linux/drivers/platform/x86/Kconfig
Linus Torvalds 899fbc33fd platform-drivers-x86 for v4.19-1
The driver for Silead touchscreen configurations has been renamed
 from silead_dmi to touchscreen_dmi since it starts supporting other
 touchscreens which require some DMI quirks. At the same release cycle
 it gets expanded to cover cases for Chuwi Vi10, ONDA V891W,
 Connect Tablet 9, Onda V820w, and Cube KNote i1101 tablets.
 
 Another bunch of changes is related to Mellanox platform code to allow
 user space to communicate with Mellanox for system control and
 monitoring purposes. The driver notifies user on hotplug device signal
 receiving.
 
 ASUS WMI drivers recognize lid flip action on UX360, and correctly
 toggles airplane mode LED. In addition the keyboard backlight toggle
 gets support.
 
 ThinkPad ACPI driver enables support for calculator key (on at least P52).
 It also has been fixed to support three characters model designators,
 which are used for modern laptops. Earlier the battery, marked as BAT1,
 on ThinkPad laptops has not been configured properly, which is fixed.
 On the opposite the multi-battery configurations now probed correctly.
 
 Dell SMBIOS driver starts working on some Dell servers which do not
 support token interface. The regression with backlight detection has
 also been fixed. In order to support dock mode on some laptops,
 Intel virtual button driver has been fixed. The last but not least
 is the fix to Intel HID driver due to changes in Dell systems that
 prevented to use power button.
 
 The following is an automated git shortlog grouped by driver:
 
 acer-wmi:
  -  Silence "unsupported" message a bit
  -  refactor function has_cap
 
 asus-nb-wmi:
  -  Add keymap entry for lid flip action on UX360
 
 asus-wireless:
  -  Fix uninitialized symbol usage
  -  Toggle airplane mode LED
 
 asus-wmi:
  -  Add keyboard backlight toggle support
  -  Call led hw_changed API on kbd brightness change
 
 dell-laptop:
  -  Fix backlight detection
 
 dell-smbios:
  -  make a function and a pointer static
 
 dell-smbios-base:
  -  Support systems without tokens
 
 dell-smbios-wmi:
  -  make function dell_smbios_wmi_call static
 
 ideapad-laptop:
  -  Add Y520-15IKBM and Y720-15IKBM to no_hw_rfkill
  -  Apply no_hw_rfkill to Y20-15IKBM, too
 
 intel-hid:
  -  Add support for Device Specific Methods
 
 intel_ips:
  -  remove redundant variables slope and offset
 
 intel_pmc_core:
  -  Add CNP SLPS0 debug registers
 
 intel_punit_ipc:
  -  fix build errors
 
 intel-vbtn:
  -  Add support for dock mode detection
 
 mlx-platform:
  -  Fix copy-paste error in mlxplat_init()
  -  Remove unused define
  -  Change mlxreg-io configuration for MSN274x systems
  -  Allow mlxreg-io driver activation for more systems
  -  Add ASIC hotplug device configuration
  -  Add new attribute for mlxreg-io sysfs interfaces
  -  Add mlxreg-fan platform driver activation
  -  Add documentation mlxreg-io sysfs interfaces
  -  Add mlxreg-io platform driver activation
 
 platform/mellanox:
  -  mlxreg-hotplug: Add hotplug hwmon uevent notification
  -  mlxreg-hotplug: Improve mechanism of ASIC health discovery
  -  Use 2-factor allocator calls
  -  Introduce support for Mellanox register access driver
 
 thinkpad_acpi:
  -  Fix multi-battery bug
  -  extend battery quirk coverage
  -  Support battery quirk
  -  Proper model/release matching
  -  Add support for calculator hotkey
 
 toshiba_acpi:
  -  Fix defined but not used build warnings
  -  Update KBD backlight LED on second gen laptops
 
 touchscreen_dmi:
  -  Rename silead_dmi to touchscreen_dmi
  -  Add touchscreen info for the Chuwi Vi10 tablet
  -  Sort entries alphabetically
  -  Rename trekstor entries
  -  Add info for the Cube KNote i1101 tablet
  -  Add info for the Onda V820w tablet
  -  Add info for the "Connect Tablet 9" tablet
  -  Add info for the ONDA V891W Dual OS tablet
 
 wmi:
  -  Do not mix pages and kmalloc
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEhiZOUlnC9oKN3n3AmT3/83c5Sy0FAlt9wVgACgkQmT3/83c5
 Sy3Jdg//WnEJZx7+zEsO+3dJnQGN4Fur6xhP79subRhZPFNTZ+D5vMHC9DL8ZQYx
 U8Kz1ilxCC5HuOo2S1BlzRG+h6ztMSYIFo2H8KRdygOqALEH7hoStPEGYdZcQ0qE
 6SKa4MnRw46UcGPij3f6STPiOjicPaLoUSTXZmi2dbmy6sJZMMJamvnRhezgEgJl
 rA6xvg+tKNBK2jwLpAVfLhy4Btd6LCE4EGgkYdnytOM9ByHLDsTWCZxd/9h7WjPa
 L8Zd8rftrazWF6X2tAhpXtUcMPg/D4lfL5HHaMmL9FioycQ88WqDBZN5sEWdIbaP
 OfaMbcbhCIrrHoMNdq0544IgqRQahX+m3VjSkVf3/Aj5AU0nUJMBWSpGHAs7UCSN
 8i8M2jdpVW7CVxA+4OU2l19udKrQzXutfXXhVYX0B3hKCkH7TBKax+m/ev9n2yvZ
 KoTdSJ/4bB6iGhXF8/MA6H72k0g972d4WXozbTusiBO9grqgU1EIe5bYZ4y+FkJL
 9gtK1xgtDJB7J8U14lpGC+zKhcYn1Mn3Iq4i5HD3sfnKsVGGWJIjRZsDtALD2RKT
 OQe7S8xhQWqsUZFGNflWL+8oHyXOHGD5Q8b/YI92ubriyAzh3I3Ybt/atk20vdmG
 QfKU46suOoOUwcAs00v13oo+9s9GatekXEjGgdRJ14vgzdgx3lc=
 =vRud
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.19-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Andy Shevchenko:

 - The driver for Silead touchscreen configurations has been renamed
   from silead_dmi to touchscreen_dmi since it starts supporting other
   touchscreens which require some DMI quirks

   It also gets expanded to cover cases for Chuwi Vi10, ONDA V891W,
   Connect Tablet 9, Onda V820w, and Cube KNote i1101 tablets.

