mirror of
https://github.com/torvalds/linux.git
synced 2024-12-15 15:41:58 +00:00
27ff836d2f
Allow reading the oscillator status bit. Also allow clearing it even if that makes little sense and can't be done in a race free way. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
499 lines
13 KiB
C
499 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* An I2C driver for the PCF85063 RTC
|
|
* Copyright 2014 Rose Technology
|
|
*
|
|
* Author: Søren Andersen <san@rosetechnology.dk>
|
|
* Maintainers: http://www.nslu2-linux.org/
|
|
*
|
|
* Copyright (C) 2019 Micro Crystal AG
|
|
* Author: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
*/
|
|
#include <linux/i2c.h>
|
|
#include <linux/bcd.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/pm_wakeirq.h>
|
|
#include <linux/regmap.h>
|
|
|
|
/*
|
|
* Information for this driver was pulled from the following datasheets.
|
|
*
|
|
* http://www.nxp.com/documents/data_sheet/PCF85063A.pdf
|
|
* http://www.nxp.com/documents/data_sheet/PCF85063TP.pdf
|
|
*
|
|
* PCF85063A -- Rev. 6 — 18 November 2015
|
|
* PCF85063TP -- Rev. 4 — 6 May 2015
|
|
*
|
|
* https://www.microcrystal.com/fileadmin/Media/Products/RTC/App.Manual/RV-8263-C7_App-Manual.pdf
|
|
* RV8263 -- Rev. 1.0 — January 2019
|
|
*/
|
|
|
|
#define PCF85063_REG_CTRL1 0x00 /* status */
|
|
#define PCF85063_REG_CTRL1_CAP_SEL BIT(0)
|
|
#define PCF85063_REG_CTRL1_STOP BIT(5)
|
|
|
|
#define PCF85063_REG_CTRL2 0x01
|
|
#define PCF85063_CTRL2_AF BIT(6)
|
|
#define PCF85063_CTRL2_AIE BIT(7)
|
|
|
|
#define PCF85063_REG_OFFSET 0x02
|
|
#define PCF85063_OFFSET_SIGN_BIT 6 /* 2's complement sign bit */
|
|
#define PCF85063_OFFSET_MODE BIT(7)
|
|
#define PCF85063_OFFSET_STEP0 4340
|
|
#define PCF85063_OFFSET_STEP1 4069
|
|
|
|
#define PCF85063_REG_RAM 0x03
|
|
|
|
#define PCF85063_REG_SC 0x04 /* datetime */
|
|
#define PCF85063_REG_SC_OS 0x80
|
|
|
|
#define PCF85063_REG_ALM_S 0x0b
|
|
#define PCF85063_AEN BIT(7)
|
|
|
|
struct pcf85063_config {
|
|
struct regmap_config regmap;
|
|
unsigned has_alarms:1;
|
|
unsigned force_cap_7000:1;
|
|
};
|
|
|
|
struct pcf85063 {
|
|
struct rtc_device *rtc;
|
|
struct regmap *regmap;
|
|
};
|
|
|
|
static int pcf85063_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct pcf85063 *pcf85063 = dev_get_drvdata(dev);
|
|
int rc;
|
|
u8 regs[7];
|
|
|
|
/*
|
|
* while reading, the time/date registers are blocked and not updated
|
|
* anymore until the access is finished. To not lose a second
|
|
* event, the access must be finished within one second. So, read all
|
|
* time/date registers in one turn.
