mirror of
https://github.com/torvalds/linux.git
synced 2024-12-25 12:21:37 +00:00
0fb300fa9d
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
404 lines
8.0 KiB
C
404 lines
8.0 KiB
C
/*
|
|
* Combined Ethernet driver for Motorola MPC8xx and MPC82xx.
|
|
*
|
|
* Copyright (c) 2003 Intracom S.A.
|
|
* by Pantelis Antoniou <panto@intracom.gr>
|
|
*
|
|
* 2005 (c) MontaVista Software, Inc.
|
|
* Vitaly Bordug <vbordug@ru.mvista.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/pgtable.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
#include "fs_enet.h"
|
|
|
|
static int bitbang_prep_bit(u8 **datp, u8 *mskp,
|
|
struct fs_mii_bit *mii_bit)
|
|
{
|
|
void *dat;
|
|
int adv;
|
|
u8 msk;
|
|
|
|
dat = (void*) mii_bit->offset;
|
|
|
|
adv = mii_bit->bit >> 3;
|
|
dat = (char *)dat + adv;
|
|
|
|
msk = 1 << (7 - (mii_bit->bit & 7));
|
|
|
|
*datp = dat;
|
|
*mskp = msk;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void bb_set(u8 *p, u8 m)
|
|
{
|
|
out_8(p, in_8(p) | m);
|
|
}
|
|
|
|
static inline void bb_clr(u8 *p, u8 m)
|
|
{
|
|
out_8(p, in_8(p) & ~m);
|
|
}
|
|
|
|
static inline int bb_read(u8 *p, u8 m)
|
|
{
|
|
return (in_8(p) & m) != 0;
|
|
}
|
|
|
|
static inline void mdio_active(struct bb_info *bitbang)
|
|
{
|
|
bb_set(bitbang->mdio_dir, bitbang->mdio_dir_msk);
|
|
}
|
|
|
|
static inline void mdio_tristate(struct bb_info *bitbang )
|
|
{
|
|
bb_clr(bitbang->mdio_dir, bitbang->mdio_dir_msk);
|
|
}
|
|
|
|
static inline int mdio_read(struct bb_info *bitbang )
|
|
{
|
|
return bb_read(bitbang->mdio_dat, bitbang->mdio_dat_msk);
|
|
}
|
|
|
|
static inline void mdio(struct bb_info *bitbang , int what)
|
|
{
|
|
if (what)
|
|
bb_set(bitbang->mdio_dat, bitbang->mdio_dat_msk);
|
|
else
|
|
bb_clr(bitbang->mdio_dat, bitbang->mdio_dat_msk);
|
|
}
|
|
|
|
static inline void mdc(struct bb_info *bitbang , int what)
|
|
{
|
|
if (what)
|
|
bb_set(bitbang->mdc_dat, bitbang->mdc_msk);
|
|
else
|
|
bb_clr(bitbang->mdc_dat, bitbang->mdc_msk);
|
|
}
|
|
|
|
static inline void mii_delay(struct bb_info *bitbang )
|
|
{
|
|
udelay(bitbang->delay);
|
|
}
|
|
|
|
/* Utility to send the preamble, address, and register (common to read and write). */
|
|
static void bitbang_pre(struct bb_info *bitbang , int read, u8 addr, u8 reg)
|
|
{
|
|
int j;
|
|
|
|
/*
|
|
* Send a 32 bit preamble ('1's) with an extra '1' bit for good measure.
|
|
* The IEEE spec says this is a PHY optional requirement. The AMD
|
|
* 79C874 requires one after power up and one after a MII communications
|
|
* error. This means that we are doing more preambles than we need,
|
|
* but it is safer and will be much more robust.
|
|
*/
|
|
|
|
mdio_active(bitbang);
|
|
mdio(bitbang, 1);
|
|
for (j = 0; j < 32; j++) {
|
|
mdc(bitbang, 0);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
}
|
|
|
|
/* send the start bit (01) and the read opcode (10) or write (10) */
|
|
mdc(bitbang, 0);
|
|
mdio(bitbang, 0);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 0);
|
|
mdio(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 0);
|
|
mdio(bitbang, read);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 0);
|
|
mdio(bitbang, !read);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
|
|
/* send the PHY address */
|
|
for (j = 0; j < 5; j++) {
|
|
mdc(bitbang, 0);
|
|
mdio(bitbang, (addr & 0x10) != 0);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
addr <<= 1;
|
|
}
|
|
|
|
/* send the register address */
|
|
for (j = 0; j < 5; j++) {
|
|
mdc(bitbang, 0);
|
|
mdio(bitbang, (reg & 0x10) != 0);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
reg <<= 1;
|
|
}
|
|
}
|
|
|
|
static int fs_enet_mii_bb_read(struct mii_bus *bus , int phy_id, int location)
|
|
{
|
|
u16 rdreg;
|
|
int ret, j;
|
|
u8 addr = phy_id & 0xff;
|
|
u8 reg = location & 0xff;
|
|
struct bb_info* bitbang = bus->priv;
|
|
|
|
bitbang_pre(bitbang, 1, addr, reg);
|
|
|
|
/* tri-state our MDIO I/O pin so we can read */
|
|
mdc(bitbang, 0);
|
|
mdio_tristate(bitbang);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
|
|
/* check the turnaround bit: the PHY should be driving it to zero */
|
|
if (mdio_read(bitbang) != 0) {
|
|
/* PHY didn't drive TA low */
|
|
for (j = 0; j < 32; j++) {
|
|
mdc(bitbang, 0);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
}
|
|
ret = -1;
|
|
goto out;
|
|
}
|
|
|
|
mdc(bitbang, 0);
|
|
mii_delay(bitbang);
|
|
|
|
/* read 16 bits of register data, MSB first */
|
|
rdreg = 0;
|
|
for (j = 0; j < 16; j++) {
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
rdreg <<= 1;
|
|
rdreg |= mdio_read(bitbang);
|
|
mdc(bitbang, 0);
|
|
mii_delay(bitbang);
|
|
}
|
|
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 0);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
|
|
ret = rdreg;
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int fs_enet_mii_bb_write(struct mii_bus *bus, int phy_id, int location, u16 val)
|
|
{
|
|
int j;
|
|
struct bb_info* bitbang = bus->priv;
|
|
|
|
u8 addr = phy_id & 0xff;
|
|
u8 reg = location & 0xff;
|
|
u16 value = val & 0xffff;
|
|
|
|
bitbang_pre(bitbang, 0, addr, reg);
|
|
|
|
/* send the turnaround (10) */
|
|
mdc(bitbang, 0);
|
|
mdio(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 0);
|
|
mdio(bitbang, 0);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
|
|
/* write 16 bits of register data, MSB first */
|
|
for (j = 0; j < 16; j++) {
|
|
mdc(bitbang, 0);
|
|
mdio(bitbang, (value & 0x8000) != 0);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
value <<= 1;
|
|
}
|
|
|
|
/*
|
|
* Tri-state the MDIO line.
