mirror of
https://github.com/torvalds/linux.git
synced 2024-11-25 05:32:00 +00:00
4391affa10
These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. While add it, also remove commas after the sentinel entries. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20240508072928.2135858-2-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
609 lines
14 KiB
C
609 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* 3-axis accelerometer driver for MXC4005XC Memsic sensor
|
|
*
|
|
* Copyright (c) 2014, Intel Corporation.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
|
|
#define MXC4005_DRV_NAME "mxc4005"
|
|
#define MXC4005_IRQ_NAME "mxc4005_event"
|
|
#define MXC4005_REGMAP_NAME "mxc4005_regmap"
|
|
|
|
#define MXC4005_REG_XOUT_UPPER 0x03
|
|
#define MXC4005_REG_XOUT_LOWER 0x04
|
|
#define MXC4005_REG_YOUT_UPPER 0x05
|
|
#define MXC4005_REG_YOUT_LOWER 0x06
|
|
#define MXC4005_REG_ZOUT_UPPER 0x07
|
|
#define MXC4005_REG_ZOUT_LOWER 0x08
|
|
|
|
#define MXC4005_REG_INT_MASK0 0x0A
|
|
|
|
#define MXC4005_REG_INT_MASK1 0x0B
|
|
#define MXC4005_REG_INT_MASK1_BIT_DRDYE 0x01
|
|
|
|
#define MXC4005_REG_INT_CLR0 0x00
|
|
|
|
#define MXC4005_REG_INT_CLR1 0x01
|
|
#define MXC4005_REG_INT_CLR1_BIT_DRDYC 0x01
|
|
#define MXC4005_REG_INT_CLR1_SW_RST 0x10
|
|
|
|
#define MXC4005_REG_CONTROL 0x0D
|
|
#define MXC4005_REG_CONTROL_MASK_FSR GENMASK(6, 5)
|
|
#define MXC4005_CONTROL_FSR_SHIFT 5
|
|
|
|
#define MXC4005_REG_DEVICE_ID 0x0E
|
|
|
|
/* Datasheet does not specify a reset time, this is a conservative guess */
|
|
#define MXC4005_RESET_TIME_US 2000
|
|
|
|
enum mxc4005_axis {
|
|
AXIS_X,
|
|
AXIS_Y,
|
|
AXIS_Z,
|
|
};
|
|
|
|
enum mxc4005_range {
|
|
MXC4005_RANGE_2G,
|
|
MXC4005_RANGE_4G,
|
|
MXC4005_RANGE_8G,
|
|
};
|
|
|
|
struct mxc4005_data {
|
|
struct device *dev;
|
|
struct mutex mutex;
|
|
struct regmap *regmap;
|
|
struct iio_trigger *dready_trig;
|
|
struct iio_mount_matrix orientation;
|
|
/* Ensure timestamp is naturally aligned */
|
|
struct {
|
|
__be16 chans[3];
|
|
s64 timestamp __aligned(8);
|
|
} scan;
|
|
bool trigger_enabled;
|
|
unsigned int control;
|
|
unsigned int int_mask1;
|
|
};
|
|
|
|
/*
|
|
* MXC4005 can operate in the following ranges:
|
|
* +/- 2G, 4G, 8G (the default +/-2G)
|
|
*
|
|
* (2 + 2) * 9.81 / (2^12 - 1) = 0.009582
|
|
* (4 + 4) * 9.81 / (2^12 - 1) = 0.019164
|
|
* (8 + 8) * 9.81 / (2^12 - 1) = 0.038329
|
|
*/
|
|
static const struct {
|
|
u8 range;
|
|
int scale;
|
|
} mxc4005_scale_table[] = {
|
|
{MXC4005_RANGE_2G, 9582},
|
|
{MXC4005_RANGE_4G, 19164},
|
|
{MXC4005_RANGE_8G, 38329},
|
|
};
|
|
|
|
|
|
static IIO_CONST_ATTR(in_accel_scale_available, "0.009582 0.019164 0.038329");
|
|
|
|
static struct attribute *mxc4005_attributes[] = {
|
|
&iio_const_attr_in_accel_scale_available.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group mxc4005_attrs_group = {
|
|
.attrs = mxc4005_attributes,
|
|
};
|
|
|
|
static bool mxc4005_is_readable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case MXC4005_REG_XOUT_UPPER:
|
|
case MXC4005_REG_XOUT_LOWER:
|
|
case MXC4005_REG_YOUT_UPPER:
|
|
case MXC4005_REG_YOUT_LOWER:
|
|
case MXC4005_REG_ZOUT_UPPER:
|
|
case MXC4005_REG_ZOUT_LOWER:
|
|
case MXC4005_REG_DEVICE_ID:
|
|
case MXC4005_REG_CONTROL:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool mxc4005_is_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case MXC4005_REG_INT_CLR0:
|
|
case MXC4005_REG_INT_CLR1:
|
|
case MXC4005_REG_INT_MASK0:
|
|
case MXC4005_REG_INT_MASK1:
|
|
case MXC4005_REG_CONTROL:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config mxc4005_regmap_config = {
|
|
.name = MXC4005_REGMAP_NAME,
|
|
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = MXC4005_REG_DEVICE_ID,
|
|
|
|
.readable_reg = mxc4005_is_readable_reg,
|
|
.writeable_reg = mxc4005_is_writeable_reg,
