linux/drivers/spi/spi-bcm2835.c

/*
 * Driver for Broadcom BCM2835 SPI Controllers
 *
 * Copyright (C) 2012 Chris Boot
 * Copyright (C) 2013 Stephen Warren
 *
 * This driver is inspired by:
 * spi-ath79.c, Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
 * spi-atmel.c, Copyright (C) 2006 Atmel Corporation
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 */

#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_device.h>
#include <linux/spi/spi.h>

/* SPI register offsets */
#define BCM2835_SPI_CS			0x00
#define BCM2835_SPI_FIFO		0x04
#define BCM2835_SPI_CLK			0x08
#define BCM2835_SPI_DLEN		0x0c
#define BCM2835_SPI_LTOH		0x10
#define BCM2835_SPI_DC			0x14

/* Bitfields in CS */
#define BCM2835_SPI_CS_LEN_LONG		0x02000000
#define BCM2835_SPI_CS_DMA_LEN		0x01000000
#define BCM2835_SPI_CS_CSPOL2		0x00800000
#define BCM2835_SPI_CS_CSPOL1		0x00400000
#define BCM2835_SPI_CS_CSPOL0		0x00200000
#define BCM2835_SPI_CS_RXF		0x00100000
#define BCM2835_SPI_CS_RXR		0x00080000
#define BCM2835_SPI_CS_TXD		0x00040000
#define BCM2835_SPI_CS_RXD		0x00020000
#define BCM2835_SPI_CS_DONE		0x00010000
#define BCM2835_SPI_CS_LEN		0x00002000
#define BCM2835_SPI_CS_REN		0x00001000
#define BCM2835_SPI_CS_ADCS		0x00000800
#define BCM2835_SPI_CS_INTR		0x00000400
#define BCM2835_SPI_CS_INTD		0x00000200
#define BCM2835_SPI_CS_DMAEN		0x00000100
#define BCM2835_SPI_CS_TA		0x00000080
#define BCM2835_SPI_CS_CSPOL		0x00000040
#define BCM2835_SPI_CS_CLEAR_RX		0x00000020
#define BCM2835_SPI_CS_CLEAR_TX		0x00000010
#define BCM2835_SPI_CS_CPOL		0x00000008
#define BCM2835_SPI_CS_CPHA		0x00000004
#define BCM2835_SPI_CS_CS_10		0x00000002
#define BCM2835_SPI_CS_CS_01		0x00000001

#define BCM2835_SPI_TIMEOUT_MS	30000
#define BCM2835_SPI_MODE_BITS	(SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_NO_CS)

#define DRV_NAME	"spi-bcm2835"

struct bcm2835_spi {
	void __iomem *regs;
	struct clk *clk;
	int irq;
	struct completion done;
	const u8 *tx_buf;
	u8 *rx_buf;
	int len;
};

static inline u32 bcm2835_rd(struct bcm2835_spi *bs, unsigned reg)
{
	return readl(bs->regs + reg);
}

static inline void bcm2835_wr(struct bcm2835_spi *bs, unsigned reg, u32 val)
{
	writel(val, bs->regs + reg);
}

static inline void bcm2835_rd_fifo(struct bcm2835_spi *bs, int len)
{
	u8 byte;

	while (len--) {
		byte = bcm2835_rd(bs, BCM2835_SPI_FIFO);
		if (bs->rx_buf)
			*bs->rx_buf++ = byte;
	}
}

static inline void bcm2835_wr_fifo(struct bcm2835_spi *bs, int len)
{
	u8 byte;

	if (len > bs->len)
		len = bs->len;

	while (len--) {
		byte = bs->tx_buf ? *bs->tx_buf++ : 0;
		bcm2835_wr(bs, BCM2835_SPI_FIFO, byte);
		bs->len--;
	}
}

static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id)
{
	struct spi_master *master = dev_id;
	struct bcm2835_spi *bs = spi_master_get_devdata(master);
	u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);

	/*
	 * RXR - RX needs Reading. This means 12 (or more) bytes have been
	 * transmitted and hence 12 (or more) bytes have been received.
	 *
	 * The FIFO is 16-bytes deep. We check for this interrupt to keep the
	 * FIFO full; we have a 4-byte-time buffer for IRQ latency. We check
	 * this before DONE (TX empty) just in case we delayed processing this
	 * interrupt for some reason.
	 *
	 * We only check for this case if we have more bytes to TX; at the end
	 * of the transfer, we ignore this pipelining optimization, and let
	 * bcm2835_spi_finish_transfer() drain the RX FIFO.
	 */
	if (bs->len && (cs & BCM2835_SPI_CS_RXR)) {
		/* Read 12 bytes of data */
		bcm2835_rd_fifo(bs, 12);

