mirror of
https://github.com/torvalds/linux.git
synced 2024-11-22 04:02:20 +00:00
566f1dd528
During remove & rescan cycle, PCI subsystem will recalculate and adjust the bridge window sizing that was initially done by "BIOS". The size calculation is based on the required alignment of the largest resource among the downstream resources as per pbus_size_mem() (unimportant or zero parameters marked with "..."): min_align = calculate_mem_align(aligns, max_order); size0 = calculate_memsize(size, ..., min_align); inside calculate_memsize(), for the largest alignment: min_align = align1 >> 1; ... return min_align; and then in calculate_memsize(): return ALIGN(max(size, ...), align); If the original bridge window sizing tried to conserve space, this will lead to massive increase of the required bridge window size when the downstream has a large disparity in BAR sizes. E.g., with 16MiB and 16GiB BARs this results in 24GiB bridge window size even if 16MiB BAR does not require gigabytes of space to fit. When doing remove & rescan for a bus that contains such a PCI device, a larger bridge window is suddenly required on rescan but when there is a bridge window upstream that is already assigned based on the original size, it cannot be enlarged to the new requirement. This causes the allocation of the bridge window to fail (0x600000000 > 0x400ffffff): pci 0000:02:01.0: PCI bridge to [bus 03] pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff] pci 0000:02:01.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref] pci 0000:01:00.0: PCI bridge to [bus 02-04] pci 0000:01:00.0: bridge window [mem 0x40400000-0x406fffff] pci 0000:01:00.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref] pci 0000:03:00.0: device released pci 0000:02:01.0: device released pcieport 0000:01:00.0: scanning [bus 02-04] behind bridge, pass 0 pci 0000:02:01.0: PCI bridge to [bus 03] pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff] pci 0000:02:01.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref] pci 0000:02:01.0: scanning [bus 03-03] behind bridge, pass 0 pci 0000:03:00.0: BAR 0 [mem 0x6400000000-0x6400ffffff 64bit pref] pci 0000:03:00.0: BAR 2 [mem 0x6000000000-0x63ffffffff 64bit pref] pci 0000:03:00.0: ROM [mem 0x40400000-0x405fffff pref] pci 0000:02:01.0: PCI bridge to [bus 03] pci 0000:02:01.0: scanning [bus 03-03] behind bridge, pass 1 pcieport 0000:01:00.0: scanning [bus 02-04] behind bridge, pass 1 pci 0000:02:01.0: bridge window [mem size 0x600000000 64bit pref]: can't assign; no space pci 0000:02:01.0: bridge window [mem size 0x600000000 64bit pref]: failed to assign pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff]: assigned pci 0000:03:00.0: BAR 2 [mem size 0x400000000 64bit pref]: can't assign; no space pci 0000:03:00.0: BAR 2 [mem size 0x400000000 64bit pref]: failed to assign pci 0000:03:00.0: BAR 0 [mem size 0x01000000 64bit pref]: can't assign; no space pci 0000:03:00.0: BAR 0 [mem size 0x01000000 64bit pref]: failed to assign pci 0000:03:00.0: ROM [mem 0x40400000-0x405fffff pref]: assigned pci 0000:02:01.0: PCI bridge to [bus 03] pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff] This is a major surprise for users who are suddenly left with a device that was working fine with the original bridge window sizing. Even if the already assigned bridge window could be enlarged by reallocation in some cases (something the current code does not attempt to do), it is not possible in general case and the large amount of wasted space at the tail of the bridge window may lead to other resource exhaustion problems on Root Complex level (think of multiple PCIe cards with VFs and BAR size disparity in a single system). PCI BARs only need natural alignment (PCIe r6.1, sec 7.5.1.2.1) and bridge memory windows need 1MiB (sec 7.5.1.3). The current bridge window tail alignment rule was introduced in the commit 5d0a8965aea9 ("[PATCH] 2.5.14: New PCI allocation code (alpha, arm, parisc) [2/2]") that only states: "pbus_size_mem: core stuff; tested with randomly generated sets of resources". It does not explain the motivation for the extra tail space allocated that is not truly needed by the downstream resources. As such, it is far from clear if it ever has been required by any HW. To prevent devices with BAR size disparity from becoming unusable after remove & rescan cycle, attempt to do a truly minimal allocation for memory resources if needed. First check if the normally calculated bridge window will not fit into an already assigned upstream resource. In such case, try with relaxed bridge window tail sizing rules instead where no extra tail space is requested beyond what the downstream resources require. Only enforce the alignment requirement of the bridge window itself (normally 1MiB). With this patch, the resources are successfully allocated: pci 0000:02:01.0: PCI bridge to [bus 03] pci 0000:02:01.0: scanning [bus 03-03] behind bridge, pass 1 pcieport 0000:01:00.0: scanning [bus 02-04] behind bridge, pass 1 pcieport 0000:01:00.0: Assigned bridge window [mem 0x6000000000-0x6400ffffff 64bit pref] to [bus 02-04] cannot fit 0x600000000 required for 0000:02:01.0 bridging to [bus 03] pci 0000:02:01.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref] to [bus 03] requires relaxed alignment rules pcieport 0000:01:00.0: Assigned bridge window [mem 0x40400000-0x406fffff] to [bus 02-04] free space at [mem 0x40400000-0x405fffff] pci 0000:02:01.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref]: assigned pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff]: assigned pci 0000:03:00.0: BAR 2 [mem 0x6000000000-0x63ffffffff 64bit pref]: assigned pci 0000:03:00.0: BAR 0 [mem 0x6400000000-0x6400ffffff 64bit pref]: assigned pci 0000:03:00.0: ROM [mem 0x40400000-0x405fffff pref]: assigned pci 0000:02:01.0: PCI bridge to [bus 03] pci 0000:02:01.0: bridge window [mem 0x40400000-0x405fffff] pci 0000:02:01.0: bridge window [mem 0x6000000000-0x6400ffffff 64bit pref] This patch draws inspiration from the initial investigations and work by Mika Westerberg. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216795 Link: https://lore.kernel.org/linux-pci/20190812144144.2646-1-mika.westerberg@linux.intel.com/ Fixes: 5d0a8965aea9 ("[PATCH] 2.5.14: New PCI allocation code (alpha, arm, parisc) [2/2]") Link: https://lore.kernel.org/r/20240507102523.57320-9-ilpo.jarvinen@linux.intel.com Tested-by: Lidong Wang <lidong.wang@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2423 lines
64 KiB
C
2423 lines
64 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Support routines for initializing a PCI subsystem
|
|
*
|
|
* Extruded from code written by
|
|
* Dave Rusling (david.rusling@reo.mts.dec.com)
|
|
* David Mosberger (davidm@cs.arizona.edu)
|
|
* David Miller (davem@redhat.com)
|
|
*
|
|
* Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
|
|
* PCI-PCI bridges cleanup, sorted resource allocation.
|
|
* Feb 2002, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
|
|
* Converted to allocation in 3 passes, which gives
|
|
* tighter packing. Prefetchable range support.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/cache.h>
|
|
#include <linux/limits.h>
|
|
#include <linux/sizes.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/acpi.h>
|
|
#include "pci.h"
|
|
|
|
unsigned int pci_flags;
|
|
EXPORT_SYMBOL_GPL(pci_flags);
|
|
|
|
struct pci_dev_resource {
|
|
struct list_head list;
|
|
struct resource *res;
|
|
struct pci_dev *dev;
|
|
resource_size_t start;
|
|
resource_size_t end;
|
|
resource_size_t add_size;
|
|
resource_size_t min_align;
|
|
unsigned long flags;
|
|
};
|
|
|
|
static void free_list(struct list_head *head)
|
|
{
|
|
struct pci_dev_resource *dev_res, *tmp;
|
|
|
|
list_for_each_entry_safe(dev_res, tmp, head, list) {
|
|
list_del(&dev_res->list);
|
|
kfree(dev_res);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* add_to_list() - Add a new resource tracker to the list
|
|
* @head: Head of the list
|
|
* @dev: Device to which the resource belongs
|
|
* @res: Resource to be tracked
|
|
* @add_size: Additional size to be optionally added to the resource
|
|
* @min_align: Minimum memory window alignment
|
|
*/
|
|
static int add_to_list(struct list_head *head, struct pci_dev *dev,
|
|
struct resource *res, resource_size_t add_size,
|
|
resource_size_t min_align)
|
|
{
|
|
struct pci_dev_resource *tmp;
|
|
|
|
tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
|
|
if (!tmp)
|
|
return -ENOMEM;
|
|
|
|
tmp->res = res;
|
|
tmp->dev = dev;
|
|
tmp->start = res->start;
|
|
tmp->end = res->end;
|
|
tmp->flags = res->flags;
|
|
tmp->add_size = add_size;
|
|
tmp->min_align = min_align;
|
|
|
|
list_add(&tmp->list, head);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void remove_from_list(struct list_head *head, struct resource *res)
|
|
{
|
|
struct pci_dev_resource *dev_res, *tmp;
|
|
|
|
list_for_each_entry_safe(dev_res, tmp, head, list) {
|
|
if (dev_res->res == res) {
|
|
list_del(&dev_res->list);
|
|
kfree(dev_res);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static struct pci_dev_resource *res_to_dev_res(struct list_head *head,
|
|
struct resource *res)
|
|
{
|
|
struct pci_dev_resource *dev_res;
|
|
|
|
list_for_each_entry(dev_res, head, list) {
|
|
if (dev_res->res == res)
|
|
return dev_res;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static resource_size_t get_res_add_size(struct list_head *head,
|
|
struct resource *res)
|
|
{
|
|
struct pci_dev_resource *dev_res;
|
|
|
|
dev_res = res_to_dev_res(head, res);
|
|
return dev_res ? dev_res->add_size : 0;
|
|
}
|
|
|
|
static resource_size_t get_res_add_align(struct list_head *head,
|
|
struct resource *res)
|
|
{
|
|
struct pci_dev_resource *dev_res;
|
|
|
|
dev_res = res_to_dev_res(head, res);
|
|
return dev_res ? dev_res->min_align : 0;
|
|
}
|
|
|
|
/* Sort resources by alignment */
|
|
static void pdev_sort_resources(struct pci_dev *dev, struct list_head *head)
|
|
{
|
|
struct resource *r;
|
|
int i;
|
|
|
|
pci_dev_for_each_resource(dev, r, i) {
|
|
struct pci_dev_resource *dev_res, *tmp;
|
|
resource_size_t r_align;
|
|
struct list_head *n;
|
|
|
|
if (r->flags & IORESOURCE_PCI_FIXED)
|
|
continue;
|
|
|
|
if (!(r->flags) || r->parent)
|
|
continue;
|
|
|
|
r_align = pci_resource_alignment(dev, r);
|
|
if (!r_align) {
|
|
pci_warn(dev, "BAR %d: %pR has bogus alignment\n",
|
|
i, r);
|
|
continue;
|
|
}
|
|
|
|
tmp = kzalloc(sizeof(*tmp), GFP_KERNEL);
|
|
if (!tmp)
|
|
panic("%s: kzalloc() failed!\n", __func__);
|
|
tmp->res = r;
|
|
tmp->dev = dev;
|
|
|
|
/* Fallback is smallest one or list is empty */
|
|
n = head;
|
|
list_for_each_entry(dev_res, head, list) {
|
|
resource_size_t align;
|
|
|
|
align = pci_resource_alignment(dev_res->dev,
|
|
dev_res->res);
|
|
|
|
if (r_align > align) {
|
|
n = &dev_res->list;
|
|
break;
|
|
}
|
|
}
|
|
/* Insert it just before n */
|
|
list_add_tail(&tmp->list, n);
|
|
}
|
|
}
|
|
|
|
static void __dev_sort_resources(struct pci_dev *dev, struct list_head *head)
|
|
{
|
|
u16 class = dev->class >> 8;
|
|
|
|
/* Don't touch classless devices or host bridges or IOAPICs */
|
|
if (class == PCI_CLASS_NOT_DEFINED || class == PCI_CLASS_BRIDGE_HOST)
|
|
return;
|
|
|
|
/* Don't touch IOAPIC devices already enabled by firmware */
|
|
if (class == PCI_CLASS_SYSTEM_PIC) {
|
|
u16 command;
|
|
pci_read_config_word(dev, PCI_COMMAND, &command);
|
|
if (command & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY))
|
|
return;
|
|
}
|
|
|
|
pdev_sort_resources(dev, head);
|
|
}
|
|
|
|
static inline void reset_resource(struct resource *res)
|
|
{
|
|
res->start = 0;
|
|
res->end = 0;
|
|
res->flags = 0;
|
|
}
|
|
|
|
/**
|
|
* reassign_resources_sorted() - Satisfy any additional resource requests
|
|
*
|
|
* @realloc_head: Head of the list tracking requests requiring
|
|
* additional resources
|
|
* @head: Head of the list tracking requests with allocated
|
|
* resources
|
|
*
|
|
* Walk through each element of the realloc_head and try to procure additional
|
|
* resources for the element, provided the element is in the head list.