|
|
*/
|
|
rc = regmap_bulk_read(pcf85063->regmap, PCF85063_REG_SC, regs,
|
|
sizeof(regs));
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* if the clock has lost its power it makes no sense to use its time */
|
|
if (regs[0] & PCF85063_REG_SC_OS) {
|
|
dev_warn(&pcf85063->rtc->dev, "Power loss detected, invalid time\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
tm->tm_sec = bcd2bin(regs[0] & 0x7F);
|
|
tm->tm_min = bcd2bin(regs[1] & 0x7F);
|
|
tm->tm_hour = bcd2bin(regs[2] & 0x3F); /* rtc hr 0-23 */
|
|
tm->tm_mday = bcd2bin(regs[3] & 0x3F);
|
|
tm->tm_wday = regs[4] & 0x07;
|
|
tm->tm_mon = bcd2bin(regs[5] & 0x1F) - 1; /* rtc mn 1-12 */
|
|
tm->tm_year = bcd2bin(regs[6]);
|
|
tm->tm_year += 100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcf85063_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct pcf85063 *pcf85063 = dev_get_drvdata(dev);
|
|
int rc;
|
|
u8 regs[7];
|
|
|
|
/*
|
|
* to accurately set the time, reset the divider chain and keep it in
|
|
* reset state until all time/date registers are written
|
|
*/
|
|
rc = regmap_update_bits(pcf85063->regmap, PCF85063_REG_CTRL1,
|
|
PCF85063_REG_CTRL1_STOP,
|
|
PCF85063_REG_CTRL1_STOP);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* hours, minutes and seconds */
|
|
regs[0] = bin2bcd(tm->tm_sec) & 0x7F; /* clear OS flag */
|
|
|
|
regs[1] = bin2bcd(tm->tm_min);
|
|
regs[2] = bin2bcd(tm->tm_hour);
|
|
|
|
/* Day of month, 1 - 31 */
|
|
regs[3] = bin2bcd(tm->tm_mday);
|
|
|
|
/* Day, 0 - 6 */
|
|
regs[4] = tm->tm_wday & 0x07;
|
|
|
|
/* month, 1 - 12 */
|
|
regs[5] = bin2bcd(tm->tm_mon + 1);
|
|
|
|
/* year and century */
|
|
regs[6] = bin2bcd(tm->tm_year - 100);
|
|
|
|
/* write all registers at once */
|
|
rc = regmap_bulk_write(pcf85063->regmap, PCF85063_REG_SC,
|
|
regs, sizeof(regs));
|
|
if (rc)
|
|
return rc;
|
|
|
|
/*
|
|
* Write the control register as a separate action since the size of
|
|
* the register space is different between the PCF85063TP and
|
|
* PCF85063A devices. The rollover point can not be used.
|
|
*/
|
|
return regmap_update_bits(pcf85063->regmap, PCF85063_REG_CTRL1,
|
|
PCF85063_REG_CTRL1_STOP, 0);
|
|
}
|
|
|
|
static int pcf85063_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct pcf85063 *pcf85063 = dev_get_drvdata(dev);
|
|
u8 buf[4];
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_bulk_read(pcf85063->regmap, PCF85063_REG_ALM_S,
|
|
buf, sizeof(buf));
|
|
if (ret)
|
|
return ret;
|
|
|
|
alrm->time.tm_sec = bcd2bin(buf[0]);
|
|
alrm->time.tm_min = bcd2bin(buf[1]);
|
|
alrm->time.tm_hour = bcd2bin(buf[2]);
|
|
alrm->time.tm_mday = bcd2bin(buf[3]);
|
|
|
|
ret = regmap_read(pcf85063->regmap, PCF85063_REG_CTRL2, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
alrm->enabled = !!(val & PCF85063_CTRL2_AIE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcf85063_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct pcf85063 *pcf85063 = dev_get_drvdata(dev);
|
|
u8 buf[5];
|
|
int ret;
|
|
|
|