		/* Write up to 12 bytes */
		bcm2835_wr_fifo(bs, 12);

		/*
		 * We must have written something to the TX FIFO due to the
		 * bs->len check above, so cannot be DONE. Hence, return
		 * early. Note that DONE could also be set if we serviced an
		 * RXR interrupt really late.
		 */
		return IRQ_HANDLED;
	}

	/*
	 * DONE - TX empty. This occurs when we first enable the transfer
	 * since we do not pre-fill the TX FIFO. At any other time, given that
	 * we refill the TX FIFO above based on RXR, and hence ignore DONE if
	 * RXR is set, DONE really does mean end-of-transfer.
	 */
	if (cs & BCM2835_SPI_CS_DONE) {
		if (bs->len) { /* First interrupt in a transfer */
			bcm2835_wr_fifo(bs, 16);
		} else { /* Transfer complete */
			/* Disable SPI interrupts */
			cs &= ~(BCM2835_SPI_CS_INTR | BCM2835_SPI_CS_INTD);
			bcm2835_wr(bs, BCM2835_SPI_CS, cs);

			/*
			 * Wake up bcm2835_spi_transfer_one(), which will call
			 * bcm2835_spi_finish_transfer(), to drain the RX FIFO.
			 */
			complete(&bs->done);
		}

		return IRQ_HANDLED;
	}

	return IRQ_NONE;
}

static int bcm2835_spi_start_transfer(struct spi_device *spi,
		struct spi_transfer *tfr)
{
	struct bcm2835_spi *bs = spi_master_get_devdata(spi->master);
	unsigned long spi_hz, clk_hz, cdiv;
	u32 cs = BCM2835_SPI_CS_INTR | BCM2835_SPI_CS_INTD | BCM2835_SPI_CS_TA;

	spi_hz = tfr->speed_hz;
	clk_hz = clk_get_rate(bs->clk);

	if (spi_hz >= clk_hz / 2) {
		cdiv = 2; /* clk_hz/2 is the fastest we can go */
	} else if (spi_hz) {
		/* CDIV must be a power of two */
		cdiv = roundup_pow_of_two(DIV_ROUND_UP(clk_hz, spi_hz));

		if (cdiv >= 65536)
			cdiv = 0; /* 0 is the slowest we can go */
	} else
		cdiv = 0; /* 0 is the slowest we can go */

	if (spi->mode & SPI_CPOL)
		cs |= BCM2835_SPI_CS_CPOL;
	if (spi->mode & SPI_CPHA)
		cs |= BCM2835_SPI_CS_CPHA;

	if (!(spi->mode & SPI_NO_CS)) {
		if (spi->mode & SPI_CS_HIGH) {
			cs |= BCM2835_SPI_CS_CSPOL;
			cs |= BCM2835_SPI_CS_CSPOL0 << spi->chip_select;
		}

		cs |= spi->chip_select;
	}

	reinit_completion(&bs->done);
	bs->tx_buf = tfr->tx_buf;
	bs->rx_buf = tfr->rx_buf;
	bs->len = tfr->len;

	bcm2835_wr(bs, BCM2835_SPI_CLK, cdiv);
	/*
	 * Enable the HW block. This will immediately trigger a DONE (TX
	 * empty) interrupt, upon which we will fill the TX FIFO with the
	 * first TX bytes. Pre-filling the TX FIFO here to avoid the
	 * interrupt doesn't work:-(
	 */
	bcm2835_wr(bs, BCM2835_SPI_CS, cs);

	return 0;
}

static int bcm2835_spi_finish_transfer(struct spi_device *spi,
		struct spi_transfer *tfr, bool cs_change)
{
	struct bcm2835_spi *bs = spi_master_get_devdata(spi->master);
	u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS);

	/* Drain RX FIFO */
	while (cs & BCM2835_SPI_CS_RXD) {
		bcm2835_rd_fifo(bs, 1);
		cs = bcm2835_rd(bs, BCM2835_SPI_CS);
	}

	if (tfr->delay_usecs)
		udelay(tfr->delay_usecs);

	if (cs_change)
		/* Clear TA flag */
		bcm2835_wr(bs, BCM2835_SPI_CS, cs & ~BCM2835_SPI_CS_TA);

	return 0;
}

static int bcm2835_spi_transfer_one(struct spi_master *master,
		struct spi_message *mesg)
{
	struct bcm2835_spi *bs = spi_master_get_devdata(master);
	struct spi_transfer *tfr;
	struct spi_device *spi = mesg->spi;
	int err = 0;
	unsigned int timeout;
	bool cs_change;

