mirror of
https://github.com/torvalds/linux.git
synced 2024-12-11 13:41:55 +00:00
38680bc6b1
Driver is missing the interrupts if two requests are queued up at the same time as the interrupt handler is servicing a request that was just delivered. The ISR clears the interrupt at the end but it could be clearing the interrupt for an outstanding event. Therefore, second interrupt never arrives. Clear the interrupt first and then check for completions. Also, make sure that request start and interrupt clear do not overlap in time by using a spinlock. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
866 lines
23 KiB
C
866 lines
23 KiB
C
/*
|
|
* Qualcomm Technologies HIDMA DMA engine low level code
|
|
*
|
|
* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/highmem.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/atomic.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/kfifo.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include "hidma.h"
|
|
|
|
#define HIDMA_EVRE_SIZE 16 /* each EVRE is 16 bytes */
|
|
|
|
#define HIDMA_TRCA_CTRLSTS_REG 0x000
|
|
#define HIDMA_TRCA_RING_LOW_REG 0x008
|
|
#define HIDMA_TRCA_RING_HIGH_REG 0x00C
|
|
#define HIDMA_TRCA_RING_LEN_REG 0x010
|
|
#define HIDMA_TRCA_DOORBELL_REG 0x400
|
|
|
|
#define HIDMA_EVCA_CTRLSTS_REG 0x000
|
|
#define HIDMA_EVCA_INTCTRL_REG 0x004
|
|
#define HIDMA_EVCA_RING_LOW_REG 0x008
|
|
#define HIDMA_EVCA_RING_HIGH_REG 0x00C
|
|
#define HIDMA_EVCA_RING_LEN_REG 0x010
|
|
#define HIDMA_EVCA_WRITE_PTR_REG 0x020
|
|
#define HIDMA_EVCA_DOORBELL_REG 0x400
|
|
|
|
#define HIDMA_EVCA_IRQ_STAT_REG 0x100
|
|
#define HIDMA_EVCA_IRQ_CLR_REG 0x108
|
|
#define HIDMA_EVCA_IRQ_EN_REG 0x110
|
|
|
|
#define HIDMA_EVRE_CFG_IDX 0
|
|
|
|
#define HIDMA_EVRE_ERRINFO_BIT_POS 24
|
|
#define HIDMA_EVRE_CODE_BIT_POS 28
|
|
|
|
#define HIDMA_EVRE_ERRINFO_MASK GENMASK(3, 0)
|
|
#define HIDMA_EVRE_CODE_MASK GENMASK(3, 0)
|
|
|
|
#define HIDMA_CH_CONTROL_MASK GENMASK(7, 0)
|
|
#define HIDMA_CH_STATE_MASK GENMASK(7, 0)
|
|
#define HIDMA_CH_STATE_BIT_POS 0x8
|
|
|
|
#define HIDMA_IRQ_EV_CH_EOB_IRQ_BIT_POS 0
|
|
#define HIDMA_IRQ_EV_CH_WR_RESP_BIT_POS 1
|
|
#define HIDMA_IRQ_TR_CH_TRE_RD_RSP_ER_BIT_POS 9
|
|
#define HIDMA_IRQ_TR_CH_DATA_RD_ER_BIT_POS 10
|
|
#define HIDMA_IRQ_TR_CH_DATA_WR_ER_BIT_POS 11
|
|
#define HIDMA_IRQ_TR_CH_INVALID_TRE_BIT_POS 14
|
|
|
|
#define ENABLE_IRQS (BIT(HIDMA_IRQ_EV_CH_EOB_IRQ_BIT_POS) | \
|
|
BIT(HIDMA_IRQ_EV_CH_WR_RESP_BIT_POS) | \
|
|
BIT(HIDMA_IRQ_TR_CH_TRE_RD_RSP_ER_BIT_POS) | \
|
|
BIT(HIDMA_IRQ_TR_CH_DATA_RD_ER_BIT_POS) | \
|
|
BIT(HIDMA_IRQ_TR_CH_DATA_WR_ER_BIT_POS) | \
|
|
BIT(HIDMA_IRQ_TR_CH_INVALID_TRE_BIT_POS))
|
|
|
|