buf[0] = bin2bcd(alrm->time.tm_sec);
|
|
buf[1] = bin2bcd(alrm->time.tm_min);
|
|
buf[2] = bin2bcd(alrm->time.tm_hour);
|
|
buf[3] = bin2bcd(alrm->time.tm_mday);
|
|
buf[4] = PCF85063_AEN; /* Do not match on week day */
|
|
|
|
ret = regmap_update_bits(pcf85063->regmap, PCF85063_REG_CTRL2,
|
|
PCF85063_CTRL2_AIE | PCF85063_CTRL2_AF, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_bulk_write(pcf85063->regmap, PCF85063_REG_ALM_S,
|
|
buf, sizeof(buf));
|
|
if (ret)
|
|
return ret;
|
|
|
|
return regmap_update_bits(pcf85063->regmap, PCF85063_REG_CTRL2,
|
|
PCF85063_CTRL2_AIE | PCF85063_CTRL2_AF,
|
|
alrm->enabled ? PCF85063_CTRL2_AIE | PCF85063_CTRL2_AF : PCF85063_CTRL2_AF);
|
|
}
|
|
|
|
static int pcf85063_rtc_alarm_irq_enable(struct device *dev,
|
|
unsigned int enabled)
|
|
{
|
|
struct pcf85063 *pcf85063 = dev_get_drvdata(dev);
|
|
|
|
return regmap_update_bits(pcf85063->regmap, PCF85063_REG_CTRL2,
|
|
PCF85063_CTRL2_AIE,
|
|
enabled ? PCF85063_CTRL2_AIE : 0);
|
|
}
|
|
|
|
static irqreturn_t pcf85063_rtc_handle_irq(int irq, void *dev_id)
|
|
{
|
|
struct pcf85063 *pcf85063 = dev_id;
|
|
unsigned int val;
|
|
int err;
|
|
|
|
err = regmap_read(pcf85063->regmap, PCF85063_REG_CTRL2, &val);
|
|
if (err)
|
|
return IRQ_NONE;
|
|
|
|
if (val & PCF85063_CTRL2_AF) {
|
|
rtc_update_irq(pcf85063->rtc, 1, RTC_IRQF | RTC_AF);
|
|
regmap_update_bits(pcf85063->regmap, PCF85063_REG_CTRL2,
|
|
PCF85063_CTRL2_AIE | PCF85063_CTRL2_AF,
|
|
0);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static int pcf85063_read_offset(struct device *dev, long *offset)
|
|
{
|
|
struct pcf85063 *pcf85063 = dev_get_drvdata(dev);
|
|
long val;
|
|
u32 reg;
|
|
int ret;
|
|
|
|
ret = regmap_read(pcf85063->regmap, PCF85063_REG_OFFSET, ®);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = sign_extend32(reg & ~PCF85063_OFFSET_MODE,
|
|
PCF85063_OFFSET_SIGN_BIT);
|
|
|
|
if (reg & PCF85063_OFFSET_MODE)
|
|
*offset = val * PCF85063_OFFSET_STEP1;
|
|
else
|
|
*offset = val * PCF85063_OFFSET_STEP0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcf85063_set_offset(struct device *dev, long offset)
|
|
{
|
|
struct pcf85063 *pcf85063 = dev_get_drvdata(dev);
|
|
s8 mode0, mode1, reg;
|
|
unsigned int error0, error1;
|
|
|
|
if (offset > PCF85063_OFFSET_STEP0 * 63)
|
|
return -ERANGE;
|
|
if (offset < PCF85063_OFFSET_STEP0 * -64)
|
|
return -ERANGE;
|
|
|
|
mode0 = DIV_ROUND_CLOSEST(offset, PCF85063_OFFSET_STEP0);
|
|
mode1 = DIV_ROUND_CLOSEST(offset, PCF85063_OFFSET_STEP1);
|
|
|
|
error0 = abs(offset - (mode0 * PCF85063_OFFSET_STEP0));
|
|
error1 = abs(offset - (mode1 * PCF85063_OFFSET_STEP1));
|
|
if (mode1 > 63 || mode1 < -64 || error0 < error1)
|
|
reg = mode0 & ~PCF85063_OFFSET_MODE;
|
|
else
|
|
reg = mode1 | PCF85063_OFFSET_MODE;
|
|
|
|
return regmap_write(pcf85063->regmap, PCF85063_REG_OFFSET, reg);
|
|
}
|
|
|
|
static int pcf85063_ioctl(struct device *dev, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
struct pcf85063 *pcf85063 = dev_get_drvdata(dev);