	list_for_each_entry(tfr, &mesg->transfers, transfer_list) {
		err = bcm2835_spi_start_transfer(spi, tfr);
		if (err)
			goto out;

		timeout = wait_for_completion_timeout(&bs->done,
				msecs_to_jiffies(BCM2835_SPI_TIMEOUT_MS));
		if (!timeout) {
			err = -ETIMEDOUT;
			goto out;
		}

		cs_change = tfr->cs_change ||
			list_is_last(&tfr->transfer_list, &mesg->transfers);

		err = bcm2835_spi_finish_transfer(spi, tfr, cs_change);
		if (err)
			goto out;

		mesg->actual_length += (tfr->len - bs->len);
	}

out:
	/* Clear FIFOs, and disable the HW block */
	bcm2835_wr(bs, BCM2835_SPI_CS,
		   BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);
	mesg->status = err;
	spi_finalize_current_message(master);

	return 0;
}

static int bcm2835_spi_probe(struct platform_device *pdev)
{
	struct spi_master *master;
	struct bcm2835_spi *bs;
	struct resource *res;
	int err;

	master = spi_alloc_master(&pdev->dev, sizeof(*bs));
	if (!master) {
		dev_err(&pdev->dev, "spi_alloc_master() failed\n");
		return -ENOMEM;
	}

	platform_set_drvdata(pdev, master);

	master->mode_bits = BCM2835_SPI_MODE_BITS;
	master->bits_per_word_mask = SPI_BPW_MASK(8);
	master->bus_num = -1;
	master->num_chipselect = 3;
	master->transfer_one_message = bcm2835_spi_transfer_one;
	master->dev.of_node = pdev->dev.of_node;

	bs = spi_master_get_devdata(master);

	init_completion(&bs->done);

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	bs->regs = devm_ioremap_resource(&pdev->dev, res);
	if (IS_ERR(bs->regs)) {
		err = PTR_ERR(bs->regs);
		goto out_master_put;
	}

	bs->clk = devm_clk_get(&pdev->dev, NULL);
	if (IS_ERR(bs->clk)) {
		err = PTR_ERR(bs->clk);
		dev_err(&pdev->dev, "could not get clk: %d\n", err);
		goto out_master_put;
	}

	bs->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
	if (bs->irq <= 0) {
		dev_err(&pdev->dev, "could not get IRQ: %d\n", bs->irq);
		err = bs->irq ? bs->irq : -ENODEV;
		goto out_master_put;
	}

	clk_prepare_enable(bs->clk);

	err = request_irq(bs->irq, bcm2835_spi_interrupt, 0,
			dev_name(&pdev->dev), master);
	if (err) {
		dev_err(&pdev->dev, "could not request IRQ: %d\n", err);
		goto out_clk_disable;
	}

	/* initialise the hardware */
	bcm2835_wr(bs, BCM2835_SPI_CS,
		   BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);

	err = devm_spi_register_master(&pdev->dev, master);
	if (err) {
		dev_err(&pdev->dev, "could not register SPI master: %d\n", err);
		goto out_free_irq;
	}

	return 0;

out_free_irq:
	free_irq(bs->irq, master);
out_clk_disable:
	clk_disable_unprepare(bs->clk);
out_master_put:
	spi_master_put(master);
	return err;
}

static int bcm2835_spi_remove(struct platform_device *pdev)
{
	struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
	struct bcm2835_spi *bs = spi_master_get_devdata(master);

	free_irq(bs->irq, master);

	/* Clear FIFOs, and disable the HW block */
	bcm2835_wr(bs, BCM2835_SPI_CS,
		   BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX);

	clk_disable_unprepare(bs->clk);

	return 0;
}

static const struct of_device_id bcm2835_spi_match[] = {
	{ .compatible = "brcm,bcm2835-spi", },
	{}
};
MODULE_DEVICE_TABLE(of, bcm2835_spi_match);

static struct platform_driver bcm2835_spi_driver = {
	.driver		= {
		.name		= DRV_NAME,
		.owner		= THIS_MODULE,
		.of_match_table	= bcm2835_spi_match,
	},
	.probe		= bcm2835_spi_probe,
	.remove		= bcm2835_spi_remove,
};
module_platform_driver(bcm2835_spi_driver);

MODULE_DESCRIPTION("SPI controller driver for Broadcom BCM2835");
MODULE_AUTHOR("Chris Boot <bootc@bootc.net>");
MODULE_LICENSE("GPL v2");