mirror of
https://github.com/torvalds/linux.git
synced 2024-12-05 02:23:16 +00:00
11801e9de2
Most notable here is probably the addition of basic support for the BCM2835, an SoC used in some of the Roku 2 players as well as the much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren. It's still early days on mainline support, with just the basics working. But it has to start somewhere! Beyond that there's some conversions of clock infrastructure on tegra to common clock, misc updates for several other platforms, and OMAP now has its own bus (under drivers/bus) to manage its devices through. This branch adds two new directories outside of arch/arm: drivers/irqchip for new irq controllers, and drivers/bus for the above OMAP bus. It's expected that some of the other platforms will migrate parts of their platforms to those directories over time as well. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJQaO2SAAoJEIwa5zzehBx3TBIQAJYc+vpAqiv8MLQ1XV3cLiIP X57fxM9u1A+uXpXsiCTGR+ga8W4a5tlfGMXDBnl/K2bnFs2x11b9NkFLDJ7mdkih J4c/iOWT/mT5suLnnybyg6ZGaxGkAKou2AumiSmkazmq5hGG67hkpAOqFEfDK0J2 Au7/6VN6GZXgiwt8nYaAB/qR5NVcww4m/6GQ2looaWgRLT/wgC3W2ZKvw6zEdl2J OxOpwf2ujG/75zLQaxTeZ5rKnGtAXH4v0KhY9CWQacQPi4L2MVCrvUrDB4j0as4H Wmsu7g6fZA9Vlf1aW/mlDY1ftozfbDaKORoYVS+CsWhm1oiQI5t+sAWRTkbbS85t pobgKfFdvNsl9kS1zRdEddK2tyotwtXh2jz+P/s1l95hfqZ8IdVBJNMlcrHRINOI 2iQXFfGRhCCqMcfFiGXJ43tYja/aCsaIc4M5TrEma57czZT5jK8HSLh0ZUmFYDoe /TfUegVhFASmkNTk7dVZgZ2UoQVkv4lWs+xuf8YgX3UalWgl/YIRRFl4NnylGlEc jjrX3MjXATqXzLPEZaf8dRZHIpB6FYmZq1QqaoefcUQ46gBOueThElZP3sNWR8a2 MOtknauLfLwQbrcH5CmqKpIpXTB4LKgbf/omH2jQlxBhQ5t7PXHVD1NFsbZbwM8J RVCZb4PwqEwOt/wibTrk =BCp4 -----END PGP SIGNATURE----- Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc-specific updates from Olof Johansson: "Most notable here is probably the addition of basic support for the BCM2835, an SoC used in some of the Roku 2 players as well as the much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren. It's still early days on mainline support, with just the basics working. But it has to start somewhere! Beyond that there's some conversions of clock infrastructure on tegra to common clock, misc updates for several other platforms, and OMAP now has its own bus (under drivers/bus) to manage its devices through. This branch adds two new directories outside of arch/arm: drivers/irqchip for new irq controllers, and drivers/bus for the above OMAP bus. It's expected that some of the other platforms will migrate parts of their platforms to those directories over time as well." Fix up trivial conflicts with the clk infrastructure changes. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits) ARM: shmobile: add new __iomem annotation for new code ARM: LPC32xx: Support GPI 28 ARM: LPC32xx: Platform update for devicetree completion of spi-pl022 ARM: LPC32xx: Board cleanup irqchip: fill in empty Kconfig ARM: SAMSUNG: Add check for NULL in clock interface ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state ARM: EXYNOS: Add bus clock for FIMD ARM: SAMSUNG: Fix HDMI related warnings ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock ARM: EXYNOS: Fix incorrect help text ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture ARM: bcm2835: instantiate console UART ARM: bcm2835: add stub clock driver ARM: bcm2835: add system timer ARM: bcm2835: add interrupt controller driver ARM: add infra-structure for BCM2835 and Raspberry Pi ARM: tegra20: add CPU hotplug support ...