|
|
int status, ret = 0;
|
|
|
|
switch (cmd) {
|
|
case RTC_VL_READ:
|
|
ret = regmap_read(pcf85063->regmap, PCF85063_REG_SC, &status);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (status & PCF85063_REG_SC_OS)
|
|
dev_warn(&pcf85063->rtc->dev, "Voltage low, data loss detected.\n");
|
|
|
|
status &= PCF85063_REG_SC_OS;
|
|
|
|
if (copy_to_user((void __user *)arg, &status, sizeof(int)))
|
|
return -EFAULT;
|
|
|
|
return 0;
|
|
|
|
case RTC_VL_CLR:
|
|
ret = regmap_update_bits(pcf85063->regmap, PCF85063_REG_SC,
|
|
PCF85063_REG_SC_OS, 0);
|
|
|
|
return ret;
|
|
|
|
default:
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
}
|
|
|
|
static const struct rtc_class_ops pcf85063_rtc_ops = {
|
|
.read_time = pcf85063_rtc_read_time,
|
|
.set_time = pcf85063_rtc_set_time,
|
|
.read_offset = pcf85063_read_offset,
|
|
.set_offset = pcf85063_set_offset,
|
|
.ioctl = pcf85063_ioctl,
|
|
};
|
|
|
|
static const struct rtc_class_ops pcf85063_rtc_ops_alarm = {
|
|
.read_time = pcf85063_rtc_read_time,
|
|
.set_time = pcf85063_rtc_set_time,
|
|
.read_offset = pcf85063_read_offset,
|
|
.set_offset = pcf85063_set_offset,
|
|
.read_alarm = pcf85063_rtc_read_alarm,
|
|
.set_alarm = pcf85063_rtc_set_alarm,
|
|
.alarm_irq_enable = pcf85063_rtc_alarm_irq_enable,
|
|
.ioctl = pcf85063_ioctl,
|
|
};
|
|
|
|
static int pcf85063_nvmem_read(void *priv, unsigned int offset,
|
|
void *val, size_t bytes)
|
|
{
|
|
return regmap_read(priv, PCF85063_REG_RAM, val);
|
|
}
|
|
|
|
static int pcf85063_nvmem_write(void *priv, unsigned int offset,
|
|
void *val, size_t bytes)
|
|
{
|
|
return regmap_write(priv, PCF85063_REG_RAM, *(u8 *)val);
|
|
}
|
|
|
|
static int pcf85063_load_capacitance(struct pcf85063 *pcf85063,
|
|
const struct device_node *np,
|
|
unsigned int force_cap)
|
|
{
|
|
u32 load = 7000;
|
|
u8 reg = 0;
|
|
|
|
if (force_cap)
|
|
load = force_cap;
|
|
else
|
|
of_property_read_u32(np, "quartz-load-femtofarads", &load);
|
|
|
|
switch (load) {
|
|
default:
|
|
dev_warn(&pcf85063->rtc->dev, "Unknown quartz-load-femtofarads value: %d. Assuming 7000",
|
|
load);
|
|
/* fall through */
|
|
case 7000:
|
|
break;
|
|
case 12500:
|
|
reg = PCF85063_REG_CTRL1_CAP_SEL;
|
|
break;
|
|
}
|
|
|
|
return regmap_update_bits(pcf85063->regmap, PCF85063_REG_CTRL1,
|
|
PCF85063_REG_CTRL1_CAP_SEL, reg);
|
|
}
|
|
|
|
static const struct pcf85063_config pcf85063a_config = {
|
|
.regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = 0x11,
|
|
},
|
|
.has_alarms = 1,
|
|
};
|
|
|
|
static const struct pcf85063_config pcf85063tp_config = {
|
|
.regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = 0x0a,
|
|
},
|
|
};
|
|
|
|
static const struct pcf85063_config rv8263_config = {
|
|
.regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = 0x11,
|
|
},
|
|
.has_alarms = 1,
|
|
.force_cap_7000 = 1,
|
|
};
|
|
|
|
static int pcf85063_probe(struct i2c_client *client)
|
|
{
|
|
struct pcf85063 *pcf85063;
|
|
unsigned int tmp;
|
|
int err;
|
|
