mirror of
https://github.com/torvalds/linux.git
synced 2024-12-10 21:21:54 +00:00
dafbbf5c57
sil680_sel{dev|reg}() return a PCI config space address but needlessly use the *unsigned long* type for that, whereas the PCI config space accessors take *int* for the address parameter. Switch these functions to returning *int*, updating the local variables at their call sites. Get rid of the 'base' local variables in these functions, while at it... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
439 lines
11 KiB
C
439 lines
11 KiB
C
/*
|
|
* pata_sil680.c - SIL680 PATA for new ATA layer
|
|
* (C) 2005 Red Hat Inc
|
|
*
|
|
* based upon
|
|
*
|
|
* linux/drivers/ide/pci/siimage.c Version 1.07 Nov 30, 2003
|
|
*
|
|
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
|
|
* Copyright (C) 2003 Red Hat <alan@redhat.com>
|
|
*
|
|
* May be copied or modified under the terms of the GNU General Public License
|
|
*
|
|
* Documentation publicly available.
|
|
*
|
|
* If you have strange problems with nVidia chipset systems please
|
|
* see the SI support documentation and update your system BIOS
|
|
* if necessary
|
|
*
|
|
* TODO
|
|
* If we know all our devices are LBA28 (or LBA28 sized) we could use
|
|
* the command fifo mode.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "pata_sil680"
|
|
#define DRV_VERSION "0.4.9"
|
|
|
|
#define SIL680_MMIO_BAR 5
|
|
|
|
/**
|
|
* sil680_selreg - return register base
|
|
* @ap: ATA interface
|
|
* @r: config offset
|
|
*
|
|
* Turn a config register offset into the right address in PCI space
|
|
* to access the control register in question.
|
|
*
|
|
* Thankfully this is a configuration operation so isn't performance
|
|
* criticial.
|
|
*/
|
|
|
|
static int sil680_selreg(struct ata_port *ap, int r)
|
|
{
|
|
return 0xA0 + (ap->port_no << 4) + r;
|
|
}
|
|
|
|
/**
|
|
* sil680_seldev - return register base
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
* @r: config offset
|
|
*
|
|
* Turn a config register offset into the right address in PCI space
|
|
* to access the control register in question including accounting for
|
|
* the unit shift.
|
|
*/
|
|
|
|
static int sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r)
|
|
{
|
|
return 0xA0 + (ap->port_no << 4) + r + (adev->devno << 1);
|
|
}
|
|
|
|
|
|
/**
|
|
* sil680_cable_detect - cable detection
|
|
* @ap: ATA port
|
|
*
|
|
* Perform cable detection. The SIL680 stores this in PCI config
|
|
* space for us.
|
|
*/
|
|
|
|
static int sil680_cable_detect(struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
int addr = sil680_selreg(ap, 0);
|
|
u8 ata66;
|
|
|
|
pci_read_config_byte(pdev, addr, &ata66);
|
|
if (ata66 & 1)
|
|
return ATA_CBL_PATA80;
|
|
else
|
|
return ATA_CBL_PATA40;
|
|
}
|
|
|
|
/**
|
|
* sil680_set_piomode - set PIO mode data
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
*
|
|
* Program the SIL680 registers for PIO mode. Note that the task speed
|
|
* registers are shared between the devices so we must pick the lowest
|
|
* mode for command work.
|
|
*/
|
|
|
|
static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
static const u16 speed_p[5] = {
|
|
0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1
|
|
};
|
|
static const u16 speed_t[5] = {
|
|
0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1
|
|
};
|
|
|
|
int tfaddr = sil680_selreg(ap, 0x02);
|
|
int addr = sil680_seldev(ap, adev, 0x04);
|
|
int addr_mask = 0x80 + 4 * ap->port_no;
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
int pio = adev->pio_mode - XFER_PIO_0;
|
|
int lowest_pio = pio;
|
|
int port_shift = 4 * adev->devno;
|
|
u16 reg;
|
|
u8 mode;
|
|
|
|
struct ata_device *pair = ata_dev_pair(adev);
|
|
|
|
if (pair != NULL && adev->pio_mode > pair->pio_mode)
|
|
lowest_pio = pair->pio_mode - XFER_PIO_0;
|
|
|
|
pci_write_config_word(pdev, addr, speed_p[pio]);
|
|
pci_write_config_word(pdev, tfaddr, speed_t[lowest_pio]);
|
|
|
|
pci_read_config_word(pdev, tfaddr-2, ®);
|
|
pci_read_config_byte(pdev, addr_mask, &mode);
|
|
|
|
reg &= ~0x0200; /* Clear IORDY */
|
|
mode &= ~(3 << port_shift); /* Clear IORDY and DMA bits */
|
|
|
|
if (ata_pio_need_iordy(adev)) {
|
|
reg |= 0x0200; /* Enable IORDY */
|
|
mode |= 1 << port_shift;
|
|
}
|
|
pci_write_config_word(pdev, tfaddr-2, reg);
|
|
pci_write_config_byte(pdev, addr_mask, mode);
|
|
}
|
|
|
|
/**
|
|
* sil680_set_dmamode - set DMA mode data
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
*
|
|
* Program the MWDMA/UDMA modes for the sil680 chipset.