666 lines
17 KiB
C
666 lines
17 KiB
C
/*
|
|
* OMAP3/4 - specific DPLL control functions
|
|
*
|
|
* Copyright (C) 2009-2010 Texas Instruments, Inc.
|
|
* Copyright (C) 2009-2010 Nokia Corporation
|
|
*
|
|
* Written by Paul Walmsley
|
|
* Testing and integration fixes by Jouni Högander
|
|
*
|
|
* 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth
|
|
* Menon
|
|
*
|
|
* Parts of this code are based on code written by
|
|
* Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/device.h>
|
|
#include <linux/list.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/clkdev.h>
|
|
|
|
#include <plat/clock.h>
|
|
|
|
#include "soc.h"
|
|
#include "clock.h"
|
|
#include "cm2xxx_3xxx.h"
|
|
#include "cm-regbits-34xx.h"
|
|
|
|
/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
|
|
#define DPLL_AUTOIDLE_DISABLE 0x0
|
|
#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1
|
|
|
|
#define MAX_DPLL_WAIT_TRIES 1000000
|
|
|
|
/* Private functions */
|
|
|
|
/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
|
|
static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
|
|
{
|
|
const struct dpll_data *dd;
|
|
u32 v;
|
|
|
|
dd = clk->dpll_data;
|
|
|
|
v = __raw_readl(dd->control_reg);
|
|
v &= ~dd->enable_mask;
|
|
v |= clken_bits << __ffs(dd->enable_mask);
|
|
__raw_writel(v, dd->control_reg);
|
|
}
|
|
|
|
/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
|
|
static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
|
|
{
|
|
const struct dpll_data *dd;
|
|
int i = 0;
|
|
int ret = -EINVAL;
|
|
const char *clk_name;
|
|
|
|
dd = clk->dpll_data;
|
|
clk_name = __clk_get_name(clk);
|
|
|
|
state <<= __ffs(dd->idlest_mask);
|
|
|
|
while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) &&
|
|
i < MAX_DPLL_WAIT_TRIES) {
|
|
i++;
|
|
udelay(1);
|
|
}
|
|
|
|
if (i == MAX_DPLL_WAIT_TRIES) {
|
|
printk(KERN_ERR "clock: %s failed transition to '%s'\n",
|
|
clk_name, (state) ? "locked" : "bypassed");
|
|
} else {
|
|
pr_debug("clock: %s transition to '%s' in %d loops\n",
|
|
clk_name, (state) ? "locked" : "bypassed", i);
|
|
|
|
ret = 0;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* From 3430 TRM ES2 4.7.6.2 */
|
|
static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
|
|
{
|
|
unsigned long fint;
|
|
u16 f = 0;
|
|
|
|
fint = __clk_get_rate(clk->dpll_data->clk_ref) / n;
|
|
|
|
pr_debug("clock: fint is %lu\n", fint);
|
|
|
|
if (fint >= 750000 && fint <= 1000000)
|
|
f = 0x3;
|
|
else if (fint > 1000000 && fint <= 1250000)
|
|
f = 0x4;
|
|
else if (fint > 1250000 && fint <= 1500000)
|
|
f = 0x5;
|
|
else if (fint > 1500000 && fint <= 1750000)
|
|
f = 0x6;
|
|
else if (fint > 1750000 && fint <= 2100000)
|
|
f = 0x7;
|
|
else if (fint > 7500000 && fint <= 10000000)
|
|
f = 0xB;
|
|
else if (fint > 10000000 && fint <= 12500000)
|
|
f = 0xC;
|
|
else if (fint > 12500000 && fint <= 15000000)
|
|
f = 0xD;
|
|
else if (fint > 15000000 && fint <= 17500000)
|
|
f = 0xE;
|
|
else if (fint > 17500000 && fint <= 21000000)
|
|
f = 0xF;
|
|
else
|
|
pr_debug("clock: unknown freqsel setting for %d\n", n);
|
|
|
|
return f;
|
|
}
|
|
|
|
/*
|
|
* _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
|
|
* @clk: pointer to a DPLL struct clk
|
|
*
|
|
* Instructs a non-CORE DPLL to lock. Waits for the DPLL to report
|
|
* readiness before returning. Will save and restore the DPLL's
|
|
* autoidle state across the enable, per the CDP code. If the DPLL
|
|
* locked successfully, return 0; if the DPLL did not lock in the time
|
|
* allotted, or DPLL3 was passed in, return -EINVAL.