#define HIDMA_INCREMENT_ITERATOR(iter, size, ring_size) \
|
|
do { \
|
|
iter += size; \
|
|
if (iter >= ring_size) \
|
|
iter -= ring_size; \
|
|
} while (0)
|
|
|
|
#define HIDMA_CH_STATE(val) \
|
|
((val >> HIDMA_CH_STATE_BIT_POS) & HIDMA_CH_STATE_MASK)
|
|
|
|
#define HIDMA_ERR_INT_MASK \
|
|
(BIT(HIDMA_IRQ_TR_CH_INVALID_TRE_BIT_POS) | \
|
|
BIT(HIDMA_IRQ_TR_CH_TRE_RD_RSP_ER_BIT_POS) | \
|
|
BIT(HIDMA_IRQ_EV_CH_WR_RESP_BIT_POS) | \
|
|
BIT(HIDMA_IRQ_TR_CH_DATA_RD_ER_BIT_POS) | \
|
|
BIT(HIDMA_IRQ_TR_CH_DATA_WR_ER_BIT_POS))
|
|
|
|
enum ch_command {
|
|
HIDMA_CH_DISABLE = 0,
|
|
HIDMA_CH_ENABLE = 1,
|
|
HIDMA_CH_SUSPEND = 2,
|
|
HIDMA_CH_RESET = 9,
|
|
};
|
|
|
|
enum ch_state {
|
|
HIDMA_CH_DISABLED = 0,
|
|
HIDMA_CH_ENABLED = 1,
|
|
HIDMA_CH_RUNNING = 2,
|
|
HIDMA_CH_SUSPENDED = 3,
|
|
HIDMA_CH_STOPPED = 4,
|
|
};
|
|
|
|
enum err_code {
|
|
HIDMA_EVRE_STATUS_COMPLETE = 1,
|
|
HIDMA_EVRE_STATUS_ERROR = 4,
|
|
};
|
|
|
|
static int hidma_is_chan_enabled(int state)
|
|
{
|
|
switch (state) {
|
|
case HIDMA_CH_ENABLED:
|
|
case HIDMA_CH_RUNNING:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
void hidma_ll_free(struct hidma_lldev *lldev, u32 tre_ch)
|
|
{
|
|
struct hidma_tre *tre;
|
|
|
|
if (tre_ch >= lldev->nr_tres) {
|
|
dev_err(lldev->dev, "invalid TRE number in free:%d", tre_ch);
|
|
return;
|
|
}
|
|
|
|
tre = &lldev->trepool[tre_ch];
|
|
if (atomic_read(&tre->allocated) != true) {
|
|
dev_err(lldev->dev, "trying to free an unused TRE:%d", tre_ch);
|
|
return;
|
|
}
|
|
|
|
atomic_set(&tre->allocated, 0);
|
|
}
|
|
|
|
int hidma_ll_request(struct hidma_lldev *lldev, u32 sig, const char *dev_name,
|
|
void (*callback)(void *data), void *data, u32 *tre_ch)
|
|
{
|
|
unsigned int i;
|
|
struct hidma_tre *tre;
|
|
u32 *tre_local;
|
|
|
|
if (!tre_ch || !lldev)
|
|
return -EINVAL;
|
|
|
|
/* need to have at least one empty spot in the queue */
|
|
for (i = 0; i < lldev->nr_tres - 1; i++) {
|
|
if (atomic_add_unless(&lldev->trepool[i].allocated, 1, 1))
|
|
break;
|
|
}
|
|
|
|
if (i == (lldev->nr_tres - 1))
|
|
return -ENOMEM;
|
|
|
|
tre = &lldev->trepool[i];
|
|
tre->dma_sig = sig;
|
|
tre->dev_name = dev_name;
|
|
tre->callback = callback;
|
|
tre->data = data;
|
|
tre->idx = i;
|
|
tre->status = 0;
|
|
tre->queued = 0;
|
|
tre->err_code = 0;
|
|
tre->err_info = 0;
|
|
tre->lldev = lldev;
|
|
tre_local = &tre->tre_local[0];
|
|
tre_local[HIDMA_TRE_CFG_IDX] = (lldev->chidx & 0xFF) << 8;
|
|
tre_local[HIDMA_TRE_CFG_IDX] |= BIT(16); /* set IEOB */
|
|
*tre_ch = i;
|
|
if (callback)
|
|
callback(data);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Multiple TREs may be queued and waiting in the pending queue.
