linux/arch/arm/mach-omap2/pm.h
Paul Walmsley 856c3c5b28 ARM: OMAP3: PM: apply part of the erratum i582 workaround
On OMAP34xx/35xx, and OMAP36xx chips with ES < 1.2, if the PER
powerdomain goes to OSWR or OFF while CORE stays at CSWR or ON, or if,
upon chip wakeup from OSWR or OFF, the CORE powerdomain goes ON before
PER, the UART3/4 FIFOs and McBSP2/3 SIDETONE memories will be
unusable.  This is erratum i582 in the OMAP36xx Silicon Errata
document.

This patch implements one of several parts of the workaround: the
addition of the wakeup dependency between the PER and WKUP
clockdomains, such that PER will wake up at the same time CORE_L3
does.

This is not a complete workaround.  For it to be complete:

1. the PER powerdomain's next power state must not be set to OSWR or
   OFF if the CORE powerdomain's next power state is set to CSWR or
   ON;

2. the UART3/4 FIFO and McBSP2/3 SIDETONE loopback tests should be run
   if the LASTPOWERSTATEENTERED bits for PER and CORE indicate that
   PER went OFF while CORE stayed on.  If loopback tests fail, then
   those devices will be unusable until PER and CORE can undergo a
   transition from ON to OSWR/OFF and back ON.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-10-22 13:35:17 -07:00

133 lines
3.3 KiB
C

/*
* OMAP2/3 Power Management Routines
*
* Copyright (C) 2008 Nokia Corporation
* Jouni Hogander
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_PM_H
#define __ARCH_ARM_MACH_OMAP2_PM_H
#include <linux/err.h>
#include "powerdomain.h"
#ifdef CONFIG_CPU_IDLE
extern int __init omap3_idle_init(void);
extern int __init omap4_idle_init(void);
#else
static inline int omap3_idle_init(void)
{
return 0;
}
static inline int omap4_idle_init(void)
{
return 0;
}
#endif
extern void *omap3_secure_ram_storage;
extern void omap3_pm_off_mode_enable(int);
extern void omap_sram_idle(void);
extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused);
extern int (*omap_pm_suspend)(void);
#if defined(CONFIG_PM_OPP)
extern int omap3_opp_init(void);
extern int omap4_opp_init(void);
#else
static inline int omap3_opp_init(void)
{
return -EINVAL;
}
static inline int omap4_opp_init(void)
{
return -EINVAL;
}
#endif
extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
#ifdef CONFIG_PM_DEBUG
extern u32 enable_off_mode;
#else
#define enable_off_mode 0
#endif
#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
#else
#define pm_dbg_update_time(pwrdm, prev) do {} while (0);
#endif /* CONFIG_PM_DEBUG */
/* 24xx */
extern void omap24xx_idle_loop_suspend(void);
extern unsigned int omap24xx_idle_loop_suspend_sz;
extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
void __iomem *sdrc_power);
extern unsigned int omap24xx_cpu_suspend_sz;
/* 3xxx */
extern void omap34xx_cpu_suspend(int save_state);
/* omap3_do_wfi function pointer and size, for copy to SRAM */
extern void omap3_do_wfi(void);
extern unsigned int omap3_do_wfi_sz;
/* ... and its pointer from SRAM after copy */
extern void (*omap3_do_wfi_sram)(void);
/* save_secure_ram_context function pointer and size, for copy to SRAM */
extern int save_secure_ram_context(u32 *addr);
extern unsigned int save_secure_ram_context_sz;
extern void omap3_save_scratchpad_contents(void);
#define PM_RTA_ERRATUM_i608 (1 << 0)
#define PM_SDRC_WAKEUP_ERRATUM_i583 (1 << 1)
#define PM_PER_MEMORIES_ERRATUM_i582 (1 << 2)
#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
extern u16 pm34xx_errata;
#define IS_PM34XX_ERRATUM(id) (pm34xx_errata & (id))
extern void enable_omap3630_toggle_l2_on_restore(void);
#else
#define IS_PM34XX_ERRATUM(id) 0
static inline void enable_omap3630_toggle_l2_on_restore(void) { }
#endif /* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */
#ifdef CONFIG_POWER_AVS_OMAP
extern int omap_devinit_smartreflex(void);
extern void omap_enable_smartreflex_on_init(void);
#else
static inline int omap_devinit_smartreflex(void)
{
return -EINVAL;
}
static inline void omap_enable_smartreflex_on_init(void) {}
#endif
#ifdef CONFIG_TWL4030_CORE
extern int omap3_twl_init(void);
extern int omap4_twl_init(void);
extern int omap3_twl_set_sr_bit(bool enable);
#else
static inline int omap3_twl_init(void)
{
return -EINVAL;
}
static inline int omap4_twl_init(void)
{
return -EINVAL;
}
#endif
#endif