mirror of
https://github.com/torvalds/linux.git
synced 2024-12-06 11:01:43 +00:00
09a7bab68b
In case backend is not ready, ie: fail to wakeup or initialization, on the returning of the I2C_SLAVE_WRITE_REQUESTED event, bus driver should aware the backend status and might auto sending NACK on the next incoming bytes for I2C master to retry. Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Links:https://lore.kernel.org/linux-arm-kernel/556fa9e1-c54b-8370-4de7-c2d3ec7d6906@os.amperecomputing.com/ [wsa: made some wording more precise] Signed-off-by: Wolfram Sang <wsa@kernel.org>
202 lines
8.0 KiB
ReStructuredText
202 lines
8.0 KiB
ReStructuredText
=====================================
|
|
Linux I2C slave interface description
|
|
=====================================
|
|
|
|
by Wolfram Sang <wsa@sang-engineering.com> in 2014-15
|
|
|
|
Linux can also be an I2C slave if the I2C controller in use has slave
|
|
functionality. For that to work, one needs slave support in the bus driver plus
|
|
a hardware independent software backend providing the actual functionality. An
|
|
example for the latter is the slave-eeprom driver, which acts as a dual memory
|
|
driver. While another I2C master on the bus can access it like a regular
|
|
EEPROM, the Linux I2C slave can access the content via sysfs and handle data as
|
|
needed. The backend driver and the I2C bus driver communicate via events. Here
|
|
is a small graph visualizing the data flow and the means by which data is
|
|
transported. The dotted line marks only one example. The backend could also
|
|
use a character device, be in-kernel only, or something completely different::
|
|
|
|
|
|
e.g. sysfs I2C slave events I/O registers
|
|
+-----------+ v +---------+ v +--------+ v +------------+
|
|
| Userspace +........+ Backend +-----------+ Driver +-----+ Controller |
|
|
+-----------+ +---------+ +--------+ +------------+
|
|
| |
|
|
----------------------------------------------------------------+-- I2C
|
|
--------------------------------------------------------------+---- Bus
|
|
|
|
Note: Technically, there is also the I2C core between the backend and the
|
|
driver. However, at this time of writing, the layer is transparent.
|
|
|
|
|
|
User manual
|
|
===========
|
|
|
|
I2C slave backends behave like standard I2C clients. So, you can instantiate
|
|
them as described in the document instantiating-devices.rst. The only
|
|
difference is that i2c slave backends have their own address space. So, you
|
|
have to add 0x1000 to the address you would originally request. An example for
|
|
instantiating the slave-eeprom driver from userspace at the 7 bit address 0x64
|
|
on bus 1::
|
|
|
|
# echo slave-24c02 0x1064 > /sys/bus/i2c/devices/i2c-1/new_device
|
|
|
|
Each backend should come with separate documentation to describe its specific
|
|
behaviour and setup.
|
|
|
|
|
|
Developer manual
|
|
================
|
|
|
|
First, the events which are used by the bus driver and the backend will be
|
|
described in detail. After that, some implementation hints for extending bus
|
|
drivers and writing backends will be given.
|
|
|
|
|
|
I2C slave events
|
|
----------------
|
|
|
|
The bus driver sends an event to the backend using the following function::
|
|
|
|
ret = i2c_slave_event(client, event, &val)
|
|
|
|
'client' describes the I2C slave device. 'event' is one of the special event
|
|
types described hereafter. 'val' holds an u8 value for the data byte to be
|
|
read/written and is thus bidirectional. The pointer to val must always be
|
|
provided even if val is not used for an event, i.e. don't use NULL here. 'ret'
|
|
is the return value from the backend. Mandatory events must be provided by the
|
|
bus drivers and must be checked for by backend drivers.
|
|
|
|
Event types:
|
|
|
|
* I2C_SLAVE_WRITE_REQUESTED (mandatory)
|
|
|
|
'val': unused
|
|
|
|
'ret': 0 if the backend is ready, otherwise some errno
|
|
|
|
Another I2C master wants to write data to us. This event should be sent once
|
|
our own address and the write bit was detected. The data did not arrive yet, so
|
|
there is nothing to process or return. After returning, the bus driver must
|
|
always ack the address phase. If 'ret' is zero, backend initialization or
|
|
wakeup is done and further data may be received. If 'ret' is an errno, the bus
|
|
driver should nack all incoming bytes until the next stop condition to enforce
|
|
a retry of the transmission.
|
|
|
|
* I2C_SLAVE_READ_REQUESTED (mandatory)
|
|
|
|
'val': backend returns first byte to be sent
|
|
|
|
'ret': always 0
|
|
|
|
Another I2C master wants to read data from us. This event should be sent once
|
|
our own address and the read bit was detected. After returning, the bus driver
|
|
should transmit the first byte.
