET_CTRL;
|
|
|
|
/* Use set to clear register */
|
|
return regmap_write(ar->map, reg + 0x04, rst);
|
|
}
|
|
|
|
static int aspeed_g6_reset_assert(struct reset_controller_dev *rcdev,
|
|
unsigned long id)
|
|
{
|
|
struct aspeed_reset *ar = to_aspeed_reset(rcdev);
|
|
u32 rst = get_bit(id);
|
|
u32 reg = id >= 32 ? ASPEED_G6_RESET_CTRL2 : ASPEED_G6_RESET_CTRL;
|
|
|
|
return regmap_write(ar->map, reg, rst);
|
|
}
|
|
|
|
static int aspeed_g6_reset_status(struct reset_controller_dev *rcdev,
|
|
unsigned long id)
|
|
{
|
|
struct aspeed_reset *ar = to_aspeed_reset(rcdev);
|
|
int ret;
|
|
u32 val;
|
|
u32 rst = get_bit(id);
|
|
u32 reg = id >= 32 ? ASPEED_G6_RESET_CTRL2 : ASPEED_G6_RESET_CTRL;
|
|
|
|
ret = regmap_read(ar->map, reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return !!(val & rst);
|
|
}
|
|
|
|
static const struct reset_control_ops aspeed_g6_reset_ops = {
|
|
.assert = aspeed_g6_reset_assert,
|
|
.deassert = aspeed_g6_reset_deassert,
|
|
.status = aspeed_g6_reset_status,
|
|
};
|
|
|
|
static struct clk_hw *aspeed_g6_clk_hw_register_gate(struct device *dev,
|
|
const char *name, const char *parent_name, unsigned long flags,
|
|
struct regmap *map, u8 clock_idx, u8 reset_idx,
|
|
u8 clk_gate_flags, spinlock_t *lock)
|
|
{
|
|
struct aspeed_clk_gate *gate;
|
|
struct clk_init_data init;
|
|
struct clk_hw *hw;
|
|
int ret;
|
|
|
|
gate = kzalloc(sizeof(*gate), GFP_KERNEL);
|
|
if (!gate)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
init.name = name;
|
|
init.ops = &aspeed_g6_clk_gate_ops;
|
|
init.flags = flags;
|
|
init.parent_names = parent_name ? &parent_name : NULL;
|
|
init.num_parents = parent_name ? 1 : 0;
|
|
|
|
gate->map = map;
|
|
gate->clock_idx = clock_idx;
|
|
gate->reset_idx = reset_idx;
|
|
gate->flags = clk_gate_flags;
|
|
gate->lock = lock;
|
|
gate->hw.init = &init;
|
|
|
|
hw = &gate->hw;
|
|
ret = clk_hw_register(dev, hw);
|
|
if (ret) {
|
|
kfree(gate);
|
|
hw = ERR_PTR(ret);
|
|
}
|
|
|
|
return hw;
|
|
}
|
|
|
|
static const char *const emmc_extclk_parent_names[] = {
|
|
"emmc_extclk_hpll_in",
|
|
"mpll",
|
|
};
|
|
|
|
static const char * const vclk_parent_names[] = {
|
|
"dpll",
|
|
"d1pll",
|
|
"hclk",
|
|
"mclk",
|
|
};
|
|
|
|
static const char * const d1clk_parent_names[] = {
|
|
"dpll",
|
|
"epll",
|
|
"usb-phy-40m",
|
|
"gpioc6_clkin",
|
|
"dp_phy_pll",
|
|
};
|
|
|
|
static int aspeed_g6_clk_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct aspeed_reset *ar;
|
|
struct regmap *map;
|
|
struct clk_hw *hw;
|
|
u32 val, rate;
|
|
int i, ret;
|
|
|
|
map = syscon_node_to_regmap(dev->of_node);
|
|
if (IS_ERR(map)) {
|
|
dev_err(dev, "no syscon regmap\n");
|
|
return PTR_ERR(map);
|
|
}
|
|
|
|
ar = devm_kzalloc(dev, sizeof(*ar), GFP_KERNEL);
|
|
if (!ar)
|
|
return -ENOMEM;
|
|
|
|
ar->map = map;
|
|
|
|
ar->rcdev.owner = THIS_MODULE;
|
|
ar->rcdev.nr_resets = 64;
|
|
ar->rcdev.ops = &aspeed_g6_reset_ops;