|
|
*/
|
|
static int _omap3_noncore_dpll_lock(struct clk *clk)
|
|
{
|
|
const struct dpll_data *dd;
|
|
u8 ai;
|
|
u8 state = 1;
|
|
int r = 0;
|
|
|
|
pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk));
|
|
|
|
dd = clk->dpll_data;
|
|
state <<= __ffs(dd->idlest_mask);
|
|
|
|
/* Check if already locked */
|
|
if ((__raw_readl(dd->idlest_reg) & dd->idlest_mask) == state)
|
|
goto done;
|
|
|
|
ai = omap3_dpll_autoidle_read(clk);
|
|
|
|
if (ai)
|
|
omap3_dpll_deny_idle(clk);
|
|
|
|
_omap3_dpll_write_clken(clk, DPLL_LOCKED);
|
|
|
|
r = _omap3_wait_dpll_status(clk, 1);
|
|
|
|
if (ai)
|
|
omap3_dpll_allow_idle(clk);
|
|
|
|
done:
|
|
return r;
|
|
}
|
|
|
|
/*
|
|
* _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
|
|
* @clk: pointer to a DPLL struct clk
|
|
*
|
|
* Instructs a non-CORE DPLL to enter low-power bypass mode. In
|
|
* bypass mode, the DPLL's rate is set equal to its parent clock's
|
|
* rate. Waits for the DPLL to report readiness before returning.
|
|
* Will save and restore the DPLL's autoidle state across the enable,
|
|
* per the CDP code. If the DPLL entered bypass mode successfully,
|
|
* return 0; if the DPLL did not enter bypass in the time allotted, or
|
|
* DPLL3 was passed in, or the DPLL does not support low-power bypass,
|
|
* return -EINVAL.
|
|
*/
|
|
static int _omap3_noncore_dpll_bypass(struct clk *clk)
|
|
{
|
|
int r;
|
|
u8 ai;
|
|
|
|
if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
|
|
return -EINVAL;
|
|
|
|
pr_debug("clock: configuring DPLL %s for low-power bypass\n",
|
|
__clk_get_name(clk));
|
|
|
|
ai = omap3_dpll_autoidle_read(clk);
|
|
|
|
_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
|
|
|
|
r = _omap3_wait_dpll_status(clk, 0);
|
|
|
|
if (ai)
|
|
omap3_dpll_allow_idle(clk);
|
|
|
|
return r;
|
|
}
|
|
|
|
/*
|
|
* _omap3_noncore_dpll_stop - instruct a DPLL to stop
|
|
* @clk: pointer to a DPLL struct clk
|
|
*
|
|
* Instructs a non-CORE DPLL to enter low-power stop. Will save and
|
|
* restore the DPLL's autoidle state across the stop, per the CDP
|
|
* code. If DPLL3 was passed in, or the DPLL does not support
|
|
* low-power stop, return -EINVAL; otherwise, return 0.
|
|
*/
|
|
static int _omap3_noncore_dpll_stop(struct clk *clk)
|
|
{
|
|
u8 ai;
|
|
|
|
if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
|
|
return -EINVAL;
|
|
|
|
pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk));
|
|
|
|
ai = omap3_dpll_autoidle_read(clk);
|
|
|
|
_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
|
|
|
|
if (ai)
|
|
omap3_dpll_allow_idle(clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _lookup_dco - Lookup DCO used by j-type DPLL
|
|
* @clk: pointer to a DPLL struct clk
|
|
* @dco: digital control oscillator selector
|
|
* @m: DPLL multiplier to set
|
|
* @n: DPLL divider to set
|
|
*
|
|
* See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
|
|
*
|
|
* XXX This code is not needed for 3430/AM35xx; can it be optimized
|
|
* out in non-multi-OMAP builds for those chips?