 - Another bunch of changes is related to Mellanox platform code to
   allow user space to communicate with Mellanox for system control and
   monitoring purposes. The driver notifies user on hotplug device
   signal receiving.

 - ASUS WMI drivers recognize lid flip action on UX360, and correctly
   toggles airplane mode LED. In addition the keyboard backlight toggle
   gets support.

 - ThinkPad ACPI driver enables support for calculator key (on at least
   P52). It also has been fixed to support three characters model
   designators, which are used for modern laptops. Earlier the battery,
   marked as BAT1, on ThinkPad laptops has not been configured properly,
   which is fixed. On the opposite the multi-battery configurations now
   probed correctly.

 - Dell SMBIOS driver starts working on some Dell servers which do not
   support token interface. The regression with backlight detection has
   also been fixed. In order to support dock mode on some laptops, Intel
   virtual button driver has been fixed. The last but not least is the
   fix to Intel HID driver due to changes in Dell systems that prevented
   to use power button.

* tag 'platform-drivers-x86-v4.19-1' of git://git.infradead.org/linux-platform-drivers-x86: (47 commits)
  platform/x86: acer-wmi: Silence "unsupported" message a bit
  platform/x86: intel_punit_ipc: fix build errors
  platform/x86: ideapad: Add Y520-15IKBM and Y720-15IKBM to no_hw_rfkill
  platform/x86: asus-nb-wmi: Add keymap entry for lid flip action on UX360
  platform/x86: acer-wmi: refactor function has_cap
  platform/x86: thinkpad_acpi: Fix multi-battery bug
  platform/x86: thinkpad_acpi: extend battery quirk coverage
  platform/x86: touchscreen_dmi: Add info for the Cube KNote i1101 tablet
  platform/x86: mlx-platform: Fix copy-paste error in mlxplat_init()
  platform/x86: mlx-platform: Remove unused define
  platform/x86: mlx-platform: Change mlxreg-io configuration for MSN274x systems
  Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
  platform/x86: mlx-platform: Allow mlxreg-io driver activation for more systems
  platform/x86: mlx-platform: Add ASIC hotplug device configuration
  platform/mellanox: mlxreg-hotplug: Add hotplug hwmon uevent notification
  platform/mellanox: mlxreg-hotplug: Improve mechanism of ASIC health discovery
  platform/x86: mlx-platform: Add mlxreg-fan platform driver activation
  platform/x86: dell-laptop: Fix backlight detection
  platform/x86: toshiba_acpi: Fix defined but not used build warnings
  platform/x86: thinkpad_acpi: Support battery quirk
  ...
2018-08-22 14:14:15 -07:00