const struct pcf85063_config *config = &pcf85063tp_config;
|
|
const void *data = of_device_get_match_data(&client->dev);
|
|
struct nvmem_config nvmem_cfg = {
|
|
.name = "pcf85063_nvram",
|
|
.reg_read = pcf85063_nvmem_read,
|
|
.reg_write = pcf85063_nvmem_write,
|
|
.type = NVMEM_TYPE_BATTERY_BACKED,
|
|
.size = 1,
|
|
};
|
|
|
|
dev_dbg(&client->dev, "%s\n", __func__);
|
|
|
|
pcf85063 = devm_kzalloc(&client->dev, sizeof(struct pcf85063),
|
|
GFP_KERNEL);
|
|
if (!pcf85063)
|
|
return -ENOMEM;
|
|
|
|
if (data)
|
|
config = data;
|
|
|
|
pcf85063->regmap = devm_regmap_init_i2c(client, &config->regmap);
|
|
if (IS_ERR(pcf85063->regmap))
|
|
return PTR_ERR(pcf85063->regmap);
|
|
|
|
i2c_set_clientdata(client, pcf85063);
|
|
|
|
err = regmap_read(pcf85063->regmap, PCF85063_REG_CTRL1, &tmp);
|
|
if (err) {
|
|
dev_err(&client->dev, "RTC chip is not present\n");
|
|
return err;
|
|
}
|
|
|
|
pcf85063->rtc = devm_rtc_allocate_device(&client->dev);
|
|
if (IS_ERR(pcf85063->rtc))
|
|
return PTR_ERR(pcf85063->rtc);
|
|
|
|
err = pcf85063_load_capacitance(pcf85063, client->dev.of_node,
|
|
config->force_cap_7000 ? 7000 : 0);
|
|
if (err < 0)
|
|
dev_warn(&client->dev, "failed to set xtal load capacitance: %d",
|
|
err);
|
|
|
|
pcf85063->rtc->ops = &pcf85063_rtc_ops;
|
|
pcf85063->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
|
|
pcf85063->rtc->range_max = RTC_TIMESTAMP_END_2099;
|
|
pcf85063->rtc->uie_unsupported = 1;
|
|
|
|
if (config->has_alarms && client->irq > 0) {
|
|
err = devm_request_threaded_irq(&client->dev, client->irq,
|
|
NULL, pcf85063_rtc_handle_irq,
|
|
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
|
|
"pcf85063", pcf85063);
|
|
if (err) {
|
|
dev_warn(&pcf85063->rtc->dev,
|
|
"unable to request IRQ, alarms disabled\n");
|
|
} else {
|
|
pcf85063->rtc->ops = &pcf85063_rtc_ops_alarm;
|
|
device_init_wakeup(&client->dev, true);
|
|
err = dev_pm_set_wake_irq(&client->dev, client->irq);
|
|
if (err)
|
|
dev_err(&pcf85063->rtc->dev,
|
|
"failed to enable irq wake\n");
|
|
}
|
|
}
|
|
|
|
nvmem_cfg.priv = pcf85063->regmap;
|
|
rtc_nvmem_register(pcf85063->rtc, &nvmem_cfg);
|
|
|
|
return rtc_register_device(pcf85063->rtc);
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id pcf85063_of_match[] = {
|
|
{ .compatible = "nxp,pcf85063", .data = &pcf85063tp_config },
|
|
{ .compatible = "nxp,pcf85063tp", .data = &pcf85063tp_config },
|
|
{ .compatible = "nxp,pcf85063a", .data = &pcf85063a_config },
|
|
{ .compatible = "microcrystal,rv8263", .data = &rv8263_config },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, pcf85063_of_match);
|
|
#endif
|
|
|
|
static struct i2c_driver pcf85063_driver = {
|
|
.driver = {
|
|
.name = "rtc-pcf85063",
|
|
.of_match_table = of_match_ptr(pcf85063_of_match),
|
|
},
|
|
.probe_new = pcf85063_probe,
|
|
};
|
|
|
|
module_i2c_driver(pcf85063_driver);
|
|
|
|
MODULE_AUTHOR("Søren Andersen <san@rosetechnology.dk>");
|
|
MODULE_DESCRIPTION("PCF85063 RTC driver");
|
|
MODULE_LICENSE("GPL");
|