|
|
*/
|
|
static void hidma_ll_tre_complete(unsigned long arg)
|
|
{
|
|
struct hidma_lldev *lldev = (struct hidma_lldev *)arg;
|
|
struct hidma_tre *tre;
|
|
|
|
while (kfifo_out(&lldev->handoff_fifo, &tre, 1)) {
|
|
/* call the user if it has been read by the hardware */
|
|
if (tre->callback)
|
|
tre->callback(tre->data);
|
|
}
|
|
}
|
|
|
|
static int hidma_post_completed(struct hidma_lldev *lldev, u8 err_info,
|
|
u8 err_code)
|
|
{
|
|
struct hidma_tre *tre;
|
|
unsigned long flags;
|
|
u32 tre_iterator;
|
|
|
|
spin_lock_irqsave(&lldev->lock, flags);
|
|
|
|
tre_iterator = lldev->tre_processed_off;
|
|
tre = lldev->pending_tre_list[tre_iterator / HIDMA_TRE_SIZE];
|
|
if (!tre) {
|
|
spin_unlock_irqrestore(&lldev->lock, flags);
|
|
dev_warn(lldev->dev, "tre_index [%d] and tre out of sync\n",
|
|
tre_iterator / HIDMA_TRE_SIZE);
|
|
return -EINVAL;
|
|
}
|
|
lldev->pending_tre_list[tre->tre_index] = NULL;
|
|
|
|
/*
|
|
* Keep track of pending TREs that SW is expecting to receive
|
|
* from HW. We got one now. Decrement our counter.
|
|
*/
|
|
if (atomic_dec_return(&lldev->pending_tre_count) < 0) {
|
|
dev_warn(lldev->dev, "tre count mismatch on completion");
|
|
atomic_set(&lldev->pending_tre_count, 0);
|
|
}
|
|
|
|
HIDMA_INCREMENT_ITERATOR(tre_iterator, HIDMA_TRE_SIZE,
|
|
lldev->tre_ring_size);
|
|
lldev->tre_processed_off = tre_iterator;
|
|
spin_unlock_irqrestore(&lldev->lock, flags);
|
|
|
|
tre->err_info = err_info;
|
|
tre->err_code = err_code;
|
|
tre->queued = 0;
|
|
|
|
kfifo_put(&lldev->handoff_fifo, tre);
|
|
tasklet_schedule(&lldev->task);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Called to handle the interrupt for the channel.
|
|
* Return a positive number if TRE or EVRE were consumed on this run.
|
|
* Return a positive number if there are pending TREs or EVREs.
|
|
* Return 0 if there is nothing to consume or no pending TREs/EVREs found.
|
|
*/
|
|
static int hidma_handle_tre_completion(struct hidma_lldev *lldev)
|
|
{
|
|
u32 evre_ring_size = lldev->evre_ring_size;
|
|
u32 err_info, err_code, evre_write_off;
|
|
u32 evre_iterator;
|
|
u32 num_completed = 0;
|
|
|
|
evre_write_off = readl_relaxed(lldev->evca + HIDMA_EVCA_WRITE_PTR_REG);
|
|
evre_iterator = lldev->evre_processed_off;
|
|
|
|
if ((evre_write_off > evre_ring_size) ||
|
|
(evre_write_off % HIDMA_EVRE_SIZE)) {
|
|
dev_err(lldev->dev, "HW reports invalid EVRE write offset\n");
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* By the time control reaches here the number of EVREs and TREs
|
|
* may not match. Only consume the ones that hardware told us.
|
|
*/
|
|
while ((evre_iterator != evre_write_off)) {
|
|
u32 *current_evre = lldev->evre_ring + evre_iterator;
|
|
u32 cfg;
|
|
|
|
cfg = current_evre[HIDMA_EVRE_CFG_IDX];
|
|
err_info = cfg >> HIDMA_EVRE_ERRINFO_BIT_POS;
|
|
err_info &= HIDMA_EVRE_ERRINFO_MASK;
|
|
err_code =
|
|
(cfg >> HIDMA_EVRE_CODE_BIT_POS) & HIDMA_EVRE_CODE_MASK;
|
|
|
|
if (hidma_post_completed(lldev, err_info, err_code))
|
|
break;
|
|
|
|
HIDMA_INCREMENT_ITERATOR(evre_iterator, HIDMA_EVRE_SIZE,
|
|
evre_ring_size);
|
|
|
|
/*
|
|
* Read the new event descriptor written by the HW.
|
|
* As we are processing the delivered events, other events
|
|
* get queued to the SW for processing.
|
|
*/
|
|
evre_write_off =
|
|
readl_relaxed(lldev->evca + HIDMA_EVCA_WRITE_PTR_REG);
|
|
num_completed++;
|
|
|
|
/*
|
|
* An error interrupt might have arrived while we are processing
|
|
* the completed interrupt.