1238 lines
40 KiB
Plaintext

#
# X86 Platform Specific Drivers
#
menuconfig X86_PLATFORM_DEVICES
bool "X86 Platform Specific Device Drivers"
default y
depends on X86
---help---
Say Y here to get to see options for device drivers for various
x86 platforms, including vendor-specific laptop extension drivers.
This option alone does not add any kernel code.
If you say N, all options in this submenu will be skipped and disabled.
if X86_PLATFORM_DEVICES
config ACER_WMI
tristate "Acer WMI Laptop Extras"
depends on ACPI
select LEDS_CLASS
select NEW_LEDS
depends on BACKLIGHT_CLASS_DEVICE
depends on SERIO_I8042
depends on INPUT
depends on RFKILL || RFKILL = n
depends on ACPI_WMI
select INPUT_SPARSEKMAP
# Acer WMI depends on ACPI_VIDEO when ACPI is enabled
select ACPI_VIDEO if ACPI
---help---
This is a driver for newer Acer (and Wistron) laptops. It adds
wireless radio and bluetooth control, and on some laptops,
exposes the mail LED and LCD backlight.
If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
here.
config ACER_WIRELESS
tristate "Acer Wireless Radio Control Driver"
depends on ACPI
depends on INPUT
---help---
The Acer Wireless Radio Control handles the airplane mode hotkey
present on new Acer laptops.
Say Y or M here if you have an Acer notebook with an airplane mode
hotkey.
If you choose to compile this driver as a module the module will be
called acer-wireless.
config ACERHDF
tristate "Acer Aspire One temperature and fan driver"
depends on ACPI && THERMAL
select THERMAL_GOV_BANG_BANG
---help---
This is a driver for Acer Aspire One netbooks. It allows to access
the temperature sensor and to control the fan.
After loading this driver the BIOS is still in control of the fan.
To let the kernel handle the fan, do:
echo -n enabled > /sys/class/thermal/thermal_zone0/mode
For more information about this driver see
<http://piie.net/files/acerhdf_README.txt>
If you have an Acer Aspire One netbook, say Y or M
here.
config ALIENWARE_WMI
tristate "Alienware Special feature control"
depends on ACPI
depends on LEDS_CLASS
depends on NEW_LEDS
depends on ACPI_WMI
---help---
This is a driver for controlling Alienware BIOS driven
features. It exposes an interface for controlling the AlienFX
zones on Alienware machines that don't contain a dedicated AlienFX
USB MCU such as the X51 and X51-R2.
config ASUS_LAPTOP
tristate "Asus Laptop Extras"
depends on ACPI
select LEDS_CLASS
select NEW_LEDS
depends on BACKLIGHT_CLASS_DEVICE
depends on INPUT
depends on RFKILL || RFKILL = n
depends on ACPI_VIDEO || ACPI_VIDEO = n
select INPUT_SPARSEKMAP
select INPUT_POLLDEV
---help---
This is a driver for Asus laptops, Lenovo SL and the Pegatron
Lucid tablet. It may also support some MEDION, JVC or VICTOR
laptops. It makes all the extra buttons generate standard
ACPI events and input events, and on the Lucid the built-in
accelerometer appears as an input device. It also adds
support for video output switching, LCD backlight control,
Bluetooth and Wlan control, and most importantly, allows you
to blink those fancy LEDs.
For more information see <http://acpi4asus.sf.net>.
If you have an ACPI-compatible ASUS laptop, say Y or M here.
#
# The DELL_SMBIOS driver depends on ACPI_WMI and/or DCDBAS if those
# backends are selected. The "depends" line prevents a configuration
# where DELL_SMBIOS=y while either of those dependencies =m.
#
config DELL_SMBIOS
tristate "Dell SMBIOS driver"
depends on DCDBAS || DCDBAS=n
depends on ACPI_WMI || ACPI_WMI=n
---help---
This provides support for the Dell SMBIOS calling interface.
If you have a Dell computer you should enable this option.
Be sure to select at least one backend for it to work properly.
config DELL_SMBIOS_WMI
bool "Dell SMBIOS driver WMI backend"
default y
depends on ACPI_WMI
select DELL_WMI_DESCRIPTOR
depends on DELL_SMBIOS
---help---
This provides an implementation for the Dell SMBIOS calling interface
communicated over ACPI-WMI.
If you have a Dell computer from >2007 you should say Y here.
If you aren't sure and this module doesn't work for your computer
it just won't load.
config DELL_SMBIOS_SMM
bool "Dell SMBIOS driver SMM backend"
default y
depends on DCDBAS
depends on DELL_SMBIOS
---help---
This provides an implementation for the Dell SMBIOS calling interface
communicated over SMI/SMM.
If you have a Dell computer from <=2017 you should say Y here.
If you aren't sure and this module doesn't work for your computer
it just won't load.
config DELL_LAPTOP
tristate "Dell Laptop Extras"
depends on DMI
depends on BACKLIGHT_CLASS_DEVICE
depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on RFKILL || RFKILL = n
depends on SERIO_I8042
depends on DELL_SMBIOS
select POWER_SUPPLY
select LEDS_CLASS
select NEW_LEDS
---help---
This driver adds support for rfkill and backlight control to Dell
laptops (except for some models covered by the Compal driver).
config DELL_WMI
tristate "Dell WMI notifications"
depends on ACPI_WMI
depends on DMI
depends on INPUT
depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on DELL_SMBIOS
select DELL_WMI_DESCRIPTOR
select INPUT_SPARSEKMAP
---help---
Say Y here if you want to support WMI-based hotkeys on Dell laptops.
To compile this driver as a module, choose M here: the module will
be called dell-wmi.
config DELL_WMI_DESCRIPTOR
tristate
depends on ACPI_WMI
config DELL_WMI_AIO
tristate "WMI Hotkeys for Dell All-In-One series"
depends on ACPI_WMI
depends on INPUT
select INPUT_SPARSEKMAP
---help---
Say Y here if you want to support WMI-based hotkeys on Dell
All-In-One machines.
To compile this driver as a module, choose M here: the module will
be called dell-wmi-aio.
config DELL_WMI_LED
tristate "External LED on Dell Business Netbooks"
depends on LEDS_CLASS
depends on ACPI_WMI
help
This adds support for the Latitude 2100 and similar
notebooks that have an external LED.
config DELL_SMO8800
tristate "Dell Latitude freefall driver (ACPI SMO88XX)"
depends on ACPI
---help---
Say Y here if you want to support SMO88XX freefall devices
on Dell Latitude laptops.
To compile this driver as a module, choose M here: the module will
be called dell-smo8800.
config DELL_RBTN
tristate "Dell Airplane Mode Switch driver"
depends on ACPI
depends on INPUT
depends on RFKILL
---help---
Say Y here if you want to support Dell Airplane Mode Switch ACPI
device on Dell laptops. Sometimes it has names: DELLABCE or DELRBTN.
This driver register rfkill device or input hotkey device depending
on hardware type (hw switch slider or keyboard toggle button). For
