mirror of
https://github.com/torvalds/linux.git
synced 2024-12-01 08:31:37 +00:00
81c0fc51b7
This change adds support for Qualcomm Technologies Inc platforms that use UFS driver. for example, it adds : - PM specific operations during hibern8, suspend, resume, clock setup - qcom-ufs generic phy driver initialization, calibration, power-on/off sequence, etc. - UFS Controller specific configuration - Rate, Gear, Mode negotiation between device and controller Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by: Dov Levenglick <dovl@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
171 lines
4.9 KiB
C
171 lines
4.9 KiB
C
/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#ifndef UFS_QCOM_H_
|
|
#define UFS_QCOM_H_
|
|
|
|
#define MAX_UFS_QCOM_HOSTS 1
|
|
#define MAX_U32 (~(u32)0)
|
|
#define MPHY_TX_FSM_STATE 0x41
|
|
#define TX_FSM_HIBERN8 0x1
|
|
#define HBRN8_POLL_TOUT_MS 100
|
|
#define DEFAULT_CLK_RATE_HZ 1000000
|
|
#define BUS_VECTOR_NAME_LEN 32
|
|
|
|
#define UFS_HW_VER_MAJOR_SHFT (28)
|
|
#define UFS_HW_VER_MAJOR_MASK (0x000F << UFS_HW_VER_MAJOR_SHFT)
|
|
#define UFS_HW_VER_MINOR_SHFT (16)
|
|
#define UFS_HW_VER_MINOR_MASK (0x0FFF << UFS_HW_VER_MINOR_SHFT)
|
|
#define UFS_HW_VER_STEP_SHFT (0)
|
|
#define UFS_HW_VER_STEP_MASK (0xFFFF << UFS_HW_VER_STEP_SHFT)
|
|
|
|
/* vendor specific pre-defined parameters */
|
|
#define SLOW 1
|
|
#define FAST 2
|
|
|
|
#define UFS_QCOM_LIMIT_NUM_LANES_RX 2
|
|
#define UFS_QCOM_LIMIT_NUM_LANES_TX 2
|
|
#define UFS_QCOM_LIMIT_HSGEAR_RX UFS_HS_G2
|
|
#define UFS_QCOM_LIMIT_HSGEAR_TX UFS_HS_G2
|
|
#define UFS_QCOM_LIMIT_PWMGEAR_RX UFS_PWM_G4
|
|
#define UFS_QCOM_LIMIT_PWMGEAR_TX UFS_PWM_G4
|
|
#define UFS_QCOM_LIMIT_RX_PWR_PWM SLOW_MODE
|
|
#define UFS_QCOM_LIMIT_TX_PWR_PWM SLOW_MODE
|
|
#define UFS_QCOM_LIMIT_RX_PWR_HS FAST_MODE
|
|
#define UFS_QCOM_LIMIT_TX_PWR_HS FAST_MODE
|
|
#define UFS_QCOM_LIMIT_HS_RATE PA_HS_MODE_B
|
|
#define UFS_QCOM_LIMIT_DESIRED_MODE FAST
|
|
|
|
/* QCOM UFS host controller vendor specific registers */
|
|
enum {
|
|
REG_UFS_SYS1CLK_1US = 0xC0,
|
|
REG_UFS_TX_SYMBOL_CLK_NS_US = 0xC4,
|
|
REG_UFS_LOCAL_PORT_ID_REG = 0xC8,
|
|
REG_UFS_PA_ERR_CODE = 0xCC,
|
|
REG_UFS_RETRY_TIMER_REG = 0xD0,
|
|
REG_UFS_PA_LINK_STARTUP_TIMER = 0xD8,
|
|
REG_UFS_CFG1 = 0xDC,
|
|
REG_UFS_CFG2 = 0xE0,
|
|
REG_UFS_HW_VERSION = 0xE4,
|
|
|
|
UFS_DBG_RD_REG_UAWM = 0x100,
|
|
UFS_DBG_RD_REG_UARM = 0x200,
|
|
UFS_DBG_RD_REG_TXUC = 0x300,
|
|
UFS_DBG_RD_REG_RXUC = 0x400,
|
|
UFS_DBG_RD_REG_DFC = 0x500,
|
|
UFS_DBG_RD_REG_TRLUT = 0x600,
|
|
UFS_DBG_RD_REG_TMRLUT = 0x700,
|
|
UFS_UFS_DBG_RD_REG_OCSC = 0x800,
|
|
|
|
UFS_UFS_DBG_RD_DESC_RAM = 0x1500,
|
|
UFS_UFS_DBG_RD_PRDT_RAM = 0x1700,
|
|
UFS_UFS_DBG_RD_RESP_RAM = 0x1800,
|
|
UFS_UFS_DBG_RD_EDTL_RAM = 0x1900,