|
|
*/
|
|
if (!hidma_ll_isenabled(lldev))
|
|
break;
|
|
}
|
|
|
|
if (num_completed) {
|
|
u32 evre_read_off = (lldev->evre_processed_off +
|
|
HIDMA_EVRE_SIZE * num_completed);
|
|
evre_read_off = evre_read_off % evre_ring_size;
|
|
writel(evre_read_off, lldev->evca + HIDMA_EVCA_DOORBELL_REG);
|
|
|
|
/* record the last processed tre offset */
|
|
lldev->evre_processed_off = evre_read_off;
|
|
}
|
|
|
|
return num_completed;
|
|
}
|
|
|
|
void hidma_cleanup_pending_tre(struct hidma_lldev *lldev, u8 err_info,
|
|
u8 err_code)
|
|
{
|
|
while (atomic_read(&lldev->pending_tre_count)) {
|
|
if (hidma_post_completed(lldev, err_info, err_code))
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int hidma_ll_reset(struct hidma_lldev *lldev)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
|
|
val = readl(lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
|
|
val &= ~(HIDMA_CH_CONTROL_MASK << 16);
|
|
val |= HIDMA_CH_RESET << 16;
|
|
writel(val, lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
|
|
|
|
/*
|
|
* Delay 10ms after reset to allow DMA logic to quiesce.
|
|
* Do a polled read up to 1ms and 10ms maximum.
|
|
*/
|
|
ret = readl_poll_timeout(lldev->trca + HIDMA_TRCA_CTRLSTS_REG, val,
|
|
HIDMA_CH_STATE(val) == HIDMA_CH_DISABLED,
|
|
1000, 10000);
|
|
if (ret) {
|
|
dev_err(lldev->dev, "transfer channel did not reset\n");
|
|
return ret;
|
|
}
|
|
|
|
val = readl(lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
|
|
val &= ~(HIDMA_CH_CONTROL_MASK << 16);
|
|
val |= HIDMA_CH_RESET << 16;
|
|
writel(val, lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
|
|
|
|
/*
|
|
* Delay 10ms after reset to allow DMA logic to quiesce.
|
|
* Do a polled read up to 1ms and 10ms maximum.
|
|
*/
|
|
ret = readl_poll_timeout(lldev->evca + HIDMA_EVCA_CTRLSTS_REG, val,
|
|
HIDMA_CH_STATE(val) == HIDMA_CH_DISABLED,
|
|
1000, 10000);
|
|
if (ret)
|
|
return ret;
|
|
|
|
lldev->trch_state = HIDMA_CH_DISABLED;
|
|
lldev->evch_state = HIDMA_CH_DISABLED;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The interrupt handler for HIDMA will try to consume as many pending
|
|
* EVRE from the event queue as possible. Each EVRE has an associated
|
|
* TRE that holds the user interface parameters. EVRE reports the
|
|
* result of the transaction. Hardware guarantees ordering between EVREs
|
|
* and TREs. We use last processed offset to figure out which TRE is
|
|
* associated with which EVRE. If two TREs are consumed by HW, the EVREs
|
|
* are in order in the event ring.
|
|
*
|
|
* This handler will do a one pass for consuming EVREs. Other EVREs may
|
|
* be delivered while we are working. It will try to consume incoming
|
|
* EVREs one more time and return.
|
|
*
|
|
* For unprocessed EVREs, hardware will trigger another interrupt until
|
|
* all the interrupt bits are cleared.
|
|
*
|
|
* Hardware guarantees that by the time interrupt is observed, all data
|
|
* transactions in flight are delivered to their respective places and
|
|
* are visible to the CPU.
|
|
*
|
|
* On demand paging for IOMMU is only supported for PCIe via PRI
|
|
* (Page Request Interface) not for HIDMA. All other hardware instances
|
|
* including HIDMA work on pinned DMA addresses.
|
|
*
|
|
* HIDMA is not aware of IOMMU presence since it follows the DMA API. All
|
|
* IOMMU latency will be built into the data movement time. By the time
|
|
* interrupt happens, IOMMU lookups + data movement has already taken place.
|
|
*
|
|
* While the first read in a typical PCI endpoint ISR flushes all outstanding
|
|
* requests traditionally to the destination, this concept does not apply
|
|
* here for this HW.
|
|
*/
|
|
static void hidma_ll_int_handler_internal(struct hidma_lldev *lldev, int cause)
|
|
{
|
|
unsigned long irqflags;
|
|
|
|
if (cause & HIDMA_ERR_INT_MASK) {
|
|
dev_err(lldev->dev, "error 0x%x, disabling...\n",
|
|
cause);
|
|
|
|
/* Clear out pending interrupts */
|
|
writel(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
|
|
|
|
/* No further submissions. */
|
|
hidma_ll_disable(lldev);
|
|
|
|
/* Driver completes the txn and intimates the client.*/
|
|
hidma_cleanup_pending_tre(lldev, 0xFF,
|
|
HIDMA_EVRE_STATUS_ERROR);
|
|
|
|
return;
|
|
}
|
|
|
|
spin_lock_irqsave(&lldev->lock, irqflags);
|
|
writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
|
|
spin_unlock_irqrestore(&lldev->lock, irqflags);
|
|
|
|
/*
|
|
* Fine tuned for this HW...