|
|
*/
|
|
static void reassign_resources_sorted(struct list_head *realloc_head,
|
|
struct list_head *head)
|
|
{
|
|
struct resource *res;
|
|
const char *res_name;
|
|
struct pci_dev_resource *add_res, *tmp;
|
|
struct pci_dev_resource *dev_res;
|
|
resource_size_t add_size, align;
|
|
int idx;
|
|
|
|
list_for_each_entry_safe(add_res, tmp, realloc_head, list) {
|
|
bool found_match = false;
|
|
|
|
res = add_res->res;
|
|
|
|
/* Skip resource that has been reset */
|
|
if (!res->flags)
|
|
goto out;
|
|
|
|
/* Skip this resource if not found in head list */
|
|
list_for_each_entry(dev_res, head, list) {
|
|
if (dev_res->res == res) {
|
|
found_match = true;
|
|
break;
|
|
}
|
|
}
|
|
if (!found_match) /* Just skip */
|
|
continue;
|
|
|
|
idx = res - &add_res->dev->resource[0];
|
|
res_name = pci_resource_name(add_res->dev, idx);
|
|
add_size = add_res->add_size;
|
|
align = add_res->min_align;
|
|
if (!resource_size(res)) {
|
|
res->start = align;
|
|
res->end = res->start + add_size - 1;
|
|
if (pci_assign_resource(add_res->dev, idx))
|
|
reset_resource(res);
|
|
} else {
|
|
res->flags |= add_res->flags &
|
|
(IORESOURCE_STARTALIGN|IORESOURCE_SIZEALIGN);
|
|
if (pci_reassign_resource(add_res->dev, idx,
|
|
add_size, align))
|
|
pci_info(add_res->dev, "%s %pR: failed to add %llx\n",
|
|
res_name, res,
|
|
(unsigned long long) add_size);
|
|
}
|
|
out:
|
|
list_del(&add_res->list);
|
|
kfree(add_res);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* assign_requested_resources_sorted() - Satisfy resource requests
|
|
*
|
|
* @head: Head of the list tracking requests for resources
|
|
* @fail_head: Head of the list tracking requests that could not be
|
|
* allocated
|
|
*
|
|
* Satisfy resource requests of each element in the list. Add requests that
|
|
* could not be satisfied to the failed_list.
|
|
*/
|
|
static void assign_requested_resources_sorted(struct list_head *head,
|
|
struct list_head *fail_head)
|
|
{
|
|
struct resource *res;
|
|
struct pci_dev_resource *dev_res;
|
|
int idx;
|
|
|
|
list_for_each_entry(dev_res, head, list) {
|
|
res = dev_res->res;
|
|
idx = res - &dev_res->dev->resource[0];
|
|
if (resource_size(res) &&
|
|
pci_assign_resource(dev_res->dev, idx)) {
|
|
if (fail_head) {
|
|
/*
|
|
* If the failed resource is a ROM BAR and
|
|
* it will be enabled later, don't add it
|
|
* to the list.
|
|
*/
|
|
if (!((idx == PCI_ROM_RESOURCE) &&
|
|
(!(res->flags & IORESOURCE_ROM_ENABLE))))
|
|
add_to_list(fail_head,
|
|
dev_res->dev, res,
|
|
0 /* don't care */,
|
|
0 /* don't care */);
|
|
}
|
|
reset_resource(res);
|
|
}
|
|
}
|
|
}
|
|
|
|
static unsigned long pci_fail_res_type_mask(struct list_head *fail_head)
|
|
{
|
|
struct pci_dev_resource *fail_res;
|
|
unsigned long mask = 0;
|
|
|
|
/* Check failed type */
|
|
list_for_each_entry(fail_res, fail_head, list)
|
|
mask |= fail_res->flags;
|
|
|
|
/*
|
|
* One pref failed resource will set IORESOURCE_MEM, as we can
|
|
* allocate pref in non-pref range. Will release all assigned
|
|
* non-pref sibling resources according to that bit.
|
|
*/
|
|
return mask & (IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH);
|
|
}
|
|
|
|
static bool pci_need_to_release(unsigned long mask, struct resource *res)
|
|
{
|
|
if (res->flags & IORESOURCE_IO)
|
|
return !!(mask & IORESOURCE_IO);
|
|
|
|
/* Check pref at first */
|
|
if (res->flags & IORESOURCE_PREFETCH) {
|
|
if (mask & IORESOURCE_PREFETCH)
|
|
return true;
|
|
/* Count pref if its parent is non-pref */
|
|
else if ((mask & IORESOURCE_MEM) &&
|
|
!(res->parent->flags & IORESOURCE_PREFETCH))
|
|
return true;
|
|
else
|
|
return false;
|
|
}
|
|
|
|
if (res->flags & IORESOURCE_MEM)
|
|
return !!(mask & IORESOURCE_MEM);
|
|
|
|
return false; /* Should not get here */
|
|
}
|
|
|
|
static void __assign_resources_sorted(struct list_head *head,
|
|
struct list_head *realloc_head,
|
|
struct list_head *fail_head)
|
|
{
|
|
/*
|
|
* Should not assign requested resources at first. They could be
|
|
* adjacent, so later reassign can not reallocate them one by one in
|
|
* parent resource window.
|
|
*
|
|
* Try to assign requested + add_size at beginning. If could do that,
|
|
* could get out early. If could not do that, we still try to assign
|
|
* requested at first, then try to reassign add_size for some resources.
|
|
*
|
|
* Separate three resource type checking if we need to release
|
|
* assigned resource after requested + add_size try.
|
|
*
|
|
* 1. If IO port assignment fails, will release assigned IO
|
|
* port.
|
|
* 2. If pref MMIO assignment fails, release assigned pref
|
|
* MMIO. If assigned pref MMIO's parent is non-pref MMIO
|
|
* and non-pref MMIO assignment fails, will release that
|
|
* assigned pref MMIO.
|
|
* 3. If non-pref MMIO assignment fails or pref MMIO
|
|
* assignment fails, will release assigned non-pref MMIO.
|
|
*/
|
|
LIST_HEAD(save_head);
|
|
LIST_HEAD(local_fail_head);
|
|
struct pci_dev_resource *save_res;
|
|
struct pci_dev_resource *dev_res, *tmp_res, *dev_res2;
|
|
unsigned long fail_type;
|
|
resource_size_t add_align, align;
|
|
|
|
/* Check if optional add_size is there */
|
|
if (!realloc_head || list_empty(realloc_head))
|
|
goto requested_and_reassign;
|
|
|
|
/* Save original start, end, flags etc at first */
|
|
list_for_each_entry(dev_res, head, list) {
|
|
if (add_to_list(&save_head, dev_res->dev, dev_res->res, 0, 0)) {
|
|
free_list(&save_head);
|
|
goto requested_and_reassign;
|
|
}
|
|
}
|
|
|
|
/* Update res in head list with add_size in realloc_head list */
|
|
list_for_each_entry_safe(dev_res, tmp_res, head, list) {
|
|
dev_res->res->end += get_res_add_size(realloc_head,
|
|
dev_res->res);
|
|
|
|
/*
|
|
* There are two kinds of additional resources in the list:
|
|
* 1. bridge resource -- IORESOURCE_STARTALIGN
|
|
* 2. SR-IOV resource -- IORESOURCE_SIZEALIGN
|
|
* Here just fix the additional alignment for bridge
|
|
*/
|
|
if (!(dev_res->res->flags & IORESOURCE_STARTALIGN))
|
|
continue;
|
|
|
|
add_align = get_res_add_align(realloc_head, dev_res->res);
|
|
|
|
/*
|
|
* The "head" list is sorted by alignment so resources with
|
|
* bigger alignment will be assigned first. After we
|
|
* change the alignment of a dev_res in "head" list, we
|
|
* need to reorder the list by alignment to make it
|
|
* consistent.
|
|
*/
|
|
if (add_align > dev_res->res->start) {
|
|
resource_size_t r_size = resource_size(dev_res->res);
|
|
|
|
dev_res->res->start = add_align;
|
|
dev_res->res->end = add_align + r_size - 1;
|
|
|
|
list_for_each_entry(dev_res2, head, list) {
|
|
align = pci_resource_alignment(dev_res2->dev,
|
|
dev_res2->res);
|
|
if (add_align > align) {
|
|
list_move_tail(&dev_res->list,
|
|
&dev_res2->list);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
/* Try updated head list with add_size added */
|
|
assign_requested_resources_sorted(head, &local_fail_head);
|
|
|
|
/* All assigned with add_size? */
|
|
if (list_empty(&local_fail_head)) {
|
|
/* Remove head list from realloc_head list */
|
|
list_for_each_entry(dev_res, head, list)
|
|
remove_from_list(realloc_head, dev_res->res);
|
|
free_list(&save_head);
|
|
free_list(head);
|
|
return;
|
|
}
|
|
|
|
/* Check failed type */
|
|
fail_type = pci_fail_res_type_mask(&local_fail_head);
|
|
/* Remove not need to be released assigned res from head list etc */
|
|
list_for_each_entry_safe(dev_res, tmp_res, head, list)
|
|
if (dev_res->res->parent &&
|
|
!pci_need_to_release(fail_type, dev_res->res)) {
|
|
/* Remove it from realloc_head list */
|
|
remove_from_list(realloc_head, dev_res->res);
|
|
remove_from_list(&save_head, dev_res->res);
|
|
list_del(&dev_res->list);
|
|
kfree(dev_res);
|
|
}
|
|
|
|
free_list(&local_fail_head);
|
|
/* Release assigned resource */
|
|
list_for_each_entry(dev_res, head, list)
|
|
if (dev_res->res->parent)
|
|
release_resource(dev_res->res);
|
|
/* Restore start/end/flags from saved list */
|
|
list_for_each_entry(save_res, &save_head, list) {
|
|
struct resource *res = save_res->res;
|
|
|
|
res->start = save_res->start;
|
|
res->end = save_res->end;
|
|
res->flags = save_res->flags;
|
|
}
|
|
free_list(&save_head);
|
|
|
|
requested_and_reassign:
|
|
/* Satisfy the must-have resource requests */
|
|
assign_requested_resources_sorted(head, fail_head);
|
|
|
|
/* Try to satisfy any additional optional resource requests */
|
|
if (realloc_head)
|
|
reassign_resources_sorted(realloc_head, head);
|
|
free_list(head);
|
|
}
|
|
|
|
static void pdev_assign_resources_sorted(struct pci_dev *dev,
|
|
struct list_head *add_head,
|
|
struct list_head *fail_head)
|
|
{
|
|
LIST_HEAD(head);
|
|
|
|
__dev_sort_resources(dev, &head);
|
|
__assign_resources_sorted(&head, add_head, fail_head);
|
|
|
|
}
|
|
|
|
static void pbus_assign_resources_sorted(const struct pci_bus *bus,
|
|
struct list_head *realloc_head,
|
|
struct list_head *fail_head)
|
|
{
|
|
struct pci_dev *dev;
|
|
LIST_HEAD(head);
|
|
|
|
list_for_each_entry(dev, &bus->devices, bus_list)
|
|
__dev_sort_resources(dev, &head);
|
|
|
|
__assign_resources_sorted(&head, realloc_head, fail_head);
|
|
}
|
|
|
|
void pci_setup_cardbus(struct pci_bus *bus)
|
|
{
|
|
struct pci_dev *bridge = bus->self;
|
|
struct resource *res;
|
|
struct pci_bus_region region;
|
|
|
|
pci_info(bridge, "CardBus bridge to %pR\n",
|
|
&bus->busn_res);
|
|
|
|
res = bus->resource[0];
|
|
pcibios_resource_to_bus(bridge->bus, ®ion, res);
|
|
if (res->flags & IORESOURCE_IO) {
|
|
/*
|
|
* The IO resource is allocated a range twice as large as it
|
|
* would normally need. This allows us to set both IO regs.