rfkill devices it receive HW switch events and set correct hard
rfkill state.
To compile this driver as a module, choose M here: the module will
be called dell-rbtn.
config FUJITSU_LAPTOP
tristate "Fujitsu Laptop Extras"
depends on ACPI
depends on INPUT
depends on BACKLIGHT_CLASS_DEVICE
depends on ACPI_VIDEO || ACPI_VIDEO = n
select INPUT_SPARSEKMAP
select LEDS_CLASS
---help---
This is a driver for laptops built by Fujitsu:
* P2xxx/P5xxx/S6xxx/S7xxx series Lifebooks
* Possibly other Fujitsu laptop models
* Tested with S6410 and S7020
It adds support for LCD brightness control and some hotkeys.
If you have a Fujitsu laptop, say Y or M here.
config FUJITSU_TABLET
tristate "Fujitsu Tablet Extras"
depends on ACPI
depends on INPUT
---help---
This is a driver for tablets built by Fujitsu:
* Lifebook P1510/P1610/P1620/Txxxx
* Stylistic ST5xxx
* Possibly other Fujitsu tablet models
It adds support for the panel buttons, docking station detection,
tablet/notebook mode detection for convertible and
orientation detection for docked slates.
If you have a Fujitsu convertible or slate, say Y or M here.
config AMILO_RFKILL
tristate "Fujitsu-Siemens Amilo rfkill support"
depends on RFKILL
depends on SERIO_I8042
---help---
This is a driver for enabling wifi on some Fujitsu-Siemens Amilo
laptops.
config GPD_POCKET_FAN
tristate "GPD Pocket Fan Controller support"
depends on ACPI
depends on THERMAL
---help---
Driver for the GPD Pocket vendor specific FAN02501 ACPI device
which controls the fan speed on the GPD Pocket.
Without this driver the fan on the Pocket will stay off independent
of the CPU temperature. Say Y or M if the kernel may be used on a
GPD pocket.
config TC1100_WMI
tristate "HP Compaq TC1100 Tablet WMI Extras"
depends on !X86_64
depends on ACPI
depends on ACPI_WMI
---help---
This is a driver for the WMI extensions (wireless and bluetooth power
control) of the HP Compaq TC1100 tablet.
config HP_ACCEL
tristate "HP laptop accelerometer"
depends on INPUT && ACPI
depends on SERIO_I8042
select SENSORS_LIS3LV02D
select NEW_LEDS
select LEDS_CLASS
help
This driver provides support for the "Mobile Data Protection System 3D"
or "3D DriveGuard" feature of HP laptops. On such systems the driver
should load automatically (via ACPI alias).
Support for a led indicating disk protection will be provided as
hp::hddprotect. For more information on the feature, refer to
Documentation/misc-devices/lis3lv02d.
To compile this driver as a module, choose M here: the module will
be called hp_accel.
config HP_WIRELESS
tristate "HP wireless button"
depends on ACPI
depends on INPUT
help
This driver provides supports for new HP wireless button for Windows 8.
On such systems the driver should load automatically (via ACPI alias).
To compile this driver as a module, choose M here: the module will
be called hp-wireless.
config HP_WMI
tristate "HP WMI extras"
depends on ACPI_WMI
depends on INPUT
depends on RFKILL || RFKILL = n
select INPUT_SPARSEKMAP
help
Say Y here if you want to support WMI-based hotkeys on HP laptops and
to read data from WMI such as docking or ambient light sensor state.
To compile this driver as a module, choose M here: the module will
be called hp-wmi.
config MSI_LAPTOP
tristate "MSI Laptop Extras"
depends on ACPI
depends on BACKLIGHT_CLASS_DEVICE
depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on RFKILL
depends on INPUT && SERIO_I8042
select INPUT_SPARSEKMAP
---help---
This is a driver for laptops built by MSI (MICRO-STAR
INTERNATIONAL):
MSI MegaBook S270 (MS-1013)
Cytron/TCM/Medion/Tchibo MD96100/SAM2000
It adds support for Bluetooth, WLAN and LCD brightness control.
More information about this driver is available at
<http://0pointer.de/lennart/tchibo.html>.
If you have an MSI S270 laptop, say Y or M here.
config PANASONIC_LAPTOP
tristate "Panasonic Laptop Extras"
depends on INPUT && ACPI
depends on BACKLIGHT_CLASS_DEVICE
select INPUT_SPARSEKMAP
---help---
This driver adds support for access to backlight control and hotkeys
on Panasonic Let's Note laptops.
If you have a Panasonic Let's note laptop (such as the R1(N variant),
R2, R3, R5, T2, W2 and Y2 series), say Y.
config COMPAL_LAPTOP
tristate "Compal (and others) Laptop Extras"
depends on ACPI
depends on BACKLIGHT_CLASS_DEVICE
depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on RFKILL
depends on HWMON
depends on POWER_SUPPLY
---help---
This is a driver for laptops built by Compal, and some models by
other brands (e.g. Dell, Toshiba).
It adds support for rfkill, Bluetooth, WLAN, LCD brightness, hwmon
and battery charging level control.
For a (possibly incomplete) list of supported laptops, please refer
to: Documentation/platform/x86-laptop-drivers.txt
config SONY_LAPTOP
tristate "Sony Laptop Extras"
depends on ACPI
depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on BACKLIGHT_CLASS_DEVICE
depends on INPUT
depends on RFKILL
---help---
This mini-driver drives the SNC and SPIC devices present in the ACPI
BIOS of the Sony Vaio laptops.
It gives access to some extra laptop functionalities like Bluetooth,
screen brightness control, Fn keys and allows powering on/off some
devices.
Read <file:Documentation/laptops/sony-laptop.txt> for more information.
config SONYPI_COMPAT
bool "Sonypi compatibility"
depends on SONY_LAPTOP
---help---
Build the sonypi driver compatibility code into the sony-laptop driver.
config IDEAPAD_LAPTOP
tristate "Lenovo IdeaPad Laptop Extras"
depends on ACPI
depends on RFKILL && INPUT
depends on SERIO_I8042
depends on BACKLIGHT_CLASS_DEVICE
depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on ACPI_WMI || ACPI_WMI = n
select INPUT_SPARSEKMAP
help
This is a driver for Lenovo IdeaPad netbooks contains drivers for
rfkill switch, hotkey, fan control and backlight control.
config SURFACE3_WMI
tristate "Surface 3 WMI Driver"
depends on ACPI_WMI
depends on DMI
depends on INPUT
depends on SPI
---help---
Say Y here if you have a Surface 3.
To compile this driver as a module, choose M here: the module will
be called surface3-wmi.
config THINKPAD_ACPI
tristate "ThinkPad ACPI Laptop Extras"
depends on ACPI
depends on ACPI_BATTERY
depends on INPUT
depends on RFKILL || RFKILL = n
depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on BACKLIGHT_CLASS_DEVICE
select HWMON
select NVRAM
select NEW_LEDS
select LEDS_CLASS
---help---
This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
support for Fn-Fx key combinations, Bluetooth control, video
output switching, ThinkLight control, UltraBay eject and more.
