mirror of
https://github.com/torvalds/linux.git
synced 2024-12-12 14:12:51 +00:00
f11121314a
The Rockchip RK809 PMIC is compatible with RK817 and provides the same
capabilities, except for the battery charger manager.
There are also minor regulator related differences: BOOST and OTG_SWITCH
are specific to RK817, while DCDC_REG5, SWITCH_REG1 and SWITCH_REG2 are
provided RK809.
The current binding for RK809 doesn't document the audio codec
properties, although it has been already in use by several boards:
rk3566-quartz64-b, k3566-roc-pc, rk3568-evb1-v10, rk3568-lubancat-2,
rk3568-odroid-m1, rk3568-rock-3a.
Therefore dtbs_check fails for all of them:
DTC_CHK arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dtb
rk3568-rock-3a.dtb: pmic@20: '#sound-dai-cells', 'assigned-clock-parents', 'assigned-clocks', 'clock-names', 'clocks', 'codec' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml#
Additionally, the example in rockchip,rk809 binding is not able to
actually test the schema since it uses a wrong compatible
'rockchip,rk808' instead of the expected 'rockchip,rk809'.
Instead of duplicating even more content, merge the RK809 support into
the more inclusive RK817 schema and drop the now obsolete rockchip,rk809
related file.
Fixes: 6c38ca0340 ("dt-bindings: mfd: rk808: Convert bindings to yaml")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240622-rk809-fixes-v2-2-c0db420d3639@collabora.com
Signed-off-by: Lee Jones <lee@kernel.org>
394 lines
11 KiB
YAML
394 lines
11 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/mfd/rockchip,rk817.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: RK809/RK817 Power Management Integrated Circuit
|
|
|
|
maintainers:
|
|
- Chris Zhong <zyw@rock-chips.com>
|
|
- Zhang Qing <zhangqing@rock-chips.com>
|
|
|
|
description: |
|
|
Rockchip RK809/RK817 series PMIC. This device consists of an i2c controlled
|
|
MFD that includes regulators, an RTC, a power button and an audio codec.
|
|
The RK817 variant also provides a battery charger manager.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- rockchip,rk809
|
|
- rockchip,rk817
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
'#clock-cells':
|
|
description:
|
|
See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
|
|
minimum: 0
|
|
maximum: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
clock-names:
|
|
items:
|
|
- const: mclk
|
|
|
|
clock-output-names:
|
|
description:
|
|
From common clock binding to override the default output clock name.
|
|
|
|
rockchip,system-power-controller:
|
|
type: boolean
|
|
deprecated: true
|
|
description:
|
|
Telling whether or not this PMIC is controlling the system power.
|
|
|
|
'#sound-dai-cells':
|
|
const: 0
|
|
|
|
system-power-controller: true
|
|
|
|
wakeup-source:
|
|
type: boolean
|
|
description:
|
|
Device can be used as a wakeup source.
|
|
|
|
vcc1-supply:
|
|
description:
|
|
The input supply for DCDC_REG1.
|
|
|
|
vcc2-supply:
|
|
description:
|
|
The input supply for DCDC_REG2.
|
|
|
|
vcc3-supply:
|
|
description:
|
|
The input supply for DCDC_REG3.
|
|
|
|
vcc4-supply:
|
|
description:
|
|
The input supply for DCDC_REG4.
|
|
|
|
vcc5-supply:
|
|
description:
|
|
The input supply for LDO_REG1, LDO_REG2, and LDO_REG3.
|
|
|
|
vcc6-supply:
|
|
description:
|
|
The input supply for LDO_REG4, LDO_REG5, and LDO_REG6.
|
|
|
|
vcc7-supply:
|
|
description:
|
|
The input supply for LDO_REG7, LDO_REG8, and LDO_REG9.
|
|
|
|
vcc8-supply:
|
|
description:
|
|
The input supply for BOOST on RK817, or for SWITCH_REG2 on RK809.
|
|
|
|
vcc9-supply:
|
|
description:
|
|
The input supply for OTG_SWITCH on RK817,
|
|
or for DCDC_REG5 and SWITCH_REG1 on RK809.
|
|
|
|
regulators:
|
|
type: object
|
|
patternProperties:
|
|
"^(LDO_REG[1-9]|DCDC_REG[1-5]|BOOST|OTG_SWITCH|SWITCH_REG[1-2])$":
|
|
$ref: /schemas/regulator/regulator.yaml
|
|
unevaluatedProperties: false
|
|
additionalProperties: false
|
|
|
|
codec:
|
|
type: object
|
|
additionalProperties: false
|
|
properties:
|
|
rockchip,mic-in-differential:
|
|
type: boolean
|
|
description:
|
|
Describes if the microphone uses differential mode.