|
|
*
|
|
* This ISR has been designed for this particular hardware. Relaxed
|
|
* read and write accessors are used for performance reasons due to
|
|
* interrupt delivery guarantees. Do not copy this code blindly and
|
|
* expect that to work.
|
|
*
|
|
* Try to consume as many EVREs as possible.
|
|
*/
|
|
hidma_handle_tre_completion(lldev);
|
|
}
|
|
|
|
irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
|
|
{
|
|
struct hidma_lldev *lldev = arg;
|
|
u32 status;
|
|
u32 enable;
|
|
u32 cause;
|
|
|
|
status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
|
|
enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
|
|
cause = status & enable;
|
|
|
|
while (cause) {
|
|
hidma_ll_int_handler_internal(lldev, cause);
|
|
|
|
/*
|
|
* Another interrupt might have arrived while we are
|
|
* processing this one. Read the new cause.
|
|
*/
|
|
status = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
|
|
enable = readl_relaxed(lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
|
|
cause = status & enable;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
irqreturn_t hidma_ll_inthandler_msi(int chirq, void *arg, int cause)
|
|
{
|
|
struct hidma_lldev *lldev = arg;
|
|
|
|
hidma_ll_int_handler_internal(lldev, cause);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
int hidma_ll_enable(struct hidma_lldev *lldev)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
|
|
val = readl(lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
|
|
val &= ~(HIDMA_CH_CONTROL_MASK << 16);
|
|
val |= HIDMA_CH_ENABLE << 16;
|
|
writel(val, lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
|
|
|
|
ret = readl_poll_timeout(lldev->evca + HIDMA_EVCA_CTRLSTS_REG, val,
|
|
hidma_is_chan_enabled(HIDMA_CH_STATE(val)),
|
|
1000, 10000);
|
|
if (ret) {
|
|
dev_err(lldev->dev, "event channel did not get enabled\n");
|
|
return ret;
|
|
}
|
|
|
|
val = readl(lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
|
|
val &= ~(HIDMA_CH_CONTROL_MASK << 16);
|
|
val |= HIDMA_CH_ENABLE << 16;
|
|
writel(val, lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
|
|
|
|
ret = readl_poll_timeout(lldev->trca + HIDMA_TRCA_CTRLSTS_REG, val,
|
|
hidma_is_chan_enabled(HIDMA_CH_STATE(val)),
|
|
1000, 10000);
|
|
if (ret) {
|
|
dev_err(lldev->dev, "transfer channel did not get enabled\n");
|
|
return ret;
|
|
}
|
|
|
|
lldev->trch_state = HIDMA_CH_ENABLED;
|
|
lldev->evch_state = HIDMA_CH_ENABLED;
|
|
|
|
/* enable irqs */
|
|
writel(ENABLE_IRQS, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void hidma_ll_start(struct hidma_lldev *lldev)
|
|
{
|
|
unsigned long irqflags;
|
|
|
|
spin_lock_irqsave(&lldev->lock, irqflags);
|
|
writel(lldev->tre_write_offset, lldev->trca + HIDMA_TRCA_DOORBELL_REG);
|
|
spin_unlock_irqrestore(&lldev->lock, irqflags);
|
|
}
|
|
|
|
bool hidma_ll_isenabled(struct hidma_lldev *lldev)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
|
|
lldev->trch_state = HIDMA_CH_STATE(val);
|
|
val = readl(lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
|
|
lldev->evch_state = HIDMA_CH_STATE(val);
|
|
|
|
/* both channels have to be enabled before calling this function */
|
|
if (hidma_is_chan_enabled(lldev->trch_state) &&
|
|
hidma_is_chan_enabled(lldev->evch_state))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
void hidma_ll_queue_request(struct hidma_lldev *lldev, u32 tre_ch)
|
|
{
|
|
struct hidma_tre *tre;
|
|
unsigned long flags;
|
|
|
|
tre = &lldev->trepool[tre_ch];
|
|
|
|
/* copy the TRE into its location in the TRE ring */
|
|
spin_lock_irqsave(&lldev->lock, flags);
|
|
tre->tre_index = lldev->tre_write_offset / HIDMA_TRE_SIZE;
|
|
lldev->pending_tre_list[tre->tre_index] = tre;
|
|
memcpy(lldev->tre_ring + lldev->tre_write_offset,
|
|
&tre->tre_local[0], HIDMA_TRE_SIZE);
|
|
tre->err_code = 0;
|
|
tre->err_info = 0;
|
|
tre->queued = 1;
|
|
atomic_inc(&lldev->pending_tre_count);
|
|
lldev->tre_write_offset = (lldev->tre_write_offset + HIDMA_TRE_SIZE)
|
|
% lldev->tre_ring_size;
|
|
spin_unlock_irqrestore(&lldev->lock, flags);
|
|
}
|
|
|
|
/*
|
|
* Note that even though we stop this channel if there is a pending transaction
|
|
* in flight it will complete and follow the callback. This request will
|
|
* prevent further requests to be made.
