mirror of
https://github.com/torvalds/linux.git
synced 2024-11-15 00:21:59 +00:00
06c71282a9
PLL was not being enabled when it was not bypassed. This patch enables the PLL when it is used. Additionally, it disables the PLL when it is bypassed. Without this patch, the audio on TI DM646x EVM and DM355 EVM does not work properly. The bit clocks and the frame sync signals from the codec are not correct and hence the playback/record are faster than usual for most sample rates. The reason for this was that the PLL was not enabled when it was not bypassed. Tested on DM6467 EVM, playback tested on DM355 EVM. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
1464 lines
47 KiB
C
1464 lines
47 KiB
C
/*
|
|
* ALSA SoC TLV320AIC3X codec driver
|
|
*
|
|
* Author: Vladimir Barinov, <vbarinov@embeddedalley.com>
|
|
* Copyright: (C) 2007 MontaVista Software, Inc., <source@mvista.com>
|
|
*
|
|
* Based on sound/soc/codecs/wm8753.c by Liam Girdwood
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Notes:
|
|
* The AIC3X is a driver for a low power stereo audio
|
|
* codecs aic31, aic32, aic33.
|
|
*
|
|
* It supports full aic33 codec functionality.
|
|
* The compatibility with aic32, aic31 is as follows:
|
|
* aic32 | aic31
|
|
* ---------------------------------------
|
|
* MONO_LOUT -> N/A | MONO_LOUT -> N/A
|
|
* | IN1L -> LINE1L
|
|
* | IN1R -> LINE1R
|
|
* | IN2L -> LINE2L
|
|
* | IN2R -> LINE2R
|
|
* | MIC3L/R -> N/A
|
|
* truncated internal functionality in
|
|
* accordance with documentation
|
|
* ---------------------------------------
|
|
*
|
|
* Hence the machine layer should disable unsupported inputs/outputs by
|
|
* snd_soc_dapm_disable_pin(codec, "MONO_LOUT"), etc.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/platform_device.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/soc-dapm.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/tlv.h>
|
|
|
|
#include "tlv320aic3x.h"
|
|
|
|
#define AIC3X_VERSION "0.2"
|
|
|
|
/* codec private data */
|
|
struct aic3x_priv {
|
|
unsigned int sysclk;
|
|
int master;
|
|
};
|
|
|
|
/*
|
|
* AIC3X register cache
|
|
* We can't read the AIC3X register space when we are
|
|
* using 2 wire for device control, so we cache them instead.
|
|
* There is no point in caching the reset register
|
|
*/
|
|
static const u8 aic3x_reg[AIC3X_CACHEREGNUM] = {
|
|
0x00, 0x00, 0x00, 0x10, /* 0 */
|
|
0x04, 0x00, 0x00, 0x00, /* 4 */
|
|
0x00, 0x00, 0x00, 0x01, /* 8 */
|
|
0x00, 0x00, 0x00, 0x80, /* 12 */
|
|
0x80, 0xff, 0xff, 0x78, /* 16 */
|
|
0x78, 0x78, 0x78, 0x78, /* 20 */
|
|
0x78, 0x00, 0x00, 0xfe, /* 24 */
|
|
0x00, 0x00, 0xfe, 0x00, /* 28 */
|
|
0x18, 0x18, 0x00, 0x00, /* 32 */
|
|
0x00, 0x00, 0x00, 0x00, /* 36 */
|
|
0x00, 0x00, 0x00, 0x80, /* 40 */
|
|
0x80, 0x00, 0x00, 0x00, /* 44 */
|
|
0x00, 0x00, 0x00, 0x04, /* 48 */
|
|
0x00, 0x00, 0x00, 0x00, /* 52 */
|
|
0x00, 0x00, 0x04, 0x00, /* 56 */
|
|
0x00, 0x00, 0x00, 0x00, /* 60 */
|
|
0x00, 0x04, 0x00, 0x00, /* 64 */
|
|
0x00, 0x00, 0x00, 0x00, /* 68 */
|
|
0x04, 0x00, 0x00, 0x00, /* 72 */
|
|
0x00, 0x00, 0x00, 0x00, /* 76 */
|
|
0x00, 0x00, 0x00, 0x00, /* 80 */
|
|
0x00, 0x00, 0x00, 0x00, /* 84 */
|
|
0x00, 0x00, 0x00, 0x00, /* 88 */
|
|
0x00, 0x00, 0x00, 0x00, /* 92 */
|
|
0x00, 0x00, 0x00, 0x00, /* 96 */
|
|
0x00, 0x00, 0x02, /* 100 */
|
|
};
|
|
|
|
/*
|
|
* read aic3x register cache
|
|
*/
|
|
static inline unsigned int aic3x_read_reg_cache(struct snd_soc_codec *codec,
|
|
unsigned int reg)
|
|
{
|
|
u8 *cache = codec->reg_cache;
|
|
if (reg >= AIC3X_CACHEREGNUM)
|
|
return -1;
|
|
return cache[reg];
|
|
}
|
|
|
|
/*
|
|
* write aic3x register cache
|
|
*/
|
|
static inline void aic3x_write_reg_cache(struct snd_soc_codec *codec,
|
|
u8 reg, u8 value)
|
|
{
|
|
u8 *cache = codec->reg_cache;
|
|
if (reg >= AIC3X_CACHEREGNUM)
|
|
return;
|
|
cache[reg] = value;
|
|
}
|
|
|
|
/*
|
|
* write to the aic3x register space
|
|
*/
|
|
static int aic3x_write(struct snd_soc_codec *codec, unsigned int reg,
|
|
unsigned int value)
|
|
{
|
|
u8 data[2];
|
|
|
|
/* data is
|
|
* D15..D8 aic3x register offset
|
|
* D7...D0 register data
|
|
*/
|
|
data[0] = reg & 0xff;
|
|
data[1] = value & 0xff;
|
|
|
|
aic3x_write_reg_cache(codec, data[0], data[1]);
|
|
if (codec->hw_write(codec->control_data, data, 2) == 2)
|
|
return 0;
|
|
else
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* read from the aic3x register space
|
|
*/
|
|
static int aic3x_read(struct snd_soc_codec *codec, unsigned int reg,
|
|
u8 *value)
|
|
{
|
|
*value = reg & 0xff;
|
|
if (codec->hw_read(codec->control_data, value, 1) != 1)
|
|
return -EIO;
|
|
|
|
aic3x_write_reg_cache(codec, reg, *value);
|
|
return 0;
|
|
}
|
|
|
|
#define SOC_DAPM_SINGLE_AIC3X(xname, reg, shift, mask, invert) \
|
|
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
|
|
.info = snd_soc_info_volsw, \
|
|
.get = snd_soc_dapm_get_volsw, .put = snd_soc_dapm_put_volsw_aic3x, \
|
|
.private_value = SOC_SINGLE_VALUE(reg, shift, mask, invert) }
|
|
|
|
/*
|
|
* All input lines are connected when !0xf and disconnected with 0xf bit field,
|
|
* so we have to use specific dapm_put call for input mixer
|
|
*/
|
|
static int snd_soc_dapm_put_volsw_aic3x(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
|
|
struct soc_mixer_control *mc =
|
|
(struct soc_mixer_control *)kcontrol->private_value;
|
|
unsigned int reg = mc->reg;
|
|
unsigned int shift = mc->shift;
|
|
int max = mc->max;
|
|
unsigned int mask = (1 << fls(max)) - 1;
|
|
unsigned int invert = mc->invert;
|
|
unsigned short val, val_mask;
|
|
int ret;
|
|
struct snd_soc_dapm_path *path;
|
|
int found = 0;
|
|
|
|
val = (ucontrol->value.integer.value[0] & mask);
|
|
|
|
mask = 0xf;
|
|
if (val)
|
|
val = mask;
|
|
|
|
if (invert)
|
|
val = mask - val;
|
|
val_mask = mask << shift;
|
|
val = val << shift;
|
|
|
|
mutex_lock(&widget->codec->mutex);
|
|
|
|
if (snd_soc_test_bits(widget->codec, reg, val_mask, val)) {
|
|
/* find dapm widget path assoc with kcontrol */
|
|