|
|
*/
|
|
static void _lookup_dco(struct clk *clk, u8 *dco, u16 m, u8 n)
|
|
{
|
|
unsigned long fint, clkinp; /* watch out for overflow */
|
|
|
|
clkinp = __clk_get_rate(__clk_get_parent(clk));
|
|
fint = (clkinp / n) * m;
|
|
|
|
if (fint < 1000000000)
|
|
*dco = 2;
|
|
else
|
|
*dco = 4;
|
|
}
|
|
|
|
/**
|
|
* _lookup_sddiv - Calculate sigma delta divider for j-type DPLL
|
|
* @clk: pointer to a DPLL struct clk
|
|
* @sd_div: target sigma-delta divider
|
|
* @m: DPLL multiplier to set
|
|
* @n: DPLL divider to set
|
|
*
|
|
* See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
|
|
*
|
|
* XXX This code is not needed for 3430/AM35xx; can it be optimized
|
|
* out in non-multi-OMAP builds for those chips?
|
|
*/
|
|
static void _lookup_sddiv(struct clk *clk, u8 *sd_div, u16 m, u8 n)
|
|
{
|
|
unsigned long clkinp, sd; /* watch out for overflow */
|
|
int mod1, mod2;
|
|
|
|
clkinp = __clk_get_rate(__clk_get_parent(clk));
|
|
|
|
/*
|
|
* target sigma-delta to near 250MHz
|
|
* sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
|
|
*/
|
|
clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */
|
|
mod1 = (clkinp * m) % (250 * n);
|
|
sd = (clkinp * m) / (250 * n);
|
|
mod2 = sd % 10;
|
|
sd /= 10;
|
|
|
|
if (mod1 || mod2)
|
|
sd++;
|
|
*sd_div = sd;
|
|
}
|
|
|
|
/*
|
|
* _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
|
|
* @clk: struct clk * of DPLL to set
|
|
* @m: DPLL multiplier to set
|
|
* @n: DPLL divider to set
|
|
* @freqsel: FREQSEL value to set
|
|
*
|
|
* Program the DPLL with the supplied M, N values, and wait for the DPLL to
|
|
* lock.. Returns -EINVAL upon error, or 0 upon success.
|
|
*/
|
|
static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
|
|
{
|
|
struct dpll_data *dd = clk->dpll_data;
|
|
u8 dco, sd_div;
|
|
u32 v;
|
|
|
|
/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
|
|
_omap3_noncore_dpll_bypass(clk);
|
|
|
|
/*
|
|
* Set jitter correction. No jitter correction for OMAP4 and 3630
|
|
* since freqsel field is no longer present
|
|
*/
|
|
if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) {
|
|
v = __raw_readl(dd->control_reg);
|
|
v &= ~dd->freqsel_mask;
|
|
v |= freqsel << __ffs(dd->freqsel_mask);
|
|
__raw_writel(v, dd->control_reg);
|
|
}
|
|
|
|
/* Set DPLL multiplier, divider */
|
|
v = __raw_readl(dd->mult_div1_reg);
|
|
v &= ~(dd->mult_mask | dd->div1_mask);
|
|
v |= m << __ffs(dd->mult_mask);
|
|
v |= (n - 1) << __ffs(dd->div1_mask);
|
|
|
|
/* Configure dco and sd_div for dplls that have these fields */
|
|
if (dd->dco_mask) {
|
|
_lookup_dco(clk, &dco, m, n);
|
|
v &= ~(dd->dco_mask);
|
|
v |= dco << __ffs(dd->dco_mask);
|
|
}
|
|
if (dd->sddiv_mask) {
|
|
_lookup_sddiv(clk, &sd_div, m, n);
|
|
v &= ~(dd->sddiv_mask);
|
|
v |= sd_div << __ffs(dd->sddiv_mask);
|
|
}
|
|
|
|
__raw_writel(v, dd->mult_div1_reg);
|
|
|
|
/* We let the clock framework set the other output dividers later */
|
|
|
|
/* REVISIT: Set ramp-up delay? */
|
|
|
|
_omap3_noncore_dpll_lock(clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Public functions */
|
|
|
|
/**
|
|
* omap3_dpll_recalc - recalculate DPLL rate
|
|
* @clk: DPLL struct clk
|
|
*
|
|
* Recalculate and propagate the DPLL rate.