|
|
*
|
|
* The MWDMA mode values are pulled from a lookup table
|
|
* while the chipset uses mode number for UDMA.
|
|
*/
|
|
|
|
static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
static const u8 ultra_table[2][7] = {
|
|
{ 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01, 0xFF }, /* 100MHz */
|
|
{ 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }, /* 133Mhz */
|
|
};
|
|
static const u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 };
|
|
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
int ma = sil680_seldev(ap, adev, 0x08);
|
|
int ua = sil680_seldev(ap, adev, 0x0C);
|
|
int addr_mask = 0x80 + 4 * ap->port_no;
|
|
int port_shift = adev->devno * 4;
|
|
u8 scsc, mode;
|
|
u16 multi, ultra;
|
|
|
|
pci_read_config_byte(pdev, 0x8A, &scsc);
|
|
pci_read_config_byte(pdev, addr_mask, &mode);
|
|
pci_read_config_word(pdev, ma, &multi);
|
|
pci_read_config_word(pdev, ua, &ultra);
|
|
|
|
/* Mask timing bits */
|
|
ultra &= ~0x3F;
|
|
mode &= ~(0x03 << port_shift);
|
|
|
|
/* Extract scsc */
|
|
scsc = (scsc & 0x30) ? 1 : 0;
|
|
|
|
if (adev->dma_mode >= XFER_UDMA_0) {
|
|
multi = 0x10C1;
|
|
ultra |= ultra_table[scsc][adev->dma_mode - XFER_UDMA_0];
|
|
mode |= (0x03 << port_shift);
|
|
} else {
|
|
multi = dma_table[adev->dma_mode - XFER_MW_DMA_0];
|
|
mode |= (0x02 << port_shift);
|
|
}
|
|
pci_write_config_byte(pdev, addr_mask, mode);
|
|
pci_write_config_word(pdev, ma, multi);
|
|
pci_write_config_word(pdev, ua, ultra);
|
|
}
|
|
|
|
/**
|
|
* sil680_sff_exec_command - issue ATA command to host controller
|
|
* @ap: port to which command is being issued
|
|
* @tf: ATA taskfile register set
|
|
*
|
|
* Issues ATA command, with proper synchronization with interrupt
|
|
* handler / other threads. Use our MMIO space for PCI posting to avoid
|
|
* a hideously slow cycle all the way to the device.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*/
|
|
static void sil680_sff_exec_command(struct ata_port *ap,
|
|
const struct ata_taskfile *tf)
|
|
{
|
|
iowrite8(tf->command, ap->ioaddr.command_addr);
|
|
ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
|
|
}
|
|
|
|
static bool sil680_sff_irq_check(struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
int addr = sil680_selreg(ap, 1);
|
|
u8 val;
|
|
|
|
pci_read_config_byte(pdev, addr, &val);
|
|
|
|
return val & 0x08;
|
|
}
|
|
|
|
static struct scsi_host_template sil680_sht = {
|
|
ATA_BMDMA_SHT(DRV_NAME),
|
|
};
|
|
|
|
|
|
static struct ata_port_operations sil680_port_ops = {
|
|
.inherits = &ata_bmdma32_port_ops,
|
|
.sff_exec_command = sil680_sff_exec_command,
|
|
.sff_irq_check = sil680_sff_irq_check,
|
|
.cable_detect = sil680_cable_detect,
|
|
.set_piomode = sil680_set_piomode,
|
|
.set_dmamode = sil680_set_dmamode,
|
|
};
|
|
|
|
/**
|
|
* sil680_init_chip - chip setup
|
|
* @pdev: PCI device
|
|
* @try_mmio: Indicates to caller whether MMIO should be attempted
|
|
*
|
|
* Perform all the chip setup which must be done both when the device
|
|
* is powered up on boot and when we resume in case we resumed from RAM.
|
|
* Returns the final clock settings.