list_for_each_entry(path, &widget->codec->dapm_paths, list) {
|
|
if (path->kcontrol != kcontrol)
|
|
continue;
|
|
|
|
/* found, now check type */
|
|
found = 1;
|
|
if (val)
|
|
/* new connection */
|
|
path->connect = invert ? 0 : 1;
|
|
else
|
|
/* old connection must be powered down */
|
|
path->connect = invert ? 1 : 0;
|
|
break;
|
|
}
|
|
|
|
if (found)
|
|
snd_soc_dapm_sync(widget->codec);
|
|
}
|
|
|
|
ret = snd_soc_update_bits(widget->codec, reg, val_mask, val);
|
|
|
|
mutex_unlock(&widget->codec->mutex);
|
|
return ret;
|
|
}
|
|
|
|
static const char *aic3x_left_dac_mux[] = { "DAC_L1", "DAC_L3", "DAC_L2" };
|
|
static const char *aic3x_right_dac_mux[] = { "DAC_R1", "DAC_R3", "DAC_R2" };
|
|
static const char *aic3x_left_hpcom_mux[] =
|
|
{ "differential of HPLOUT", "constant VCM", "single-ended" };
|
|
static const char *aic3x_right_hpcom_mux[] =
|
|
{ "differential of HPROUT", "constant VCM", "single-ended",
|
|
"differential of HPLCOM", "external feedback" };
|
|
static const char *aic3x_linein_mode_mux[] = { "single-ended", "differential" };
|
|
static const char *aic3x_adc_hpf[] =
|
|
{ "Disabled", "0.0045xFs", "0.0125xFs", "0.025xFs" };
|
|
|
|
#define LDAC_ENUM 0
|
|
#define RDAC_ENUM 1
|
|
#define LHPCOM_ENUM 2
|
|
#define RHPCOM_ENUM 3
|
|
#define LINE1L_ENUM 4
|
|
#define LINE1R_ENUM 5
|
|
#define LINE2L_ENUM 6
|
|
#define LINE2R_ENUM 7
|
|
#define ADC_HPF_ENUM 8
|
|
|
|
static const struct soc_enum aic3x_enum[] = {
|
|
SOC_ENUM_SINGLE(DAC_LINE_MUX, 6, 3, aic3x_left_dac_mux),
|
|
SOC_ENUM_SINGLE(DAC_LINE_MUX, 4, 3, aic3x_right_dac_mux),
|
|
SOC_ENUM_SINGLE(HPLCOM_CFG, 4, 3, aic3x_left_hpcom_mux),
|
|
SOC_ENUM_SINGLE(HPRCOM_CFG, 3, 5, aic3x_right_hpcom_mux),
|
|
SOC_ENUM_SINGLE(LINE1L_2_LADC_CTRL, 7, 2, aic3x_linein_mode_mux),
|
|
SOC_ENUM_SINGLE(LINE1R_2_RADC_CTRL, 7, 2, aic3x_linein_mode_mux),
|
|
SOC_ENUM_SINGLE(LINE2L_2_LADC_CTRL, 7, 2, aic3x_linein_mode_mux),
|
|
SOC_ENUM_SINGLE(LINE2R_2_RADC_CTRL, 7, 2, aic3x_linein_mode_mux),
|
|
SOC_ENUM_DOUBLE(AIC3X_CODEC_DFILT_CTRL, 6, 4, 4, aic3x_adc_hpf),
|
|
};
|
|
|
|
/*
|
|
* DAC digital volumes. From -63.5 to 0 dB in 0.5 dB steps
|
|
*/
|
|
static DECLARE_TLV_DB_SCALE(dac_tlv, -6350, 50, 0);
|
|
/* ADC PGA gain volumes. From 0 to 59.5 dB in 0.5 dB steps */
|
|
static DECLARE_TLV_DB_SCALE(adc_tlv, 0, 50, 0);
|
|
/*
|
|
* Output stage volumes. From -78.3 to 0 dB. Muted below -78.3 dB.
|
|
* Step size is approximately 0.5 dB over most of the scale but increasing
|
|
* near the very low levels.
|
|
* Define dB scale so that it is mostly correct for range about -55 to 0 dB
|
|
* but having increasing dB difference below that (and where it doesn't count
|
|
* so much). This setting shows -50 dB (actual is -50.3 dB) for register
|
|
* value 100 and -58.5 dB (actual is -78.3 dB) for register value 117.
|
|
*/
|
|
static DECLARE_TLV_DB_SCALE(output_stage_tlv, -5900, 50, 1);
|
|
|
|
static const struct snd_kcontrol_new aic3x_snd_controls[] = {
|
|
/* Output */
|
|
SOC_DOUBLE_R_TLV("PCM Playback Volume",
|
|
LDAC_VOL, RDAC_VOL, 0, 0x7f, 1, dac_tlv),
|
|
|
|
SOC_DOUBLE_R_TLV("Line DAC Playback Volume",
|
|
DACL1_2_LLOPM_VOL, DACR1_2_RLOPM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
SOC_SINGLE("LineL Playback Switch", LLOPM_CTRL, 3, 0x01, 0),
|
|
SOC_SINGLE("LineR Playback Switch", RLOPM_CTRL, 3, 0x01, 0),
|
|
SOC_DOUBLE_R_TLV("LineL DAC Playback Volume",
|
|
DACL1_2_LLOPM_VOL, DACR1_2_LLOPM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
SOC_SINGLE_TLV("LineL Left PGA Bypass Playback Volume",
|
|
PGAL_2_LLOPM_VOL, 0, 118, 1, output_stage_tlv),
|
|
SOC_SINGLE_TLV("LineR Right PGA Bypass Playback Volume",
|
|
PGAR_2_RLOPM_VOL, 0, 118, 1, output_stage_tlv),
|
|
SOC_DOUBLE_R_TLV("LineL Line2 Bypass Playback Volume",
|
|
LINE2L_2_LLOPM_VOL, LINE2R_2_LLOPM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
SOC_DOUBLE_R_TLV("LineR Line2 Bypass Playback Volume",
|
|
LINE2L_2_RLOPM_VOL, LINE2R_2_RLOPM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
|
|
SOC_DOUBLE_R_TLV("Mono DAC Playback Volume",
|
|
DACL1_2_MONOLOPM_VOL, DACR1_2_MONOLOPM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
SOC_SINGLE("Mono DAC Playback Switch", MONOLOPM_CTRL, 3, 0x01, 0),
|
|
SOC_DOUBLE_R_TLV("Mono PGA Bypass Playback Volume",
|
|
PGAL_2_MONOLOPM_VOL, PGAR_2_MONOLOPM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
SOC_DOUBLE_R_TLV("Mono Line2 Bypass Playback Volume",
|
|
LINE2L_2_MONOLOPM_VOL, LINE2R_2_MONOLOPM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
|
|
SOC_DOUBLE_R_TLV("HP DAC Playback Volume",
|
|
DACL1_2_HPLOUT_VOL, DACR1_2_HPROUT_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
SOC_DOUBLE_R("HP DAC Playback Switch", HPLOUT_CTRL, HPROUT_CTRL, 3,
|
|
0x01, 0),
|
|
SOC_DOUBLE_R_TLV("HP Right PGA Bypass Playback Volume",
|
|
PGAR_2_HPLOUT_VOL, PGAR_2_HPROUT_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
SOC_SINGLE_TLV("HPL PGA Bypass Playback Volume",
|
|
PGAL_2_HPLOUT_VOL, 0, 118, 1, output_stage_tlv),
|
|
SOC_SINGLE_TLV("HPR PGA Bypass Playback Volume",
|
|
PGAL_2_HPROUT_VOL, 0, 118, 1, output_stage_tlv),
|
|
SOC_DOUBLE_R_TLV("HP Line2 Bypass Playback Volume",
|
|
LINE2L_2_HPLOUT_VOL, LINE2R_2_HPROUT_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
|
|
SOC_DOUBLE_R_TLV("HPCOM DAC Playback Volume",
|
|
DACL1_2_HPLCOM_VOL, DACR1_2_HPRCOM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
SOC_DOUBLE_R("HPCOM DAC Playback Switch", HPLCOM_CTRL, HPRCOM_CTRL, 3,
|
|
0x01, 0),
|
|
SOC_SINGLE_TLV("HPLCOM PGA Bypass Playback Volume",
|
|
PGAL_2_HPLCOM_VOL, 0, 118, 1, output_stage_tlv),
|
|
SOC_SINGLE_TLV("HPRCOM PGA Bypass Playback Volume",
|
|
PGAL_2_HPRCOM_VOL, 0, 118, 1, output_stage_tlv),
|
|
SOC_DOUBLE_R_TLV("HPCOM Line2 Bypass Playback Volume",
|
|
LINE2L_2_HPLCOM_VOL, LINE2R_2_HPRCOM_VOL,
|
|
0, 118, 1, output_stage_tlv),
|
|
|
|
/*
|
|
* Note: enable Automatic input Gain Controller with care. It can
|
|
* adjust PGA to max value when ADC is on and will never go back.