|
|
*/
|
|
unsigned long omap3_dpll_recalc(struct clk *clk)
|
|
{
|
|
return omap2_get_dpll_rate(clk);
|
|
}
|
|
|
|
/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
|
|
|
|
/**
|
|
* omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
|
|
* @clk: pointer to a DPLL struct clk
|
|
*
|
|
* Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
|
|
* The choice of modes depends on the DPLL's programmed rate: if it is
|
|
* the same as the DPLL's parent clock, it will enter bypass;
|
|
* otherwise, it will enter lock. This code will wait for the DPLL to
|
|
* indicate readiness before returning, unless the DPLL takes too long
|
|
* to enter the target state. Intended to be used as the struct clk's
|
|
* enable function. If DPLL3 was passed in, or the DPLL does not
|
|
* support low-power stop, or if the DPLL took too long to enter
|
|
* bypass or lock, return -EINVAL; otherwise, return 0.
|
|
*/
|
|
int omap3_noncore_dpll_enable(struct clk *clk)
|
|
{
|
|
int r;
|
|
struct dpll_data *dd;
|
|
struct clk *parent;
|
|
|
|
dd = clk->dpll_data;
|
|
if (!dd)
|
|
return -EINVAL;
|
|
|
|
parent = __clk_get_parent(clk);
|
|
|
|
if (__clk_get_rate(clk) == __clk_get_rate(dd->clk_bypass)) {
|
|
WARN_ON(parent != dd->clk_bypass);
|
|
r = _omap3_noncore_dpll_bypass(clk);
|
|
} else {
|
|
WARN_ON(parent != dd->clk_ref);
|
|
r = _omap3_noncore_dpll_lock(clk);
|
|
}
|
|
/*
|
|
*FIXME: this is dubious - if clk->rate has changed, what about
|
|
* propagating?
|
|
*/
|
|
if (!r)
|
|
clk->rate = (clk->recalc) ? clk->recalc(clk) :
|
|
omap2_get_dpll_rate(clk);
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
|
|
* @clk: pointer to a DPLL struct clk
|
|
*
|
|
* Instructs a non-CORE DPLL to enter low-power stop. This function is
|
|
* intended for use in struct clkops. No return value.
|
|
*/
|
|
void omap3_noncore_dpll_disable(struct clk *clk)
|
|
{
|
|
_omap3_noncore_dpll_stop(clk);
|
|
}
|
|
|
|
|
|
/* Non-CORE DPLL rate set code */
|
|
|
|
/**
|
|
* omap3_noncore_dpll_set_rate - set non-core DPLL rate
|
|
* @clk: struct clk * of DPLL to set
|
|
* @rate: rounded target rate
|
|
*
|
|
* Set the DPLL CLKOUT to the target rate. If the DPLL can enter
|
|
* low-power bypass, and the target rate is the bypass source clock
|
|
* rate, then configure the DPLL for bypass. Otherwise, round the
|
|
* target rate if it hasn't been done already, then program and lock
|
|
* the DPLL. Returns -EINVAL upon error, or 0 upon success.
|
|
*/
|
|
int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
|
|
{
|
|
struct clk *new_parent = NULL;
|
|
unsigned long hw_rate, bypass_rate;
|
|
u16 freqsel = 0;
|
|
struct dpll_data *dd;
|
|
int ret;
|
|
|
|
if (!clk || !rate)
|
|
return -EINVAL;
|
|
|
|
dd = clk->dpll_data;
|
|
if (!dd)
|
|
return -EINVAL;
|
|
|
|
hw_rate = (clk->recalc) ? clk->recalc(clk) : omap2_get_dpll_rate(clk);
|
|
if (rate == hw_rate)
|
|
return 0;
|
|
|
|
/*
|
|
* Ensure both the bypass and ref clocks are enabled prior to
|
|
* doing anything; we need the bypass clock running to reprogram
|
|
* the DPLL.