|
|
};
|
|
|
|
static int mxc4005_read_xyz(struct mxc4005_data *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_bulk_read(data->regmap, MXC4005_REG_XOUT_UPPER,
|
|
data->scan.chans, sizeof(data->scan.chans));
|
|
if (ret < 0) {
|
|
dev_err(data->dev, "failed to read axes\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxc4005_read_axis(struct mxc4005_data *data,
|
|
unsigned int addr)
|
|
{
|
|
__be16 reg;
|
|
int ret;
|
|
|
|
ret = regmap_bulk_read(data->regmap, addr, ®, sizeof(reg));
|
|
if (ret < 0) {
|
|
dev_err(data->dev, "failed to read reg %02x\n", addr);
|
|
return ret;
|
|
}
|
|
|
|
return be16_to_cpu(reg);
|
|
}
|
|
|
|
static int mxc4005_read_scale(struct mxc4005_data *data)
|
|
{
|
|
unsigned int reg;
|
|
int ret;
|
|
int i;
|
|
|
|
ret = regmap_read(data->regmap, MXC4005_REG_CONTROL, ®);
|
|
if (ret < 0) {
|
|
dev_err(data->dev, "failed to read reg_control\n");
|
|
return ret;
|
|
}
|
|
|
|
i = reg >> MXC4005_CONTROL_FSR_SHIFT;
|
|
|
|
if (i < 0 || i >= ARRAY_SIZE(mxc4005_scale_table))
|
|
return -EINVAL;
|
|
|
|
return mxc4005_scale_table[i].scale;
|
|
}
|
|
|
|
static int mxc4005_set_scale(struct mxc4005_data *data, int val)
|
|
{
|
|
unsigned int reg;
|
|
int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mxc4005_scale_table); i++) {
|
|
if (mxc4005_scale_table[i].scale == val) {
|
|
reg = i << MXC4005_CONTROL_FSR_SHIFT;
|
|
ret = regmap_update_bits(data->regmap,
|
|
MXC4005_REG_CONTROL,
|
|
MXC4005_REG_CONTROL_MASK_FSR,
|
|
reg);
|
|
if (ret < 0)
|
|
dev_err(data->dev,
|
|
"failed to write reg_control\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int mxc4005_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct mxc4005_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
switch (chan->type) {
|
|
case IIO_ACCEL:
|
|
if (iio_buffer_enabled(indio_dev))
|
|
return -EBUSY;
|
|
|
|
ret = mxc4005_read_axis(data, chan->address);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = sign_extend32(ret >> chan->scan_type.shift,
|
|
chan->scan_type.realbits - 1);
|
|
return IIO_VAL_INT;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
case IIO_CHAN_INFO_SCALE:
|
|
ret = mxc4005_read_scale(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = 0;
|
|
*val2 = ret;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int mxc4005_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long mask)
|
|
{
|
|
struct mxc4005_data *data = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SCALE:
|
|
if (val != 0)
|
|
return -EINVAL;
|
|
|
|
return mxc4005_set_scale(data, val2);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static const struct iio_mount_matrix *
|
|
mxc4005_get_mount_matrix(const struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan)
|
|
{
|
|
struct mxc4005_data *data = iio_priv(indio_dev);
|
|
|
|
return &data->orientation;
|
|
}
|
|
|
|
static const struct iio_chan_spec_ext_info mxc4005_ext_info[] = {
|
|
IIO_MOUNT_MATRIX(IIO_SHARED_BY_TYPE, mxc4005_get_mount_matrix),
|
|
{ }
|
|
};
|
|
|
|
static const struct iio_info mxc4005_info = {
|
|
.read_raw = mxc4005_read_raw,
|
|
.write_raw = mxc4005_write_raw,
|
|
.attrs = &mxc4005_attrs_group,
|
|
};
|
|
|
|
static const unsigned long mxc4005_scan_masks[] = {
|
|
BIT(AXIS_X) | BIT(AXIS_Y) | BIT(AXIS_Z),
|
|
0
|
|
};
|
|
|
|
#define MXC4005_CHANNEL(_axis, _addr) { \
|
|
.type = IIO_ACCEL, \
|
|
.modified = 1, \
|
|
.channel2 = IIO_MOD_##_axis, \
|
|
.address = _addr, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
|
.scan_index = AXIS_##_axis, \
|
|
.scan_type = { \
|
|
.sign = 's', \
|
|
.realbits = 12, \
|
|
.storagebits = 16, \
|
|
.shift = 4, \
|
|
.endianness = IIO_BE, \
|
|
}, \
|
|
.ext_info = mxc4005_ext_info, \
|
|
}
|
|
|
|
static const struct iio_chan_spec mxc4005_channels[] = {
|
|
MXC4005_CHANNEL(X, MXC4005_REG_XOUT_UPPER),