|
|
*/
|
|
pci_info(bridge, " bridge window %pR\n", res);
|
|
pci_write_config_dword(bridge, PCI_CB_IO_BASE_0,
|
|
region.start);
|
|
pci_write_config_dword(bridge, PCI_CB_IO_LIMIT_0,
|
|
region.end);
|
|
}
|
|
|
|
res = bus->resource[1];
|
|
pcibios_resource_to_bus(bridge->bus, ®ion, res);
|
|
if (res->flags & IORESOURCE_IO) {
|
|
pci_info(bridge, " bridge window %pR\n", res);
|
|
pci_write_config_dword(bridge, PCI_CB_IO_BASE_1,
|
|
region.start);
|
|
pci_write_config_dword(bridge, PCI_CB_IO_LIMIT_1,
|
|
region.end);
|
|
}
|
|
|
|
res = bus->resource[2];
|
|
pcibios_resource_to_bus(bridge->bus, ®ion, res);
|
|
if (res->flags & IORESOURCE_MEM) {
|
|
pci_info(bridge, " bridge window %pR\n", res);
|
|
pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_0,
|
|
region.start);
|
|
pci_write_config_dword(bridge, PCI_CB_MEMORY_LIMIT_0,
|
|
region.end);
|
|
}
|
|
|
|
res = bus->resource[3];
|
|
pcibios_resource_to_bus(bridge->bus, ®ion, res);
|
|
if (res->flags & IORESOURCE_MEM) {
|
|
pci_info(bridge, " bridge window %pR\n", res);
|
|
pci_write_config_dword(bridge, PCI_CB_MEMORY_BASE_1,
|
|
region.start);
|
|
pci_write_config_dword(bridge, PCI_CB_MEMORY_LIMIT_1,
|
|
region.end);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(pci_setup_cardbus);
|
|
|
|
/*
|
|
* Initialize bridges with base/limit values we have collected. PCI-to-PCI
|
|
* Bridge Architecture Specification rev. 1.1 (1998) requires that if there
|
|
* are no I/O ports or memory behind the bridge, the corresponding range
|
|
* must be turned off by writing base value greater than limit to the
|
|
* bridge's base/limit registers.
|
|
*
|
|
* Note: care must be taken when updating I/O base/limit registers of
|
|
* bridges which support 32-bit I/O. This update requires two config space
|
|
* writes, so it's quite possible that an I/O window of the bridge will
|
|
* have some undesirable address (e.g. 0) after the first write. Ditto
|
|
* 64-bit prefetchable MMIO.
|
|
*/
|
|
static void pci_setup_bridge_io(struct pci_dev *bridge)
|
|
{
|
|
struct resource *res;
|
|
const char *res_name;
|
|
struct pci_bus_region region;
|
|
unsigned long io_mask;
|
|
u8 io_base_lo, io_limit_lo;
|
|
u16 l;
|
|
u32 io_upper16;
|
|
|
|
io_mask = PCI_IO_RANGE_MASK;
|
|
if (bridge->io_window_1k)
|
|
io_mask = PCI_IO_1K_RANGE_MASK;
|
|
|
|
/* Set up the top and bottom of the PCI I/O segment for this bus */
|
|
res = &bridge->resource[PCI_BRIDGE_IO_WINDOW];
|
|
res_name = pci_resource_name(bridge, PCI_BRIDGE_IO_WINDOW);
|
|
pcibios_resource_to_bus(bridge->bus, ®ion, res);
|
|
if (res->flags & IORESOURCE_IO) {
|
|
pci_read_config_word(bridge, PCI_IO_BASE, &l);
|
|
io_base_lo = (region.start >> 8) & io_mask;
|
|
io_limit_lo = (region.end >> 8) & io_mask;
|
|
l = ((u16) io_limit_lo << 8) | io_base_lo;
|
|
/* Set up upper 16 bits of I/O base/limit */
|
|
io_upper16 = (region.end & 0xffff0000) | (region.start >> 16);
|
|
pci_info(bridge, " %s %pR\n", res_name, res);
|
|
} else {
|
|
/* Clear upper 16 bits of I/O base/limit */
|
|
io_upper16 = 0;
|
|
l = 0x00f0;
|
|
}
|
|
/* Temporarily disable the I/O range before updating PCI_IO_BASE */
|
|
pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, 0x0000ffff);
|
|
/* Update lower 16 bits of I/O base/limit */
|
|
pci_write_config_word(bridge, PCI_IO_BASE, l);
|
|
/* Update upper 16 bits of I/O base/limit */
|
|
pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, io_upper16);
|
|
}
|
|
|
|
static void pci_setup_bridge_mmio(struct pci_dev *bridge)
|
|
{
|
|
struct resource *res;
|
|
const char *res_name;
|
|
struct pci_bus_region region;
|
|
u32 l;
|
|
|
|
/* Set up the top and bottom of the PCI Memory segment for this bus */
|
|
res = &bridge->resource[PCI_BRIDGE_MEM_WINDOW];
|
|
res_name = pci_resource_name(bridge, PCI_BRIDGE_MEM_WINDOW);
|
|
pcibios_resource_to_bus(bridge->bus, ®ion, res);
|
|
if (res->flags & IORESOURCE_MEM) {
|
|
l = (region.start >> 16) & 0xfff0;
|
|
l |= region.end & 0xfff00000;
|
|
pci_info(bridge, " %s %pR\n", res_name, res);
|
|
} else {
|
|
l = 0x0000fff0;
|
|
}
|
|
pci_write_config_dword(bridge, PCI_MEMORY_BASE, l);
|
|
}
|
|
|
|
static void pci_setup_bridge_mmio_pref(struct pci_dev *bridge)
|
|
{
|
|
struct resource *res;
|
|
const char *res_name;
|
|
struct pci_bus_region region;
|
|
u32 l, bu, lu;
|
|
|
|
/*
|
|
* Clear out the upper 32 bits of PREF limit. If
|
|
* PCI_PREF_BASE_UPPER32 was non-zero, this temporarily disables
|
|
* PREF range, which is ok.
|
|
*/
|
|
pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, 0);
|
|
|
|
/* Set up PREF base/limit */
|
|
bu = lu = 0;
|
|
res = &bridge->resource[PCI_BRIDGE_PREF_MEM_WINDOW];
|
|
res_name = pci_resource_name(bridge, PCI_BRIDGE_PREF_MEM_WINDOW);
|
|
pcibios_resource_to_bus(bridge->bus, ®ion, res);
|
|
if (res->flags & IORESOURCE_PREFETCH) {
|
|
l = (region.start >> 16) & 0xfff0;
|
|
l |= region.end & 0xfff00000;
|
|
if (res->flags & IORESOURCE_MEM_64) {
|
|
bu = upper_32_bits(region.start);
|
|
lu = upper_32_bits(region.end);
|
|
}
|
|
pci_info(bridge, " %s %pR\n", res_name, res);
|
|
} else {
|
|
l = 0x0000fff0;
|
|
}
|
|
pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, l);
|
|
|
|
/* Set the upper 32 bits of PREF base & limit */
|
|
pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
|
|
pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
|
|
}
|
|
|
|
static void __pci_setup_bridge(struct pci_bus *bus, unsigned long type)
|
|
{
|
|
struct pci_dev *bridge = bus->self;
|
|
|
|
pci_info(bridge, "PCI bridge to %pR\n",
|
|
&bus->busn_res);
|
|
|
|
if (type & IORESOURCE_IO)
|
|
pci_setup_bridge_io(bridge);
|
|
|
|
if (type & IORESOURCE_MEM)
|
|
pci_setup_bridge_mmio(bridge);
|
|
|
|
if (type & IORESOURCE_PREFETCH)
|
|
pci_setup_bridge_mmio_pref(bridge);
|
|
|
|
pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
|
|
}
|
|
|
|
void __weak pcibios_setup_bridge(struct pci_bus *bus, unsigned long type)
|
|
{
|
|
}
|
|
|
|
void pci_setup_bridge(struct pci_bus *bus)
|
|
{
|
|
unsigned long type = IORESOURCE_IO | IORESOURCE_MEM |
|
|
IORESOURCE_PREFETCH;
|
|
|
|
pcibios_setup_bridge(bus, type);
|
|
__pci_setup_bridge(bus, type);
|
|
}
|
|
|
|
|
|
int pci_claim_bridge_resource(struct pci_dev *bridge, int i)
|
|
{
|
|
if (i < PCI_BRIDGE_RESOURCES || i > PCI_BRIDGE_RESOURCE_END)
|
|
return 0;
|
|
|
|
if (pci_claim_resource(bridge, i) == 0)
|
|
return 0; /* Claimed the window */
|
|
|
|
if ((bridge->class >> 8) != PCI_CLASS_BRIDGE_PCI)
|
|
return 0;
|
|
|
|
if (!pci_bus_clip_resource(bridge, i))
|
|
return -EINVAL; /* Clipping didn't change anything */
|
|
|
|
switch (i) {
|
|
case PCI_BRIDGE_IO_WINDOW:
|
|
pci_setup_bridge_io(bridge);
|
|
break;
|
|
case PCI_BRIDGE_MEM_WINDOW:
|
|
pci_setup_bridge_mmio(bridge);
|
|
break;
|
|
case PCI_BRIDGE_PREF_MEM_WINDOW:
|
|
pci_setup_bridge_mmio_pref(bridge);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (pci_claim_resource(bridge, i) == 0)
|
|
return 0; /* Claimed a smaller window */
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Check whether the bridge supports optional I/O and prefetchable memory
|
|
* ranges. If not, the respective base/limit registers must be read-only
|
|
* and read as 0.
|
|
*/
|
|
static void pci_bridge_check_ranges(struct pci_bus *bus)
|
|
{
|
|
struct pci_dev *bridge = bus->self;
|
|
struct resource *b_res;
|
|
|
|
b_res = &bridge->resource[PCI_BRIDGE_MEM_WINDOW];
|
|
b_res->flags |= IORESOURCE_MEM;
|
|
|
|
if (bridge->io_window) {
|
|
b_res = &bridge->resource[PCI_BRIDGE_IO_WINDOW];
|
|
b_res->flags |= IORESOURCE_IO;
|
|
}
|
|
|
|
if (bridge->pref_window) {
|
|
b_res = &bridge->resource[PCI_BRIDGE_PREF_MEM_WINDOW];
|
|
b_res->flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH;
|
|
if (bridge->pref_64_window) {
|
|
b_res->flags |= IORESOURCE_MEM_64 |
|
|
PCI_PREF_RANGE_TYPE_64;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Helper function for sizing routines. Assigned resources have non-NULL
|
|
* parent resource.
|
|
*
|
|
* Return first unassigned resource of the correct type. If there is none,
|
|
* return first assigned resource of the correct type. If none of the
|
|
* above, return NULL.
|
|
*
|
|
* Returning an assigned resource of the correct type allows the caller to
|
|
* distinguish between already assigned and no resource of the correct type.
|
|
*/
|
|
static struct resource *find_bus_resource_of_type(struct pci_bus *bus,
|
|
unsigned long type_mask,
|
|
unsigned long type)
|
|
{
|
|
struct resource *r, *r_assigned = NULL;
|
|
|
|
pci_bus_for_each_resource(bus, r) {
|
|
if (r == &ioport_resource || r == &iomem_resource)
|
|
continue;
|
|
if (r && (r->flags & type_mask) == type && !r->parent)
|
|
return r;
|
|
if (r && (r->flags & type_mask) == type && !r_assigned)
|
|
r_assigned = r;
|
|
}
|
|
return r_assigned;
|
|
}
|
|
|
|
static resource_size_t calculate_iosize(resource_size_t size,
|
|
resource_size_t min_size,
|
|
resource_size_t size1,
|
|
resource_size_t add_size,
|
|
resource_size_t children_add_size,
|
|
resource_size_t old_size,
|
|
resource_size_t align)
|
|
{
|
|
if (size < min_size)
|
|
size = min_size;
|
|
if (old_size == 1)
|
|
old_size = 0;
|
|
/*
|
|
* To be fixed in 2.5: we should have sort of HAVE_ISA flag in the
|
|
* struct pci_bus.