|
|
*/
|
|
SOC_DOUBLE_R("AGC Switch", LAGC_CTRL_A, RAGC_CTRL_A, 7, 0x01, 0),
|
|
|
|
/* Input */
|
|
SOC_DOUBLE_R_TLV("PGA Capture Volume", LADC_VOL, RADC_VOL,
|
|
0, 119, 0, adc_tlv),
|
|
SOC_DOUBLE_R("PGA Capture Switch", LADC_VOL, RADC_VOL, 7, 0x01, 1),
|
|
|
|
SOC_ENUM("ADC HPF Cut-off", aic3x_enum[ADC_HPF_ENUM]),
|
|
};
|
|
|
|
/* Left DAC Mux */
|
|
static const struct snd_kcontrol_new aic3x_left_dac_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_enum[LDAC_ENUM]);
|
|
|
|
/* Right DAC Mux */
|
|
static const struct snd_kcontrol_new aic3x_right_dac_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_enum[RDAC_ENUM]);
|
|
|
|
/* Left HPCOM Mux */
|
|
static const struct snd_kcontrol_new aic3x_left_hpcom_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_enum[LHPCOM_ENUM]);
|
|
|
|
/* Right HPCOM Mux */
|
|
static const struct snd_kcontrol_new aic3x_right_hpcom_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_enum[RHPCOM_ENUM]);
|
|
|
|
/* Left DAC_L1 Mixer */
|
|
static const struct snd_kcontrol_new aic3x_left_dac_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("LineL Switch", DACL1_2_LLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("LineR Switch", DACL1_2_RLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("Mono Switch", DACL1_2_MONOLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HP Switch", DACL1_2_HPLOUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPCOM Switch", DACL1_2_HPLCOM_VOL, 7, 1, 0),
|
|
};
|
|
|
|
/* Right DAC_R1 Mixer */
|
|
static const struct snd_kcontrol_new aic3x_right_dac_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("LineL Switch", DACR1_2_LLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("LineR Switch", DACR1_2_RLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("Mono Switch", DACR1_2_MONOLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HP Switch", DACR1_2_HPROUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPCOM Switch", DACR1_2_HPRCOM_VOL, 7, 1, 0),
|
|
};
|
|
|
|
/* Left PGA Mixer */
|
|
static const struct snd_kcontrol_new aic3x_left_pga_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE_AIC3X("Line1L Switch", LINE1L_2_LADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Line1R Switch", LINE1R_2_LADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Line2L Switch", LINE2L_2_LADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Mic3L Switch", MIC3LR_2_LADC_CTRL, 4, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Mic3R Switch", MIC3LR_2_LADC_CTRL, 0, 1, 1),
|
|
};
|
|
|
|
/* Right PGA Mixer */
|
|
static const struct snd_kcontrol_new aic3x_right_pga_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE_AIC3X("Line1R Switch", LINE1R_2_RADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Line1L Switch", LINE1L_2_RADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Line2R Switch", LINE2R_2_RADC_CTRL, 3, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Mic3L Switch", MIC3LR_2_RADC_CTRL, 4, 1, 1),
|
|
SOC_DAPM_SINGLE_AIC3X("Mic3R Switch", MIC3LR_2_RADC_CTRL, 0, 1, 1),
|
|
};
|
|
|
|
/* Left Line1 Mux */
|
|
static const struct snd_kcontrol_new aic3x_left_line1_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_enum[LINE1L_ENUM]);
|
|
|
|
/* Right Line1 Mux */
|
|
static const struct snd_kcontrol_new aic3x_right_line1_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_enum[LINE1R_ENUM]);
|
|
|
|
/* Left Line2 Mux */
|
|
static const struct snd_kcontrol_new aic3x_left_line2_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_enum[LINE2L_ENUM]);
|
|
|
|
/* Right Line2 Mux */
|
|
static const struct snd_kcontrol_new aic3x_right_line2_mux_controls =
|
|
SOC_DAPM_ENUM("Route", aic3x_enum[LINE2R_ENUM]);
|
|
|
|
/* Left PGA Bypass Mixer */
|
|
static const struct snd_kcontrol_new aic3x_left_pga_bp_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("LineL Switch", PGAL_2_LLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("LineR Switch", PGAL_2_RLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("Mono Switch", PGAL_2_MONOLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPL Switch", PGAL_2_HPLOUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPR Switch", PGAL_2_HPROUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPLCOM Switch", PGAL_2_HPLCOM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPRCOM Switch", PGAL_2_HPRCOM_VOL, 7, 1, 0),
|
|
};
|
|
|
|
/* Right PGA Bypass Mixer */
|
|
static const struct snd_kcontrol_new aic3x_right_pga_bp_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("LineL Switch", PGAR_2_LLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("LineR Switch", PGAR_2_RLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("Mono Switch", PGAR_2_MONOLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPL Switch", PGAR_2_HPLOUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPR Switch", PGAR_2_HPROUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPLCOM Switch", PGAR_2_HPLCOM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPRCOM Switch", PGAR_2_HPRCOM_VOL, 7, 1, 0),
|
|
};
|
|
|
|
/* Left Line2 Bypass Mixer */
|
|
static const struct snd_kcontrol_new aic3x_left_line2_bp_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("LineL Switch", LINE2L_2_LLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("LineR Switch", LINE2L_2_RLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("Mono Switch", LINE2L_2_MONOLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HP Switch", LINE2L_2_HPLOUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPLCOM Switch", LINE2L_2_HPLCOM_VOL, 7, 1, 0),
|
|
};
|
|
|
|
/* Right Line2 Bypass Mixer */
|
|
static const struct snd_kcontrol_new aic3x_right_line2_bp_mixer_controls[] = {
|
|
SOC_DAPM_SINGLE("LineL Switch", LINE2R_2_LLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("LineR Switch", LINE2R_2_RLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("Mono Switch", LINE2R_2_MONOLOPM_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HP Switch", LINE2R_2_HPROUT_VOL, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("HPRCOM Switch", LINE2R_2_HPRCOM_VOL, 7, 1, 0),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = {
|
|
/* Left DAC to Left Outputs */
|
|
SND_SOC_DAPM_DAC("Left DAC", "Left Playback", DAC_PWR, 7, 0),
|
|
SND_SOC_DAPM_MUX("Left DAC Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_dac_mux_controls),
|
|
SND_SOC_DAPM_MIXER("Left DAC_L1 Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_dac_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_left_dac_mixer_controls)),
|
|
SND_SOC_DAPM_MUX("Left HPCOM Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_hpcom_mux_controls),
|
|
SND_SOC_DAPM_PGA("Left Line Out", LLOPM_CTRL, 0, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Left HP Out", HPLOUT_CTRL, 0, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Left HP Com", HPLCOM_CTRL, 0, 0, NULL, 0),
|
|
|
|
/* Right DAC to Right Outputs */
|
|
SND_SOC_DAPM_DAC("Right DAC", "Right Playback", DAC_PWR, 6, 0),
|
|
SND_SOC_DAPM_MUX("Right DAC Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_dac_mux_controls),
|
|
SND_SOC_DAPM_MIXER("Right DAC_R1 Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_dac_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_right_dac_mixer_controls)),
|
|
SND_SOC_DAPM_MUX("Right HPCOM Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_hpcom_mux_controls),
|
|
SND_SOC_DAPM_PGA("Right Line Out", RLOPM_CTRL, 0, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Right HP Out", HPROUT_CTRL, 0, 0, NULL, 0),
|
|
SND_SOC_DAPM_PGA("Right HP Com", HPRCOM_CTRL, 0, 0, NULL, 0),
|
|
|
|
/* Mono Output */
|
|
SND_SOC_DAPM_PGA("Mono Out", MONOLOPM_CTRL, 0, 0, NULL, 0),
|
|
|
|
/* Inputs to Left ADC */
|
|
SND_SOC_DAPM_ADC("Left ADC", "Left Capture", LINE1L_2_LADC_CTRL, 2, 0),
|
|
SND_SOC_DAPM_MIXER("Left PGA Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_pga_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_left_pga_mixer_controls)),
|
|
SND_SOC_DAPM_MUX("Left Line1L Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_line1_mux_controls),
|
|
SND_SOC_DAPM_MUX("Left Line1R Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_line1_mux_controls),
|
|
SND_SOC_DAPM_MUX("Left Line2L Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_line2_mux_controls),
|
|
|
|
/* Inputs to Right ADC */
|
|
SND_SOC_DAPM_ADC("Right ADC", "Right Capture",
|
|
LINE1R_2_RADC_CTRL, 2, 0),
|
|
SND_SOC_DAPM_MIXER("Right PGA Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_pga_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_right_pga_mixer_controls)),
|
|
SND_SOC_DAPM_MUX("Right Line1L Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_line1_mux_controls),
|
|
SND_SOC_DAPM_MUX("Right Line1R Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_line1_mux_controls),
|
|
SND_SOC_DAPM_MUX("Right Line2R Mux", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_line2_mux_controls),
|
|
|
|
/*
|
|
* Not a real mic bias widget but similar function. This is for dynamic
|
|
* control of GPIO1 digital mic modulator clock output function when
|
|
* using digital mic.
|
|
*/
|
|
SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "GPIO1 dmic modclk",
|
|
AIC3X_GPIO1_REG, 4, 0xf,
|
|
AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK,
|
|
AIC3X_GPIO1_FUNC_DISABLED),
|
|
|
|
/*
|
|
* Also similar function like mic bias. Selects digital mic with
|
|
* configurable oversampling rate instead of ADC converter.