|
|
ar->rcdev.of_node = dev->of_node;
|
|
|
|
ret = devm_reset_controller_register(dev, &ar->rcdev);
|
|
if (ret) {
|
|
dev_err(dev, "could not register reset controller\n");
|
|
return ret;
|
|
}
|
|
|
|
/* UART clock div13 setting */
|
|
regmap_read(map, ASPEED_G6_MISC_CTRL, &val);
|
|
if (val & UART_DIV13_EN)
|
|
rate = 24000000 / 13;
|
|
else
|
|
rate = 24000000;
|
|
hw = clk_hw_register_fixed_rate(dev, "uart", NULL, 0, rate);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_UART] = hw;
|
|
|
|
/* UART6~13 clock div13 setting */
|
|
regmap_read(map, 0x80, &val);
|
|
if (val & BIT(31))
|
|
rate = 24000000 / 13;
|
|
else
|
|
rate = 24000000;
|
|
hw = clk_hw_register_fixed_rate(dev, "uartx", NULL, 0, rate);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_UARTX] = hw;
|
|
|
|
/* EMMC ext clock */
|
|
hw = clk_hw_register_fixed_factor(dev, "emmc_extclk_hpll_in", "hpll",
|
|
0, 1, 2);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
|
|
hw = clk_hw_register_mux(dev, "emmc_extclk_mux",
|
|
emmc_extclk_parent_names,
|
|
ARRAY_SIZE(emmc_extclk_parent_names), 0,
|
|
scu_g6_base + ASPEED_G6_CLK_SELECTION1, 11, 1,
|
|
0, &aspeed_g6_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
|
|
hw = clk_hw_register_gate(dev, "emmc_extclk_gate", "emmc_extclk_mux",
|
|
0, scu_g6_base + ASPEED_G6_CLK_SELECTION1,
|
|
15, 0, &aspeed_g6_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
|
|
hw = clk_hw_register_divider_table(dev, "emmc_extclk",
|
|
"emmc_extclk_gate", 0,
|
|
scu_g6_base +
|
|
ASPEED_G6_CLK_SELECTION1, 12,
|
|
3, 0, ast2600_emmc_extclk_div_table,
|
|
&aspeed_g6_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_EMMC] = hw;
|
|
|
|
/* SD/SDIO clock divider and gate */
|
|
hw = clk_hw_register_gate(dev, "sd_extclk_gate", "hpll", 0,
|
|
scu_g6_base + ASPEED_G6_CLK_SELECTION4, 31, 0,
|
|
&aspeed_g6_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
hw = clk_hw_register_divider_table(dev, "sd_extclk", "sd_extclk_gate",
|
|
0, scu_g6_base + ASPEED_G6_CLK_SELECTION4, 28, 3, 0,
|
|
ast2600_div_table,
|
|
&aspeed_g6_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_SDIO] = hw;
|
|
|
|
/* MAC1/2 RMII 50MHz RCLK */
|
|
hw = clk_hw_register_fixed_rate(dev, "mac12rclk", "hpll", 0, 50000000);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
|
|
/* MAC1/2 AHB bus clock divider */
|
|
hw = clk_hw_register_divider_table(dev, "mac12", "hpll", 0,
|
|
scu_g6_base + ASPEED_G6_CLK_SELECTION1, 16, 3, 0,
|
|
ast2600_mac_div_table,
|
|
&aspeed_g6_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_MAC12] = hw;
|
|
|
|
/* RMII1 50MHz (RCLK) output enable */
|
|
hw = clk_hw_register_gate(dev, "mac1rclk", "mac12rclk", 0,
|
|
scu_g6_base + ASPEED_MAC12_CLK_DLY, 29, 0,
|
|
&aspeed_g6_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_MAC1RCLK] = hw;
|
|
|
|
/* RMII2 50MHz (RCLK) output enable */
|
|
hw = clk_hw_register_gate(dev, "mac2rclk", "mac12rclk", 0,