For more information about this driver see
<file:Documentation/laptops/thinkpad-acpi.txt> and
<http://ibm-acpi.sf.net/> .
This driver was formerly known as ibm-acpi.
Extra functionality will be available if the rfkill (CONFIG_RFKILL)
and/or ALSA (CONFIG_SND) subsystems are available in the kernel.
Note that if you want ThinkPad-ACPI to be built-in instead of
modular, ALSA and rfkill will also have to be built-in.
If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
config THINKPAD_ACPI_ALSA_SUPPORT
bool "Console audio control ALSA interface"
depends on THINKPAD_ACPI
depends on SND
depends on SND = y || THINKPAD_ACPI = SND
default y
---help---
Enables monitoring of the built-in console audio output control
(headphone and speakers), which is operated by the mute and (in
some ThinkPad models) volume hotkeys.
If this option is enabled, ThinkPad-ACPI will export an ALSA card
with a single read-only mixer control, which should be used for
on-screen-display feedback purposes by the Desktop Environment.
Optionally, the driver will also allow software control (the
ALSA mixer will be made read-write). Please refer to the driver
documentation for details.
All IBM models have both volume and mute control. Newer Lenovo
models only have mute control (the volume hotkeys are just normal
keys and volume control is done through the main HDA mixer).
config THINKPAD_ACPI_DEBUGFACILITIES
bool "Maintainer debug facilities"
depends on THINKPAD_ACPI
---help---
Enables extra stuff in the thinkpad-acpi which is completely useless
for normal use. Read the driver source to find out what it does.
Say N here, unless you were told by a kernel maintainer to do
otherwise.
config THINKPAD_ACPI_DEBUG
bool "Verbose debug mode"
depends on THINKPAD_ACPI
---help---
Enables extra debugging information, at the expense of a slightly
increase in driver size.
If you are not sure, say N here.
config THINKPAD_ACPI_UNSAFE_LEDS
bool "Allow control of important LEDs (unsafe)"
depends on THINKPAD_ACPI
---help---
Overriding LED state on ThinkPads can mask important
firmware alerts (like critical battery condition), or misled
the user into damaging the hardware (undocking or ejecting
the bay while buses are still active), etc.
LED control on the ThinkPad is write-only (with very few
exceptions on very ancient models), which makes it
impossible to know beforehand if important information will
be lost when one changes LED state.
Users that know what they are doing can enable this option
and the driver will allow control of every LED, including
the ones on the dock stations.
Never enable this option on a distribution kernel.
Say N here, unless you are building a kernel for your own
use, and need to control the important firmware LEDs.
config THINKPAD_ACPI_VIDEO
bool "Video output control support"
depends on THINKPAD_ACPI
default y
---help---
Allows the thinkpad_acpi driver to provide an interface to control
the various video output ports.
This feature often won't work well, depending on ThinkPad model,
display state, video output devices in use, whether there is a X
server running, phase of the moon, and the current mood of
Schroedinger's cat. If you can use X.org's RandR to control
your ThinkPad's video output ports instead of this feature,
don't think twice: do it and say N here to save memory and avoid
bad interactions with X.org.
NOTE: access to this feature is limited to processes with the
CAP_SYS_ADMIN capability, to avoid local DoS issues in platforms
where it interacts badly with X.org.
If you are not sure, say Y here but do try to check if you could
be using X.org RandR instead.
config THINKPAD_ACPI_HOTKEY_POLL
bool "Support NVRAM polling for hot keys"
depends on THINKPAD_ACPI
default y
---help---
Some thinkpad models benefit from NVRAM polling to detect a few of
the hot key press events. If you know your ThinkPad model does not
need to do NVRAM polling to support any of the hot keys you use,
unselecting this option will save about 1kB of memory.
ThinkPads T40 and newer, R52 and newer, and X31 and newer are
unlikely to need NVRAM polling in their latest BIOS versions.
NVRAM polling can detect at most the following keys: ThinkPad/Access
IBM, Zoom, Switch Display (fn+F7), ThinkLight, Volume up/down/mute,
Brightness up/down, Display Expand (fn+F8), Hibernate (fn+F12).
If you are not sure, say Y here. The driver enables polling only if
it is strictly necessary to do so.
config SENSORS_HDAPS
tristate "Thinkpad Hard Drive Active Protection System (hdaps)"
depends on INPUT
select INPUT_POLLDEV
help
This driver provides support for the IBM Hard Drive Active Protection
System (hdaps), which provides an accelerometer and other misc. data.
ThinkPads starting with the R50, T41, and X40 are supported. The
accelerometer data is readable via sysfs.
This driver also provides an absolute input class device, allowing
the laptop to act as a pinball machine-esque joystick.
If your ThinkPad is not recognized by the driver, please update to latest
BIOS. This is especially the case for some R52 ThinkPads.
Say Y here if you have an applicable laptop and want to experience
the awesome power of hdaps.
config INTEL_MENLOW
tristate "Thermal Management driver for Intel menlow platform"
depends on ACPI_THERMAL
select THERMAL
---help---
ACPI thermal management enhancement driver on
Intel Menlow platform.
If unsure, say N.
config EEEPC_LAPTOP
tristate "Eee PC Hotkey Driver"
depends on ACPI
depends on INPUT
depends on RFKILL || RFKILL = n
depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on HOTPLUG_PCI
depends on BACKLIGHT_CLASS_DEVICE
select HWMON
select LEDS_CLASS
select NEW_LEDS
select INPUT_SPARSEKMAP
---help---
This driver supports the Fn-Fx keys on Eee PC laptops.
It also gives access to some extra laptop functionalities like
Bluetooth, backlight and allows powering on/off some other
devices.
If you have an Eee PC laptop, say Y or M here. If this driver
doesn't work on your Eee PC, try eeepc-wmi instead.
config ASUS_WMI
tristate "ASUS WMI Driver"
depends on ACPI_WMI
depends on INPUT
depends on HWMON
depends on BACKLIGHT_CLASS_DEVICE
depends on RFKILL || RFKILL = n
depends on HOTPLUG_PCI
depends on ACPI_VIDEO || ACPI_VIDEO = n
select INPUT_SPARSEKMAP
select LEDS_CLASS
select NEW_LEDS
---help---
Say Y here if you have a WMI aware Asus laptop (like Eee PCs or new
Asus Notebooks).
To compile this driver as a module, choose M here: the module will
be called asus-wmi.
config ASUS_NB_WMI
tristate "Asus Notebook WMI Driver"
depends on ASUS_WMI