|
|
*/
|
|
omap2_clk_enable(dd->clk_bypass);
|
|
omap2_clk_enable(dd->clk_ref);
|
|
|
|
bypass_rate = __clk_get_rate(dd->clk_bypass);
|
|
if (bypass_rate == rate &&
|
|
(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
|
|
pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
|
|
|
|
ret = _omap3_noncore_dpll_bypass(clk);
|
|
if (!ret)
|
|
new_parent = dd->clk_bypass;
|
|
} else {
|
|
if (dd->last_rounded_rate != rate)
|
|
rate = clk->round_rate(clk, rate);
|
|
|
|
if (dd->last_rounded_rate == 0)
|
|
return -EINVAL;
|
|
|
|
/* No freqsel on OMAP4 and OMAP3630 */
|
|
if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) {
|
|
freqsel = _omap3_dpll_compute_freqsel(clk,
|
|
dd->last_rounded_n);
|
|
if (!freqsel)
|
|
WARN_ON(1);
|
|
}
|
|
|
|
pr_debug("clock: %s: set rate: locking rate to %lu.\n",
|
|
__clk_get_name(clk), rate);
|
|
|
|
ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
|
|
dd->last_rounded_n, freqsel);
|
|
if (!ret)
|
|
new_parent = dd->clk_ref;
|
|
}
|
|
if (!ret) {
|
|
/*
|
|
* Switch the parent clock in the hierarchy, and make sure
|
|
* that the new parent's usecount is correct. Note: we
|
|
* enable the new parent before disabling the old to avoid
|
|
* any unnecessary hardware disable->enable transitions.
|
|
*/
|
|
if (clk->usecount) {
|
|
omap2_clk_enable(new_parent);
|
|
omap2_clk_disable(clk->parent);
|
|
}
|
|
clk_reparent(clk, new_parent);
|
|
clk->rate = rate;
|
|
}
|
|
omap2_clk_disable(dd->clk_ref);
|
|
omap2_clk_disable(dd->clk_bypass);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* DPLL autoidle read/set code */
|
|
|
|
/**
|
|
* omap3_dpll_autoidle_read - read a DPLL's autoidle bits
|
|
* @clk: struct clk * of the DPLL to read
|
|
*
|
|
* Return the DPLL's autoidle bits, shifted down to bit 0. Returns
|
|
* -EINVAL if passed a null pointer or if the struct clk does not
|
|
* appear to refer to a DPLL.
|
|
*/
|
|
u32 omap3_dpll_autoidle_read(struct clk *clk)
|
|
{
|
|
const struct dpll_data *dd;
|
|
u32 v;
|
|
|
|
if (!clk || !clk->dpll_data)
|
|
return -EINVAL;
|
|
|
|
dd = clk->dpll_data;
|
|
|
|
if (!dd->autoidle_reg)
|
|
return -EINVAL;
|
|
|
|
v = __raw_readl(dd->autoidle_reg);
|
|
v &= dd->autoidle_mask;
|
|
v >>= __ffs(dd->autoidle_mask);
|
|
|
|
return v;
|
|
}
|
|
|
|
/**
|
|
* omap3_dpll_allow_idle - enable DPLL autoidle bits
|
|
* @clk: struct clk * of the DPLL to operate on
|
|
*
|
|
* Enable DPLL automatic idle control. This automatic idle mode
|
|
* switching takes effect only when the DPLL is locked, at least on
|
|
* OMAP3430. The DPLL will enter low-power stop when its downstream
|
|
* clocks are gated. No return value.
