mirror of
https://github.com/torvalds/linux.git
synced 2024-12-29 14:21:47 +00:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
840 lines
25 KiB
C
840 lines
25 KiB
C
/*
|
||
* sbpcd.h Specify interface address and interface type here.
|
||
*/
|
||
|
||
/*
|
||
* Attention! This file contains user-serviceable parts!
|
||
* I recommend to make use of it...
|
||
* If you feel helpless, look into Documentation/cdrom/sbpcd
|
||
* (good idea anyway, at least before mailing me).
|
||
*
|
||
* The definitions for the first controller can get overridden by
|
||
* the kernel command line ("lilo boot option").
|
||
* Examples:
|
||
* sbpcd=0x300,LaserMate
|
||
* or
|
||
* sbpcd=0x230,SoundBlaster
|
||
* or
|
||
* sbpcd=0x338,SoundScape
|
||
* or
|
||
* sbpcd=0x2C0,Teac16bit
|
||
*
|
||
* If sbpcd gets used as a module, you can load it with
|
||
* insmod sbpcd.o sbpcd=0x300,0
|
||
* or
|
||
* insmod sbpcd.o sbpcd=0x230,1
|
||
* or
|
||
* insmod sbpcd.o sbpcd=0x338,2
|
||
* or
|
||
* insmod sbpcd.o sbpcd=0x2C0,3
|
||
* respective to override the configured address and type.
|
||
*/
|
||
|
||
/*
|
||
* define your CDROM port base address as CDROM_PORT
|
||
* and specify the type of your interface card as SBPRO.
|
||
*
|
||
* address:
|
||
* ========
|
||
* SBPRO type addresses typically are 0x0230 (=0x220+0x10), 0x0250, ...
|
||
* LASERMATE type (CI-101P, WDH-7001C) addresses typically are 0x0300, ...
|
||
* SOUNDSCAPE addresses are from the LASERMATE type and range. You have to
|
||
* specify the REAL address here, not the configuration port address. Look
|
||
* at the CDROM driver's invoking line within your DOS CONFIG.SYS, or let
|
||
* sbpcd auto-probe, if you are not firm with the address.
|
||
* There are some soundcards on the market with 0x0630, 0x0650, ...; their
|
||
* type is not obvious (both types are possible).
|
||
*
|
||
* example: if your SBPRO audio address is 0x220, specify 0x230 and SBPRO 1.
|
||
* if your soundcard has its CDROM port above 0x300, specify
|
||
* that address and try SBPRO 0 first.
|
||
* if your SoundScape configuration port is at 0x330, specify
|
||
* 0x338 and SBPRO 2.
|
||
*
|
||
* interface type:
|
||
* ===============
|
||
* set SBPRO to 1 for "true" SoundBlaster card
|
||
* set SBPRO to 0 for "compatible" soundcards and
|
||
* for "poor" (no sound) interface cards.
|
||
* set SBPRO to 2 for Ensonic SoundScape or SPEA Media FX cards
|
||
* set SBPRO to 3 for Teac 16bit interface cards
|
||
*
|
||
* Almost all "compatible" sound boards need to set SBPRO to 0.
|
||
* If SBPRO is set wrong, the drives will get found - but any
|
||
* data access will give errors (audio access will work).
|
||
* The "OmniCD" no-sound interface card from CreativeLabs and most Teac
|
||
* interface cards need SBPRO 1.
|
||
*
|
||
* sound base:
|
||
* ===========
|
||
* The SOUND_BASE definition tells if we should try to turn the CD sound
|
||
* channels on. It will only be of use regarding soundcards with a SbPro
|
||
* compatible mixer.
|
||
*
|
||
* Example: #define SOUND_BASE 0x220 enables the sound card's CD channels
|
||
* #define SOUND_BASE 0 leaves the soundcard untouched
|
||
*/
|
||
#define CDROM_PORT 0x340 /* <-----------<< port address */
|
||
#define SBPRO 0 /* <-----------<< interface type */
|
||
#define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */
|
||
#define SOUND_BASE 0x220 /* <-----------<< sound address of this card or 0 */
|
||
|
||
/*
|
||
* some more or less user dependent definitions - service them!
|
||
*/
|
||
|
||
/* Set this to 0 once you have configured your interface definitions right. */
|
||
#define DISTRIBUTION 1
|
||
|
||
/*
|
||
* Time to wait after giving a message.
|
||
* This gets important if you enable non-standard DBG_xxx flags.
|
||
* You will see what happens if you omit the pause or make it
|
||
* too short. Be warned!