|
|
*/
|
|
SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "DMic Rate 128",
|
|
AIC3X_ASD_INTF_CTRLA, 0, 3, 1, 0),
|
|
SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "DMic Rate 64",
|
|
AIC3X_ASD_INTF_CTRLA, 0, 3, 2, 0),
|
|
SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "DMic Rate 32",
|
|
AIC3X_ASD_INTF_CTRLA, 0, 3, 3, 0),
|
|
|
|
/* Mic Bias */
|
|
SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "Mic Bias 2V",
|
|
MICBIAS_CTRL, 6, 3, 1, 0),
|
|
SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "Mic Bias 2.5V",
|
|
MICBIAS_CTRL, 6, 3, 2, 0),
|
|
SND_SOC_DAPM_REG(snd_soc_dapm_micbias, "Mic Bias AVDD",
|
|
MICBIAS_CTRL, 6, 3, 3, 0),
|
|
|
|
/* Left PGA to Left Output bypass */
|
|
SND_SOC_DAPM_MIXER("Left PGA Bypass Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_pga_bp_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_left_pga_bp_mixer_controls)),
|
|
|
|
/* Right PGA to Right Output bypass */
|
|
SND_SOC_DAPM_MIXER("Right PGA Bypass Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_pga_bp_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_right_pga_bp_mixer_controls)),
|
|
|
|
/* Left Line2 to Left Output bypass */
|
|
SND_SOC_DAPM_MIXER("Left Line2 Bypass Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_left_line2_bp_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_left_line2_bp_mixer_controls)),
|
|
|
|
/* Right Line2 to Right Output bypass */
|
|
SND_SOC_DAPM_MIXER("Right Line2 Bypass Mixer", SND_SOC_NOPM, 0, 0,
|
|
&aic3x_right_line2_bp_mixer_controls[0],
|
|
ARRAY_SIZE(aic3x_right_line2_bp_mixer_controls)),
|
|
|
|
SND_SOC_DAPM_OUTPUT("LLOUT"),
|
|
SND_SOC_DAPM_OUTPUT("RLOUT"),
|
|
SND_SOC_DAPM_OUTPUT("MONO_LOUT"),
|
|
SND_SOC_DAPM_OUTPUT("HPLOUT"),
|
|
SND_SOC_DAPM_OUTPUT("HPROUT"),
|
|
SND_SOC_DAPM_OUTPUT("HPLCOM"),
|
|
SND_SOC_DAPM_OUTPUT("HPRCOM"),
|
|
|
|
SND_SOC_DAPM_INPUT("MIC3L"),
|
|
SND_SOC_DAPM_INPUT("MIC3R"),
|
|
SND_SOC_DAPM_INPUT("LINE1L"),
|
|
SND_SOC_DAPM_INPUT("LINE1R"),
|
|
SND_SOC_DAPM_INPUT("LINE2L"),
|
|
SND_SOC_DAPM_INPUT("LINE2R"),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route intercon[] = {
|
|
/* Left Output */
|
|
{"Left DAC Mux", "DAC_L1", "Left DAC"},
|
|
{"Left DAC Mux", "DAC_L2", "Left DAC"},
|
|
{"Left DAC Mux", "DAC_L3", "Left DAC"},
|
|
|
|
{"Left DAC_L1 Mixer", "LineL Switch", "Left DAC Mux"},
|
|
{"Left DAC_L1 Mixer", "LineR Switch", "Left DAC Mux"},
|
|
{"Left DAC_L1 Mixer", "Mono Switch", "Left DAC Mux"},
|
|
{"Left DAC_L1 Mixer", "HP Switch", "Left DAC Mux"},
|
|
{"Left DAC_L1 Mixer", "HPCOM Switch", "Left DAC Mux"},
|
|
{"Left Line Out", NULL, "Left DAC Mux"},
|
|
{"Left HP Out", NULL, "Left DAC Mux"},
|
|
|
|
{"Left HPCOM Mux", "differential of HPLOUT", "Left DAC_L1 Mixer"},
|
|
{"Left HPCOM Mux", "constant VCM", "Left DAC_L1 Mixer"},
|
|
{"Left HPCOM Mux", "single-ended", "Left DAC_L1 Mixer"},
|
|
|
|
{"Left Line Out", NULL, "Left DAC_L1 Mixer"},
|
|
{"Mono Out", NULL, "Left DAC_L1 Mixer"},
|
|
{"Left HP Out", NULL, "Left DAC_L1 Mixer"},
|
|
{"Left HP Com", NULL, "Left HPCOM Mux"},
|
|
|
|
{"LLOUT", NULL, "Left Line Out"},
|
|
{"LLOUT", NULL, "Left Line Out"},
|
|
{"HPLOUT", NULL, "Left HP Out"},
|
|
{"HPLCOM", NULL, "Left HP Com"},
|
|
|
|
/* Right Output */
|
|
{"Right DAC Mux", "DAC_R1", "Right DAC"},
|
|
{"Right DAC Mux", "DAC_R2", "Right DAC"},
|
|
{"Right DAC Mux", "DAC_R3", "Right DAC"},
|
|
|
|
{"Right DAC_R1 Mixer", "LineL Switch", "Right DAC Mux"},
|
|
{"Right DAC_R1 Mixer", "LineR Switch", "Right DAC Mux"},
|
|
{"Right DAC_R1 Mixer", "Mono Switch", "Right DAC Mux"},
|
|
{"Right DAC_R1 Mixer", "HP Switch", "Right DAC Mux"},
|
|
{"Right DAC_R1 Mixer", "HPCOM Switch", "Right DAC Mux"},
|
|
{"Right Line Out", NULL, "Right DAC Mux"},
|
|
{"Right HP Out", NULL, "Right DAC Mux"},
|
|
|
|
{"Right HPCOM Mux", "differential of HPROUT", "Right DAC_R1 Mixer"},
|
|
{"Right HPCOM Mux", "constant VCM", "Right DAC_R1 Mixer"},
|
|
{"Right HPCOM Mux", "single-ended", "Right DAC_R1 Mixer"},
|
|
{"Right HPCOM Mux", "differential of HPLCOM", "Right DAC_R1 Mixer"},
|
|
{"Right HPCOM Mux", "external feedback", "Right DAC_R1 Mixer"},
|
|
|
|
{"Right Line Out", NULL, "Right DAC_R1 Mixer"},
|
|
{"Mono Out", NULL, "Right DAC_R1 Mixer"},
|
|
{"Right HP Out", NULL, "Right DAC_R1 Mixer"},
|
|
{"Right HP Com", NULL, "Right HPCOM Mux"},
|
|
|
|
{"RLOUT", NULL, "Right Line Out"},
|
|
{"RLOUT", NULL, "Right Line Out"},
|
|
{"HPROUT", NULL, "Right HP Out"},
|
|
{"HPRCOM", NULL, "Right HP Com"},
|
|
|
|
/* Mono Output */
|
|
{"MONO_LOUT", NULL, "Mono Out"},
|
|
{"MONO_LOUT", NULL, "Mono Out"},
|
|
|
|
/* Left Input */
|
|
{"Left Line1L Mux", "single-ended", "LINE1L"},
|
|
{"Left Line1L Mux", "differential", "LINE1L"},
|
|
|
|
{"Left Line2L Mux", "single-ended", "LINE2L"},
|
|
{"Left Line2L Mux", "differential", "LINE2L"},
|
|
|
|
{"Left PGA Mixer", "Line1L Switch", "Left Line1L Mux"},
|
|
{"Left PGA Mixer", "Line1R Switch", "Left Line1R Mux"},
|
|
{"Left PGA Mixer", "Line2L Switch", "Left Line2L Mux"},
|
|
{"Left PGA Mixer", "Mic3L Switch", "MIC3L"},
|
|
{"Left PGA Mixer", "Mic3R Switch", "MIC3R"},
|
|
|
|
{"Left ADC", NULL, "Left PGA Mixer"},
|
|
{"Left ADC", NULL, "GPIO1 dmic modclk"},
|
|
|
|
/* Right Input */
|
|
{"Right Line1R Mux", "single-ended", "LINE1R"},
|
|
{"Right Line1R Mux", "differential", "LINE1R"},
|
|
|
|
{"Right Line2R Mux", "single-ended", "LINE2R"},
|
|
{"Right Line2R Mux", "differential", "LINE2R"},
|
|
|
|
{"Right PGA Mixer", "Line1L Switch", "Right Line1L Mux"},
|
|
{"Right PGA Mixer", "Line1R Switch", "Right Line1R Mux"},
|
|
{"Right PGA Mixer", "Line2R Switch", "Right Line2R Mux"},
|
|
{"Right PGA Mixer", "Mic3L Switch", "MIC3L"},
|
|
{"Right PGA Mixer", "Mic3R Switch", "MIC3R"},
|
|
|
|
{"Right ADC", NULL, "Right PGA Mixer"},
|
|
{"Right ADC", NULL, "GPIO1 dmic modclk"},
|
|
|
|
/* Left PGA Bypass */
|
|
{"Left PGA Bypass Mixer", "LineL Switch", "Left PGA Mixer"},
|
|
{"Left PGA Bypass Mixer", "LineR Switch", "Left PGA Mixer"},
|
|
{"Left PGA Bypass Mixer", "Mono Switch", "Left PGA Mixer"},
|
|
{"Left PGA Bypass Mixer", "HPL Switch", "Left PGA Mixer"},
|
|
{"Left PGA Bypass Mixer", "HPR Switch", "Left PGA Mixer"},
|
|
{"Left PGA Bypass Mixer", "HPLCOM Switch", "Left PGA Mixer"},
|
|