|
|
*/
|
|
#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
|
|
size = (size & 0xff) + ((size & ~0xffUL) << 2);
|
|
#endif
|
|
size = size + size1;
|
|
if (size < old_size)
|
|
size = old_size;
|
|
|
|
size = ALIGN(max(size, add_size) + children_add_size, align);
|
|
return size;
|
|
}
|
|
|
|
static resource_size_t calculate_memsize(resource_size_t size,
|
|
resource_size_t min_size,
|
|
resource_size_t add_size,
|
|
resource_size_t children_add_size,
|
|
resource_size_t old_size,
|
|
resource_size_t align)
|
|
{
|
|
if (size < min_size)
|
|
size = min_size;
|
|
if (old_size == 1)
|
|
old_size = 0;
|
|
|
|
size = max(size, add_size) + children_add_size;
|
|
return ALIGN(max(size, old_size), align);
|
|
}
|
|
|
|
resource_size_t __weak pcibios_window_alignment(struct pci_bus *bus,
|
|
unsigned long type)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
#define PCI_P2P_DEFAULT_MEM_ALIGN 0x100000 /* 1MiB */
|
|
#define PCI_P2P_DEFAULT_IO_ALIGN 0x1000 /* 4KiB */
|
|
#define PCI_P2P_DEFAULT_IO_ALIGN_1K 0x400 /* 1KiB */
|
|
|
|
static resource_size_t window_alignment(struct pci_bus *bus, unsigned long type)
|
|
{
|
|
resource_size_t align = 1, arch_align;
|
|
|
|
if (type & IORESOURCE_MEM)
|
|
align = PCI_P2P_DEFAULT_MEM_ALIGN;
|
|
else if (type & IORESOURCE_IO) {
|
|
/*
|
|
* Per spec, I/O windows are 4K-aligned, but some bridges have
|
|
* an extension to support 1K alignment.
|
|
*/
|
|
if (bus->self && bus->self->io_window_1k)
|
|
align = PCI_P2P_DEFAULT_IO_ALIGN_1K;
|
|
else
|
|
align = PCI_P2P_DEFAULT_IO_ALIGN;
|
|
}
|
|
|
|
arch_align = pcibios_window_alignment(bus, type);
|
|
return max(align, arch_align);
|
|
}
|
|
|
|
/**
|
|
* pbus_size_io() - Size the I/O window of a given bus
|
|
*
|
|
* @bus: The bus
|
|
* @min_size: The minimum I/O window that must be allocated
|
|
* @add_size: Additional optional I/O window
|
|
* @realloc_head: Track the additional I/O window on this list
|
|
*
|
|
* Sizing the I/O windows of the PCI-PCI bridge is trivial, since these
|
|
* windows have 1K or 4K granularity and the I/O ranges of non-bridge PCI
|
|
* devices are limited to 256 bytes. We must be careful with the ISA
|
|
* aliasing though.
|
|
*/
|
|
static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size,
|
|
resource_size_t add_size,
|
|
struct list_head *realloc_head)
|
|
{
|
|
struct pci_dev *dev;
|
|
struct resource *b_res = find_bus_resource_of_type(bus, IORESOURCE_IO,
|
|
IORESOURCE_IO);
|
|
resource_size_t size = 0, size0 = 0, size1 = 0;
|
|
resource_size_t children_add_size = 0;
|
|
resource_size_t min_align, align;
|
|
|
|
if (!b_res)
|
|
return;
|
|
|
|
/* If resource is already assigned, nothing more to do */
|
|
if (b_res->parent)
|
|
return;
|
|
|
|
min_align = window_alignment(bus, IORESOURCE_IO);
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
struct resource *r;
|
|
|
|
pci_dev_for_each_resource(dev, r) {
|
|
unsigned long r_size;
|
|
|
|
if (r->parent || !(r->flags & IORESOURCE_IO))
|
|
continue;
|
|
r_size = resource_size(r);
|
|
|
|
if (r_size < 0x400)
|
|
/* Might be re-aligned for ISA */
|
|
size += r_size;
|
|
else
|
|
size1 += r_size;
|
|
|
|
align = pci_resource_alignment(dev, r);
|
|
if (align > min_align)
|
|
min_align = align;
|
|
|
|
if (realloc_head)
|
|
children_add_size += get_res_add_size(realloc_head, r);
|
|
}
|
|
}
|
|
|
|
size0 = calculate_iosize(size, min_size, size1, 0, 0,
|
|
resource_size(b_res), min_align);
|
|
size1 = (!realloc_head || (realloc_head && !add_size && !children_add_size)) ? size0 :
|
|
calculate_iosize(size, min_size, size1, add_size, children_add_size,
|
|
resource_size(b_res), min_align);
|
|
if (!size0 && !size1) {
|
|
if (bus->self && (b_res->start || b_res->end))
|
|
pci_info(bus->self, "disabling bridge window %pR to %pR (unused)\n",
|
|
b_res, &bus->busn_res);
|
|
b_res->flags = 0;
|
|
return;
|
|
}
|
|
|
|
b_res->start = min_align;
|
|
b_res->end = b_res->start + size0 - 1;
|
|
b_res->flags |= IORESOURCE_STARTALIGN;
|
|
if (bus->self && size1 > size0 && realloc_head) {
|
|
add_to_list(realloc_head, bus->self, b_res, size1-size0,
|
|
min_align);
|
|
pci_info(bus->self, "bridge window %pR to %pR add_size %llx\n",
|
|
b_res, &bus->busn_res,
|
|
(unsigned long long) size1 - size0);
|
|
}
|
|
}
|
|
|
|
static inline resource_size_t calculate_mem_align(resource_size_t *aligns,
|
|
int max_order)
|
|
{
|
|
resource_size_t align = 0;
|
|
resource_size_t min_align = 0;
|
|
int order;
|
|
|
|
for (order = 0; order <= max_order; order++) {
|
|
resource_size_t align1 = 1;
|
|
|
|
align1 <<= order + __ffs(SZ_1M);
|
|
|
|
if (!align)
|
|
min_align = align1;
|
|
else if (ALIGN(align + min_align, min_align) < align1)
|
|
min_align = align1 >> 1;
|
|
align += aligns[order];
|
|
}
|
|
|
|
return min_align;
|
|
}
|
|
|
|
/**
|
|
* pbus_upstream_space_available - Check no upstream resource limits allocation
|
|
* @bus: The bus
|
|
* @mask: Mask the resource flag, then compare it with type
|
|
* @type: The type of resource from bridge
|
|
* @size: The size required from the bridge window
|
|
* @align: Required alignment for the resource
|
|
*
|
|
* Checks that @size can fit inside the upstream bridge resources that are
|
|
* already assigned.
|
|
*
|
|
* Return: %true if enough space is available on all assigned upstream
|
|
* resources.
|
|
*/
|
|
static bool pbus_upstream_space_available(struct pci_bus *bus, unsigned long mask,
|
|
unsigned long type, resource_size_t size,
|
|
resource_size_t align)
|
|
{
|
|
struct resource_constraint constraint = {
|
|
.max = RESOURCE_SIZE_MAX,
|
|
.align = align,
|
|
};
|
|
struct pci_bus *downstream = bus;
|
|
struct resource *r;
|
|
|
|
while ((bus = bus->parent)) {
|
|
if (pci_is_root_bus(bus))
|
|
break;
|
|
|
|
pci_bus_for_each_resource(bus, r) {
|
|
if (!r || !r->parent || (r->flags & mask) != type)
|
|
continue;
|
|
|
|
if (resource_size(r) >= size) {
|
|
struct resource gap = {};
|
|
|
|
if (find_resource_space(r, &gap, size, &constraint) == 0) {
|
|
gap.flags = type;
|
|
pci_dbg(bus->self,
|
|
"Assigned bridge window %pR to %pR free space at %pR\n",
|
|
r, &bus->busn_res, &gap);
|
|
return true;
|
|
}
|
|
}
|
|
|
|
if (bus->self) {
|
|
pci_info(bus->self,
|
|
"Assigned bridge window %pR to %pR cannot fit 0x%llx required for %s bridging to %pR\n",
|
|
r, &bus->busn_res,
|
|
(unsigned long long)size,
|
|
pci_name(downstream->self),
|
|
&downstream->busn_res);
|
|
}
|
|
|
|
return false;
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
/**
|
|
* pbus_size_mem() - Size the memory window of a given bus
|
|
*
|
|
* @bus: The bus
|
|
* @mask: Mask the resource flag, then compare it with type
|
|
* @type: The type of free resource from bridge
|
|
* @type2: Second match type
|
|
* @type3: Third match type
|
|
* @min_size: The minimum memory window that must be allocated
|
|
* @add_size: Additional optional memory window
|
|
* @realloc_head: Track the additional memory window on this list
|
|
*
|
|
* Calculate the size of the bus and minimal alignment which guarantees
|
|
* that all child resources fit in this size.
|
|
*
|
|
* Return -ENOSPC if there's no available bus resource of the desired
|
|
* type. Otherwise, set the bus resource start/end to indicate the
|
|
* required size, add things to realloc_head (if supplied), and return 0.
|
|
*/
|
|
static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
|
|
unsigned long type, unsigned long type2,
|
|
unsigned long type3, resource_size_t min_size,
|
|
resource_size_t add_size,
|
|
struct list_head *realloc_head)
|
|
{
|
|
struct pci_dev *dev;
|
|
resource_size_t min_align, win_align, align, size, size0, size1;
|
|
resource_size_t aligns[24]; /* Alignments from 1MB to 8TB */
|
|
int order, max_order;
|
|
struct resource *b_res = find_bus_resource_of_type(bus,
|
|
mask | IORESOURCE_PREFETCH, type);
|
|
resource_size_t children_add_size = 0;
|
|
resource_size_t children_add_align = 0;
|
|
resource_size_t add_align = 0;
|
|
|
|
if (!b_res)
|
|
return -ENOSPC;
|
|
|
|
/* If resource is already assigned, nothing more to do */
|
|
if (b_res->parent)
|
|
return 0;
|
|
|
|
memset(aligns, 0, sizeof(aligns));
|
|
max_order = 0;
|
|
size = 0;
|
|
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
struct resource *r;
|
|
int i;
|
|
|
|
pci_dev_for_each_resource(dev, r, i) {
|
|
const char *r_name = pci_resource_name(dev, i);
|
|
resource_size_t r_size;
|
|
|
|
if (r->parent || (r->flags & IORESOURCE_PCI_FIXED) ||
|
|
((r->flags & mask) != type &&
|
|
(r->flags & mask) != type2 &&
|
|
(r->flags & mask) != type3))
|
|
continue;
|
|
r_size = resource_size(r);
|
|
#ifdef CONFIG_PCI_IOV
|
|
/* Put SRIOV requested res to the optional list */
|
|
if (realloc_head && i >= PCI_IOV_RESOURCES &&
|
|
i <= PCI_IOV_RESOURCE_END) {
|
|
add_align = max(pci_resource_alignment(dev, r), add_align);
|
|
r->end = r->start - 1;
|
|
add_to_list(realloc_head, dev, r, r_size, 0 /* Don't care */);
|
|
children_add_size += r_size;
|
|
continue;
|
|
}
|
|
#endif
|
|
/*
|
|
* aligns[0] is for 1MB (since bridge memory
|
|
* windows are always at least 1MB aligned), so
|
|
* keep "order" from being negative for smaller
|
|
* resources.
|
|
*/
|
|
align = pci_resource_alignment(dev, r);
|
|
order = __ffs(align) - __ffs(SZ_1M);
|
|
if (order < 0)
|
|
order = 0;
|
|
if (order >= ARRAY_SIZE(aligns)) {
|
|
pci_warn(dev, "%s %pR: disabling; bad alignment %#llx\n",
|
|
r_name, r, (unsigned long long) align);
|
|
r->flags = 0;
|
|
continue;
|
|
}
|
|
size += max(r_size, align);
|
|
/*
|
|
* Exclude ranges with size > align from calculation of
|
|
* the alignment.