|
|
|
|
* I2C_SLAVE_WRITE_RECEIVED (mandatory)
|
|
|
|
'val': bus driver delivers received byte
|
|
|
|
'ret': 0 if the byte should be acked, some errno if the byte should be nacked
|
|
|
|
Another I2C master has sent a byte to us which needs to be set in 'val'. If 'ret'
|
|
is zero, the bus driver should ack this byte. If 'ret' is an errno, then the byte
|
|
should be nacked.
|
|
|
|
* I2C_SLAVE_READ_PROCESSED (mandatory)
|
|
|
|
'val': backend returns next byte to be sent
|
|
|
|
'ret': always 0
|
|
|
|
The bus driver requests the next byte to be sent to another I2C master in
|
|
'val'. Important: This does not mean that the previous byte has been acked, it
|
|
only means that the previous byte is shifted out to the bus! To ensure seamless
|
|
transmission, most hardware requests the next byte when the previous one is
|
|
still shifted out. If the master sends NACK and stops reading after the byte
|
|
currently shifted out, this byte requested here is never used. It very likely
|
|
needs to be sent again on the next I2C_SLAVE_READ_REQUEST, depending a bit on
|
|
your backend, though.
|
|
|
|
* I2C_SLAVE_STOP (mandatory)
|
|
|
|
'val': unused
|
|
|
|
'ret': always 0
|
|
|
|
A stop condition was received. This can happen anytime and the backend should
|
|
reset its state machine for I2C transfers to be able to receive new requests.
|
|
|
|
|
|
Software backends
|
|
-----------------
|
|
|
|
If you want to write a software backend:
|
|
|
|
* use a standard i2c_driver and its matching mechanisms
|
|
* write the slave_callback which handles the above slave events
|
|
(best using a state machine)
|
|
* register this callback via i2c_slave_register()
|
|
|
|
Check the i2c-slave-eeprom driver as an example.
|
|
|
|
|
|
Bus driver support
|
|
------------------
|
|
|
|
If you want to add slave support to the bus driver:
|
|
|
|
* implement calls to register/unregister the slave and add those to the
|
|
struct i2c_algorithm. When registering, you probably need to set the I2C
|
|
slave address and enable slave specific interrupts. If you use runtime pm, you
|
|
should use pm_runtime_get_sync() because your device usually needs to be
|
|
powered on always to be able to detect its slave address. When unregistering,
|
|
do the inverse of the above.
|
|
|
|
* Catch the slave interrupts and send appropriate i2c_slave_events to the backend.
|
|
|
|
Note that most hardware supports being master _and_ slave on the same bus. So,
|
|
if you extend a bus driver, please make sure that the driver supports that as
|
|
well. In almost all cases, slave support does not need to disable the master
|
|
functionality.
|
|
|
|
Check the i2c-rcar driver as an example.
|
|
|
|
|
|
About ACK/NACK
|
|
--------------
|
|
|
|
It is good behaviour to always ACK the address phase, so the master knows if a
|
|
device is basically present or if it mysteriously disappeared. Using NACK to
|
|
state being busy is troublesome. SMBus demands to always ACK the address phase,
|
|
while the I2C specification is more loose on that. Most I2C controllers also
|
|
automatically ACK when detecting their slave addresses, so there is no option
|
|
to NACK them. For those reasons, this API does not support NACK in the address
|
|
phase.
|
|
|
|
Currently, there is no slave event to report if the master did ACK or NACK a
|
|
byte when it reads from us. We could make this an optional event if the need
|
|
arises. However, cases should be extremely rare because the master is expected
|
|
to send STOP after that and we have an event for that. Also, keep in mind not
|
|
all I2C controllers have the possibility to report that event.
|
|
|
|
|
|
About buffers
|
|
-------------
|
|
|
|
During development of this API, the question of using buffers instead of just
|
|
bytes came up. Such an extension might be possible, usefulness is unclear at
|
|
this time of writing. Some points to keep in mind when using buffers:
|
|
|
|
* Buffers should be opt-in and backend drivers will always have to support
|
|
byte-based transactions as the ultimate fallback anyhow because this is how
|
|
the majority of HW works.
|
|
|
|
* For backends simulating hardware registers, buffers are largely not helpful
|
|
because after each byte written an action should be immediately triggered.
|
|
For reads, the data kept in the buffer might get stale if the backend just
|
|
updated a register because of internal processing.
|
|
|
|
* A master can send STOP at any time. For partially transferred buffers, this
|
|
means additional code to handle this exception. Such code tends to be
|
|
error-prone.
|