|
||
*/
|
||
#define KLOGD_PAUSE 1
|
||
|
||
/* tray control: eject tray if no disk is in */
|
||
#if DISTRIBUTION
|
||
#define JUKEBOX 0
|
||
#else
|
||
#define JUKEBOX 1
|
||
#endif /* DISTRIBUTION */
|
||
|
||
/* tray control: eject tray after last use */
|
||
#if DISTRIBUTION
|
||
#define EJECT 0
|
||
#else
|
||
#define EJECT 1
|
||
#endif /* DISTRIBUTION */
|
||
|
||
/* max. number of audio frames to read with one */
|
||
/* request (allocates n* 2352 bytes kernel memory!) */
|
||
/* may be freely adjusted, f.e. 75 (= 1 sec.), at */
|
||
/* runtime by use of the CDROMAUDIOBUFSIZ ioctl. */
|
||
#define READ_AUDIO 0
|
||
|
||
/* Optimizations for the Teac CD-55A drive read performance.
|
||
* SBP_TEAC_SPEED can be changed here, or one can set the
|
||
* variable "teac" when loading as a module.
|
||
* Valid settings are:
|
||
* 0 - very slow - the recommended "DISTRIBUTION 1" setup.
|
||
* 1 - 2x performance with little overhead. No busy waiting.
|
||
* 2 - 4x performance with 5ms overhead per read. Busy wait.
|
||
*
|
||
* Setting SBP_TEAC_SPEED or the variable 'teac' to anything
|
||
* other than 0 may cause problems. If you run into them, first
|
||
* change SBP_TEAC_SPEED back to 0 and see if your drive responds
|
||
* normally. If yes, you are "allowed" to report your case - to help
|
||
* me with the driver, not to solve your hassle. Don<6F>t mail if you
|
||
* simply are stuck into your own "tuning" experiments, you know?
|
||
*/
|
||
#define SBP_TEAC_SPEED 1
|
||
|
||
/*==========================================================================*/
|
||
/*==========================================================================*/
|
||
/*
|
||
* nothing to change below here if you are not fully aware what you're doing
|
||
*/
|
||
#ifndef _LINUX_SBPCD_H
|
||
|
||
#define _LINUX_SBPCD_H
|
||
/*==========================================================================*/
|
||
/*==========================================================================*/
|
||
/*
|
||
* driver's own read_ahead, data mode
|
||
*/
|
||
#define SBP_BUFFER_FRAMES 8
|
||
|
||
#define LONG_TIMING 0 /* test against timeouts with "gold" CDs on CR-521 */
|
||
#undef FUTURE
|
||
#undef SAFE_MIXED
|
||
|
||
#define TEST_UPC 0
|
||
#define SPEA_TEST 0
|
||
#define TEST_STI 0
|
||
#define OLD_BUSY 0
|
||
#undef PATH_CHECK
|
||
#ifndef SOUND_BASE
|
||
#define SOUND_BASE 0
|
||
#endif
|
||
#if DISTRIBUTION
|
||
#undef SBP_TEAC_SPEED
|
||
#define SBP_TEAC_SPEED 0
|
||
#endif
|
||
/*==========================================================================*/
|
||
/*
|
||
* DDI interface definitions
|
||
* "invented" by Fred N. van Kempen..
|
||
*/
|
||
#define DDIOCSDBG 0x9000
|
||
|
||
/*==========================================================================*/
|
||
/*
|
||
* "private" IOCTL functions
|
||
*/
|
||
#define CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */
|
||
|
||
/*==========================================================================*/
|
||
/*
|
||
* Debug output levels
|
||
*/
|
||
#define DBG_INF 1 /* necessary information */
|
||
#define DBG_BSZ 2 /* BLOCK_SIZE trace */
|
||
#define DBG_REA 3 /* READ status trace */
|
||
#define DBG_CHK 4 /* MEDIA CHECK trace */
|
||
#define DBG_TIM 5 /* datarate timer test */
|
||
#define DBG_INI 6 /* initialization trace */
|
||
#define DBG_TOC 7 /* tell TocEntry values */
|
||
#define DBG_IOC 8 /* ioctl trace */
|
||
#define DBG_STA 9 /* ResponseStatus() trace */
|
||
#define DBG_ERR 10 /* cc_ReadError() trace */
|
||
#define DBG_CMD 11 /* cmd_out() trace */
|
||
#define DBG_WRN 12 /* give explanation before auto-probing */
|
||
#define DBG_MUL 13 /* multi session code test */
|
||
#define DBG_IDX 14 /* test code for drive_id !=0 */
|
||
#define DBG_IOX 15 /* some special information */
|
||
#define DBG_DID 16 /* drive ID test */
|
||
#define DBG_RES 17 /* drive reset info */