{"Left PGA Bypass Mixer", "HPRCOM Switch", "Left PGA Mixer"},
|
|
|
|
{"Left HPCOM Mux", "differential of HPLOUT", "Left PGA Bypass Mixer"},
|
|
{"Left HPCOM Mux", "constant VCM", "Left PGA Bypass Mixer"},
|
|
{"Left HPCOM Mux", "single-ended", "Left PGA Bypass Mixer"},
|
|
|
|
{"Left Line Out", NULL, "Left PGA Bypass Mixer"},
|
|
{"Mono Out", NULL, "Left PGA Bypass Mixer"},
|
|
{"Left HP Out", NULL, "Left PGA Bypass Mixer"},
|
|
|
|
/* Right PGA Bypass */
|
|
{"Right PGA Bypass Mixer", "LineL Switch", "Right PGA Mixer"},
|
|
{"Right PGA Bypass Mixer", "LineR Switch", "Right PGA Mixer"},
|
|
{"Right PGA Bypass Mixer", "Mono Switch", "Right PGA Mixer"},
|
|
{"Right PGA Bypass Mixer", "HPL Switch", "Right PGA Mixer"},
|
|
{"Right PGA Bypass Mixer", "HPR Switch", "Right PGA Mixer"},
|
|
{"Right PGA Bypass Mixer", "HPLCOM Switch", "Right PGA Mixer"},
|
|
{"Right PGA Bypass Mixer", "HPRCOM Switch", "Right PGA Mixer"},
|
|
|
|
{"Right HPCOM Mux", "differential of HPROUT", "Right PGA Bypass Mixer"},
|
|
{"Right HPCOM Mux", "constant VCM", "Right PGA Bypass Mixer"},
|
|
{"Right HPCOM Mux", "single-ended", "Right PGA Bypass Mixer"},
|
|
{"Right HPCOM Mux", "differential of HPLCOM", "Right PGA Bypass Mixer"},
|
|
{"Right HPCOM Mux", "external feedback", "Right PGA Bypass Mixer"},
|
|
|
|
{"Right Line Out", NULL, "Right PGA Bypass Mixer"},
|
|
{"Mono Out", NULL, "Right PGA Bypass Mixer"},
|
|
{"Right HP Out", NULL, "Right PGA Bypass Mixer"},
|
|
|
|
/* Left Line2 Bypass */
|
|
{"Left Line2 Bypass Mixer", "LineL Switch", "Left Line2L Mux"},
|
|
{"Left Line2 Bypass Mixer", "LineR Switch", "Left Line2L Mux"},
|
|
{"Left Line2 Bypass Mixer", "Mono Switch", "Left Line2L Mux"},
|
|
{"Left Line2 Bypass Mixer", "HP Switch", "Left Line2L Mux"},
|
|
{"Left Line2 Bypass Mixer", "HPLCOM Switch", "Left Line2L Mux"},
|
|
|
|
{"Left HPCOM Mux", "differential of HPLOUT", "Left Line2 Bypass Mixer"},
|
|
{"Left HPCOM Mux", "constant VCM", "Left Line2 Bypass Mixer"},
|
|
{"Left HPCOM Mux", "single-ended", "Left Line2 Bypass Mixer"},
|
|
|
|
{"Left Line Out", NULL, "Left Line2 Bypass Mixer"},
|
|
{"Mono Out", NULL, "Left Line2 Bypass Mixer"},
|
|
{"Left HP Out", NULL, "Left Line2 Bypass Mixer"},
|
|
|
|
/* Right Line2 Bypass */
|
|
{"Right Line2 Bypass Mixer", "LineL Switch", "Right Line2R Mux"},
|
|
{"Right Line2 Bypass Mixer", "LineR Switch", "Right Line2R Mux"},
|
|
{"Right Line2 Bypass Mixer", "Mono Switch", "Right Line2R Mux"},
|
|
{"Right Line2 Bypass Mixer", "HP Switch", "Right Line2R Mux"},
|
|
{"Right Line2 Bypass Mixer", "HPRCOM Switch", "Right Line2R Mux"},
|
|
|
|
{"Right HPCOM Mux", "differential of HPROUT", "Right Line2 Bypass Mixer"},
|
|
{"Right HPCOM Mux", "constant VCM", "Right Line2 Bypass Mixer"},
|
|
{"Right HPCOM Mux", "single-ended", "Right Line2 Bypass Mixer"},
|
|
{"Right HPCOM Mux", "differential of HPLCOM", "Right Line2 Bypass Mixer"},
|
|
{"Right HPCOM Mux", "external feedback", "Right Line2 Bypass Mixer"},
|
|
|
|
{"Right Line Out", NULL, "Right Line2 Bypass Mixer"},
|
|
{"Mono Out", NULL, "Right Line2 Bypass Mixer"},
|
|
{"Right HP Out", NULL, "Right Line2 Bypass Mixer"},
|
|
|
|
/*
|
|
* Logical path between digital mic enable and GPIO1 modulator clock
|
|
* output function
|
|
*/
|
|
{"GPIO1 dmic modclk", NULL, "DMic Rate 128"},
|
|
{"GPIO1 dmic modclk", NULL, "DMic Rate 64"},
|
|
{"GPIO1 dmic modclk", NULL, "DMic Rate 32"},
|
|
};
|
|
|
|
static int aic3x_add_widgets(struct snd_soc_codec *codec)
|
|
{
|
|
snd_soc_dapm_new_controls(codec, aic3x_dapm_widgets,
|
|
ARRAY_SIZE(aic3x_dapm_widgets));
|
|
|
|
/* set up audio path interconnects */
|
|
snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
|
|
|
|
snd_soc_dapm_new_widgets(codec);
|
|
return 0;
|
|
}
|
|
|
|
static int aic3x_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_device *socdev = rtd->socdev;
|
|
struct snd_soc_codec *codec = socdev->card->codec;
|
|
struct aic3x_priv *aic3x = codec->private_data;
|
|
int codec_clk = 0, bypass_pll = 0, fsref, last_clk = 0;
|
|
u8 data, r, p, pll_q, pll_p = 1, pll_r = 1, pll_j = 1;
|
|
u16 pll_d = 1;
|
|
u8 reg;
|
|
|
|
/* select data word length */
|
|
data =
|
|
aic3x_read_reg_cache(codec, AIC3X_ASD_INTF_CTRLB) & (~(0x3 << 4));
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S20_3LE:
|
|
data |= (0x01 << 4);
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S24_LE:
|
|
data |= (0x02 << 4);
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
data |= (0x03 << 4);
|
|
break;
|
|
}
|
|
aic3x_write(codec, AIC3X_ASD_INTF_CTRLB, data);
|
|
|
|
/* Fsref can be 44100 or 48000 */
|
|
fsref = (params_rate(params) % 11025 == 0) ? 44100 : 48000;
|
|
|
|
/* Try to find a value for Q which allows us to bypass the PLL and
|
|
* generate CODEC_CLK directly. */
|
|
for (pll_q = 2; pll_q < 18; pll_q++)
|
|
if (aic3x->sysclk / (128 * pll_q) == fsref) {
|
|
bypass_pll = 1;
|
|
break;
|
|
}
|
|
|
|
if (bypass_pll) {
|
|
pll_q &= 0xf;
|
|
aic3x_write(codec, AIC3X_PLL_PROGA_REG, pll_q << PLLQ_SHIFT);
|
|
aic3x_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_CLKDIV);
|
|
/* disable PLL if it is bypassed */
|
|
reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
|
|
aic3x_write(codec, AIC3X_PLL_PROGA_REG, reg & ~PLL_ENABLE);
|
|
|
|
} else {
|
|
aic3x_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_PLLDIV);
|
|
/* enable PLL when it is used */
|
|
reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
|
|
aic3x_write(codec, AIC3X_PLL_PROGA_REG, reg | PLL_ENABLE);
|
|
}
|
|
|
|
/* Route Left DAC to left channel input and
|
|
* right DAC to right channel input */
|
|
data = (LDAC2LCH | RDAC2RCH);
|
|
data |= (fsref == 44100) ? FSREF_44100 : FSREF_48000;
|
|
if (params_rate(params) >= 64000)
|
|
data |= DUAL_RATE_MODE;
|
|
aic3x_write(codec, AIC3X_CODEC_DATAPATH_REG, data);
|
|
|
|
/* codec sample rate select */
|
|
data = (fsref * 20) / params_rate(params);
|
|
if (params_rate(params) < 64000)
|
|
data /= 2;
|
|
data /= 5;
|
|
data -= 2;
|
|
data |= (data << 4);
|
|
aic3x_write(codec, AIC3X_SAMPLE_RATE_SEL_REG, data);
|
|
|
|
if (bypass_pll)
|
|
return 0;
|
|
|
|
/* Use PLL
|
|
* find an apropriate setup for j, d, r and p by iterating over
|
|
* p and r - j and d are calculated for each fraction.