|
|
*/
|
|
int hidma_ll_disable(struct hidma_lldev *lldev)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
|
|
/* The channel needs to be in working state */
|
|
if (!hidma_ll_isenabled(lldev))
|
|
return 0;
|
|
|
|
val = readl(lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
|
|
val &= ~(HIDMA_CH_CONTROL_MASK << 16);
|
|
val |= HIDMA_CH_SUSPEND << 16;
|
|
writel(val, lldev->trca + HIDMA_TRCA_CTRLSTS_REG);
|
|
|
|
/*
|
|
* Start the wait right after the suspend is confirmed.
|
|
* Do a polled read up to 1ms and 10ms maximum.
|
|
*/
|
|
ret = readl_poll_timeout(lldev->trca + HIDMA_TRCA_CTRLSTS_REG, val,
|
|
HIDMA_CH_STATE(val) == HIDMA_CH_SUSPENDED,
|
|
1000, 10000);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val = readl(lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
|
|
val &= ~(HIDMA_CH_CONTROL_MASK << 16);
|
|
val |= HIDMA_CH_SUSPEND << 16;
|
|
writel(val, lldev->evca + HIDMA_EVCA_CTRLSTS_REG);
|
|
|
|
/*
|
|
* Start the wait right after the suspend is confirmed
|
|
* Delay up to 10ms after reset to allow DMA logic to quiesce.
|
|
*/
|
|
ret = readl_poll_timeout(lldev->evca + HIDMA_EVCA_CTRLSTS_REG, val,
|
|
HIDMA_CH_STATE(val) == HIDMA_CH_SUSPENDED,
|
|
1000, 10000);
|
|
if (ret)
|
|
return ret;
|
|
|
|
lldev->trch_state = HIDMA_CH_SUSPENDED;
|
|
lldev->evch_state = HIDMA_CH_SUSPENDED;
|
|
|
|
/* disable interrupts */
|
|
writel(0, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
|
|
return 0;
|
|
}
|
|
|
|
void hidma_ll_set_transfer_params(struct hidma_lldev *lldev, u32 tre_ch,
|
|
dma_addr_t src, dma_addr_t dest, u32 len,
|
|
u32 flags, u32 txntype)
|
|
{
|
|
struct hidma_tre *tre;
|
|
u32 *tre_local;
|
|
|
|
if (tre_ch >= lldev->nr_tres) {
|
|
dev_err(lldev->dev, "invalid TRE number in transfer params:%d",
|
|
tre_ch);
|
|
return;
|
|
}
|
|
|
|
tre = &lldev->trepool[tre_ch];
|
|
if (atomic_read(&tre->allocated) != true) {
|
|
dev_err(lldev->dev, "trying to set params on an unused TRE:%d",
|
|
tre_ch);
|
|
return;
|
|
}
|
|
|
|
tre_local = &tre->tre_local[0];
|
|
tre_local[HIDMA_TRE_CFG_IDX] &= ~GENMASK(7, 0);
|
|
tre_local[HIDMA_TRE_CFG_IDX] |= txntype;
|
|
tre_local[HIDMA_TRE_LEN_IDX] = len;
|
|
tre_local[HIDMA_TRE_SRC_LOW_IDX] = lower_32_bits(src);
|
|
tre_local[HIDMA_TRE_SRC_HI_IDX] = upper_32_bits(src);
|
|
tre_local[HIDMA_TRE_DEST_LOW_IDX] = lower_32_bits(dest);
|
|
tre_local[HIDMA_TRE_DEST_HI_IDX] = upper_32_bits(dest);
|
|
tre->int_flags = flags;
|
|
}
|
|
|
|
/*
|
|
* Called during initialization and after an error condition
|
|
* to restore hardware state.