|
|
*/
|
|
if (r_size <= align)
|
|
aligns[order] += align;
|
|
if (order > max_order)
|
|
max_order = order;
|
|
|
|
if (realloc_head) {
|
|
children_add_size += get_res_add_size(realloc_head, r);
|
|
children_add_align = get_res_add_align(realloc_head, r);
|
|
add_align = max(add_align, children_add_align);
|
|
}
|
|
}
|
|
}
|
|
|
|
win_align = window_alignment(bus, b_res->flags);
|
|
min_align = calculate_mem_align(aligns, max_order);
|
|
min_align = max(min_align, win_align);
|
|
size0 = calculate_memsize(size, min_size, 0, 0, resource_size(b_res), min_align);
|
|
add_align = max(min_align, add_align);
|
|
|
|
if (bus->self && size0 &&
|
|
!pbus_upstream_space_available(bus, mask | IORESOURCE_PREFETCH, type,
|
|
size0, add_align)) {
|
|
min_align = 1ULL << (max_order + __ffs(SZ_1M));
|
|
min_align = max(min_align, win_align);
|
|
size0 = calculate_memsize(size, min_size, 0, 0, resource_size(b_res), win_align);
|
|
add_align = win_align;
|
|
pci_info(bus->self, "bridge window %pR to %pR requires relaxed alignment rules\n",
|
|
b_res, &bus->busn_res);
|
|
}
|
|
|
|
size1 = (!realloc_head || (realloc_head && !add_size && !children_add_size)) ? size0 :
|
|
calculate_memsize(size, min_size, add_size, children_add_size,
|
|
resource_size(b_res), add_align);
|
|
if (!size0 && !size1) {
|
|
if (bus->self && (b_res->start || b_res->end))
|
|
pci_info(bus->self, "disabling bridge window %pR to %pR (unused)\n",
|
|
b_res, &bus->busn_res);
|
|
b_res->flags = 0;
|
|
return 0;
|
|
}
|
|
b_res->start = min_align;
|
|
b_res->end = size0 + min_align - 1;
|
|
b_res->flags |= IORESOURCE_STARTALIGN;
|
|
if (bus->self && size1 > size0 && realloc_head) {
|
|
add_to_list(realloc_head, bus->self, b_res, size1-size0, add_align);
|
|
pci_info(bus->self, "bridge window %pR to %pR add_size %llx add_align %llx\n",
|
|
b_res, &bus->busn_res,
|
|
(unsigned long long) (size1 - size0),
|
|
(unsigned long long) add_align);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
unsigned long pci_cardbus_resource_alignment(struct resource *res)
|
|
{
|
|
if (res->flags & IORESOURCE_IO)
|
|
return pci_cardbus_io_size;
|
|
if (res->flags & IORESOURCE_MEM)
|
|
return pci_cardbus_mem_size;
|
|
return 0;
|
|
}
|
|
|
|
static void pci_bus_size_cardbus(struct pci_bus *bus,
|
|
struct list_head *realloc_head)
|
|
{
|
|
struct pci_dev *bridge = bus->self;
|
|
struct resource *b_res;
|
|
resource_size_t b_res_3_size = pci_cardbus_mem_size * 2;
|
|
u16 ctrl;
|
|
|
|
b_res = &bridge->resource[PCI_CB_BRIDGE_IO_0_WINDOW];
|
|
if (b_res->parent)
|
|
goto handle_b_res_1;
|
|
/*
|
|
* Reserve some resources for CardBus. We reserve a fixed amount
|
|
* of bus space for CardBus bridges.
|
|
*/
|
|
b_res->start = pci_cardbus_io_size;
|
|
b_res->end = b_res->start + pci_cardbus_io_size - 1;
|
|
b_res->flags |= IORESOURCE_IO | IORESOURCE_STARTALIGN;
|
|
if (realloc_head) {
|
|
b_res->end -= pci_cardbus_io_size;
|
|
add_to_list(realloc_head, bridge, b_res, pci_cardbus_io_size,
|
|
pci_cardbus_io_size);
|
|
}
|
|
|
|
handle_b_res_1:
|
|
b_res = &bridge->resource[PCI_CB_BRIDGE_IO_1_WINDOW];
|
|
if (b_res->parent)
|
|
goto handle_b_res_2;
|
|
b_res->start = pci_cardbus_io_size;
|
|
b_res->end = b_res->start + pci_cardbus_io_size - 1;
|
|
b_res->flags |= IORESOURCE_IO | IORESOURCE_STARTALIGN;
|
|
if (realloc_head) {
|
|
b_res->end -= pci_cardbus_io_size;
|
|
add_to_list(realloc_head, bridge, b_res, pci_cardbus_io_size,
|
|
pci_cardbus_io_size);
|
|
}
|
|
|
|
handle_b_res_2:
|
|
/* MEM1 must not be pref MMIO */
|
|
pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl);
|
|
if (ctrl & PCI_CB_BRIDGE_CTL_PREFETCH_MEM1) {
|
|
ctrl &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1;
|
|
pci_write_config_word(bridge, PCI_CB_BRIDGE_CONTROL, ctrl);
|
|
pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl);
|
|
}
|
|
|
|
/* Check whether prefetchable memory is supported by this bridge. */
|
|
pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl);
|
|
if (!(ctrl & PCI_CB_BRIDGE_CTL_PREFETCH_MEM0)) {
|
|
ctrl |= PCI_CB_BRIDGE_CTL_PREFETCH_MEM0;
|
|
pci_write_config_word(bridge, PCI_CB_BRIDGE_CONTROL, ctrl);
|
|
pci_read_config_word(bridge, PCI_CB_BRIDGE_CONTROL, &ctrl);
|
|
}
|
|
|
|
b_res = &bridge->resource[PCI_CB_BRIDGE_MEM_0_WINDOW];
|
|
if (b_res->parent)
|
|
goto handle_b_res_3;
|
|
/*
|
|
* If we have prefetchable memory support, allocate two regions.
|
|
* Otherwise, allocate one region of twice the size.
|
|
*/
|
|
if (ctrl & PCI_CB_BRIDGE_CTL_PREFETCH_MEM0) {
|
|
b_res->start = pci_cardbus_mem_size;
|
|
b_res->end = b_res->start + pci_cardbus_mem_size - 1;
|
|
b_res->flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH |
|
|
IORESOURCE_STARTALIGN;
|
|
if (realloc_head) {
|
|
b_res->end -= pci_cardbus_mem_size;
|
|
add_to_list(realloc_head, bridge, b_res,
|
|
pci_cardbus_mem_size, pci_cardbus_mem_size);
|
|
}
|
|
|
|
/* Reduce that to half */
|
|
b_res_3_size = pci_cardbus_mem_size;
|
|
}
|
|
|
|
handle_b_res_3:
|
|
b_res = &bridge->resource[PCI_CB_BRIDGE_MEM_1_WINDOW];
|
|
if (b_res->parent)
|
|
goto handle_done;
|
|
b_res->start = pci_cardbus_mem_size;
|
|
b_res->end = b_res->start + b_res_3_size - 1;
|
|
b_res->flags |= IORESOURCE_MEM | IORESOURCE_STARTALIGN;
|
|
if (realloc_head) {
|
|
b_res->end -= b_res_3_size;
|
|
add_to_list(realloc_head, bridge, b_res, b_res_3_size,
|
|
pci_cardbus_mem_size);
|
|
}
|
|
|
|
handle_done:
|
|
;
|
|
}
|
|
|
|
void __pci_bus_size_bridges(struct pci_bus *bus, struct list_head *realloc_head)
|
|
{
|
|
struct pci_dev *dev;
|
|
unsigned long mask, prefmask, type2 = 0, type3 = 0;
|
|
resource_size_t additional_io_size = 0, additional_mmio_size = 0,
|
|
additional_mmio_pref_size = 0;
|
|
struct resource *pref;
|
|
struct pci_host_bridge *host;
|
|
int hdr_type, ret;
|
|
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
struct pci_bus *b = dev->subordinate;
|
|
if (!b)
|
|
continue;
|
|
|
|
switch (dev->hdr_type) {
|
|
case PCI_HEADER_TYPE_CARDBUS:
|
|
pci_bus_size_cardbus(b, realloc_head);
|
|
break;
|
|
|
|
case PCI_HEADER_TYPE_BRIDGE:
|
|
default:
|
|
__pci_bus_size_bridges(b, realloc_head);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* The root bus? */
|
|
if (pci_is_root_bus(bus)) {
|
|
host = to_pci_host_bridge(bus->bridge);
|
|
if (!host->size_windows)
|
|
return;
|
|
pci_bus_for_each_resource(bus, pref)
|
|
if (pref && (pref->flags & IORESOURCE_PREFETCH))
|
|
break;
|
|
hdr_type = -1; /* Intentionally invalid - not a PCI device. */
|
|
} else {
|
|
pref = &bus->self->resource[PCI_BRIDGE_PREF_MEM_WINDOW];
|
|
hdr_type = bus->self->hdr_type;
|
|
}
|
|
|
|
switch (hdr_type) {
|
|
case PCI_HEADER_TYPE_CARDBUS:
|
|
/* Don't size CardBuses yet */
|
|
break;
|
|
|
|
case PCI_HEADER_TYPE_BRIDGE:
|
|
pci_bridge_check_ranges(bus);
|
|
if (bus->self->is_hotplug_bridge) {
|
|
additional_io_size = pci_hotplug_io_size;
|
|
additional_mmio_size = pci_hotplug_mmio_size;
|
|
additional_mmio_pref_size = pci_hotplug_mmio_pref_size;
|
|
}
|
|
fallthrough;
|
|
default:
|
|
pbus_size_io(bus, realloc_head ? 0 : additional_io_size,
|
|
additional_io_size, realloc_head);
|
|
|
|
/*
|
|
* If there's a 64-bit prefetchable MMIO window, compute
|
|
* the size required to put all 64-bit prefetchable
|
|
* resources in it.
|
|
*/
|
|
mask = IORESOURCE_MEM;
|
|
prefmask = IORESOURCE_MEM | IORESOURCE_PREFETCH;
|
|
if (pref && (pref->flags & IORESOURCE_MEM_64)) {
|
|
prefmask |= IORESOURCE_MEM_64;
|
|
ret = pbus_size_mem(bus, prefmask, prefmask,
|
|
prefmask, prefmask,
|
|
realloc_head ? 0 : additional_mmio_pref_size,
|
|
additional_mmio_pref_size, realloc_head);
|
|
|
|
/*
|
|
* If successful, all non-prefetchable resources
|
|
* and any 32-bit prefetchable resources will go in
|
|
* the non-prefetchable window.
|
|
*/
|
|
if (ret == 0) {
|
|
mask = prefmask;
|
|
type2 = prefmask & ~IORESOURCE_MEM_64;
|
|
type3 = prefmask & ~IORESOURCE_PREFETCH;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If there is no 64-bit prefetchable window, compute the
|
|
* size required to put all prefetchable resources in the
|
|
* 32-bit prefetchable window (if there is one).
|
|
*/
|
|
if (!type2) {
|
|
prefmask &= ~IORESOURCE_MEM_64;
|
|
ret = pbus_size_mem(bus, prefmask, prefmask,
|
|
prefmask, prefmask,
|
|
realloc_head ? 0 : additional_mmio_pref_size,
|
|
additional_mmio_pref_size, realloc_head);
|
|
|
|
/*
|
|
* If successful, only non-prefetchable resources
|
|
* will go in the non-prefetchable window.
|
|
*/
|
|
if (ret == 0)
|
|
mask = prefmask;
|
|
else
|
|
additional_mmio_size += additional_mmio_pref_size;
|
|
|
|
type2 = type3 = IORESOURCE_MEM;
|
|
}
|
|
|
|
/*
|
|
* Compute the size required to put everything else in the
|
|
* non-prefetchable window. This includes:
|
|
*
|
|
* - all non-prefetchable resources
|
|
* - 32-bit prefetchable resources if there's a 64-bit
|
|
* prefetchable window or no prefetchable window at all
|
|
* - 64-bit prefetchable resources if there's no prefetchable
|
|
* window at all
|
|
*
|
|
* Note that the strategy in __pci_assign_resource() must match
|
|
* that used here. Specifically, we cannot put a 32-bit
|
|
* prefetchable resource in a 64-bit prefetchable window.