|
|
* Up to 128 values are probed, the closest one wins the game.
|
|
* The sysclk is divided by 1000 to prevent integer overflows.
|
|
*/
|
|
codec_clk = (2048 * fsref) / (aic3x->sysclk / 1000);
|
|
|
|
for (r = 1; r <= 16; r++)
|
|
for (p = 1; p <= 8; p++) {
|
|
int clk, tmp = (codec_clk * pll_r * 10) / pll_p;
|
|
u8 j = tmp / 10000;
|
|
u16 d = tmp % 10000;
|
|
|
|
if (j > 63)
|
|
continue;
|
|
|
|
if (d != 0 && aic3x->sysclk < 10000000)
|
|
continue;
|
|
|
|
/* This is actually 1000 * ((j + (d/10000)) * r) / p
|
|
* The term had to be converted to get rid of the
|
|
* division by 10000 */
|
|
clk = ((10000 * j * r) + (d * r)) / (10 * p);
|
|
|
|
/* check whether this values get closer than the best
|
|
* ones we had before */
|
|
if (abs(codec_clk - clk) < abs(codec_clk - last_clk)) {
|
|
pll_j = j; pll_d = d; pll_r = r; pll_p = p;
|
|
last_clk = clk;
|
|
}
|
|
|
|
/* Early exit for exact matches */
|
|
if (clk == codec_clk)
|
|
break;
|
|
}
|
|
|
|
if (last_clk == 0) {
|
|
printk(KERN_ERR "%s(): unable to setup PLL\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
data = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
|
|
aic3x_write(codec, AIC3X_PLL_PROGA_REG, data | (pll_p << PLLP_SHIFT));
|
|
aic3x_write(codec, AIC3X_OVRF_STATUS_AND_PLLR_REG, pll_r << PLLR_SHIFT);
|
|
aic3x_write(codec, AIC3X_PLL_PROGB_REG, pll_j << PLLJ_SHIFT);
|
|
aic3x_write(codec, AIC3X_PLL_PROGC_REG, (pll_d >> 6) << PLLD_MSB_SHIFT);
|
|
aic3x_write(codec, AIC3X_PLL_PROGD_REG,
|
|
(pll_d & 0x3F) << PLLD_LSB_SHIFT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aic3x_mute(struct snd_soc_dai *dai, int mute)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
u8 ldac_reg = aic3x_read_reg_cache(codec, LDAC_VOL) & ~MUTE_ON;
|
|
u8 rdac_reg = aic3x_read_reg_cache(codec, RDAC_VOL) & ~MUTE_ON;
|
|
|
|
if (mute) {
|
|
aic3x_write(codec, LDAC_VOL, ldac_reg | MUTE_ON);
|
|
aic3x_write(codec, RDAC_VOL, rdac_reg | MUTE_ON);
|
|
} else {
|
|
aic3x_write(codec, LDAC_VOL, ldac_reg);
|
|
aic3x_write(codec, RDAC_VOL, rdac_reg);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aic3x_set_dai_sysclk(struct snd_soc_dai *codec_dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
struct aic3x_priv *aic3x = codec->private_data;
|
|
|
|
aic3x->sysclk = freq;
|
|
return 0;
|
|
}
|
|
|
|
static int aic3x_set_dai_fmt(struct snd_soc_dai *codec_dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
struct aic3x_priv *aic3x = codec->private_data;
|
|
u8 iface_areg, iface_breg;
|
|
int delay = 0;
|
|
|
|
iface_areg = aic3x_read_reg_cache(codec, AIC3X_ASD_INTF_CTRLA) & 0x3f;
|
|
iface_breg = aic3x_read_reg_cache(codec, AIC3X_ASD_INTF_CTRLB) & 0x3f;
|
|
|
|
/* set master/slave audio interface */
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
aic3x->master = 1;
|
|
iface_areg |= BIT_CLK_MASTER | WORD_CLK_MASTER;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
aic3x->master = 0;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* match both interface format and signal polarities since they
|
|
* are fixed
|
|
*/
|
|
switch (fmt & (SND_SOC_DAIFMT_FORMAT_MASK |
|
|
SND_SOC_DAIFMT_INV_MASK)) {
|
|
case (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF):
|
|
break;
|
|
case (SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_IB_NF):
|
|
delay = 1;
|
|
case (SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF):
|
|
iface_breg |= (0x01 << 6);
|
|
break;
|
|
case (SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_NB_NF):
|
|
iface_breg |= (0x02 << 6);
|
|
break;
|
|
case (SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF):
|
|
iface_breg |= (0x03 << 6);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* set iface */
|
|
aic3x_write(codec, AIC3X_ASD_INTF_CTRLA, iface_areg);
|
|
aic3x_write(codec, AIC3X_ASD_INTF_CTRLB, iface_breg);
|
|
aic3x_write(codec, AIC3X_ASD_INTF_CTRLC, delay);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aic3x_set_bias_level(struct snd_soc_codec *codec,
|
|
enum snd_soc_bias_level level)
|
|
{
|
|
struct aic3x_priv *aic3x = codec->private_data;
|
|
u8 reg;
|
|
|
|
switch (level) {
|
|
case SND_SOC_BIAS_ON:
|
|
/* all power is driven by DAPM system */
|
|
if (aic3x->master) {
|
|
/* enable pll */
|
|
reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
|
|
aic3x_write(codec, AIC3X_PLL_PROGA_REG,
|
|
reg | PLL_ENABLE);
|
|
}
|
|
break;
|
|
case SND_SOC_BIAS_PREPARE:
|
|
break;
|
|
case SND_SOC_BIAS_STANDBY:
|
|
/*
|
|
* all power is driven by DAPM system,
|
|
* so output power is safe if bypass was set
|
|
*/
|
|
if (aic3x->master) {
|
|
/* disable pll */
|
|
reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
|
|
aic3x_write(codec, AIC3X_PLL_PROGA_REG,
|
|
reg & ~PLL_ENABLE);
|
|
}
|
|
break;
|
|
case SND_SOC_BIAS_OFF:
|
|
/* force all power off */
|
|
reg = aic3x_read_reg_cache(codec, LINE1L_2_LADC_CTRL);
|
|
aic3x_write(codec, LINE1L_2_LADC_CTRL, reg & ~LADC_PWR_ON);
|
|
reg = aic3x_read_reg_cache(codec, LINE1R_2_RADC_CTRL);
|
|
aic3x_write(codec, LINE1R_2_RADC_CTRL, reg & ~RADC_PWR_ON);
|
|
|
|
reg = aic3x_read_reg_cache(codec, DAC_PWR);
|
|
aic3x_write(codec, DAC_PWR, reg & ~(LDAC_PWR_ON | RDAC_PWR_ON));
|
|
|
|
reg = aic3x_read_reg_cache(codec, HPLOUT_CTRL);
|
|
aic3x_write(codec, HPLOUT_CTRL, reg & ~HPLOUT_PWR_ON);
|
|
reg = aic3x_read_reg_cache(codec, HPROUT_CTRL);
|
|
aic3x_write(codec, HPROUT_CTRL, reg & ~HPROUT_PWR_ON);
|
|
|
|
reg = aic3x_read_reg_cache(codec, HPLCOM_CTRL);
|
|
aic3x_write(codec, HPLCOM_CTRL, reg & ~HPLCOM_PWR_ON);
|
|
reg = aic3x_read_reg_cache(codec, HPRCOM_CTRL);
|
|
aic3x_write(codec, HPRCOM_CTRL, reg & ~HPRCOM_PWR_ON);
|
|
|
|
reg = aic3x_read_reg_cache(codec, MONOLOPM_CTRL);
|
|
aic3x_write(codec, MONOLOPM_CTRL, reg & ~MONOLOPM_PWR_ON);
|
|
|
|
reg = aic3x_read_reg_cache(codec, LLOPM_CTRL);
|
|
aic3x_write(codec, LLOPM_CTRL, reg & ~LLOPM_PWR_ON);
|
|
reg = aic3x_read_reg_cache(codec, RLOPM_CTRL);
|
|
aic3x_write(codec, RLOPM_CTRL, reg & ~RLOPM_PWR_ON);
|
|
|
|
if (aic3x->master) {
|
|
/* disable pll */
|
|
reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
|
|
aic3x_write(codec, AIC3X_PLL_PROGA_REG,
|
|
reg & ~PLL_ENABLE);
|
|
}
|
|
break;
|
|
}
|
|
codec->bias_level = level;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void aic3x_set_gpio(struct snd_soc_codec *codec, int gpio, int state)
|
|
{
|
|
u8 reg = gpio ? AIC3X_GPIO2_REG : AIC3X_GPIO1_REG;
|
|
u8 bit = gpio ? 3: 0;
|
|
u8 val = aic3x_read_reg_cache(codec, reg) & ~(1 << bit);
|
|
aic3x_write(codec, reg, val | (!!state << bit));
|
|
}
|
|
EXPORT_SYMBOL_GPL(aic3x_set_gpio);
|
