mirror of
https://github.com/torvalds/linux.git
synced 2024-12-14 15:13:52 +00:00
be3f4121aa
Remove FLAG_DTC3181E. It was used to suppress a final Arbitration Lost (SEL asserted) test that isn't actually needed. The test was suppressed because it causes problems for DTC436 and DTC536 chips. It takes place after the host wins arbitration, so SEL has been asserted. These chips can't seem to tell whether it was the host or another bus device that did so. This questionable final test appears in a flow chart in an early NCR5380 datasheet. It was removed from later documents like the DP5380 datasheet. By the time this final test takes place, the driver has already tested the Arbitration Lost bit several times. The first test happens 3 us after BUS FREE (or longer due to register access delays). The protocol requires that a device stop signalling within 1.8 us after BUS FREE unless it won arbitration, in which case it must assert SEL, which is detected 1.2 us later by the first Arbitration Lost test. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ondrej Zary <linux@rainbow-software.org> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
164 lines
4.1 KiB
C
164 lines
4.1 KiB
C
/*
|
|
dmx3191d.c - driver for the Domex DMX3191D SCSI card.
|
|
Copyright (C) 2000 by Massimo Piccioni <dafastidio@libero.it>
|
|
Portions Copyright (C) 2004 by Christoph Hellwig <hch@lst.de>
|
|
|
|
Based on the generic NCR5380 driver by Drew Eckhardt et al.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/interrupt.h>
|
|
#include <asm/io.h>
|
|
|
|
#include <scsi/scsi_host.h>
|
|
|
|
/*
|
|
* Definitions for the generic 5380 driver.
|
|
*/
|
|
|
|
#define DONT_USE_INTR
|
|
|
|
#define NCR5380_read(reg) inb(instance->io_port + reg)
|
|
#define NCR5380_write(reg, value) outb(value, instance->io_port + reg)
|
|
|
|
#define NCR5380_implementation_fields /* none */
|
|
|
|
#include "NCR5380.h"
|
|
#include "NCR5380.c"
|
|
|
|
#define DMX3191D_DRIVER_NAME "dmx3191d"
|
|
#define DMX3191D_REGION_LEN 8
|
|
|
|
|
|
static struct scsi_host_template dmx3191d_driver_template = {
|
|
.module = THIS_MODULE,
|
|
.proc_name = DMX3191D_DRIVER_NAME,
|
|
.name = "Domex DMX3191D",
|
|
.info = NCR5380_info,
|
|
.queuecommand = NCR5380_queue_command,
|
|
.eh_abort_handler = NCR5380_abort,
|
|
.eh_bus_reset_handler = NCR5380_bus_reset,
|
|
.can_queue = 32,
|
|
.this_id = 7,
|
|
.sg_tablesize = SG_ALL,
|
|
.cmd_per_lun = 2,
|
|
.use_clustering = DISABLE_CLUSTERING,
|
|
};
|
|
|
|
static int dmx3191d_probe_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
struct Scsi_Host *shost;
|
|
unsigned long io;
|
|
int error = -ENODEV;
|
|
|
|
if (pci_enable_device(pdev))
|
|
goto out;
|
|
|
|
io = pci_resource_start(pdev, 0);
|
|
if (!request_region(io, DMX3191D_REGION_LEN, DMX3191D_DRIVER_NAME)) {
|
|
printk(KERN_ERR "dmx3191: region 0x%lx-0x%lx already reserved\n",
|
|
io, io + DMX3191D_REGION_LEN);
|
|
goto out_disable_device;
|
|
}
|
|
|
|
shost = scsi_host_alloc(&dmx3191d_driver_template,
|
|
sizeof(struct NCR5380_hostdata));
|
|
if (!shost)
|
|
goto out_release_region;
|
|
shost->io_port = io;
|
|
|
|
/* This card does not seem to raise an interrupt on pdev->irq.
|
|
* Steam-powered SCSI controllers run without an IRQ anyway.
|
|
*/
|
|
shost->irq = NO_IRQ;
|
|
|
|
error = NCR5380_init(shost, FLAG_NO_PSEUDO_DMA);
|
|
if (error)
|
|
goto out_host_put;
|
|
|
|
NCR5380_maybe_reset_bus(shost);
|
|
|
|
pci_set_drvdata(pdev, shost);
|
|
|
|
error = scsi_add_host(shost, &pdev->dev);
|
|
if (error)
|
|
goto out_exit;
|
|
|
|
scsi_scan_host(shost);
|
|
return 0;
|
|
|
|
out_exit:
|
|
NCR5380_exit(shost);
|
|
out_host_put:
|
|
scsi_host_put(shost);
|
|
out_release_region:
|
|
release_region(io, DMX3191D_REGION_LEN);
|
|
out_disable_device:
|
|
pci_disable_device(pdev);
|
|
out:
|
|
return error;
|
|
}
|
|
|
|
static void dmx3191d_remove_one(struct pci_dev *pdev)
|
|
{
|
|
struct Scsi_Host *shost = pci_get_drvdata(pdev);
|
|
unsigned long io = shost->io_port;
|
|
|
|
scsi_remove_host(shost);
|
|
|
|
NCR5380_exit(shost);
|
|
scsi_host_put(shost);
|
|
release_region(io, DMX3191D_REGION_LEN);
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
static struct pci_device_id dmx3191d_pci_tbl[] = {
|
|
{PCI_VENDOR_ID_DOMEX, PCI_DEVICE_ID_DOMEX_DMX3191D,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, dmx3191d_pci_tbl);
|
|
|
|
static struct pci_driver dmx3191d_pci_driver = {
|
|
.name = DMX3191D_DRIVER_NAME,
|
|
.id_table = dmx3191d_pci_tbl,
|
|
.probe = dmx3191d_probe_one,
|
|
.remove = dmx3191d_remove_one,
|
|
};
|
|
|
|
static int __init dmx3191d_init(void)
|
|
{
|
|
return pci_register_driver(&dmx3191d_pci_driver);
|
|
}
|
|
|
|
static void __exit dmx3191d_exit(void)
|
|
{
|
|
pci_unregister_driver(&dmx3191d_pci_driver);
|
|
}
|
|
|
|
module_init(dmx3191d_init);
|
|
module_exit(dmx3191d_exit);
|
|
|
|
MODULE_AUTHOR("Massimo Piccioni <dafastidio@libero.it>");
|
|
MODULE_DESCRIPTION("Domex DMX3191D SCSI driver");
|
|
MODULE_LICENSE("GPL");
|