|
|
*/
|
|
pbus_size_mem(bus, mask, IORESOURCE_MEM, type2, type3,
|
|
realloc_head ? 0 : additional_mmio_size,
|
|
additional_mmio_size, realloc_head);
|
|
break;
|
|
}
|
|
}
|
|
|
|
void pci_bus_size_bridges(struct pci_bus *bus)
|
|
{
|
|
__pci_bus_size_bridges(bus, NULL);
|
|
}
|
|
EXPORT_SYMBOL(pci_bus_size_bridges);
|
|
|
|
static void assign_fixed_resource_on_bus(struct pci_bus *b, struct resource *r)
|
|
{
|
|
struct resource *parent_r;
|
|
unsigned long mask = IORESOURCE_IO | IORESOURCE_MEM |
|
|
IORESOURCE_PREFETCH;
|
|
|
|
pci_bus_for_each_resource(b, parent_r) {
|
|
if (!parent_r)
|
|
continue;
|
|
|
|
if ((r->flags & mask) == (parent_r->flags & mask) &&
|
|
resource_contains(parent_r, r))
|
|
request_resource(parent_r, r);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Try to assign any resources marked as IORESOURCE_PCI_FIXED, as they are
|
|
* skipped by pbus_assign_resources_sorted().
|
|
*/
|
|
static void pdev_assign_fixed_resources(struct pci_dev *dev)
|
|
{
|
|
struct resource *r;
|
|
|
|
pci_dev_for_each_resource(dev, r) {
|
|
struct pci_bus *b;
|
|
|
|
if (r->parent || !(r->flags & IORESOURCE_PCI_FIXED) ||
|
|
!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
|
|
continue;
|
|
|
|
b = dev->bus;
|
|
while (b && !r->parent) {
|
|
assign_fixed_resource_on_bus(b, r);
|
|
b = b->parent;
|
|
}
|
|
}
|
|
}
|
|
|
|
void __pci_bus_assign_resources(const struct pci_bus *bus,
|
|
struct list_head *realloc_head,
|
|
struct list_head *fail_head)
|
|
{
|
|
struct pci_bus *b;
|
|
struct pci_dev *dev;
|
|
|
|
pbus_assign_resources_sorted(bus, realloc_head, fail_head);
|
|
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
pdev_assign_fixed_resources(dev);
|
|
|
|
b = dev->subordinate;
|
|
if (!b)
|
|
continue;
|
|
|
|
__pci_bus_assign_resources(b, realloc_head, fail_head);
|
|
|
|
switch (dev->hdr_type) {
|
|
case PCI_HEADER_TYPE_BRIDGE:
|
|
if (!pci_is_enabled(dev))
|
|
pci_setup_bridge(b);
|
|
break;
|
|
|
|
case PCI_HEADER_TYPE_CARDBUS:
|
|
pci_setup_cardbus(b);
|
|
break;
|
|
|
|
default:
|
|
pci_info(dev, "not setting up bridge for bus %04x:%02x\n",
|
|
pci_domain_nr(b), b->number);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
void pci_bus_assign_resources(const struct pci_bus *bus)
|
|
{
|
|
__pci_bus_assign_resources(bus, NULL, NULL);
|
|
}
|
|
EXPORT_SYMBOL(pci_bus_assign_resources);
|
|
|
|
static void pci_claim_device_resources(struct pci_dev *dev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < PCI_BRIDGE_RESOURCES; i++) {
|
|
struct resource *r = &dev->resource[i];
|
|
|
|
if (!r->flags || r->parent)
|
|
continue;
|
|
|
|
pci_claim_resource(dev, i);
|
|
}
|
|
}
|
|
|
|
static void pci_claim_bridge_resources(struct pci_dev *dev)
|
|
{
|
|
int i;
|
|
|
|
for (i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) {
|
|
struct resource *r = &dev->resource[i];
|
|
|
|
if (!r->flags || r->parent)
|
|
continue;
|
|
|
|
pci_claim_bridge_resource(dev, i);
|
|
}
|
|
}
|
|
|
|
static void pci_bus_allocate_dev_resources(struct pci_bus *b)
|
|
{
|
|
struct pci_dev *dev;
|
|
struct pci_bus *child;
|
|
|
|
list_for_each_entry(dev, &b->devices, bus_list) {
|
|
pci_claim_device_resources(dev);
|
|
|
|
child = dev->subordinate;
|
|
if (child)
|
|
pci_bus_allocate_dev_resources(child);
|
|
}
|
|
}
|
|
|
|
static void pci_bus_allocate_resources(struct pci_bus *b)
|
|
{
|
|
struct pci_bus *child;
|
|
|
|
/*
|
|
* Carry out a depth-first search on the PCI bus tree to allocate
|
|
* bridge apertures. Read the programmed bridge bases and
|
|
* recursively claim the respective bridge resources.
|
|
*/
|
|
if (b->self) {
|
|
pci_read_bridge_bases(b);
|
|
pci_claim_bridge_resources(b->self);
|
|
}
|
|
|
|
list_for_each_entry(child, &b->children, node)
|
|
pci_bus_allocate_resources(child);
|
|
}
|
|
|
|
void pci_bus_claim_resources(struct pci_bus *b)
|
|
{
|
|
pci_bus_allocate_resources(b);
|
|
pci_bus_allocate_dev_resources(b);
|
|
}
|
|
EXPORT_SYMBOL(pci_bus_claim_resources);
|
|
|
|
static void __pci_bridge_assign_resources(const struct pci_dev *bridge,
|
|
struct list_head *add_head,
|
|
struct list_head *fail_head)
|
|
{
|
|
struct pci_bus *b;
|
|
|
|
pdev_assign_resources_sorted((struct pci_dev *)bridge,
|
|
add_head, fail_head);
|
|
|
|
b = bridge->subordinate;
|
|
if (!b)
|
|
return;
|
|
|
|
__pci_bus_assign_resources(b, add_head, fail_head);
|
|
|
|
switch (bridge->class >> 8) {
|
|
case PCI_CLASS_BRIDGE_PCI:
|
|
pci_setup_bridge(b);
|
|
break;
|
|
|
|
case PCI_CLASS_BRIDGE_CARDBUS:
|
|
pci_setup_cardbus(b);
|
|
break;
|
|
|
|
default:
|
|
pci_info(bridge, "not setting up bridge for bus %04x:%02x\n",
|
|
pci_domain_nr(b), b->number);
|
|
break;
|
|
}
|
|
}
|
|
|
|
#define PCI_RES_TYPE_MASK \
|
|
(IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH |\
|
|
IORESOURCE_MEM_64)
|
|
|
|
static void pci_bridge_release_resources(struct pci_bus *bus,
|
|
unsigned long type)
|
|
{
|
|
struct pci_dev *dev = bus->self;
|
|
struct resource *r;
|
|
unsigned int old_flags;
|
|
struct resource *b_res;
|
|
int idx = 1;
|
|
|
|
b_res = &dev->resource[PCI_BRIDGE_RESOURCES];
|
|
|
|
/*
|
|
* 1. If IO port assignment fails, release bridge IO port.
|
|
* 2. If non pref MMIO assignment fails, release bridge nonpref MMIO.
|
|
* 3. If 64bit pref MMIO assignment fails, and bridge pref is 64bit,
|
|
* release bridge pref MMIO.
|
|
* 4. If pref MMIO assignment fails, and bridge pref is 32bit,
|
|
* release bridge pref MMIO.
|
|
* 5. If pref MMIO assignment fails, and bridge pref is not
|
|
* assigned, release bridge nonpref MMIO.
|
|
*/
|
|
if (type & IORESOURCE_IO)
|
|
idx = 0;
|
|
else if (!(type & IORESOURCE_PREFETCH))
|
|
idx = 1;
|
|
else if ((type & IORESOURCE_MEM_64) &&
|
|
(b_res[2].flags & IORESOURCE_MEM_64))
|
|
idx = 2;
|
|
else if (!(b_res[2].flags & IORESOURCE_MEM_64) &&
|
|
(b_res[2].flags & IORESOURCE_PREFETCH))
|
|
idx = 2;
|
|
else
|
|
idx = 1;
|
|
|
|
r = &b_res[idx];
|
|
|
|
if (!r->parent)
|
|
return;
|
|
|
|
/* If there are children, release them all */
|
|
release_child_resources(r);
|
|
if (!release_resource(r)) {
|
|
type = old_flags = r->flags & PCI_RES_TYPE_MASK;
|
|
pci_info(dev, "resource %d %pR released\n",
|
|
PCI_BRIDGE_RESOURCES + idx, r);
|
|
/* Keep the old size */
|
|
r->end = resource_size(r) - 1;
|
|
r->start = 0;
|
|
r->flags = 0;
|
|
|
|
/* Avoiding touch the one without PREF */
|
|
if (type & IORESOURCE_PREFETCH)
|
|
type = IORESOURCE_PREFETCH;
|
|
__pci_setup_bridge(bus, type);
|
|
/* For next child res under same bridge */
|
|
r->flags = old_flags;
|
|
}
|
|
}
|
|
|
|
enum release_type {
|
|
leaf_only,
|
|
whole_subtree,
|
|
};
|
|
|
|
/*
|
|
* Try to release PCI bridge resources from leaf bridge, so we can allocate
|
|
* a larger window later.