|
|
|
int aic3x_get_gpio(struct snd_soc_codec *codec, int gpio)
|
|
{
|
|
u8 reg = gpio ? AIC3X_GPIO2_REG : AIC3X_GPIO1_REG;
|
|
u8 val, bit = gpio ? 2: 1;
|
|
|
|
aic3x_read(codec, reg, &val);
|
|
return (val >> bit) & 1;
|
|
}
|
|
EXPORT_SYMBOL_GPL(aic3x_get_gpio);
|
|
|
|
void aic3x_set_headset_detection(struct snd_soc_codec *codec, int detect,
|
|
int headset_debounce, int button_debounce)
|
|
{
|
|
u8 val;
|
|
|
|
val = ((detect & AIC3X_HEADSET_DETECT_MASK)
|
|
<< AIC3X_HEADSET_DETECT_SHIFT) |
|
|
((headset_debounce & AIC3X_HEADSET_DEBOUNCE_MASK)
|
|
<< AIC3X_HEADSET_DEBOUNCE_SHIFT) |
|
|
((button_debounce & AIC3X_BUTTON_DEBOUNCE_MASK)
|
|
<< AIC3X_BUTTON_DEBOUNCE_SHIFT);
|
|
|
|
if (detect & AIC3X_HEADSET_DETECT_MASK)
|
|
val |= AIC3X_HEADSET_DETECT_ENABLED;
|
|
|
|
aic3x_write(codec, AIC3X_HEADSET_DETECT_CTRL_A, val);
|
|
}
|
|
EXPORT_SYMBOL_GPL(aic3x_set_headset_detection);
|
|
|
|
int aic3x_headset_detected(struct snd_soc_codec *codec)
|
|
{
|
|
u8 val;
|
|
aic3x_read(codec, AIC3X_HEADSET_DETECT_CTRL_B, &val);
|
|
return (val >> 4) & 1;
|
|
}
|
|
EXPORT_SYMBOL_GPL(aic3x_headset_detected);
|
|
|
|
int aic3x_button_pressed(struct snd_soc_codec *codec)
|
|
{
|
|
u8 val;
|
|
aic3x_read(codec, AIC3X_HEADSET_DETECT_CTRL_B, &val);
|
|
return (val >> 5) & 1;
|
|
}
|
|
EXPORT_SYMBOL_GPL(aic3x_button_pressed);
|
|
|
|
#define AIC3X_RATES SNDRV_PCM_RATE_8000_96000
|
|
#define AIC3X_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
|
|
SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
static struct snd_soc_dai_ops aic3x_dai_ops = {
|
|
.hw_params = aic3x_hw_params,
|
|
.digital_mute = aic3x_mute,
|
|
.set_sysclk = aic3x_set_dai_sysclk,
|
|
.set_fmt = aic3x_set_dai_fmt,
|
|
};
|
|
|
|
struct snd_soc_dai aic3x_dai = {
|
|
.name = "tlv320aic3x",
|
|
.playback = {
|
|
.stream_name = "Playback",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = AIC3X_RATES,
|
|
.formats = AIC3X_FORMATS,},
|
|
.capture = {
|
|
.stream_name = "Capture",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = AIC3X_RATES,
|
|
.formats = AIC3X_FORMATS,},
|
|
.ops = &aic3x_dai_ops,
|
|
};
|
|
EXPORT_SYMBOL_GPL(aic3x_dai);
|
|
|
|
static int aic3x_suspend(struct platform_device *pdev, pm_message_t state)
|
|
{
|
|
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
|
|
struct snd_soc_codec *codec = socdev->card->codec;
|
|
|
|
aic3x_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aic3x_resume(struct platform_device *pdev)
|
|
{
|
|
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
|
|
struct snd_soc_codec *codec = socdev->card->codec;
|
|
int i;
|
|
u8 data[2];
|
|
u8 *cache = codec->reg_cache;
|
|
|
|
/* Sync reg_cache with the hardware */
|
|
for (i = 0; i < ARRAY_SIZE(aic3x_reg); i++) {
|
|
data[0] = i;
|
|
data[1] = cache[i];
|
|
codec->hw_write(codec->control_data, data, 2);
|
|
}
|
|
|
|
aic3x_set_bias_level(codec, codec->suspend_bias_level);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* initialise the AIC3X driver
|
|
* register the mixer and dsp interfaces with the kernel
|
|
*/
|
|
static int aic3x_init(struct snd_soc_device *socdev)
|
|
{
|
|
struct snd_soc_codec *codec = socdev->card->codec;
|
|
struct aic3x_setup_data *setup = socdev->codec_data;
|
|
int reg, ret = 0;
|
|
|
|
codec->name = "tlv320aic3x";
|
|
codec->owner = THIS_MODULE;
|
|
codec->read = aic3x_read_reg_cache;
|
|
codec->write = aic3x_write;
|
|
codec->set_bias_level = aic3x_set_bias_level;
|
|
codec->dai = &aic3x_dai;
|
|
codec->num_dai = 1;
|
|
codec->reg_cache_size = ARRAY_SIZE(aic3x_reg);
|
|
codec->reg_cache = kmemdup(aic3x_reg, sizeof(aic3x_reg), GFP_KERNEL);
|
|
if (codec->reg_cache == NULL)
|
|
return -ENOMEM;
|
|
|
|
aic3x_write(codec, AIC3X_PAGE_SELECT, PAGE0_SELECT);
|
|
aic3x_write(codec, AIC3X_RESET, SOFT_RESET);
|
|
|
|
/* register pcms */
|
|
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "aic3x: failed to create pcms\n");
|
|
goto pcm_err;
|
|
}
|
|
|
|
/* DAC default volume and mute */
|
|
aic3x_write(codec, LDAC_VOL, DEFAULT_VOL | MUTE_ON);
|
|
aic3x_write(codec, RDAC_VOL, DEFAULT_VOL | MUTE_ON);
|
|
|
|
/* DAC to HP default volume and route to Output mixer */
|
|
aic3x_write(codec, DACL1_2_HPLOUT_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
aic3x_write(codec, DACR1_2_HPROUT_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
aic3x_write(codec, DACL1_2_HPLCOM_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
aic3x_write(codec, DACR1_2_HPRCOM_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
/* DAC to Line Out default volume and route to Output mixer */
|
|
aic3x_write(codec, DACL1_2_LLOPM_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
aic3x_write(codec, DACR1_2_RLOPM_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
/* DAC to Mono Line Out default volume and route to Output mixer */
|
|
aic3x_write(codec, DACL1_2_MONOLOPM_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
aic3x_write(codec, DACR1_2_MONOLOPM_VOL, DEFAULT_VOL | ROUTE_ON);
|
|
|
|
/* unmute all outputs */
|
|
reg = aic3x_read_reg_cache(codec, LLOPM_CTRL);
|
|
aic3x_write(codec, LLOPM_CTRL, reg | UNMUTE);
|
|
reg = aic3x_read_reg_cache(codec, RLOPM_CTRL);
|
|
aic3x_write(codec, RLOPM_CTRL, reg | UNMUTE);
|
|
reg = aic3x_read_reg_cache(codec, MONOLOPM_CTRL);
|
|
aic3x_write(codec, MONOLOPM_CTRL, reg | UNMUTE);
|
|
reg = aic3x_read_reg_cache(codec, HPLOUT_CTRL);
|
|
aic3x_write(codec, HPLOUT_CTRL, reg | UNMUTE);
|
|
reg = aic3x_read_reg_cache(codec, HPROUT_CTRL);
|
|
aic3x_write(codec, HPROUT_CTRL, reg | UNMUTE);
|
|
reg = aic3x_read_reg_cache(codec, HPLCOM_CTRL);
|
|
aic3x_write(codec, HPLCOM_CTRL, reg | UNMUTE);
|
|
reg = aic3x_read_reg_cache(codec, HPRCOM_CTRL);
|
|
aic3x_write(codec, HPRCOM_CTRL, reg | UNMUTE);
|
|
|
|
/* ADC default volume and unmute */
|
|
aic3x_write(codec, LADC_VOL, DEFAULT_GAIN);
|
|
aic3x_write(codec, RADC_VOL, DEFAULT_GAIN);
|
|
/* By default route Line1 to ADC PGA mixer */
|
|
aic3x_write(codec, LINE1L_2_LADC_CTRL, 0x0);
|
|
aic3x_write(codec, LINE1R_2_RADC_CTRL, 0x0);
|
|
|
|
/* PGA to HP Bypass default volume, disconnect from Output Mixer */
|
|
aic3x_write(codec, PGAL_2_HPLOUT_VOL, DEFAULT_VOL);
|
|
aic3x_write(codec, PGAR_2_HPROUT_VOL, DEFAULT_VOL);
|
|
aic3x_write(codec, PGAL_2_HPLCOM_VOL, DEFAULT_VOL);
|
|
aic3x_write(codec, PGAR_2_HPRCOM_VOL, DEFAULT_VOL);
|
|
/* PGA to Line Out default volume, disconnect from Output Mixer */
|
|
aic3x_write(codec, PGAL_2_LLOPM_VOL, DEFAULT_VOL);
|
|
aic3x_write(codec, PGAR_2_RLOPM_VOL, DEFAULT_VOL);
|
|
/* PGA to Mono Line Out default volume, disconnect from Output Mixer */