|
|
};
|
|
|
|
/* bit definitions for REG_UFS_CFG2 register */
|
|
#define UAWM_HW_CGC_EN (1 << 0)
|
|
#define UARM_HW_CGC_EN (1 << 1)
|
|
#define TXUC_HW_CGC_EN (1 << 2)
|
|
#define RXUC_HW_CGC_EN (1 << 3)
|
|
#define DFC_HW_CGC_EN (1 << 4)
|
|
#define TRLUT_HW_CGC_EN (1 << 5)
|
|
#define TMRLUT_HW_CGC_EN (1 << 6)
|
|
#define OCSC_HW_CGC_EN (1 << 7)
|
|
|
|
#define REG_UFS_CFG2_CGC_EN_ALL (UAWM_HW_CGC_EN | UARM_HW_CGC_EN |\
|
|
TXUC_HW_CGC_EN | RXUC_HW_CGC_EN |\
|
|
DFC_HW_CGC_EN | TRLUT_HW_CGC_EN |\
|
|
TMRLUT_HW_CGC_EN | OCSC_HW_CGC_EN)
|
|
|
|
/* bit offset */
|
|
enum {
|
|
OFFSET_UFS_PHY_SOFT_RESET = 1,
|
|
OFFSET_CLK_NS_REG = 10,
|
|
};
|
|
|
|
/* bit masks */
|
|
enum {
|
|
MASK_UFS_PHY_SOFT_RESET = 0x2,
|
|
MASK_TX_SYMBOL_CLK_1US_REG = 0x3FF,
|
|
MASK_CLK_NS_REG = 0xFFFC00,
|
|
};
|
|
|
|
enum ufs_qcom_phy_init_type {
|
|
UFS_PHY_INIT_FULL,
|
|
UFS_PHY_INIT_CFG_RESTORE,
|
|
};
|
|
|
|
static inline void
|
|
ufs_qcom_get_controller_revision(struct ufs_hba *hba,
|
|
u8 *major, u16 *minor, u16 *step)
|
|
{
|
|
u32 ver = ufshcd_readl(hba, REG_UFS_HW_VERSION);
|
|
|
|
*major = (ver & UFS_HW_VER_MAJOR_MASK) >> UFS_HW_VER_MAJOR_SHFT;
|
|
*minor = (ver & UFS_HW_VER_MINOR_MASK) >> UFS_HW_VER_MINOR_SHFT;
|
|
*step = (ver & UFS_HW_VER_STEP_MASK) >> UFS_HW_VER_STEP_SHFT;
|
|
};
|
|
|
|
static inline void ufs_qcom_assert_reset(struct ufs_hba *hba)
|
|
{
|
|
ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET,
|
|
1 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1);
|
|
|
|
/*
|
|
* Make sure assertion of ufs phy reset is written to
|
|
* register before returning
|
|
*/
|
|
mb();
|
|
}
|
|
|
|
static inline void ufs_qcom_deassert_reset(struct ufs_hba *hba)
|
|
{
|
|
ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET,
|
|
0 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1);
|
|
|
|
/*
|
|
* Make sure de-assertion of ufs phy reset is written to
|
|
* register before returning
|
|
*/
|
|
mb();
|
|
}
|
|
|
|
struct ufs_qcom_bus_vote {
|
|
uint32_t client_handle;
|
|
uint32_t curr_vote;
|
|
int min_bw_vote;
|
|
int max_bw_vote;
|
|
int saved_vote;
|
|
bool is_max_bw_needed;
|
|
struct device_attribute max_bus_bw;
|
|
};
|
|
|
|
struct ufs_qcom_host {
|
|
struct phy *generic_phy;
|
|
struct ufs_hba *hba;
|
|
struct ufs_qcom_bus_vote bus_vote;
|
|
struct ufs_pa_layer_attr dev_req_params;
|
|
struct clk *rx_l0_sync_clk;
|
|
struct clk *tx_l0_sync_clk;
|
|
struct clk *rx_l1_sync_clk;
|
|
struct clk *tx_l1_sync_clk;
|
|
bool is_lane_clks_enabled;
|
|
};
|
|
|
|
#define ufs_qcom_is_link_off(hba) ufshcd_is_link_off(hba)
|
|
#define ufs_qcom_is_link_active(hba) ufshcd_is_link_active(hba)
|
|
#define ufs_qcom_is_link_hibern8(hba) ufshcd_is_link_hibern8(hba)
|
|
|
|
#endif /* UFS_QCOM_H_ */
|