|
|
*/
|
|
static void pci_bus_release_bridge_resources(struct pci_bus *bus,
|
|
unsigned long type,
|
|
enum release_type rel_type)
|
|
{
|
|
struct pci_dev *dev;
|
|
bool is_leaf_bridge = true;
|
|
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
struct pci_bus *b = dev->subordinate;
|
|
if (!b)
|
|
continue;
|
|
|
|
is_leaf_bridge = false;
|
|
|
|
if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
|
|
continue;
|
|
|
|
if (rel_type == whole_subtree)
|
|
pci_bus_release_bridge_resources(b, type,
|
|
whole_subtree);
|
|
}
|
|
|
|
if (pci_is_root_bus(bus))
|
|
return;
|
|
|
|
if ((bus->self->class >> 8) != PCI_CLASS_BRIDGE_PCI)
|
|
return;
|
|
|
|
if ((rel_type == whole_subtree) || is_leaf_bridge)
|
|
pci_bridge_release_resources(bus, type);
|
|
}
|
|
|
|
static void pci_bus_dump_res(struct pci_bus *bus)
|
|
{
|
|
struct resource *res;
|
|
int i;
|
|
|
|
pci_bus_for_each_resource(bus, res, i) {
|
|
if (!res || !res->end || !res->flags)
|
|
continue;
|
|
|
|
dev_info(&bus->dev, "resource %d %pR\n", i, res);
|
|
}
|
|
}
|
|
|
|
static void pci_bus_dump_resources(struct pci_bus *bus)
|
|
{
|
|
struct pci_bus *b;
|
|
struct pci_dev *dev;
|
|
|
|
|
|
pci_bus_dump_res(bus);
|
|
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
b = dev->subordinate;
|
|
if (!b)
|
|
continue;
|
|
|
|
pci_bus_dump_resources(b);
|
|
}
|
|
}
|
|
|
|
static int pci_bus_get_depth(struct pci_bus *bus)
|
|
{
|
|
int depth = 0;
|
|
struct pci_bus *child_bus;
|
|
|
|
list_for_each_entry(child_bus, &bus->children, node) {
|
|
int ret;
|
|
|
|
ret = pci_bus_get_depth(child_bus);
|
|
if (ret + 1 > depth)
|
|
depth = ret + 1;
|
|
}
|
|
|
|
return depth;
|
|
}
|
|
|
|
/*
|
|
* -1: undefined, will auto detect later
|
|
* 0: disabled by user
|
|
* 1: disabled by auto detect
|
|
* 2: enabled by user
|
|
* 3: enabled by auto detect
|
|
*/
|
|
enum enable_type {
|
|
undefined = -1,
|
|
user_disabled,
|
|
auto_disabled,
|
|
user_enabled,
|
|
auto_enabled,
|
|
};
|
|
|
|
static enum enable_type pci_realloc_enable = undefined;
|
|
void __init pci_realloc_get_opt(char *str)
|
|
{
|
|
if (!strncmp(str, "off", 3))
|
|
pci_realloc_enable = user_disabled;
|
|
else if (!strncmp(str, "on", 2))
|
|
pci_realloc_enable = user_enabled;
|
|
}
|
|
static bool pci_realloc_enabled(enum enable_type enable)
|
|
{
|
|
return enable >= user_enabled;
|
|
}
|
|
|
|
#if defined(CONFIG_PCI_IOV) && defined(CONFIG_PCI_REALLOC_ENABLE_AUTO)
|
|
static int iov_resources_unassigned(struct pci_dev *dev, void *data)
|
|
{
|
|
int i;
|
|
bool *unassigned = data;
|
|
|
|
for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) {
|
|
struct resource *r = &dev->resource[i + PCI_IOV_RESOURCES];
|
|
struct pci_bus_region region;
|
|
|
|
/* Not assigned or rejected by kernel? */
|
|
if (!r->flags)
|
|
continue;
|
|
|
|
pcibios_resource_to_bus(dev->bus, ®ion, r);
|
|
if (!region.start) {
|
|
*unassigned = true;
|
|
return 1; /* Return early from pci_walk_bus() */
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static enum enable_type pci_realloc_detect(struct pci_bus *bus,
|
|
enum enable_type enable_local)
|
|
{
|
|
bool unassigned = false;
|
|
struct pci_host_bridge *host;
|
|
|
|
if (enable_local != undefined)
|
|
return enable_local;
|
|
|
|
host = pci_find_host_bridge(bus);
|
|
if (host->preserve_config)
|
|
return auto_disabled;
|
|
|
|
pci_walk_bus(bus, iov_resources_unassigned, &unassigned);
|
|
if (unassigned)
|
|
return auto_enabled;
|
|
|
|
return enable_local;
|
|
}
|
|
#else
|
|
static enum enable_type pci_realloc_detect(struct pci_bus *bus,
|
|
enum enable_type enable_local)
|
|
{
|
|
return enable_local;
|
|
}
|
|
#endif
|
|
|
|
static void adjust_bridge_window(struct pci_dev *bridge, struct resource *res,
|
|
struct list_head *add_list,
|
|
resource_size_t new_size)
|
|
{
|
|
resource_size_t add_size, size = resource_size(res);
|
|
|
|
if (res->parent)
|
|
return;
|
|
|
|
if (!new_size)
|
|
return;
|
|
|
|
if (new_size > size) {
|
|
add_size = new_size - size;
|
|
pci_dbg(bridge, "bridge window %pR extended by %pa\n", res,
|
|
&add_size);
|
|
} else if (new_size < size) {
|
|
add_size = size - new_size;
|
|
pci_dbg(bridge, "bridge window %pR shrunken by %pa\n", res,
|
|
&add_size);
|
|
} else {
|
|
return;
|
|
}
|
|
|
|
res->end = res->start + new_size - 1;
|
|
|
|
/* If the resource is part of the add_list, remove it now */
|
|
if (add_list)
|
|
remove_from_list(add_list, res);
|
|
}
|
|
|
|
static void remove_dev_resource(struct resource *avail, struct pci_dev *dev,
|
|
struct resource *res)
|
|
{
|
|
resource_size_t size, align, tmp;
|
|
|
|
size = resource_size(res);
|
|
if (!size)
|
|
return;
|
|
|
|
align = pci_resource_alignment(dev, res);
|
|
align = align ? ALIGN(avail->start, align) - avail->start : 0;
|
|
tmp = align + size;
|
|
avail->start = min(avail->start + tmp, avail->end + 1);
|
|
}
|
|
|
|
static void remove_dev_resources(struct pci_dev *dev, struct resource *io,
|
|
struct resource *mmio,
|
|
struct resource *mmio_pref)
|
|
{
|
|
struct resource *res;
|
|
|
|
pci_dev_for_each_resource(dev, res) {
|
|
if (resource_type(res) == IORESOURCE_IO) {
|
|
remove_dev_resource(io, dev, res);
|
|
} else if (resource_type(res) == IORESOURCE_MEM) {
|
|
|
|
/*
|
|
* Make sure prefetchable memory is reduced from
|
|
* the correct resource. Specifically we put 32-bit
|
|
* prefetchable memory in non-prefetchable window
|
|
* if there is an 64-bit prefetchable window.
|
|
*
|
|
* See comments in __pci_bus_size_bridges() for
|
|
* more information.
|
|
*/
|
|
if ((res->flags & IORESOURCE_PREFETCH) &&
|
|
((res->flags & IORESOURCE_MEM_64) ==
|
|
(mmio_pref->flags & IORESOURCE_MEM_64)))
|
|
remove_dev_resource(mmio_pref, dev, res);
|
|
else
|
|
remove_dev_resource(mmio, dev, res);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* io, mmio and mmio_pref contain the total amount of bridge window space
|
|
* available. This includes the minimal space needed to cover all the
|
|
* existing devices on the bus and the possible extra space that can be
|
|
* shared with the bridges.
|
|
*/
|
|
static void pci_bus_distribute_available_resources(struct pci_bus *bus,
|
|
struct list_head *add_list,
|
|
struct resource io,
|
|
struct resource mmio,
|
|
struct resource mmio_pref)
|
|
{
|
|
unsigned int normal_bridges = 0, hotplug_bridges = 0;
|
|
struct resource *io_res, *mmio_res, *mmio_pref_res;
|
|
struct pci_dev *dev, *bridge = bus->self;
|
|
resource_size_t io_per_b, mmio_per_b, mmio_pref_per_b, align;
|
|
|
|
io_res = &bridge->resource[PCI_BRIDGE_IO_WINDOW];
|
|
mmio_res = &bridge->resource[PCI_BRIDGE_MEM_WINDOW];
|
|
mmio_pref_res = &bridge->resource[PCI_BRIDGE_PREF_MEM_WINDOW];
|
|
|
|
/*
|
|
* The alignment of this bridge is yet to be considered, hence it must
|
|
* be done now before extending its bridge window.
|
|
*/
|
|
align = pci_resource_alignment(bridge, io_res);
|
|
if (!io_res->parent && align)
|
|
io.start = min(ALIGN(io.start, align), io.end + 1);
|
|
|
|
align = pci_resource_alignment(bridge, mmio_res);
|
|
if (!mmio_res->parent && align)
|
|
mmio.start = min(ALIGN(mmio.start, align), mmio.end + 1);
|
|
|
|
align = pci_resource_alignment(bridge, mmio_pref_res);
|
|
if (!mmio_pref_res->parent && align)
|
|
mmio_pref.start = min(ALIGN(mmio_pref.start, align),
|
|
mmio_pref.end + 1);
|
|
|
|
/*
|
|
* Now that we have adjusted for alignment, update the bridge window
|
|
* resources to fill as much remaining resource space as possible.
|
|
*/
|
|
adjust_bridge_window(bridge, io_res, add_list, resource_size(&io));
|
|
adjust_bridge_window(bridge, mmio_res, add_list, resource_size(&mmio));
|
|
adjust_bridge_window(bridge, mmio_pref_res, add_list,
|
|
resource_size(&mmio_pref));
|
|
|
|
/*
|
|
* Calculate how many hotplug bridges and normal bridges there
|
|
* are on this bus. We will distribute the additional available
|
|
* resources between hotplug bridges.
|
|
*/
|
|
for_each_pci_bridge(dev, bus) {
|
|
if (dev->is_hotplug_bridge)
|
|
hotplug_bridges++;
|
|
else
|
|
normal_bridges++;
|
|
}
|
|
|
|
if (!(hotplug_bridges + normal_bridges))
|
|
return;
|
|
|
|
/*
|
|
* Calculate the amount of space we can forward from "bus" to any
|
|
* downstream buses, i.e., the space left over after assigning the
|
|
* BARs and windows on "bus".
|
|
*/
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
if (!dev->is_virtfn)
|
|
remove_dev_resources(dev, &io, &mmio, &mmio_pref);
|
|
}
|
|
|
|
/*
|
|
* If there is at least one hotplug bridge on this bus it gets all
|
|
* the extra resource space that was left after the reductions
|
|
* above.
|
|
*
|
|
* If there are no hotplug bridges the extra resource space is
|
|
* split between non-hotplug bridges. This is to allow possible
|
|
* hotplug bridges below them to get the extra space as well.
|
|
*/
|
|
if (hotplug_bridges) {
|
|
io_per_b = div64_ul(resource_size(&io), hotplug_bridges);
|
|
mmio_per_b = div64_ul(resource_size(&mmio), hotplug_bridges);
|
|
mmio_pref_per_b = div64_ul(resource_size(&mmio_pref),
|
|
hotplug_bridges);
|
|
} else {
|
|
io_per_b = div64_ul(resource_size(&io), normal_bridges);
|
|
mmio_per_b = div64_ul(resource_size(&mmio), normal_bridges);
|
|
mmio_pref_per_b = div64_ul(resource_size(&mmio_pref),
|
|
normal_bridges);
|
|
}
|
|
|
|
for_each_pci_bridge(dev, bus) {
|
|
struct resource *res;
|
|
struct pci_bus *b;
|
|
|
|
b = dev->subordinate;
|
|
if (!b)
|
|
continue;
|
|
if (hotplug_bridges && !dev->is_hotplug_bridge)
|
|
continue;
|
|
|
|
res = &dev->resource[PCI_BRIDGE_IO_WINDOW];
|
|
|
|
/*
|
|
* Make sure the split resource space is properly aligned
|
|
* for bridge windows (align it down to avoid going above
|
|
* what is available).
|
|
*/
|
|
align = pci_resource_alignment(dev, res);
|
|
io.end = align ? io.start + ALIGN_DOWN(io_per_b, align) - 1
|
|
: io.start + io_per_b - 1;
|
|
|
|
/*
|
|
* The x_per_b holds the extra resource space that can be
|
|
* added for each bridge but there is the minimal already
|
|
* reserved as well so adjust x.start down accordingly to
|
|
* cover the whole space.
|
|
*/
|
|
io.start -= resource_size(res);
|
|
|
|
res = &dev->resource[PCI_BRIDGE_MEM_WINDOW];
|
|
align = pci_resource_alignment(dev, res);
|
|
mmio.end = align ? mmio.start + ALIGN_DOWN(mmio_per_b, align) - 1
|
|
: mmio.start + mmio_per_b - 1;
|
|
mmio.start -= resource_size(res);
|
|
|
|
res = &dev->resource[PCI_BRIDGE_PREF_MEM_WINDOW];
|
|
align = pci_resource_alignment(dev, res);
|
|
mmio_pref.end = align ? mmio_pref.start +
|
|
ALIGN_DOWN(mmio_pref_per_b, align) - 1
|
|
: mmio_pref.start + mmio_pref_per_b - 1;
|
|
mmio_pref.start -= resource_size(res);
|
|
|
|
pci_bus_distribute_available_resources(b, add_list, io, mmio,
|
|
mmio_pref);
|
|
|
|
io.start += io.end + 1;
|
|
mmio.start += mmio.end + 1;
|
|
mmio_pref.start += mmio_pref.end + 1;
|
|
}
|
|
}
|
|
|
|
static void pci_bridge_distribute_available_resources(struct pci_dev *bridge,
|
|
struct list_head *add_list)
|
|
{
|
|
struct resource available_io, available_mmio, available_mmio_pref;
|
|
|
|
if (!bridge->is_hotplug_bridge)
|
|
return;
|
|
|
|
pci_dbg(bridge, "distributing available resources\n");
|
|
|
|
/* Take the initial extra resources from the hotplug port */
|
|
available_io = bridge->resource[PCI_BRIDGE_IO_WINDOW];
|
|
available_mmio = bridge->resource[PCI_BRIDGE_MEM_WINDOW];
|
|
available_mmio_pref = bridge->resource[PCI_BRIDGE_PREF_MEM_WINDOW];
|
|
|
|
pci_bus_distribute_available_resources(bridge->subordinate,
|
|
add_list, available_io,
|
|
available_mmio,
|
|
available_mmio_pref);
|
|
}
|
|
|
|
static bool pci_bridge_resources_not_assigned(struct pci_dev *dev)
|
|
{
|
|
const struct resource *r;
|
|
|
|
/*
|
|
* If the child device's resources are not yet assigned it means we
|
|
* are configuring them (not the boot firmware), so we should be
|
|
* able to extend the upstream bridge resources in the same way we
|
|
* do with the normal hotplug case.
|
|
*/
|
|
r = &dev->resource[PCI_BRIDGE_IO_WINDOW];
|
|
if (r->flags && !(r->flags & IORESOURCE_STARTALIGN))
|
|
return false;
|
|
r = &dev->resource[PCI_BRIDGE_MEM_WINDOW];
|
|
if (r->flags && !(r->flags & IORESOURCE_STARTALIGN))
|
|
return false;
|
|
r = &dev->resource[PCI_BRIDGE_PREF_MEM_WINDOW];
|
|
if (r->flags && !(r->flags & IORESOURCE_STARTALIGN))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static void
|
|
pci_root_bus_distribute_available_resources(struct pci_bus *bus,
|
|
struct list_head *add_list)
|
|
{
|
|
struct pci_dev *dev, *bridge = bus->self;
|
|
|
|
for_each_pci_bridge(dev, bus) {
|
|
struct pci_bus *b;
|
|
|
|
b = dev->subordinate;
|
|
if (!b)
|
|
continue;
|
|
|
|
/*
|
|
* Need to check "bridge" here too because it is NULL
|
|
* in case of root bus.