|
|
aic3x_write(codec, PGAL_2_MONOLOPM_VOL, DEFAULT_VOL);
|
|
aic3x_write(codec, PGAR_2_MONOLOPM_VOL, DEFAULT_VOL);
|
|
|
|
/* Line2 to HP Bypass default volume, disconnect from Output Mixer */
|
|
aic3x_write(codec, LINE2L_2_HPLOUT_VOL, DEFAULT_VOL);
|
|
aic3x_write(codec, LINE2R_2_HPROUT_VOL, DEFAULT_VOL);
|
|
aic3x_write(codec, LINE2L_2_HPLCOM_VOL, DEFAULT_VOL);
|
|
aic3x_write(codec, LINE2R_2_HPRCOM_VOL, DEFAULT_VOL);
|
|
/* Line2 Line Out default volume, disconnect from Output Mixer */
|
|
aic3x_write(codec, LINE2L_2_LLOPM_VOL, DEFAULT_VOL);
|
|
aic3x_write(codec, LINE2R_2_RLOPM_VOL, DEFAULT_VOL);
|
|
/* Line2 to Mono Out default volume, disconnect from Output Mixer */
|
|
aic3x_write(codec, LINE2L_2_MONOLOPM_VOL, DEFAULT_VOL);
|
|
aic3x_write(codec, LINE2R_2_MONOLOPM_VOL, DEFAULT_VOL);
|
|
|
|
/* off, with power on */
|
|
aic3x_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
|
|
|
|
/* setup GPIO functions */
|
|
aic3x_write(codec, AIC3X_GPIO1_REG, (setup->gpio_func[0] & 0xf) << 4);
|
|
aic3x_write(codec, AIC3X_GPIO2_REG, (setup->gpio_func[1] & 0xf) << 4);
|
|
|
|
snd_soc_add_controls(codec, aic3x_snd_controls,
|
|
ARRAY_SIZE(aic3x_snd_controls));
|
|
aic3x_add_widgets(codec);
|
|
ret = snd_soc_init_card(socdev);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "aic3x: failed to register card\n");
|
|
goto card_err;
|
|
}
|
|
|
|
return ret;
|
|
|
|
card_err:
|
|
snd_soc_free_pcms(socdev);
|
|
snd_soc_dapm_free(socdev);
|
|
pcm_err:
|
|
kfree(codec->reg_cache);
|
|
return ret;
|
|
}
|
|
|
|
static struct snd_soc_device *aic3x_socdev;
|
|
|
|
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
|
/*
|
|
* AIC3X 2 wire address can be up to 4 devices with device addresses
|
|
* 0x18, 0x19, 0x1A, 0x1B
|
|
*/
|
|
|
|
/*
|
|
* If the i2c layer weren't so broken, we could pass this kind of data
|
|
* around
|
|
*/
|
|
static int aic3x_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct snd_soc_device *socdev = aic3x_socdev;
|
|
struct snd_soc_codec *codec = socdev->card->codec;
|
|
int ret;
|
|
|
|
i2c_set_clientdata(i2c, codec);
|
|
codec->control_data = i2c;
|
|
|
|
ret = aic3x_init(socdev);
|
|
if (ret < 0)
|
|
printk(KERN_ERR "aic3x: failed to initialise AIC3X\n");
|
|
return ret;
|
|
}
|
|
|
|
static int aic3x_i2c_remove(struct i2c_client *client)
|
|
{
|
|
struct snd_soc_codec *codec = i2c_get_clientdata(client);
|
|
kfree(codec->reg_cache);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id aic3x_i2c_id[] = {
|
|
{ "tlv320aic3x", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, aic3x_i2c_id);
|
|
|
|
/* machine i2c codec control layer */
|
|
static struct i2c_driver aic3x_i2c_driver = {
|
|
.driver = {
|
|
.name = "aic3x I2C Codec",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = aic3x_i2c_probe,
|
|
.remove = aic3x_i2c_remove,
|
|
.id_table = aic3x_i2c_id,
|
|
};
|
|
|
|
static int aic3x_i2c_read(struct i2c_client *client, u8 *value, int len)
|
|
{
|
|
value[0] = i2c_smbus_read_byte_data(client, value[0]);
|
|
return (len == 1);
|
|
}
|
|
|
|
static int aic3x_add_i2c_device(struct platform_device *pdev,
|
|
const struct aic3x_setup_data *setup)
|
|
{
|
|
struct i2c_board_info info;
|
|
struct i2c_adapter *adapter;
|
|
struct i2c_client *client;
|
|
int ret;
|
|
|
|
ret = i2c_add_driver(&aic3x_i2c_driver);
|
|
if (ret != 0) {
|
|
dev_err(&pdev->dev, "can't add i2c driver\n");
|
|
return ret;
|
|
}
|
|
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
info.addr = setup->i2c_address;
|
|
strlcpy(info.type, "tlv320aic3x", I2C_NAME_SIZE);
|
|
|
|
adapter = i2c_get_adapter(setup->i2c_bus);
|
|
if (!adapter) {
|
|
dev_err(&pdev->dev, "can't get i2c adapter %d\n",
|
|
setup->i2c_bus);
|
|
goto err_driver;
|
|
}
|
|
|
|
client = i2c_new_device(adapter, &info);
|
|
i2c_put_adapter(adapter);
|
|
if (!client) {
|
|
dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
|
|
(unsigned int)info.addr);
|
|
goto err_driver;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_driver:
|
|
i2c_del_driver(&aic3x_i2c_driver);
|
|
return -ENODEV;
|
|
}
|
|
#endif
|
|
|
|
static int aic3x_probe(struct platform_device *pdev)
|
|
{
|
|
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
|
|
struct aic3x_setup_data *setup;
|
|
struct snd_soc_codec *codec;
|
|
struct aic3x_priv *aic3x;
|
|
int ret = 0;
|
|
|
|
printk(KERN_INFO "AIC3X Audio Codec %s\n", AIC3X_VERSION);
|
|
|
|
setup = socdev->codec_data;
|
|
codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
|
|
if (codec == NULL)
|
|
return -ENOMEM;
|
|
|
|
aic3x = kzalloc(sizeof(struct aic3x_priv), GFP_KERNEL);
|
|
if (aic3x == NULL) {
|
|
kfree(codec);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
codec->private_data = aic3x;
|
|
socdev->card->codec = codec;
|
|
mutex_init(&codec->mutex);
|
|
INIT_LIST_HEAD(&codec->dapm_widgets);
|
|
INIT_LIST_HEAD(&codec->dapm_paths);
|
|
|
|
aic3x_socdev = socdev;
|
|
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
|
if (setup->i2c_address) {
|
|
codec->hw_write = (hw_write_t) i2c_master_send;
|
|
codec->hw_read = (hw_read_t) aic3x_i2c_read;
|
|
ret = aic3x_add_i2c_device(pdev, setup);
|
|
}
|
|
#else
|
|
/* Add other interfaces here */
|
|
#endif
|
|
|
|
if (ret != 0) {
|
|
kfree(codec->private_data);
|
|
kfree(codec);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int aic3x_remove(struct platform_device *pdev)
|
|
{
|
|
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
|
|
struct snd_soc_codec *codec = socdev->card->codec;
|
|
|
|
/* power down chip */
|
|
if (codec->control_data)
|
|
aic3x_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
|
|
|
snd_soc_free_pcms(socdev);
|
|
snd_soc_dapm_free(socdev);
|
|
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
|
i2c_unregister_device(codec->control_data);
|
|
i2c_del_driver(&aic3x_i2c_driver);
|
|
#endif
|
|
kfree(codec->private_data);
|
|
kfree(codec);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct snd_soc_codec_device soc_codec_dev_aic3x = {
|
|
.probe = aic3x_probe,
|
|
.remove = aic3x_remove,
|
|
.suspend = aic3x_suspend,
|
|
.resume = aic3x_resume,
|
|
};
|
|
EXPORT_SYMBOL_GPL(soc_codec_dev_aic3x);
|
|
|
|
static int __init aic3x_modinit(void)
|
|
{
|
|
return snd_soc_register_dai(&aic3x_dai);
|
|
}
|
|
module_init(aic3x_modinit);
|
|
|
|
static void __exit aic3x_exit(void)
|
|
{
|
|
snd_soc_unregister_dai(&aic3x_dai);
|
|
}
|
|
module_exit(aic3x_exit);
|
|
|
|
MODULE_DESCRIPTION("ASoC TLV320AIC3X codec driver");
|
|
MODULE_AUTHOR("Vladimir Barinov");
|
|
MODULE_LICENSE("GPL");
|