|
||
#define DBG_SPI 18 /* SpinUp test */
|
||
#define DBG_IOS 19 /* ioctl trace: subchannel functions */
|
||
#define DBG_IO2 20 /* ioctl trace: general */
|
||
#define DBG_UPC 21 /* show UPC information */
|
||
#define DBG_XA1 22 /* XA mode debugging */
|
||
#define DBG_LCK 23 /* door (un)lock info */
|
||
#define DBG_SQ1 24 /* dump SubQ frame */
|
||
#define DBG_AUD 25 /* READ AUDIO debugging */
|
||
#define DBG_SEQ 26 /* Sequoia interface configuration trace */
|
||
#define DBG_LCS 27 /* Longshine LCS-7260 debugging trace */
|
||
#define DBG_CD2 28 /* MKE/Funai CD200 debugging trace */
|
||
#define DBG_TEA 29 /* TEAC CD-55A debugging trace */
|
||
#define DBG_ECS 30 /* ECS-AT (Vertos 100) debugging trace */
|
||
#define DBG_000 31 /* unnecessary information */
|
||
|
||
/*==========================================================================*/
|
||
/*==========================================================================*/
|
||
|
||
/*
|
||
* bits of flags_cmd_out:
|
||
*/
|
||
#define f_respo3 0x100
|
||
#define f_putcmd 0x80
|
||
#define f_respo2 0x40
|
||
#define f_lopsta 0x20
|
||
#define f_getsta 0x10
|
||
#define f_ResponseStatus 0x08
|
||
#define f_obey_p_check 0x04
|
||
#define f_bit1 0x02
|
||
#define f_wait_if_busy 0x01
|
||
|
||
/*
|
||
* diskstate_flags:
|
||
*/
|
||
#define x80_bit 0x80
|
||
#define upc_bit 0x40
|
||
#define volume_bit 0x20
|
||
#define toc_bit 0x10
|
||
#define multisession_bit 0x08
|
||
#define cd_size_bit 0x04
|
||
#define subq_bit 0x02
|
||
#define frame_size_bit 0x01
|
||
|
||
/*
|
||
* disk states (bits of diskstate_flags):
|
||
*/
|
||
#define upc_valid (current_drive->diskstate_flags&upc_bit)
|
||
#define volume_valid (current_drive->diskstate_flags&volume_bit)
|
||
#define toc_valid (current_drive->diskstate_flags&toc_bit)
|
||
#define cd_size_valid (current_drive->diskstate_flags&cd_size_bit)
|
||
#define subq_valid (current_drive->diskstate_flags&subq_bit)
|
||
#define frame_size_valid (current_drive->diskstate_flags&frame_size_bit)
|
||
|
||
/*
|
||
* the status_bits variable
|
||
*/
|
||
#define p_success 0x100
|
||
#define p_door_closed 0x80
|
||
#define p_caddy_in 0x40
|
||
#define p_spinning 0x20
|
||
#define p_check 0x10
|
||
#define p_busy_new 0x08
|
||
#define p_door_locked 0x04
|
||
#define p_disk_ok 0x01
|
||
|
||
/*
|
||
* LCS-7260 special status result bits:
|
||
*/
|
||
#define p_lcs_door_locked 0x02
|
||
#define p_lcs_door_closed 0x01 /* probably disk_in */
|
||
|
||
/*
|
||
* CR-52x special status result bits:
|
||
*/
|
||
#define p_caddin_old 0x40
|
||
#define p_success_old 0x08
|
||
#define p_busy_old 0x04
|
||
#define p_bit_1 0x02 /* hopefully unused now */
|
||
|
||
/*
|
||
* "generation specific" defs of the status result bits:
|
||
*/
|
||
#define p0_door_closed 0x80
|
||
#define p0_caddy_in 0x40
|
||
#define p0_spinning 0x20
|
||
#define p0_check 0x10
|
||
#define p0_success 0x08 /* unused */
|
||
#define p0_busy 0x04
|
||
#define p0_bit_1 0x02 /* unused */
|
||
#define p0_disk_ok 0x01
|
||
|
||
#define pL_disk_in 0x40
|
||
#define pL_spinning 0x20
|
||
#define pL_check 0x10
|
||
#define pL_success 0x08 /* unused ?? */
|
||
#define pL_busy 0x04
|
||
#define pL_door_locked 0x02
|
||
#define pL_door_closed 0x01
|
||
|
||
#define pV_door_closed 0x40
|
||
#define pV_spinning 0x20
|
||
#define pV_check 0x10
|
||
#define pV_success 0x08
|
||
#define pV_busy 0x04
|
||
#define pV_door_locked 0x02
|
||
#define pV_disk_ok 0x01
|
||
|
||
#define p1_door_closed 0x80
|
||
#define p1_disk_in 0x40
|
||
#define p1_spinning 0x20
|
||
#define p1_check 0x10
|
||
#define p1_busy 0x08
|
||
#define p1_door_locked 0x04
|
||
#define p1_bit_1 0x02 /* unused */
|
||
#define p1_disk_ok 0x01
|
||
|
||
#define p2_disk_ok 0x80
|
||
#define p2_door_locked 0x40
|
||
#define p2_spinning 0x20
|
||
#define p2_busy2 0x10
|
||
#define p2_busy1 0x08
|
||