|
|
|
|
charger:
|
|
type: object
|
|
$ref: /schemas/power/supply/power-supply.yaml
|
|
|
|
properties:
|
|
monitored-battery:
|
|
description: |
|
|
A phandle to a monitored battery node that contains a valid
|
|
value for:
|
|
charge-full-design-microamp-hours,
|
|
charge-term-current-microamp,
|
|
constant-charge-current-max-microamp,
|
|
constant-charge-voltage-max-microvolt,
|
|
voltage-max-design-microvolt,
|
|
voltage-min-design-microvolt,
|
|
and a valid ocv-capacity table.
|
|
|
|
rockchip,resistor-sense-micro-ohms:
|
|
description: |
|
|
Value in microohms of the battery sense resistor. This value is
|
|
used by the driver to set the correct divisor value to translate
|
|
ADC readings into the proper units of measure.
|
|
enum: [10000, 20000]
|
|
|
|
rockchip,sleep-enter-current-microamp:
|
|
description: |
|
|
Value in microamps of the sleep enter current for the charger.
|
|
Value is used by the driver to calibrate the relax threshold.
|
|
|
|
rockchip,sleep-filter-current-microamp:
|
|
description:
|
|
Value in microamps of the sleep filter current for the charger.
|
|
Value is used by the driver to derive the sleep sample current.
|
|
|
|
required:
|
|
- monitored-battery
|
|
- rockchip,resistor-sense-micro-ohms
|
|
- rockchip,sleep-enter-current-microamp
|
|
- rockchip,sleep-filter-current-microamp
|
|
|
|
additionalProperties: false
|
|
|
|
allOf:
|
|
- $ref: /schemas/sound/dai-common.yaml#
|
|
- if:
|
|
properties:
|
|
'#clock-cells':
|
|
const: 0
|
|
|
|
then:
|
|
properties:
|
|
clock-output-names:
|
|
maxItems: 1
|
|
|
|
else:
|
|
properties:
|
|
clock-output-names:
|
|
maxItems: 2
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: rockchip,rk817
|
|
then:
|
|
properties:
|
|
regulators:
|
|
patternProperties:
|
|
"^(DCDC_REG5|SWITCH_REG[1-2])$": false
|
|
else:
|
|
properties:
|
|
regulators:
|
|
patternProperties:
|
|
"^(BOOST|OTG_SWITCH)$": false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- "#clock-cells"
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/px30-cru.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
rk817: pmic@20 {
|
|
compatible = "rockchip,rk817";
|
|
reg = <0x20>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
|
|
clock-output-names = "rk808-clkout1", "xin32k";
|
|
clock-names = "mclk";
|
|
clocks = <&cru SCLK_I2S1_OUT>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
|
|
wakeup-source;
|
|
#clock-cells = <1>;
|
|
#sound-dai-cells = <0>;
|
|
|
|
vcc1-supply = <&vccsys>;
|
|
vcc2-supply = <&vccsys>;
|
|
vcc3-supply = <&vccsys>;
|
|
vcc4-supply = <&vccsys>;
|
|
vcc5-supply = <&vccsys>;
|
|
vcc6-supply = <&vccsys>;
|
|
vcc7-supply = <&vccsys>;
|
|
|
|
regulators {
|
|
vdd_logic: DCDC_REG1 {
|
|
regulator-name = "vdd_logic";
|
|
regulator-min-microvolt = <950000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <950000>;
|
|
};
|
|
};
|
|
|
|
vdd_arm: DCDC_REG2 {
|
|
regulator-name = "vdd_arm";
|
|
regulator-min-microvolt = <950000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <950000>;
|
|
};
|
|
};
|
|
|
|
vcc_ddr: DCDC_REG3 {
|
|
regulator-name = "vcc_ddr";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_3v3: DCDC_REG4 {
|
|
regulator-name = "vcc_3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vcc_1v8: LDO_REG2 {
|
|
regulator-name = "vcc_1v8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vdd_1v0: LDO_REG3 {
|
|
regulator-name = "vdd_1v0";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1000000>;
|
|
};
|
|
};
|
|
|
|
vcc3v3_pmu: LDO_REG4 {
|
|
regulator-name = "vcc3v3_pmu";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vccio_sd: LDO_REG5 {
|
|
regulator-name = "vccio_sd";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vcc_sd: LDO_REG6 {
|
|
regulator-name = "vcc_sd";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vcc_bl: LDO_REG7 {
|
|
regulator-name = "vcc_bl";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vcc_lcd: LDO_REG8 {
|
|
regulator-name = "vcc_lcd";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <2800000>;
|
|
};
|
|
};
|
|
|
|
vcc_cam: LDO_REG9 {
|
|
regulator-name = "vcc_cam";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <3000000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
rk817_charger: charger {
|
|
monitored-battery = <&battery>;
|
|
rockchip,resistor-sense-micro-ohms = <10000>;
|
|
rockchip,sleep-enter-current-microamp = <300000>;
|
|
rockchip,sleep-filter-current-microamp = <100000>;
|
|
};
|
|
|
|
rk817_codec: codec {
|
|
rockchip,mic-in-differential;
|
|
};
|
|
};
|
|
};
|