|
|
scu_g6_base + ASPEED_MAC12_CLK_DLY, 30, 0,
|
|
&aspeed_g6_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_MAC2RCLK] = hw;
|
|
|
|
/* MAC1/2 RMII 50MHz RCLK */
|
|
hw = clk_hw_register_fixed_rate(dev, "mac34rclk", "hclk", 0, 50000000);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
|
|
/* MAC3/4 AHB bus clock divider */
|
|
hw = clk_hw_register_divider_table(dev, "mac34", "hpll", 0,
|
|
scu_g6_base + 0x310, 24, 3, 0,
|
|
ast2600_mac_div_table,
|
|
&aspeed_g6_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_MAC34] = hw;
|
|
|
|
/* RMII3 50MHz (RCLK) output enable */
|
|
hw = clk_hw_register_gate(dev, "mac3rclk", "mac34rclk", 0,
|
|
scu_g6_base + ASPEED_MAC34_CLK_DLY, 29, 0,
|
|
&aspeed_g6_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_MAC3RCLK] = hw;
|
|
|
|
/* RMII4 50MHz (RCLK) output enable */
|
|
hw = clk_hw_register_gate(dev, "mac4rclk", "mac34rclk", 0,
|
|
scu_g6_base + ASPEED_MAC34_CLK_DLY, 30, 0,
|
|
&aspeed_g6_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_MAC4RCLK] = hw;
|
|
|
|
/* LPC Host (LHCLK) clock divider */
|
|
hw = clk_hw_register_divider_table(dev, "lhclk", "hpll", 0,
|
|
scu_g6_base + ASPEED_G6_CLK_SELECTION1, 20, 3, 0,
|
|
ast2600_div_table,
|
|
&aspeed_g6_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_LHCLK] = hw;
|
|
|
|
/* gfx d1clk : use dp clk */
|
|
regmap_update_bits(map, ASPEED_G6_CLK_SELECTION1, GENMASK(10, 8), BIT(10));
|
|
/* SoC Display clock selection */
|
|
hw = clk_hw_register_mux(dev, "d1clk", d1clk_parent_names,
|
|
ARRAY_SIZE(d1clk_parent_names), 0,
|
|
scu_g6_base + ASPEED_G6_CLK_SELECTION1, 8, 3, 0,
|
|
&aspeed_g6_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_D1CLK] = hw;
|
|
|
|
/* d1 clk div 0x308[17:15] x [14:12] - 8,7,6,5,4,3,2,1 */
|
|
regmap_write(map, 0x308, 0x12000); /* 3x3 = 9 */
|
|
|
|
/* P-Bus (BCLK) clock divider */
|
|
hw = clk_hw_register_divider_table(dev, "bclk", "hpll", 0,
|
|
scu_g6_base + ASPEED_G6_CLK_SELECTION1, 20, 3, 0,
|
|
ast2600_div_table,
|
|
&aspeed_g6_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_BCLK] = hw;
|
|
|
|
/* Video Capture clock selection */
|
|
hw = clk_hw_register_mux(dev, "vclk", vclk_parent_names,
|
|
ARRAY_SIZE(vclk_parent_names), 0,
|
|
scu_g6_base + ASPEED_G6_CLK_SELECTION2, 12, 3, 0,
|
|
&aspeed_g6_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_VCLK] = hw;
|
|
|
|
/* Video Engine clock divider */
|
|
hw = clk_hw_register_divider_table(dev, "eclk", NULL, 0,
|
|
scu_g6_base + ASPEED_G6_CLK_SELECTION1, 28, 3, 0,
|
|
ast2600_eclk_div_table,
|
|
&aspeed_g6_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_ECLK] = hw;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(aspeed_g6_gates); i++) {
|
|
const struct aspeed_gate_data *gd = &aspeed_g6_gates[i];
|
|
u32 gate_flags;
|
|
|
|
/*
|
|
* Special case: the USB port 1 clock (bit 14) is always
|
|
* working the opposite way from the other ones.