#define p2_door_closed 0x04
|
||
#define p2_disk_in 0x02
|
||
#define p2_check 0x01
|
||
|
||
/*
|
||
* used drive states:
|
||
*/
|
||
#define st_door_closed (current_drive->status_bits&p_door_closed)
|
||
#define st_caddy_in (current_drive->status_bits&p_caddy_in)
|
||
#define st_spinning (current_drive->status_bits&p_spinning)
|
||
#define st_check (current_drive->status_bits&p_check)
|
||
#define st_busy (current_drive->status_bits&p_busy_new)
|
||
#define st_door_locked (current_drive->status_bits&p_door_locked)
|
||
#define st_diskok (current_drive->status_bits&p_disk_ok)
|
||
|
||
/*
|
||
* bits of the CDi_status register:
|
||
*/
|
||
#define s_not_result_ready 0x04 /* 0: "result ready" */
|
||
#define s_not_data_ready 0x02 /* 0: "data ready" */
|
||
#define s_attention 0x01 /* 1: "attention required" */
|
||
/*
|
||
* usable as:
|
||
*/
|
||
#define DRV_ATTN ((inb(CDi_status)&s_attention)!=0)
|
||
#define DATA_READY ((inb(CDi_status)&s_not_data_ready)==0)
|
||
#define RESULT_READY ((inb(CDi_status)&s_not_result_ready)==0)
|
||
|
||
/*
|
||
* drive families and types (firmware versions):
|
||
*/
|
||
#define drv_fam0 0x0100 /* CR-52x family */
|
||
#define drv_199 (drv_fam0+0x01) /* <200 */
|
||
#define drv_200 (drv_fam0+0x02) /* <201 */
|
||
#define drv_201 (drv_fam0+0x03) /* <210 */
|
||
#define drv_210 (drv_fam0+0x04) /* <211 */
|
||
#define drv_211 (drv_fam0+0x05) /* <300 */
|
||
#define drv_300 (drv_fam0+0x06) /* >=300 */
|
||
|
||
#define drv_fam1 0x0200 /* CR-56x family */
|
||
#define drv_099 (drv_fam1+0x01) /* <100 */
|
||
#define drv_100 (drv_fam1+0x02) /* >=100, only 1.02 and 5.00 known */
|
||
|
||
#define drv_fam2 0x0400 /* CD200 family */
|
||
|
||
#define drv_famT 0x0800 /* TEAC CD-55A */
|
||
|
||
#define drv_famL 0x1000 /* Longshine family */
|
||
#define drv_260 (drv_famL+0x01) /* LCS-7260 */
|
||
#define drv_e1 (drv_famL+0x01) /* LCS-7260, firmware "A E1" */
|
||
#define drv_f4 (drv_famL+0x02) /* LCS-7260, firmware "A4F4" */
|
||
|
||
#define drv_famV 0x2000 /* ECS-AT (vertos-100) family */
|
||
#define drv_at (drv_famV+0x01) /* ECS-AT, firmware "1.00" */
|
||
|
||
#define fam0_drive (current_drive->drv_type&drv_fam0)
|
||
#define famL_drive (current_drive->drv_type&drv_famL)
|
||
#define famV_drive (current_drive->drv_type&drv_famV)
|
||
#define fam1_drive (current_drive->drv_type&drv_fam1)
|
||
#define fam2_drive (current_drive->drv_type&drv_fam2)
|
||
#define famT_drive (current_drive->drv_type&drv_famT)
|
||
#define fam0L_drive (current_drive->drv_type&(drv_fam0|drv_famL))
|
||
#define fam0V_drive (current_drive->drv_type&(drv_fam0|drv_famV))
|
||
#define famLV_drive (current_drive->drv_type&(drv_famL|drv_famV))
|
||
#define fam0LV_drive (current_drive->drv_type&(drv_fam0|drv_famL|drv_famV))
|
||
#define fam1L_drive (current_drive->drv_type&(drv_fam1|drv_famL))
|
||
#define fam1V_drive (current_drive->drv_type&(drv_fam1|drv_famV))
|
||
#define fam1LV_drive (current_drive->drv_type&(drv_fam1|drv_famL|drv_famV))
|
||
#define fam01_drive (current_drive->drv_type&(drv_fam0|drv_fam1))
|
||
#define fam12_drive (current_drive->drv_type&(drv_fam1|drv_fam2))
|
||
#define fam2T_drive (current_drive->drv_type&(drv_fam2|drv_famT))
|
||
|
||
/*
|
||
* audio states:
|
||
*/
|
||
#define audio_completed 3 /* Forgot this one! --AJK */
|
||
#define audio_playing 2
|
||
#define audio_pausing 1
|
||
|
||
/*
|
||
* drv_pattern, drv_options:
|
||
*/
|
||
#define speed_auto 0x80
|
||
#define speed_300 0x40
|
||
#define speed_150 0x20
|
||
#define audio_mono 0x04
|
||
|
||
/*
|
||
* values of cmd_type (0 else):
|
||
*/
|
||
#define READ_M1 0x01 /* "data mode 1": 2048 bytes per frame */
|
||
#define READ_M2 0x02 /* "data mode 2": 12+2048+280 bytes per frame */
|
||
#define READ_SC 0x04 /* "subchannel info": 96 bytes per frame */
|
||
#define READ_AU 0x08 /* "audio frame": 2352 bytes per frame */
|
||
|
||
/*