|
|
*/
|
|
mdio_tristate(bitbang);
|
|
mdc(bitbang, 0);
|
|
mii_delay(bitbang);
|
|
mdc(bitbang, 1);
|
|
mii_delay(bitbang);
|
|
return 0;
|
|
}
|
|
|
|
static int fs_enet_mii_bb_reset(struct mii_bus *bus)
|
|
{
|
|
/*nothing here - dunno how to reset it*/
|
|
return 0;
|
|
}
|
|
|
|
static int fs_mii_bitbang_init(struct bb_info *bitbang, struct fs_mii_bb_platform_info* fmpi)
|
|
{
|
|
int r;
|
|
|
|
bitbang->delay = fmpi->delay;
|
|
|
|
r = bitbang_prep_bit(&bitbang->mdio_dir,
|
|
&bitbang->mdio_dir_msk,
|
|
&fmpi->mdio_dir);
|
|
if (r != 0)
|
|
return r;
|
|
|
|
r = bitbang_prep_bit(&bitbang->mdio_dat,
|
|
&bitbang->mdio_dat_msk,
|
|
&fmpi->mdio_dat);
|
|
if (r != 0)
|
|
return r;
|
|
|
|
r = bitbang_prep_bit(&bitbang->mdc_dat,
|
|
&bitbang->mdc_msk,
|
|
&fmpi->mdc_dat);
|
|
if (r != 0)
|
|
return r;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __devinit fs_enet_mdio_probe(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct fs_mii_bb_platform_info *pdata;
|
|
struct mii_bus *new_bus;
|
|
struct bb_info *bitbang;
|
|
int err = 0;
|
|
|
|
if (NULL == dev)
|
|
return -EINVAL;
|
|
|
|
new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
|
|
|
|
if (NULL == new_bus)
|
|
return -ENOMEM;
|
|
|
|
bitbang = kzalloc(sizeof(struct bb_info), GFP_KERNEL);
|
|
|
|
if (NULL == bitbang)
|
|
return -ENOMEM;
|
|
|
|
new_bus->name = "BB MII Bus",
|
|
new_bus->read = &fs_enet_mii_bb_read,
|
|
new_bus->write = &fs_enet_mii_bb_write,
|
|
new_bus->reset = &fs_enet_mii_bb_reset,
|
|
new_bus->id = pdev->id;
|
|
|
|
new_bus->phy_mask = ~0x9;
|
|
pdata = (struct fs_mii_bb_platform_info *)pdev->dev.platform_data;
|
|
|
|
if (NULL == pdata) {
|
|
printk(KERN_ERR "gfar mdio %d: Missing platform data!\n", pdev->id);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*set up workspace*/
|
|
fs_mii_bitbang_init(bitbang, pdata);
|
|
|
|
new_bus->priv = bitbang;
|
|
|
|
new_bus->irq = pdata->irq;
|
|
|
|
new_bus->dev = dev;
|
|
dev_set_drvdata(dev, new_bus);
|
|
|
|
err = mdiobus_register(new_bus);
|
|
|
|
if (0 != err) {
|
|
printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
|
|
new_bus->name);
|
|
goto bus_register_fail;
|
|
}
|
|
|
|
return 0;
|
|
|
|
bus_register_fail:
|
|
kfree(bitbang);
|
|
kfree(new_bus);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int fs_enet_mdio_remove(struct device *dev)
|
|
{
|
|
struct mii_bus *bus = dev_get_drvdata(dev);
|
|
|
|
mdiobus_unregister(bus);
|
|
|
|
dev_set_drvdata(dev, NULL);
|
|
|
|
iounmap((void *) (&bus->priv));
|
|
bus->priv = NULL;
|
|
kfree(bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct device_driver fs_enet_bb_mdio_driver = {
|
|
.name = "fsl-bb-mdio",
|
|
.bus = &platform_bus_type,
|
|
.probe = fs_enet_mdio_probe,
|
|
.remove = fs_enet_mdio_remove,
|
|
};
|
|
|
|
int fs_enet_mdio_bb_init(void)
|
|
{
|
|
return driver_register(&fs_enet_bb_mdio_driver);
|
|
}
|
|
|
|
void fs_enet_mdio_bb_exit(void)
|
|
{
|
|
driver_unregister(&fs_enet_bb_mdio_driver);
|
|
}
|
|
|