|
|
*/
|
|
|
|
static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
|
|
{
|
|
u8 tmpbyte = 0;
|
|
|
|
/* FIXME: double check */
|
|
pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE,
|
|
pdev->revision ? 1 : 255);
|
|
|
|
pci_write_config_byte(pdev, 0x80, 0x00);
|
|
pci_write_config_byte(pdev, 0x84, 0x00);
|
|
|
|
pci_read_config_byte(pdev, 0x8A, &tmpbyte);
|
|
|
|
dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n",
|
|
tmpbyte & 1, tmpbyte & 0x30);
|
|
|
|
*try_mmio = 0;
|
|
#ifdef CONFIG_PPC
|
|
if (machine_is(cell))
|
|
*try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
|
|
#endif
|
|
|
|
switch (tmpbyte & 0x30) {
|
|
case 0x00:
|
|
/* 133 clock attempt to force it on */
|
|
pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10);
|
|
break;
|
|
case 0x30:
|
|
/* if clocking is disabled */
|
|
/* 133 clock attempt to force it on */
|
|
pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20);
|
|
break;
|
|
case 0x10:
|
|
/* 133 already */
|
|
break;
|
|
case 0x20:
|
|
/* BIOS set PCI x2 clocking */
|
|
break;
|
|
}
|
|
|
|
pci_read_config_byte(pdev, 0x8A, &tmpbyte);
|
|
dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n",
|
|
tmpbyte & 1, tmpbyte & 0x30);
|
|
|
|
pci_write_config_byte(pdev, 0xA1, 0x72);
|
|
pci_write_config_word(pdev, 0xA2, 0x328A);
|
|
pci_write_config_dword(pdev, 0xA4, 0x62DD62DD);
|
|
pci_write_config_dword(pdev, 0xA8, 0x43924392);
|
|
pci_write_config_dword(pdev, 0xAC, 0x40094009);
|
|
pci_write_config_byte(pdev, 0xB1, 0x72);
|
|
pci_write_config_word(pdev, 0xB2, 0x328A);
|
|
pci_write_config_dword(pdev, 0xB4, 0x62DD62DD);
|
|
pci_write_config_dword(pdev, 0xB8, 0x43924392);
|
|
pci_write_config_dword(pdev, 0xBC, 0x40094009);
|
|
|
|
switch (tmpbyte & 0x30) {
|
|
case 0x00:
|
|
dev_info(&pdev->dev, "sil680: 100MHz clock.\n");
|
|
break;
|
|
case 0x10:
|
|
dev_info(&pdev->dev, "sil680: 133MHz clock.\n");
|
|
break;
|
|
case 0x20:
|
|
dev_info(&pdev->dev, "sil680: Using PCI clock.\n");
|
|
break;
|
|
/* This last case is _NOT_ ok */
|
|
case 0x30:
|
|
dev_err(&pdev->dev, "sil680: Clock disabled ?\n");
|
|
}
|
|
return tmpbyte & 0x30;
|
|
}
|
|
|
|
static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
static const struct ata_port_info info = {
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &sil680_port_ops
|
|
};
|
|
static const struct ata_port_info info_slow = {
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA5,
|
|
.port_ops = &sil680_port_ops
|
|
};
|
|
const struct ata_port_info *ppi[] = { &info, NULL };
|
|
struct ata_host *host;
|
|
void __iomem *mmio_base;
|
|
int rc, try_mmio;
|
|
|
|
ata_print_version_once(&pdev->dev, DRV_VERSION);
|
|
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
switch (sil680_init_chip(pdev, &try_mmio)) {
|
|
case 0:
|
|
ppi[0] = &info_slow;
|
|
break;
|
|
case 0x30:
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!try_mmio)
|
|
goto use_ioports;
|
|
|
|
/* Try to acquire MMIO resources and fallback to PIO if
|
|
* that fails
|
|
*/
|
|
rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
|
|
if (rc)
|
|
goto use_ioports;
|
|
|
|
/* Allocate host and set it up */
|
|
host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
|
|
if (!host)
|
|
return -ENOMEM;
|
|
host->iomap = pcim_iomap_table(pdev);
|
|
|
|
/* Setup DMA masks */
|
|
rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
pci_set_master(pdev);
|
|
|
|
/* Get MMIO base and initialize port addresses */
|
|
mmio_base = host->iomap[SIL680_MMIO_BAR];
|
|
host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x00;
|
|
host->ports[0]->ioaddr.cmd_addr = mmio_base + 0x80;
|
|
host->ports[0]->ioaddr.ctl_addr = mmio_base + 0x8a;
|
|
host->ports[0]->ioaddr.altstatus_addr = mmio_base + 0x8a;
|
|
ata_sff_std_ports(&host->ports[0]->ioaddr);
|
|
host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x08;
|
|
host->ports[1]->ioaddr.cmd_addr = mmio_base + 0xc0;
|
|
host->ports[1]->ioaddr.ctl_addr = mmio_base + 0xca;
|
|
host->ports[1]->ioaddr.altstatus_addr = mmio_base + 0xca;
|
|
ata_sff_std_ports(&host->ports[1]->ioaddr);
|
|
|
|
/* Register & activate */
|
|
return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
|
|
IRQF_SHARED, &sil680_sht);
|
|
|
|
use_ioports:
|
|
return ata_pci_bmdma_init_one(pdev, ppi, &sil680_sht, NULL, 0);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int sil680_reinit_one(struct pci_dev *pdev)
|
|
{
|
|
struct ata_host *host = pci_get_drvdata(pdev);
|
|
int try_mmio, rc;
|
|
|
|
rc = ata_pci_device_do_resume(pdev);
|
|
if (rc)
|
|
return rc;
|
|
sil680_init_chip(pdev, &try_mmio);
|
|
ata_host_resume(host);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct pci_device_id sil680[] = {
|
|
{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680), },
|
|
|
|
{ },
|
|
};
|
|
|
|
static struct pci_driver sil680_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = sil680,
|
|
.probe = sil680_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = sil680_reinit_one,
|
|
#endif
|
|
};
|
|
|
|
module_pci_driver(sil680_pci_driver);
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("low-level driver for SI680 PATA");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, sil680);
|
|
MODULE_VERSION(DRV_VERSION);
|