|
|
*/
|
|
gate_flags = (gd->clock_idx == 14) ? 0 : CLK_GATE_SET_TO_DISABLE;
|
|
hw = aspeed_g6_clk_hw_register_gate(dev,
|
|
gd->name,
|
|
gd->parent_name,
|
|
gd->flags,
|
|
map,
|
|
gd->clock_idx,
|
|
gd->reset_idx,
|
|
gate_flags,
|
|
&aspeed_g6_clk_lock);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
aspeed_g6_clk_data->hws[i] = hw;
|
|
}
|
|
|
|
return 0;
|
|
};
|
|
|
|
static const struct of_device_id aspeed_g6_clk_dt_ids[] = {
|
|
{ .compatible = "aspeed,ast2600-scu" },
|
|
{ }
|
|
};
|
|
|
|
static struct platform_driver aspeed_g6_clk_driver = {
|
|
.probe = aspeed_g6_clk_probe,
|
|
.driver = {
|
|
.name = "ast2600-clk",
|
|
.of_match_table = aspeed_g6_clk_dt_ids,
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
};
|
|
builtin_platform_driver(aspeed_g6_clk_driver);
|
|
|
|
static const u32 ast2600_a0_axi_ahb_div_table[] = {
|
|
2, 2, 3, 5,
|
|
};
|
|
|
|
static const u32 ast2600_a1_axi_ahb_div0_tbl[] = {
|
|
3, 2, 3, 4,
|
|
};
|
|
|
|
static const u32 ast2600_a1_axi_ahb_div1_tbl[] = {
|
|
3, 4, 6, 8,
|
|
};
|
|
|
|
static const u32 ast2600_a1_axi_ahb200_tbl[] = {
|
|
3, 4, 3, 4, 2, 2, 2, 2,
|
|
};
|
|
|
|
static void __init aspeed_g6_cc(struct regmap *map)
|
|
{
|
|
struct clk_hw *hw;
|
|
u32 val, div, divbits, axi_div, ahb_div;
|
|
|
|
clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, 25000000);
|
|
|
|
/*
|
|
* High-speed PLL clock derived from the crystal. This the CPU clock,
|
|
* and we assume that it is enabled
|
|
*/
|
|
regmap_read(map, ASPEED_HPLL_PARAM, &val);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_HPLL] = ast2600_calc_pll("hpll", val);
|
|
|
|
regmap_read(map, ASPEED_MPLL_PARAM, &val);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_MPLL] = ast2600_calc_pll("mpll", val);
|
|
|
|
regmap_read(map, ASPEED_DPLL_PARAM, &val);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_DPLL] = ast2600_calc_pll("dpll", val);
|
|
|
|
regmap_read(map, ASPEED_EPLL_PARAM, &val);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_EPLL] = ast2600_calc_pll("epll", val);
|
|
|
|
regmap_read(map, ASPEED_APLL_PARAM, &val);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_APLL] = ast2600_calc_apll("apll", val);
|
|
|
|
/* Strap bits 12:11 define the AXI/AHB clock frequency ratio (aka HCLK)*/
|
|
regmap_read(map, ASPEED_G6_STRAP1, &val);
|
|
if (val & BIT(16))
|
|
axi_div = 1;
|
|
else
|
|
axi_div = 2;
|
|
|
|
divbits = (val >> 11) & 0x3;
|
|
if (soc_rev >= 1) {
|
|
if (!divbits) {
|
|
ahb_div = ast2600_a1_axi_ahb200_tbl[(val >> 8) & 0x3];