depends on SERIO_I8042 || SERIO_I8042 = n
---help---
This is a driver for newer Asus notebooks. It adds extra features
like wireless radio and bluetooth control, leds, hotkeys, backlight...
For more information, see
<file:Documentation/ABI/testing/sysfs-platform-asus-wmi>
If you have an ACPI-WMI compatible Asus Notebook, say Y or M
here.
config EEEPC_WMI
tristate "Eee PC WMI Driver"
depends on ASUS_WMI
---help---
This is a driver for newer Eee PC laptops. It adds extra features
like wireless radio and bluetooth control, leds, hotkeys, backlight...
For more information, see
<file:Documentation/ABI/testing/sysfs-platform-asus-wmi>
If you have an ACPI-WMI compatible Eee PC laptop (>= 1000), say Y or M
here.
config ASUS_WIRELESS
tristate "Asus Wireless Radio Control Driver"
depends on ACPI
depends on INPUT
select NEW_LEDS
select LEDS_CLASS
---help---
The Asus Wireless Radio Control handles the airplane mode hotkey
present on some Asus laptops.
Say Y or M here if you have an ASUS notebook with an airplane mode
hotkey.
If you choose to compile this driver as a module the module will be
called asus-wireless.
config ACPI_WMI
tristate "WMI"
depends on ACPI
help
This driver adds support for the ACPI-WMI (Windows Management
Instrumentation) mapper device (PNP0C14) found on some systems.
ACPI-WMI is a proprietary extension to ACPI to expose parts of the
ACPI firmware to userspace - this is done through various vendor
defined methods and data blocks in a PNP0C14 device, which are then
made available for userspace to call.
The implementation of this in Linux currently only exposes this to
other kernel space drivers.
This driver is a required dependency to build the firmware specific
drivers needed on many machines, including Acer and HP laptops.
It is safe to enable this driver even if your DSDT doesn't define
any ACPI-WMI devices.
config WMI_BMOF
tristate "WMI embedded Binary MOF driver"
depends on ACPI_WMI
default ACPI_WMI
---help---
Say Y here if you want to be able to read a firmware-embedded
WMI Binary MOF data. Using this requires userspace tools and may be
rather tedious.
To compile this driver as a module, choose M here: the module will
be called wmi-bmof.
config INTEL_WMI_THUNDERBOLT
tristate "Intel WMI thunderbolt force power driver"
depends on ACPI_WMI
---help---
Say Y here if you want to be able to use the WMI interface on select
systems to force the power control of Intel Thunderbolt controllers.
This is useful for updating the firmware when devices are not plugged
into the controller.
To compile this driver as a module, choose M here: the module will
be called intel-wmi-thunderbolt.
config MSI_WMI
tristate "MSI WMI extras"
depends on ACPI_WMI
depends on INPUT
depends on BACKLIGHT_CLASS_DEVICE
depends on ACPI_VIDEO || ACPI_VIDEO = n
select INPUT_SPARSEKMAP
help
Say Y here if you want to support WMI-based hotkeys on MSI laptops.
To compile this driver as a module, choose M here: the module will
be called msi-wmi.
config PEAQ_WMI
tristate "PEAQ 2-in-1 WMI hotkey driver"
depends on ACPI_WMI
depends on INPUT
select INPUT_POLLDEV
help
Say Y here if you want to support WMI-based hotkeys on PEAQ 2-in-1s.
config TOPSTAR_LAPTOP
tristate "Topstar Laptop Extras"
depends on ACPI
depends on INPUT
select INPUT_SPARSEKMAP
select LEDS_CLASS
select NEW_LEDS
---help---
This driver adds support for hotkeys found on Topstar laptops.
If you have a Topstar laptop, say Y or M here.
config ACPI_TOSHIBA
tristate "Toshiba Laptop Extras"
depends on ACPI
depends on ACPI_WMI
select LEDS_CLASS
select NEW_LEDS
depends on BACKLIGHT_CLASS_DEVICE
depends on INPUT
depends on SERIO_I8042 || SERIO_I8042 = n
depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on RFKILL || RFKILL = n
depends on IIO
select INPUT_POLLDEV
select INPUT_SPARSEKMAP
---help---
This driver adds support for access to certain system settings
on "legacy free" Toshiba laptops. These laptops can be recognized by
their lack of a BIOS setup menu and APM support.
On these machines, all system configuration is handled through the
ACPI. This driver is required for access to controls not covered
by the general ACPI drivers, such as LCD brightness, video output,
etc.
This driver differs from the non-ACPI Toshiba laptop driver (located
under "Processor type and features") in several aspects.
Configuration is accessed by reading and writing text files in the
/proc tree instead of by program interface to /dev. Furthermore, no
power management functions are exposed, as those are handled by the
general ACPI drivers.
More information about this driver is available at
<http://memebeam.org/toys/ToshibaAcpiDriver>.
If you have a legacy free Toshiba laptop (such as the Libretto L1
series), say Y.
config TOSHIBA_BT_RFKILL
tristate "Toshiba Bluetooth RFKill switch support"
depends on ACPI
depends on RFKILL || RFKILL = n
---help---
This driver adds support for Bluetooth events for the RFKill
switch on modern Toshiba laptops with full ACPI support and
an RFKill switch.
This driver handles RFKill events for the TOS6205 Bluetooth,
and re-enables it when the switch is set back to the 'on'
position.
If you have a modern Toshiba laptop with a Bluetooth and an
RFKill switch (such as the Portege R500), say Y.
config TOSHIBA_HAPS
tristate "Toshiba HDD Active Protection Sensor"
depends on ACPI
---help---
This driver adds support for the built-in accelerometer
found on recent Toshiba laptops equipped with HID TOS620A
device.
This driver receives ACPI notify events 0x80 when the sensor
detects a sudden move or a harsh vibration, as well as an
ACPI notify event 0x81 whenever the movement or vibration has
been stabilized.
Also provides sysfs entries to get/set the desired protection
level and resetting the HDD protection interface.
If you have a recent Toshiba laptop with a built-in accelerometer
device, say Y.
config TOSHIBA_WMI
tristate "Toshiba WMI Hotkeys Driver (EXPERIMENTAL)"
depends on ACPI_WMI
depends on INPUT
select INPUT_SPARSEKMAP
---help---
This driver adds hotkey monitoring support to some Toshiba models
that manage the hotkeys via WMI events.
WARNING: This driver is incomplete as it lacks a proper keymap and the
*notify function only prints the ACPI event type value. Be warned that
you will need to provide some information if you have a Toshiba model
with WMI event hotkeys and want to help with the development of this
driver.
If you have a WMI-based hotkeys Toshiba laptop, say Y or M here.
config ACPI_CMPC
tristate "CMPC Laptop Extras"
depends on ACPI && INPUT