|
|
*/
|
|
int hidma_ll_setup(struct hidma_lldev *lldev)
|
|
{
|
|
int rc;
|
|
u64 addr;
|
|
u32 val;
|
|
u32 nr_tres = lldev->nr_tres;
|
|
|
|
atomic_set(&lldev->pending_tre_count, 0);
|
|
lldev->tre_processed_off = 0;
|
|
lldev->evre_processed_off = 0;
|
|
lldev->tre_write_offset = 0;
|
|
|
|
/* disable interrupts */
|
|
writel(0, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
|
|
|
|
/* clear all pending interrupts */
|
|
val = readl(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
|
|
writel(val, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
|
|
|
|
rc = hidma_ll_reset(lldev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/*
|
|
* Clear all pending interrupts again.
|
|
* Otherwise, we observe reset complete interrupts.
|
|
*/
|
|
val = readl(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
|
|
writel(val, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
|
|
|
|
/* disable interrupts again after reset */
|
|
writel(0, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
|
|
|
|
addr = lldev->tre_dma;
|
|
writel(lower_32_bits(addr), lldev->trca + HIDMA_TRCA_RING_LOW_REG);
|
|
writel(upper_32_bits(addr), lldev->trca + HIDMA_TRCA_RING_HIGH_REG);
|
|
writel(lldev->tre_ring_size, lldev->trca + HIDMA_TRCA_RING_LEN_REG);
|
|
|
|
addr = lldev->evre_dma;
|
|
writel(lower_32_bits(addr), lldev->evca + HIDMA_EVCA_RING_LOW_REG);
|
|
writel(upper_32_bits(addr), lldev->evca + HIDMA_EVCA_RING_HIGH_REG);
|
|
writel(HIDMA_EVRE_SIZE * nr_tres,
|
|
lldev->evca + HIDMA_EVCA_RING_LEN_REG);
|
|
|
|
/* configure interrupts */
|
|
hidma_ll_setup_irq(lldev, lldev->msi_support);
|
|
|
|
rc = hidma_ll_enable(lldev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
return rc;
|
|
}
|
|
|
|
void hidma_ll_setup_irq(struct hidma_lldev *lldev, bool msi)
|
|
{
|
|
u32 val;
|
|
|
|
lldev->msi_support = msi;
|
|
|
|
/* disable interrupts again after reset */
|
|
writel(0, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
|
|
writel(0, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
|
|
|
|
/* support IRQ by default */
|
|
val = readl(lldev->evca + HIDMA_EVCA_INTCTRL_REG);
|
|
val &= ~0xF;
|
|
if (!lldev->msi_support)
|
|
val = val | 0x1;
|
|
writel(val, lldev->evca + HIDMA_EVCA_INTCTRL_REG);
|
|
|
|
/* clear all pending interrupts and enable them */
|
|
writel(ENABLE_IRQS, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
|
|
writel(ENABLE_IRQS, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
|
|
}
|
|
|
|
struct hidma_lldev *hidma_ll_init(struct device *dev, u32 nr_tres,
|
|
void __iomem *trca, void __iomem *evca,
|
|
u8 chidx)
|
|
{
|
|
u32 required_bytes;
|
|
struct hidma_lldev *lldev;
|
|
int rc;
|
|
size_t sz;
|
|
|
|
if (!trca || !evca || !dev || !nr_tres)
|
|
return NULL;
|
|
|
|
/* need at least four TREs */
|
|
if (nr_tres < 4)
|
|
return NULL;
|
|
|
|
/* need an extra space */
|
|
nr_tres += 1;
|
|
|
|
lldev = devm_kzalloc(dev, sizeof(struct hidma_lldev), GFP_KERNEL);
|
|
if (!lldev)
|
|
return NULL;
|
|
|
|
lldev->evca = evca;
|
|
lldev->trca = trca;
|
|
lldev->dev = dev;
|
|
sz = sizeof(struct hidma_tre);
|
|
lldev->trepool = devm_kcalloc(lldev->dev, nr_tres, sz, GFP_KERNEL);
|
|
if (!lldev->trepool)
|
|
return NULL;
|
|
|
|
required_bytes = sizeof(lldev->pending_tre_list[0]);
|
|