|
||
* sense_byte:
|
||
*
|
||
* values: 00
|
||
* 01
|
||
* 81
|
||
* 82 "raw audio" mode
|
||
* xx from infobuf[0] after 85 00 00 00 00 00 00
|
||
*/
|
||
|
||
/* audio status (bin) */
|
||
#define aud_00 0x00 /* Audio status byte not supported or not valid */
|
||
#define audx11 0x0b /* Audio play operation in progress */
|
||
#define audx12 0x0c /* Audio play operation paused */
|
||
#define audx13 0x0d /* Audio play operation successfully completed */
|
||
#define audx14 0x0e /* Audio play operation stopped due to error */
|
||
#define audx15 0x0f /* No current audio status to return */
|
||
/* audio status (bcd) */
|
||
#define aud_11 0x11 /* Audio play operation in progress */
|
||
#define aud_12 0x12 /* Audio play operation paused */
|
||
#define aud_13 0x13 /* Audio play operation successfully completed */
|
||
#define aud_14 0x14 /* Audio play operation stopped due to error */
|
||
#define aud_15 0x15 /* No current audio status to return */
|
||
|
||
/*
|
||
* highest allowed drive number (MINOR+1)
|
||
*/
|
||
#define NR_SBPCD 4
|
||
|
||
/*
|
||
* we try to never disable interrupts - seems to work
|
||
*/
|
||
#define SBPCD_DIS_IRQ 0
|
||
|
||
/*
|
||
* "write byte to port"
|
||
*/
|
||
#define OUT(x,y) outb(y,x)
|
||
|
||
/*==========================================================================*/
|
||
|
||
#define MIXER_addr SOUND_BASE+4 /* sound card's address register */
|
||
#define MIXER_data SOUND_BASE+5 /* sound card's data register */
|
||
#define MIXER_CD_Volume 0x28 /* internal SB Pro register address */
|
||
|
||
/*==========================================================================*/
|
||
|
||
#define MAX_TRACKS 99
|
||
|
||
#define ERR_DISKCHANGE 615
|
||
|
||
/*==========================================================================*/
|
||
/*
|
||
* To make conversions easier (machine dependent!)
|
||
*/
|
||
typedef union _msf
|
||
{
|
||
u_int n;
|
||
u_char c[4];
|
||
} MSF;
|
||
|
||
typedef union _blk
|
||
{
|
||
u_int n;
|
||
u_char c[4];
|
||
} BLK;
|
||
|
||
/*==========================================================================*/
|
||
|
||
/*============================================================================
|
||
==============================================================================
|
||
|
||
COMMAND SET of "old" drives like CR-521, CR-522
|
||
(the CR-562 family is different):
|
||
|
||
No. Command Code
|
||
--------------------------------------------
|
||
|
||
Drive Commands:
|
||
1 Seek 01
|
||
2 Read Data 02
|
||
3 Read XA-Data 03
|
||
4 Read Header 04
|
||
5 Spin Up 05
|
||
6 Spin Down 06
|
||
7 Diagnostic 07
|
||
8 Read UPC 08
|
||
9 Read ISRC 09
|
||
10 Play Audio 0A
|
||
11 Play Audio MSF 0B
|
||
12 Play Audio Track/Index 0C
|
||
|
||
Status Commands:
|
||
13 Read Status 81
|
||
14 Read Error 82
|
||
15 Read Drive Version 83
|
||
16 Mode Select 84
|
||
17 Mode Sense 85
|
||
18 Set XA Parameter 86
|
||
19 Read XA Parameter 87
|
||
20 Read Capacity 88
|
||
21 Read SUB_Q 89
|
||
22 Read Disc Code 8A
|
||
23 Read Disc Information 8B
|
||
24 Read TOC 8C
|
||
25 Pause/Resume 8D
|
||
26 Read Packet 8E
|
||
27 Read Path Check 00
|
||
|
||
|
||
all numbers (lba, msf-bin, msf-bcd, counts) to transfer high byte first
|
||
|
||
mnemo 7-byte command #bytes response (r0...rn)
|
||
________ ____________________ ____
|
||
|
||
Read Status:
|
||
status: 81. (1) one-byte command, gives the main
|
||
status byte
|
||
Read Error:
|
||
check1: 82 00 00 00 00 00 00. (6) r1: audio status
|
||
|
||
Read Packet:
|
||
check2: 8e xx 00 00 00 00 00. (xx) gets xx bytes response, relating
|
||
to commands 01 04 05 07 08 09
|
||
|
||
Play Audio:
|
||
play: 0a ll-bb-aa nn-nn-nn. (0) play audio, ll-bb-aa: starting block (lba),
|
||
nn-nn-nn: #blocks
|
||
Play Audio MSF:
|
||
0b mm-ss-ff mm-ss-ff (0) play audio from/to
|
||
|
||
Play Audio Track/Index:
|
||
0c ...