depends on RFKILL || RFKILL=n
select BACKLIGHT_CLASS_DEVICE
help
Support for Intel Classmate PC ACPI devices, including some
keys as input device, backlight device, tablet and accelerometer
devices.
config INTEL_CHT_INT33FE
tristate "Intel Cherry Trail ACPI INT33FE Driver"
depends on X86 && ACPI && I2C && REGULATOR
depends on CHARGER_BQ24190=y || (CHARGER_BQ24190=m && m)
---help---
This driver add support for the INT33FE ACPI device found on
some Intel Cherry Trail devices.
The INT33FE ACPI device has a CRS table with I2cSerialBusV2
resources for 3 devices: Maxim MAX17047 Fuel Gauge Controller,
FUSB302 USB Type-C Controller and PI3USB30532 USB switch.
This driver instantiates i2c-clients for these, so that standard
i2c drivers for these chips can bind to the them.
If you enable this driver it is advised to also select
CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m.
config INTEL_INT0002_VGPIO
tristate "Intel ACPI INT0002 Virtual GPIO driver"
depends on GPIOLIB && ACPI
select GPIOLIB_IRQCHIP
---help---
Some peripherals on Bay Trail and Cherry Trail platforms signal a
Power Management Event (PME) to the Power Management Controller (PMC)
to wakeup the system. When this happens software needs to explicitly
clear the PME bus 0 status bit in the GPE0a_STS register to avoid an
IRQ storm on IRQ 9.
This is modelled in ACPI through the INT0002 ACPI device, which is
called a "Virtual GPIO controller" in ACPI because it defines the
event handler to call when the PME triggers through _AEI and _L02
methods as would be done for a real GPIO interrupt in ACPI.
To compile this driver as a module, choose M here: the module will
be called intel_int0002_vgpio.
config INTEL_HID_EVENT
tristate "INTEL HID Event"
depends on ACPI
depends on INPUT
select INPUT_SPARSEKMAP
help
This driver provides support for the Intel HID Event hotkey interface.
Some laptops require this driver for hotkey support.
To compile this driver as a module, choose M here: the module will
be called intel_hid.
config INTEL_VBTN
tristate "INTEL VIRTUAL BUTTON"
depends on ACPI
depends on INPUT
select INPUT_SPARSEKMAP
help
This driver provides support for the Intel Virtual Button interface.
Some laptops require this driver for power button support.
To compile this driver as a module, choose M here: the module will
be called intel_vbtn.
config INTEL_SCU_IPC
bool "Intel SCU IPC Support"
depends on X86_INTEL_MID
default y
---help---
IPC is used to bridge the communications between kernel and SCU on
some embedded Intel x86 platforms. This is not needed for PC-type
machines.
config INTEL_SCU_IPC_UTIL
tristate "Intel SCU IPC utility driver"
depends on INTEL_SCU_IPC
default y
---help---
The IPC Util driver provides an interface with the SCU enabling
low level access for debug work and updating the firmware. Say
N unless you will be doing this on an Intel MID platform.
config INTEL_MID_POWER_BUTTON
tristate "power button driver for Intel MID platforms"
depends on INTEL_SCU_IPC && INPUT
help
This driver handles the power button on the Intel MID platforms.
If unsure, say N.
config INTEL_MFLD_THERMAL
tristate "Thermal driver for Intel Medfield platform"
depends on MFD_INTEL_MSIC && THERMAL
help
Say Y here to enable thermal driver support for the Intel Medfield
platform.
config INTEL_IPS
tristate "Intel Intelligent Power Sharing"
depends on ACPI
---help---
Intel Calpella platforms support dynamic power sharing between the
CPU and GPU, maximizing performance in a given TDP. This driver,
along with the CPU frequency and i915 drivers, provides that
functionality. If in doubt, say Y here; it will only load on
supported platforms.
config INTEL_IMR
bool "Intel Isolated Memory Region support"
depends on X86_INTEL_QUARK && IOSF_MBI
---help---
This option provides a means to manipulate Isolated Memory Regions.
IMRs are a set of registers that define read and write access masks
to prohibit certain system agents from accessing memory with 1 KiB
granularity.
IMRs make it possible to control read/write access to an address
by hardware agents inside the SoC. Read and write masks can be
defined for:
- eSRAM flush
- Dirty CPU snoop (write only)
- RMU access
- PCI Virtual Channel 0/Virtual Channel 1
- SMM mode
- Non SMM mode
Quark contains a set of eight IMR registers and makes use of those
registers during its bootup process.
If you are running on a Galileo/Quark say Y here.
config INTEL_PMC_CORE
tristate "Intel PMC Core driver"
depends on PCI
---help---
The Intel Platform Controller Hub for Intel Core SoCs provides access
to Power Management Controller registers via a PCI interface. This
driver can utilize debugging capabilities and supported features as
exposed by the Power Management Controller.
Supported features:
- SLP_S0_RESIDENCY counter
- PCH IP Power Gating status
- LTR Ignore
- MPHY/PLL gating status (Sunrisepoint PCH only)
config IBM_RTL
tristate "Device driver to enable PRTL support"
depends on PCI
---help---
Enable support for IBM Premium Real Time Mode (PRTM).
This module will allow you the enter and exit PRTM in the BIOS via
sysfs on platforms that support this feature. System in PRTM will
not receive CPU-generated SMIs for recoverable errors. Use of this
feature without proper support may void your hardware warranty.
If the proper BIOS support is found the driver will load and create
/sys/devices/system/ibm_rtl/. The "state" variable will indicate
whether or not the BIOS is in PRTM.
state = 0 (BIOS SMIs on)
state = 1 (BIOS SMIs off)
config XO1_RFKILL
tristate "OLPC XO-1 software RF kill switch"
depends on OLPC || COMPILE_TEST
depends on RFKILL
---help---
Support for enabling/disabling the WLAN interface on the OLPC XO-1
laptop.
config XO15_EBOOK
tristate "OLPC XO-1.5 ebook switch"
depends on OLPC || COMPILE_TEST
depends on ACPI && INPUT
---help---
Support for the ebook switch on the OLPC XO-1.5 laptop.
This switch is triggered as the screen is rotated and folded down to
convert the device into ebook form.
config SAMSUNG_LAPTOP
tristate "Samsung Laptop driver"
depends on RFKILL || RFKILL = n
depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on BACKLIGHT_CLASS_DEVICE
select LEDS_CLASS
select NEW_LEDS
---help---
This module implements a driver for a wide range of different
Samsung laptops. It offers control over the different
function keys, wireless LED, LCD backlight level.
It may also provide some sysfs files described in
<file:Documentation/ABI/testing/sysfs-driver-samsung-laptop>
To compile this driver as a module, choose M here: the module