lldev->pending_tre_list = devm_kcalloc(dev, nr_tres, required_bytes,
|
|
GFP_KERNEL);
|
|
if (!lldev->pending_tre_list)
|
|
return NULL;
|
|
|
|
sz = (HIDMA_TRE_SIZE + 1) * nr_tres;
|
|
lldev->tre_ring = dmam_alloc_coherent(dev, sz, &lldev->tre_dma,
|
|
GFP_KERNEL);
|
|
if (!lldev->tre_ring)
|
|
return NULL;
|
|
|
|
memset(lldev->tre_ring, 0, (HIDMA_TRE_SIZE + 1) * nr_tres);
|
|
lldev->tre_ring_size = HIDMA_TRE_SIZE * nr_tres;
|
|
lldev->nr_tres = nr_tres;
|
|
|
|
/* the TRE ring has to be TRE_SIZE aligned */
|
|
if (!IS_ALIGNED(lldev->tre_dma, HIDMA_TRE_SIZE)) {
|
|
u8 tre_ring_shift;
|
|
|
|
tre_ring_shift = lldev->tre_dma % HIDMA_TRE_SIZE;
|
|
tre_ring_shift = HIDMA_TRE_SIZE - tre_ring_shift;
|
|
lldev->tre_dma += tre_ring_shift;
|
|
lldev->tre_ring += tre_ring_shift;
|
|
}
|
|
|
|
sz = (HIDMA_EVRE_SIZE + 1) * nr_tres;
|
|
lldev->evre_ring = dmam_alloc_coherent(dev, sz, &lldev->evre_dma,
|
|
GFP_KERNEL);
|
|
if (!lldev->evre_ring)
|
|
return NULL;
|
|
|
|
memset(lldev->evre_ring, 0, (HIDMA_EVRE_SIZE + 1) * nr_tres);
|
|
lldev->evre_ring_size = HIDMA_EVRE_SIZE * nr_tres;
|
|
|
|
/* the EVRE ring has to be EVRE_SIZE aligned */
|
|
if (!IS_ALIGNED(lldev->evre_dma, HIDMA_EVRE_SIZE)) {
|
|
u8 evre_ring_shift;
|
|
|
|
evre_ring_shift = lldev->evre_dma % HIDMA_EVRE_SIZE;
|
|
evre_ring_shift = HIDMA_EVRE_SIZE - evre_ring_shift;
|
|
lldev->evre_dma += evre_ring_shift;
|
|
lldev->evre_ring += evre_ring_shift;
|
|
}
|
|
lldev->nr_tres = nr_tres;
|
|
lldev->chidx = chidx;
|
|
|
|
sz = nr_tres * sizeof(struct hidma_tre *);
|
|
rc = kfifo_alloc(&lldev->handoff_fifo, sz, GFP_KERNEL);
|
|
if (rc)
|
|
return NULL;
|
|
|
|
rc = hidma_ll_setup(lldev);
|
|
if (rc)
|
|
return NULL;
|
|
|
|
spin_lock_init(&lldev->lock);
|
|
tasklet_init(&lldev->task, hidma_ll_tre_complete, (unsigned long)lldev);
|
|
lldev->initialized = 1;
|
|
writel(ENABLE_IRQS, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
|
|
return lldev;
|
|
}
|
|
|
|
int hidma_ll_uninit(struct hidma_lldev *lldev)
|
|
{
|
|
u32 required_bytes;
|
|
int rc = 0;
|
|
u32 val;
|
|
|
|
if (!lldev)
|
|
return -ENODEV;
|
|
|
|
if (!lldev->initialized)
|
|
return 0;
|
|
|
|
lldev->initialized = 0;
|
|
|
|
required_bytes = sizeof(struct hidma_tre) * lldev->nr_tres;
|
|
tasklet_kill(&lldev->task);
|
|
memset(lldev->trepool, 0, required_bytes);
|
|
lldev->trepool = NULL;
|
|
atomic_set(&lldev->pending_tre_count, 0);
|
|
lldev->tre_write_offset = 0;
|
|
|
|
rc = hidma_ll_reset(lldev);
|
|
|
|
/*
|
|
* Clear all pending interrupts again.
|
|
* Otherwise, we observe reset complete interrupts.
|
|
*/
|
|
val = readl(lldev->evca + HIDMA_EVCA_IRQ_STAT_REG);
|
|
writel(val, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
|
|
writel(0, lldev->evca + HIDMA_EVCA_IRQ_EN_REG);
|
|
return rc;
|
|
}
|
|
|
|
enum dma_status hidma_ll_status(struct hidma_lldev *lldev, u32 tre_ch)
|
|
{
|
|
enum dma_status ret = DMA_ERROR;
|
|
struct hidma_tre *tre;
|
|
unsigned long flags;
|
|
u8 err_code;
|
|
|
|
spin_lock_irqsave(&lldev->lock, flags);
|
|
|
|
tre = &lldev->trepool[tre_ch];
|
|
err_code = tre->err_code;
|
|
|
|
if (err_code & HIDMA_EVRE_STATUS_COMPLETE)
|
|
ret = DMA_COMPLETE;
|
|
else if (err_code & HIDMA_EVRE_STATUS_ERROR)
|
|
ret = DMA_ERROR;
|
|
else
|
|
ret = DMA_IN_PROGRESS;
|
|
spin_unlock_irqrestore(&lldev->lock, flags);
|
|
|
|
return ret;
|
|
}
|