|
|
*/
|
|
void omap3_dpll_allow_idle(struct clk *clk)
|
|
{
|
|
const struct dpll_data *dd;
|
|
u32 v;
|
|
|
|
if (!clk || !clk->dpll_data)
|
|
return;
|
|
|
|
dd = clk->dpll_data;
|
|
|
|
if (!dd->autoidle_reg) {
|
|
pr_debug("clock: DPLL %s: autoidle not supported\n",
|
|
__clk_get_name(clk));
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* REVISIT: CORE DPLL can optionally enter low-power bypass
|
|
* by writing 0x5 instead of 0x1. Add some mechanism to
|
|
* optionally enter this mode.
|
|
*/
|
|
v = __raw_readl(dd->autoidle_reg);
|
|
v &= ~dd->autoidle_mask;
|
|
v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
|
|
__raw_writel(v, dd->autoidle_reg);
|
|
|
|
}
|
|
|
|
/**
|
|
* omap3_dpll_deny_idle - prevent DPLL from automatically idling
|
|
* @clk: struct clk * of the DPLL to operate on
|
|
*
|
|
* Disable DPLL automatic idle control. No return value.
|
|
*/
|
|
void omap3_dpll_deny_idle(struct clk *clk)
|
|
{
|
|
const struct dpll_data *dd;
|
|
u32 v;
|
|
|
|
if (!clk || !clk->dpll_data)
|
|
return;
|
|
|
|
dd = clk->dpll_data;
|
|
|
|
if (!dd->autoidle_reg) {
|
|
pr_debug("clock: DPLL %s: autoidle not supported\n",
|
|
__clk_get_name(clk));
|
|
return;
|
|
}
|
|
|
|
v = __raw_readl(dd->autoidle_reg);
|
|
v &= ~dd->autoidle_mask;
|
|
v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
|
|
__raw_writel(v, dd->autoidle_reg);
|
|
|
|
}
|
|
|
|
/* Clock control for DPLL outputs */
|
|
|
|
/**
|
|
* omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
|
|
* @clk: DPLL output struct clk
|
|
*
|
|
* Using parent clock DPLL data, look up DPLL state. If locked, set our
|
|
* rate to the dpll_clk * 2; otherwise, just use dpll_clk.
|
|
*/
|
|
unsigned long omap3_clkoutx2_recalc(struct clk *clk)
|
|
{
|
|
const struct dpll_data *dd;
|
|
unsigned long rate;
|
|
u32 v;
|
|
struct clk *pclk;
|
|
unsigned long parent_rate;
|
|
|
|
/* Walk up the parents of clk, looking for a DPLL */
|
|
pclk = __clk_get_parent(clk);
|
|
while (pclk && !pclk->dpll_data)
|
|
pclk = __clk_get_parent(pclk);
|
|
|
|
/* clk does not have a DPLL as a parent? error in the clock data */
|
|
if (!pclk) {
|
|
WARN_ON(1);
|
|
return 0;
|
|
}
|
|
|
|
dd = pclk->dpll_data;
|
|
|
|
WARN_ON(!dd->enable_mask);
|
|
|
|
parent_rate = __clk_get_rate(__clk_get_parent(clk));
|
|
v = __raw_readl(dd->control_reg) & dd->enable_mask;
|
|
v >>= __ffs(dd->enable_mask);
|
|
if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
|
|
rate = parent_rate;
|
|
else
|
|
rate = parent_rate * 2;
|
|
return rate;
|
|
}
|
|
|
|
/* OMAP3/4 non-CORE DPLL clkops */
|
|
|
|
const struct clkops clkops_omap3_noncore_dpll_ops = {
|
|
.enable = omap3_noncore_dpll_enable,
|
|
.disable = omap3_noncore_dpll_disable,
|
|
.allow_idle = omap3_dpll_allow_idle,
|
|
.deny_idle = omap3_dpll_deny_idle,
|
|
};
|
|
|
|
const struct clkops clkops_omap3_core_dpll_ops = {
|
|
.allow_idle = omap3_dpll_allow_idle,
|
|
.deny_idle = omap3_dpll_deny_idle,
|
|
};
|