|
||
|
||
Pause/Resume:
|
||
pause: 8d pr 00 00 00 00 00. (0) pause (pr=00)
|
||
resume (pr=80) audio playing
|
||
|
||
Mode Select:
|
||
84 00 nn-nn ??.?? 00 (0) nn-nn: 2048 or 2340
|
||
possibly defines transfer size
|
||
|
||
set_vol: 84 83 00 00 sw le 00. (0) sw(itch): lrxxxxxx (off=1)
|
||
le(vel): min=0, max=FF, else half
|
||
(firmware 2.11)
|
||
|
||
Mode Sense:
|
||
get_vol: 85 03 00 00 00 00 00. (2) tell current audio volume setting
|
||
|
||
Read Disc Information:
|
||
tocdesc: 8b 00 00 00 00 00 00. (6) read the toc descriptor ("msf-bin"-format)
|
||
|
||
Read TOC:
|
||
tocent: 8c fl nn 00 00 00 00. (8) read toc entry #nn
|
||
(fl=0:"lba"-, =2:"msf-bin"-format)
|
||
|
||
Read Capacity:
|
||
capacit: 88 00 00 00 00 00 00. (5) "read CD-ROM capacity"
|
||
|
||
|
||
Read Path Check:
|
||
ping: 00 00 00 00 00 00 00. (2) r0=AA, r1=55
|
||
("ping" if the drive is connected)
|
||
|
||
Read Drive Version:
|
||
ident: 83 00 00 00 00 00 00. (12) gives "MATSHITAn.nn"
|
||
(n.nn = 2.01, 2.11., 3.00, ...)
|
||
|
||
Seek:
|
||
seek: 01 00 ll-bb-aa 00 00. (0)
|
||
seek: 01 02 mm-ss-ff 00 00. (0)
|
||
|
||
Read Data:
|
||
read: 02 xx-xx-xx nn-nn fl. (?) read nn-nn blocks of 2048 bytes,
|
||
starting at block xx-xx-xx
|
||
fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
|
||
|
||
Read XA-Data:
|
||
read: 03 xx-xx-xx nn-nn fl. (?) read nn-nn blocks of 2340 bytes,
|
||
starting at block xx-xx-xx
|
||
fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
|
||
|
||
Read SUB_Q:
|
||
89 fl 00 00 00 00 00. (13) r0: audio status, r4-r7: lba/msf,
|
||
fl=0: "lba", fl=2: "msf"
|
||
|
||
Read Disc Code:
|
||
8a 00 00 00 00 00 00. (14) possibly extended "check condition"-info
|
||
|
||
Read Header:
|
||
04 00 ll-bb-aa 00 00. (0) 4 bytes response with "check2"
|
||
04 02 mm-ss-ff 00 00. (0) 4 bytes response with "check2"
|
||
|
||
Spin Up:
|
||
05 00 ll-bb-aa 00 00. (0) possibly implies a "seek"
|
||
|
||
Spin Down:
|
||
06 ...
|
||
|
||
Diagnostic:
|
||
07 00 ll-bb-aa 00 00. (2) 2 bytes response with "check2"
|
||
07 02 mm-ss-ff 00 00. (2) 2 bytes response with "check2"
|
||
|
||
Read UPC:
|
||
08 00 ll-bb-aa 00 00. (16)
|
||
08 02 mm-ss-ff 00 00. (16)
|
||
|
||
Read ISRC:
|
||
09 00 ll-bb-aa 00 00. (15) 15 bytes response with "check2"
|
||
09 02 mm-ss-ff 00 00. (15) 15 bytes response with "check2"
|
||
|
||
Set XA Parameter:
|
||
86 ...
|
||
|
||
Read XA Parameter:
|
||
87 ...