|
|
*/
|
|
if (bridge && pci_bridge_resources_not_assigned(dev))
|
|
pci_bridge_distribute_available_resources(bridge,
|
|
add_list);
|
|
else
|
|
pci_root_bus_distribute_available_resources(b, add_list);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* First try will not touch PCI bridge res.
|
|
* Second and later try will clear small leaf bridge res.
|
|
* Will stop till to the max depth if can not find good one.
|
|
*/
|
|
void pci_assign_unassigned_root_bus_resources(struct pci_bus *bus)
|
|
{
|
|
LIST_HEAD(realloc_head);
|
|
/* List of resources that want additional resources */
|
|
struct list_head *add_list = NULL;
|
|
int tried_times = 0;
|
|
enum release_type rel_type = leaf_only;
|
|
LIST_HEAD(fail_head);
|
|
struct pci_dev_resource *fail_res;
|
|
int pci_try_num = 1;
|
|
enum enable_type enable_local;
|
|
|
|
/* Don't realloc if asked to do so */
|
|
enable_local = pci_realloc_detect(bus, pci_realloc_enable);
|
|
if (pci_realloc_enabled(enable_local)) {
|
|
int max_depth = pci_bus_get_depth(bus);
|
|
|
|
pci_try_num = max_depth + 1;
|
|
dev_info(&bus->dev, "max bus depth: %d pci_try_num: %d\n",
|
|
max_depth, pci_try_num);
|
|
}
|
|
|
|
again:
|
|
/*
|
|
* Last try will use add_list, otherwise will try good to have as must
|
|
* have, so can realloc parent bridge resource
|
|
*/
|
|
if (tried_times + 1 == pci_try_num)
|
|
add_list = &realloc_head;
|
|
/*
|
|
* Depth first, calculate sizes and alignments of all subordinate buses.
|
|
*/
|
|
__pci_bus_size_bridges(bus, add_list);
|
|
|
|
pci_root_bus_distribute_available_resources(bus, add_list);
|
|
|
|
/* Depth last, allocate resources and update the hardware. */
|
|
__pci_bus_assign_resources(bus, add_list, &fail_head);
|
|
if (add_list)
|
|
BUG_ON(!list_empty(add_list));
|
|
tried_times++;
|
|
|
|
/* Any device complain? */
|
|
if (list_empty(&fail_head))
|
|
goto dump;
|
|
|
|
if (tried_times >= pci_try_num) {
|
|
if (enable_local == undefined)
|
|
dev_info(&bus->dev, "Some PCI device resources are unassigned, try booting with pci=realloc\n");
|
|
else if (enable_local == auto_enabled)
|
|
dev_info(&bus->dev, "Automatically enabled pci realloc, if you have problem, try booting with pci=realloc=off\n");
|
|
|
|
free_list(&fail_head);
|
|
goto dump;
|
|
}
|
|
|
|
dev_info(&bus->dev, "No. %d try to assign unassigned res\n",
|
|
tried_times + 1);
|
|
|
|
/* Third times and later will not check if it is leaf */
|
|
if ((tried_times + 1) > 2)
|
|
rel_type = whole_subtree;
|
|
|
|
/*
|
|
* Try to release leaf bridge's resources that doesn't fit resource of
|
|
* child device under that bridge.
|
|
*/
|
|
list_for_each_entry(fail_res, &fail_head, list)
|
|
pci_bus_release_bridge_resources(fail_res->dev->bus,
|
|
fail_res->flags & PCI_RES_TYPE_MASK,
|
|
rel_type);
|
|
|
|
/* Restore size and flags */
|
|
list_for_each_entry(fail_res, &fail_head, list) {
|
|
struct resource *res = fail_res->res;
|
|
int idx;
|
|
|
|
res->start = fail_res->start;
|
|
res->end = fail_res->end;
|
|
res->flags = fail_res->flags;
|
|
|
|
if (pci_is_bridge(fail_res->dev)) {
|
|
idx = res - &fail_res->dev->resource[0];
|
|
if (idx >= PCI_BRIDGE_RESOURCES &&
|
|
idx <= PCI_BRIDGE_RESOURCE_END)
|
|
res->flags = 0;
|
|
}
|
|
}
|
|
free_list(&fail_head);
|
|
|
|
goto again;
|
|
|
|
dump:
|
|
/* Dump the resource on buses */
|
|
pci_bus_dump_resources(bus);
|
|
}
|
|
|
|
void pci_assign_unassigned_resources(void)
|
|
{
|
|
struct pci_bus *root_bus;
|
|
|
|
list_for_each_entry(root_bus, &pci_root_buses, node) {
|
|
pci_assign_unassigned_root_bus_resources(root_bus);
|
|
|
|
/* Make sure the root bridge has a companion ACPI device */
|
|
if (ACPI_HANDLE(root_bus->bridge))
|
|
acpi_ioapic_add(ACPI_HANDLE(root_bus->bridge));
|
|
}
|
|
}
|
|
|
|
void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
|
|
{
|
|
struct pci_bus *parent = bridge->subordinate;
|
|
/* List of resources that want additional resources */
|
|
LIST_HEAD(add_list);
|
|
|
|
int tried_times = 0;
|
|
LIST_HEAD(fail_head);
|
|
struct pci_dev_resource *fail_res;
|
|
int retval;
|
|
|
|
again:
|
|
__pci_bus_size_bridges(parent, &add_list);
|
|
|
|
/*
|
|
* Distribute remaining resources (if any) equally between hotplug
|
|
* bridges below. This makes it possible to extend the hierarchy
|
|
* later without running out of resources.
|
|
*/
|
|
pci_bridge_distribute_available_resources(bridge, &add_list);
|
|
|
|
__pci_bridge_assign_resources(bridge, &add_list, &fail_head);
|
|
BUG_ON(!list_empty(&add_list));
|
|
tried_times++;
|
|
|
|
if (list_empty(&fail_head))
|
|
goto enable_all;
|
|
|
|
if (tried_times >= 2) {
|
|
/* Still fail, don't need to try more */
|
|
free_list(&fail_head);
|
|
goto enable_all;
|
|
}
|
|
|
|
printk(KERN_DEBUG "PCI: No. %d try to assign unassigned res\n",
|
|
tried_times + 1);
|
|
|
|
/*
|
|
* Try to release leaf bridge's resources that aren't big enough
|
|
* to contain child device resources.
|
|
*/
|
|
list_for_each_entry(fail_res, &fail_head, list)
|
|
pci_bus_release_bridge_resources(fail_res->dev->bus,
|
|
fail_res->flags & PCI_RES_TYPE_MASK,
|
|
whole_subtree);
|
|
|
|
/* Restore size and flags */
|
|
list_for_each_entry(fail_res, &fail_head, list) {
|
|
struct resource *res = fail_res->res;
|
|
int idx;
|
|
|
|
res->start = fail_res->start;
|
|
res->end = fail_res->end;
|
|
res->flags = fail_res->flags;
|
|
|
|
if (pci_is_bridge(fail_res->dev)) {
|
|
idx = res - &fail_res->dev->resource[0];
|
|
if (idx >= PCI_BRIDGE_RESOURCES &&
|
|
idx <= PCI_BRIDGE_RESOURCE_END)
|
|
res->flags = 0;
|
|
}
|
|
}
|
|
free_list(&fail_head);
|
|
|
|
goto again;
|
|
|
|
enable_all:
|
|
retval = pci_reenable_device(bridge);
|
|
if (retval)
|
|
pci_err(bridge, "Error reenabling bridge (%d)\n", retval);
|
|
pci_set_master(bridge);
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_assign_unassigned_bridge_resources);
|
|
|
|
int pci_reassign_bridge_resources(struct pci_dev *bridge, unsigned long type)
|
|
{
|
|
struct pci_dev_resource *dev_res;
|
|
struct pci_dev *next;
|
|
LIST_HEAD(saved);
|
|
LIST_HEAD(added);
|
|
LIST_HEAD(failed);
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
down_read(&pci_bus_sem);
|
|
|
|
/* Walk to the root hub, releasing bridge BARs when possible */
|
|
next = bridge;
|
|
do {
|
|
bridge = next;
|
|
for (i = PCI_BRIDGE_RESOURCES; i < PCI_BRIDGE_RESOURCE_END;
|
|
i++) {
|
|
struct resource *res = &bridge->resource[i];
|
|
const char *res_name = pci_resource_name(bridge, i);
|
|
|
|
if ((res->flags ^ type) & PCI_RES_TYPE_MASK)
|
|
continue;
|
|
|
|
/* Ignore BARs which are still in use */
|
|
if (res->child)
|
|
continue;
|
|
|
|
ret = add_to_list(&saved, bridge, res, 0, 0);
|
|
if (ret)
|
|
goto cleanup;
|
|
|
|
pci_info(bridge, "%s %pR: releasing\n", res_name, res);
|
|
|
|
if (res->parent)
|
|
release_resource(res);
|
|
res->start = 0;
|
|
res->end = 0;
|
|
break;
|
|
}
|
|
if (i == PCI_BRIDGE_RESOURCE_END)
|
|
break;
|
|
|
|
next = bridge->bus ? bridge->bus->self : NULL;
|
|
} while (next);
|
|
|
|
if (list_empty(&saved)) {
|
|
up_read(&pci_bus_sem);
|
|
return -ENOENT;
|
|
}
|
|
|
|
__pci_bus_size_bridges(bridge->subordinate, &added);
|
|
__pci_bridge_assign_resources(bridge, &added, &failed);
|
|
BUG_ON(!list_empty(&added));
|
|
|
|
if (!list_empty(&failed)) {
|
|
ret = -ENOSPC;
|
|
goto cleanup;
|
|
}
|
|
|
|
list_for_each_entry(dev_res, &saved, list) {
|
|
/* Skip the bridge we just assigned resources for */
|
|
if (bridge == dev_res->dev)
|
|
continue;
|
|
|
|
bridge = dev_res->dev;
|
|
pci_setup_bridge(bridge->subordinate);
|
|
}
|
|
|
|
free_list(&saved);
|
|
up_read(&pci_bus_sem);
|
|
return 0;
|
|
|
|
cleanup:
|
|
/* Restore size and flags */
|
|
list_for_each_entry(dev_res, &failed, list) {
|
|
struct resource *res = dev_res->res;
|
|
|
|
res->start = dev_res->start;
|
|
res->end = dev_res->end;
|
|
res->flags = dev_res->flags;
|
|
}
|
|
free_list(&failed);
|
|
|
|
/* Revert to the old configuration */
|
|
list_for_each_entry(dev_res, &saved, list) {
|
|
struct resource *res = dev_res->res;
|
|
|
|
bridge = dev_res->dev;
|
|
i = res - bridge->resource;
|
|
|
|
res->start = dev_res->start;
|
|
res->end = dev_res->end;
|
|
res->flags = dev_res->flags;
|
|
|
|
pci_claim_resource(bridge, i);
|
|
pci_setup_bridge(bridge->subordinate);
|
|
}
|
|
free_list(&saved);
|
|
up_read(&pci_bus_sem);
|
|
|
|
return ret;
|
|
}
|
|
|
|
void pci_assign_unassigned_bus_resources(struct pci_bus *bus)
|
|
{
|
|
struct pci_dev *dev;
|
|
/* List of resources that want additional resources */
|
|
LIST_HEAD(add_list);
|
|
|
|
down_read(&pci_bus_sem);
|
|
for_each_pci_bridge(dev, bus)
|
|
if (pci_has_subordinate(dev))
|
|
__pci_bus_size_bridges(dev->subordinate, &add_list);
|
|
up_read(&pci_bus_sem);
|
|
__pci_bus_assign_resources(bus, &add_list, NULL);
|
|
BUG_ON(!list_empty(&add_list));
|
|
}
|
|
EXPORT_SYMBOL_GPL(pci_assign_unassigned_bus_resources);
|