|
|
if (val & BIT(16))
|
|
ahb_div *= 2;
|
|
} else {
|
|
if (val & BIT(16))
|
|
ahb_div = ast2600_a1_axi_ahb_div1_tbl[divbits];
|
|
else
|
|
ahb_div = ast2600_a1_axi_ahb_div0_tbl[divbits];
|
|
}
|
|
} else {
|
|
ahb_div = ast2600_a0_axi_ahb_div_table[(val >> 11) & 0x3];
|
|
}
|
|
|
|
hw = clk_hw_register_fixed_factor(NULL, "ahb", "hpll", 0, 1, axi_div * ahb_div);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_AHB] = hw;
|
|
|
|
regmap_read(map, ASPEED_G6_CLK_SELECTION1, &val);
|
|
val = (val >> 23) & 0x7;
|
|
div = 4 * (val + 1);
|
|
hw = clk_hw_register_fixed_factor(NULL, "apb1", "hpll", 0, 1, div);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_APB1] = hw;
|
|
|
|
regmap_read(map, ASPEED_G6_CLK_SELECTION4, &val);
|
|
val = (val >> 9) & 0x7;
|
|
div = 2 * (val + 1);
|
|
hw = clk_hw_register_fixed_factor(NULL, "apb2", "ahb", 0, 1, div);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_APB2] = hw;
|
|
|
|
/* USB 2.0 port1 phy 40MHz clock */
|
|
hw = clk_hw_register_fixed_rate(NULL, "usb-phy-40m", NULL, 0, 40000000);
|
|
aspeed_g6_clk_data->hws[ASPEED_CLK_USBPHY_40M] = hw;
|
|
};
|
|
|
|
static void __init aspeed_g6_cc_init(struct device_node *np)
|
|
{
|
|
struct regmap *map;
|
|
int ret;
|
|
int i;
|
|
|
|
scu_g6_base = of_iomap(np, 0);
|
|
if (!scu_g6_base)
|
|
return;
|
|
|
|
soc_rev = (readl(scu_g6_base + ASPEED_G6_SILICON_REV) & CHIP_REVISION_ID) >> 16;
|
|
|
|
aspeed_g6_clk_data = kzalloc(struct_size(aspeed_g6_clk_data, hws,
|
|
ASPEED_G6_NUM_CLKS), GFP_KERNEL);
|
|
if (!aspeed_g6_clk_data)
|
|
return;
|
|
|
|
/*
|
|
* This way all clocks fetched before the platform device probes,
|
|
* except those we assign here for early use, will be deferred.
|
|
*/
|
|
for (i = 0; i < ASPEED_G6_NUM_CLKS; i++)
|
|
aspeed_g6_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER);
|
|
|
|
/*
|
|
* We check that the regmap works on this very first access,
|
|
* but as this is an MMIO-backed regmap, subsequent regmap
|
|
* access is not going to fail and we skip error checks from
|
|
* this point.
|
|
*/
|
|
map = syscon_node_to_regmap(np);
|
|
if (IS_ERR(map)) {
|
|
pr_err("no syscon regmap\n");
|
|
return;
|
|
}
|
|
|
|
aspeed_g6_cc(map);
|
|
aspeed_g6_clk_data->num = ASPEED_G6_NUM_CLKS;
|
|
ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, aspeed_g6_clk_data);
|
|
if (ret)
|
|
pr_err("failed to add DT provider: %d\n", ret);
|
|
};
|
|
CLK_OF_DECLARE_DRIVER(aspeed_cc_g6, "aspeed,ast2600-scu", aspeed_g6_cc_init);
|