will be called samsung-laptop.
config MXM_WMI
tristate "WMI support for MXM Laptop Graphics"
depends on ACPI_WMI
---help---
MXM is a standard for laptop graphics cards, the WMI interface
is required for switchable nvidia graphics machines
config INTEL_OAKTRAIL
tristate "Intel Oaktrail Platform Extras"
depends on ACPI
depends on ACPI_VIDEO || ACPI_VIDEO = n
depends on RFKILL && BACKLIGHT_CLASS_DEVICE && ACPI
---help---
Intel Oaktrail platform need this driver to provide interfaces to
enable/disable the Camera, WiFi, BT etc. devices. If in doubt, say Y
here; it will only load on supported platforms.
config SAMSUNG_Q10
tristate "Samsung Q10 Extras"
depends on ACPI
select BACKLIGHT_CLASS_DEVICE
---help---
This driver provides support for backlight control on Samsung Q10
and related laptops, including Dell Latitude X200.
config APPLE_GMUX
tristate "Apple Gmux Driver"
depends on ACPI
depends on PNP
depends on BACKLIGHT_CLASS_DEVICE
depends on BACKLIGHT_APPLE=n || BACKLIGHT_APPLE
depends on ACPI_VIDEO=n || ACPI_VIDEO
---help---
This driver provides support for the gmux device found on many
Apple laptops, which controls the display mux for the hybrid
graphics as well as the backlight. Currently only backlight
control is supported by the driver.
config INTEL_RST
tristate "Intel Rapid Start Technology Driver"
depends on ACPI
---help---
This driver provides support for modifying paramaters on systems
equipped with Intel's Rapid Start Technology. When put in an ACPI
sleep state, these devices will wake after either a configured
timeout or when the system battery reaches a critical state,
automatically copying memory contents to disk. On resume, the
firmware will copy the memory contents back to RAM and resume the OS
as usual.
config INTEL_SMARTCONNECT
tristate "Intel Smart Connect disabling driver"
depends on ACPI
---help---
Intel Smart Connect is a technology intended to permit devices to
update state by resuming for a short period of time at regular
intervals. If a user enables this functionality under Windows and
then reboots into Linux, the system may remain configured to resume
on suspend. In the absence of any userspace to support it, the system
will then remain awake until something triggers another suspend.
This driver checks to determine whether the device has Intel Smart
Connect enabled, and if so disables it.
config PVPANIC
tristate "pvpanic device support"
depends on ACPI
---help---
This driver provides support for the pvpanic device. pvpanic is
a paravirtualized device provided by QEMU; it lets a virtual machine
(guest) communicate panic events to the host.
config INTEL_PMC_IPC
tristate "Intel PMC IPC Driver"
depends on ACPI
---help---
This driver provides support for PMC control on some Intel platforms.
The PMC is an ARC processor which defines IPC commands for communication
with other entities in the CPU.
config INTEL_BXTWC_PMIC_TMU
tristate "Intel BXT Whiskey Cove TMU Driver"
depends on REGMAP
depends on INTEL_SOC_PMIC_BXTWC && INTEL_PMC_IPC
---help---
Select this driver to use Intel BXT Whiskey Cove PMIC TMU feature.
This driver enables the alarm wakeup functionality in the TMU unit
of Whiskey Cove PMIC.
config SURFACE_PRO3_BUTTON
tristate "Power/home/volume buttons driver for Microsoft Surface Pro 3/4 tablet"
depends on ACPI && INPUT
---help---
This driver handles the power/home/volume buttons on the Microsoft Surface Pro 3/4 tablet.
config SURFACE_3_BUTTON
tristate "Power/home/volume buttons driver for Microsoft Surface 3 tablet"
depends on ACPI && KEYBOARD_GPIO && I2C
---help---
This driver handles the power/home/volume buttons on the Microsoft Surface 3 tablet.
config INTEL_PUNIT_IPC
tristate "Intel P-Unit IPC Driver"
---help---
This driver provides support for Intel P-Unit Mailbox IPC mechanism,
which is used to bridge the communications between kernel and P-Unit.
config INTEL_TELEMETRY
tristate "Intel SoC Telemetry Driver"
depends on INTEL_PMC_IPC && INTEL_PUNIT_IPC && X86_64
---help---
This driver provides interfaces to configure and use
telemetry for INTEL SoC from APL onwards. It is also
used to get various SoC events and parameters
directly via debugfs files. Various tools may use
this interface for SoC state monitoring.
config MLX_PLATFORM
tristate "Mellanox Technologies platform support"
depends on I2C && REGMAP
---help---
This option enables system support for the Mellanox Technologies
platform. The Mellanox systems provide data center networking
solutions based on Virtual Protocol Interconnect (VPI) technology
enable seamless connectivity to 56/100Gb/s InfiniBand or 10/40/56GbE
connection.
If you have a Mellanox system, say Y or M here.
config INTEL_TURBO_MAX_3
bool "Intel Turbo Boost Max Technology 3.0 enumeration driver"
depends on X86_64 && SCHED_MC_PRIO
---help---
This driver reads maximum performance ratio of each CPU and set up
the scheduler priority metrics. In this way scheduler can prefer
CPU with higher performance to schedule tasks.
This driver is only required when the system is not using Hardware
P-States (HWP). In HWP mode, priority can be read from ACPI tables.
config TOUCHSCREEN_DMI
bool "DMI based touchscreen configuration info"
depends on ACPI && DMI && I2C=y && TOUCHSCREEN_SILEAD
---help---
Certain ACPI based tablets with e.g. Silead or Chipone touchscreens
do not have enough data in ACPI tables for the touchscreen driver to
handle the touchscreen properly, as OEMs expect the data to be baked
into the tablet model specific version of the driver shipped with the
the OS-image for the device. This option supplies the missing info.
Enable this for x86 tablets with Silead or Chipone touchscreens.
config INTEL_CHTDC_TI_PWRBTN
tristate "Intel Cherry Trail Dollar Cove TI power button driver"
depends on INTEL_SOC_PMIC_CHTDC_TI
depends on INPUT
---help---
This option adds a power button driver driver for Dollar Cove TI
PMIC on Intel Cherry Trail devices.
To compile this driver as a module, choose M here: the module
will be called intel_chtdc_ti_pwrbtn.
config I2C_MULTI_INSTANTIATE
tristate "I2C multi instantiate pseudo device driver"
depends on I2C && ACPI
help
Some ACPI-based systems list multiple i2c-devices in a single ACPI
firmware-node. This driver will instantiate separate i2c-clients
for each device in the firmware-node.
To compile this driver as a module, choose M here: the module
will be called i2c-multi-instantiate.
endif # X86_PLATFORM_DEVICES
config PMC_ATOM
def_bool y
depends on PCI
select COMMON_CLK