|
||
|
||
==============================================================================
|
||
============================================================================*/
|
||
|
||
/*
|
||
* commands
|
||
*
|
||
* CR-52x: CMD0_
|
||
* CR-56x: CMD1_
|
||
* CD200: CMD2_
|
||
* LCS-7260: CMDL_
|
||
* TEAC CD-55A: CMDT_
|
||
* ECS-AT: CMDV_
|
||
*/
|
||
#define CMD1_RESET 0x0a
|
||
#define CMD2_RESET 0x01
|
||
#define CMDT_RESET 0xc0
|
||
|
||
#define CMD1_LOCK_CTL 0x0c
|
||
#define CMD2_LOCK_CTL 0x1e
|
||
#define CMDT_LOCK_CTL CMD2_LOCK_CTL
|
||
#define CMDL_LOCK_CTL 0x0e
|
||
#define CMDV_LOCK_CTL CMDL_LOCK_CTL
|
||
|
||
#define CMD1_TRAY_CTL 0x07
|
||
#define CMD2_TRAY_CTL 0x1b
|
||
#define CMDT_TRAY_CTL CMD2_TRAY_CTL
|
||
#define CMDL_TRAY_CTL 0x0d
|
||
#define CMDV_TRAY_CTL CMDL_TRAY_CTL
|
||
|
||
#define CMD1_MULTISESS 0x8d
|
||
#define CMDL_MULTISESS 0x8c
|
||
#define CMDV_MULTISESS CMDL_MULTISESS
|
||
|
||
#define CMD1_SUBCHANINF 0x11
|
||
#define CMD2_SUBCHANINF 0x??
|
||
|
||
#define CMD1_ABORT 0x08
|
||
#define CMD2_ABORT 0x08
|
||
#define CMDT_ABORT 0x08
|
||
|
||
#define CMD2_x02 0x02
|
||
|
||
#define CMD2_SETSPEED 0xda
|
||
|
||
#define CMD0_PATH_CHECK 0x00
|
||
#define CMD1_PATH_CHECK 0x???
|
||
#define CMD2_PATH_CHECK 0x???
|
||
#define CMDT_PATH_CHECK 0x???
|
||
#define CMDL_PATH_CHECK CMD0_PATH_CHECK
|
||
#define CMDV_PATH_CHECK CMD0_PATH_CHECK
|
||
|
||
#define CMD0_SEEK 0x01
|
||
#define CMD1_SEEK CMD0_SEEK
|
||
#define CMD2_SEEK 0x2b
|
||
#define CMDT_SEEK CMD2_SEEK
|
||
#define CMDL_SEEK CMD0_SEEK
|
||
#define CMDV_SEEK CMD0_SEEK
|
||
|
||
#define CMD0_READ 0x02
|
||
#define CMD1_READ 0x10
|
||
#define CMD2_READ 0x28
|
||
#define CMDT_READ CMD2_READ
|
||
#define CMDL_READ CMD0_READ
|
||
#define CMDV_READ CMD0_READ
|
||
|
||
#define CMD0_READ_XA 0x03
|
||
#define CMD2_READ_XA 0xd4
|
||
#define CMD2_READ_XA2 0xd5
|
||
#define CMDL_READ_XA CMD0_READ_XA /* really ?? */
|
||
#define CMDV_READ_XA CMD0_READ_XA
|
||
|
||
#define CMD0_READ_HEAD 0x04
|
||
|
||
#define CMD0_SPINUP 0x05
|
||
#define CMD1_SPINUP 0x02
|
||
#define CMD2_SPINUP CMD2_TRAY_CTL
|
||
#define CMDL_SPINUP CMD0_SPINUP
|
||
#define CMDV_SPINUP CMD0_SPINUP
|
||
|
||
#define CMD0_SPINDOWN 0x06 /* really??? */
|
||
#define CMD1_SPINDOWN 0x06
|
||
#define CMD2_SPINDOWN CMD2_TRAY_CTL
|
||
#define CMDL_SPINDOWN 0x0d
|
||
#define CMDV_SPINDOWN CMD0_SPINDOWN
|
||
|
||
#define CMD0_DIAG 0x07
|
||
|
||
#define CMD0_READ_UPC 0x08
|
||
#define CMD1_READ_UPC 0x88
|
||
#define CMD2_READ_UPC 0x???
|
||
#define CMDL_READ_UPC CMD0_READ_UPC
|
||
#define CMDV_READ_UPC 0x8f
|
||
|
||
#define CMD0_READ_ISRC 0x09
|
||
|
||
#define CMD0_PLAY 0x0a
|
||
#define CMD1_PLAY 0x???
|
||
#define CMD2_PLAY 0x???
|
||
#define CMDL_PLAY CMD0_PLAY
|
||
#define CMDV_PLAY CMD0_PLAY
|
||
|
||
#define CMD0_PLAY_MSF 0x0b
|
||
#define CMD1_PLAY_MSF 0x0e
|
||
#define CMD2_PLAY_MSF 0x47
|
||
#define CMDT_PLAY_MSF CMD2_PLAY_MSF
|
||
#define CMDL_PLAY_MSF 0x???