|
|
MXC4005_CHANNEL(Y, MXC4005_REG_YOUT_UPPER),
|
|
MXC4005_CHANNEL(Z, MXC4005_REG_ZOUT_UPPER),
|
|
IIO_CHAN_SOFT_TIMESTAMP(3),
|
|
};
|
|
|
|
static irqreturn_t mxc4005_trigger_handler(int irq, void *private)
|
|
{
|
|
struct iio_poll_func *pf = private;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct mxc4005_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
ret = mxc4005_read_xyz(data);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
|
|
pf->timestamp);
|
|
|
|
err:
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void mxc4005_clr_intr(struct mxc4005_data *data)
|
|
{
|
|
int ret;
|
|
|
|
/* clear interrupt */
|
|
ret = regmap_write(data->regmap, MXC4005_REG_INT_CLR1,
|
|
MXC4005_REG_INT_CLR1_BIT_DRDYC);
|
|
if (ret < 0)
|
|
dev_err(data->dev, "failed to write to reg_int_clr1\n");
|
|
}
|
|
|
|
static int mxc4005_set_trigger_state(struct iio_trigger *trig,
|
|
bool state)
|
|
{
|
|
struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
|
|
struct mxc4005_data *data = iio_priv(indio_dev);
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
mutex_lock(&data->mutex);
|
|
|
|
val = state ? MXC4005_REG_INT_MASK1_BIT_DRDYE : 0;
|
|
ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1, val);
|
|
if (ret < 0) {
|
|
mutex_unlock(&data->mutex);
|
|
dev_err(data->dev, "failed to update reg_int_mask1");
|
|
return ret;
|
|
}
|
|
|
|
data->int_mask1 = val;
|
|
data->trigger_enabled = state;
|
|
mutex_unlock(&data->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mxc4005_trigger_reen(struct iio_trigger *trig)
|
|
{
|
|
struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
|
|
struct mxc4005_data *data = iio_priv(indio_dev);
|
|
|
|
if (!data->dready_trig)
|
|
return;
|
|
|
|
mxc4005_clr_intr(data);
|
|
}
|
|
|
|
static const struct iio_trigger_ops mxc4005_trigger_ops = {
|
|
.set_trigger_state = mxc4005_set_trigger_state,
|
|
.reenable = mxc4005_trigger_reen,
|
|
};
|
|
|
|
static int mxc4005_chip_init(struct mxc4005_data *data)
|
|
{
|
|
int ret;
|
|
unsigned int reg;
|
|
|
|
ret = regmap_read(data->regmap, MXC4005_REG_DEVICE_ID, ®);
|
|
if (ret < 0) {
|
|
dev_err(data->dev, "failed to read chip id\n");
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(data->dev, "MXC4005 chip id %02x\n", reg);
|
|
|
|
ret = regmap_write(data->regmap, MXC4005_REG_INT_CLR1,
|
|
MXC4005_REG_INT_CLR1_SW_RST);
|
|
if (ret < 0)
|
|
return dev_err_probe(data->dev, ret, "resetting chip\n");
|
|
|
|
fsleep(MXC4005_RESET_TIME_US);
|
|
|
|
ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK0, 0);
|
|
if (ret < 0)
|
|
return dev_err_probe(data->dev, ret, "writing INT_MASK0\n");
|
|
|
|
ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1, 0);
|
|
if (ret < 0)
|
|
return dev_err_probe(data->dev, ret, "writing INT_MASK1\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mxc4005_probe(struct i2c_client *client)
|
|
{
|
|
struct mxc4005_data *data;
|
|
struct iio_dev *indio_dev;
|
|
struct regmap *regmap;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
regmap = devm_regmap_init_i2c(client, &mxc4005_regmap_config);
|
|
if (IS_ERR(regmap)) {
|
|
dev_err(&client->dev, "failed to initialize regmap\n");
|
|
return PTR_ERR(regmap);
|
|
}
|
|
|
|
data = iio_priv(indio_dev);
|
|
i2c_set_clientdata(client, indio_dev);
|
|
data->dev = &client->dev;
|
|
data->regmap = regmap;
|
|
|
|
ret = mxc4005_chip_init(data);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "failed to initialize chip\n");
|
|
return ret;
|
|
}
|
|
|
|
mutex_init(&data->mutex);
|
|
|
|
if (!iio_read_acpi_mount_matrix(&client->dev, &data->orientation, "ROTM")) {
|
|
ret = iio_read_mount_matrix(&client->dev, &data->orientation);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
indio_dev->channels = mxc4005_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(mxc4005_channels);
