Sekhar Nori 13d5e27a44 davinci: DA850/OMAP-L138: avoid using separate initcall for initializing regulator ... Using a device_initcall() for initializing the voltage regulator on DA850 is not such a good idea because it gets called for all platforms - even those who do not have a regulator implemented. This leads to a big fat warning message during boot-up when regulator cannot be found. Instead, tie initialization of voltage regulator to cpufreq init. Define a platform specific init call which in case of DA850 gets used for initializing the regulator. On other future platforms it can be used for other purposes. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>		2009-11-25 10:21:37 -08:00
..
asp.h	Davinci: DM365: Add platform device for McBSP	2009-11-25 10:21:17 -08:00
clkdev.h	davinci: major rework of clock, PLL, PSC infrastructure	2009-04-23 09:31:00 -07:00
clock.h	davinci: major rework of clock, PLL, PSC infrastructure	2009-04-23 09:31:00 -07:00
common.h	DaVinci: rename setup_usb() to davinci_setup_usb()	2009-11-25 10:21:33 -08:00
cp_intc.h	davinci: INTC: add support for TI cp_intc	2009-05-26 07:18:14 -07:00
cpufreq.h	davinci: DA850/OMAP-L138: avoid using separate initcall for initializing regulator	2009-11-25 10:21:37 -08:00
cpuidle.h	davinci: add CPU idle driver	2009-11-25 10:21:37 -08:00
cputype.h	davinci: Add base DA850/OMAP-L138 SoC support	2009-08-26 11:55:44 +03:00
da8xx.h	davinci: DA8XX/OMAP-L1XX: add support for cpuidle driver register	2009-11-25 10:21:37 -08:00
debug-macro.S	davinci: Add support for DA850/OMAP-L138 EVM board	2009-08-26 11:55:45 +03:00
dm355.h	davinci: DM355 - platform changes for vpfe capture	2009-09-16 10:25:45 -07:00
dm365.h	Davinci: DM365: Enable DaVinci Key Scan support for DM365 EVM	2009-11-25 10:21:32 -08:00
dm644x.h	DaVinci: remove unneeded #include's	2009-11-25 10:21:31 -08:00
dm646x.h	DaVinci: DM646x - platform changes for vpif capture and display drivers	2009-09-16 10:28:46 -07:00
edma.h	DaVinci: EDMA: Adding 2 new APIs for allocating/freeing PARAMs	2009-08-26 11:55:59 +03:00
emac.h	davinci: Factor out emac mac address handling	2009-05-28 15:17:47 -07:00
entry-macro.S	davinci: Integrate cp_intc support into low-level irq code	2009-05-28 15:17:47 -07:00
gpio.h	davinci: Macro to convert GPIO signal to GPIO pin number	2009-08-26 11:55:54 +03:00
hardware.h	davinci: Move IO device mapping macros from io.h to hardware.h	2009-08-26 10:57:01 +03:00
i2c.h	ARM: DaVinci: i2c setup	2008-09-17 00:31:42 -07:00
io.h	davinci: Move IO device mapping macros from io.h to hardware.h	2009-08-26 10:57:01 +03:00
irqs.h	DaVinci: DM365: Adding entries for DM365 IRQ's	2009-08-26 11:55:58 +03:00
memory.h	davinci: da8xx: Add base DA830/OMAP-L137 SoC support	2009-08-26 10:56:59 +03:00
mmc.h	davinci: MMC platform support	2009-05-26 07:18:16 -07:00
mux.h	Davinci: DM365: Enable DaVinci Key Scan support for DM365 EVM	2009-11-25 10:21:32 -08:00
nand.h	mtd: nand: davinci_nand, 4-bit ECC for smallpage	2009-06-05 17:39:36 +01:00
psc.h	davinci: Add base DA850/OMAP-L138 SoC support	2009-08-26 11:55:44 +03:00
serial.h	davinci: Move IO device mapping macros from io.h to hardware.h	2009-08-26 10:57:01 +03:00
sram.h	davinci: add SRAM allocator	2009-05-28 15:18:13 -07:00
system.h	DaVinci: remove unneeded #include's	2009-11-25 10:21:31 -08:00
time.h	davinci: Add watchdog base address flexibility	2009-05-26 08:20:31 -07:00
timex.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
uncompress.h	davinci: Add support for DA850/OMAP-L138 EVM board	2009-08-26 11:55:45 +03:00
usb.h	DaVinci: rename setup_usb() to davinci_setup_usb()	2009-11-25 10:21:33 -08:00
vmalloc.h	davinci: Move IO device mapping macros from io.h to hardware.h	2009-08-26 10:57:01 +03:00