|
||
|
||
#define CMD0_PLAY_TI 0x0c
|
||
#define CMD1_PLAY_TI 0x0f
|
||
|
||
#define CMD0_STATUS 0x81
|
||
#define CMD1_STATUS 0x05
|
||
#define CMD2_STATUS 0x00
|
||
#define CMDT_STATUS CMD2_STATUS
|
||
#define CMDL_STATUS CMD0_STATUS
|
||
#define CMDV_STATUS CMD0_STATUS
|
||
#define CMD2_SEEK_LEADIN 0x00
|
||
|
||
#define CMD0_READ_ERR 0x82
|
||
#define CMD1_READ_ERR CMD0_READ_ERR
|
||
#define CMD2_READ_ERR 0x03
|
||
#define CMDT_READ_ERR CMD2_READ_ERR /* get audio status */
|
||
#define CMDL_READ_ERR CMD0_READ_ERR
|
||
#define CMDV_READ_ERR CMD0_READ_ERR
|
||
|
||
#define CMD0_READ_VER 0x83
|
||
#define CMD1_READ_VER CMD0_READ_VER
|
||
#define CMD2_READ_VER 0x12
|
||
#define CMDT_READ_VER CMD2_READ_VER /* really ?? */
|
||
#define CMDL_READ_VER CMD0_READ_VER
|
||
#define CMDV_READ_VER CMD0_READ_VER
|
||
|
||
#define CMD0_SETMODE 0x84
|
||
#define CMD1_SETMODE 0x09
|
||
#define CMD2_SETMODE 0x55
|
||
#define CMDT_SETMODE CMD2_SETMODE
|
||
#define CMDL_SETMODE CMD0_SETMODE
|
||
|
||
#define CMD0_GETMODE 0x85
|
||
#define CMD1_GETMODE 0x84
|
||
#define CMD2_GETMODE 0x5a
|
||
#define CMDT_GETMODE CMD2_GETMODE
|
||
#define CMDL_GETMODE CMD0_GETMODE
|
||
|
||
#define CMD0_SET_XA 0x86
|
||
|
||
#define CMD0_GET_XA 0x87
|
||
|
||
#define CMD0_CAPACITY 0x88
|
||
#define CMD1_CAPACITY 0x85
|
||
#define CMD2_CAPACITY 0x25
|
||
#define CMDL_CAPACITY CMD0_CAPACITY /* missing in some firmware versions */
|
||
|
||
#define CMD0_READSUBQ 0x89
|
||
#define CMD1_READSUBQ 0x87
|
||
#define CMD2_READSUBQ 0x42
|
||
#define CMDT_READSUBQ CMD2_READSUBQ
|
||
#define CMDL_READSUBQ CMD0_READSUBQ
|
||
#define CMDV_READSUBQ CMD0_READSUBQ
|
||
|
||
#define CMD0_DISKCODE 0x8a
|
||
|
||
#define CMD0_DISKINFO 0x8b
|
||
#define CMD1_DISKINFO CMD0_DISKINFO
|
||
#define CMD2_DISKINFO 0x43
|
||
#define CMDT_DISKINFO CMD2_DISKINFO
|
||
#define CMDL_DISKINFO CMD0_DISKINFO
|
||
#define CMDV_DISKINFO CMD0_DISKINFO
|
||
|
||
#define CMD0_READTOC 0x8c
|
||
#define CMD1_READTOC CMD0_READTOC
|
||
#define CMD2_READTOC 0x???
|
||
#define CMDL_READTOC CMD0_READTOC
|
||
#define CMDV_READTOC CMD0_READTOC
|
||
|
||
#define CMD0_PAU_RES 0x8d
|
||
#define CMD1_PAU_RES 0x0d
|
||
#define CMD2_PAU_RES 0x4b
|
||
#define CMDT_PAUSE CMD2_PAU_RES
|
||
#define CMDL_PAU_RES CMD0_PAU_RES
|
||
#define CMDV_PAUSE CMD0_PAU_RES
|
||
|
||
#define CMD0_PACKET 0x8e
|
||
#define CMD1_PACKET CMD0_PACKET
|
||
#define CMD2_PACKET 0x???
|
||
#define CMDL_PACKET CMD0_PACKET
|
||
#define CMDV_PACKET 0x???
|
||
|
||
/*==========================================================================*/
|
||
/*==========================================================================*/
|
||
#endif /* _LINUX_SBPCD_H */
|
||
/*==========================================================================*/
|
||
/*
|
||
* Overrides for Emacs so that we follow Linus's tabbing style.
|
||
* Emacs will notice this stuff at the end of the file and automatically
|
||
* adjust the settings for this buffer only. This must remain at the end
|
||
* of the file.
|
||
* ---------------------------------------------------------------------------
|
||
* Local variables:
|
||
* c-indent-level: 8
|
||
* c-brace-imaginary-offset: 0
|
||
* c-brace-offset: -8
|
||
* c-argdecl-indent: 8
|
||
* c-label-offset: -8
|
||
* c-continued-statement-offset: 8
|
||
* c-continued-brace-offset: 0
|
||
* End:
|
||
*/
|