|
|
indio_dev->available_scan_masks = mxc4005_scan_masks;
|
|
indio_dev->name = MXC4005_DRV_NAME;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &mxc4005_info;
|
|
|
|
ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev,
|
|
iio_pollfunc_store_time,
|
|
mxc4005_trigger_handler,
|
|
NULL);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev,
|
|
"failed to setup iio triggered buffer\n");
|
|
return ret;
|
|
}
|
|
|
|
if (client->irq > 0) {
|
|
data->dready_trig = devm_iio_trigger_alloc(&client->dev,
|
|
"%s-dev%d",
|
|
indio_dev->name,
|
|
iio_device_id(indio_dev));
|
|
if (!data->dready_trig)
|
|
return -ENOMEM;
|
|
|
|
ret = devm_request_threaded_irq(&client->dev, client->irq,
|
|
iio_trigger_generic_data_rdy_poll,
|
|
NULL,
|
|
IRQF_TRIGGER_FALLING |
|
|
IRQF_ONESHOT,
|
|
MXC4005_IRQ_NAME,
|
|
data->dready_trig);
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"failed to init threaded irq\n");
|
|
return ret;
|
|
}
|
|
|
|
data->dready_trig->ops = &mxc4005_trigger_ops;
|
|
iio_trigger_set_drvdata(data->dready_trig, indio_dev);
|
|
ret = devm_iio_trigger_register(&client->dev,
|
|
data->dready_trig);
|
|
if (ret) {
|
|
dev_err(&client->dev,
|
|
"failed to register trigger\n");
|
|
return ret;
|
|
}
|
|
|
|
indio_dev->trig = iio_trigger_get(data->dready_trig);
|
|
}
|
|
|
|
return devm_iio_device_register(&client->dev, indio_dev);
|
|
}
|
|
|
|
static int mxc4005_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct mxc4005_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
/* Save control to restore it on resume */
|
|
ret = regmap_read(data->regmap, MXC4005_REG_CONTROL, &data->control);
|
|
if (ret < 0)
|
|
dev_err(data->dev, "failed to read reg_control\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mxc4005_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct mxc4005_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
ret = regmap_write(data->regmap, MXC4005_REG_INT_CLR1,
|
|
MXC4005_REG_INT_CLR1_SW_RST);
|
|
if (ret) {
|
|
dev_err(data->dev, "failed to reset chip: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
fsleep(MXC4005_RESET_TIME_US);
|
|
|
|
ret = regmap_write(data->regmap, MXC4005_REG_CONTROL, data->control);
|
|
if (ret) {
|
|
dev_err(data->dev, "failed to restore control register\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK0, 0);
|
|
if (ret) {
|
|
dev_err(data->dev, "failed to restore interrupt 0 mask\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_write(data->regmap, MXC4005_REG_INT_MASK1, data->int_mask1);
|
|
if (ret) {
|
|
dev_err(data->dev, "failed to restore interrupt 1 mask\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static DEFINE_SIMPLE_DEV_PM_OPS(mxc4005_pm_ops, mxc4005_suspend, mxc4005_resume);
|
|
|
|
static const struct acpi_device_id mxc4005_acpi_match[] = {
|
|
{"MXC4005", 0},
|
|
{"MXC6655", 0},
|
|
{"MDA6655", 0},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, mxc4005_acpi_match);
|
|
|
|
static const struct of_device_id mxc4005_of_match[] = {
|
|
{ .compatible = "memsic,mxc4005", },
|
|
{ .compatible = "memsic,mxc6655", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mxc4005_of_match);
|
|
|
|
static const struct i2c_device_id mxc4005_id[] = {
|
|
{ "mxc4005" },
|
|
{ "mxc6655" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mxc4005_id);
|
|
|
|
static struct i2c_driver mxc4005_driver = {
|
|
.driver = {
|
|
.name = MXC4005_DRV_NAME,
|
|
.acpi_match_table = mxc4005_acpi_match,
|
|
.of_match_table = mxc4005_of_match,
|
|
.pm = pm_sleep_ptr(&mxc4005_pm_ops),
|
|
},
|
|
.probe = mxc4005_probe,
|
|
.id_table = mxc4005_id,
|
|
};
|
|
|
|
module_i2c_driver(mxc4005_driver);
|
|
|
|
MODULE_AUTHOR("Teodora Baluta <teodora.baluta@intel.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("MXC4005 3-axis accelerometer driver");
|